| Age | Commit message (Collapse) | Author |
|---|
|
Commit 9748dbc9f265 ("net/smc: Avoid -Wflex-array-member-not-at-end
warnings") introduced tagged `struct smc_clc_v2_extension_fixed` and
`struct smc_clc_smcd_v2_extension_fixed`. We want to ensure that when
new members need to be added to the flexible structures, they are
always included within these tagged structs.
So, we use `static_assert()` to ensure that the memory layout for
both the flexible structure and the tagged struct is the same after
any changes.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jan Karcher <jaka@linux.ibm.com>
Link: https://patch.msgid.link/ZrVBuiqFHAORpFxE@cute
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit d88cabfd9abc ("nfp: Avoid -Wflex-array-member-not-at-end
warnings") introduced tagged `struct nfp_dump_tl_hdr`. We want
to ensure that when new members need to be added to the flexible
structure, they are always included within this tagged struct.
So, we use `static_assert()` to ensure that the memory layout for
both the flexible structure and the tagged struct is the same after
any changes.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/ZrVB43Hen0H5WQFP@cute
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In macb_suspend(), idev->ifa_list is fetched with rcu_access_pointer()
and later the pointer is dereferenced as ifa->ifa_local.
So, idev->ifa_list must be fetched with rcu_dereference().
Fixes: 0cb8de39a776 ("net: macb: Add ARP support to WOL")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240808040021.6971-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A selftest is added such that without the previous patch,
a crash can happen. With the previous patch, the test can
run successfully. The new test is written in a way which
mimics original crash case:
main_prog
static_prog_1
static_prog_2
where static_prog_1 has different paths to static_prog_2
and some path has stack allocated and some other path
does not. A stacksafe() checking in static_prog_2()
triggered the crash.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240812214852.214037-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Daniel Hodges reported a kernel verifier crash when playing with sched-ext.
Further investigation shows that the crash is due to invalid memory access
in stacksafe(). More specifically, it is the following code:
if (exact != NOT_EXACT &&
old->stack[spi].slot_type[i % BPF_REG_SIZE] !=
cur->stack[spi].slot_type[i % BPF_REG_SIZE])
return false;
The 'i' iterates old->allocated_stack.
If cur->allocated_stack < old->allocated_stack the out-of-bound
access will happen.
To fix the issue add 'i >= cur->allocated_stack' check such that if
the condition is true, stacksafe() should fail. Otherwise,
cur->stack[spi].slot_type[i % BPF_REG_SIZE] memory access is legal.
Fixes: 2793a8b015f7 ("bpf: exact states comparison for iterator convergence checks")
Cc: Eduard Zingerman <eddyz87@gmail.com>
Reported-by: Daniel Hodges <hodgesd@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240812214847.213612-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Remove unnecessary flex-array member `pad[]` and refactor the related
code a bit.
Fix the following warning:
net/sched/act_ct.c:57:29: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/ZrY0JMVsImbDbx6r@cute
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit fc4444941140 ("scsi: mpi3mr: HDB allocation and posting for hardware
and firmware buffers") added mpi3mr_alloc_diag_bufs() which calls
dma_alloc_coherent() to allocate the trace buffer and the firmware
buffer. mpi3mr_alloc_diag_bufs() decides the buffer sizes from the driver
configuration. In my environment, the sizes are 8MB. With the sizes,
dma_alloc_coherent() fails and report this WARNING:
WARNING: CPU: 4 PID: 438 at mm/page_alloc.c:4676 __alloc_pages_noprof+0x52f/0x640
The WARNING indicates that the order of the allocation size is larger than
MAX_PAGE_ORDER. After this failure, mpi3mr_alloc_diag_bufs() reduces the
buffer sizes and retries dma_alloc_coherent(). In the end, the buffer
allocations succeed with 4MB size in my environment, which corresponds to
MAX_PAGE_ORDER=10. Though the allocations succeed, the WARNING message is
misleading and should be avoided.
To avoid the WARNING, check the orders of the buffer allocation sizes
before calling dma_alloc_coherent(). If the orders are larger than
MAX_PAGE_ORDER, fall back to the retry path.
Fixes: fc4444941140 ("scsi: mpi3mr: HDB allocation and posting for hardware and firmware buffers")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20240810042701.661841-3-shinichiro.kawasaki@wdc.com
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Petr Machata says:
====================
net: nexthop: Increase weight to u16
In CLOS networks, as link failures occur at various points in the network,
ECMP weights of the involved nodes are adjusted to compensate. With high
fan-out of the involved nodes, and overall high number of nodes,
a (non-)ECMP weight ratio that we would like to configure does not fit into
8 bits. Instead of, say, 255:254, we might like to configure something like
1000:999. For these deployments, the 8-bit weight may not be enough.
