summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-03-08Input: ad7879 - fix default x/y axis assignmentStefan Agner
The X/Y position measurements read from the controller are interpreted wrong. The first measurement X+ contains the Y position, and the second measurement Y+ the X position (see also Table 11 Register Table in the data sheet). The problem is already known and a swap option has been introduced: commit 6680884a4420 ("Input: ad7879 - add option to correct xy axis") However, the meaning of the new boolean is inverted since the underlying values are already swapped. Let ts->swap_xy set to true actually be the swapped configuration of the two axis. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-08Input: ad7879 - move header to platform_data directoryStefan Agner
The header file is used by the SPI and I2C variant of the driver. Therefore, move it to a more generic place under platform_data. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-04Input: ts4800 - add hardware dependencyJean Delvare
The Technologic Systems TS-4800 is an i.MX515 board, so its drivers are useless unless building a SOC_IMX51 kernel, except for build testing purposes. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-04Merge branch 'rotary-encoder' into nextDmitry Torokhov
Bring in updates to roraty encoder driver switching it away from legacy platform data and over to generic device properties and adding support for encoders using more than 2 GPIOs.
2016-03-04Input: cyapa - fix for losing events during device power transitionsDudley Du
When changing the scan rate as part of runtime-resume process we may lose some of the events, because: 1) for gen3 trackpads, the driver must msleep() some time to ensure that the device is ready to accept next command; 2) for gen5 and later trackpads, the queue dumping function will simply ignore the events when waiting for the set power mode command response. The solution is to keep polling and report those valid events when the set power mode command is in progress. Signed-off-by: Dudley Du <dudl@cypress.com> Tested-by: Jeremiah Mahler <jmmahler@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-04Input: sh_keysc - remove dependency on SUPERHSimon Horman
A dependency on ARCH_SHMOBILE seems to be the best option for sh_keysc: * For Super H based SoCs: sh_keysc is used on SH_MIGOR, SH_ECOVEC, SH_KFR2R09, SH_7722_SOLUTION_ENGINE, and SH_7724_SOLUTION_ENGINE, which depend on either CPU_SUBTYPE_SH7722 or CPU_SUBTYPE_SH7724, and both select ARCH_SHMOBILE. * For ARM Based SoCs: Since the removal of legacy (non-multiplatform) support this driver has not been used by any Renesas ARM based SoCs. The Renesas ARM based SoCs currently select ARCH_SHMOBILE, however, it is planned that this will no longer be the case. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-04Input: melfas_mip4 - add resolution reportingSangwon Jee
Add support for retrieving device resolution (pixels per mm) from firmware and using it when setting up input device. Signed-off-by: Sangwon Jee <jeesw@melfas.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: rotary-encoder - support more than 2 gpios as inputUwe Kleine-König
This changes how the used gpios are stored (i.e. a struct gpio_descs instead of two struct gpio_desc) and as with >2 gpios the states are numbered differently the function rotary_encoder_get_state returns unencoded numbers instead of grey encoded numbers before. The latter has some implications on how the returned value is used and so the change is bigger than one might expect at first. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: rotary_encoder - move away from platform data structureDmitry Torokhov
Drop support for platform data passed via a C-structure and switch to device properties instead, which should make the driver compatible with all platforms: OF, ACPI and static boards. Static boards should use property sets to communicate device parameters to the driver. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: stmpe-ts - restore kerneldocLinus Walleij
commit e4b88e19897f1039fd83f1630517becafc0dd163 "Input: stmpe-ts - enforce device tree only mode" removed platform data but accidentally stripped away useful kerneldoc, so reintroduce it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: snvs_pwrkey - use __maybe_unused to hide pm functionsArnd Bergmann
