| Age | Commit message (Collapse) | Author |
|---|
|
Commit 3ed2b549b39f ("ALSA: pcm: fix wait_time calculations") corrected
the PCM wait_time calculations and in doing so reduced the calculated
wait_time. This exposed an issue with the Tegra Master Volume Control
(MVC) device where the reduced wait_time caused the MVC to fail. For now
fix this by setting the default wait_time for Tegra to be 500ms.
Fixes: 3ed2b549b39f ("ALSA: pcm: fix wait_time calculations")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230613093453.13927-1-jonathanh@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
LS1028A is using DMA with LPUART. Having RX watermark set to 1, means
DMA transactions are started only after receiving the second character.
On other platforms with newer LPUART IP, Receiver Idle Empty function
initiates the DMA request after the receiver is idling for 4 characters.
But this feature is missing on LS1028A, which is causing a 1-character
delay in the RX direction on this platform.
Set RX watermark to 0 to initiate RX DMA after each character.
Link: https://lore.kernel.org/linux-serial/20230607103459.1222426-1-robert.hodaszi@digi.com/
Fixes: 9ad9df844754 ("tty: serial: fsl_lpuart: Fix the wrong RXWATER setting for rx dma case")
Cc: stable <stable@kernel.org>
Signed-off-by: Robert Hodaszi <robert.hodaszi@digi.com>
Message-ID: <20230609121334.1878626-1-robert.hodaszi@digi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The call site of nouveau_dsm_pci_probe() uses single set of output
variables for all invocations. So, we must not write anything to them
unless it's an NVIDIA device. Otherwise, if we are called with another
device after the NVIDIA device, we'll clober the result of the NVIDIA
device.
For example, if the other device doesn't have _PR3 resources, the
detection later would miss the presence of power resource support, and
the rest of the code will keep using Optimus DSM, breaking power
management for that machine.
Also, because we're detecting NVIDIA's DSM, it doesn't make sense to run
this detection on a non-NVIDIA device anyway. Thus, check at the
beginning of the detection code if this is an NVIDIA card, and just
return if it isn't.
This, together with commit d22915d22ded ("drm/nouveau/devinit/tu102-:
wait for GFW_BOOT_PROGRESS == COMPLETED") developed independently and
landed earlier, fixes runtime power management of the NVIDIA card in
Lenovo Legion 5-15ARH05. Without this patch, the GPU resumption code
will "timeout", sometimes hanging userspace.
As a bonus, we'll also stop preventing _PR3 usage from the bridge for
unrelated devices, which is always nice, I guess.
Fixes: ccfc2d5cdb02 ("drm/nouveau: Use generic helper to check _PR3 presence")
Signed-off-by: Ratchanan Srirattanamet <peathot@hotmail.com>
Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/79
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/DM6PR19MB2780805D4BE1E3F9B3AC96D0BC409@DM6PR19MB2780.namprd19.prod.outlook.com
|
|
usb_udc_connect_control(), soft_connect_store() and
usb_gadget_deactivate() can potentially race against each other to invoke
usb_gadget_connect()/usb_gadget_disconnect(). To prevent this, guard
udc->started, gadget->allow_connect, gadget->deactivate and
gadget->connect with connect_lock so that ->pullup() is only invoked when
the gadget is bound, started and not deactivated. The routines
usb_gadget_connect_locked(), usb_gadget_disconnect_locked(),
usb_udc_connect_control_locked(), usb_gadget_udc_start_locked(),
usb_gadget_udc_stop_locked() are called with this lock held.
An earlier version of this commit was reverted due to the crash reported in
https://lore.kernel.org/all/ZF4BvgsOyoKxdPFF@francesco-nb.int.toradex.com/.
commit 16737e78d190 ("usb: gadget: udc: core: Offload usb_udc_vbus_handler processing")
addresses the crash reported.
Cc: stable@vger.kernel.org
Fixes: 628ef0d273a6 ("usb: udc: add usb_udc_vbus_handler")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Message-ID: <20230609010227.978661-2-badhri@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usb_udc_vbus_handler() can be invoked from interrupt context by irq
handlers of the gadget drivers, however, usb_udc_connect_control() has
to run in non-atomic context due to the following:
a. Some of the gadget driver implementations expect the ->pullup
callback to be invoked in non-atomic context.
b. usb_gadget_disconnect() acquires udc_lock which is a mutex.
Hence offload invocation of usb_udc_connect_control()
to workqueue.
UDC should not be pulled up unless gadget driver is bound. The new flag
"allow_connect" is now set by gadget_bind_driver() and cleared by
gadget_unbind_driver(). This prevents work item to pull up the gadget
even if queued when the gadget driver is already unbound.
Cc: stable@vger.kernel.org
Fixes: 1016fc0c096c ("USB: gadget: Fix obscure lockdep violation for udc_mutex")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Message-ID: <20230609010227.978661-1-badhri@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The current implementation mistakenly performs a & operation on
the output of sysfs_emit. This patch performs the & operation before
calling sysfs_emit.
Fixes: 662a60102c12 ("usb: typec: Separate USB Power Delivery from USB Type-C")
Cc: stable <stable@kernel.org>
Reported-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Pavan Holla <pholla@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Message-ID: <20230607193328.3359487-1-pholla@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Cancel command was passed to the write callback as the
offset instead of as the actual command which caused NULL
pointer dereference.
Reported-by: Stephan Bolten <stephan.bolten@gmx.net>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217517
Fixes: 094902bc6a3c ("usb: typec: ucsi: Always cancel the command if PPM reports BUSY condition")
Cc: stable@vger.kernel.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Message-ID: <20230606115802.79339-1-heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some dwc3 glue drivers are currently accessing the driver data of the
child core device directly, which is clearly a bad idea as the child may
not have probed yet or may have been unbound from its driver.
As a workaround until the glue drivers have been fixed, clear the driver
data pointer before allowing the glue parent device to runtime suspend
to prevent its driver from accessing data that has been freed during
unbind.
Fixes: 6dd2565989b4 ("usb: dwc3: add imx8mp dwc3 glue layer driver")
Fixes: 6895ea55c385 ("usb: dwc3: qcom: Configure wakeup interrupts during suspend")
Cc: stable@vger.kernel.org # 5.12
Cc: Li Jun <jun.li@nxp.com>
Cc: Sandeep Maheswaram <quic_c_sanm@quicinc.com>
Cc: Krishna Kurapati <quic_kriskura@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Message-ID: <20230607100540.31045-3-johan+linaro@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Qualcomm dwc3 glue driver is currently accessing the driver data of
the child core device during suspend and on wakeup interrupts. This is
clearly a bad idea as the child may not have probed yet or could have
been unbound from its driver.