To that end, in this patchset increase the next hop weight from u8 to u16.
Patch #1 adds a flag that indicates whether the reserved fields are zeroed.
This is a follow-up to a new fix merged in commit 6d745cd0e972 ("net:
nexthop: Initialize all fields in dumped nexthops"). The theory behind this
patch is that there is a strict ordering between the fields actually being
zeroed, the kernel declaring that they are, and the kernel repurposing the
fields. Thus clients can use the flag to tell if it is safe to interpret
the reserved fields in any way.
Patch #2 contains the substantial code and the commit message covers the
details of the changes.
Patches #3 to #6 add selftests.
====================
Link: https://patch.msgid.link/cover.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests that attempt to create NH groups that use full 16 bits of NH
weight.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/101cdd3f2bfd9511c9bec95f909d20ff56f70ba5.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests that exercise full 16 bits of NH weight.
Like in the previous patch, omit the 255:65535 test when KSFT_MACHINE_SLOW.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/a91d6ead9d1b1b4b7e276ca58a71ef814f42b7dd.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests that exercise full 16 bits of NH weight.
To test the 255:65535, it is necessary to run more packets than for the
other tests. On a debug kernel, the test can take up to a minute, therefore
avoid the test when KSFT_MACHINE_SLOW.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/c0c257c00ad30b07afc3fa5e2afd135925405544.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the context of an offloaded datapath, it may take a while for the ip
link stats to be updated. This causes the test to fail when MZ_DELAY is too
low. Sleep after the packets are sent for the link stats to get up to date.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/8b1971d948273afd7de2da3d6a2ba35200540e55.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In CLOS networks, as link failures occur at various points in the network,
ECMP weights of the involved nodes are adjusted to compensate. With high
fan-out of the involved nodes, and overall high number of nodes,
a (non-)ECMP weight ratio that we would like to configure does not fit into
8 bits. Instead of, say, 255:254, we might like to configure something like
1000:999. For these deployments, the 8-bit weight may not be enough.
To that end, in this patch increase the next hop weight from u8 to u16.
Increasing the width of an integral type can be tricky, because while the
code still compiles, the types may not check out anymore, and numerical
errors come up. To prevent this, the conversion was done in two steps.
First the type was changed from u8 to a single-member structure, which
invalidated all uses of the field. This allowed going through them one by
one and audit for type correctness. Then the structure was replaced with a
vanilla u16 again. This should ensure that no place was missed.
The UAPI for configuring nexthop group members is that an attribute
NHA_GROUP carries an array of struct nexthop_grp entries:
struct nexthop_grp {
__u32 id; /* nexthop id - must exist */
__u8 weight; /* weight of this nexthop */
__u8 resvd1;
__u16 resvd2;
};
The field resvd1 is currently validated and required to be zero. We can
lift this requirement and carry high-order bits of the weight in the
reserved field:
struct nexthop_grp {
__u32 id; /* nexthop id - must exist */
__u8 weight; /* weight of this nexthop */
__u8 weight_high;
__u16 resvd2;
};
Keeping the fields split this way was chosen in case an existing userspace
makes assumptions about the width of the weight field, and to sidestep any
endianness issues.
The weight field is currently encoded as the weight value minus one,
because weight of 0 is invalid. This same trick is impossible for the new
weight_high field, because zero must mean actual zero. With this in place:
- Old userspace is guaranteed to carry weight_high of 0, therefore
configuring 8-bit weights as appropriate. When dumping nexthops with
16-bit weight, it would only show the lower 8 bits. But configuring such
nexthops implies existence of userspace aware of the extension in the
first place.
- New userspace talking to an old kernel will work as long as it only
attempts to configure 8-bit weights, where the high-order bits are zero.
Old kernel will bounce attempts at configuring >8-bit weights.
Renaming reserved fields as they are allocated for some purpose is commonly
done in Linux. Whoever touches a reserved field is doing so at their own
risk. nexthop_grp::resvd1 in particular is currently used by at least
strace, however they carry an own copy of UAPI headers, and the conversion
should be trivial. A helper is provided for decoding the weight out of the
two fields. Forcing a conversion seems preferable to bending backwards and
introducing anonymous unions or whatever.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/483e2fcf4beb0d9135d62e7d27b46fa2685479d4.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are many unpatched kernel versions out there that do not initialize
the reserved fields of struct nexthop_grp. The issue with that is that if
those fields were to be used for some end (i.e. stop being reserved), old
kernels would still keep sending random data through the field, and a new
userspace could not rely on the value.
