summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-12-19accel/habanalabs/gaudi2: use correct registers to dump QM CQ infoTomer Tayar
The QM CQ PTR_LO/PTR_HI/TSIZE registers are for pushing a CQ entry, and although they are updated by HW even when descriptors are fetched by PQ and CB addresses are fed into CQ, the correct registers to use when dumping the CQ info are the ones with the _STS suffix. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-12-19accel/habanalabs: expose module id through sysfsDani Liberman
Module ID exposes the physical location of the device in the server, from the pov of the devices in regard to how they are connected by internal fabric. This information is already exposed in our INFO ioctl, but there are utilities and scripts running in data-center which are already accessing sysfs for topology information and it is easier for them to continue getting that information from sysfs instead of opening a file descriptor. Signed-off-by: Dani Liberman <dliberman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-12-19accel/habanalabs: print error code when mapping failsDani Liberman
Failure to map is considered a non-trivial error and we need to notify the user about it. Signed-off-by: Dani Liberman <dliberman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-12-19accel/habanalabs/gaudi2: get the correct QM CQ info upon an errorTomer Tayar
Upon a QM error, the address/size from both the CQ and the ARC_CQ are printed, although the instruction that led to the error was received from only one of them. Moreover, in case of a QM undefined opcode, only one of these address/size sets will be captured based on the value of ARC_CQ_PTR. However, this value can be non-zero even if currently the CQ is used, in case the CQ/ARC_CQ are alternately used. Under the assumption of having a stop-on-error configuration, modify to use CP_STS.CUR_CQ field to get the relevant CQ for the QM error. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-12-19accel/habanalabs: set hard reset flag if graceful reset is skippedTomer Tayar
hl_device_cond_reset() might be called with the hard reset flag unset, because a compute reset upon device release as part of a graceful reset is valid. If the conditions for graceful reset are not met, hl_device_reset() will be called for an immediate reset. In this case a compute reset is not valid, so it will be replaced with a hard reset together with a debug message about it. This message might be confusing, as it implies that a compute reset was requested when it shouldn't. To prevent this confusion, set the hard reset flag in hl_device_cond_reset() if going to an immediate reset. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-12-19accel/habanalabs: remove 'get temperature' debug printOfir Bitton
The print was added long back for a specific debug and can now be removed. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-12-19accel/habanalabs/gaudi2: fix undef opcode reportingDafna Hirschfeld
currently the undefined opcode event bit in set only for lower cp and only if 'write_enable' is true. It should be set anyway and for all streams in order to report that event to userspace. Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-12-19accel/habanalabs: fix EQ heartbeat mechanismFarah Kassabri
Stop rescheduling another heartbeat check when EQ heartbeat check fails as it generates confusing logs in dmesg that the heartbeat fails. Signed-off-by: Farah Kassabri <fkassabri@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-12-19accel/habanalabs: add support for Gaudi2C deviceOded Gabbay
Gaudi2 with PCI revision ID with the value of '3' represents Gaudi2C device and should be detected and initialized as Gaudi2. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-12-19accel/habanalabs: add log when eq event is not receivedFarah Kassabri
Add error log when no eq event is received from FW, to cover a scenario when FW is stuck for some reason. In such case driver will not receive neither the eq error interrupt or the eq heartbeat event, and will just initiate a reset without indication in the dmesg about the reason. Signed-off-by: Farah Kassabri <fkassabri@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-12-19accel/habanalabs/gaudi2: assume hard-reset by FW upon PCIe AXI drainTomer Tayar
When a PCIe AXI drain event happens, it is possible that the driver cannot access the device through PCIe, and therefore cannot send a hard-reset request to FW. Starting from FW version 1.13, FW will initiate a hard-reset in such a case without waiting for a reset request from the driver. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-12-19accel/habanalabs: update device boot error checkFarah Kassabri
Use a predefined mask which set the device critical boot errors. Driver will fail and stop its loading, only upon detecting at least one of those errors defined in this mask. Signed-off-by: Farah Kassabri <fkassabri@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-12-19accel/habanalabs: add pcie reset prepare/done hooksfarah kassabri