The SNVS power key driver has suspend/resume functions that are accessed using SIMPLE_DEV_PM_OPS, which hide the reference when CONFIG_PM_SLEEP is not set, resulting in a warning about unused functions: drivers/input/keyboard/snvs_pwrkey.c:183:12: error: 'imx_snvs_pwrkey_suspend' defined but not used [-Werror=unused-function] drivers/input/keyboard/snvs_pwrkey.c:194:12: error: 'imx_snvs_pwrkey_resume' defined but not used [-Werror=unused-function] This adds __maybe_unused annotations to let the compiler know it can silently drop the function definition. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: spear-keyboard - use __maybe_unused to hide pm functionsArnd Bergmann
The spear keyboard driver uses #ifdef CONFIG_PM to hide its power management functions, but then uses references from SIMPLE_DEV_PM_OPS that are only present if both CONFIG_PM and CONFIG_PM_SLEEP are set, resulting in a warning about unused functions: drivers/input/keyboard/spear-keyboard.c:292:12: error: 'spear_kbd_suspend' defined but not used [-Werror=unused-function] drivers/input/keyboard/spear-keyboard.c:345:12: error: 'spear_kbd_resume' defined but not used [-Werror=unused-function] This removes the #ifdef and instead uses a __maybe_unused annotation. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: goldfish_events - enable ACPI-based enumeration for goldfish eventsJason Hu
Add ACPI binding to the goldfish events driver. Signed-off-by: Jason Hu <jia-cheng.hu@intel.com> Signed-off-by: Jin Qian <jinqian@android.com> Signed-off-by: Alan <alan@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: goldfish_events - add devicetree bindingsGreg Hackmann
Add device tree bindings to the Goldfish virtual platform event driver. Signed-off-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: Jin Qian <jinqian@android.com> Signed-off-by: Alan <alan@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: rotary_encoder - use input_set_capability()Dmitry Torokhov
Instead of manipulating capability bits directly let's use appropriate helpers. Also there is no need to explicitly set EV_ABS when calling input_set_abs_params(). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: rotary_encoder - convert to use gpiod APIDmitry Torokhov
Instead of using old GPIO API, let's switch to GPIOD API, which automatically handles polarity. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: rotary_encoder - mark PM methods as __maybe_unusedDmitry Torokhov
Instead of guarding PM methods with #ifdef let's mark them as __maybe_unused as it allows for better compile coverage. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: rotary_encoder - use threaded irqsTimo Teräs
Convert to use threaded IRQs to support GPIOs that can sleep. Protect the irq handler with mutex as it can be triggered from two different irq lines accessing the same state. This allows using GPIO expanders behind I2C or SPI bus. Signed-off-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-02-17Input: add MELFAS MIP4 Touchscreen driverSangwon Jee
This is an input driver for MELFAS MIP4 Touchscreen devices, such as MMS400, MMS500, MCS8000, MIT200, MIT300, MIT400, MFS10. All devices implementing MIP4 protocol (MELFAS Interface Protocol Version 4) should be supported by this driver. Signed-off-by: Sangwon Jee <jeesw@melfas.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-02-09Input: Allow compile test of Goodix and Colibri VF50 if !GPIOLIBGeert Uytterhoeven
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. If COMPILE_TEST is enabled, relax the dependency on GPIOLIB for the recently introduced or relaxed symbols TOUCHSCREEN_GOODIX and TOUCHSCREEN_COLIBRI_VF50. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-27Input: byd - add BYD PS/2 touchpad driverChris Diamand
Driver for the BYD BTP10463 touchpad, found in PC Specialist `Lafite' laptops. This patch sends the magic command sequence which causes the touchpad to stream intellimouse-style packets. Gestures are detected inside the touchpad, and exposed as special values in the Z component of each packet - absolute coordinates are not supported, even in the Windows driver. At present, this supports two-finger vertical and horizontal scrolling, and provides the framework to expose the other gestures it can recognize. Signed-off-by: Chris Diamand <chris@diamand.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-27Input: cyttsp - perform hard reset of the chip during probeOreste Salerno
