summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-02-02ARM: 7306/1: vfp: flush thread hwstate before restoring context from sigframeWill Deacon
Following execution of a signal handler, we currently restore the VFP context from the ucontext in the signal frame. This involves copying from the user stack into the current thread's vfp_hard_struct and then flushing the new data out to the hardware registers. This is problematic when using a preemptible kernel because we could be context switched whilst updating the vfp_hard_struct. If the current thread has made use of VFP since the last context switch, the VFP notifier will copy from the hardware registers into the vfp_hard_struct, overwriting any data that had been partially copied by the signal code. Disabling preemption across copy_from_user calls is a terrible idea, so instead we move the VFP thread flush *before* we update the vfp_hard_struct. Since the flushing is performed lazily, this has the effect of disabling VFP and clearing the CPU's VFP state pointer, therefore preventing the thread from being updated with stale data on the next context switch. Cc: stable <stable@vger.kernel.org> Tested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-02Revert "ARM: 7304/1: ioremap: fix boundary check when reusing static mapping"Russell King
This reverts commit 3c424f359898aff48c3d5bed608ac706f8a528c3. Joachim Eastwood reports: | "ARM: 7304/1: ioremap: fix boundary check when reusing static mapping" | Commit: 3c424f359898aff48c3d5bed608ac706f8a528c3 in Linus master | | Breaks booting on my custom AT91RM9200 board. | There isn't any error messages or anything that indicates what goes | wrong it just stops after; Uncompressing Linux... done, booting the | kernel. | | Reverting it makes my board boot again. and further debugging reveals: ioremap: pfn=fffff phys=fffff000 offset=400 size=1000 ioremap: area c3ffdfc0: phys_addr=200000 pfn=200 size=4000 ioremap: found: addr fef74000 => fed73000 => fed73400 Clearly, an area for pfn 0x200, 16K can't ever satisfy a request for pfn 0xfffff. This happens because the changed if statement becomes: if (0x00200 > 0xfffff || 0xfffff000 + 0x400 + 0x1000-1 > 0x00200000 + 0x4000-1) and therefore: if (0x00200 > 0xfffff || 0x000003ff > 0x00203fff) The if condition fails, and so we _believe_ that the SRAM mapping fits our request. Clearly that's totally bogus. Moreover, the original premise of the 'fix' patch was wrong: | The condition checking boundaries of the requested and existing | mappings didn't take in-page offset into consideration though, | which lead to obscure and hard to debug problems when requested | mapping crossed end of the static one. as the code immediately above this loop does: size = PAGE_ALIGN(offset + size); so 'size' already contains the requested offset into the page. So, revert the broken 'fix'. Acked-by: Nicolas Pitre <nico@linaro.org>
2012-02-02drm/radeon/kms/blit: fix blit copy for very large buffersIlija Hadzic
Evergreen and NI blit copy was broken if the buffer maps to a rectangle whose one dimension is 16384 (max dimension allowed by these chips). In the mainline kernel, the problem is exposed only when buffers are very large (1G), but it's still a problem. The problem could be exposed for smaller buffers if anyone modifies the algorithm for rectangle construction in r600_blit_create_rect() (the reason why someone would modify that algorithm is to tune the performance of buffer moves). The root cause was in i2f() function which only operated on range between 0 and 16383. Fix this by extending the range of i2f() function to 0 to 32767. While at it improve the function so that the range can be easily extended in the future (if it becomes necessary), cleanup lines over 80 characters, and replace in-line comments with one strategic comment that explains the crux of the function. Credits to michel@daenzer.net for pointing out the root cause of the bug. v2: Fix I2F_MAX_INPUT constant definition goof and warn only once if input argument is out of range. Edit the comment a little bit to avoid some linguistic confusion and make it look better in general. Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel@daenzer.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-02drm/radeon/kms: fix TRAVIS panel setupAlex Deucher
Different versions of the DP to LVDS bridge chip need different panel mode settings depending on the chip version used. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=41569 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-02drm/radeon: fix use after free in ATRM bios reading code.Dave Airlie
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=45503 Reported-and-Debugged-by: mlambda@gmail.com Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-02ALSA: hda - Disable dynamic-power control for VIA as defaultTakashi Iwai
