summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-06-06wifi: mac80211: don't translate beacon/presp addrsJohannes Berg
Don't do link address translation for beacons and probe responses, this leads to reporting multiple scan list entries for the same AP (one with the MLD address) which just breaks things. We might need to extend this in the future for some other (action) frames that aren't MLD addressed. Fixes: 42fb9148c078 ("wifi: mac80211: do link->MLD address translation on RX") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230604120651.62adead1b43a.Ifc25eed26ebf3b269f60b1ec10060156d0e7ec0d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-06wifi: mac80211: mlme: fix non-inheritence elementJohannes Berg
There were two bugs when creating the non-inheritence element: 1) 'at_extension' needs to be declared outside the loop, otherwise the value resets every iteration and we can never really switch properly 2) 'added' never got set to true, so we always cut off the extension element again at the end of the function This shows another issue that we might add a list but no extension list, but we need to make the extension list a zero-length one in that case. Fix all these issues. While at it, add a comment explaining the trim. Fixes: 81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230604120651.3addaa5c4782.If3a78f9305997ad7ef4ba7ffc17a8234c956f613@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-06wifi: cfg80211: reject bad AP MLD addressJohannes Berg
When trying to authenticate, if the AP MLD address isn't a valid address, mac80211 can throw a warning. Avoid that by rejecting such addresses. Fixes: d648c23024bd ("wifi: nl80211: support MLO in auth/assoc") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230604120651.89188912bd1d.I8dbc6c8ee0cb766138803eec59508ef4ce477709@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-06wifi: mac80211: use correct iftype HE capJohannes Berg
We already check that the right iftype capa exists, but then don't use it. Assign it to a variable so we can actually use it, and then do that. Fixes: bac2fd3d7534 ("mac80211: remove use of ieee80211_get_he_sta_cap()") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230604120651.0e908e5c5fdd.Iac142549a6144ac949ebd116b921a59ae5282735@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-06rbd: get snapshot context after exclusive lock is ensured to be heldIlya Dryomov
Move capturing the snapshot context into the image request state machine, after exclusive lock is ensured to be held for the duration of dealing with the image request. This is needed to ensure correctness of fast-diff states (OBJECT_EXISTS vs OBJECT_EXISTS_CLEAN) and object deltas computed based off of them. Otherwise the object map that is forked for the snapshot isn't guaranteed to accurately reflect the contents of the snapshot when the snapshot is taken under I/O. This breaks differential backup and snapshot-based mirroring use cases with fast-diff enabled: since some object deltas may be incomplete, the destination image may get corrupted. Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/61472 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2023-06-06rbd: move RBD_OBJ_FLAG_COPYUP_ENABLED flag settingIlya Dryomov
Move RBD_OBJ_FLAG_COPYUP_ENABLED flag setting into the object request state machine to allow for the snapshot context to be captured in the image request state machine rather than in rbd_queue_workfn(). Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2023-06-06ALSA: ice1712,ice1724: fix the kcontrol->id initializationJaroslav Kysela
The new xarray lookup code requires to know complete kcontrol->id before snd_ctl_add() call. Reorder the code to make the initialization properly. Cc: stable@kernel.org # v5.19+ Reported-by: Martin Zidek <zidek@master.cz> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20230606073122.597491-1-perex@perex.cz Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-06-05Bluetooth: L2CAP: Add missing checks for invalid DCIDSungwoo Kim
When receiving a connect response we should make sure that the DCID is within the valid range and that we don't already have another channel allocated for the same DCID. Missing checks may violate the specification (BLUETOOTH CORE SPECIFICATION Version 5.4 | Vol 3, Part A, Page 1046). Fixes: 40624183c202 ("Bluetooth: L2CAP: Add missing checks for invalid LE DCID") Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-05Bluetooth: ISO: use correct CIS order in Set CIG Parameters eventPauli Virtanen