Since we removed support for calling an init() callback from the platform data, introduce a function which initializes the chip by performing a hard reset, using the reset gpio defined in the device properties. Signed-off-by: Oreste Salerno <oreste.salerno@tomtom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-27Input: cyttsp - switch to using device propertiesOreste Salerno
Drop support for platform data passed via a C-structure and switch to device properties instead, which should make the driver compatible with all platforms: OF, ACPI and static boards. Static boards should use property sets to communicate device parameters to the driver. Signed-off-by: Oreste Salerno <oreste.salerno@tomtom.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-27Input: cyttsp - check return value of input_mt_init_slotsOreste Salerno
Signed-off-by: Oreste Salerno <oreste.salerno@tomtom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-27Input: cyttsp - use devres managed resource allocationsOreste Salerno
Use devm_() functions for allocating memory, input device and IRQ. Signed-off-by: Oreste Salerno <oreste.salerno@tomtom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-18Input: rotary_encoder - convert to devm-* apiTimo Teräs
Use managed resource API for simplifying error paths. Signed-off-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-13Input: gpio-keys - allow disabling individual buttons in DTLaxman Dewangan
Add support to disable buttons from DT via status property if given button is not supported on given platforms. This will help re-using existing dtsi files across multiple platforms. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-13Input: gpio-keys - allow setting input device name in DTLaxman Dewangan
Allow specifying name if input device via device tree property. This helps userspace code to get name and perform proper event to key mapping in some cases (for example, on Android). Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-12Merge branch 'xpad' into nextDmitry Torokhov
Bring in update to xpad driver improves support of Xbox One and wireless controllers and fixes handling of concurrent requests to force feedback and LEDs.
2016-01-12Input: xpad - correct xbox one pad device namePavel Rojtberg
Apparently the Covert Forces ID is not Covert Forces pad exclusive, but rather denotes a new firmware version that can be found on all new controllers and can be also updated on old hardware using Windows 10. see: https://github.com/paroj/xpad/issues/19 Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-11Input: atmel_mxt_ts - improve touchscreen size/orientation handlingNick Dyer
Both T100 and T9 handle range and orientation in a similar fashion. Reduce duplication between the two implementations. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-11Input: elantech - mark protocols v2 and v3 as semi-mtBenjamin Tissoires
When using a protocol v2 or v3 hardware, elantech uses the function elantech_report_semi_mt_data() to report data. This devices are rather creepy because if num_finger is 3, (x2,y2) is (0,0). Yes, only one valid touch is reported. Anyway, userspace (libinput) is now confused by these (0,0) touches, and detect them as palm, and rejects them. Commit 3c0213d17a09 ("Input: elantech - fix semi-mt protocol for v3 HW") was sufficient enough for xf86-input-synaptics and libinput before it has palm rejection. Now we need to actually tell libinput that this device is a semi-mt one and it should not rely on the actual values of the 2 touches. Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-11Input: wacom_w8001 - drop use of ABS_MT_TOOL_TYPEPeter Hutterer
As of e0361b70175 ("Input: wacom_w8001 - split the touch and pen devices into two devices") the touch events aren't multiplexed over the same device anymore, the use of ABS_MT_TOOL_TYPE is superfluous. And even before then it only ever sent MT_TOOL_TYPE_FINGER anyway. Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-10Linux 4.4v4.4Linus Torvalds
2016-01-10Input: gpio-keys - fix check for disabling unsupported keysDmitry Torokhov