The first such layering violation was part of the initial version of the
driver, but this was later made worse when the hack that accesses the
driver data of the grand child xhci device to configure the wakeup
interrupts was added.
Fixing this properly is not that easily done, so add a sanity check to
make sure that the child driver data is non-NULL before dereferencing it
for now.
Note that this relies on subtleties like the fact that driver core is
making sure that the parent is not suspended while the child is probing.
Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/all/20230325165217.31069-4-manivannan.sadhasivam@linaro.org/
Fixes: d9152161b4bf ("usb: dwc3: Add Qualcomm DWC3 glue layer driver")
Fixes: 6895ea55c385 ("usb: dwc3: qcom: Configure wakeup interrupts during suspend")
Cc: stable@vger.kernel.org # 3.18: a872ab303d5d: "usb: dwc3: qcom: fix use-after-free on runtime-PM wakeup"
Cc: Sandeep Maheswaram <quic_c_sanm@quicinc.com>
Cc: Krishna Kurapati <quic_kriskura@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Message-ID: <20230607100540.31045-2-johan+linaro@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Consider a scenario where cable disconnect happens when there is an active
usb reqest queued to the UDC. As part of the disconnect we would issue an
end transfer with no interrupt-on-completion before giving back this
request. Since we are giving back the request without skipping TRBs the
num_trbs field of dwc3_request still holds the stale value previously used.
Function drivers re-use same request for a given bind-unbind session and
hence their dwc3_request context gets preserved across cable
disconnect/connect. When such a request gets re-queued after cable connect,
we would increase the num_trbs field on top of the previous stale value
thus incorrectly representing the number of TRBs used. Fix this by
resetting num_trbs field before giving back the request.
Fixes: 09fe1f8d7e2f ("usb: dwc3: gadget: track number of TRBs per request")
Cc: stable <stable@kernel.org>
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Message-ID: <1685654850-8468-1-git-send-email-quic_eserrao@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently {modprobe, bind} after {rmmod, unbind} results in probe failure.
genirq: Flags mismatch irq 22. 00000004 (85070400.usb3drd) vs. 00000004 (85070400.usb3drd)
renesas_usb3: probe of 85070000.usb3peri failed with error -16
The reason is, it is trying to register an interrupt handler for the same
IRQ twice. The devm_request_irq() was called with the parent device.
So the interrupt handler won't be unregistered when the usb3-peri device
is unbound.
Fix this issue by replacing "parent dev"->"dev" as the irq resource
is managed by this driver.
Fixes: 9cad72dfc556 ("usb: gadget: Add support for RZ/V2M USB3DRD driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Message-ID: <20230530161720.179927-1-biju.das.jz@bp.renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As clk_core_populate_parent_map() checks clk_init_data.num_parents
first, and checks clk_init_data.parent_names[] before
clk_init_data.parent_data[] and clk_init_data.parent_hws[].
Therefore the clk_init_data structure needs to be explicitly initialised
to prevent an unexpected crash if clk_init_data.parent_names[] is a
random value.
CPU 0 Unable to handle kernel paging request at virtual address 0000000000000dc0, era == 9000000002986290, ra == 900000000298624c
Oops[#1]:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.4.0-rc2+ #4582
pc 9000000002986290 ra 900000000298624c tp 9000000100094000 sp 9000000100097a60
a0 9000000104541e00 a1 0000000000000000 a2 0000000000000dc0 a3 0000000000000001
a4 90000001000979f0 a5 90000001800977d7 a6 0000000000000000 a7 900000000362a000
t0 90000000034f3548 t1 6f8c2a9cb5ab5f64 t2 0000000000011340 t3 90000000031cf5b0
t4 0000000000000dc0 t5 0000000000000004 t6 0000000000011300 t7 9000000104541e40
t8 000000000005a4f8 u0 9000000104541e00 s9 9000000104541e00 s0 9000000104bc4700
s1 9000000104541da8 s2 0000000000000001 s3 900000000356f9d8 s4 ffffffffffffffff
s5 0000000000000000 s6 0000000000000dc0 s7 90000000030d0a88 s8 0000000000000000
ra: 900000000298624c __clk_register+0x228/0x84c
ERA: 9000000002986290 __clk_register+0x26c/0x84c
CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
PRMD: 00000004 (PPLV0 +PIE -PWE)
EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
ECFG: 00071c1c (LIE=2-4,10-12 VS=7)
ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0)
BADV: 0000000000000dc0
PRID: 0014a000 (Loongson-64bit, )
Modules linked in:
Process swapper/0 (pid: 1, threadinfo=(____ptrval____), task=(____ptrval____))
Stack : 90000000031c1810 90000000030d0a88 900000000325bac0 90000000034f3548
90000001002ab410 9000000104541e00 0000000000000dc0 9000000003150098
90000000031c1810 90000000031a0460 900000000362a000 90000001002ab410
900000000362a000 9000000104541da8 9000000104541de8 90000001002ab410
900000000362a000 9000000002986a68 90000000034f3ed8 90000000030d0aa8
9000000104541da8 900000000298d3b8 90000000031c1810 0000000000000000
90000000034f3ed8 90000000030d0aa8 0000000000000dc0 90000000030d0a88
90000001002ab410 900000000298d401 0000000000000000 6f8c2a9cb5ab5f64
90000000034f4000 90000000030d0a88 9000000003a48a58 90000001002ab410
9000000104bd81a8 900000000298d484 9000000100020260 0000000000000000
...
