summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-15mlxsw: core_acl_flex_actions: Work around hardware limitationIdo Schimmel
In the policy engine, each ACL rule points to an action block where the ACL actions are stored. Each action block consists of one or more action sets. Each action set holds one or more individual actions, up to a maximum queried from the device. For example: Action set #1 Action set #2 +----------+ +--------------+ +--------------+ | ACL rule +----------> Action #1 | +-----> Action #4 | +----------+ +--------------+ | +--------------+ | Action #2 | | | Action #5 | +--------------+ | +--------------+ | Action #3 +------+ | | +--------------+ +--------------+ <---------+ Action block +-----------------> The hardware has a limitation that prevents a policing action (MLXSW_AFA_POLCNT_CODE when used with a policer, not a counter) from being configured in the same action set with a trap action (i.e., MLXSW_AFA_TRAP_CODE or MLXSW_AFA_TRAPWU_CODE). Note that the latter used to implement multiple actions: 'trap', 'mirred', 'drop'. Work around this limitation by teaching mlxsw_afa_block_append_action() to create a new action set not only when there is no more room left in the current set, but also when there is a conflict between previously mentioned actions. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15mlxsw: spectrum_policer: Add devlink resource supportIdo Schimmel
Expose via devlink-resource the maximum number of single-rate policers and their current occupancy. Example: $ devlink resource show pci/0000:01:00.0 ... name global_policers size 1000 unit entry dpipe_tables none resources: name single_rate_policers size 968 occ 0 unit entry dpipe_tables none Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15mlxsw: spectrum_policer: Add policer coreIdo Schimmel
Add common code to handle all policer-related functionality in mlxsw. Currently, only policer for policy engines are supported, but it in the future more policer families will be added such as CPU (trap) policers and storm control policers. The API allows different modules to add / delete policers and read their drop counter. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15mlxsw: resources: Add resource identifier for global policersIdo Schimmel
Add a resource identifier for maximum global policers so that it could be later used to query the information from firmware. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15mlxsw: reg: Add policer bandwidth limitsIdo Schimmel
Add policer bandwidth limits for both rate and burst size so that they could be enforced by a later patch. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15hinic: add firmware update supportLuo bin
add support to update firmware by the devlink flashing API Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15decnet: dn_dev: Remove an unnecessary label.Suraj Upadhyay
Remove the unnecessary label from dn_dev_ioctl() and make its error handling simpler to read. Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15docs: networking: timestamping: add section for stacked PHC devicesVladimir Oltean
The concept of timestamping DSA switches / Ethernet PHYs is becoming more and more popular, however the Linux kernel timestamping code has evolved quite organically and there's layers upon layers of new and old code that need to work together for things to behave as expected. Add this chapter to explain what the overall goals are. Loosely based upon this email discussion plus some more info: https://lkml.org/lkml/2020/7/6/481 Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15net: sundance: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15netpoll: Remove unused inline function netpoll_netdev_init()YueHaibing
commit d565b0a1a9b6 ("net: Add Generic Receive Offload infrastructure") left behind this, remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-15mptcp: Remove unused inline function mptcp_rcv_synsent()YueHaibing
commit 263e1201a2c3 ("mptcp: consolidate synack processing.") left behind this, remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-15net: flow: Remove unused inline functionYueHaibing
It is not used since commit 09c7570480f7 ("xfrm: remove flow cache") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-15cipso: Remove unused inline functionsYueHaibing
They are not used any more since commit b1edeb102397 ("netlabel: Replace protocol/NetLabel linking with refrerence counts") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14Merge branch 'udp_tunnel-NIC-RX-port-offload-infrastructure'David S. Miller