The order of CIS handle array in Set CIG Parameters response shall match the order of the CIS_ID array in the command (Core v5.3 Vol 4 Part E Sec 7.8.97). We send CIS_IDs mainly in the order of increasing CIS_ID (but with "last" CIS first if it has fixed CIG_ID). In handling of the reply, we currently assume this is also the same as the order of hci_conn in hdev->conn_hash, but that is not true. Match the correct hci_conn to the correct handle by matching them based on the CIG+CIS combination. The CIG+CIS combination shall be unique for ISO_LINK hci_conn at state >= BT_BOUND, which we maintain in hci_le_set_cig_params. Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-05Bluetooth: ISO: don't try to remove CIG if there are bound CIS leftPauli Virtanen
Consider existing BOUND & CONNECT state CIS to block CIG removal. Otherwise, under suitable timing conditions we may attempt to remove CIG while Create CIS is pending, which fails. Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-05Bluetooth: Fix l2cap_disconnect_req deadlockYing Hsu
L2CAP assumes that the locks conn->chan_lock and chan->lock are acquired in the order conn->chan_lock, chan->lock to avoid potential deadlock. For example, l2sock_shutdown acquires these locks in the order: mutex_lock(&conn->chan_lock) l2cap_chan_lock(chan) However, l2cap_disconnect_req acquires chan->lock in l2cap_get_chan_by_scid first and then acquires conn->chan_lock before calling l2cap_chan_del. This means that these locks are acquired in unexpected order, which leads to potential deadlock: l2cap_chan_lock(c) mutex_lock(&conn->chan_lock) This patch releases chan->lock before acquiring the conn_chan_lock to avoid the potential deadlock. Fixes: a2a9339e1c9d ("Bluetooth: L2CAP: Fix use-after-free in l2cap_disconnect_{req,rsp}") Signed-off-by: Ying Hsu <yinghsu@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-05Bluetooth: hci_qca: fix debugfs registrationJohan Hovold
Since commit 3e4be65eb82c ("Bluetooth: hci_qca: Add poweroff support during hci down for wcn3990"), the setup callback which registers the debugfs interface can be called multiple times. This specifically leads to the following error when powering on the controller: debugfs: Directory 'ibs' with parent 'hci0' already present! Add a driver flag to avoid trying to register the debugfs interface more than once. Fixes: 3e4be65eb82c ("Bluetooth: hci_qca: Add poweroff support during hci down for wcn3990") Cc: stable@vger.kernel.org # 4.20 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-05Bluetooth: fix debugfs registrationJohan Hovold
Since commit ec6cef9cd98d ("Bluetooth: Fix SMP channel registration for unconfigured controllers") the debugfs interface for unconfigured controllers will be created when the controller is configured. There is however currently nothing preventing a controller from being configured multiple time (e.g. setting the device address using btmgmt) which results in failed attempts to register the already registered debugfs entries: debugfs: File 'features' in directory 'hci0' already present! debugfs: File 'manufacturer' in directory 'hci0' already present! debugfs: File 'hci_version' in directory 'hci0' already present! ... debugfs: File 'quirk_simultaneous_discovery' in directory 'hci0' already present! Add a controller flag to avoid trying to register the debugfs interface more than once. Fixes: ec6cef9cd98d ("Bluetooth: Fix SMP channel registration for unconfigured controllers") Cc: stable@vger.kernel.org # 4.0 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-05Bluetooth: hci_sync: add lock to protect HCI_UNREGISTERZhengping Jiang
When the HCI_UNREGISTER flag is set, no jobs should be scheduled. Fix potential race when HCI_UNREGISTER is set after the flag is tested in hci_cmd_sync_queue. Fixes: 0b94f2651f56 ("Bluetooth: hci_sync: Fix queuing commands when HCI_UNREGISTER is set") Signed-off-by: Zhengping Jiang <jiangzp@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-05Bluetooth: Fix use-after-free in hci_remove_ltk/hci_remove_irkLuiz Augusto von Dentz
Similar to commit 0f7d9b31ce7a ("netfilter: nf_tables: fix use-after-free in nft_set_catchall_destroy()"). We can not access k after kfree_rcu() call. Cc: stable@vger.kernel.org Signed-off-by: Min Li <lm0963hack@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-05Bluetooth: ISO: Fix CIG auto-allocation to select configurable CIGPauli Virtanen
Make CIG auto-allocation to select the first CIG_ID that is still configurable. Also use correct CIG_ID range (see Core v5.3 Vol 4 Part E Sec 7.8.97 p.2553). Previously, it would always select CIG_ID 0 regardless of anything, because cis_list with data.cis == 0xff (BT_ISO_QOS_CIS_UNSET) would not count any CIS. Since we are not adding CIS here, use find_cis instead. Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-05Bluetooth: ISO: consider right CIS when removing CIG at cleanupPauli Virtanen
When looking for CIS blocking CIG removal, consider only the CIS with the right CIG ID. Don't try to remove CIG with unset CIG ID. Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-05cgroup: Documentation: Clarify usage of memory limitsDan Schatzberg
