summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-04-25tls: fix lockless read of strp->msg_ready in ->pollSabrina Dubroca
tls_sk_poll is called without locking the socket, and needs to read strp->msg_ready (via tls_strp_msg_ready). Convert msg_ready to a bool and use READ_ONCE/WRITE_ONCE where needed. The remaining reads are only performed when the socket is locked. Fixes: 121dca784fc0 ("tls: suppress wakeups unless we have a full record") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/0b7ee062319037cf86af6b317b3d72f7bfcd2e97.1713797701.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25dpll: fix dpll_pin_on_pin_register() for multiple parent pinsArkadiusz Kubalewski
In scenario where pin is registered with multiple parent pins via dpll_pin_on_pin_register(..), all belonging to the same dpll device. A second call to dpll_pin_on_pin_unregister(..) would cause a call trace, as it tries to use already released registration resources (due to fix introduced in b446631f355e). In this scenario pin was registered twice, so resources are not yet expected to be release until each registered pin/pin pair is unregistered. Currently, the following crash/call trace is produced when ice driver is removed on the system with installed E810T NIC which includes dpll device: WARNING: CPU: 51 PID: 9155 at drivers/dpll/dpll_core.c:809 dpll_pin_ops+0x20/0x30 RIP: 0010:dpll_pin_ops+0x20/0x30 Call Trace: ? __warn+0x7f/0x130 ? dpll_pin_ops+0x20/0x30 dpll_msg_add_pin_freq+0x37/0x1d0 dpll_cmd_pin_get_one+0x1c0/0x400 ? __nlmsg_put+0x63/0x80 dpll_pin_event_send+0x93/0x140 dpll_pin_on_pin_unregister+0x3f/0x100 ice_dpll_deinit_pins+0xa1/0x230 [ice] ice_remove+0xf1/0x210 [ice] Fix by adding a parent pointer as a cookie when creating a registration, also when searching for it. For the regular pins pass NULL, this allows to create separated registration for each parent the pin is registered with. Fixes: b446631f355e ("dpll: fix dpll_xa_ref_*_del() for multiple registrations") Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240424101636.1491424-1-arkadiusz.kubalewski@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25net: ravb: Fix registered interrupt namesGeert Uytterhoeven
As interrupts are now requested from ravb_probe(), before calling register_netdev(), ndev->name still contains the template "eth%d", leading to funny names in /proc/interrupts. E.g. on R-Car E3: 89: 0 0 GICv2 93 Level eth%d:ch22:multi 90: 0 3 GICv2 95 Level eth%d:ch24:emac 91: 0 23484 GICv2 71 Level eth%d:ch0:rx_be 92: 0 0 GICv2 72 Level eth%d:ch1:rx_nc 93: 0 13735 GICv2 89 Level eth%d:ch18:tx_be 94: 0 0 GICv2 90 Level eth%d:ch19:tx_nc Worse, on platforms with multiple RAVB instances (e.g. R-Car V4H), all interrupts have similar names. Fix this by using the device name instead, like is done in several other drivers: 89: 0 0 GICv2 93 Level e6800000.ethernet:ch22:multi 90: 0 1 GICv2 95 Level e6800000.ethernet:ch24:emac 91: 0 28578 GICv2 71 Level e6800000.ethernet:ch0:rx_be 92: 0 0 GICv2 72 Level e6800000.ethernet:ch1:rx_nc 93: 0 14044 GICv2 89 Level e6800000.ethernet:ch18:tx_be 94: 0 0 GICv2 90 Level e6800000.ethernet:ch19:tx_nc Rename the local variable dev_name, as it shadows the dev_name() function, and pre-initialize it, to simplify the code. Fixes: 32f012b8c01ca9fd ("net: ravb: Move getting/requesting IRQs in the probe() method") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S Link: https://lore.kernel.org/r/cde67b68adf115b3cf0b44c32334ae00b2fbb321.1713944647.git.geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25octeontx2-af: fix the double free in rvu_npc_freemem()Su Hui
Clang static checker(scan-build) warning： drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c:line 2184, column 2 Attempt to free released memory. npc_mcam_rsrcs_deinit() has released 'mcam->counters.bmap'. Deleted this redundant kfree() to fix this double free problem. Fixes: dd7842878633 ("octeontx2-af: Add new devlink param to configure maximum usable NIX block LFs") Signed-off-by: Su Hui <suhui@nfschina.com> Reviewed-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Hariprasad Kelam <hkelam@marvell.com> Link: https://lore.kernel.org/r/20240424022724.144587-1-suhui@nfschina.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25net: ethernet: ti: am65-cpts: Fix PTPv1 message type on TX packetsJason Reeder
The CPTS, by design, captures the messageType (Sync, Delay_Req, etc.) field from the second nibble of the PTP header which is defined in the PTPv2 (1588-2008) specification. In the PTPv1 (1588-2002) specification the first two bytes of the PTP header are defined as the versionType which is always 0x0001. This means that any PTPv1 packets that are tagged for TX timestamping by the CPTS will have their messageType set to 0x0 which corresponds to a Sync message type. This causes issues when a PTPv1 stack is expecting a Delay_Req (messageType: 0x1) timestamp that never appears. Fix this by checking if the ptp_class of the timestamped TX packet is PTP_CLASS_V1 and then matching the PTP sequence ID to the stored sequence ID in the skb->cb data structure. If the sequence IDs match and the packet is of type PTPv1 then there is a chance that the messageType has been incorrectly stored by the CPTS so overwrite the messageType stored by the CPTS with the messageType from the skb->cb data structure. This allows the PTPv1 stack to receive TX timestamps for Delay_Req packets which are necessary to lock onto a PTP Leader. Signed-off-by: Jason Reeder <jreeder@ti.com> Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com> Tested-by: Ed Trexel <ed.trexel@hp.com> Fixes: f6bd59526ca5 ("net: ethernet: ti: introduce am654 common platform time sync driver") Link: https://lore.kernel.org/r/20240424071626.32558-1-r-gunasekaran@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25Merge branch 'intel-wired-lan-driver-updates-2024-04-23-i40e-iavf-ice'Jakub Kicinski
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-04-23 (i40e, iavf, ice) This series contains updates to i40e, iavf, and ice drivers. Sindhu removes WQ_MEM_RECLAIM flag from workqueue for i40e. Erwan Velu adjusts message to avoid confusion on base being reported on i40e. Sudheer corrects insufficient check for TC equality on iavf. Jake corrects ordering of locks to avoid possible deadlock on ice. ==================== Link: https://lore.kernel.org/r/20240423182723.740401-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25Merge branch ↵Jakub Kicinski