Jakub Kicinski says: ==================== udp_tunnel: NIC RX port offload infrastructure This set of patches converts further drivers to use the new infrastructure to UDP tunnel port offload merged in commit 0ea460474d70 ("Merge branch 'udp_tunnel-add-NIC-RX-port-offload-infrastructure'"). v3: - fix a W=1 build warning in qede. v2: - fix a W=1 build warning in xgbe, - expand the size of tables for lio. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14qlcnic: convert to new udp_tunnel_nic infraJakub Kicinski
Straightforward conversion to new infra, 1 VxLAN port, handler may sleep. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14qede: convert to new udp_tunnel_nic infraJakub Kicinski
Covert to new infra. Looks like this driver was not doing ref counting, and sleeping in the callback. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14fm10k: convert to new udp_tunnel_nic infraJakub Kicinski
Straightforward conversion to new infra. Driver restores info after close/open cycle by calling its internal restore function so just use that, no need for udp_tunnel_nic_reset_ntf() here. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14liquidio_vf: convert to new udp_tunnel_nic infraJakub Kicinski
Carbon copy of the previous change. This driver is just a super thin FW interface, but Derek let us know the table has 1024 entries. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14liquidio: convert to new udp_tunnel_nic infraJakub Kicinski
This driver is just a super thin FW interface, but Derek let us know the table has 1024 entries. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14enic: convert to new udp_tunnel_nic infraJakub Kicinski
Convert to new infra, now the refcounting will be correct, and driver gets port replay of other ports when offloaded port gets removed. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14cxgb4: convert to new udp_tunnel_nic infraJakub Kicinski
Convert to new infra, this driver is very simple. The check of adapter->rawf_cnt in cxgb_udp_tunnel_unset_port() is kept from the old port deletion function but it's dodgy since nothing ever updates that member once its set during init. Also .set_port callback always adds the raw mac filter.. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14bnx2x: convert to new udp_tunnel_nic infraJakub Kicinski
Fairly straightforward conversion - no need to keep track of the use count, and replay when ports get removed, also callbacks can just sleep. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14xgbe: convert to new udp_tunnel_nic infraJakub Kicinski
Make use of the new udp_tunnel_nic infra. Don't clear the features when VxLAN port is not present to make all drivers behave the same. Driver will now (until we address the problem in the core) leave the RX UDP tunnel feature always on, since this is what most drivers do. Remove the list of VxLAN ports, just program the one core told us to. The driver seem to want to clear the VxLAN ports on close but it doesn't seem to flush the port list properly so it'd get wrong use counts after close/open. Again since it calls its own open handler we need the reset notification hack. v2: - fix kbuild warning Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14xgbe: switch to more generic VxLAN detectionJakub Kicinski
Instead of looping though the list of ports just check if the geometry of the packet is correct for VxLAN. HW most likely doesn't care about the exact port, anyway, since only first port is actually offloaded, and this way we won't have to maintain the port list at all. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14be2net: convert to new udp_tunnel_nic infraJakub Kicinski
Convert be2net to new udp_tunnel_nic infra. NIC only takes one VxLAN port. Remove the port tracking using a list. The warning in be_work_del_vxlan_port() looked suspicious - like the driver expected ports to be removed in order of addition. be2net unregisters ports when going down and re-registers them (for skyhawk) when coming up, but it never checks if the device is up in the add_port / del_port callbacks. Make it use UDP_TUNNEL_NIC_INFO_OPEN_ONLY. Sadly this driver calls its own open/close functions directly so the udp_tunnel_nic_reset_ntf() workaround is needed. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14nfp: convert to new udp_tunnel_nic infraJakub Kicinski
NFP conversion is pretty straightforward. We want to be able to sleep, and only get callbacks when the device is open. NFP did not ask for port replay when ports were removed, now new infra will provide this feature for free. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-07-14 The following pull-request contains BPF updates for your *net-next* tree. We've added 21 non-merge commits during the last 1 day(s) which contain a total of 20 files changed, 308 insertions(+), 279 deletions(-). The main changes are: 1) Fix selftests/bpf build, from Alexei. 2) Fix resolve_btfids build issues, from Jiri. 3) Pull usermode-driver-cleanup set, from Eric. 4) Two minor fixes to bpfilter, from Alexei and Masahiro. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14ksz884x: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'ksz_alloc_desc()', GFP_KERNEL can be used because a few lines below, GFP_KERNEL is also used in the 'ksz_alloc_soft_desc()' calls. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14Merge branch 'r8169-add-support-for-RTL8125B'David S. Miller