In this patch, use the existing NHA_OP_FLAGS, which is currently inbound
only, to carry flags back to the userspace. Add a flag to indicate that the
reserved fields in struct nexthop_grp are zeroed before dumping. This is
reliant on the actual fix from commit 6d745cd0e972 ("net: nexthop:
Initialize all fields in dumped nexthops").
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/21037748d4f9d8ff486151f4c09083bcf12d5df8.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
topology_is_core_online() checks if the core a CPU belongs to
is online. The core is online if at least one of the sibling
CPUs is online. The first CPU of an online core is also online
in the common case, so this should be fairly quick.
Fixes: 73c58e7e1412 ("powerpc: Add HOTPLUG_SMT support")
Signed-off-by: Nysal Jan K.A <nysal@linux.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240731030126.956210-3-nysal@linux.ibm.com
|
|
If a core is offline then enabling SMT should not online CPUs of
this core. By enabling SMT, what is intended is either changing the SMT
value from "off" to "on" or setting the SMT level (threads per core) from a
lower to higher value.
On PowerPC the ppc64_cpu utility can be used, among other things, to
perform the following functions:
ppc64_cpu --cores-on # Get the number of online cores
ppc64_cpu --cores-on=X # Put exactly X cores online
ppc64_cpu --offline-cores=X[,Y,...] # Put specified cores offline
ppc64_cpu --smt={on|off|value} # Enable, disable or change SMT level
If the user has decided to offline certain cores, enabling SMT should
not online CPUs in those cores. This patch fixes the issue and changes
the behaviour as described, by introducing an arch specific function
topology_is_core_online(). It is currently implemented only for PowerPC.
Fixes: 73c58e7e1412 ("powerpc: Add HOTPLUG_SMT support")
Reported-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Closes: https://groups.google.com/g/powerpc-utils-devel/c/wrwVzAAnRlI/m/5KJSoqP4BAAJ
Signed-off-by: Nysal Jan K.A <nysal@linux.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240731030126.956210-2-nysal@linux.ibm.com
|
|
as it doesn't seem to offer anything of value.
There's only 1 trivial user:
int lowpan_ndisc_is_useropt(u8 nd_opt_type) {
return nd_opt_type == ND_OPT_6CO;
}
but there's no harm to always treating that as
a useropt...
Cc: David Ahern <dsahern@kernel.org>
Cc: YOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://patch.msgid.link/20240730003010.156977-1-maze@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jakub Kicinski says:
====================
eth: fbnic: add basic stats
Add basic interface stats to fbnic.
v1: https://lore.kernel.org/20240807022631.1664327-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20240810054322.2766421-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement netdev_stat_ops and export the basic per-queue stats.
This interface expect users to set the values that are used
either to zero or to some other preserved value (they are 0xff by
default). So here we export bytes/packets/drops from tx and rx_stats
plus set some of the values that are exposed by queue stats
to zero.
$ cd tools/testing/selftests/drivers/net && ./stats.py
[...]
Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20240810054322.2766421-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Count packets, bytes and drop on the datapath, and report
to the user. Since queues are completely freed when the
device is down - accumulate the stats in the main netdev struct.
This means that per-queue stats will only report values since
last reset (per qstat recommendation).
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20240810054322.2766421-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The commit f7866c358733 ("bpf: Fix null pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT")
fixed a NULL pointer dereference panic, but didn't fix the issue that
fails to update attached freplace prog to prog_array map.
Since commit 1c123c567fb1 ("bpf: Resolve fext program type when checking map compatibility"),
freplace prog and its target prog are able to tail call each other.
And the commit 3aac1ead5eb6 ("bpf: Move prog->aux->linked_prog and trampoline into bpf_link on attach")
sets prog->aux->dst_prog as NULL after attaching freplace prog to its
target prog.
After loading freplace the prog_array's owner type is BPF_PROG_TYPE_SCHED_CLS.
Then, after attaching freplace its prog->aux->dst_prog is NULL.
Then, while updating freplace in prog_array the bpf_prog_map_compatible()
incorrectly returns false because resolve_prog_type() returns
BPF_PROG_TYPE_EXT instead of BPF_PROG_TYPE_SCHED_CLS.
After this patch the resolve_prog_type() returns BPF_PROG_TYPE_SCHED_CLS
and update to prog_array can succeed.
Fixes: f7866c358733 ("bpf: Fix null pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT")
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20240728114612.48486-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Commit fc4444941140 ("scsi: mpi3mr: HDB allocation and posting for hardware
and firmware buffers") added the spinlock trigger_lock to the struct
mpi3mr_ioc. However, spin_lock_init() call was not added for it, then the
lock does not work as expected. Also, the kernel reports the message below
when lockdep is enabled.
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
To fix the issue and to avoid the INFO message, add the missing
spin_lock_init() call.