The existing documentation refers to memory.high as the "main mechanism to control memory usage." This seems incorrect to me - memory.high can result in reclaim pressure which simply leads to stalls unless some external component observes and actions on it (e.g. systemd-oomd can be used for this purpose). While this is feasible, users are unaware of this interaction and are led to believe that memory.high alone is an effective mechanism for limiting memory. The documentation should recommend the use of memory.max as the effective way to enforce memory limits - it triggers reclaim and results in OOM kills by itself. Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Chris Down <chris@chrisdown.name> Signed-off-by: Tejun Heo <tj@kernel.org>
2023-06-05null_blk: Fix: memory release when memory_backed=1Nitesh Shetty
Memory/pages are not freed, when unloading nullblk driver. Steps to reproduce issue 1.free -h total used free shared buff/cache available Mem: 7.8Gi 260Mi 7.1Gi 3.0Mi 395Mi 7.3Gi Swap: 0B 0B 0B 2.modprobe null_blk memory_backed=1 3.dd if=/dev/urandom of=/dev/nullb0 oflag=direct bs=1M count=1000 4.modprobe -r null_blk 5.free -h total used free shared buff/cache available Mem: 7.8Gi 1.2Gi 6.1Gi 3.0Mi 398Mi 6.3Gi Swap: 0B 0B 0B Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> Link: https://lore.kernel.org/r/20230605062354.24785-1-nj.shetty@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-05bpf: netfilter: Add BPF_NETFILTER bpf_attach_typeFlorian Westphal
Andrii Nakryiko writes: And we currently don't have an attach type for NETLINK BPF link. Thankfully it's not too late to add it. I see that link_create() in kernel/bpf/syscall.c just bypasses attach_type check. We shouldn't have done that. Instead we need to add BPF_NETLINK attach type to enum bpf_attach_type. And wire all that properly throughout the kernel and libbpf itself. This adds BPF_NETFILTER and uses it. This breaks uabi but this wasn't in any non-rc release yet, so it should be fine. v2: check link_attack prog type in link_create too Fixes: 84601d6ee68a ("bpf: add bpf_link support for BPF_NETFILTER programs") Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/CAEf4BzZ69YgrQW7DHCJUT_X+GqMq_ZQQPBwopaJJVGFD5=d5Vg@mail.gmail.com/ Link: https://lore.kernel.org/bpf/20230605131445.32016-1-fw@strlen.de
2023-06-05HID: hidpp: terminate retry loop on successBenjamin Tissoires
It seems we forgot the normal case to terminate the retry loop, making us asking 3 times each command, which is probably a little bit too much. And remove the ugly "goto exit" that can be replaced by a simpler "break" Fixes: 586e8fede795 ("HID: logitech-hidpp: Retry commands when device is busy") Suggested-by: Mark Lord <mlord@pobox.com> Tested-by: Mark Lord <mlord@pobox.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-06-05btrfs: subpage: fix a crash in metadata repair pathQu Wenruo
[BUG] Test case btrfs/027 would crash with subpage (64K page size, 4K sectorsize) with the following dying messages: debug: map_length=16384 length=65536 type=metadata|raid6(0x104) assertion failed: map_length >= length, in fs/btrfs/volumes.c:8093 ------------[ cut here ]------------ kernel BUG at fs/btrfs/messages.c:259! Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 Call trace: btrfs_assertfail+0x28/0x2c [btrfs] btrfs_map_repair_block+0x150/0x2b8 [btrfs] btrfs_repair_io_failure+0xd4/0x31c [btrfs] btrfs_read_extent_buffer+0x150/0x16c [btrfs] read_tree_block+0x38/0xbc [btrfs] read_tree_root_path+0xfc/0x1bc [btrfs] btrfs_get_root_ref.part.0+0xd4/0x3a8 [btrfs] open_ctree+0xa30/0x172c [btrfs] btrfs_mount_root+0x3c4/0x4a4 [btrfs] legacy_get_tree+0x30/0x60 vfs_get_tree+0x28/0xec vfs_kern_mount.part.0+0x90/0xd4 vfs_kern_mount+0x14/0x28 btrfs_mount+0x114/0x418 [btrfs] legacy_get_tree+0x30/0x60 vfs_get_tree+0x28/0xec path_mount+0x3e0/0xb64 __arm64_sys_mount+0x200/0x2d8 invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0x60/0x11c do_el0_svc+0x38/0x98 el0_svc+0x40/0xa8 el0t_64_sync_handler+0xf4/0x120 el0t_64_sync+0x190/0x194 Code: aa0403e2 b0fff060 91010000 959c2024 (d4210000) [CAUSE] In btrfs/027 we test RAID6 with missing devices, in this particular case, we're repairing a metadata at the end of a data stripe. But at btrfs_repair_io_failure(), we always pass a full PAGE for repair, and for subpage case this can cross stripe boundary and lead to the above BUG_ON(). This metadata repair code is always there, since the introduction of subpage support, but this can trigger BUG_ON() after the bio split ability at btrfs_map_bio(). [FIX] Instead of passing the old PAGE_SIZE, we calculate the correct length based on the eb size and page size for both regular and subpage cases. CC: stable@vger.kernel.org # 6.3+ Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-06-05ALSA: hda/realtek: Add quirk for Clevo NS50AUTim Crawford