When working on a bare-metal system, if FLR will happen the firmware will handle it and driver will have no knowledge of it, and this will cause two issues: 1.The driver will be in operational state while it should be in reset. This will cause the heartbeat mechanism to keep sending messages to FW while pci device is in reset. Eventually heartbeat will fail and the device will end up in non-operational state. 2. After FW handles the FLR, and due to the reset it'll go back to preboot stage, and driver need to perform hard reset in order to load the boot fit binary. This patch will add reset_prepare hook that will set the device to be in disabled state, so it'll be not operational, and also reset_done hook which will be called after the actual FLR handling, then it will perform hard reset. Signed-off-by: farah kassabri <fkassabri@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-12-13Merge tag 'amd-drm-next-6.8-2023-12-08' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.8-2023-12-08: amdgpu: - SR-IOV fixes - DCN 3.5 updates - Backlight fixes - MST fixes - DMCUB fixes - DPIA fixes - Display powergating updates - Enable writeback connectors - Misc code cleanups - Add more register state debugging for aquavanjaram - Suspend fix - Clockgating fixes - SMU 14 updates - PSR fixes - MES logging updates - Misc fixes amdkfd: - SVM fix radeon: - Fix potential memory leaks in error paths Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231208205613.4861-1-alexander.deucher@amd.com
2023-12-13Merge tag 'drm-intel-gt-next-2023-12-08' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - drm/i915: Implement fdinfo memory stats printing Use the newly added drm_print_memory_stats helper to show memory utilisation of our objects in drm/driver specific fdinfo output. To collect the stats we walk the per memory regions object lists and accumulate object size into the respective drm_memory_stats categories. Cross-subsystem Changes: - Backmerge of drm-next (to bring drm-intel-next for PXP changes) Driver Changes: - Wa_18028616096 now applies to all DG2 (Matt R) - Drop Wa_22014600077 on all DG2 (Matt R) - Add new ATS-M device ID (Haridhar) - More Meteorlake (MTL) workarounds (Matt R, Dnyaneshwar, Jonathan, Gustavo, Radhakrishna) - PMU WARN_ON cleanup on driver unbind (Umesh) - Limit GGTT WC flushing workaround to pre BXT/ICL platforms - Complement implementation for Wa_16018031267 / Wa_16018063123 (Andrzej, Jonathan, Nirmoy, Chris) - Properly print internal GSC engine in trace logs (Tvrtko) - Track gt pm wakerefs (Andrzej) - Fix null deref bugs on perf code when perf is disabled (Harshit, Tvrtko) - Fix __i915_request_create memory leak on driver unbind (Andrzej) - Remove spurious unsupported HuC message on MTL (Daniele) - Read a shadowed mmio register for ggtt flush (Vinay) - Add missing new-line to GT_TRACE (Andrzej) - Add drm_dbgs for critical PXP events (Alan) - Skip pxp init if gt is wedged (Zhanjun) - Replace custom intel runtime_pm tracker with ref_tracker library (Andrzej) - Compiler warning/static checker/coding style cleanups (Arnd, Nirmoy, Soumya, Gilbert, Dorcas, Kunwu, Sam, Tvrtko) - Code structure and helper cleanups (Jani, Tvrtko, Andi) - Selftest improvements (John, Tvrtko, Andrzej) Signed-off-by: Dave Airlie <airlied@redhat.com> # Conflicts: # drivers/gpu/drm/i915/gt/intel_gt_mcr.c From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZXNBcsSwJEVsq9On@jlahtine-mobl.ger.corp.intel.com
2023-12-13Merge tag 'exynos-drm-next-for-v6.8' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next One bug fix - Add a missing call to drm_atomic_helper_shutdown() in Exynos DRM driver. This function is necessary during system shutdown and when the driver is unbound. Without this function, components like panels may not shut down properly, potentially leading to power issue as mentioned in the kernel documentation, specially in the "driver instance overview" secstion of 'drm_drv.c'. Two cleanups - Convert '.remove()' callback function in the Exynos DRM platform driver to a version that returns void instead of an integer. - Change connector type of exynos_drm_dpi.c module to DPI. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231212051134.48524-1-inki.dae@samsung.com
2023-12-12drm/exynos: dpi: Change connector type to DPIPaul Cercueil
When exynos_drm_dpi.c was written, DRM_MODE_CONNECTOR_DPI did not exist yet and I guess that's the reason why DRM_MODE_CONNECTOR_VGA was used as the connector type. However, now it makes more sense to use DRM_MODE_CONNECTOR_DPI as the connector type. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2023-12-12drm/exynos: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> fix merge conflict and drop duplicated patch description. Signed-off-by: Inki Dae <inki.dae@samsung.com>
2023-12-12drm/exynos: Call drm_atomic_helper_shutdown() at shutdown/unbind timeDouglas Anderson
Based on grepping through the source code this driver appears to be missing a call to drm_atomic_helper_shutdown() at system shutdown time and at driver unbind time. Among other things, this means that if a panel is in use that it won't be cleanly powered off at system shutdown time. The fact that we should call drm_atomic_helper_shutdown() in the case of OS shutdown/restart and at driver remove (or unbind) time comes straight out of the kernel doc "driver instance overview" in drm_drv.c. A few notes about this fix: - When adding drm_atomic_helper_shutdown() to the unbind path, I added it after drm_kms_helper_poll_fini() since that's when other drivers seemed to have it. - Technically with a previous patch, ("drm/atomic-helper: drm_atomic_helper_shutdown(NULL) should be a noop"), we don't actually need to check to see if our "drm" pointer is NULL before calling drm_atomic_helper_shutdown(). We'll leave the "if" test in, though, so that this patch can land without any dependencies. It could potentially be removed later. - This patch also makes sure to set the drvdata to NULL in the case of bind errors to make sure that shutdown can't access freed data. Suggested-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2023-12-12Merge tag 'exynos-drm-next-for-v6.7-rc5' of ↵Inki Dae