Since the dynamic pin power-control and the analog low-current mode may lead to pop-noise, it's safer to set it off as default. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=741128 Cc: <stable@kernel.org> [v3.1+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-02ALSA: hda - Allow analog low-current mode when dynamic power-control is onTakashi Iwai
VIA codecs have several different power-saving features, and one of them is the analog low-current mode. But it turned out that the ALC mode causes pop-noises at each on/off time on some machines. As a quick workaround, disable the ALC when another power-saving feature, the dynamic pin power-control, is turned off, too, since the dynamic power-control is already exposed as a mixer enum element so that user can turn it on/off freely. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=741128 Cc: <stable@kernel.org> [v3.1+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-02ALSA: hda - Fix the logic to detect VIA analog low-current modeTakashi Iwai
The analog low-current mode must be enabled when the no stream is running but the current detection checks it in a wrong way. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=741128 Cc: <stable@kernel.org> [v3.1+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-02ALSA: hda - Check power-state before changing in patch_via.cTakashi Iwai
Instead of always writing AC_VERB_SET_POWER_STATE, check the current power-state and don't write again if the value is already set. This may reduce the click noise upon the dynamic power-state change (e.g. in analog-input mixer). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-02i.MX SDMA: Fix burstsize settingsPhilippe Rétornaz
Commit 6584cb88 (ARM i.MX dma: Fix burstsize settings) fixed the mxcmmc driver but forgot to fix the SDMA driver to handle the correct burtsize. This make the SD card access works again with DMA on i.MX31 boards. Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-01Merge tag 'firewire-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 firewire fixes post v3.3-rc1 Add workarounds table entries for hardware bugs in - FireWire part of Sound Blaster Audigy cards, - Ricoh PCIe 1394 controllers. Without these, several protocols, e.g. AV/C, do not work on the Audigy, and the Ricoh PCIe controllers wouldn't work at all. This does not concern the older Ricoh PCI controllers. * tag 'firewire-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: ohci: disable MSI on Ricoh controllers firewire: ohci: add reset packet quirk for SB Audigy
2012-02-01staging: fix go7007-usb licenseRandy Dunlap
Add MODULE_LICENSE() as per the license in the comment at the top of the file for this source module to fix build warning: WARNING: modpost: missing MODULE_LICENSE() in drivers/staging/media/go7007/go7007-usb.o see include/linux/module.h for more information Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Ross Cohen <rcohen@snurgle.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-01docbook: fix fatal errors in device-drivers docbook and add DMA Management ↵Randy Dunlap
section Fix 2 fatal errors in the device-drivers docbook. Also add some missing files from drivers/base/; since several of these are DMA-related, add a section for DMA Management. docproc: drivers/base/sys.c: No such file or directory docproc: drivers/tty/serial/8250.c: No such file or directory Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-01Merge branch 'for-linus2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: lib: Fix 32-bit sparc udiv_qrnnd() definition in mpilib's longlong.h lib: Fix multiple definitions of clz_tab lib/digsig: checks for NULL return value lib/mpi: added missing NULL check lib/mpi: added comment on divide by 0 case lib/mpi: check for possible zero length lib/digsig: pkcs_1_v1_5_decode_emsa cleanup lib/digsig: additional sanity checks against badly formated key payload lib/mpi: removed unused functions lib/mpi: checks for zero divisor length lib/mpi: return error code on dividing by zero lib/mpi: replaced MPI_NULL with normal NULL lib/mpi: added missing NULL check
2012-02-02lib: Fix 32-bit sparc udiv_qrnnd() definition in mpilib's longlong.hDavid Miller
This copy of longlong.h is extremely dated and results in compile errors on sparc32 when MPILIB is enabled, copy over the more uptodate implementation from arch/sparc/math/sfp-util_32.h Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: James Morris <jmorris@namei.org>
2012-02-02lib: Fix multiple definitions of clz_tabDavid Miller
Both sparc 32-bit's software divide assembler and MPILIB provide clz_tab[] with identical contents. Break it out into a seperate object file and select it when SPARC32 or MPILIB is set. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: James Morris <jmorris@namei.org>