Fixes headset detection on Clevo NS50AU. Signed-off-by: Tim Crawford <tcrawford@system76.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230605163834.24653-1-tcrawford@system76.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-06-05ALSA: hda/realtek: Add quirks for Asus ROG 2024 laptops using CS35L41Stefan Binding
Add support for Asus ROG 2024 models using CS35L41 SPI with Internal Boost. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230605153308.448550-1-sbinding@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-06-05ARM: dts: Fix erroneous ADS touchscreen polaritiesLinus Walleij
Several device tree files get the polarity of the pendown-gpios wrong: this signal is active low. Fix up all incorrect flags, so that operating systems can rely on the flag being correctly set. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230510105156.1134320-1-linus.walleij@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-05Merge tag 'at91-fixes-6.4' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes AT91 fixes for 6.4 It contains: - fix imbalanced reference counter for ethernet devices; without it system hangs after consecutive suspend/resume cycles; - fix debounce delay property for shutdown controller; the initial DT property is not what the driver expects. * tag 'at91-fixes-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama7g5ek: fix debounce delay property for shdwc ARM: at91: pm: fix imbalanced reference counter for ethernet devices Link: https://lore.kernel.org/r/20230530105930.11621-1-claudiu.beznea@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-05Merge tag 'qcom-arm64-fixes-for-6.4' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm ARM64 DeviceTree fixes for 6.4 Register scheme for SM8550 LLCC is corrected to avoid using the wrong register offsets. SDRAM frequency for misidentified SC7180-lite boards is handled. The datatype for Soundwire interval on SM8550 is corrected. The resource controller on SC8280XP is added to the CPU cluster power-domain to get notified to send cached sleep and wake votes before going entering the lower power states. SA8155P power-domains that differ from what's inherited from the SM8150 DeviceTree are adjusted to make the platform boot again. Remoteproc firmware paths are corrected for Sony Xperia 10 IV. Cache properties are adjusted across a range of platforms, to meet changes in the binding. Panel compatibles are corrected for Xiaomi Mi Pad 5 Pro, to match binding. Invalid dai-cells are dropped from SC7280 devices, to match binding. The incorrect removal of "input-enable" from the LPASS pinctrl node of SC8280XP was reverted, to get dmic pins in the correct state again. The incorrect input-enable property is dropped from a msm8974, mdm9615 and apq8026 to resolve a range of DT validation warnings, incorrectly picked up through the ARM64 tree. * tag 'qcom-arm64-fixes-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: sm8550: Use the correct LLCC register scheme arm64: dts: qcom: sc7180-lite: Fix SDRAM freq for misidentified sc7180-lite boards arm64: dts: qcom: sm8550: use uint16 for Soundwire interval arm64: dts: qcom: Split out SA8155P and use correct RPMh power domains arm64: dts: qcom: sm6375-pdx225: Fix remoteproc firmware paths arm64: dts: qcom: add missing cache properties arm64: dts: qcom: use decimal for cache level arm64: dts: qcom: fix indentation ARM: dts: qcom: msm8974: remove superfluous "input-enable" ARM: dts: qcom: mdm9615: remove superfluous "input-enable" ARM: dts: qcom: apq8026: remove superfluous "input-enable" arm64: dts: qcom: sm8250-xiaomi-elish-csot: fix panel compatible arm64: dts: qcom: sm8250-xiaomi-elish-boe: fix panel compatible arm64: dts: qcom: sc7280-qcard: drop incorrect dai-cells from WCD938x SDW arm64: dts: qcom: sc7280-idp: drop incorrect dai-cells from WCD938x SDW arm64: dts: qcom: sc8280xp: Flush RSC sleep & wake votes arm64: dts: qcom: sc8280xp: Revert "arm64: dts: qcom: sc8280xp: remove superfluous "input-enable"" Link: https://lore.kernel.org/r/20230601142659.2246348-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-05Merge tag 'qcom-driver-fixes-for-6.4' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm driver fixes for 6.4 Error paths is corrected across icc-bwmon, rpmh-rsc, ramp_controller and rmtfs. The ice module is renamed qcom_ice, to avoid clashing with existing "ice" driver. SA8155P-specific RPMh power-domains are introduced to avoid the code trying to access resources that exists on SM8150, but not on SA8155P. Lastly, changes to the EDAC driver to fix an issue where the driver performs mmio based on the wrong register map. * tag 'qcom-driver-fixes-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: EDAC/qcom: Get rid of hardcoded register offsets EDAC/qcom: Remove superfluous return variable assignment in qcom_llcc_core_setup() dt-bindings: cache: qcom,llcc: Fix SM8550 description soc: qcom: rpmhpd: Add SA8155P power domains dt-bindings: power: qcom,rpmpd: Add SA8155P soc: qcom: Rename ice to qcom_ice to avoid module name conflict soc: qcom: rmtfs: Fix error code in probe() soc: qcom: ramp_controller: Fix an error handling path in qcom_ramp_controller_probe() soc: qcom: rpmh-rsc: drop redundant unsigned >=0 comparision soc: qcom: icc-bwmon: fix incorrect error code passed to dev_err_probe() Link: https://lore.kernel.org/r/20230601141058.2246039-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-05Merge tag 'qcom-dts-fixes-for-6.4' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm ARM32 fix for 6.4 A range of 32-bit Qualcomm platforms are missing cache-unified, which is now required by the binding, this is now corrected. * tag 'qcom-dts-fixes-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: add missing cache properties Link: https://lore.kernel.org/r/20230601140347.2245680-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-05Merge tag 'asym-keys-fix-for-linus-v6.4-rc5' of ↵Linus Torvalds
https://github.com/robertosassu/linux Pull asymmetric keys fix from Roberto Sassu: "Here is a small fix to make an unconditional copy of the buffer passed to crypto operations, to take into account the case of the stack not in the linear mapping area. It has been tested and verified to fix the bug" Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: David Howells <dhowells@redhat.com> * tag 'asym-keys-fix-for-linus-v6.4-rc5' of https://github.com/robertosassu/linux: KEYS: asymmetric: Copy sig and digest in public_key_verify_signature()
2023-06-05firmware: cs_dsp: Log correct region name in bin error messagesRichard Fitzgerald
In cs_dsp_load_coeff() region_name should be set in the XM/YM/ZM cases otherwise any errors will log the region as "Unknown". While doing this also change one error message that logged the region type ID to log the region_name instead. This makes it consistent with other messages in the same function. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230605143238.4001982-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-05Merge branch 'mptcp-addr-adv-fixes'David S. Miller
Mat Martineau says: ==================== mptcp: Fixes for address advertisement Patches 1 and 2 allow address advertisements to be removed without affecting current connected subflows, and updates associated self tests. Patches 3 and 4 correctly track (and allow removal of) addresses that were implicitly announced as part of subflow creation. Also updates associated self tests. Patch 5 makes subflow and address announcement counters work consistently between the userspace and in-kernel path managers. ==================== Signed-off-by: Mat Martineau <martineau@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-05mptcp: update userspace pm infosGeliang Tang
Increase pm subflows counter on both server side and client side when userspace pm creates a new subflow, and decrease the counter when it closes a subflow. Increase add_addr_signaled counter in mptcp_nl_cmd_announce() when the address is announced by userspace PM. This modification is similar to how the in-kernel PM is updating the counter: when additional subflows are created/removed. Fixes: 9ab4807c84a4 ("mptcp: netlink: Add MPTCP_PM_CMD_ANNOUNCE") Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/329 Cc: stable@vger.kernel.org Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-05selftests: mptcp: update userspace pm subflow testsGeliang Tang
To align with what is done by the in-kernel PM, update userspace pm subflow selftests, by sending the a remove_addrs command together before the remove_subflows command. This will get a RM_ADDR in chk_rm_nr(). Fixes: d9a4594edabf ("mptcp: netlink: Add MPTCP_PM_CMD_REMOVE") Fixes: 5e986ec46874 ("selftests: mptcp: userspace pm subflow tests") Link: https://github.com/multipath-tcp/mptcp_net-next/issues/379 Cc: stable@vger.kernel.org Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-05mptcp: add address into userspace pm listGeliang Tang
Add the address into userspace_pm_local_addr_list when the subflow is created. Make sure it can be found in mptcp_nl_cmd_remove(). And delete it in the new helper mptcp_userspace_pm_delete_local_addr(). By doing this, the "REMOVE" command also works with subflows that have been created via the "SUB_CREATE" command instead of restricting to the addresses that have been announced via the "ANNOUNCE" command. Fixes: d9a4594edabf ("mptcp: netlink: Add MPTCP_PM_CMD_REMOVE") Link: https://github.com/multipath-tcp/mptcp_net-next/issues/379 Cc: stable@vger.kernel.org Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-05selftests: mptcp: update userspace pm addr testsGeliang Tang
This patch is linked to the previous commit ("mptcp: only send RM_ADDR in nl_cmd_remove"). To align with what is done by the in-kernel PM, update userspace pm addr selftests, by sending a remove_subflows command together after the remove_addrs command. Fixes: d9a4594edabf ("mptcp: netlink: Add MPTCP_PM_CMD_REMOVE") Fixes: 97040cf9806e ("selftests: mptcp: userspace pm address tests") Cc: stable@vger.kernel.org Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-05mptcp: only send RM_ADDR in nl_cmd_removeGeliang Tang