Call Trace:
[<9000000002986290>] __clk_register+0x26c/0x84c
[<9000000002986a68>] devm_clk_hw_register+0x5c/0xe0
[<900000000298d3b8>] loongson2_clk_register.constprop.0+0xdc/0x10c
[<900000000298d484>] loongson2_clk_probe+0x9c/0x4ac
[<9000000002a4eba4>] platform_probe+0x68/0xc8
[<9000000002a4bf80>] really_probe+0xbc/0x2f0
[<9000000002a4c23c>] __driver_probe_device+0x88/0x128
[<9000000002a4c318>] driver_probe_device+0x3c/0x11c
[<9000000002a4c5dc>] __driver_attach+0x98/0x18c
[<9000000002a49ca0>] bus_for_each_dev+0x80/0xe0
[<9000000002a4b0dc>] bus_add_driver+0xfc/0x1ec
[<9000000002a4d4a8>] driver_register+0x68/0x134
[<90000000020f0110>] do_one_initcall+0x50/0x188
[<9000000003150f00>] kernel_init_freeable+0x224/0x294
[<90000000030240fc>] kernel_init+0x20/0x110
[<90000000020f1568>] ret_from_kernel_thread+0xc/0xa4
Fixes: acc0ccffec50 ("clk: clk-loongson2: add clock controller driver support")
Cc: stable@vger.kernel.org
Cc: Yinbo Zhu <zhuyinbo@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/20230524014924.2869051-1-zhoubinbin@loongson.cn
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The given operations are inverted for the wrong registers which makes
multiple of the mt8365 hardware units unusable. In my setup at least usb
did not work.
Fixed by swapping the operations with the inverted ones.
Reported-by: Alexandre Mergnat <amergnat@baylibre.com>
Fixes: 905b7430d3cc ("clk: mediatek: mt8365: Convert simple_gate to mtk_gate clocks")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/r/20230511133226.913600-1-msp@baylibre.com
Tested-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
ULONG_MAX is used by a few drivers to figure out the highest available
clock rate via clk_round_rate(clk, ULONG_MAX). Since abs() takes a
signed value as input, the current logic effectively calculates with
ULONG_MAX = -1, which results in the worst parent clock being chosen
instead of the best one.
For example on Rockchip RK3588 the eMMC driver tries to figure out
the highest available clock rate. There are three parent clocks
available resulting in the following rate diffs with the existing
logic:
GPLL: abs(18446744073709551615 - 1188000000) = 1188000001
CPLL: abs(18446744073709551615 - 1500000000) = 1500000001
XIN24M: abs(18446744073709551615 - 24000000) = 24000001
As a result the clock framework will promote a maximum supported
clock rate of 24 MHz, even though 1.5GHz are possible. With the
updated logic any casting between signed and unsigned is avoided
and the numbers look like this instead:
GPLL: 18446744073709551615 - 1188000000 = 18446744072521551615
CPLL: 18446744073709551615 - 1500000000 = 18446744072209551615
XIN24M: 18446744073709551615 - 24000000 = 18446744073685551615
As a result the parent with the highest acceptable rate is chosen
instead of the parent clock with the lowest one.
Cc: stable@vger.kernel.org
Fixes: 49502408007b ("mmc: sdhci-of-dwcmshc: properly determine max clock on Rockchip")
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230526171057.66876-2-sebastian.reichel@collabora.com
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Matthieu Baerts says:
====================
selftests: mptcp: skip tests not supported by old kernels (part 3)
After a few years of increasing test coverage in the MPTCP selftests, we
realised [1] the last version of the selftests is supposed to run on old
kernels without issues.
Supporting older versions is not that easy for this MPTCP case: these
selftests are often validating the internals by checking packets that
are exchanged, when some MIB counters are incremented after some
actions, how connections are getting opened and closed in some cases,
etc. In other words, it is not limited to the socket interface between
the userspace and the kernelspace.
In addition to that, the current MPTCP selftests run a lot of different
sub-tests but the TAP13 protocol used in the selftests don't support
sub-tests: one failure in sub-tests implies that the whole selftest is
seen as failed at the end because sub-tests are not tracked. It is then
important to skip sub-tests not supported by old kernels.
To minimise the modifications and reduce the complexity to support old
versions, the idea is to look at external signs and skip the whole
selftest or just some sub-tests before starting them. This cannot be
applied in all cases.
Similar to the second part, this third one focuses on marking different
sub-tests as skipped if some MPTCP features are not supported. This
time, only in "mptcp_join.sh" selftest, the remaining one, is modified.
Several techniques are used here to achieve this task:
- Before starting some tests:
- Check if a file (sysctl knob) is present: that's what patch 12/17 is
doing for the userspace PM feature.
- Check if a required kernel symbol is present in /proc/kallsyms:
patches 9, 10, 14 and 15/17 are using this technique.
- Check if it is possible to setup a particular network environment
requiring Netfilter or TC: if the preparation step fail, the linked
sub-test is marked as skipped. Patch 5/17 is doing that.
- Check if a MIB counter is available: patches 7 and 13/17 do that.
- Check if the kernel version is newer than a specific one: patch 1/17
adds some helpers in mptcp_lib.sh to ease its use. That's not ideal
and it is only used as last resort but as mentioned above, it is
important to skip tests if they are not supported not to have the
whole selftest always being marked as failed on old kernels. Patches
11 and 17/17 are checking the kernel version. An alternative would
be to ignore the results for some sub-tests but that's not ideal
too. Note that SELFTESTS_MPTCP_LIB_NO_KVERSION_CHECK env var can be
set to 1 not to skip these tests if the running kernel doesn't have
a supported version.
- After having launched the tests:
- Adapt the expectations depending on the presence of a kernel symbol
(patch 6/17) or a kernel version (patch 8/17).
- Check is a MIB counter is available and skip the verification if
not. Patch 4/17 is using this technique.
Before skipping tests, SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var
value is checked: if it is set to 1, the test is marked as "failed"
instead of "skipped". MPTCP public CI expects to have all features
supported and it sets this env var to 1 to catch regressions in these
new checks.
Patch 2/17 uses 'iptables-legacy' if available because it might be
needed when using an older kernel not supporting iptables-nft.
Patch 3/17 adds some helpers used in the other patches mentioned to
easily mark sub-tests as skipped.
Patch 16/17 uniforms MPTCP Join "listener" tests: it was imported code
from userspace_pm.sh but without using the "code style" and ways of
using tools and printing messages from MPTCP Join selftest.
Link: https://lore.kernel.org/stable/CA+G9fYtDGpgT4dckXD-y-N92nqUxuvue_7AtDdBcHrbOMsDZLg@mail.gmail.com/ [1]
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
====================
Link: https://lore.kernel.org/r/20230609-upstream-net-20230610-mptcp-selftests-support-old-kernels-part-3-v1-0-2896fe2ee8a3@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of a mix of subflows in v4 and v6 by the
in-kernel PM introduced by commit b9d69db87fb7 ("mptcp: let the
in-kernel PM use mixed IPv4 and IPv6 addresses").
