summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-02-20MIPS: OCTEON: irq: add CIB and other fixesDavid Daney
- Use of_irq_init() to initialize interrupt controllers - Get rid of some unlikely() - Add CIB to support SATA and other interrupts - Add support for CIU SUM2 interrupt sources Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Leonid Rosenboim <lrosenboim@caviumnetworks.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Signed-off-by: Peter Swain <peter.swain@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8947/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: OCTEON: Don't do acknowledge operations for level triggered irqs.David Daney
The acknowledge bits don't exist for level triggered irqs, so setting them causes the simulator to terminate. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Leonid Rosenboim <lrosenboim@caviumnetworks.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8946/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: OCTEON: More OCTEONIII supportChandrakala Chavva
Read clock rate from the correct CSR. Don't clear COP0_DCACHE for OCTEONIII. Signed-off-by: Chandrakala Chavva <cchavva@caviumnetworks.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8945/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: OCTEON: Remove setting of processor specific CVMCTL icache bits.Chad Reese
CN38XX pass 1 required icache prefetching to be turned off. This chip never reached production and is long dead. Other processor specific icache settings are done by the bootloader. Remove these bits from the kernel. Signed-off-by: Chad Reese <kreese@caviumnetworks.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: David Daney <david.daney@cavium.com> Patchwork: https://patchwork.linux-mips.org/patch/8944/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: OCTEON: Core-15169 Workaround and general CVMSEG cleanup.David Daney
Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8943/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: OCTEON: Update octeon-model.h code for new SoCs.David Daney
Add coverage for OCTEON III models. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8942/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: OCTEON: Implement DCache errata workaround for all CN6XXXDavid Daney
Make messages refer to all CN6XXX. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8941/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: OCTEON: Add little-endian support to asm/octeon/octeon.hDavid Daney
Also update union octeon_cvmemctl with new OCTEON II fields. [aleksey.makarov@auriga.com: use __BITFIELD_FIELD] Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8940/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: OCTEON: Implement the core-16057 workaroundDavid Daney
Disable ICache prefetch for certian Octeon II processors. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8938/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: OCTEON: Delete unused COP2 saving codeAleksey Makarov
Commit 2c952e06e4f5 ("MIPS: Move cop2 save/restore to switch_to()") removes assembler code to store COP2 registers. Commit a36d8225bceb ("MIPS: OCTEON: Enable use of FPU") mistakenly restores it Fixes: a36d8225bceb ("MIPS: OCTEON: Enable use of FPU") Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: David Daney <david.daney@cavium.com> Patchwork: https://patchwork.linux-mips.org/patch/8937/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: OCTEON: Use correct instruction to read 64-bit COP0 registerChandrakala Chavva
Use dmfc0/dmtc0 instructions for reading CvmMemCtl COP0 register, its a 64-bit wide. Signed-off-by: Chandrakala Chavva <cchavva@caviumnetworks.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: David Daney <david.daney@cavium.com> Patchwork: https://patchwork.linux-mips.org/patch/8936/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: OCTEON: Save and restore CP2 SHA3 stateDavid Daney
Allocate new save space, and then save/restore the registers if OCTEON III. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8935/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: OCTEON: Fix FP context save.David Daney
It wasn't being saved on task switch. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8934/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: OCTEON: Save/Restore wider multiply registers in OCTEON III CPUsDavid Daney
The wide multiplier is twice as wide, so we need to save twice as much state. Detect the multiplier type (CPU type) at start up and install model specific handlers. [aleksey.makarov@auriga.com: conflict resolution, support for old compilers] Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Leonid Rosenboim <lrosenboim@caviumnetworks.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8933/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20thermal: exynos: fix: Check if data->tmu_read callback is present before readLukasz Majewski
The exynos_tmu_data() function should on entrance test not only for valid data pointer, but also for data->tmu_read one. It is important, since afterwards it is dereferenced to get temperature code. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-02-20MIPS: boot: Provide more uImage optionsMarkos Chandras