The specifications from [1] about the "REMOVE" command say: Announce that an address has been lost to the peer It was then only supposed to send a RM_ADDR and not trying to delete associated subflows. A new helper mptcp_pm_remove_addrs() is then introduced to do just that, compared to mptcp_pm_remove_addrs_and_subflows() also removing subflows. To delete a subflow, the userspace daemon can use the "SUB_DESTROY" command, see mptcp_nl_cmd_sf_destroy(). Fixes: d9a4594edabf ("mptcp: netlink: Add MPTCP_PM_CMD_REMOVE") Link: https://github.com/multipath-tcp/mptcp/blob/mptcp_v0.96/include/uapi/linux/mptcp.h [1] Cc: stable@vger.kernel.org Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-05drm/i915: Use 18 fast wake AUX sync lenJouni Högander
HW default for wake sync pulses is 18. 10 precharge and 8 preamble. There is no reason to change this especially as it is causing problems with certain eDP panels. v3: Change "Fixes:" commit v2: Remove "fast wake" repeat from subject Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Fixes: e1c71f8f9180 ("drm/i915: Fix fast wake AUX sync len") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8475 Reviewed-by: Luca Coelho <luciano.coelho@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230530101649.2549949-1-jouni.hogander@intel.com (cherry picked from commit b29a20f7c4995a059ed764ce42389857426397c7) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2023-06-05drm/i915/display: Set correct voltage level for 480MHz CDCLKChaitanya Kumar Borah
According to Bspec, the voltage level for 480MHz is to be set as 1 instead of 2. BSpec: 49208 Fixes: 06f1b06dc5b7 ("drm/i915/display: Add 480 MHz CDCLK steps for RPL-U") v2: rebase Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230529060747.3972259-1-chaitanya.kumar.borah@intel.com (cherry picked from commit 5a3c46b809d09f8ef59e2fbf2463b1c102aecbaa) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2023-06-05drm/i915/gt: Use the correct error value when kernel_context() failsAndi Shyti
kernel_context() returns an error pointer. Use pointer-error conversion functions to evaluate its return value, rather than checking for a '0' return. Fixes: eb5c10cbbc2f ("drm/i915: Remove I915_USER_PRIORITY_SHIFT") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> # v5.13+ Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Acked-by: Tejas Upadhyay <tejas.upadhyay@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230526124138.2006110-1-andi.shyti@linux.intel.com (cherry picked from commit edad9ee94f17adc75d3b13ab51bbe3d615ce1e7e) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2023-06-05Merge tag 'thunderbolt-for-v6.4-rc6' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus Mika writes: thunderbolt: Fixes for v6.4-rc6 This includes following fixes for v6.4-rc6: - Fix DMA test driver to pass correct values when only RX or TX ring is used - Increase timeout when DisplayPort tunnel is established to cope with a VGA/DVI dongle connected to a dock - Do not enable CL states when BIOS connnection manager already created the tunnels - Correct the ring interrupt masking to work again in Intel hardware on resume from system sleep states. All these have been in linux-next with no reported issues. * tag 'thunderbolt-for-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: thunderbolt: Mask ring interrupt on Intel hardware as well thunderbolt: Do not touch CL state configuration during discovery thunderbolt: Increase DisplayPort Connection Manager handshake timeout thunderbolt: dma_test: Use correct value for absent rings when creating paths
2023-06-05net: stmmac: dwmac-qcom-ethqos: fix a regression on EMAC < 3Bartosz Golaszewski
We must not assign plat_dat->dwmac4_addrs unconditionally as for structures which don't set them, this will result in the core driver using zeroes everywhere and breaking the driver for older HW. On EMAC < 2 the address should remain NULL. Fixes: b68376191c69 ("net: stmmac: dwmac-qcom-ethqos: Add EMAC3 support") Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-05i2c: mv64xxx: Fix reading invalid status value in atomic modeMarek Behún
