summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-03-20drm/amdgpu: Do a basic health check before resetLijo Lazar
Check if the device is present in the bus before trying to recover. It could be that device itself is lost from the bus in some hang situations. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Add comments to v_total calculation and drop legacy TODORodrigo Siqueira
[WHY & HOW] This commit just adds some simple comments to help understand the calculation of V total duration for Freesync. Also, remove a legacy TODO comment from link service type. Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Update DMUB flags and definitionsAnthony Koo
[WHAT] - Update replay residency tracing design to support more types including tracking PHY and ALPM residency types - Add commands for Replay frame update count profiling - Enhance HWFQ with additional flags to allow for more optimized IPS low power state residencies - Add new flag to indicate if a new frame update needed for ABM to ramp up into steady state Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu: add the sensor value of VCN activityXiaojian Du
This will add the sensor value of VCN activity for some ASICs. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Refactor DPP into a component directoryRevalla Hari Krishna
[WHY & HOW] Move all dpp files to a new dpp directory. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Revalla Hari Krishna <harikrishna.revalla@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Add debug counters to IPS exit printsNicholas Kazlauskas
[WHY] To have a log of the entry/exit counters in case the system hangs to measure stability. [HOW] Read them from firmware state and pass them to the prints. Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Guard cursor idle reallow by DC debug optionNicholas Kazlauskas
[WHY] To control whether idle optimizations reallowed after the first cursor update. [HOW] Add checks to the conditions. Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Add guards for idle on reg read/writeNicholas Kazlauskas
[WHY] If DCN is in idle then we should not be accessing DCN registers or it can lead to hangs. [HOW] Log the error and return 0 or drop the write if it's in idle. This is skipped in the exit sequence itself since the boolean flips before it starts. It also does not cover accesses from external clients outside of DM/DC like firmware or the kernel mode driver. Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu: cleanup unused variableShashank Sharma
This patch removes an unused input variable in the MES doorbell function. Cc: Christian König <Christian.Koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <Christian.Koenig@amd.com> Signed-off-by: Shashank Sharma <shashank.sharma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Fix potential index out of bounds in color transformation ↵Srinivasan Shanmugam
function Fixes index out of bounds issue in the color transformation function. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds, an error message is logged and the function returns false to indicate an error. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:405 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:406 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:407 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max Fixes: b629596072e5 ("drm/amd/display: Build unity lut for shaper") Cc: Vitaly Prosyak <vitaly.prosyak@amd.com> Cc: Charlene Liu <Charlene.Liu@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Support long vblank featureRobin Chen
[WHY] We want to support low hz case, but the original vtotal/vtotal_min/vtotal_max can't support more than 0x7FFF. [HOW] We use the 2 HW reg to contorl long vblank case. 1. OTG_V_COUNT_STOP_CONTROL -> vcount_stop 2. OTG_V_COUNT_STOP_CONTROL2 -> vcount_stop_timer vcount_stop define from which line we stop using vcount and start using vcount2. vcount_stop_timer define how long we use vcount2. Ex: Vtotal = 7 OTG_V_COUNT_STOP_CONTROL = 4 OTG_V_COUNT_STOP_CONTROL2 = 5 time : 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 vcount : 0, 1, 2, 3, - - - - - 4, 5, 6 vcount2 : 0, 1, 2, 3, 4, Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: ChunTao Tso <chuntao.tso@amd.com> Signed-off-by: Robin Chen<robin.chen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: 3.2.274Aric Cyr
- Change default size for dummy plane in DML2 - Enable DML2 debug flags - Add some forward declarations - Add DML2 folder to include path - Set DCN351 BB and IP the same as DCN35 - Override min required DCFCLK in dml1_validate - Fix function banner for amdgpu_dm_psr_disable_all() - Allow dirty rects to be sent to dmub when abm is active - Add debug key to allow disabling dtbclk - Add debug prints for IPS testing - Exit idle optimizations before HDCP execution - Add entry and exit counters Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Add entry and exit countersAnthony Koo
[WHY & HOW] Add new counters in the shared IPS firmware state. Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Add debug prints for IPS testingNicholas Kazlauskas
[WHY] To log commit states and when we transition in/out of allow and idle states and the caller. [HOW] Add a new logging helper and wrap idle optimization calls to receive the caller. Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Add debug key to allow disabling dtbclkMuhammad Ahmed
[HOW] Add debug key to allow disabling dtbclk Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu: skip GFX FED error in page fault handlingTao Zhou
Let kfd interrupt handler process it. v2: return 0 instead of 1 for fed error. drop the usage of strcmp in interrupt handler. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu: retire gfx ras query_utcl2_poison_statusTao Zhou