Fixes: fc4444941140 ("scsi: mpi3mr: HDB allocation and posting for hardware and firmware buffers")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20240810042701.661841-2-shinichiro.kawasaki@wdc.com
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The NETFS_RREQ_USE_PGPRIV2 and NETFS_RREQ_WRITE_TO_CACHE flags aren't used
correctly. The problem is that we try to set them up in the request
initialisation, but we the cache may be in the process of setting up still,
and so the state may not be correct. Further, we secondarily sample the
cache state and make contradictory decisions later.
The issue arises because we set up the cache resources, which allows the
cache's ->prepare_read() to switch on NETFS_SREQ_COPY_TO_CACHE - which
triggers cache writing even if we didn't set the flags when allocating.
Fix this in the following way:
(1) Drop NETFS_ICTX_USE_PGPRIV2 and instead set NETFS_RREQ_USE_PGPRIV2 in
->init_request() rather than trying to juggle that in
netfs_alloc_request().
(2) Repurpose NETFS_RREQ_USE_PGPRIV2 to merely indicate that if caching is
to be done, then PG_private_2 is to be used rather than only setting
it if we decide to cache and then having netfs_rreq_unlock_folios()
set the non-PG_private_2 writeback-to-cache if it wasn't set.
(3) Split netfs_rreq_unlock_folios() into two functions, one of which
contains the deprecated code for using PG_private_2 to avoid
accidentally doing the writeback path - and always use it if
USE_PGPRIV2 is set.
(4) As NETFS_ICTX_USE_PGPRIV2 is removed, make netfs_write_begin() always
wait for PG_private_2. This function is deprecated and only used by
ceph anyway, and so label it so.
(5) Drop the NETFS_RREQ_WRITE_TO_CACHE flag and use
fscache_operation_valid() on the cache_resources instead. This has
the advantage of picking up the result of netfs_begin_cache_read() and
fscache_begin_write_operation() - which are called after the object is
initialised and will wait for the cache to come to a usable state.
Just reverting ae678317b95e[1] isn't a sufficient fix, so this need to be
applied on top of that. Without this as well, things like:
rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: {
and:
WARNING: CPU: 13 PID: 3621 at fs/ceph/caps.c:3386
may happen, along with some UAFs due to PG_private_2 not getting used to
wait on writeback completion.
Fixes: 2ff1e97587f4 ("netfs: Replace PG_fscache by setting folio->private and marking dirty")
Reported-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Xiubo Li <xiubli@redhat.com>
cc: Hristo Venev <hristo@venev.name>
cc: Jeff Layton <jlayton@kernel.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: ceph-devel@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/3575457.1722355300@warthog.procyon.org.uk/ [1]
Link: https://lore.kernel.org/r/1173209.1723152682@warthog.procyon.org.uk
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
second writeback flag"
This reverts commit ae678317b95e760607c7b20b97c9cd4ca9ed6e1a.
Revert the patch that removes the deprecated use of PG_private_2 in
netfslib for the moment as Ceph is actually still using this to track
data copied to the cache.
Fixes: ae678317b95e ("netfs: Remove deprecated use of PG_private_2 as a second writeback flag")
Reported-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Xiubo Li <xiubli@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: ceph-devel@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
https: //lore.kernel.org/r/3575457.1722355300@warthog.procyon.org.uk
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The explanatory comment above take_fd() contains a typo, fix that to not
confuse readers.
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20240809135035.748109-1-minipli@grsecurity.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
It's currently possible to create pidfds for kthreads but it is unclear
what that is supposed to mean. Until we have use-cases for it and we
figured out what behavior we want block the creation of pidfds for
kthreads.
Link: https://lore.kernel.org/r/20240731-gleis-mehreinnahmen-6bbadd128383@brauner
Fixes: 32fcb426ec00 ("pid: add pidfd_open()")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Commit 6b8e61472529 ("netfs: Rename CONFIG_FSCACHE_DEBUG to
CONFIG_NETFS_DEBUG") renames the config, but introduces two issues: First,
NETFS_DEBUG mistakenly depends on the non-existing config NETFS, whereas
the actual intended config is called NETFS_SUPPORT. Second, the config
renaming misses to adjust the documentation of the functionality of this
config.
Clean up those two points.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Link: https://lore.kernel.org/r/20240731073902.69262-1-lukas.bulwahn@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
After we switch tmpfs dir operations from simple_dir_operations to
simple_offset_dir_operations, every rename happened will fill new dentry
to dest dir's maple tree(&SHMEM_I(inode)->dir_offsets->mt) with a free
key starting with octx->newx_offset, and then set newx_offset equals to
free key + 1. This will lead to infinite readdir combine with rename
happened at the same time, which fail generic/736 in xfstests(detail show
as below).