Heiner Kallweit says: ==================== r8169: add support for RTL8125B This series adds support for RTL8125B rev.b. Tested with a Delock 89564 PCIe card. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14r8169: add support for RTL8125BHeiner Kallweit
Add support for RTL8125B rev.b. In my tests 2.5Gbps worked well w/o firmware, however for a stable link at 1Gbps firmware revision 0.0.2 is needed. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14net: phy: realtek: add support for RTL8125B-internal PHYHeiner Kallweit
Realtek assigned a new PHY ID for the RTL8125B-internal PHY. It's however compatible with the RTL8125A-internal PHY. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14Merge branch 's390-qeth-next'David S. Miller
Julian Wiedmann says: ==================== s390/qeth: updates 2020-07-14 please apply the following patch series for qeth to netdev's net-next tree. This brings a mix of cleanups for various parts of the control code. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: constify the MPC initialization dataJulian Wiedmann
We're not modifying these data blobs, so mark them as constant. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: unify RX-mode hashtablesJulian Wiedmann
To keep track of the addresses programmed from an RX modeset, we have two separate hashtables (L2: mac_htable, L3: ip_mc_htable). These are never used at the same time, so unify them into a single rx_mode_addrs hashtable. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: cleanup OAT codeJulian Wiedmann
While initially just trying to fix up the indentation, condense a few lines and get rid of a goto label. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: clean up a magic number in the OAT callbackJulian Wiedmann
Use the correct struct member instead of hardcoding its offset. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: use u64_to_user_ptr() in the OAT codeJulian Wiedmann
Use the correct helper for casting to a user pointer. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: clean up error handling for isolation mode cmdsJulian Wiedmann
As the cmd IO path has learned to propagate errnos back to its callers, let them deal with errors instead of trying to restore their previous configuration from within the IO error path. Also translate the HW error to a meaningful errno, instead of returning -EIO for all cases (and don't map this to -EOPNOTSUPP later on...). While at it, add a READ_ONCE() / WRITE_ONCE() pair to ensure that the data path always sees a valid isolation mode during reconfiguration. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: don't clear the configured isolation modeJulian Wiedmann
When qeth_set_access_ctrl_online() is called during the device's initialization and discovers that isolation mode isn't supported, don't clear the user's currently configured mode. They intentionally choose to operate the device in this specific mode, and degrading the isolation is not an option. Only adjust the configuration when called via sysfs (ie. fallback = 1), and here follow the common pattern and restore it from prev_isolation. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: only init the isolation mode when necessaryJulian Wiedmann
A newly initialized device defaults to ISOLATION_MODE_NONE, don't bother with programming this a second time. Then remove the OSD/OSX check, it's already done in the sysfs path whenever the user actually changes the configuration. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: fine-tune errno when cmds are cancelledJulian Wiedmann
If we cancel all pending cmds (eg. when tearing down the device), don't blame it on an IO error. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: reject unsupported link type earlierJulian Wiedmann
Rather than delaying the decision until netdev setup, immediately reject a device when we discover that it has an unsupported link type (ie. Token Ring). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14Merge branch 'mlxsw-Mirror-to-CPU-preparations'David S. Miller