It looks like there is no external sign we can use to predict the
expected behaviour. Instead of accepting different behaviours and thus
not really checking for the expected behaviour, we are looking here for
a specific kernel version. That's not ideal but it looks better than
removing the test because it cannot support older kernel versions.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: ad3493746ebe ("selftests: mptcp: add test-cases for mixed v4/v6 subflows")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The alignment was different from the other tests because tabs were used
instead of spaces.
While at it, also use 'echo' instead of 'printf' to print the result to
keep the same style as done in the other sub-tests. And, even if it
should be better with, also remove 'stdbuf' and sed's '--unbuffered'
option because they are not used in the other subtests and they are not
available when using a minimal environment with busybox.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 178d023208eb ("selftests: mptcp: listener test for in-kernel PM")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of PM listener events introduced by commit
f8c9dfbd875b ("mptcp: add pm listener events").
It is possible to look for "mptcp_event_pm_listener" in kallsyms to know
in advance if the kernel supports this feature.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 178d023208eb ("selftests: mptcp: listener test for in-kernel PM")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of sending an MP_PRIO signal for the initial
subflow, introduced by commit c157bbe776b7 ("mptcp: allow the in kernel
PM to set MPC subflow priority").
It is possible to look for "mptcp_subflow_send_ack" in kallsyms because
it was needed to introduce the mentioned feature. So we can know in
advance if the feature is supported instead of trying and accepting any
results.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 914f6a59b10f ("selftests: mptcp: add MPC backup tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of the MP_FAIL / infinite mapping introduced
by commit 1e39e5a32ad7 ("mptcp: infinite mapping sending") and the
following ones.
It is possible to look for one of the infinite mapping counters to know
in advance if the this feature is available.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: b6e074e171bc ("selftests: mptcp: add infinite map testcase")
Cc: stable@vger.kernel.org
Fixes: 2ba18161d407 ("selftests: mptcp: add MP_FAIL reset testcase")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of the userspace PM introduced by commit
4638de5aefe5 ("mptcp: handle local addrs announced by userspace PMs")
and the following ones.
It is possible to look for the MPTCP pm_type's sysctl knob to know in
advance if the userspace PM is available.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 5ac1d2d63451 ("selftests: mptcp: Add tests for userspace PM type")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of the fullmesh flag for the in-kernel PM
introduced by commit 2843ff6f36db ("mptcp: remote addresses fullmesh")
and commit 1a0d6136c5f0 ("mptcp: local addresses fullmesh").
It looks like there is no easy external sign we can use to predict the
expected behaviour. We could add the flag and then check if it has been
added but for that, and for each fullmesh test, we would need to setup a
new environment, do the checks, clean it and then only start the test
from yet another clean environment. To keep it simple and avoid
introducing new issues, we look for a specific kernel version. That's
not ideal but an acceptable solution for this case.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 6a0653b96f5d ("selftests: mptcp: add fullmesh setting tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
Commit bccefb762439 ("selftests: mptcp: simplify pm_nl_change_endpoint")
has simplified the way the backup flag is set on an endpoint. Instead of
doing:
./pm_nl_ctl set 10.0.2.1 flags backup
Now we do:
./pm_nl_ctl set id 1 flags backup
The new way is easier to maintain but it is also incompatible with older
kernels not supporting the implicit endpoints putting in place the
infrastructure to set flags per ID, hence the second Fixes tag.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: bccefb762439 ("selftests: mptcp: simplify pm_nl_change_endpoint")
Cc: stable@vger.kernel.org
Fixes: 4cf86ae84c71 ("mptcp: strict local address ID selection")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of the implicit endpoints introduced by
commit d045b9eb95a9 ("mptcp: introduce implicit endpoints").
It is possible to look for "mptcp_subflow_send_ack" in kallsyms because
it was needed to introduce the mentioned feature. So we can know in
advance if the feature is supported instead of trying and accepting any
results.
Note that here and in the following commits, we re-do the same check for
each sub-test of the same function for a few reasons. The main one is
not to break the ID assign to each test in order to be able to easily
compare results between different kernel versions. Also, we can still
run a specific test even if it is skipped. Another reason is that it
makes it clear during the review that a specific subtest will be skipped
or not under certain conditions. At the end, it looks OK to call the
exact same helper multiple times: it is not a critical path and it is
the same code that is executed, not really more cases to maintain.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
At some points, a new feature caused internal behaviour changes we are
verifying in the selftests, see the Fixes tag below. It was not a UAPI
change but because in these selftests, we check some internal
behaviours, it is normal we have to adapt them from time to time after
having added some features.
It looks like there is no external sign we can use to predict the
expected behaviour. Instead of accepting different behaviours and thus
not really checking for the expected behaviour, we are looking here for
a specific kernel version. That's not ideal but it looks better than
removing the test because it cannot support older kernel versions.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 6fa0174a7c86 ("mptcp: more careful RM_ADDR generation")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of MP_FASTCLOSE introduced in commit
f284c0c77321 ("mptcp: implement fastclose xmit path").
If the MIB counter is not available, the test cannot be verified and the
behaviour will not be the expected one. So we can skip the test if the
counter is missing.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 01542c9bf9ab ("selftests: mptcp: add fastclose testcase")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
At some points, a new feature caused internal behaviour changes we are
verifying in the selftests, see the Fixes tag below. It was not a uAPI
change but because in these selftests, we check some internal
behaviours, it is normal we have to adapt them from time to time after
having added some features.
It is possible to look for "mptcp_pm_subflow_check_next" in kallsyms
because it was needed to introduce the mentioned feature. So we can know
in advance what the behaviour we are expecting here instead of
supporting the two behaviours.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
Some tests are using IPTables and/or TC commands to force some
behaviours. If one of these commands fails -- likely because some
features are not available due to missing kernel config -- we should
intercept the error and skip the tests requiring these features.
Note that if we expect to have these features available and if
SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, the tests
will be marked as failed instead of skipped.
This patch also replaces the 'exit 1' by 'return 1' not to stop the
selftest in the middle without the conclusion if there is an issue with
NF or TC.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 8d014eaa9254 ("selftests: mptcp: add ADD_ADDR timeout test case")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the MPTCP MIB counters introduced in commit fc518953bc9c
("mptcp: add and use MIB counter infrastructure") and more later. The
MPTCP Join selftest heavily relies on these counters.