1. create 5000 files(1 2 3...) under one dir
2. call readdir(man 3 readdir) once, and get one entry
3. rename(entry, "TEMPFILE"), then rename("TEMPFILE", entry)
4. loop 2~3, until readdir return nothing or we loop too many
times(tmpfs break test with the second condition)
We choose the same logic what commit 9b378f6ad48cf ("btrfs: fix infinite
directory reads") to fix it, record the last_index when we open dir, and
do not emit the entry which index >= last_index. The file->private_data
now used in offset dir can use directly to do this, and we also update
the last_index when we llseek the dir file.
Fixes: a2e459555c5f ("shmem: stable directory offsets")
Signed-off-by: yangerkun <yangerkun@huawei.com>
Link: https://lore.kernel.org/r/20240731043835.1828697-1-yangerkun@huawei.com
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
[brauner: only update last_index after seek when offset is zero like Jan suggested]
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The kernel is writing an object of type __u64, so the ioctl has to be
defined to _IOR(NSIO, 0x5, __u64) instead of _IO(NSIO, 0x5).
Reported-by: Dmitry V. Levin <ldv@strace.io>
Link: https://lore.kernel.org/r/20240730164554.GA18486@altlinux.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This fixes a NULL pointer dereference bug due to a data race which
looks like this:
BUG: kernel NULL pointer dereference, address: 0000000000000008
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 33 PID: 16573 Comm: kworker/u97:799 Not tainted 6.8.7-cm4all1-hp+ #43
Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 10/17/2018
Workqueue: events_unbound netfs_rreq_write_to_cache_work
RIP: 0010:cachefiles_prepare_write+0x30/0xa0
Code: 57 41 56 45 89 ce 41 55 49 89 cd 41 54 49 89 d4 55 53 48 89 fb 48 83 ec 08 48 8b 47 08 48 83 7f 10 00 48 89 34 24 48 8b 68 20 <48> 8b 45 08 4c 8b 38 74 45 49 8b 7f 50 e8 4e a9 b0 ff 48 8b 73 10
RSP: 0018:ffffb4e78113bde0 EFLAGS: 00010286
RAX: ffff976126be6d10 RBX: ffff97615cdb8438 RCX: 0000000000020000
RDX: ffff97605e6c4c68 RSI: ffff97605e6c4c60 RDI: ffff97615cdb8438
RBP: 0000000000000000 R08: 0000000000278333 R09: 0000000000000001
R10: ffff97605e6c4600 R11: 0000000000000001 R12: ffff97605e6c4c68
R13: 0000000000020000 R14: 0000000000000001 R15: ffff976064fe2c00
FS: 0000000000000000(0000) GS:ffff9776dfd40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 000000005942c002 CR4: 00000000001706f0
Call Trace:
<TASK>
? __die+0x1f/0x70
? page_fault_oops+0x15d/0x440
? search_module_extables+0xe/0x40
? fixup_exception+0x22/0x2f0
? exc_page_fault+0x5f/0x100
? asm_exc_page_fault+0x22/0x30
? cachefiles_prepare_write+0x30/0xa0
netfs_rreq_write_to_cache_work+0x135/0x2e0
process_one_work+0x137/0x2c0
worker_thread+0x2e9/0x400
? __pfx_worker_thread+0x10/0x10
kthread+0xcc/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork+0x30/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
Modules linked in:
CR2: 0000000000000008
---[ end trace 0000000000000000 ]---
This happened because fscache_cookie_state_machine() was slow and was
still running while another process invoked fscache_unuse_cookie();
this led to a fscache_cookie_lru_do_one() call, setting the
FSCACHE_COOKIE_DO_LRU_DISCARD flag, which was picked up by
fscache_cookie_state_machine(), withdrawing the cookie via
cachefiles_withdraw_cookie(), clearing cookie->cache_priv.
At the same time, yet another process invoked
cachefiles_prepare_write(), which found a NULL pointer in this code
line:
struct cachefiles_object *object = cachefiles_cres_object(cres);
The next line crashes, obviously:
struct cachefiles_cache *cache = object->volume->cache;
During cachefiles_prepare_write(), the "n_accesses" counter is
non-zero (via fscache_begin_operation()). The cookie must not be
withdrawn until it drops to zero.
The counter is checked by fscache_cookie_state_machine() before
switching to FSCACHE_COOKIE_STATE_RELINQUISHING and
FSCACHE_COOKIE_STATE_WITHDRAWING (in "case
FSCACHE_COOKIE_STATE_FAILED"), but not for
FSCACHE_COOKIE_STATE_LRU_DISCARDING ("case
FSCACHE_COOKIE_STATE_ACTIVE").