'fix-isolation-of-broadcast-traffic-and-unmatched-unicast-traffic-with-macsec-offload' Rahul Rameshbabu says: ==================== Fix isolation of broadcast traffic and unmatched unicast traffic with MACsec offload Some device drivers support devices that enable them to annotate whether a Rx skb refers to a packet that was processed by the MACsec offloading functionality of the device. Logic in the Rx handling for MACsec offload does not utilize this information to preemptively avoid forwarding to the macsec netdev currently. Because of this, things like multicast messages or unicast messages with an unmatched destination address such as ARP requests are forwarded to the macsec netdev whether the message received was MACsec encrypted or not. The goal of this patch series is to improve the Rx handling for MACsec offload for devices capable of annotating skbs received that were decrypted by the NIC offload for MACsec. Here is a summary of the issue that occurs with the existing logic today. * The current design of the MACsec offload handling path tries to use "best guess" mechanisms for determining whether a packet associated with the currently handled skb in the datapath was processed via HW offload * The best guess mechanism uses the following heuristic logic (in order of precedence) - Check if header destination MAC address matches MACsec netdev MAC address -> forward to MACsec port - Check if packet is multicast traffic -> forward to MACsec port - MACsec security channel was able to be looked up from skb offload context (mlx5 only) -> forward to MACsec port * Problem: plaintext traffic can potentially solicit a MACsec encrypted response from the offload device - Core aspect of MACsec is that it identifies unauthorized LAN connections and excludes them from communication + This behavior can be seen when not enabling offload for MACsec - The offload behavior violates this principle in MACsec I believe this behavior is a security bug since applications utilizing MACsec could be exploited using this behavior, and the correct way to resolve this is by having the hardware correctly indicate whether MACsec offload occurred for the packet or not. In the patches in this series, I leave a warning for when the problematic path occurs because I cannot figure out a secure way to fix the security issue that applies to the core MACsec offload handling in the Rx path without breaking MACsec offload for other vendors. Shown at the bottom is an example use case where plaintext traffic sent to a physical port of a NIC configured for MACsec offload is unable to be handled correctly by the software stack when the NIC provides awareness to the kernel about whether the received packet is MACsec traffic or not. In this specific example, plaintext ARP requests are being responded with MACsec encrypted ARP replies (which leads to routing information being unable to be built for the requester). Side 1 ip link del macsec0 ip address flush mlx5_1 ip address add 1.1.1.1/24 dev mlx5_1 ip link set dev mlx5_1 up ip link add link mlx5_1 macsec0 type macsec sci 1 encrypt on ip link set dev macsec0 address 00:11:22:33:44:66 ip macsec offload macsec0 mac ip macsec add macsec0 tx sa 0 pn 1 on key 00 dffafc8d7b9a43d5b9a3dfbbf6a30c16 ip macsec add macsec0 rx sci 2 on ip macsec add macsec0 rx sci 2 sa 0 pn 1 on key 00 ead3664f508eb06c40ac7104cdae4ce5 ip address flush macsec0 ip address add 2.2.2.1/24 dev macsec0 ip link set dev macsec0 up # macsec0 enters promiscuous mode. # This enables all traffic received on macsec_vlan to be processed by # the macsec offload rx datapath. This however means that traffic # meant to be received by mlx5_1 will be incorrectly steered to # macsec0 as well. ip link add link macsec0 name macsec_vlan type vlan id 1 ip link set dev macsec_vlan address 00:11:22:33:44:88 ip address flush macsec_vlan ip address add 3.3.3.1/24 dev macsec_vlan ip link set dev macsec_vlan up Side 2 ip link del macsec0 ip address flush mlx5_1 ip address add 1.1.1.2/24 dev mlx5_1 ip link set dev mlx5_1 up ip link add link mlx5_1 macsec0 type macsec sci 2 encrypt on ip link set dev macsec0 address 00:11:22:33:44:77 ip macsec offload macsec0 mac ip macsec add macsec0 tx sa 0 pn 1 on key 00 ead3664f508eb06c40ac7104cdae4ce5 ip macsec add macsec0 rx sci 1 on ip macsec add macsec0 rx sci 1 sa 0 pn 1 on key 00 dffafc8d7b9a43d5b9a3dfbbf6a30c16 ip address flush macsec0 ip address add 2.2.2.2/24 dev macsec0 ip link set dev macsec0 up # macsec0 enters promiscuous mode. # This enables all traffic received on macsec_vlan to be processed by # the macsec offload rx datapath. This however means that traffic # meant to be received by mlx5_1 will be incorrectly steered to # macsec0 as well. ip link add link macsec0 name macsec_vlan type vlan id 1 ip link set dev macsec_vlan address 00:11:22:33:44:99 ip address flush macsec_vlan ip address add 3.3.3.2/24 dev macsec_vlan ip link set dev macsec_vlan up Side 1 ping -I mlx5_1 1.1.1.2 PING 1.1.1.2 (1.1.1.2) from 1.1.1.1 mlx5_1: 56(84) bytes of data. From 1.1.1.1 icmp_seq=1 Destination Host Unreachable ping: sendmsg: No route to host From 1.1.1.1 icmp_seq=2 Destination Host Unreachable From 1.1.1.1 icmp_seq=3 Destination Host Unreachable Changes: v2->v3: * Made dev paramater const for eth_skb_pkt_type helper as suggested by Sabrina Dubroca <sd@queasysnail.net> v1->v2: * Fixed series subject to detail the issue being fixed * Removed strange characters from cover letter * Added comment in example that illustrates the impact involving promiscuous mode * Added patch for generalizing packet type detection * Added Fixes: tags and targeting net * Removed pointless warning in the heuristic Rx path for macsec offload * Applied small refactor in Rx path offload to minimize scope of rx_sc local variable Link: https://github.com/Binary-Eater/macsec-rx-offload/blob/trunk/MACsec_violation_in_core_stack_offload_rx_handling.pdf Link: https://lore.kernel.org/netdev/20240419213033.400467-5-rrameshbabu@nvidia.com/ Link: https://lore.kernel.org/netdev/20240419011740.333714-1-rrameshbabu@nvidia.com/ Link: https://lore.kernel.org/netdev/87r0l25y1c.fsf@nvidia.com/ Link: https://lore.kernel.org/netdev/20231116182900.46052-1-rrameshbabu@nvidia.com/ ==================== Link: https://lore.kernel.org/r/20240423181319.115860-1-rrameshbabu@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25ice: fix LAG and VF lock dependency in ice_reset_vf()Jacob Keller