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into exynos-drm-next Two fixups - Fix a potential error pointer dereference by checking the return value of exynos_drm_crtc_get_by_type() function before accessing to crtc object. - Fix a wrong error checking in exynos_drm_dma.c modules, which was reported by Dan[1] [1] https://lore.kernel.org/all/33e52277-1349-472b-a55b-ab5c3462bfcf@moroto.mountain/
2023-12-12Backmerge tag 'v6.7-rc5' into drm-nextDave Airlie
Linux 6.7-rc5 Alex requested this for some amdkfd work relying on the symbols exports. Signed-off-by: Dave Airlie <airlied@redhat.com>
2023-12-10Linux 6.7-rc5v6.7-rc5Linus Torvalds
2023-12-10Merge tag 'sched_urgent_for_v6.7_rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Borislav Petkov: - Make sure tasks are thawed exactly and only once to avoid their state getting corrupted * tag 'sched_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: freezer,sched: Do not restore saved_state of a thawed task
2023-12-10Merge tag 'perf_urgent_for_v6.7_rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf event fix from Borislav Petkov: - Make sure perf event size validation is done on every event in the group * tag 'perf_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix perf_event_validate_size()
2023-12-10Merge tag 'x86_urgent_for_v6.7_rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Add a forgotten CPU vendor check in the AMD microcode post-loading callback so that the callback runs only on AMD - Make sure SEV-ES protocol negotiation happens only once and on the BSP * tag 'x86_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/CPU/AMD: Check vendor in the AMD microcode callback x86/sev: Fix kernel crash due to late update to read-only ghcb_version
2023-12-10Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "Generic: - Set .owner for various KVM file_operations so that files refcount the KVM module until KVM is done executing _all_ code, including the last few instructions of kvm_put_kvm(). And then revert the misguided attempt to rely on "struct kvm" refcounts to pin KVM-the-module. ARM: - Do not redo the mapping of vLPIs, if they have already been mapped s390: - Do not leave bits behind in PTEs - Properly catch page invalidations that affect the prefix of a nested guest x86: - When checking if a _running_ vCPU is "in-kernel", i.e. running at CPL0, get the CPL directly instead of relying on preempted_in_kernel (which is valid if and only if the vCPU was preempted, i.e. NOT running). - Fix a benign "return void" that was recently introduced. Selftests: - Makefile tweak for dependency generation - '-Wformat' fix" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SVM: Update EFER software model on CR0 trap for SEV-ES KVM: selftests: add -MP to CFLAGS KVM: selftests: Actually print out magic token in NX hugepages skip message KVM: x86: Remove 'return void' expression for 'void function' Revert "KVM: Prevent module exit until all VMs are freed" KVM: Set file_operations.owner appropriately for all such structures KVM: x86: Get CPL directly when checking if loaded vCPU is in kernel mode KVM: arm64: GICv4: Do not perform a map to a mapped vLPI KVM: s390/mm: Properly reset no-dat KVM: s390: vsie: fix wrong VIR 37 when MSO is used
2023-12-09Merge tag 'powerpc-6.7-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: - Fix stack teardown in ftrace_no_trace, seen as crashes doing CPU hotplug while ftrace is active. Thanks to Naveen N Rao. * tag 'powerpc-6.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/ftrace: Fix stack teardown in ftrace_no_trace
2023-12-09Merge tag 'gpio-fixes-for-v6.7-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fix from Bartosz Golaszewski: - fix an error path after a failed export in sysfs code * tag 'gpio-fixes-for-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpiolib: sysfs: Fix error handling on failed export
2023-12-09Merge tag 'usb-6.7-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 6.7-rc5 to resolve some reported issues. Included in here are: - usb gadget f_hid, and uevent fix - xhci driver revert to resolve a much-reported issue - typec driver fix All of these have been in linux-next with no reported issues" * tag 'usb-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: gadget: f_hid: fix report descriptor allocation Revert "xhci: Loosen RPM as default policy to cover for AMD xHC 1.1" usb: typec: class: fix typec_altmode_put_partner to put plugs USB: gadget: core: adjust uevent timing on gadget unbind
2023-12-09Merge tag 'tty-6.7-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fixes from Greg KH: "Here are some small serial driver fixes for 6.7-rc4 to resolve some reported issues. Included in here are: - pl011 dma support fix - sc16is7xx driver fix - ma35d1 console index fix - 8250 driver fixes for small issues All of these have been in linux-next with no reported issues" * tag 'tty-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250_dw: Add ACPI ID for Granite Rapids-D UART serial: ma35d1: Validate console index before assignment ARM: PL011: Fix DMA support serial: sc16is7xx: address RX timeout interrupt errata serial: 8250: 8250_omap: Clear UART_HAS_RHR_IT_DIS bit serial: 8250_omap: Add earlycon support for the AM654 UART controller serial: 8250: 8250_omap: Do not start RX DMA on THRI interrupt