Replace it with related interface in gfxhub functions. v2: replace node id with xcc id. get node id for query_utcl2_poison_status Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu: add ring buffer information in devcoredumpSunil Khatri
Add relevant ringbuffer information such as rptr, wptr,rb mask, ring name, ring size and also the rings content for each ring on a gpu reset. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Fix function banner for amdgpu_dm_psr_disable_all()Roman Li
[WHY] Incorrect function name in function banner. [HOW] Correct name and brief description. Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu: add vm fault information to devcoredumpSunil Khatri
Add page fault information to the devcoredump. Output of devcoredump: **** AMDGPU Device Coredump **** version: 1 kernel: 6.7.0-amd-staging-drm-next module: amdgpu time: 29.725011811 process_name: soft_recovery_p PID: 1720 Ring timed out details IP Type: 0 Ring Name: gfx_0.0.0 [gfxhub] Page fault observed Faulty page starting at address: 0x0000000000000000 Protection fault status register: 0x301031 VRAM is lost due to GPU reset! Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu: add utcl2 poison query for gfxhubTao Zhou
Implement it for gfxhub 1.0 and 1.2. v2: input logical xcc id for poison query interface. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu: add new bit definitions for GC 9.0 PROTECTION_FAULT_STATUSTao Zhou
Add UCE and FED bit definitions. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Add DML2 folder to include pathAurabindo Pillai
Add DML2 compilation rule in the Makefile. Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu: add recent pagefault info in vm_managerSunil Khatri
Currently page fault information is stored per vm and which could be freed or stale during reset. Add it pagefault information in the vm_manager which is a global space for vm's and remains valid across. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Add some forward declarationsAurabindo Pillai
[WHAT] Add DML2 pipe and config struct forward declaration as a preparation for DML2. Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Revert Add left edge pixel + ODM pipe splitGabe Teeger
This reverts commit e2fdd5c5257d ("drm/amd/display: Add left edge pixel for YCbCr422/420 + ODM pipe split") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: George Shen <george.shen@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Gabe Teeger <gabe.teeger@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Add left edge pixel for YCbCr422/420 + ODM pipe splitGeorge Shen
[WHY] Currently 3-tap chroma subsampling is used for YCbCr422/420. When ODM pipesplit is used, pixels on the left edge of ODM slices need one extra pixel from the right edge of the previous slice to calculate the correct chroma value. Without this change, the chroma value is slightly different than expected. This is usually imperceptible visually, but it impacts test pattern CRCs for compliance test automation. [HOW] Update logic to use the register for adding extra left edge pixel for YCbCr422/420 ODM cases. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: revert Exit idle optimizations before HDCP executionMartin Leung
why and how: causes black screen on PNP on DCN 3.5 This reverts commit f30a3bea92bd ("drm/amd/display: Exit idle optimizations before HDCP execution") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Martin Leung <martin.leung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Exit idle optimizations before HDCP executionNicholas Kazlauskas
[WHY] PSP can access DCN registers during command submission and we need to ensure that DCN is not in PG before doing so. [HOW] Add a callback to DM to lock and notify DC for idle optimization exit. It can't be DC directly because of a potential race condition with the link protection thread and the rest of DM operation. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu/pm: Don't use OD table on ArcturusMa Jun
OD is not supported on Arcturus, so the OD table should not be used. Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu: drop setting buffer funcs in sdma442Le Ma
To fix the entity rq NULL issue. This setting has been moved to upper level. Fixes: b70438004a14 ("drm/amdgpu: move buffer funcs setting up a level") Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Fix noise issue on HDMI AV muteLeo Ma
[Why] When mode switching is triggered there is momentary noise visible on some HDMI TV or displays. [How] Wait for 2 frames to make sure we have enough time to send out AV mute and sink receives a full frame. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Leo Ma <hanghong.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Revert Remove pixle rate limit for subvpWenjing Liu
This reverts commit 340383c734f8 ("drm/amd/display: Remove pixle rate limit for subvp") [why] The original commit causes a regression when subvp is applied on ODM required 8k60hz timing. The display shows black screen on boot. The issue can be recovered with hotplug. It also causes MPO to fail. We will temprarily revert this commit and investigate the root cause further. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20Revert "drm/amdgpu/vpe: don't emit cond exec command under collaborate mode"Lang Yu
Ready now. Remove this workaround. This reverts commit d40f6213b52c161fd4634933acbc32103a283363. Signed-off-by: Lang Yu <Lang.Yu@amd.com> Tested-by: Alan Liu <haoping.liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20Revert "drm/amd/amdgpu: Fix potential ioremap() memory leaks in ↵Ma Jun
amdgpu_device_init()" This patch causes the following iounmap erorr and calltrace iounmap: bad address 00000000d0b3631f The original patch was unjustified because amdgpu_device_fini_sw() will always cleanup the rmmio mapping. This reverts commit eb4f139888f636614dab3bcce97ff61cefc4b3a7. Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Add a dc_state NULL check in dc_state_releaseAllen Pan