2012-02-01Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband InfiniBand/RDMA fixes for 3.3: - Fix a crash due to a regression (uninitialized refcnt) introduced in 3.2 with XRC support. - Close race in how ucma reports events when connect fails. - Process vendor-specific MADs in mlx4 so that eg FDR-10 data rate works. - Fix regression in qib caused by over-aggressive PCIe tuning. - Other small fixes for hardware drivers (ipath, nes, qib). * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/nes: Copyright update IB/mlx4: pass SMP vendor-specific attribute MADs to firmware RDMA/nes: Fix fast memory registration opcode RDMA/nes: Fix fast memory registration length RDMA/ucma: Discard all events for new connections until accepted IB/qib: Roll back PCIe tuning change IB/qib: Use GFP_ATOMIC when locks are held RDMA/nes: Add missing rcu_read_unlock() in nes_addr_resolve_neigh() RDMA/nes: Fix for sending MPA reject frame IB/ipath: Calling PTR_ERR() on right variable in create_file() RDMA/core: Fix kernel panic by always initializing qp->usecnt
2012-02-01proc: make sure mem_open() doesn't pin the target's memoryOleg Nesterov
Once /proc/pid/mem is opened, the memory can't be released until mem_release() even if its owner exits. Change mem_open() to do atomic_inc(mm_count) + mmput(), this only pins mm_struct. Change mem_rw() to do atomic_inc_not_zero(mm_count) before access_remote_vm(), this verifies that this mm is still alive. I am not sure what should mem_rw() return if atomic_inc_not_zero() fails. With this patch it returns zero to match the "mm == NULL" case, may be it should return -EINVAL like it did before e268337d. Perhaps it makes sense to add the additional fatal_signal_pending() check into the main loop, to ensure we do not hold this memory if the target task was oom-killed. Cc: stable@kernel.org Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-01proc: unify mem_read() and mem_write()Oleg Nesterov
No functional changes, cleanup and preparation. mem_read() and mem_write() are very similar. Move this code into the new common helper, mem_rw(), which takes the additional "int write" argument. Cc: stable@kernel.org Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-01proc: mem_release() should check mm != NULLOleg Nesterov
mem_release() can hit mm == NULL, add the necessary check. Cc: stable@kernel.org Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-01PM / Hibernate: Thaw kernel threads in SNAPSHOT_CREATE_IMAGE ioctl pathSrivatsa S. Bhat
In the SNAPSHOT_CREATE_IMAGE ioctl, if the call to hibernation_snapshot() fails, the frozen tasks are not thawed. And in the case of success, if we happen to exit due to a successful freezer test, all tasks (including those of userspace) are thawed, whereas actually we should have thawed only the kernel threads at that point. Fix both these issues. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: stable@vger.kernel.org
2012-02-01MAINTAINERS: Greg's suse email address is deadGreg KH
My email address has changed, the suse.de one is now dead, so update all of my MAINTAINER entries with the correct one so that patches don't get lost. Also change the status of some of my entries as I'm supposed to be doing this stuff now for real. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-01mtd: fix merge conflict resolution breakageArtem Bityutskiy
This patch fixes merge conflict resolution breakage introduced by merge d3712b9dfcf4 ("Merge tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream"). The commit changed 'mtd_can_have_bb()' function and made it always return zero, which is incorrect. Instead, we need it to return whether the underlying flash device can have bad eraseblocks or not. UBI needs this information because it affects how it handles the underlying flash. E.g., if the underlying flash is NOR, it cannot have bad blocks and any write or erase error is fatal, and all we can do is to switch to R/O mode. We do not need to reserve a pool of good eraseblocks for bad eraseblocks handling, and so on. This patch also removes 'mtd_can_have_bb()' invocations from Logfs to ensure correct Logfs behavior. I've tested that with this patch UBI works on top of NOR and NAND flashes emulated by mtdram and nandsim correspondingly. This patch is based on patch from Linus Torvalds. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Jörn Engel <joern@logfs.org> Acked-by: Prasad Joshi <prasadjoshi.linux@gmail.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-01Input: serio_raw - return proper result when serio_raw_read failsChe-Liang Chiou
serio_raw_read now returns (sometimes partially) successful number of bytes transferred to the caller, and only returns error code to the caller on completely failed transfers. Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-02-01Input: document device propertiesHenrik Rydberg
Add a section which defines the input device properties and provides guidelines on how to use them. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Reviewed-by: Chase Douglas <chase.douglas@canonical.com> Reviewed-by: Jussi Pakkanen <jussi.pakkanen@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-02-01Input: twl4030_keypad - fix comment (trivial)Felipe Contreras