2023-12-09Merge tag 'char-misc-6.7-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver fixes from Greg KH: "Here are some small fixes for 6.7-rc5 for a variety of small driver subsystems. Included in here are: - debugfs revert for reported issue - greybus revert for reported issue - greybus fixup for endian build warning - coresight driver fixes - nvmem driver fixes - devcoredump fix - parport new device id - ndtest build fix All of these have ben in linux-next with no reported issues" * tag 'char-misc-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: nvmem: Do not expect fixed layouts to grab a layout driver parport: Add support for Brainboxes IX/UC/PX parallel cards Revert "greybus: gb-beagleplay: Ensure le for values in transport" greybus: gb-beagleplay: Ensure le for values in transport greybus: BeaglePlay driver needs CRC_CCITT Revert "debugfs: annotate debugfs handlers vs. removal with lockdep" devcoredump: Send uevent once devcd is ready ndtest: fix typo class_regster -> class_register misc: mei: client.c: fix problem of return '-EOVERFLOW' in mei_cl_write misc: mei: client.c: return negative error code in mei_cl_write mei: pxp: fix mei_pxp_send_message return value coresight: ultrasoc-smb: Fix uninitialized before use buf_hw_base coresight: ultrasoc-smb: Config SMB buffer before register sink coresight: ultrasoc-smb: Fix sleep while close preempt in enable_smb Documentation: coresight: fix `make refcheckdocs` warning hwtracing: hisi_ptt: Don't try to attach a task hwtracing: hisi_ptt: Handle the interrupt in hardirq context hwtracing: hisi_ptt: Add dummy callback pmu::read() coresight: Fix crash when Perf and sysfs modes are used concurrently coresight: etm4x: Remove bogous __exit annotation for some functions
2023-12-09Merge tag 'loongarch-fixes-6.7-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Preserve syscall nr across execve(), slightly clean up drdtime(), fix the Clang built zboot kernel, fix a stack unwinder bug and several bpf jit bugs" * tag 'loongarch-fixes-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: BPF: Fix unconditional bswap instructions LoongArch: BPF: Fix sign-extension mov instructions LoongArch: BPF: Don't sign extend function return value LoongArch: BPF: Don't sign extend memory load operand LoongArch: Preserve syscall nr across execve() LoongArch: Set unwind stack type to unknown rather than set error flag LoongArch: Slightly clean up drdtime() LoongArch: Apply dynamic relocations for LLD
2023-12-09Merge tag 'mips-fixes_6.7_1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - Fixes for broken Loongson firmware - Fix lockdep splat - Fix FPU states when creating kernel threads * tag 'mips-fixes_6.7_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: kernel: Clear FPU states when setting up kernel threads MIPS: Loongson64: Handle more memory types passed from firmware MIPS: Loongson64: Enable DMA noncoherent support MIPS: Loongson64: Reserve vgabios memory on boot mips/smp: Call rcutree_report_cpu_starting() earlier
2023-12-09Merge tag 'perf-tools-fixes-for-v6.7-2-2023-12-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools fixes from Namhyung Kim: "A random set of small bug fixes including: - Fix segfault on AmpereOne due to missing default metricgroup name - Fix segfault on `perf list --json` due to NULL pointer" * tag 'perf-tools-fixes-for-v6.7-2-2023-12-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: perf list: Fix JSON segfault by setting the used skip_duplicate_pmus callback perf vendor events arm64: AmpereOne: Add missing DefaultMetricgroupName fields perf metrics: Avoid segv if default metricgroup isn't set
2023-12-09Merge tag '6.7-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull smb client fixes from Steve French: "Six smb3 client fixes: - Fixes for copy_file_range and clone (cache invalidation and file size), also addresses an xfstest failure - Fix to return proper error if REMAP_FILE_DEDUP set (also fixes xfstest generic/304) - Fix potential null pointer reference with DFS - Multichannel fix addressing (reverting an earlier patch) some of the problems with enabling/disabling channels dynamically Still working on a followon multichannel fix to address another issue found in reconnect testing that will send next week" * tag '6.7-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: reconnect worker should take reference on server struct unconditionally Revert "cifs: reconnect work should have reference on server struct" cifs: Fix non-availability of dedup breaking generic/304 smb: client: fix potential NULL deref in parse_dfs_referrals() cifs: Fix flushing, invalidation and file size with FICLONE cifs: Fix flushing, invalidation and file size with copy_file_range()
2023-12-09LoongArch: BPF: Fix unconditional bswap instructionsTiezhu Yang
We can see that "bswap32: Takes an unsigned 32-bit number in either big- or little-endian format and returns the equivalent number with the same bit width but opposite endianness" in BPF Instruction Set Specification, so it should clear the upper 32 bits in "case 32:" for both BPF_ALU and BPF_ALU64. [root@linux fedora]# echo 1 > /proc/sys/net/core/bpf_jit_enable [root@linux fedora]# modprobe test_bpf Before: test_bpf: #313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times) test_bpf: #317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times) After: test_bpf: #313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 4 PASS test_bpf: #317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 4 PASS Fixes: 4ebf9216e7df ("LoongArch: BPF: Support unconditional bswap instructions") Acked-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-12-09LoongArch: BPF: Fix sign-extension mov instructionsTiezhu Yang