Allow more compression algorithms as well as uncompressed uImage.bin to be generated. An uncompressed image might be useful to rule out problems in the decompression code in the bootloader or even speed up the boot process at the expense of a bigger uImage file. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9271/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: Remove unneeded #ifdef __KERNEL__ from asm/processor.hDavid Daney
Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8737/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: ip22-gio: Remove legacy suspend/resume supportLars-Peter Clausen
There are currently no gio device drivers that implement suspend/resume and this patch removes the bus specific legacy suspend and resume callbacks. This will allow us to eventually remove struct bus_type legacy suspend and resume support altogether. gio device drivers wanting to implement suspend and resume can use dev PM ops which will work out of the box without further modifications necessary. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8920/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20mips: pci: Add ifdef around pci_proc_domainZubair Lutfullah Kakakhel
Without these, there are multiple definitions of pci_proc_domain() and pci_domain_nr() if linux/pci.h and asm/pci.h are included. Add #ifdefs around them Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Reviewed-by: Markos Chandras <Markos.Chandras@imgtec.com> Cc: Markos.Chandras@imgtec.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8670/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: Alchemy: Fix cpu clock calculationManuel Lauss
The current code uses bits 0-6 of the sys_cpupll register to calculate core clock speed. However this is only valid on Au1300, on all earlier models the hardware only uses bits 0-5 to generate core clock. This fixes clock calculation on the MTX1 (Au1500), where bit 6 of cpupll is set as well, which ultimately lead the code to calculate a bogus cpu core clock and also uart base clock down the line. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Reported-by: John Crispin <blogic@openwrt.org> Tested-by: Bruno Randolf <br1@einfach.org> Cc: stable@vger.kernel.org [v3.17+] Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/9279/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: Alchemy: remove declaration for set_cpuspecManuel Lauss
set_cpuspec() has been dropped with commit 074cf656700ddd1d2bd7f815f78e785418beb898 ("MIPS: Alchemy: remove cpu_table.") in late 2008. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/9150/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: Alchemy: preset loops_per_jiffy based on CPU clockManuel Lauss
This was lost during the rewrite of clock framework support. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/9149/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: Alchemy: fix Au1000/Au1500 LRCLK calculationManuel Lauss
The Au1000 and Au1500 calculate the LRCLK a bit differently than newer models: a single bit in MEM_STCFG0 selects if pclk is divided by 4 or 5. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/9148/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: Add set/clear CP0 macros for PageGrain registerSteven J. Hill
Build set and clear macros for the PageGrain register. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9289/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20ARM: 8305/1: DMA: Fix kzalloc flags in __iommu_alloc_buffer()Alexandre Courbot
There doesn't seem to be any valid reason to allocate the pages array with the same flags as the buffer itself. Doing so can eventually lead to the following safeguard in mm/slab.c's cache_grow() to be hit: if (unlikely(flags & GFP_SLAB_BUG_MASK)) { pr_emerg("gfp: %un", flags & GFP_SLAB_BUG_MASK); BUG(); } This happens when buffers are allocated with __GFP_DMA32 or __GFP_HIGHMEM. Fix this by allocating the pages array with GFP_KERNEL to follow what is done elsewhere in this file. Using GFP_KERNEL in __iommu_alloc_buffer() is safe because atomic allocations are handled by __iommu_alloc_atomic(). Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-02-20Merge branch 'overlayfs-next' of ↵Al Viro
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs into for-next
2015-02-20Infiniband: Fix potential NULL d_inode dereferenceDavid Howells
Code that does this: if (!(d_unhashed(tmp) && tmp->d_inode)) { ... simple_unlink(parent->d_inode, tmp); } is broken because: !(d_unhashed(tmp) && tmp->d_inode) is equivalent to: !d_unhashed(tmp) || !tmp->d_inode so it is possible to get into simple_unlink() with tmp->d_inode == NULL. simple_unlink(), however, assumes tmp->d_inode cannot be NULL. I think that what was meant is this: !d_unhashed(tmp) && tmp->d_inode and that the logical-not operator or the final close-bracket was misplaced. Signed-off-by: David Howells <dhowells@redhat.com> cc: Bryan O'Sullivan <bos@pathscale.com> cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-20posix_acl: fix reference leaks in posix_acl_createOmar Sandoval