9f74a3dfcf83 ("ice: Fix VF Reset paths when interface in a failed over aggregate"), the ice driver has acquired the LAG mutex in ice_reset_vf(). The commit placed this lock acquisition just prior to the acquisition of the VF configuration lock. If ice_reset_vf() acquires the configuration lock via the ICE_VF_RESET_LOCK flag, this could deadlock with ice_vc_cfg_qs_msg() because it always acquires the locks in the order of the VF configuration lock and then the LAG mutex. Lockdep reports this violation almost immediately on creating and then removing 2 VF: ====================================================== WARNING: possible circular locking dependency detected 6.8.0-rc6 #54 Tainted: G W O ------------------------------------------------------ kworker/60:3/6771 is trying to acquire lock: ff40d43e099380a0 (&vf->cfg_lock){+.+.}-{3:3}, at: ice_reset_vf+0x22f/0x4d0 [ice] but task is already holding lock: ff40d43ea1961210 (&pf->lag_mutex){+.+.}-{3:3}, at: ice_reset_vf+0xb7/0x4d0 [ice] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&pf->lag_mutex){+.+.}-{3:3}: __lock_acquire+0x4f8/0xb40 lock_acquire+0xd4/0x2d0 __mutex_lock+0x9b/0xbf0 ice_vc_cfg_qs_msg+0x45/0x690 [ice] ice_vc_process_vf_msg+0x4f5/0x870 [ice] __ice_clean_ctrlq+0x2b5/0x600 [ice] ice_service_task+0x2c9/0x480 [ice] process_one_work+0x1e9/0x4d0 worker_thread+0x1e1/0x3d0 kthread+0x104/0x140 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1b/0x30 -> #0 (&vf->cfg_lock){+.+.}-{3:3}: check_prev_add+0xe2/0xc50 validate_chain+0x558/0x800 __lock_acquire+0x4f8/0xb40 lock_acquire+0xd4/0x2d0 __mutex_lock+0x9b/0xbf0 ice_reset_vf+0x22f/0x4d0 [ice] ice_process_vflr_event+0x98/0xd0 [ice] ice_service_task+0x1cc/0x480 [ice] process_one_work+0x1e9/0x4d0 worker_thread+0x1e1/0x3d0 kthread+0x104/0x140 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1b/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&pf->lag_mutex); lock(&vf->cfg_lock); lock(&pf->lag_mutex); lock(&vf->cfg_lock); *** DEADLOCK *** 4 locks held by kworker/60:3/6771: #0: ff40d43e05428b38 ((wq_completion)ice){+.+.}-{0:0}, at: process_one_work+0x176/0x4d0 #1: ff50d06e05197e58 ((work_completion)(&pf->serv_task)){+.+.}-{0:0}, at: process_one_work+0x176/0x4d0 #2: ff40d43ea1960e50 (&pf->vfs.table_lock){+.+.}-{3:3}, at: ice_process_vflr_event+0x48/0xd0 [ice] #3: ff40d43ea1961210 (&pf->lag_mutex){+.+.}-{3:3}, at: ice_reset_vf+0xb7/0x4d0 [ice] stack backtrace: CPU: 60 PID: 6771 Comm: kworker/60:3 Tainted: G W O 6.8.0-rc6 #54 Hardware name: Workqueue: ice ice_service_task [ice] Call Trace: <TASK> dump_stack_lvl+0x4a/0x80 check_noncircular+0x12d/0x150 check_prev_add+0xe2/0xc50 ? save_trace+0x59/0x230 ? add_chain_cache+0x109/0x450 validate_chain+0x558/0x800 __lock_acquire+0x4f8/0xb40 ? lockdep_hardirqs_on+0x7d/0x100 lock_acquire+0xd4/0x2d0 ? ice_reset_vf+0x22f/0x4d0 [ice] ? lock_is_held_type+0xc7/0x120 __mutex_lock+0x9b/0xbf0 ? ice_reset_vf+0x22f/0x4d0 [ice] ? ice_reset_vf+0x22f/0x4d0 [ice] ? rcu_is_watching+0x11/0x50 ? ice_reset_vf+0x22f/0x4d0 [ice] ice_reset_vf+0x22f/0x4d0 [ice] ? process_one_work+0x176/0x4d0 ice_process_vflr_event+0x98/0xd0 [ice] ice_service_task+0x1cc/0x480 [ice] process_one_work+0x1e9/0x4d0 worker_thread+0x1e1/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0x104/0x140 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> To avoid deadlock, we must acquire the LAG mutex only after acquiring the VF configuration lock. Fix the ice_reset_vf() to acquire the LAG mutex only after we either acquire or check that the VF configuration lock is held. Fixes: 9f74a3dfcf83 ("ice: Fix VF Reset paths when interface in a failed over aggregate") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Dave Ertman <david.m.ertman@intel.com> Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240423182723.740401-5-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25iavf: Fix TC config comparison with existing adapter TC configSudheer Mogilappagari
Same number of TCs doesn't imply that underlying TC configs are same. The config could be different due to difference in number of queues in each TC. Add utility function to determine if TC configs are same. Fixes: d5b33d024496 ("i40evf: add ndo_setup_tc callback to i40evf") Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Tested-by: Mineri Bhange <minerix.bhange@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240423182723.740401-4-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25i40e: Report MFS in decimal base instead of hexErwan Velu
If the MFS is set below the default (0x2600), a warning message is reported like the following : MFS for port 1 has been set below the default: 600 This message is a bit confusing as the number shown here (600) is in fact an hexa number: 0x600 = 1536 Without any explicit "0x" prefix, this message is read like the MFS is set to 600 bytes. MFS, as per MTUs, are usually expressed in decimal base. This commit reports both current and default MFS values in decimal so it's less confusing for end-users. A typical warning message looks like the following : MFS for port 1 (1536) has been set below the default (9728) Signed-off-by: Erwan Velu <e.velu@criteo.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Fixes: 3a2c6ced90e1 ("i40e: Add a check to see if MFS is set") Link: https://lore.kernel.org/r/20240423182723.740401-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25i40e: Do not use WQ_MEM_RECLAIM flag for workqueueSindhu Devale
Issue reported by customer during SRIOV testing, call trace: When both i40e and the i40iw driver are loaded, a warning in check_flush_dependency is being triggered. This seems to be because of the i40e driver workqueue is allocated with the WQ_MEM_RECLAIM flag, and the i40iw one is not. Similar error was encountered on ice too and it was fixed by removing the flag. Do the same for i40e too. [Feb 9 09:08] ------------[ cut here ]------------ [ +0.000004] workqueue: WQ_MEM_RECLAIM i40e:i40e_service_task [i40e] is flushing !WQ_MEM_RECLAIM infiniband:0x0 [ +0.000060] WARNING: CPU: 0 PID: 937 at kernel/workqueue.c:2966 check_flush_dependency+0x10b/0x120 [ +0.000007] Modules linked in: snd_seq_dummy snd_hrtimer snd_seq snd_timer snd_seq_device snd soundcore nls_utf8 cifs cifs_arc4 nls_ucs2_utils rdma_cm iw_cm ib_cm cifs_md4 dns_resolver netfs qrtr rfkill sunrpc vfat fat intel_rapl_msr intel_rapl_common irdma intel_uncore_frequency intel_uncore_frequency_common ice ipmi_ssif isst_if_common skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp gnss coretemp ib_uverbs rapl intel_cstate ib_core iTCO_wdt iTCO_vendor_support acpi_ipmi mei_me ipmi_si intel_uncore ioatdma i2c_i801 joydev pcspkr mei ipmi_devintf lpc_ich intel_pch_thermal i2c_smbus ipmi_msghandler acpi_power_meter acpi_pad xfs libcrc32c ast sd_mod drm_shmem_helper t10_pi drm_kms_helper sg ixgbe drm i40e ahci crct10dif_pclmul libahci crc32_pclmul igb crc32c_intel libata ghash_clmulni_intel i2c_algo_bit mdio dca wmi dm_mirror dm_region_hash dm_log dm_mod fuse [ +0.000050] CPU: 0 PID: 937 Comm: kworker/0:3 Kdump: loaded Not tainted 6.8.0-rc2-Feb-net_dev-Qiueue-00279-gbd43c5687e05 #1 [ +0.000003] Hardware name: Intel Corporation S2600BPB/S2600BPB, BIOS SE5C620.86B.02.01.0013.121520200651 12/15/2020 [ +0.000001] Workqueue: i40e i40e_service_task [i40e] [ +0.000024] RIP: 0010:check_flush_dependency+0x10b/0x120 [ +0.000003] Code: ff 49 8b 54 24 18 48 8d 8b