We can see that "Short form of movsx, dst_reg = (s8,s16,s32)src_reg" in include/linux/filter.h, additionally, for BPF_ALU64 the value of the destination register is unchanged whereas for BPF_ALU the upper 32 bits of the destination register are zeroed, so it should clear the upper 32 bits for BPF_ALU. [root@linux fedora]# echo 1 > /proc/sys/net/core/bpf_jit_enable [root@linux fedora]# modprobe test_bpf Before: test_bpf: #81 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #82 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) After: test_bpf: #81 ALU_MOVSX | BPF_B jited:1 6 PASS test_bpf: #82 ALU_MOVSX | BPF_H jited:1 6 PASS By the way, the bpf selftest case "./test_progs -t verifier_movsx" can also be fixed with this patch. Fixes: f48012f16150 ("LoongArch: BPF: Support sign-extension mov instructions") Acked-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-12-09LoongArch: BPF: Don't sign extend function return valueHengqi Chen
The `cls_redirect` test triggers a kernel panic like: # ./test_progs -t cls_redirect Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. [ 30.938489] CPU 3 Unable to handle kernel paging request at virtual address fffffffffd814de0, era == ffff800002009fb8, ra == ffff800002009f9c [ 30.939331] Oops[#1]: [ 30.939513] CPU: 3 PID: 1260 Comm: test_progs Not tainted 6.7.0-rc2-loong-devel-g2f56bb0d2327 #35 a896aca3f4164f09cc346f89f2e09832e07be5f6 [ 30.939732] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 30.939901] pc ffff800002009fb8 ra ffff800002009f9c tp 9000000104da4000 sp 9000000104da7ab0 [ 30.940038] a0 fffffffffd814de0 a1 9000000104da7a68 a2 0000000000000000 a3 9000000104da7c10 [ 30.940183] a4 9000000104da7c14 a5 0000000000000002 a6 0000000000000021 a7 00005555904d7f90 [ 30.940321] t0 0000000000000110 t1 0000000000000000 t2 fffffffffd814de0 t3 0004c4b400000000 [ 30.940456] t4 ffffffffffffffff t5 00000000c3f63600 t6 0000000000000000 t7 0000000000000000 [ 30.940590] t8 000000000006d803 u0 0000000000000020 s9 9000000104da7b10 s0 900000010504c200 [ 30.940727] s1 fffffffffd814de0 s2 900000010504c200 s3 9000000104da7c10 s4 9000000104da7ad0 [ 30.940866] s5 0000000000000000 s6 90000000030e65bc s7 9000000104da7b44 s8 90000000044f6fc0 [ 30.941015] ra: ffff800002009f9c bpf_prog_846803e5ae81417f_cls_redirect+0xa0/0x590 [ 30.941535] ERA: ffff800002009fb8 bpf_prog_846803e5ae81417f_cls_redirect+0xbc/0x590 [ 30.941696] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 30.942224] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 30.942330] EUEN: 00000003 (+FPE +SXE -ASXE -BTE) [ 30.942453] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 30.942612] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 30.942764] BADV: fffffffffd814de0 [ 30.942854] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 30.942974] Modules linked in: [ 30.943078] Process test_progs (pid: 1260, threadinfo=00000000ce303226, task=000000007d10bb76) [ 30.943306] Stack : 900000010a064000 90000000044f6fc0 9000000104da7b48 0000000000000000 [ 30.943495] 0000000000000000 9000000104da7c14 9000000104da7c10 900000010504c200 [ 30.943626] 0000000000000001 ffff80001b88c000 9000000104da7b70 90000000030e6668 [ 30.943785] 0000000000000000 9000000104da7b58 ffff80001b88c048 9000000003d05000 [ 30.943936] 900000000303ac88 0000000000000000 0000000000000000 9000000104da7b70 [ 30.944091] 0000000000000000 0000000000000001 0000000731eeab00 0000000000000000 [ 30.944245] ffff80001b88c000 0000000000000000 0000000000000000 54b99959429f83b8 [ 30.944402] ffff80001b88c000 90000000044f6fc0 9000000101d70000 ffff80001b88c000 [ 30.944538] 000000000000005a 900000010504c200 900000010a064000 900000010a067000 [ 30.944697] 9000000104da7d88 0000000000000000 9000000003d05000 90000000030e794c [ 30.944852] ... [ 30.944924] Call Trace: [ 30.945120] [<ffff800002009fb8>] bpf_prog_846803e5ae81417f_cls_redirect+0xbc/0x590 [ 30.945650] [<90000000030e6668>] bpf_test_run+0x1ec/0x2f8 [ 30.945958] [<90000000030e794c>] bpf_prog_test_run_skb+0x31c/0x684 [ 30.946065] [<90000000026d4f68>] __sys_bpf+0x678/0x2724 [ 30.946159] [<90000000026d7288>] sys_bpf+0x20/0x2c [ 30.946253] [<90000000032dd224>] do_syscall+0x7c/0x94 [ 30.946343] [<9000000002541c5c>] handle_syscall+0xbc/0x158 [ 30.946492] [ 30.946549] Code: 0015030e 5c0009c0 5001d000 <28c00304> 02c00484 29c00304 00150009 2a42d2e4 0280200d [ 30.946793] [ 30.946971] ---[ end trace 0000000000000000 ]--- [ 32.093225] Kernel panic - not syncing: Fatal exception in interrupt [ 32.093526] Kernel relocated by 0x2320000 [ 32.093630] .text @ 0x9000000002520000 [ 32.093725] .data @ 0x9000000003400000 [ 32.093792] .bss @ 0x9000000004413200 [ 34.971998] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- This is because we signed-extend function return values. When subprog mode is enabled, we have: cls_redirect() -> get_global_metrics() returns pcpu ptr 0xfffffefffc00b480 The pointer returned is later signed-extended to 0xfffffffffc00b480 at `BPF_JMP | BPF_EXIT`. During BPF prog run, this triggers unhandled page fault and a kernel panic. Drop the unnecessary signed-extension on return values like other architectures do. With this change, we have: # ./test_progs -t cls_redirect Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. #51/1 cls_redirect/cls_redirect_inlined:OK #51/2 cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK #51/3 cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK #51/4 cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK #51/5 cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK #51/6 cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK #51/7 cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK #51/8 cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK #51/9 cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK #51/10 cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK #51/11 cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK #51/12 cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK #51/13 cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK #51/14 cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK #51/15 cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK #51/16 cls_redirect/cls_redirect_subprogs:OK #51/17 cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK #51/18 cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK #51/19 cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK #51/20 cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK #51/21 cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK #51/22 cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK #51/23 cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK #51/24 cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK #51/25 cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK #51/26 cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK #51/27 cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK #51/28 cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK #51/29 cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK #51/30 cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK #51/31 cls_redirect/cls_redirect_dynptr:OK #51/32 cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK #51/33 cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK #51/34 cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK #51/35 cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK #51/36 cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK #51/37 cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK #51/38 cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK #51/39 cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK #51/40 cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK #51/41 cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK #51/42 cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK #51/43 cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK #51/44 cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK #51/45 cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK #51 cls_redirect:OK Summary: 1/45 PASSED, 0 SKIPPED, 0 FAILED Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support") Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-12-09LoongArch: BPF: Don't sign extend memory load operandHengqi Chen
The `cgrp_local_storage` test triggers a kernel panic like: # ./test_progs -t cgrp_local_storage Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. [ 550.930632] CPU 1 Unable to handle kernel paging request at virtual address 0000000000000080, era == ffff80000200be34, ra == ffff80000200be00 [ 550.931781] Oops[#1]: [ 550.931966] CPU: 1 PID: 1303 Comm: test_progs Not tainted 6.7.0-rc2-loong-devel-g2f56bb0d2327 #35 a896aca3f4164f09cc346f89f2e09832e07be5f6 [ 550.932215] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 550.932403] pc ffff80000200be34 ra ffff80000200be00 tp 9000000108350000 sp 9000000108353dc0 [ 550.932545] a0 0000000000000000 a1 0000000000000517 a2 0000000000000118 a3 00007ffffbb15558 [ 550.932682] a4 00007ffffbb15620 a5 90000001004e7700 a6 0000000000000021 a7 0000000000000118 [ 550.932824] t0 ffff80000200bdc0 t1 0000000000000517 t2 0000000000000517 t3 00007ffff1c06ee0 [ 550.932961] t4 0000555578ae04d0 t5 fffffffffffffff8 t6 0000000000000004 t7 0000000000000020 [ 550.933097] t8 0000000000000040 u0 00000000000007b8 s9 9000000108353e00 s0 90000001004e7700 [ 550.933241] s1 9000000004005000 s2 0000000000000001 s3 0000000000000000 s4 0000555555eb2ec8 [ 550.933379] s5 00007ffffbb15bb8 s6 00007ffff1dafd60 s7 000055555663f610 s8 00007ffff1db0050 [ 550.933520] ra: ffff80000200be00 bpf_prog_98f1b9e767be2a84_on_enter+0x40/0x200 [ 550.933911] ERA: ffff80000200be34 bpf_prog_98f1b9e767be2a84_on_enter+0x74/0x200 [ 550.934105] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 550.934596] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 550.934712] EUEN: 00000003 (+FPE +SXE -ASXE -BTE) [ 550.934836] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 550.934976] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 550.935097] BADV: 0000000000000080 [ 550.935181] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 550.935291] Modules linked in: [ 550.935391] Process test_progs (pid: 1303, threadinfo=000000006c3b1c41, task=0000000061f84a55) [ 550.935643] Stack : 00007ffffbb15bb8 0000555555eb2ec8 0000000000000000 0000000000000001 [ 550.935844] 9000000004005000 ffff80001b864000 00007ffffbb15450 90000000029aa034 [ 550.935990] 0000000000000000 9000000108353ec0 0000000000000118 d07d9dfb09721a09 [ 550.936175] 0000000000000001 0000000000000000 9000000108353ec0 0000000000000118 [ 550.936314] 9000000101d46ad0 900000000290abf0 000055555663f610 0000000000000000 [ 550.936479] 0000000000000003 9000000108353ec0 00007ffffbb15450 90000000029d7288 [ 550.936635] 00007ffff1dafd60 000055555663f610 0000000000000000 0000000000000003 [ 550.936779] 9000000108353ec0 90000000035dd1f0 00007ffff1dafd58 9000000002841c5c [ 550.936939] 0000000000000119 0000555555eea5a8 00007ffff1d78780 00007ffffbb153e0 [ 550.937083] ffffffffffffffda 00007ffffbb15518 0000000000000040 00007ffffbb15558 [ 550.937224] ... [ 550.937299] Call Trace: [ 550.937521] [<ffff80000200be34>] bpf_prog_98f1b9e767be2a84_on_enter+0x74/0x200 [ 550.937910] [<90000000029aa034>] bpf_trace_run2+0x90/0x154 [ 