And trivial whitespace fixes. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-02-01Input: gpio_keys - fix struct device declared inside parameter listHeiko Stübner
A struct device parameter is used in the enable and disable callbacks to distinguish between different gpio_keys devices. Platforms that don't use these callbacks may not include struct device at all, as seen on arch/arm/mach-s3c2410/mach-n30.c Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-02-01Input: evdev - fix variable initialisationHeiko Stübner
Commit 509f87c5f564 (evdev - do not block waiting for an event if fd is nonblock) created a code path were it was possible to use retval uninitialized. This could lead to the xorg evdev input driver getting corrupt data and refusing to work with log messages like AUO-Pixcir touchscreen: Read error: Success sg060_keys: Read error: Success AUO-Pixcir touchscreen: Read error: Success sg060_keys: Read error: Success (for drivers auo-pixcir-ts and gpio-keys). Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Dima Zavin <dima@android.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-02-01ARM: mach-shmobile: both USB DMAC instances on sh7372 are slave-onlyGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-01dma: sh_dma: not all SH DMAC implementations support MEMCPYGuennadi Liakhovetski
Add a flag to allow platforms to specify, whether a DMAC instance supports the MEMCPY operation. To avoid regressions, preserve the current default. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-01drm/radeon/kms: Fix device tree linkage of DP i2c buses tooJean Delvare
Properly set the parent device of DP i2c buses before registering them too. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-01drm/radeon: Set DESKTOP_HEIGHT register to the framebuffer (not mode) height.Michel Dänzer
The value of this register is transferred to the V_COUNTER register at the beginning of vertical blank. V_COUNTER is the reference for VLINE waits and goes from VIEWPORT_Y_START to VIEWPORT_Y_START+VIEWPORT_HEIGHT during scanout, so if VIEWPORT_Y_START is not 0, V_COUNTER actually went backwards at the beginning of vertical blank, and VLINE waits excluding the whole scanout area could never finish (possibly only if VIEWPORT_Y_START is larger than the length of vertical blank in scanlines). Setting DESKTOP_HEIGHT to the framebuffer height should prevent this for any kind of VLINE wait. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=45329 . CC: stable@vger.kernel.org Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-01drm/radeon/kms: disable output polling when suspendedSeth Forshee
Polling the outputs when the device is suspended can result in erroneous status updates. Disable output polling during suspend to prevent this from happening. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-02lib/digsig: checks for NULL return valueDmitry Kasatkin
mpi_read_from_buffer() return value must not be NULL. Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: James Morris <jmorris@namei.org>
2012-02-02lib/mpi: added missing NULL checkDmitry Kasatkin
Added missing NULL check after mpi_alloc_limb_space(). Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: James Morris <jmorris@namei.org>
2012-02-02lib/mpi: added comment on divide by 0 caseDmitry Kasatkin
Comment explains that existing clients do not call this function with dsize == 0, which means that 1/0 should not happen. Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: James Morris <jmorris@namei.org>
2012-02-02lib/mpi: check for possible zero lengthDmitry Kasatkin
Buggy client might pass zero nlimbs which is meaningless. Added check for zero length. Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: James Morris <jmorris@namei.org>
2012-02-02lib/digsig: pkcs_1_v1_5_decode_emsa cleanupDmitry Kasatkin
Removed useless 'is_valid' variable in pkcs_1_v1_5_decode_emsa(), which was inhereted from original code. Client now uses return value to check for an error. Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: James Morris <jmorris@namei.org>
2012-02-02lib/digsig: additional sanity checks against badly formated key payloadDmitry Kasatkin
Added sanity checks for possible wrongly formatted key payload data: - minimum key payload size - zero modulus length - corrected upper key payload boundary. Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: James Morris <jmorris@namei.org>
2012-02-02lib/mpi: removed unused functionsDmitry Kasatkin
do_encode_md() and mpi_get_keyid() are not parts of mpi library. They were used early versions of gnupg and in digsig project, but they are not used neither here nor there anymore. Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: James Morris <jmorris@namei.org>
2012-02-02lib/mpi: checks for zero divisor lengthDmitry Kasatkin