b0 00 00 00 49 89 e8 48 81 c6 b0 00 00 00 48 c7 c7 b0 97 fa 9f c6 05 8a cc 1f 02 01 e8 35 b3 fd ff <0f> 0b e9 10 ff ff ff 80 3d 78 cc 1f 02 00 75 94 e9 46 ff ff ff 90 [ +0.000002] RSP: 0018:ffffbd294976bcf8 EFLAGS: 00010282 [ +0.000002] RAX: 0000000000000000 RBX: ffff94d4c483c000 RCX: 0000000000000027 [ +0.000001] RDX: ffff94d47f620bc8 RSI: 0000000000000001 RDI: ffff94d47f620bc0 [ +0.000001] RBP: 0000000000000000 R08: 0000000000000000 R09: 00000000ffff7fff [ +0.000001] R10: ffffbd294976bb98 R11: ffffffffa0be65e8 R12: ffff94c5451ea180 [ +0.000001] R13: ffff94c5ab5e8000 R14: ffff94c5c20b6e05 R15: ffff94c5f1330ab0 [ +0.000001] FS: 0000000000000000(0000) GS:ffff94d47f600000(0000) knlGS:0000000000000000 [ +0.000002] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000001] CR2: 00007f9e6f1fca70 CR3: 0000000038e20004 CR4: 00000000007706f0 [ +0.000000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ +0.000001] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ +0.000001] PKRU: 55555554 [ +0.000001] Call Trace: [ +0.000001] <TASK> [ +0.000002] ? __warn+0x80/0x130 [ +0.000003] ? check_flush_dependency+0x10b/0x120 [ +0.000002] ? report_bug+0x195/0x1a0 [ +0.000005] ? handle_bug+0x3c/0x70 [ +0.000003] ? exc_invalid_op+0x14/0x70 [ +0.000002] ? asm_exc_invalid_op+0x16/0x20 [ +0.000006] ? check_flush_dependency+0x10b/0x120 [ +0.000002] ? check_flush_dependency+0x10b/0x120 [ +0.000002] __flush_workqueue+0x126/0x3f0 [ +0.000015] ib_cache_cleanup_one+0x1c/0xe0 [ib_core] [ +0.000056] __ib_unregister_device+0x6a/0xb0 [ib_core] [ +0.000023] ib_unregister_device_and_put+0x34/0x50 [ib_core] [ +0.000020] i40iw_close+0x4b/0x90 [irdma] [ +0.000022] i40e_notify_client_of_netdev_close+0x54/0xc0 [i40e] [ +0.000035] i40e_service_task+0x126/0x190 [i40e] [ +0.000024] process_one_work+0x174/0x340 [ +0.000003] worker_thread+0x27e/0x390 [ +0.000001] ? __pfx_worker_thread+0x10/0x10 [ +0.000002] kthread+0xdf/0x110 [ +0.000002] ? __pfx_kthread+0x10/0x10 [ +0.000002] ret_from_fork+0x2d/0x50 [ +0.000003] ? __pfx_kthread+0x10/0x10 [ +0.000001] ret_from_fork_asm+0x1b/0x30 [ +0.000004] </TASK> [ +0.000001] ---[ end trace 0000000000000000 ]--- Fixes: 4d5957cbdecd ("i40e: remove WQ_UNBOUND and the task limit of our workqueue") Signed-off-by: Sindhu Devale <sindhu.devale@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Robert Ganzynkowicz <robert.ganzynkowicz@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240423182723.740401-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()Dan Carpenter
The rx_chn->irq[] array is unsigned int but it should be signed for the error handling to work. Also if k3_udma_glue_rx_get_irq() returns zero then we should return -ENXIO instead of success. Fixes: 128d5874c082 ("net: ti: icssg-prueth: Add ICSSG ethernet driver") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: MD Danish Anwar <danishanwar@ti.com> Link: https://lore.kernel.org/r/05282415-e7f4-42f3-99f8-32fde8f30936@moroto.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25net/mlx5e: Advertise mlx5 ethernet driver updates sk_buff md_dst for MACsecRahul Rameshbabu
mlx5 Rx flow steering and CQE handling enable the driver to be able to update an skb's md_dst attribute as MACsec when MACsec traffic arrives when a device is configured for offloading. Advertise this to the core stack to take advantage of this capability. Cc: stable@vger.kernel.org Fixes: b7c9400cbc48 ("net/mlx5e: Implement MACsec Rx data path using MACsec skb_metadata_dst") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/20240423181319.115860-5-rrameshbabu@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25macsec: Detect if Rx skb is macsec-related for offloading devices that ↵Rahul Rameshbabu
update md_dst Can now correctly identify where the packets should be delivered by using md_dst or its absence on devices that provide it. This detection is not possible without device drivers that update md_dst. A fallback pattern should be used for supporting such device drivers. This fallback mode causes multicast messages to be cloned to both the non-macsec and macsec ports, independent of whether the multicast message received was encrypted over MACsec or not. Other non-macsec traffic may also fail to be handled correctly for devices in promiscuous mode. Link: https://lore.kernel.org/netdev/ZULRxX9eIbFiVi7v@hog/ Cc: Sabrina Dubroca <sd@queasysnail.net> Cc: stable@vger.kernel.org Fixes: 860ead89b851 ("net/macsec: Add MACsec skb_metadata_dst Rx Data path support") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/20240423181319.115860-4-rrameshbabu@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25ethernet: Add helper for assigning packet type when dest address does not ↵Rahul Rameshbabu
match device address Enable reuse of logic in eth_type_trans for determining packet type. Suggested-by: Sabrina Dubroca <sd@queasysnail.net> Cc: stable@vger.kernel.org Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/20240423181319.115860-3-rrameshbabu@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25macsec: Enable devices to advertise whether they update sk_buff md_dst ↵Rahul Rameshbabu
during offloads Cannot know whether a Rx skb missing md_dst is intended for MACsec or not without knowing whether the device is able to update this field during an offload. Assume that an offload to a MACsec device cannot support updating md_dst by default. Capable devices can advertise that they do indicate that an skb is related to a MACsec offloaded packet using the md_dst. Cc: Sabrina Dubroca <sd@queasysnail.net> Cc: stable@vger.kernel.org Fixes: 860ead89b851 ("net/macsec: Add MACsec skb_metadata_dst Rx Data path support") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/20240423181319.115860-2-rrameshbabu@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25tools: testing: selftests: prefer TEST_PROGS for conntrack_dump_flushFlorian Westphal
Currently conntrack_dump_flush test program always runs when passing TEST_PROGS argument: % make -C tools/testing/selftests TARGETS=net/netfilter \ TEST_PROGS=conntrack_ipip_mtu.sh run_tests make: Entering [..] TAP version 13 1..2 [..] selftests: net/netfilter: conntrack_dump_flush [..] Move away from TEST_CUSTOM_PROGS to avoid this. After this, above command will only run the program specified in TEST_PROGS. Link: https://lore.kernel.org/netdev/20240423191609.70c14c42@kernel.org/ Signed-off-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20240424095824.5555-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25net: bridge: remove redundant check of f->dstlinke li