If a counter is not supported by the kernel, it is not displayed when
using 'nstat -z'. We can then detect that and skip the verification. A
new helper (get_counter()) has been added to do the required checks and
return an error if the counter is not available.
Note that if we expect to have these features available and if
SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, the tests
will be marked as failed instead of skipped.
This new helper also makes sure we get the exact counter we want to
avoid issues we had in the past, e.g. with MPTcpExtRmAddr and
MPTcpExtRmAddrDrop sharing the same prefix. While at it, we uniform the
way we fetch a MIB counter.
Note for the backports: we rarely change these modified blocks so if
there is are conflicts, it is very likely because a counter is not used
in the older kernels and we don't need that chunk.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: b08fbf241064 ("selftests: add test-cases for MPTCP MP_JOIN")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
Here are some helpers that will be used to mark subtests as skipped if a
feature is not supported. Marking as a fix for the commit introducing
this selftest to help with the backports.
While at it, also check if kallsyms feature is available as it will also
be used in the following commits to check if MPTCP features are
available before starting a test.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: b08fbf241064 ("selftests: add test-cases for MPTCP MP_JOIN")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
IPTables commands using 'iptables-nft' fail on old kernels, at least
5.15 because it doesn't see the default IPTables chains:
$ iptables -L
iptables/1.8.2 Failed to initialize nft: Protocol not supported
As a first step before switching to NFTables, we can use iptables-legacy
if available.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 8d014eaa9254 ("selftests: mptcp: add ADD_ADDR timeout test case")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
A new function is now available to easily detect if a feature is
missing by looking at the kernel version. That's clearly not ideal and
this kind of check should be avoided as soon as possible. But sometimes,
there are no external sign that a "feature" is available or not:
internal behaviours can change without modifying the uAPI and these
selftests are verifying the internal behaviours. Sometimes, the only
(easy) way to verify if the feature is present is to run the test but
then the validation cannot determine if there is a failure with the
feature or if the feature is missing. Then it looks better to check the
kernel version instead of having tests that can never fail. In any case,
we need a solution not to have a whole selftest being marked as failed
just because one sub-test has failed.
Note that this env var car be set to 1 not to do such check and run the
linked sub-test: SELFTESTS_MPTCP_LIB_NO_KVERSION_CHECK.
This new helper is going to be used in the following commits. In order
to ease the backport of such future patches, it would be good if this
patch is backported up to the introduction of MPTCP selftests, hence the
Fixes tag below: this type of check was supposed to be done from the
beginning.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Maxime Chevallier says:
====================
fixes for Q-USGMII speeds and autoneg
This is the second version of a small changeset for QUSGMII support,
fixing inconsistencies in reported max speed and control word parsing.
As reported here [1], there are some inconsistencies for the Q-USGMII
mode speeds and configuration. The first patch in this fixup series
makes so that we correctly report the max speed of 1Gbps for this mode.
The second patch uses a dedicated helper to decode the control word.
This is necessary as although USGMII control words are close to USXGMII,
they don't support the same speeds.
[1] : https://lore.kernel.org/netdev/ZHnd+6FUO77XFJvQ@shell.armlinux.org.uk/
====================
Link: https://lore.kernel.org/r/20230609080305.546028-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Q-USGMII is a derivative of USGMII, that uses a specific formatting for
the control word. The layout is close to the USXGMII control word, but
doesn't support speeds over 1Gbps. Use a dedicated decoding logic for
the USGMII control word, re-using USXGMII definitions but only considering
10/100/1000Mbps speeds
Fixes: 5e61fe157a27 ("net: phy: Introduce QUSGMII PHY mode")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Q-USGMII is the quad port version of USGMII, and supports a max speed of
1Gbps on each line. Make so that phylink_interface_max_speed() reports
this information correctly.
Fixes: ae0e4bb2a0e0 ("net: phylink: Adjust link settings based on rate matching")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
[BUG]
Syzbot reports a reproducible ASSERT() when using rescue=usebackuproot
mount option on a corrupted fs.
The full report can be found here:
https://syzkaller.appspot.com/bug?extid=c4614eae20a166c25bf0
BTRFS error (device loop0: state C): failed to load root csum
assertion failed: !tmp, in fs/btrfs/disk-io.c:1103
------------[ cut here ]------------
kernel BUG at fs/btrfs/ctree.h:3664!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 3608 Comm: syz-executor356 Not tainted 6.0.0-rc7-syzkaller-00029-g3800a713b607 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022
RIP: 0010:assertfail+0x1a/0x1c fs/btrfs/ctree.h:3663
RSP: 0018:ffffc90003aaf250 EFLAGS: 00010246
RAX: 0000000000000032 RBX: 0000000000000000 RCX: f21c13f886638400
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: ffff888021c640a0 R08: ffffffff816bd38d R09: ffffed10173667f1
R10: ffffed10173667f1 R11: 1ffff110173667f0 R12: dffffc0000000000
R13: ffff8880229c21f7 R14: ffff888021c64060 R15: ffff8880226c0000
FS: 0000555556a73300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055a2637d7a00 CR3: 00000000709c4000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
btrfs_global_root_insert+0x1a7/0x1b0 fs/btrfs/disk-io.c:1103
load_global_roots_objectid+0x482/0x8c0 fs/btrfs/disk-io.c:2467
load_global_roots fs/btrfs/disk-io.c:2501 [inline]
btrfs_read_roots fs/btrfs/disk-io.c:2528 [inline]
init_tree_roots+0xccb/0x203c fs/btrfs/disk-io.c:2939
open_ctree+0x1e53/0x33df fs/btrfs/disk-io.c:3574
btrfs_fill_super+0x1c6/0x2d0 fs/btrfs/super.c:1456
btrfs_mount_root+0x885/0x9a0 fs/btrfs/super.c:1824
legacy_get_tree+0xea/0x180 fs/fs_context.c:610
vfs_get_tree+0x88/0x270 fs/super.c:1530
fc_mount fs/namespace.c:1043 [inline]
vfs_kern_mount+0xc9/0x160 fs/namespace.c:1073
btrfs_mount+0x3d3/0xbb0 fs/btrfs/super.c:1884
[CAUSE]
Since the introduction of global roots, we handle
csum/extent/free-space-tree roots as global roots, even if no
extent-tree-v2 feature is enabled.