There seems to be a bug within the mv64xxx I2C controller, wherein the status register may not necessarily contain valid value immediately after the IFLG flag is set in the control register. My theory is that the controller: - first sets the IFLG in control register - then updates the status register - then raises an interrupt This may sometime cause weird bugs when in atomic mode, since in this mode we do not wait for an interrupt, but instead we poll the control register for IFLG and read status register immediately after. I encountered -ENXIO from mv64xxx_i2c_fsm() due to this issue when using this driver in atomic mode. Note that I've only seen this issue on Armada 385, I don't know whether other SOCs with this controller are also affected. Also note that this fix has been in U-Boot for over 4 years [1] without anybody complaining, so it should not cause regressions. [1] https://source.denx.de/u-boot/u-boot/-/commit/d50e29662f78 Fixes: 544a8d75f3d6 ("i2c: mv64xxx: Add atomic_xfer method to driver") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-05Merge tag 'linux-can-fixes-for-6.4-20230605' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== this is a pull request of 3 patches for net/master. All 3 patches target the j1939 stack. The 1st patch is by Oleksij Rempel and fixes the error queue handling for (E)TP sessions that run into timeouts. The last 2 patches are by Fedor Pchelkin and fix a potential use-after-free in j1939_netdev_start() if j1939_can_rx_register() fails. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-05i2c: designware: fix idx_write_cnt in read loopDavid Zheng
With IC_INTR_RX_FULL slave interrupt handler reads data in a loop until RX FIFO is empty. When testing with the slave-eeprom, each transaction has 2 bytes for address/index and 1 byte for value, the address byte can be written as data byte due to dropping STOP condition. In the test below, the master continuously writes to the slave, first 2 bytes are index, 3rd byte is value and follow by a STOP condition. i2c_write: i2c-3 #0 a=04b f=0000 l=3 [00-D1-D1] i2c_write: i2c-3 #0 a=04b f=0000 l=3 [00-D2-D2] i2c_write: i2c-3 #0 a=04b f=0000 l=3 [00-D3-D3] Upon receiving STOP condition slave eeprom would reset `idx_write_cnt` so next 2 bytes can be treated as buffer index for upcoming transaction. Supposedly the slave eeprom buffer would be written as EEPROM[0x00D1] = 0xD1 EEPROM[0x00D2] = 0xD2 EEPROM[0x00D3] = 0xD3 When CPU load is high the slave irq handler may not read fast enough, the interrupt status can be seen as 0x204 with both DW_IC_INTR_STOP_DET (0x200) and DW_IC_INTR_RX_FULL (0x4) bits. The slave device may see the transactions below. 0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x1594 : INTR_STAT=0x4 0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x1594 : INTR_STAT=0x4 0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x1594 : INTR_STAT=0x4 0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x1794 : INTR_STAT=0x204 0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x1790 : INTR_STAT=0x200 0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x1594 : INTR_STAT=0x4 0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x1594 : INTR_STAT=0x4 0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x1594 : INTR_STAT=0x4 After `D1` is received, read loop continues to read `00` which is the first bype of next index. Since STOP condition is ignored by the loop, eeprom buffer index increased to `D2` and `00` is written as value. So the slave eeprom buffer becomes EEPROM[0x00D1] = 0xD1 EEPROM[0x00D2] = 0x00 EEPROM[0x00D3] = 0xD3 The fix is to use `FIRST_DATA_BYTE` (bit 11) in `IC_DATA_CMD` to split the transactions. The first index byte in this case would have bit 11 set. Check this indication to inject I2C_SLAVE_WRITE_REQUESTED event which will reset `idx_write_cnt` in slave eeprom. Signed-off-by: David Zheng <david.zheng@intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-05net/sched: fq_pie: ensure reasonable TCA_FQ_PIE_QUANTUM valuesEric Dumazet
We got multiple syzbot reports, all duplicates of the following [1] syzbot managed to install fq_pie with a zero TCA_FQ_PIE_QUANTUM, thus triggering infinite loops. Use limits similar to sch_fq, with commits 3725a269815b ("pkt_sched: fq: avoid hang when quantum 0") and d9e15a273306 ("pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM") [1] watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [swapper/0:0] Modules linked in: irq event stamp: 172817 hardirqs last enabled at (172816): [<ffff80001242fde4>] __el1_irq arch/arm64/kernel/entry-common.c:476 [inline] hardirqs last enabled at (172816): [<ffff80001242fde4>] el1_interrupt+0x58/0x68 arch/arm64/kernel/entry-common.c:486 hardirqs last disabled at (172817): [<ffff80001242fdb0>] __el1_irq arch/arm64/kernel/entry-common.c:468 [inline] hardirqs last disabled at (172817): [<ffff80001242fdb0>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:486 softirqs last enabled at (167634): [<ffff800008020c1c>] softirq_handle_end kernel/softirq.c:414 [inline] softirqs last enabled at (167634): [<ffff800008020c1c>] __do_softirq+0xac0/0xd54 kernel/softirq.c:600 softirqs last disabled at (167701): [<ffff80000802a660>] ____do_softirq+0x14/0x20 arch/arm64/kernel/irq.c:80 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0-rc3-syzkaller-geb0f1697d729 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : fq_pie_qdisc_dequeue+0x10c/0x8ac net/sched/sch_fq_pie.c:246 lr : fq_pie_qdisc_dequeue+0xe4/0x8ac net/sched/sch_fq_pie.c:240 sp : ffff800008007210 x29: ffff800008007280 x28: ffff0000c86f7890 x27: ffff0000cb20c2e8 x26: ffff0000cb20c2f0 x25: dfff800000000000 x24: ffff0000cb20c2e0 x23: ffff0000c86f7880 x22: 0000000000000040 x21: 1fffe000190def10 x20: ffff0000cb20c2e0 x19: ffff0000cb20c2e0 x18: ffff800008006e60 x17: 0000000000000000 x16: ffff80000850af6c x15: 0000000000000302 x14: 0000000000000100 x13: 0000000000000000 x12: 0000000000000001 x11: 0000000000000302 x10: 0000000000000100 x9 : 0000000000000000 x8 : 0000000000000000 x7 : ffff80000841c468 x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000001 x3 : 0000000000000000 x2 : ffff0000cb20c2e0 x1 : ffff0000cb20c2e0 x0 : 0000000000000001 Call trace: fq_pie_qdisc_dequeue+0x10c/0x8ac net/sched/sch_fq_pie.c:246 dequeue_skb net/sched/sch_generic.c:292 [inline] qdisc_restart net/sched/sch_generic.c:397 [inline] __qdisc_run+0x1fc/0x231c net/sched/sch_generic.c:415 __dev_xmit_skb net/core/dev.c:3868 [inline] __dev_queue_xmit+0xc80/0x3318 net/core/dev.c:4210 dev_queue_xmit include/linux/netdevice.h:3085 [inline] neigh_connected_output+0x2f8/0x38c net/core/neighbour.c:1581 neigh_output include/net/neighbour.h:544 [inline] ip6_finish_output2+0xd60/0x1a1c net/ipv6/ip6_output.c:134 __ip6_finish_output net/ipv6/ip6_output.c:195 [inline] ip6_finish_output+0x538/0x8c8 net/ipv6/ip6_output.c:206 NF_HOOK_COND include/linux/netfilter.h:292 [inline] ip6_output+0x270/0x594 net/ipv6/ip6_output.c:227 dst_output include/net/dst.h:458 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] ndisc_send_skb+0xc30/0x1790 net/ipv6/ndisc.c:508 ndisc_send_rs+0x47c/0x5d4 net/ipv6/ndisc.c:718 addrconf_rs_timer+0x300/0x58c net/ipv6/addrconf.c:3936 call_timer_fn+0x19c/0x8cc kernel/time/timer.c:1700 expire_timers kernel/time/timer.c:1751 [inline] __run_timers+0x55c/0x734 kernel/time/timer.c:2022 run_timer_softirq+0x7c/0x114 kernel/time/timer.c:2035 __do_softirq+0x2d0/0xd54 kernel/softirq.c:571 ____do_softirq+0x14/0x20 arch/arm64/kernel/irq.c:80 call_on_irq_stack+0x24/0x4c arch/arm64/kernel/entry.S:882 do_softirq_own_stack+0x20/0x2c arch/arm64/kernel/irq.c:85 invoke_softirq kernel/softirq.c:452 [inline] __irq_exit_rcu+0x28c/0x534 kernel/softirq.c:650 irq_exit_rcu+0x14/0x84 kernel/softirq.c:662 __el1_irq arch/arm64/kernel/entry-common.c:472 [inline] el1_interrupt+0x38/0x68 arch/arm64/kernel/entry-common.c:486 el1h_64_irq_handler+0x18/0x24 arch/arm64/kernel/entry-common.c:491 el1h_64_irq+0x64/0x68 arch/arm64/kernel/entry.S:587 __daif_local_irq_enable arch/arm64/include/asm/irqflags.h:33 [inline] arch_local_irq_enable+0x8/0xc arch/arm64/include/asm/irqflags.h:55 cpuidle_idle_call kernel/sched/idle.c:170 [inline] do_idle+0x1f0/0x4e8 kernel/sched/idle.c:282 cpu_startup_entry+0x24/0x28 kernel/sched/idle.c:379 rest_init+0x2dc/0x2f4 init/main.c:735 start_kernel+0x0/0x55c init/main.c:834 start_kernel+0x3f0/0x55c init/main.c:1088 __primary_switched+0xb8/0xc0 arch/arm64/kernel/head.S:523 Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-05i2c: mchp-pci1xxxx: Avoid cast to incompatible function typeSimon Horman
Rather than casting pci1xxxx_i2c_shutdown to an incompatible function type, update the type to match that expected by __devm_add_action. Reported by clang-16 with W-1: .../i2c-mchp-pci1xxxx.c:1159:29: error: cast from 'void (*)(struct pci1xxxx_i2c *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict] ret = devm_add_action(dev, (void (*)(void *))pci1xxxx_i2c_shutdown, i2c); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/linux/device.h:251:29: note: expanded from macro 'devm_add_action' __devm_add_action(release, action, data, #action) ^~~~~~ No functional change intended. Compile tested only. Signed-off-by: Simon Horman <horms@kernel.org> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Reviewed-by: Tharun Kumar P<tharunkumar.pasumarthi@microchip.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-05i2c: img-scb: Fix spelling mistake "innacurate" -> "inaccurate"Christian Heusel
There is a spelling mistake in a comment. Fix it. Signed-off-by: Christian Heusel <christian@heusel.eu> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-05MAINTAINERS: Add myself as I2C host drivers maintainerAndi Shyti
I will help Wolfram out with the i2c controllers patches. Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-05ALSA: hda/realtek: Add "Intel Reference board" and "NUC 13" SSID in the ALC256Sayed, Karimuddin
Add "Intel Reference boad" and "Intel NUC 13" SSID in the alc256. Enable jack headset volume buttons Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Sayed, Karimuddin <karimuddin.sayed@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20230602193812.66768-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit (git 2.34.1) at 2025-07-19 16:44:34 +0000