Divisor length should not be 0. Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: James Morris <jmorris@namei.org>
2012-02-02lib/mpi: return error code on dividing by zeroDmitry Kasatkin
Definitely better to return error code than to divide by zero. Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: James Morris <jmorris@namei.org>
2012-02-02lib/mpi: replaced MPI_NULL with normal NULLDmitry Kasatkin
MPI_NULL is replaced with normal NULL. Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: James Morris <jmorris@namei.org>
2012-02-02lib/mpi: added missing NULL checkDmitry Kasatkin
Added missing NULL check after mpi_alloc(). Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: James Morris <jmorris@namei.org>
2012-02-01ALSA: HDA: Fix duplicated output to more than one codecDavid Henningsson
This typo caused the wrong codec's nid to be checked for wcaps type. As a result, sometimes speakers would duplicate the output sent to HDMI output. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/924320 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-01Merge branch 'drm-nouveau-fixes' of ↵Dave Airlie
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes * 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nv50/pm: signedness bug in nv50_pm_clocks_pre() drm/nouveau/gem: fix fence_sync race / oops drm/nouveau: fix typo on mxmdcb option drm/nouveau/mxm: pretend to succeed, even if we can't shadow the MXM-SIS drm/nouveau/disp: check that panel power gpio is enabled at init time
2012-02-01ALSA: hda - Fix calling cs_automic twice for Cirrus codecs.Dylan Reid
If cs_automic is called twice (like it is during init) while the mic is present, it will over-write the last_input with the new one, causing it to switch back to the automic input when the mic is unplugged. This leaves the driver in a state (cur_input, last_input, and automix_idx the same) where the internal mic can not be selected until it is rebooted without the mic attached. Check that the mic hasn't already been switched to before setting last_input. Signed-off-by: Dylan Reid <dgreid@chromium.org> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-01drm/nv50/pm: signedness bug in nv50_pm_clocks_pre()Dan Carpenter
calc_mclk() returns zero on success and negative on failure but clk is a u32. v2: Martin Peres: - clk should be an int, not a u32 Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-02-01drm/nouveau/gem: fix fence_sync race / oopsBen Skeggs
Due to a race it was possible for a fence to be destroyed while another thread was trying to synchronise with it. If this happened in the fallback non-semaphore path, it lead to the following oops due to fence->channel being NULL. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<fa9632ce>] nouveau_fence_update+0xe/0xe0 [nouveau] *pde = a649c067 SMP Modules linked in: fuse nouveau(O) ttm(O) drm_kms_helper(O) drm(O) mxm_wmi video wmi netconsole configfs lockd bnep bluetooth rfkill ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ip6table_filter ip6_tables snd_hda_codec_realtek snd_hda_intel snd_hda_cobinfmt_misc uinput ata_generic pata_acpi pata_aet2c_algo_bit i2c_core [last unloaded: wmi] Pid: 2255, comm: gnome-shell Tainted: G O 3.2.0-0.rc5.git0.1.fc17.i686 #1 System manufacturer System Product Name/M2A-VM EIP: 0060:[<fa9632ce>] EFLAGS: 00010296 CPU: 1 EIP is at nouveau_fence_update+0xe/0xe0 [nouveau] EAX: 00000000 EBX: ddfc6dd0 ECX: dd111580 EDX: 00000000 ESI: 00003e80 EDI: dd111580 EBP: dd121d00 ESP: dd121ce8 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process gnome-shell (pid: 2255, ti=dd120000 task=dd111580 task.ti=dd120000) Stack: 7dc86c76 00000000 00003e80 ddfc6dd0 00003e80 dd111580 dd121d0c fa96371f 00000000 dd121d3c fa963773 dd111580 01000246 000ec53d 00000000 ddfc6dd0 00001f40 00000000 ddfc6dd0 00000010 dc7df840 dd121d6c fa9639a0 00000000 Call Trace: [<fa96371f>] __nouveau_fence_signalled+0x1f/0x30 [nouveau] [<fa963773>] __nouveau_fence_wait+0x43/0xd0 [nouveau] [<fa9639a0>] nouveau_fence_sync+0x1a0/0x1c0 [nouveau] [<fa964046>] validate_list+0x176/0x300 [nouveau] [<f7d9c9c0>] ? ttm_bo_mem_put+0x30/0x30 [ttm] [<fa964b8a>] nouveau_gem_ioctl_pushbuf+0x48a/0xfd0 [nouveau] [<c0406481>] ? die+0x31/0x80 [<f7c93d98>] drm_ioctl+0x388/0x490 [drm] [<c0406481>] ? die+0x31/0x80 [<fa964700>] ? nouveau_gem_ioctl_new+0x150/0x150 [nouveau] [<c0635c7b>] ? file_has_perm+0xcb/0xe0 [<f7c93a10>] ? drm_copy_field+0x80/0x80 [drm] [<c0564f56>] do_vfs_ioctl+0x86/0x5b0 [<c0406481>] ? die+0x31/0x80 [<c0635f22>] ? selinux_file_ioctl+0x62/0x130 [<c0554f30>] ? fget_light+0x30/0x340 [<c05654ef>] sys_ioctl+0x6f/0x80 [<c099e3a4>] syscall_call+0x7/0xb [<c0406481>] ? die+0x31/0x80 [<c0406481>] ? die+0x31/0x80 Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2012-02-01drm/nouveau: fix typo on mxmdcb optionBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
generated by cgit (git 2.34.1) at 2025-07-15 20:42:49 +0000