This patch adds the missing check. With a non-zero access counter,
the function returns and the next fscache_end_cookie_access() call
will queue another fscache_cookie_state_machine() call to handle the
still-pending FSCACHE_COOKIE_DO_LRU_DISCARD.
Fixes: 12bb21a29c19 ("fscache: Implement cookie user counting and resource pinning")
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240729162002.3436763-2-dhowells@redhat.com
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When struct file_lease was split out from struct file_lock, the name of
the file_lock slab cache was copied to the new slab cache for
file_lease. This name conflict causes confusion in /proc/slabinfo and
/sys/kernel/slab. In particular, it caused failures in drgn's test case
for slab cache merging.
Link: https://github.com/osandov/drgn/blob/9ad29fd86499eb32847473e928b6540872d3d59a/tests/linux_kernel/helpers/test_slab.py#L81
Fixes: c69ff4071935 ("filelock: split leases out of struct file_lock")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Link: https://lore.kernel.org/r/2d1d053da1cafb3e7940c4f25952da4f0af34e38.1722293276.git.osandov@fb.com
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
As in commit 4e527d5841e2 ("iomap: fault in smaller chunks for non-large
folio mappings"), we can see a performance loss for filesystems
which have not yet been converted to large folios.
Fixes: c38f4e96e605 ("netfs: Provide func to copy data to pagecache for buffered write")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240527201735.1898381-1-willy@infradead.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
io_napi_entry() has 2 calling sites. One of them is unlikely to find an
entry and if it does, the timeout should arguable not be updated.
The other io_napi_entry() calling site is overwriting the update made
by io_napi_entry() so the io_napi_entry() timeout value update has no or
little value and therefore is removed.
Signed-off-by: Olivier Langlois <olivier@trillion01.com>
Link: https://lore.kernel.org/r/145b54ff179f87609e20dffaf5563c07cdbcad1a.1723423275.git.olivier@trillion01.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
doing so avoids the overhead of adding napi ids to all the rings that do
not enable napi.
if no id is added to napi_list because napi is disabled,
__io_napi_busy_loop() will not be called.
Signed-off-by: Olivier Langlois <olivier@trillion01.com>
Fixes: b4ccc4dd1330 ("io_uring/napi: enable even with a timeout of 0")
Link: https://lore.kernel.org/r/bd989ccef5fda14f5fd9888faf4fefcf66bd0369.1723400131.git.olivier@trillion01.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Extent Space Efficient (ESE) or thin provisioned volumes need to be
formatted on demand during usual IO processing.
The dasd_ese_needs_format function checks for error codes that signal
the non existence of a proper track format.
The check for incorrect length is to imprecise since other error cases
leading to transport of insufficient data also have this flag set.
This might lead to data corruption in certain error cases for example
during a storage server warmstart.
Fix by removing the check for incorrect length and replacing by
explicitly checking for invalid track format in transport mode.
Also remove the check for file protected since this is not a valid
ESE handling case.
Cc: stable@vger.kernel.org # 5.3+
Fixes: 5e2b17e712cf ("s390/dasd: Add dynamic formatting support for ESE volumes")
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240812125733.126431-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit bc792884b76f ("s390/dasd: Establish DMA alignment").
Quoting the original commit:
linux-next commit bf8d08532bc1 ("iomap: add support for dma aligned
direct-io") changes the alignment requirement to come from the block
device rather than the block size, and the default alignment
requirement is 512-byte boundaries. Since DASD I/O has page
alignments for IDAW/TIDAW requests, let's override this value to
restore the expected behavior.
I mentioned TIDAW, but that was wrong. TIDAWs have no distinct alignment
requirement (per p. 15-70 of POPS SA22-7832-13):
Unless otherwise specified, TIDAWs may designate
a block of main storage on any boundary and length
up to 4K bytes, provided the specified block does not
cross a 4 K-byte boundary.
IDAWs do, but the original commit neglected that while ECKD DASD are
typically formatted in 4096-byte blocks, they don't HAVE to be. Formatting
an ECKD volume with smaller blocks is permitted (dasdfmt -b xxx), and the
problematic commit enforces alignment properties to such a device that
will result in errors, such as:
[test@host ~]# lsdasd -l a367 | grep blksz
blksz: 512
[test@host ~]# mkfs.xfs -f /dev/disk/by-path/ccw-0.0.a367-part1
meta-data=/dev/dasdc1 isize=512 agcount=4, agsize=230075 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=1
= reflink=1 bigtime=1 inobtcount=1 nrext64=1
data = bsize=4096 blocks=920299, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=16384, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
error reading existing superblock: Invalid argument
mkfs.xfs: pwrite failed: Invalid argument
libxfs_bwrite: write failed on (unknown) bno 0x70565c/0x100, err=22
mkfs.xfs: Releasing dirty buffer to free list!
found dirty buffer (bulk) on free list!
mkfs.xfs: pwrite failed: Invalid argument
...snipped...