get_acl gets a reference which we must release in the error cases. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Omar Sandoval <osandov@osandov.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-20autofs4: Wrong format for printing dentryRasmus Villemoes
%pD for struct file*, %pd for struct dentry*. Fixes: a455589f181e ("assorted conversions to %p[dD]") Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-20coredump: Fix typo in commentBastien Nocera
Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-20fs/aio.c: Remove duplicate function name in pr_debug messagesKinglong Mee
Have defined pr_fmt as below in fs/aio.c, so remove duplicate function name in pr_debug message. #define pr_fmt(fmt) "%s: " fmt, __func__ Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-20configfs: Fix potential NULL d_inode dereferenceDavid Howells
Code that does this: if (!(d_unhashed(dentry) && dentry->d_inode)) { ... simple_unlink(parent->d_inode, dentry); } is broken because: !(d_unhashed(dentry) && dentry->d_inode) is equivalent to: !d_unhashed(dentry) || !dentry->d_inode so it is possible to get into simple_unlink() with dentry->d_inode == NULL. simple_unlink(), however, assumes dentry->d_inode cannot be NULL. I think that what was meant is this: !d_unhashed(dentry) && dentry->d_inode and that the logical-not operator or the final close-bracket was misplaced. Signed-off-by: David Howells <dhowells@redhat.com> cc: Joel Becker <joel.becker@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-20hypfs: switch to read_iter/write_iterAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-20x86/mm/ASLR: Avoid PAGE_SIZE redefinition for UML subarchJiri Kosina
Commit f47233c2d34 ("x86/mm/ASLR: Propagate base load address calculation") causes PAGE_SIZE redefinition warnings for UML subarch builds. This is caused by added includes that were leftovers from previous patch versions are are not actually needed (especially page_types.h inlcude in module.c). Drop those stray includes. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@suse.de> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Kees Cook <keescook@chromium.org> Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1502201017240.28769@pobox.suse.cz Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-20don't bother with most of the bad_file_ops methodsAl Viro
Only ->open() should be there (always failing, of course). We never replace ->f_op of an already opened struct file, so there's no way for any of those methods to be called. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-19clk: Only recalculate the rate if neededTomeu Vizoso
We don't really need to recalculate the effective rate of a clock when a per-user clock is removed, if the constraints of the later aren't limiting the requested rate. This was causing problems with clocks that never had a rate set before, as rate_req would be zero. Though this could be considered a bug in the implementation of those clocks, this should be checked somewhere else. Fixes: 1c8e600440c7 ("clk: Add rate constraints to clocks") Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-02-19ipmi: Fix a memory ordering issueCorey Minyard
From a locking point of view it is safe to check waiting_msg without a lock, but there is a memory ordering issue that causes it to possibly not be set right when viewed from another processor. We are already claiming a lock right after that, move the check to inside the lock to enforce the memory ordering. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2015-02-19ipmi: Remove uses of return value of seq_printfJoe Perches
The seq_printf like functions will soon be changed to return void. Convert these uses to check seq_has_overflowed instead. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2015-02-19ipmi: Use is_visible callback for conditional sysfs entriesTakashi Iwai
Instead of manual calls of device_create_file() and device_remove_file(), implement the condition in is_visible callback for the attribute group and put these entries to the group, too. This simplifies the code and avoids the possible races. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2015-02-19ipmi: Free ipmi_recv_msg messages from the linked list on closeNicholas Krause
This adds a loop through the elements in the linked list, recv_msgs using list_for_entry_safe in order to free messages in this list. In addition we are using the safe version of this marco in order to prevent use after bugs related to deleting the element we are on currently by holding a pointer to the next element after the current one we are on and freeing with the function, ipmi_free_recv_msg internally in this loop. Signed-off-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2015-02-19ipmi: avoid gcc warningArnd Bergmann
A new harmless warning has come up on ARM builds with gcc-4.9: drivers/char/ipmi/ipmi_msghandler.c: In function 'smi_send.isra.11': include/linux/spinlock.h:372:95: warning: 'flags' may be used uninitialized in this function [-Wmaybe-uninitialized] raw_spin_unlock_irqrestore(&lock->rlock, flags); ^ drivers/char/ipmi/ipmi_msghandler.c:1490:16: note: 'flags' was declared here unsigned long flags; ^ This could be worked around by initializing the 'flags' variable, but it seems better to rework the code to avoid this. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 7ea0ed2b5be81 ("ipmi: Make the message handler easier to use for SMI interfaces") Signed-off-by: Corey Minyard <cminyard@mvista.com>