In br_fill_forward_path(), f->dst is checked not to be NULL, then immediately read using READ_ONCE and checked again. The first check is useless, so this patch aims to remove the redundant check of f->dst. Signed-off-by: linke li <lilinke99@qq.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-25Merge tag 'wireless-2024-04-23' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes berg says: ==================== Fixes for the current cycle: * ath11k: convert to correct RCU iteration of IPv6 addresses * iwlwifi: link ID, FW API version, scanning and PASN fixes * cfg80211: NULL-deref and tracing fixes * mac80211: connection mode, mesh fast-TX, multi-link and various other small fixes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-25net: phy: dp83869: Fix MII mode failureMD Danish Anwar
The DP83869 driver sets the MII bit (needed for PHY to work in MII mode) only if the op-mode is either DP83869_100M_MEDIA_CONVERT or DP83869_RGMII_100_BASE. Some drivers i.e. ICSSG support MII mode with op-mode as DP83869_RGMII_COPPER_ETHERNET for which the MII bit is not set in dp83869 driver. As a result MII mode on ICSSG doesn't work and below log is seen. TI DP83869 300b2400.mdio:0f: selected op-mode is not valid with MII mode icssg-prueth icssg1-eth: couldn't connect to phy ethernet-phy@0 icssg-prueth icssg1-eth: can't phy connect port MII0 Fix this by setting MII bit for DP83869_RGMII_COPPER_ETHERNET op-mode as well. Fixes: 94e86ef1b801 ("net: phy: dp83869: support mii mode when rgmii strap cfg is used") Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-25net: dsa: mv88e6xxx: Avoid EEPROM timeout without EEPROM on 88E6250-family ↵Matthias Schiffer
switches 88E6250-family switches have the quirk that the EEPROM Running flag can get stuck at 1 when no EEPROM is connected, causing mv88e6xxx_g2_eeprom_wait() to time out. We still want to wait for the EEPROM however, to avoid interrupting a transfer and leaving the EEPROM in an invalid state. The condition to wait for recommended by the hardware spec is the EEInt flag, however this flag is cleared on read, so before the hardware reset, is may have been cleared already even though the EEPROM has been read successfully. For this reason, we revive the mv88e6xxx_g1_wait_eeprom_done() function that was removed in commit 6ccf50d4d474 ("net: dsa: mv88e6xxx: Avoid EEPROM timeout when EEPROM is absent") in a slightly refactored form, and introduce a new mv88e6xxx_g1_wait_eeprom_done_prereset() that additionally handles this case by triggering another EEPROM reload that can be waited on. On other switch models without this quirk, mv88e6xxx_g2_eeprom_wait() is kept, as it avoids the additional reload. Fixes: 6ccf50d4d474 ("net: dsa: mv88e6xxx: Avoid EEPROM timeout when EEPROM is absent") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-25net: dsa: mv88e6xxx: Add support for model-specific pre- and post-reset handlersMatthias Schiffer
Instead of calling mv88e6xxx_g2_eeprom_wait() directly from mv88e6xxx_hardware_reset(), add configurable pre- and post-reset hard reset handlers. Initially, the handlers are set to mv88e6xxx_g2_eeprom_wait() for all families that have get/set_eeprom() to match the existing behavior. No functional change intended (except for additional error messages on failure). Fixes: 6ccf50d4d474 ("net: dsa: mv88e6xxx: Avoid EEPROM timeout when EEPROM is absent") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-25enic: Replace hardcoded values for vnic descriptor by definesSatish Kharat
Replace the hardcoded values used in the calculations for vnic descriptors and rings with defines. Minor code cleanup. Signed-off-by: Satish Kharat <satishkh@cisco.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-25netfilter: nf_tables: honor table dormant flag from netdev release event pathPablo Neira Ayuso
Check for table dormant flag otherwise netdev release event path tries to unregister an already unregistered hook. [524854.857999] ------------[ cut here ]------------ [524854.858010] WARNING: CPU: 0 PID: 3386599 at net/netfilter/core.c:501 __nf_unregister_net_hook+0x21a/0x260 [...] [524854.858848] CPU: 0 PID: 3386599 Comm: kworker/u32:2 Not tainted 6.9.0-rc3+ #365 [524854.858869] Workqueue: netns cleanup_net [524854.858886] RIP: 0010:__nf_unregister_net_hook+0x21a/0x260 [524854.858903] Code: 24 e8 aa 73 83 ff 48 63 43 1c 83 f8 01 0f 85 3d ff ff ff e8 98 d1 f0 ff 48 8b 3c 24 e8 8f 73 83 ff 48 63 43 1c e9 26 ff ff ff <0f> 0b 48 83 c4 18 48 c7 c7 00 68 e9 82 5b 5d 41 5c 41 5d 41 5e 41 [524854.858914] RSP: 0018:ffff8881e36d79e0 EFLAGS: 00010246 [524854.858926] RAX: 0000000000000000 RBX: ffff8881339ae790 RCX: ffffffff81ba524a [524854.858936] RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff8881c8a16438 [524854.858945] RBP: ffff8881c8a16438 R08: 0000000000000001 R09: ffffed103c6daf34 [524854.858954] R10: ffff8881e36d79a7 R11: 0000000000000000 R12: 0000000000000005 [524854.858962] R13: ffff8881c8a16000 R14: 0000000000000000 R15: ffff8881351b5a00 [524854.858971] FS: 0000000000000000(0000) GS:ffff888390800000(0000) knlGS:0000000000000000 [524854.858982] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [524854.858991] CR2: 00007fc9be0f16f4 CR3: 00000001437cc004 CR4: 00000000001706f0 [524854.859000] Call Trace: [524854.859006] <TASK> [524854.859013] ? __warn+0x9f/0x1a0 [524854.859027] ? __nf_unregister_net_hook+0x21a/0x260 [524854.859044] ? report_bug+0x1b1/0x1e0 [524854.859060] ? handle_bug+0x3c/0x70 [524854.859071] ? exc_invalid_op+0x17/0x40 [524854.859083] ? asm_exc_invalid_op+0x1a/0x20 [524854.859100] ? __nf_unregister_net_hook+0x6a/0x260 [524854.859116] ? __nf_unregister_net_hook+0x21a/0x260 [524854.859135] nf_tables_netdev_event+0x337/0x390 [nf_tables] [524854.859304] ? __pfx_nf_tables_netdev_event+0x10/0x10 [nf_tables] [524854.859461] ? packet_notifier+0xb3/0x360 [524854.859476] ? _raw_spin_unlock_irqrestore+0x11/0x40 [524854.859489] ? dcbnl_netdevice_event+0x35/0x140 [524854.859507] ? __pfx_nf_tables_netdev_event+0x10/0x10 [nf_tables] [524854.859661] notifier_call_chain+0x7d/0x140 [524854.859677] unregister_netdevice_many_notify+0x5e1/0xae0 Fixes: d54725cd11a5 ("netfilter: nf_tables: support for multiple devices per netdev hook") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-04-25Merge branch 'tcp-trace-next'David S. Miller
Philo Lu says: ==================== tcp: update TCPCB_EVER_RETRANS after trace_tcp_retransmit_skb() Move TCPCB_EVER_RETRANS updating after the trace_tcp_retransmit_skb() in __tcp_retransmit_skb(), and then we are aware of whether the skb has ever been retransmitted in this tracepoint. This can be used, e.g., to get retransmission efficiency by counting skbs w/ and w/o TCPCB_EVER_RETRANS (through bpf tracing programs). For this purpose, TCPCB_EVER_RETRANS is also needed to be exposed to bpf. Previously, the flags are defined as macros in struct tcp_skb_cb. I moved them out into a new enum, and then they can be accessed with vmlinux.h. We have discussed to achieve this with BPF_SOCK_OPS in [0], and using tracepoint is thought to be a better solution. [0] https://lore.kernel.org/all/20240417124622.35333-1-lulie@linux.alibaba.com/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-25tcp: update sacked after tracepoint in __tcp_retransmit_skbPhilo Lu