The original commit omitted the FBA discipline for just this reason,
but the formatted block size of the other disciplines was overlooked.
The solution to all of this is to revert to the original behavior,
such that the block size can be respected. There were two commits [1]
that moved this code in the interim, so a straight git-revert is not
possible, but the change is straightforward.
But what of the original problem? That was manifested with a direct-io
QEMU guest, where QEMU itself was changed a month or two later with
commit 25474d90aa ("block: use the request length for iov alignment")
such that the blamed kernel commit is unnecessary.
[1] commit 0127a47f58c6 ("dasd: move queue setup to common code")
commit fde07a4d74e3 ("dasd: use the atomic queue limits API")
Fixes: bc792884b76f ("s390/dasd: Establish DMA alignment")
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240812125733.126431-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"While the ideapad concurrency fix itself is relatively
straightforward, it required moving code around and adding a bit of
supporting infrastructure to have a clean inter-driver interface. This
shows up in the diffstats.
- ideapad-laptop / lenovo-ymc: Protect VPC calls with a mutex
- amd/pmf: Query HPD data also when ALS is disabled"
* tag 'platform-drivers-x86-v6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: ideapad-laptop: add a mutex to synchronize VPC commands
platform/x86: ideapad-laptop: move ymc_trigger_ec from lenovo-ymc
platform/x86: ideapad-laptop: introduce a generic notification chain
platform/x86/amd/pmf: Fix to Update HPD Data When ALS is Disabled
|
|
Pull fd bitmap fix from Al Viro:
"Fix bitmap corruption on close_range() by cleaning up
copy_fd_bitmaps()"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix bitmap corruption on close_range() with CLOSE_RANGE_UNSHARE
|
|
When enabling UBSAN on Raspberry Pi 5, we get the following warning:
[ 387.894977] UBSAN: array-index-out-of-bounds in drivers/gpu/drm/v3d/v3d_sched.c:320:3
[ 387.903868] index 7 is out of range for type '__u32 [7]'
[ 387.909692] CPU: 0 PID: 1207 Comm: kworker/u16:2 Tainted: G WC 6.10.3-v8-16k-numa #151
[ 387.919166] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT)
[ 387.925961] Workqueue: v3d_csd drm_sched_run_job_work [gpu_sched]
[ 387.932525] Call trace:
[ 387.935296] dump_backtrace+0x170/0x1b8
[ 387.939403] show_stack+0x20/0x38
[ 387.942907] dump_stack_lvl+0x90/0xd0
[ 387.946785] dump_stack+0x18/0x28
[ 387.950301] __ubsan_handle_out_of_bounds+0x98/0xd0
[ 387.955383] v3d_csd_job_run+0x3a8/0x438 [v3d]
[ 387.960707] drm_sched_run_job_work+0x520/0x6d0 [gpu_sched]
[ 387.966862] process_one_work+0x62c/0xb48
[ 387.971296] worker_thread+0x468/0x5b0
[ 387.975317] kthread+0x1c4/0x1e0
[ 387.978818] ret_from_fork+0x10/0x20
[ 387.983014] ---[ end trace ]---
This happens because the UAPI provides only seven configuration
registers and we are reading the eighth position of this u32 array.
Therefore, fix the out-of-bounds read in `v3d_csd_job_run()` by
accessing only seven positions on the '__u32 [7]' array. The eighth
register exists indeed on V3D 7.1, but it isn't currently used. That
being so, let's guarantee that it remains unused and add a note that it
could be set in a future patch.
Fixes: 0ad5bc1ce463 ("drm/v3d: fix up register addresses for V3D 7.x")
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809152001.668314-1-mcanal@igalia.com
|
|
Jakub Kicinski says:
====================
ethtool: rss: driver tweaks and netlink context dumps
This series is a semi-related collection of RSS patches.
Main point is supporting dumping RSS contexts via ethtool netlink.
At present additional RSS contexts can be queried one by one, and
assuming user know the right IDs. This series uses the XArray
added by Ed to provide netlink dump support for ETHTOOL_GET_RSS.
Patch 1 is a trivial selftest debug patch.
Patch 2 coverts mvpp2 for no real reason other than that I had
a grand plan of converting all drivers at some stage.
Patch 3 removes a now moot check from mlx5 so that all tests
can pass.
Patch 4 and 5 make a bit used for context support optional,
for easier grepping of drivers which need converting
if nothing else.