Commit 4ea14a53d8f881034fa9e186653821c4e3d9a8fb ("Input: gpio-keys - report error when disabling unsupported key") tried let user know that they attempted to disable an unsupported key, unfortunately the check is wrong as it believes that all codes are invalid. Fix it by ensuring that keys that we try to disable are subset of keys (or switches) that device reports. Fixes: 4ea14a53d8f8 ("Input: gpio-keys - report error when disabling unsupported key") Reported-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Tested-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-09Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "A single fix for machines with pages > 4k (PPC mostly). There's a bug in our optimal transfer size code where we don't account for pages > 4k and can set the transfer size to be less than the page size causing nasty failures" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: sd: Reject optimal transfer length smaller than page size
2016-01-09Merge tag 'pci-v4.4-fixes-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixlet from Bjorn Helgaas: "This marks the TI DRA7xx host bridge driver as broken. Apparently it has never worked without some additional out-of-tree code, so I'm going to mark it broken now and remove it completely next cycle unless it's fixed" * tag 'pci-v4.4-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: dra7xx: Mark driver as broken
2016-01-08vmstat: allocate vmstat_wq before it is usedMichal Hocko
kernel test robot has reported the following crash: BUG: unable to handle kernel NULL pointer dereference at 00000100 IP: [<c1074df6>] __queue_work+0x26/0x390 *pdpt = 0000000000000000 *pde = f000ff53f000ff53 *pde = f000ff53f000ff53 Oops: 0000 [#1] PREEMPT PREEMPT SMP SMP CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.4.0-rc4-00139-g373ccbe #1 Workqueue: events vmstat_shepherd task: cb684600 ti: cb7ba000 task.ti: cb7ba000 EIP: 0060:[<c1074df6>] EFLAGS: 00010046 CPU: 0 EIP is at __queue_work+0x26/0x390 EAX: 00000046 EBX: cbb37800 ECX: cbb37800 EDX: 00000000 ESI: 00000000 EDI: 00000000 EBP: cb7bbe68 ESP: cb7bbe38 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 CR0: 8005003b CR2: 00000100 CR3: 01fd5000 CR4: 000006b0 Stack: Call Trace: __queue_delayed_work+0xa1/0x160 queue_delayed_work_on+0x36/0x60 vmstat_shepherd+0xad/0xf0 process_one_work+0x1aa/0x4c0 worker_thread+0x41/0x440 kthread+0xb0/0xd0 ret_from_kernel_thread+0x21/0x40 The reason is that start_shepherd_timer schedules the shepherd work item which uses vmstat_wq (vmstat_shepherd) before setup_vmstat allocates that workqueue so if the further initialization takes more than HZ we might end up scheduling on a NULL vmstat_wq. This is really unlikely but not impossible. Fixes: 373ccbe59270 ("mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress") Reported-by: kernel test robot <ying.huang@linux.intel.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-08Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "This is the final small set of ARM SoC bug fixes for linux-4.4, almost all regressions: OMAP: - data corruption on the Nokia N900 flash Allwinner: - Two defconfig change to get USB working again ARM Versatile: - Interrupt numbers gone bad after an older bug fix Nomadik: - Crashes from incorrect L2 cache settings VIA vt8500: - SD/MMC support on WM8650 never worked" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: dts: vt8500: Add SDHC node to DTS file for WM8650 ARM: Fix broken USB support in multi_v7_defconfig for sunxi devices ARM: versatile: fix MMC/SD interrupt assignment ARM: nomadik: set latencies to 8 cycles ARM: OMAP2+: Fix onenand rate detection to avoid filesystem corruption ARM: Fix broken USB support in sunxi_defconfig
2016-01-08Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fix from Paolo Bonzini: "A simple fix. I'm sending it before the merge window, because it refines a patch found in your master branch but not yet in the kvm/next branch that is destined for 4.5" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: x86: only channel 0 of the i8254 is linked to the HPET
2016-01-08Merge tag 'pm+acpi-4.4-final' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Just one obvious fix that adds a missing function argument in ACPI code introduced recently (Kees Cook)" * tag 'pm+acpi-4.4-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / property: avoid leaking format string into kobject name
2016-01-08Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "A handful of x86 fixes: - a syscall ABI fix, fixing an Android breakage - a Xen PV guest fix relating to the RTC device, causing a non-working console - a Xen guest syscall stack frame fix - an MCE hotplug CPU crash fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/numachip: Fix NumaConnect2 MMCFG PCI access x86/entry: Restore traditional SYSENTER calling convention x86/entry: Fix some comments x86/paravirt: Prevent rtc_cmos platform device init on PV guests x86/xen: Avoid fast syscall path for Xen PV guests x86/mce: Ensure offline CPUs don't participate in rendezvous process