Ido Schimmel says: ==================== mlxsw: Mirror to CPU preparations A future patch set will add the ability to trap packets that were dropped due to buffer related reasons (e.g., early drop). Internally this is implemented by mirroring these packets towards the CPU port. This patch set adds the required infrastructure to enable such mirroring. Patches #1-#2 extend two registers needed for above mentioned functionality. Patches #3-#6 gradually add support for setting the mirroring target of a SPAN (mirroring) agent as the CPU port. This is only supported from Spectrum-2 onwards, so an error is returned for Spectrum-1. Patches #7-#8 add the ability to set a policer on a SPAN agent. This is required because unlike regularly trapped packets, a policer cannot be set on the trap group with which the mirroring trap is associated. Patches #9-#12 parse the mirror reason field from the Completion Queue Element (CQE). Unlike other trapped packets, the trap identifier of mirrored packets only indicates that the packet was mirrored, but not why. The reason (e.g., tail drop) is encoded in the mirror reason field. Patch #13 utilizes the mirror reason field in order to lookup the matching Rx listener. This allows us to maintain the abstraction that an Rx listener is mapped to a single trap reason. Without taking the mirror reason into account we would need to register a single Rx listener for all mirrored packets. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14mlxsw: core: Use mirror reason during Rx listener lookupIdo Schimmel
The Rx listener abstraction allows the switch driver (e.g., mlxsw_spectrum) to register a function that is called when a packet is received (trapped) for a specific reason. Up until now, the Rx listener lookup was solely based on the trap identifier. However, when a packet is mirrored to the CPU the trap identifier merely indicates that the packet was mirrored, but not why it was mirrored. This makes it impossible for the switch driver to register different Rx listeners for different mirror reasons. Solve this by allowing the switch driver to register a Rx listener with a mirror reason and by extending the Rx listener lookup to take the mirror reason into account. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14mlxsw: pci: Retrieve mirror reason from CQE during receiveIdo Schimmel
In case the mirror reason is valid, retrieve it into the Rx information so that it could be used during listener lookup in a later patch. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14mlxsw: pci: Add mirror reason field to CQEv2Ido Schimmel
The Completion Queue Element version 2 (CQEv2) includes a field called 'mirror_reason' which indicates why the packet was mirrored to the CPU. Add the field so that it can be used by a later patch. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14mlxsw: trap: Add trap identifiers for mirrored packetsIdo Schimmel
Packets that are mirrored to the CPU port are trapped with one of eight trap identifiers. Add them. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14mlxsw: reg: Increase trap identifier to 10 bitsAmit Cohen
The trap identifier was increased to 10 bits in new versions of the Programmer's Reference Manual (PRM). Increase it accordingly in the Host PacKet Trap (HPKT) register and in the Completion Queue Element (CQE). This is significant for subsequent patches that will introduce trap identifiers which utilize the extended range. Signed-off-by: Amit Cohen <amitc@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14mlxsw: spectrum_span: Allow setting policer on a SPAN agentIdo Schimmel
When mirroring packets to the CPU port the mirrored packets are trapped to the CPU. However, unlike other traps, it is not possible to set a policer on the associated trap group. Instead, the policer needs to be set on the SPAN agent. Moreover, the policer ID must be within a specified range: From a configurable (even) base ID to this base plus the maximum number of SPAN agents. While the immediate use case is to set the policer on a SPAN agent that mirrors to the CPU port, a policer can be set on any SPAN agent. Therefore, the operation is implemented for all SPAN agent types. Extend the SPAN agent request API to allow passing the desired policer ID that should be bound to the SPAN agent. Return an error for Spectrum-1, as it does not support policer setting on a SPAN agent. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14mlxsw: spectrum_span: Allow passing parameters to SPAN agentsIdo Schimmel
Currently, the only parameter of a SPAN agent is the netdev which the SPAN agent should mirror to. The next patch will add the ability to request a SPAN agent that mirrors to a specific netdev and has a specific policer ID bound to it. This is required when mirroring packets to the CPU port. Therefore, encapsulate the sole parameter to mlxsw_sp_span_agent_get() in a structure, so that it could later be extended with policer information. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-15 13:16:14 +0000