Marking TCP_SKB_CB(skb)->sacked with TCPCB_EVER_RETRANS after the traceopint (trace_tcp_retransmit_skb), then we can get the retransmission efficiency by counting skbs w/ and w/o TCPCB_EVER_RETRANS mark in this tracepoint. We have discussed to achieve this with BPF_SOCK_OPS in [0], and using tracepoint is thought to be a better solution. [0] https://lore.kernel.org/all/20240417124622.35333-1-lulie@linux.alibaba.com/ Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-25tcp: move tcp_skb_cb->sacked flags to enumPhilo Lu
Move the flag definitions for tcp_skb_cb->sacked into a new enum named tcp_skb_cb_sacked_flags, then we can get access to them in bpf via vmlinux.h, e.g., in tracepoints. This patch does not change any existing functionality. Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-24Merge tag 'for-net-2024-04-24' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - qca: set power_ctrl_enabled on NULL returned by gpiod_get_optional() - hci_sync: Using hci_cmd_sync_submit when removing Adv Monitor - qca: fix invalid device address check - hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync - Fix type of len in {l2cap,sco}_sock_getsockopt_old() - btusb: mediatek: Fix double free of skb in coredump - btusb: Add Realtek RTL8852BE support ID 0x0bda:0x4853 - btusb: Fix triggering coredump implementation for QCA * tag 'for-net-2024-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: qca: set power_ctrl_enabled on NULL returned by gpiod_get_optional() Bluetooth: hci_sync: Using hci_cmd_sync_submit when removing Adv Monitor Bluetooth: qca: fix NULL-deref on non-serdev setup Bluetooth: qca: fix NULL-deref on non-serdev suspend Bluetooth: btusb: mediatek: Fix double free of skb in coredump Bluetooth: MGMT: Fix failing to MGMT_OP_ADD_UUID/MGMT_OP_REMOVE_UUID Bluetooth: qca: fix invalid device address check Bluetooth: hci_event: Fix sending HCI_OP_READ_ENC_KEY_SIZE Bluetooth: btusb: Fix triggering coredump implementation for QCA Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0bda:0x4853 Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old() ==================== Link: https://lore.kernel.org/r/20240424204102.2319483-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-24eth: bnxt: fix counting packets discarded due to OOM and netpollJakub Kicinski
I added OOM and netpoll discard counters, naively assuming that the cpr pointer is pointing to a common completion ring. Turns out that is usually *a* completion ring but not *the* completion ring which bnapi->cp_ring points to. bnapi->cp_ring is where the stats are read from, so we end up reporting 0 thru ethtool -S and qstat even though the drop events have happened. Make 100% sure we're recording statistics in the correct structure. Fixes: 907fd4a294db ("bnxt: count discards due to memory allocation errors") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240424002148.3937059-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-24Merge branch 'selftests-net-extract-bpf-building-logic-from-the-makefile'Jakub Kicinski
Jakub Kicinski says: ==================== selftests: net: extract BPF building logic from the Makefile This has been sitting in my tree for a while. I will soon add YNL/libynl support for networking selftests. This prompted a small cleanup of the selftest makefile for net/. We don't want to be piling logic for each library in there. YNL will get its own .mk file which can be included. Do the same for the BPF building section, already. No funcional changes here, just a code move and small rename. ==================== Link: https://lore.kernel.org/r/20240423183542.3807234-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-24selftests: net: extract BPF building logic from the MakefileJakub Kicinski
The BPF sample building code looks a little bit spaghetti-ish so move it out to its own Makefile snippet. Similar in the spirit to how we include lib.mk. libynl will soon get a similar snippet. There is a small change hiding in the move, the relative paths (../../.., ../.. etc) are replaced with variables from lib.mk such as top_srcdir and selfdir. Link: https://lore.kernel.org/r/20240423183542.3807234-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-24selftests: net: name bpf objects consistently and simplify MakefileJakub Kicinski
The BPF sources moved with bpf_offload.py have a suffix of .bpf.c which seems to be useful convention. Rename the 2 other BPF sources we had. Use wildcard in the Makefile, since we can match all those files easily now. Link: https://lore.kernel.org/r/20240423183542.3807234-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-24net: pse-pd: Kconfig: Add missing Regulator API dependencyKory Maincent (Dent Project)
The PSE (Power Sourcing Equipment) API now relies on the Regulator API. However, the Regulator dependency was missing from Kconfig. This patch adds the necessary dependency, resolving the issue of the missing dependency and ensuring proper functionality of the PSE API. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202404201020.mqX2IOu7-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202404200036.D8ap1Mf5-lkp@intel.com/ Fixes: d83e13761d5b ("net: pse-pd: Use regulator framework within PSE framework") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://lore.kernel.org/r/20240423-fix_poe-v3-3-e50f32f5fa59@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-24net: pse-pd: pse_core: Fix pse regulator typeKory Maincent (Dent Project)
Clarify PSE regulator as voltage regulator, not current. The PSE (Power Sourcing Equipment) regulator is defined as a voltage regulator, maintaining fixed voltage while accommodating varying current. Fixes: d83e13761d5b ("net: pse-pd: Use regulator framework within PSE framework") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://lore.kernel.org/r/20240423-fix_poe-v3-2-e50f32f5fa59@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-24net: pse-pd: pse_core: Add missing kdoc return descriptionKory Maincent (Dent Project)
Add missing kernel documentation return description. This allows to remove all warning from kernel-doc test script. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://lore.kernel.org/r/20240423-fix_poe-v3-1-e50f32f5fa59@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-24igc: Fix LED-related deadlock on driver unbindLukas Wunner