Patch 6 OTOH adds a new cap bit; some devices don't support
using a different key per context and currently act
in surprising ways.
Patch 7 and 8 update the RSS netlink code to use XArray.
Patch 9 and 10 add support for dumping contexts.
Patch 11 and 12 are small adjustments to spec and a new test.
I'm getting distracted with other work, so probably won't have
the time soon to complete next steps, but things which are missing
are (and some of these may be bad ideas):
- better discovery
Some sort of API to tell the user who many contexts the device
can create. Upper bound, devices often share contexts between
ports etc. so it's hard to tell exactly and upfront number of
contexts for a netdev. But order of magnitude (4 vs 10s) may
be enough for container management system to know whether to bother.
- create/modify/delete via netlink
The only question here is how to handle all the tricky IOCTL
legacy. "No change" maps trivially to attribute not present.
"reset" (indir_size = 0) probably needs to be a new NLA_FLAG?
- better table size handling
The current API assumes the LUT has fixed size, which isn't
true for modern devices. We should have better APIs for the
drivers to resize the tables, and in user facing API -
the ability to specify pattern and min size rather than
exact table expected (sort of like ethtool CLI already does).
- recounted / socket-bound contexts
Support for contexts which get "cleaned up" when their parent
netlink socket gets closed. The major catch is that ntuple
filters (which we don't currently track) depend on the context,
so we need auto-removal for both.
v5:
- fix build
v4: https://lore.kernel.org/20240809031827.2373341-1-kuba@kernel.org
- adjust to the meaning of max context from net
v3: https://lore.kernel.org/20240806193317.1491822-1-kuba@kernel.org
- quite a few code comments and commit message changes
- mvpp2: fix interpretation of max_context_id (I'll take care of
the net -> net-next merge as needed)
- filter by ifindex in the selftest
v2: https://lore.kernel.org/20240803042624.970352-1-kuba@kernel.org
- fix bugs and build in mvpp2
v1: https://lore.kernel.org/20240802001801.565176-1-kuba@kernel.org
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a test for dumping RSS contexts. Make sure indir table
and key are sane when contexts are created with various
combination of inputs. Test the dump filtering by ifname
and start-context.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Indirection table is dumped as a raw u32 array, decode it.
It's tempting to decode hash key, too, but it is an actual
bitstream, so leave it be for now.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Applications may want to deal with dynamic RSS contexts only.
So dumping context 0 will be counter-productive for them.
Support starting the dump from a given context ID.
Alternative would be to implement a dump flag to skip just
context 0, not sure which is better...
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that we track RSS contexts in the core we can easily dump
them. This is a major introspection improvement, as previously
the only way to find all contexts would be to try all ids
(of which there may be 2^32 - 1).
Don't use the XArray iterators (like xa_for_each_start()) as they
do not move the index past the end of the array once done, which
caused multiple bugs in Netlink dumps in the past.
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IOCTL already uses the XArray when reporting info about additional
contexts. Do the same thing in netlink code.
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Factor calling device ops out of rss_prepare_data().
Next patch will add alternative path using xarray.
No functional changes.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
marvell/otx2 and mvpp2 do not support setting different
keys for different RSS contexts. Contexts have separate
indirection tables but key is shared with all other contexts.
This is likely fine, indirection table is the most important
piece.
Don't report the key-related parameters from such drivers.
This prevents driver-errors, e.g. otx2 always writes
the main key, even when user asks to change per-context key.
The second reason is that without this change tracking
the keys by the core gets complicated. Even if the driver
correctly reject setting key with rss_context != 0,
change of the main key would have to be reflected in
the XArray for all additional contexts.
Since the additional contexts don't have their own keys
not including the attributes (in Netlink speak) seems
intuitive. ethtool CLI seems to deal with it just fine.
Having to set the flag in majority of the drivers is
a bit tedious but not reporting the key is a safer
default.
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove .cap_rss_ctx_supported from drivers which moved to the new API.
This makes it easy to grep for drivers which still need to be converted.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
cap_rss_ctx_supported was created because the API for creating
and configuring additional contexts is mux'ed with the normal
RSS API. Presence of ops does not imply driver can actually
support rss_context != 0 (in fact drivers mostly ignore that
field). cap_rss_ctx_supported lets core check that the driver
is context-aware before calling it.
Now that we have .create_rxfh_context, there is no such
ambiguity. We can depend on presence of the op.
Make setting the bit optional.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit 24ac7e544081 ("ethtool: use the rss context XArray
in ring deactivation safety-check") core will prevent queues from
being disabled while being used by additional RSS contexts.
The safety check is no longer necessary, and core will do a more
accurate job of only rejecting changes which can actually break
things.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