[How] Check wheather state is NULL before releasing it. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Allen Pan <allen.pan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Return the correct HDCP error codeRodrigo Siqueira
[WHY & HOW] If the display is null when creating an HDCP session, return a proper error code. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Implement wait_for_odm_update_pending_completeWenjing Liu
[WHY] Odm update is doubled buffered. We need to wait for ODM update to be completed before optimizing bandwidth or programming new udpates. [HOW] implement wait_for_odm_update_pending_complete function to wait for: 1. odm configuration update is no longer pending in timing generator. 2. no pending dpg pattern update for each active OPP. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Lock all enabled otg pipes even with no planesWenjing Liu
[WHY] On DCN32 we support dynamic ODM even when OTG is blanked. When ODM configuration is dynamically changed and the OTG is on blank pattern, we will need to reprogram OPP's test pattern based on new ODM configuration. Therefore we need to lock the OTG pipe to avoid temporary corruption when we are reprogramming OPP blank patterns. [HOW] Add a new interdependent update lock implementation to lock all enabled OTG pipes even when there is no plane on the OTG for DCN32. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Amend coasting vtotal for replay low hzChunTao Tso
[WHY] The original coasting vtotal is 2 bytes, and it need to be amended to 4 bytes because low hz case. [HOW] Amend coasting vtotal from 2 bytes to 4 bytes. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: ChunTao Tso <chuntao.tso@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Fix idle check for shared firmware stateNicholas Kazlauskas
[WHY] We still had an instance of get_idle_state checking the PMFW scratch register instead of the actual idle allow signal. [HOW] Replace it with the SW state check for whether we had allowed idle through notify_idle. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Update odm when ODM combine is changed on an otg master ↵Wenjing Liu
pipe with no plane [WHY] When committing an update with ODM combine change when the plane is removing or already removed, we fail to detect odm change in pipe update flags. This has caused mismatch between new dc state and the actual hardware state, because we missed odm programming. [HOW] - Detect odm change even for otg master pipe without a plane. - Update odm config before calling program pipes for pipe with planes. The commit also updates blank pattern programming when odm is changed without plane. This is because number of OPP is changed when ODM combine is changed. Blank pattern is per OPP so we will need to reprogram OPP based on the new pipe topology. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Init DPPCLK from SMU on dcn32Dillon Varone
[WHY & HOW] DPPCLK ranges should be obtained from the SMU when available. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Add monitor patch for specific eDPRyan Lin
[WHY] Some eDP panels' ext caps don't write initial values. The value of dpcd_addr (0x317) can be random and the backlight control interface will be incorrect. [HOW] Add new panel patches to remove sink ext caps. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.5.x Cc: Tsung-hua Lin <tsung-hua.lin@amd.com> Cc: Chris Chi <moukong.chi@amd.com> Reviewed-by: Wayne Lin <wayne.lin@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ryan Lin <tsung-hua.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Allow dirty rects to be sent to dmub when abm is activeJosip Pavic
[WHY] It's beneficial for ABM to know when new frame data are available. [HOW] Add new condition to allow dirty rects to be sent to DMUB when ABM is active. ABM will use this as a signal that a new frame has arrived. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Anthony Koo <anthony.koo@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Josip Pavic <josip.pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Override min required DCFCLK in dml1_validateSohaib Nadeem
[WHY]: Increasing min DCFCLK addresses underflow issues that occur when phantom pipe is turned on for some Sub-Viewport configs [HOW]: dcn32_override_min_req_dcfclk is added to override DCFCLK value in dml1_validate when subviewport is being used. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Sohaib Nadeem <sohaib.nadeem@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu: Bypass display ta if display hw is not availableHawking Zhang
Do not load/invoke display TA if display hardware is not available. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu: correct the KGQ fallback messagePrike Liang
Fix the KGQ fallback function name, as this will help differentiate the failure in the KCQ enablement. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu/pm: Check the validity of overdiver power limitMa Jun
Check the validity of overdriver power limit before using it. Fixes: 7968e9748fbb ("drm/amdgpu/pm: Fix the power1_min_cap value") Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Suggested-by: Lazar Lijo <lijo.lazar@amd.com> Suggested-by: Alex Deucher <Alexander.Deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-03-20drm/amdgpu/pm: Fix NULL pointer dereference when get power limitMa Jun
Because powerplay_table initialization is skipped under sriov case, We check and set default lower and upper OD value if powerplay_table is NULL. Fixes: 7968e9748fbb ("drm/amdgpu/pm: Fix the power1_min_cap value") Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reported-by: Yin Zhenguo <zhenguo.yin@amd.com> Suggested-by: Lazar Lijo <lijo.lazar@amd.com> Suggested-by: Alex Deucher <Alexander.Deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
generated by cgit (git 2.34.1) at 2025-07-15 23:30:57 +0000