Roman reports a deadlock on unplug of a Thunderbolt docking station containing an Intel I225 Ethernet adapter. The root cause is that led_classdev's for LEDs on the adapter are registered such that they're device-managed by the netdev. That results in recursive acquisition of the rtnl_lock() mutex on unplug: When the driver calls unregister_netdev(), it acquires rtnl_lock(), then frees the device-managed resources. Upon unregistering the LEDs, netdev_trig_deactivate() invokes unregister_netdevice_notifier(), which tries to acquire rtnl_lock() again. Avoid by using non-device-managed LED registration. Stack trace for posterity: schedule+0x6e/0xf0 schedule_preempt_disabled+0x15/0x20 __mutex_lock+0x2a0/0x750 unregister_netdevice_notifier+0x40/0x150 netdev_trig_deactivate+0x1f/0x60 [ledtrig_netdev] led_trigger_set+0x102/0x330 led_classdev_unregister+0x4b/0x110 release_nodes+0x3d/0xb0 devres_release_all+0x8b/0xc0 device_del+0x34f/0x3c0 unregister_netdevice_many_notify+0x80b/0xaf0 unregister_netdev+0x7c/0xd0 igc_remove+0xd8/0x1e0 [igc] pci_device_remove+0x3f/0xb0 Fixes: ea578703b03d ("igc: Add support for LEDs on i225/i226") Reported-by: Roman Lozko <lozko.roma@gmail.com> Closes: https://lore.kernel.org/r/CAEhC_B=ksywxCG_+aQqXUrGEgKq+4mqnSV8EBHOKbC3-Obj9+Q@mail.gmail.com/ Reported-by: "Marek Marczykowski-Górecki" <marmarek@invisiblethingslab.com> Closes: https://lore.kernel.org/r/ZhRD3cOtz5i-61PB@mail-itl/ Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Kurt Kanzenbach <kurt@linutronix.de> # Intel i225 Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240422204503.225448-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-24Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== ice: Support 5 layer Tx scheduler topology Mateusz Polchlopek says: For performance reasons there is a need to have support for selectable Tx scheduler topology. Currently firmware supports only the default 9-layer and 5-layer topology. This patch series enables switch from default to 5-layer topology, if user decides to opt-in. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: Document tx_scheduling_layers parameter ice: Add tx_scheduling_layers devlink param ice: Enable switching default Tx scheduler topology ice: Adjust the VSI/Aggregator layers ice: Support 5 layer topology devlink: extend devlink_param *set pointer ==================== Link: https://lore.kernel.org/r/20240422203913.225151-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-24octeontx2-pf: flower: check for unsupported control flagsAsbjørn Sloth Tønnesen
Use flow_rule_is_supp_control_flags() to reject filters with unsupported control flags. In case any unsupported control flags are masked, flow_rule_is_supp_control_flags() sets a NL extended error message, and we return -EOPNOTSUPP. Remove FLOW_DIS_FIRST_FRAG specific error message, and treat it as any other unsupported control flag. Only compile-tested. Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Sunil Goutham <sgoutham@marvell.com> Link: https://lore.kernel.org/r/20240422152735.175693-1-ast@fiberby.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-24net: hns3: flower: validate control flagsAsbjørn Sloth Tønnesen
This driver currently doesn't support any control flags. Use flow_rule_has_control_flags() to check for control flags, such as can be set through `tc flower ... ip_flags frag`. In case any control flags are masked, flow_rule_has_control_flags() sets a NL extended error message, and we return -EOPNOTSUPP. Also propagate extack to hclge_get_cls_key_ip(), and convert it to return error code. Only compile-tested. Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Tested-by: Jijie Shao <shaojijie@huawei.com> Link: https://lore.kernel.org/r/20240422152717.175659-1-ast@fiberby.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-24net: ethernet: ti: cpsw: flower: validate control flagsAsbjørn Sloth Tønnesen
This driver currently doesn't support any control flags. Use flow_rule_match_has_control_flags() to check for control flags, such as can be set through `tc flower ... ip_flags frag`. In case any control flags are masked, flow_rule_match_has_control_flags() sets a NL extended error message, and we return -EOPNOTSUPP. Only compile-tested. Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240422152656.175627-1-ast@fiberby.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-24net: ethernet: ti: am65-cpsw: flower: validate control flagsAsbjørn Sloth Tønnesen
This driver currently doesn't support any control flags. Use flow_rule_match_has_control_flags() to check for control flags, such as can be set through `tc flower ... ip_flags frag`. In case any control flags are masked, flow_rule_match_has_control_flags() sets a NL extended error message, and we return -EOPNOTSUPP. Only compile-tested. Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240422152643.175592-1-ast@fiberby.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-24bnxt_en: flower: validate control flagsAsbjørn Sloth Tønnesen
This driver currently doesn't support any control flags. Use flow_rule_match_has_control_flags() to check for control flags, such as can be set through `tc flower ... ip_flags frag`. In case any control flags are masked, flow_rule_match_has_control_flags() sets a NL extended error message, and we return -EOPNOTSUPP. Only compile-tested. Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Tested-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Link: https://lore.kernel.org/r/20240422152626.175569-1-ast@fiberby.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-24net: ethernet: ti: am65-cpsw-nuss: Enable SGMII mode for J784S4 CPSW9GChintan Vankar
TI's J784S4 SoC supports SGMII mode with CPSW9G instance of the CPSW Ethernet Switch. Thus, enable it by adding SGMII mode to the extra_modes member of the "j784s4_cpswxg_pdata" SoC data. Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Chintan Vankar <c-vankar@ti.com> Link: https://lore.kernel.org/r/20240422124515.887511-1-c-vankar@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-24Revert "net: txgbe: fix clk_name exceed MAX_DEV_ID limits"Duanqiang Wen
This reverts commit e30cef001da259e8df354b813015d0e5acc08740. commit 99f4570cfba1 ("clkdev: Update clkdev id usage to allow for longer names") can fix clk_name exceed MAX_DEV_ID limits, so this commit is meaningless. Signed-off-by: Duanqiang Wen <duanqiangwen@net-swift.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240422084109.3201-2-duanqiangwen@net-swift.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-24Revert "net: txgbe: fix i2c dev name cannot match clkdev"Duanqiang Wen
This reverts commit c644920ce9220d83e070f575a4df711741c07f07. when register i2c dev, txgbe shorten "i2c_designware" to "i2c_dw", will cause this i2c dev can't match platfom driver i2c_designware_platform. Signed-off-by: Duanqiang Wen <duanqiangwen@net-swift.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240422084109.3201-1-duanqiangwen@net-swift.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-24Merge branch 'mlxsw-various-acl-fixes'Jakub Kicinski