So for regular csum/extent/fst roots, we load them into
fs_info::global_root_tree rb tree.
And we should not expect any conflicts in that rb tree, thus we have an
ASSERT() inside btrfs_global_root_insert().
But rescue=usebackuproot can break the assumption, as we will try to
load those trees again and again as long as we have bad roots and have
backup roots slot remaining.
So in that case we can have conflicting roots in the rb tree, and
triggering the ASSERT() crash.
[FIX]
We can safely remove that ASSERT(), as the caller will properly put the
offending root.
To make further debugging easier, also add two explicit error messages:
- Error message for conflicting global roots
- Error message when using backup roots slot
Reported-by: syzbot+a694851c6ab28cbcfb9c@syzkaller.appspotmail.com
Fixes: abed4aaae4f7 ("btrfs: track the csum, extent, and free space trees in a rb tree")
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"19 hotfixes. 14 are cc:stable and the remainder address issues which
were introduced during this development cycle or which were considered
inappropriate for a backport"
* tag 'mm-hotfixes-stable-2023-06-12-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
zswap: do not shrink if cgroup may not zswap
page cache: fix page_cache_next/prev_miss off by one
ocfs2: check new file size on fallocate call
mailmap: add entry for John Keeping
mm/damon/core: fix divide error in damon_nr_accesses_to_accesses_bp()
epoll: ep_autoremove_wake_function should use list_del_init_careful
mm/gup_test: fix ioctl fail for compat task
nilfs2: reject devices with insufficient block count
ocfs2: fix use-after-free when unmounting read-only filesystem
lib/test_vmalloc.c: avoid garbage in page array
nilfs2: fix possible out-of-bounds segment allocation in resize ioctl
riscv/purgatory: remove PGO flags
powerpc/purgatory: remove PGO flags
x86/purgatory: remove PGO flags
kexec: support purgatories with .text.hot sections
mm/uffd: allow vma to merge as much as possible
mm/uffd: fix vma operation where start addr cuts part of vma
radix-tree: move declarations to header
nilfs2: fix incomplete buffer cleanup in nilfs_btnode_abort_change_key()
|
|
Commit 619104ba453ad0 ("btrfs: move common NOCOW checks against a file
extent into a helper") changed our call to btrfs_cross_ref_exist() to
always pass false for the 'strict' parameter. We're passing this down
through the stack so that we can do a full check for cross references
during swapfile activation.
With strict always false, this test fails:
btrfs subvol create swappy
chattr +C swappy
fallocate -l1G swappy/swapfile
chmod 600 swappy/swapfile
mkswap swappy/swapfile
btrfs subvol snap swappy swapsnap
btrfs subvol del -C swapsnap
btrfs fi sync /
sync;sync;sync
swapon swappy/swapfile
The fix is to just use args->strict, and everyone except swapfile
activation is passing false.
Fixes: 619104ba453ad0 ("btrfs: move common NOCOW checks against a file extent into a helper")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
can_nocow_extent can reduce the len passed in, which needs to be
propagated to btrfs_dio_iomap_begin so that iomap does not submit
more data then is mapped.
This problems exists since the btrfs_get_blocks_direct helper was added
in commit c5794e51784a ("btrfs: Factor out write portion of
btrfs_get_blocks_direct"), but the ordered_extent splitting added in
commit b73a6fd1b1ef ("btrfs: split partial dio bios before submit")
added a WARN_ON that made a syzkaller test fail.
Reported-by: syzbot+ee90502d5c8fd1d0dd93@syzkaller.appspotmail.com
Fixes: c5794e51784a ("btrfs: Factor out write portion of btrfs_get_blocks_direct")
CC: stable@vger.kernel.org # 6.1+
Tested-by: syzbot+ee90502d5c8fd1d0dd93@syzkaller.appspotmail.com
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add error handling into igb_set_eeprom() function, in case
nvm.ops.read() fails just quit with error code asap.
Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Guarantee that when probe() is run again, PTM and PCI busmaster will be
in the same state as it was if the driver was never loaded.
Avoid an i225/i226 hardware issue that PTM requests can be made even
though PCI bus mastering is not enabled. These unexpected PTM requests
can crash some systems.
So, "force" disable PTM and busmastering before removing the driver,
so they can be re-enabled in the right order during probe(). This is
more like a workaround and should be applicable for i225 and i226, in
any platform.
Fixes: 1b5d73fb8624 ("igc: Enable PCIe PTM")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
There could be a race condition during link down where interrupt
being generated and igc_clean_tx_irq() been called to perform the
TX completion. Properly clear the TX buffer/descriptor ring and
disable the TX Queue ring in igc_free_tx_resources() to avoid that.