2015-02-19ipmi: Update timespec usage to timespec64John Stultz
As part of the internal y2038 cleanup, this patch removes timespec usage in the ipmi driver, replacing it timespec64 Cc: openipmi-developer@lists.sourceforge.net Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Corey Minyard <minyard@mvista.com>
2015-02-19ipmi: Cleanup DEBUG_TIMING ifdef usageJohn Stultz
The driver uses #ifdef DEBUG_TIMING in order to conditionally print out timestamped debug messages. Unfortunately it adds the ifdefs all over the usage sites. This patch cleans it up by adding a debug_timestamp() function which is compiled out if DEBUG_TIMING isn't present. This cleans up all the ugly ifdefs in the function logic. Cc: openipmi-developer@lists.sourceforge.net Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Corey Minyard <minyard@mvista.com>
2015-02-19drivers:char:ipmi: Remove unneeded FIXME comment in the file,ipmi_si_intf.cNicholas Krause
Removes a no longer needed FIXME comment in the function,acpi_gpe_irq_setup for the file,ipmi_si_intf.c. This comment is no longer needed as clearly we are passing the correct level of ACPI_GPE_LEVEL_TRIGGERED to the installer function,acpi_install_gpe_handler due to no breakage after years of using this ACPI level in the function,acpi_install_gpe_handler. Signed-off-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2015-02-19char: ipmi: Remove obsolete cleanup for clientdataWolfram Sang
A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit or error. This is obsolete meanwhile, the core will do it. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2015-02-19ipmi: Remove a FIXME for slab conversionCorey Minyard
There can't be more than a few IPMI messages allocated at any one time, so converting the messages to slabs would be a waste. So just remove the FIXME. Suggested-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2015-02-19Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull more thermal managament updates from Zhang Rui: "Specifics: - Exynos thermal driver refactoring. Several cleanups, code optimization, unused symbols removal, and unused feature removal in Exynos thermal driver. Thanks Lukasz for this effort. - Exynos thermal driver support to OF thermal. After the code refactoring, the driver earned the support to OF thermal. Chip thermal data were moved from driver code to DTS, reducing the code footprint. Thanks Lukasz for this. - After receiving the OF thermal support, the exynos thermal driver now must allow modular build. Thanks Arnd for detecting, reporting and fixing this. - Exynos thermal driver support to Exynos 7 SoC. Thanks Abhilash for this. - Accurate temperature reporting on Rockchip thermal driver, thanks to Caesar. - Fix on how OF thermal enables its zones, thanks Lukasz for fixing. - Fixes in OF thermal examples under Documentation/. Thanks Srinivas for fixing" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: exynos: Add TMU support for Exynos7 SoC dts: Documentation: Add documentation for Exynos7 SoC thermal bindings cpufreq: exynos: allow modular build thermal: Fix examples in DT documentation thermal: exynos: Correct sanity check at exynos_report_trigger() function thermal: Kconfig: Remove config for not used EXYNOS_THERMAL_CORE thermal: exynos: Remove exynos_tmu_data.c file thermal: rockchip: make temperature reporting much more accurate thermal: exynos: Remove exynos_thermal_common.[c|h] files thermal: samsung: core: Exynos TMU rework to use device tree for configuration dts: Documentation: Update exynos-thermal.txt example for Exynos5440 dts: Documentation: Extending documentation entry for exynos-thermal cpufreq: exynos: Use device tree to determine if cpufreq cooling should be registered thermal: exynos: Modify exynos thermal code to use device tree for cpu cooling configuration thermal: exynos: Provide thermal_exynos.h file to be included in device tree files thermal: exynos: cosmetic: Correct comment format thermal: of: Enable thermal_zoneX when sensor is correctly added
2015-02-19NVMe: Fix potential corruption on sync commandsKeith Busch
This makes all sync commands uninterruptible and schedules without timeout so the controller either has to post a completion or the timeout recovery fails the command. This fixes potential memory or data corruption from a command timing out too early or woken by a signal. Previously any DMA buffers mapped for that command would have been released even though we don't know what the controller is planning to do with those addresses. Signed-off-by: Keith Busch <keith.busch@intel.com>
2015-02-19NVMe: Remove unused variablesKeith Busch
We don't track queues in a llist, subscribe to hot-cpu notifications, or internally retry commands. Delete the unused artifacts. Signed-off-by: Keith Busch <keith.busch@intel.com>
2015-02-19NVMe: Fix scsi mode select llbaa settingKeith Busch
It should be a logical bitwise AND, not conditional. Signed-off-by: Keith Busch <keith.busch@intel.com>
generated by cgit (git 2.34.1) at 2025-07-15 23:54:13 +0000