550.938105] [<900000000290abf0>] syscall_trace_enter.isra.0+0x1cc/0x200 [ 550.938224] [<90000000035dd1f0>] do_syscall+0x48/0x94 [ 550.938319] [<9000000002841c5c>] handle_syscall+0xbc/0x158 [ 550.938477] [ 550.938607] Code: 580009ae 50016000 262402e4 <28c20085> 14092084 03a00084 16000024 03240084 00150006 [ 550.938851] [ 550.939021] ---[ end trace 0000000000000000 ]--- Further investigation shows that this panic is triggered by memory load operations: ptr = bpf_cgrp_storage_get(&map_a, task->cgroups->dfl_cgrp, 0, BPF_LOCAL_STORAGE_GET_F_CREATE); The expression `task->cgroups->dfl_cgrp` involves two memory load. Since the field offset fits in imm12 or imm14, we use ldd or ldptrd instructions. But both instructions have the side effect that it will signed-extended the imm operand. Finally, we got the wrong addresses and panics is inevitable. Use a generic ldxd instruction to avoid this kind of issues. With this change, we have: # ./test_progs -t cgrp_local_storage Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec #48/1 cgrp_local_storage/tp_btf:OK test_attach_cgroup:PASS:skel_open 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec libbpf: prog 'update_cookie_tracing': failed to attach: ERROR: strerror_r(-524)=22 test_attach_cgroup:FAIL:prog_attach unexpected error: -524 #48/2 cgrp_local_storage/attach_cgroup:FAIL test_recursion:PASS:skel_open_and_load 0 nsec libbpf: prog 'on_lookup': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'on_lookup': failed to auto-attach: -524 test_recursion:FAIL:skel_attach unexpected error: -524 (errno 524) #48/3 cgrp_local_storage/recursion:FAIL #48/4 cgrp_local_storage/negative:OK #48/5 cgrp_local_storage/cgroup_iter_sleepable:OK test_yes_rcu_lock:PASS:skel_open 0 nsec test_yes_rcu_lock:PASS:skel_load 0 nsec libbpf: prog 'yes_rcu_lock': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'yes_rcu_lock': failed to auto-attach: -524 test_yes_rcu_lock:FAIL:skel_attach unexpected error: -524 (errno 524) #48/6 cgrp_local_storage/yes_rcu_lock:FAIL #48/7 cgrp_local_storage/no_rcu_lock:OK #48 cgrp_local_storage:FAIL All error logs: test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec test_attach_cgroup:PASS:skel_open 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec libbpf: prog 'update_cookie_tracing': failed to attach: ERROR: strerror_r(-524)=22 test_attach_cgroup:FAIL:prog_attach unexpected error: -524 #48/2 cgrp_local_storage/attach_cgroup:FAIL test_recursion:PASS:skel_open_and_load 0 nsec libbpf: prog 'on_lookup': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'on_lookup': failed to auto-attach: -524 test_recursion:FAIL:skel_attach unexpected error: -524 (errno 524) #48/3 cgrp_local_storage/recursion:FAIL test_yes_rcu_lock:PASS:skel_open 0 nsec test_yes_rcu_lock:PASS:skel_load 0 nsec libbpf: prog 'yes_rcu_lock': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'yes_rcu_lock': failed to auto-attach: -524 test_yes_rcu_lock:FAIL:skel_attach unexpected error: -524 (errno 524) #48/6 cgrp_local_storage/yes_rcu_lock:FAIL #48 cgrp_local_storage:FAIL Summary: 0/4 PASSED, 0 SKIPPED, 1 FAILED No panics any more (The test still failed because lack of BPF trampoline which I am actively working on). Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support") Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-12-09LoongArch: Preserve syscall nr across execve()Hengqi Chen
Currently, we store syscall nr in pt_regs::regs[11] and syscall execve() accidentally overrides it during its execution: sys_execve() -> do_execve() -> do_execveat_common() -> bprm_execve() -> exec_binprm() -> search_binary_handler() -> load_elf_binary() -> ELF_PLAT_INIT() ELF_PLAT_INIT() reset regs[11] to 0, so in syscall_exit_to_user_mode() we later get a wrong syscall nr. This breaks tools like execsnoop since it relies on execve() tracepoints. Skip pt_regs::regs[11] reset in ELF_PLAT_INIT() to fix the issue. Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-12-09LoongArch: Set unwind stack type to unknown rather than set error flagJinyang He
During unwinding, unwind_done() is used as an end condition. Normally it unwind to the user stack and then set the stack type to unknown, which is a normal exit. When something unexpected happens in unwind process and we cannot unwind anymore, we should set the error flag, and also set the stack type to unknown to indicate that the unwind process can not continue. The error flag emphasizes that the unwind process produce an unexpected error. There is no unexpected things when we unwind the PT_REGS in the top of IRQ stack and find out that is an user mode PT_REGS. Thus, we should not set error flag and just set stack type to unknown. Reported-by: Hengqi Chen <hengqi.chen@gmail.com> Acked-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-12-09LoongArch: Slightly clean up drdtime()Xi Ruoyao
As we are just discarding the stable clock ID, simply write it into $zero instead of allocating a temporary register. Signed-off-by: Xi Ruoyao <xry111@xry111.site> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-12-09LoongArch: Apply dynamic relocations for LLDWANG Rui