Kernel trace:
[ 108.237177] Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP, BIOS TGLIFUI1.R00.4204.A00.2105270302 05/27/2021
[ 108.237178] RIP: 0010:refcount_warn_saturate+0x55/0x110
[ 108.242143] RSP: 0018:ffff9e7980003db0 EFLAGS: 00010286
[ 108.245555] Code: 84 bc 00 00 00 c3 cc cc cc cc 85 f6 74 46 80 3d 20 8c 4d 01 00 75 ee 48 c7 c7 88 f4 03 ab c6 05 10 8c 4d 01 01 e8 0b 10 96 ff <0f> 0b c3 cc cc cc cc 80 3d fc 8b 4d 01 00 75 cb 48 c7 c7 b0 f4 03
[ 108.250434]
[ 108.250434] RSP: 0018:ffff9e798125f910 EFLAGS: 00010286
[ 108.254358] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 108.259325]
[ 108.259325] RAX: 0000000000000000 RBX: ffff8ddb935b8000 RCX: 0000000000000027
[ 108.261868] RDX: ffff8de250a28800 RSI: ffff8de250a1c580 RDI: ffff8de250a1c580
[ 108.265538] RDX: 0000000000000027 RSI: 0000000000000002 RDI: ffff8de250a9c588
[ 108.265539] RBP: ffff8ddb935b8000 R08: ffffffffab2655a0 R09: ffff9e798125f898
[ 108.267914] RBP: ffff8ddb8a5b8d80 R08: 0000005648eba354 R09: 0000000000000000
[ 108.270196] R10: 0000000000000001 R11: 000000002d2d2d2d R12: ffff9e798125f948
[ 108.270197] R13: ffff9e798125fa1c R14: ffff8ddb8a5b8d80 R15: 7fffffffffffffff
[ 108.273001] R10: 000000002d2d2d2d R11: 000000002d2d2d2d R12: ffff8ddb8a5b8ed4
[ 108.276410] FS: 00007f605851b740(0000) GS:ffff8de250a80000(0000) knlGS:0000000000000000
[ 108.280597] R13: 00000000000002ac R14: 00000000ffffff99 R15: ffff8ddb92561b80
[ 108.282966] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 108.282967] CR2: 00007f053c039248 CR3: 0000000185850003 CR4: 0000000000f70ee0
[ 108.286206] FS: 0000000000000000(0000) GS:ffff8de250a00000(0000) knlGS:0000000000000000
[ 108.289701] PKRU: 55555554
[ 108.289702] Call Trace:
[ 108.289704] <TASK>
[ 108.293977] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 108.297562] sock_alloc_send_pskb+0x20c/0x240
[ 108.301494] CR2: 00007f053c03a168 CR3: 0000000184394002 CR4: 0000000000f70ef0
[ 108.301495] PKRU: 55555554
[ 108.306464] __ip_append_data.isra.0+0x96f/0x1040
[ 108.309441] Call Trace:
[ 108.309443] ? __pfx_ip_generic_getfrag+0x10/0x10
[ 108.314927] <IRQ>
[ 108.314928] sock_wfree+0x1c7/0x1d0
[ 108.318078] ? __pfx_ip_generic_getfrag+0x10/0x10
[ 108.320276] skb_release_head_state+0x32/0x90
[ 108.324812] ip_make_skb+0xf6/0x130
[ 108.327188] skb_release_all+0x16/0x40
[ 108.330775] ? udp_sendmsg+0x9f3/0xcb0
[ 108.332626] napi_consume_skb+0x48/0xf0
[ 108.334134] ? xfrm_lookup_route+0x23/0xb0
[ 108.344285] igc_poll+0x787/0x1620 [igc]
[ 108.346659] udp_sendmsg+0x9f3/0xcb0
[ 108.360010] ? ttwu_do_activate+0x40/0x220
[ 108.365237] ? __pfx_ip_generic_getfrag+0x10/0x10
[ 108.366744] ? try_to_wake_up+0x289/0x5e0
[ 108.376987] ? sock_sendmsg+0x81/0x90
[ 108.395698] ? __pfx_process_timeout+0x10/0x10
[ 108.395701] sock_sendmsg+0x81/0x90
[ 108.409052] __napi_poll+0x29/0x1c0
[ 108.414279] ____sys_sendmsg+0x284/0x310
[ 108.419507] net_rx_action+0x257/0x2d0
[ 108.438216] ___sys_sendmsg+0x7c/0xc0
[ 108.439723] __do_softirq+0xc1/0x2a8
[ 108.444950] ? finish_task_switch+0xb4/0x2f0
[ 108.452077] irq_exit_rcu+0xa9/0xd0
[ 108.453584] ? __schedule+0x372/0xd00
[ 108.460713] common_interrupt+0x84/0xa0
[ 108.467840] ? clockevents_program_event+0x95/0x100
[ 108.474968] </IRQ>
[ 108.482096] ? do_nanosleep+0x88/0x130
[ 108.489224] <TASK>
[ 108.489225] asm_common_interrupt+0x26/0x40
[ 108.496353] ? __rseq_handle_notify_resume+0xa9/0x4f0
[ 108.503478] RIP: 0010:cpu_idle_poll+0x2c/0x100
[ 108.510607] __sys_sendmsg+0x5d/0xb0
[ 108.518687] Code: 05 e1 d9 c8 00 65 8b 15 de 64 85 55 85 c0 7f 57 e8 b9 ef ff ff fb 65 48 8b 1c 25 00 cc 02 00 48 8b 03 a8 08 74 0b eb 1c f3 90 <48> 8b 03 a8 08 75 13 8b 05 77 63 cd 00 85 c0 75 ed e8 ce ec ff ff
[ 108.525817] do_syscall_64+0x44/0xa0
[ 108.531563] RSP: 0018:ffffffffab203e70 EFLAGS: 00000202
[ 108.538693] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 108.546775]
[ 108.546777] RIP: 0033:0x7f605862b7f7
[ 108.549495] RAX: 0000000000000001 RBX: ffffffffab20c940 RCX: 000000000000003b
[ 108.551955] Code: 0e 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
[ 108.554068] RDX: 4000000000000000 RSI: 000000002da97f6a RDI: 00000000002b8ff4
[ 108.559816] RSP: 002b:00007ffc99264058 EFLAGS: 00000246
[ 108.564178] RBP: 0000000000000000 R08: 00000000002b8ff4 R09: ffff8ddb01554c80
[ 108.571302] ORIG_RAX: 000000000000002e
[ 108.571303] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f605862b7f7
[ 108.574023] R10: 000000000000015b R11: 000000000000000f R12: ffffffffab20c940
[ 108.574024] R13: 0000000000000000 R14: ffff8de26fbeef40 R15: ffffffffab20c940
[ 108.578727] RDX: 0000000000000000 RSI: 00007ffc992640a0 RDI: 0000000000000003
[ 108.578728] RBP: 00007ffc99264110 R08: 0000000000000000 R09: 175f48ad1c3a9c00
[ 108.581187] do_idle+0x62/0x230
[ 108.585890] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffc992642d8
[ 108.585891] R13: 00005577814ab2ba R14: 00005577814addf0 R15: 00007f605876d000
[ 108.587920] cpu_startup_entry+0x1d/0x20
[ 108.591422] </TASK>
[ 108.596127] rest_init+0xc5/0xd0
[ 108.600490] ---[ end trace 0000000000000000 ]---
Test Setup:
DUT:
- Change mac address on DUT Side. Ensure NIC not having same MAC Address
- Running udp_tai on DUT side. Let udp_tai running throughout the test
Example:
./udp_tai -i enp170s0 -P 100000 -p 90 -c 1 -t 0 -u 30004
Host:
- Perform link up/down every 5 second.
Result:
Kernel panic will happen on DUT Side.
Fixes: 13b5b7fd6a4a ("igc: Add support for Tx/Rx rings")
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Before the patch [1], the clock probe was done directly in the
clk-mt8365 driver. In this probe function, the array which stores the
data clocks is sized using the higher defined numbers (*_NR_CLOCK) in
the clock lists [2]. Currently, with the patch [1], the specific
clk-mt8365 probe function is replaced by the mtk generic one [3], which
size the clock data array by adding all the clock descriptor array size
provided by the clk-mt8365 driver.