Petr Machata says: ==================== mlxsw: Various ACL fixes Ido Schimmel writes: Fix various problems in the ACL (i.e., flower offload) code. See the commit messages for more details. ==================== Link: https://lore.kernel.org/r/cover.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-24mlxsw: spectrum_acl_tcam: Fix memory leak when canceling rehash workIdo Schimmel
The rehash delayed work is rescheduled with a delay if the number of credits at end of the work is not negative as supposedly it means that the migration ended. Otherwise, it is rescheduled immediately. After "mlxsw: spectrum_acl_tcam: Fix possible use-after-free during rehash" the above is no longer accurate as a non-negative number of credits is no longer indicative of the migration being done. It can also happen if the work encountered an error in which case the migration will resume the next time the work is scheduled. The significance of the above is that it is possible for the work to be pending and associated with hints that were allocated when the migration started. This leads to the hints being leaked [1] when the work is canceled while pending as part of ACL region dismantle. Fix by freeing the hints if hints are associated with a work that was canceled while pending. Blame the original commit since the reliance on not having a pending work associated with hints is fragile. [1] unreferenced object 0xffff88810e7c3000 (size 256): comm "kworker/0:16", pid 176, jiffies 4295460353 hex dump (first 32 bytes): 00 30 95 11 81 88 ff ff 61 00 00 00 00 00 00 80 .0......a....... 00 00 61 00 40 00 00 00 00 00 00 00 04 00 00 00 ..a.@........... backtrace (crc 2544ddb9): [<00000000cf8cfab3>] kmalloc_trace+0x23f/0x2a0 [<000000004d9a1ad9>] objagg_hints_get+0x42/0x390 [<000000000b143cf3>] mlxsw_sp_acl_erp_rehash_hints_get+0xca/0x400 [<0000000059bdb60a>] mlxsw_sp_acl_tcam_vregion_rehash_work+0x868/0x1160 [<00000000e81fd734>] process_one_work+0x59c/0xf20 [<00000000ceee9e81>] worker_thread+0x799/0x12c0 [<00000000bda6fe39>] kthread+0x246/0x300 [<0000000070056d23>] ret_from_fork+0x34/0x70 [<00000000dea2b93e>] ret_from_fork_asm+0x1a/0x30 Fixes: c9c9af91f1d9 ("mlxsw: spectrum_acl: Allow to interrupt/continue rehash work") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/0cc12ebb07c4d4c41a1265ee2c28b392ff997a86.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-24mlxsw: spectrum_acl_tcam: Fix incorrect list API usageIdo Schimmel
Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 #39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 6f9579d4e302 ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/4628e9a22d1d84818e28310abbbc498e7bc31bc9.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-24mlxsw: spectrum_acl_tcam: Fix warning during rehashIdo Schimmel
As previously explained, the rehash delayed work migrates filters from one region to another. This is done by iterating over all chunks (all the filters with the same priority) in the region and in each chunk iterating over all the filters. When the work runs out of credits it stores the current chunk and entry as markers in the per-work context so that it would know where to resume the migration from the next time the work is scheduled. Upon error, the chunk marker is reset to NULL, but without resetting the entry markers despite being relative to it. This can result in migration being resumed from an entry that does not belong to the chunk being migrated. In turn, this will eventually lead to a chunk being iterated over as if it is an entry. Because of how the two structures happen to be defined, this does not lead to KASAN splats, but to warnings such as [1]. Fix by creating a helper that resets all the markers and call it from all the places the currently only reset the chunk marker. For good measures also call it when starting a completely new rehash. Add a warning to avoid future cases. [1] WARNING: CPU: 7 PID: 1076 at drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_keys.c:407 mlxsw_afk_encode+0x242/0x2f0 Modules linked in: CPU: 7 PID: 1076 Comm: kworker/7:24 Tainted: G W 6.9.0-rc3-custom-00880-g29e61d91b77b #29 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_afk_encode+0x242/0x2f0 [...] Call Trace: <TASK> mlxsw_sp_acl_atcam_entry_add+0xd9/0x3c0 mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x109/0x290 mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x470 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 </TASK> Fixes: 6f9579d4e302 ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/cc17eed86b41dd829d39b07906fec074a9ce580e.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-24mlxsw: spectrum_acl_tcam: Fix memory leak during rehashIdo Schimmel
The rehash delayed work migrates filters from one region to another. This is done by iterating over all chunks (all the filters with the same priority) in the region and in each chunk iterating over all the filters. If the migration fails, the code tries to migrate the filters back to the old region. However, the rollback itself can also fail in which case another migration will be erroneously performed. Besides the fact that this ping pong is not a very good idea, it also creates a problem. Each virtual chunk references two chunks: The currently used one ('vchunk->chunk') and a backup ('vchunk->chunk2'). During migration the first holds the chunk we want to migrate filters to and the second holds the chunk we are migrating filters from. The code currently assumes - but does not verify - that the backup chunk does not exist (NULL) if the currently used chunk does not reference the target region. This assumption breaks when we are trying to rollback a rollback, resulting in the backup chunk being overwritten and leaked [1]. Fix by not rolling back a failed rollback and add a warning to avoid future cases. [1] WARNING: CPU: 5 PID: 1063 at lib/parman.c:291 parman_destroy+0x17/0x20 Modules linked in: CPU: 5 PID: 1063 Comm: kworker/5:11 Tainted: G W 6.9.0-rc2-custom-00784-gc6a05c468a0b #14 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:parman_destroy+0x17/0x20 [...] Call Trace: <TASK> mlxsw_sp_acl_atcam_region_fini+0x19/0x60 mlxsw_sp_acl_tcam_region_destroy+0x49/0xf0 mlxsw_sp_acl_tcam_vregion_rehash_work+0x1f1/0x470 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 843500518509 ("mlxsw: spectrum_acl: Do rollback as another call to mlxsw_sp_acl_tcam_vchunk_migrate_all()") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/d5edd4f4503934186ae5cfe268503b16345b4e0f.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-16 14:13:17 +0000