For the following assembly code: .text .global func func: nop .data var: .dword func When linked with `-pie`, GNU LD populates the `var` variable with the pre-relocated value of `func`. However, LLVM LLD does not exhibit the same behavior. This issue also arises with the `kernel_entry` in arch/ loongarch/kernel/head.S: _head: .word MZ_MAGIC /* "MZ", MS-DOS header */ .org 0x8 .dword kernel_entry /* Kernel entry point */ The correct kernel entry from the MS-DOS header is crucial for jumping to vmlinux from zboot. This necessity is why the compressed relocatable kernel compiled by Clang encounters difficulties in booting. To address this problem, it is proposed to apply dynamic relocations to place with `--apply-dynamic-relocs`. Link: https://github.com/ClangBuiltLinux/linux/issues/1962 Signed-off-by: WANG Rui <wangrui@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-12-08Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "One tiny fix to the be2iscsi driver fixing a memory leak in an error leg" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: be2iscsi: Fix a memleak in beiscsi_init_wrb_handle()
2023-12-08Merge tag 'block-6.7-2023-12-08' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: "Nothing major in here, just miscellanous fixes for MD and NVMe: - NVMe pull request via Keith: - Proper nvme ctrl state setting (Keith) - Passthrough command optimization (Keith) - Spectre fix (Nitesh) - Kconfig clarifications (Shin'ichiro) - Frozen state deadlock fix (Bitao) - Power setting quirk (Georg) - MD pull requests via Song: - 6.7 regresisons with recovery/sync (Yu) - Reshape fix (David)" * tag 'block-6.7-2023-12-08' of git://git.kernel.dk/linux: md: split MD_RECOVERY_NEEDED out of mddev_resume nvme-pci: Add sleep quirk for Kingston drives md: fix stopping sync thread md: don't leave 'MD_RECOVERY_FROZEN' in error path of md_set_readonly() md: fix missing flush of sync_work nvme: fix deadlock between reset and scan nvme: prevent potential spectre v1 gadget nvme: improve NVME_HOST_AUTH and NVME_TARGET_AUTH config descriptions nvme-ioctl: move capable() admin check to the end nvme: ensure reset state check ordering nvme: introduce helper function to get ctrl state md/raid6: use valid sector values to determine if an I/O should wait on the reshape
2023-12-08Merge tag 'io_uring-6.7-2023-12-08' of git://git.kernel.dk/linuxLinus Torvalds
Pull io_uring fixes from Jens Axboe: "Two minor fixes for issues introduced in this release cycle, and two fixes for issues or potential issues that are heading to stable. One of these ends up disabling passing io_uring file descriptors via SCM_RIGHTS. There really shouldn't be an overlap between that kind of historic use case and modern usage of io_uring, which is why this was deemed appropriate" * tag 'io_uring-6.7-2023-12-08' of git://git.kernel.dk/linux: io_uring/af_unix: disable sending io_uring over sockets io_uring/kbuf: check for buffer list readiness after NULL check io_uring/kbuf: Fix an NULL vs IS_ERR() bug in io_alloc_pbuf_ring() io_uring: fix mutex_unlock with unreferenced ctx
2023-12-08Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "Primarily rtrs and irdma fixes: - Fix uninitialized value in ib_get_eth_speed() - Fix hns refusing to work if userspace doesn't select the correct congestion control algorithm - Several irdma fixes - unreliable Send Queue Drain, use after free, 64k page size bugs, device removal races - Several rtrs bug fixes - crashes, memory leaks, use after free, bad credit accounting, bogus WARN_ON - Typos and a MAINTAINER update" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/irdma: Avoid free the non-cqp_request scratch RDMA/irdma: Fix support for 64k pages RDMA/irdma: Ensure iWarp QP queue memory is OS paged aligned RDMA/core: Fix umem iterator when PAGE_SIZE is greater then HCA pgsz RDMA/irdma: Fix UAF in irdma_sc_ccq_get_cqe_info() RDMA/bnxt_re: Correct module description string RDMA/rtrs-clt: Remove the warnings for req in_use check RDMA/rtrs-clt: Fix the max_send_wr setting RDMA/rtrs-srv: Destroy path files after making sure no IOs in-flight RDMA/rtrs-srv: Free srv_mr iu only when always_invalidate is true RDMA/rtrs-srv: Check return values while processing info request RDMA/rtrs-clt: Start hb after path_up RDMA/rtrs-srv: Do not unconditionally enable irq MAINTAINERS: Add Chengchang Tang as Hisilicon RoCE maintainer RDMA/irdma: Add wait for suspend on SQD RDMA/irdma: Do not modify to SQD on error RDMA/hns: Fix unnecessary err return when using invalid congest control algorithm RDMA/core: Fix uninit-value access in ib_get_eth_speed()
2023-12-08Merge tag 'pm-6.7-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix cpufreq reference counting in the DTPM (dynamic thermal and power management) power capping framework (Lukasz Luba)" * tag 'pm-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: powercap: DTPM: Fix missing cpufreq_cpu_put() calls
2023-12-08Merge tag 'acpi-6.7-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Fix a possible crash on an attempt to free unallocated memory in the error path of acpi_evaluate_reference() that has been introduced by one of the recent changes (Rafael Wysocki)" * tag 'acpi-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: utils: Fix error path in acpi_evaluate_reference()
2023-12-08Merge tag 'hwmon-for-v6.7-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - acpi_power_meter: Fix 4.29 MW output seen if acpi reports bad data - corsair-psu: Fix ability to probe if the driver is built into the kernel - ltc2991: Fix spelling mistake "contiuous" -> "continuous" - max31827: Add missing regulator header file include - nzxt-kraken2: Fix error handling path in probe function * tag 'hwmon-for-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (corsair-psu) Fix probe when built-in hwmon: (nzxt-kraken2) Fix error handling path in kraken2_probe() hwmon: (acpi_power_meter) Fix 4.29 MW bug hwmon: max31827: include regulator header hwmon: ltc2991: Fix spelling mistake "contiuous" -> "continuous"
generated by cgit (git 2.34.1) at 2025-07-15 11:30:45 +0000