Actually, all clock indexes come from the header file [2], that mean, if
there are more clock (then more index) in the header file [2] than the
number of clock declared in the clock descriptor arrays (which is the
case currently), the clock data array will be undersized and then the
generic probe function will overflow when it will try to write in
"clk_data[CLK_INDEX]". Actually, instead of crashing at boot, the probe
function returns an error in the log which looks like:
"of_clk_hw_onecell_get: invalid index 135", then this clock isn't
enabled.
Solve this issue by adding in the driver the missing clocks declared in
the header clock file [2].
[1]: Commit ffe91cb28f6a ("clk: mediatek: mt8365: Convert to
mtk_clk_simple_{probe,remove}()")
[2]: include/dt-bindings/clock/mediatek,mt8365-clk.h
[3]: drivers/clk/mediatek/clk-mtk.c
Fixes: ffe91cb28f6a ("clk: mediatek: mt8365: Convert to mtk_clk_simple_{probe,remove}()")
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230517-fix-clk-index-v3-1-be4df46065c4@baylibre.com
Tested-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Before storing a page, zswap first checks if the number of stored pages
exceeds the limit specified by memory.zswap.max, for each cgroup in the
hierarchy. If this limit is reached or exceeded, then zswap shrinking is
triggered and short-circuits the store attempt.
However, since the zswap's LRU is not memcg-aware, this can create the
following pathological behavior: the cgroup whose zswap limit is 0 will
evict pages from other cgroups continually, without lowering its own zswap
usage. This means the shrinking will continue until the need for swap
ceases or the pool becomes empty.
As a result of this, we observe a disproportionate amount of zswap
writeback and a perpetually small zswap pool in our experiments, even
though the pool limit is never hit.
More generally, a cgroup might unnecessarily evict pages from other
cgroups before we drive the memcg back below its limit.
This patch fixes the issue by rejecting zswap store attempt without
shrinking the pool when obj_cgroup_may_zswap() returns false.
[akpm@linux-foundation.org: fix return of unintialized value]
[akpm@linux-foundation.org: s/ENOSPC/ENOMEM/]
Link: https://lkml.kernel.org/r/20230530222440.2777700-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20230530232435.3097106-1-nphamcs@gmail.com
Fixes: f4840ccfca25 ("zswap: memcg accounting")
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Ackerley Tng reported an issue with hugetlbfs fallocate here[1]. The
issue showed up after the conversion of hugetlb page cache lookup code to
use page_cache_next_miss. Code in hugetlb fallocate, userfaultfd and GUP
is now using page_cache_next_miss to determine if a page is present the
page cache. The following statement is used.
present = page_cache_next_miss(mapping, index, 1) != index;
There are two issues with page_cache_next_miss when used in this way.
1) If the passed value for index is equal to the 'wrap-around' value,
the same index will always be returned. This wrap-around value is 0,
so 0 will be returned even if page is present at index 0.
2) If there is no gap in the range passed, the last index in the range
will be returned. When passed a range of 1 as above, the passed
index value will be returned even if the page is present.
The end result is the statement above will NEVER indicate a page is
present in the cache, even if it is.
As noted by Ackerley in [1], users can see this by hugetlb fallocate
incorrectly returning EEXIST if pages are already present in the file. In
addition, hugetlb pages will not be included in core dumps if they need to
be brought in via GUP. userfaultfd UFFDIO_COPY also uses this code and
will not notice pages already present in the cache. It may try to
allocate a new page and potentially return ENOMEM as opposed to EEXIST.
Both page_cache_next_miss and page_cache_prev_miss have similar issues.
Fix by:
- Check for index equal to 'wrap-around' value and do not exit early.
- If no gap is found in range, return index outside range.
- Update function description to say 'wrap-around' value could be
returned if passed as index.
[1] https://lore.kernel.org/linux-mm/cover.1683069252.git.ackerleytng@google.com/
Link: https://lkml.kernel.org/r/20230602225747.103865-2-mike.kravetz@oracle.com
Fixes: d0ce0e47b323 ("mm/hugetlb: convert hugetlb fault paths to use alloc_hugetlb_folio()")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When changing a file size with fallocate() the new size isn't being
checked. In particular, the FSIZE ulimit isn't being checked, which makes
fstest generic/228 fail. Simply adding a call to inode_newsize_ok() fixes
this issue.
Link: https://lkml.kernel.org/r/20230529152645.32680-1-lhenriques@suse.de
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Mark Fasheh <mark@fasheh.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Map my corporate address to my personal one, as I am leaving the
company.
Link: https://lkml.kernel.org/r/20230531144839.1157112-1-john@keeping.me.uk
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If 'aggr_interval' is smaller than 'sample_interval', max_nr_accesses in
damon_nr_accesses_to_accesses_bp() becomes zero which leads to divide
error, let's validate the values of them in damon_set_attrs() to fix it,
which similar to others attrs check.
Link: https://lkml.kernel.org/r/20230527032101.167788-1-wangkefeng.wang@huawei.com
Fixes: 2f5bef5a590b ("mm/damon/core: update monitoring results for new monitoring attributes")
Reported-by: syzbot+841a46899768ec7bec67@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=841a46899768ec7bec67
Link: https://lore.kernel.org/damon/00000000000055fc4e05fc975bc2@google.com/
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
autoremove_wake_function uses list_del_init_careful, so should epoll's
more aggressive variant. It only doesn't because it was copied from an
older wait.c rather than the most recent.
[bsegall@google.com: add comment]
Link: https://lkml.kernel.org/r/xm26bki0ulsr.fsf_-_@google.com
Link: https://lkml.kernel.org/r/xm26pm6hvfer.fsf@google.com
Fixes: a16ceb139610 ("epoll: autoremove wakers even more aggressively")
Signed-off-by: Ben Segall <bsegall@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When tools/testing/selftests/mm/gup_test.c is compiled as 32bit, then run
on arm64 kernel, it reports "ioctl: Inappropriate ioctl for device".
Fix it by filling compat_ioctl in gup_test_fops
Link: https://lkml.kernel.org/r/20230526022125.175728-1-haibo.li@mediatek.com
Signed-off-by: Haibo Li <haibo.li@mediatek.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