2016-01-08Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Misc scheduler fixes" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Reset task's lockless wake-queues on fork() sched/core: Fix unserialized r-m-w scribbling stuff sched/core: Check tgid in is_global_init() sched/fair: Fix multiplication overflow on 32-bit systems
2016-01-08Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Two core subsystem fixes, plus a handful of tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix race in swevent hash perf: Fix race in perf_event_exec() perf list: Robustify event printing routine perf list: Add support for PERF_COUNT_SW_BPF_OUT perf hists browser: Fix segfault if use symbol filter in cmdline perf hists browser: Reset selection when refresh perf hists browser: Add NULL pointer check to prevent crash perf buildid-list: Fix return value of perf buildid-list -k perf buildid-list: Show running kernel build id fix
2016-01-08Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Ingo Molnar: "Fixes a core IRQ subsystem deadlock" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Prevent chip buslock deadlock
2016-01-08Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block revert from Jens Axboe: "The previous pull request had a split fix for NVMe, however there are corner cases where that ends up blowing up. So let's revert it for 4.4. The regression isn't introduced in this cycle, and it's "just" a performance regression, not a stability/integrity issue" * 'for-linus' of git://git.kernel.dk/linux-block: Revert "block: Split bios on chunk boundaries"
2016-01-08Merge tag 'dmaengine-fix-4.4' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine fixes from Vinod Koul: "Late fixes for 4.4 are three fixes for drivers which include a revert of mic-x100 fix which is causing regression, xgene fix for double IRQ and async_tx fix to use GFP_NOWAIT" * tag 'dmaengine-fix-4.4' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: xgene-dma: Fix double IRQ issue by setting IRQ_DISABLE_UNLAZY flag async_tx: use GFP_NOWAIT rather than GFP_IO dmaengine: Revert "dmaengine: mic_x100: add missing spin_unlock"
2016-01-08Merge branch 'dmi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull dmi fix from Jean Delvare. * 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: firmware: dmi_scan: Fix UUID endianness for SMBIOS >= 2.6
2016-01-08Merge tag 'sound-4.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A slightly higher volume than a new year's wish, but not too worrisome: a large LOC is only for HD-audio device-specific quirks, so fairly safe to apply. The rest ASoC fixes are all trivial and small; a simple replacement of mutex call with nested lock version, a few Arizona and Realtek codec fixes, and a regression fix for Skylake firmware handling" * tag 'sound-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: Intel: Skylake: Fix the memory leak ASoC: Intel: Skylake: Revert previous broken fix memory leak fix ASoC: Use nested lock for snd_soc_dapm_mutex_lock ASoC: rt5645: add sys clk detection ALSA: hda - Add keycode map for alc input device ALSA: hda - Add mic mute hotkey quirk for Lenovo ThinkCentre AIO ASoC: arizona: Fix bclk for sample rates that are multiple of 4kHz
2016-01-08Merge tag 'omap-for-v4.4/onenand-corruption' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Pull "urgent onenand file system corruption fix for n900" from Tony Lindgren: Last minute urgent pull request to prevent file system corruption on Nokia N900. Looks like we have a GPMC bus timing bug that has gone unnoticed because of bootloader configured registers until few days ago. We are not detecting the onenand clock rate properly unless we have CONFIG_OMAP_GPMC_DEBUG set and this causes onenand corruption that can be easily be reproduced. There seems to be also an additional bug still lurking around for onenand corruption. But that is still being investigated and it does not seem to be GPMC timings related. Meanwhile, it would be good to get this fix into v4.4 to prevent wrong timings from corrupting onenand. * tag 'omap-for-v4.4/onenand-corruption' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix onenand rate detection to avoid filesystem corruption
generated by cgit (git 2.34.1) at 2025-07-15 02:11:49 +0000