summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-05-09wifi: iwlwifi: mld: avoid init-after-queueMiri Korenblit
rx_omi::finished_work is initialized when the containing link is. If the worker was queued and then an error happened, we will get to iwl_mld_init_link from the reconfig and initialize the work after it was queued. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-11-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: mld: use a radio/system specific power budgetBenjamin Berg
Different hardware has a different maximum power consumption and the BIOS can also define a power limit for the device. Add code to select an appropriate maximum power budget for the device and configure that instead of using a hardcoded table. This removes the old table. It does not work with the variable upper limit and the there should be no consumer that requires these exact step values. This considerably increases the power budget for some devices and can prevent throttling in high traffic situations. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-10-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: mvm: use a radio/system specific power budgetBenjamin Berg
Different hardware has a different maximum power consumption and the BIOS can also define a power limit for the device. Add code to select an appropriate maximum power budget for the device and configure that instead of using a hardcoded table. This removes the old table. It does not work with the variable upper limit and the there should be no consumer that requires these exact step values. This considerably increases the power budget for some devices and can prevent throttling in high traffic situations. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-9-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: fix thermal code compilation with -Werror=cast-qualBenjamin Berg
The compare_temps function in both mvm and mld dropped the const qualifier in a cast in a way that makes -Werror=cast-qual unhappy. Add the const to the cast to fix this. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-8-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: pcie: remove iwl_trans_pcie_gen2_send_hcmdMiri Korenblit
This function is not implemented nor called. Remove its declaration. Link: https://patch.msgid.link/20250506194102.3407967-7-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: Add support for a new version for link config commandYedidya Benshimol
Add support for a new version of link configuration command which includes NPCA and high priority TX traffic support for wifi8. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-6-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: Add a new version for mac config commandYedidya Benshimol
Add a new version of mac configuration command which includes UHR support indication. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-5-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: Add a new version for sta config commandYedidya Benshimol
Add a new version of sta configuration command which includes these wifi8 features: 1. LDPC X2 CW size support indication 2. Indication if ICF frame is needed instead of RTS 3. support for MIC padding delays for protected control frames Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-4-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: add range response version 10 supportAvraham Stern
Range response version 10 removes the rx and tx rates fields. These fields aren't used by the driver anyway, so no change is needed to support it. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-3-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: mld: remove one more error in unallocated BAIDMiri Korenblit
Since the FW is the one to assign an ID to a BA, it can happen that the FW sends a bar_frame_release_notif before the driver had the chance to allocate the BAID. Convert the IWL_FW_CHECK into a regular debug print. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-2-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-07wifi: iwlwifi: handle v3 ratesJohannes Berg
For UHR, a version 3 of the rate API is being added, which increases the number of bits used for MCSes by shifting the NSS bit up. Handle that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250505215513.84cde65a603f.Ic3119ef77cbc6461abd2a6bda104c0d236adcc8d@changeid Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-07wifi: iwlwifi: mld: add RFI_CONFIG_CMD to iwl_mld_system_names arrayPagadala Yesu Anjaneyulu
Add RFI_CONFIG_CMD into the names array to facilitate the display of this command name when sending it to the firmware. Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Reviewed-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com> Link: https://patch.msgid.link/20250505215513.da89484cb838.I755709232f5e441ca159bdc5a151bac73d9744d3@changeid Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-07wifi: iwlwifi: fix 6005N/SFF matchJohannes Berg
That mask should never have been 0xFFFF (mask also doesn't make sense in that case) but rather 0xF000 since I combined a few entries with 0xC___. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250505215513.63bdbd67b72d.Id9b93b695c91117967dfd339c76bdfcd2872bee6@changeid Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-07wifi: iwlwifi: make iwl_uefi_get_uats_table() return voidJohannes Berg
This sets both fwrt->uats_valid and returns 0, but in the static inline it returns 0 without setting uats_valid, which is confusing and the iwlmvm code misbehaves in this case. Since it already sets uats_valid, just remove the extra return value. Reported-by: Bjoern A. Zeeb <bz@FreeBSD.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250505215513.e981a7911228.Ic94b5e03e2053a08b84cabeb58ce3b6598fd9fc6@changeid Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-07wifi: iwlwifi: drop whtc RFEmmanuel Grumbach
This RF module is now a product. No need to support the test chip anymore. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250505215513.01fb866e7c38.I23611aa4abb8fd031a6d63a21f4b87b0d38a36a1@changeid Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-07wifi: iwlwifi: add support PE RFEmmanuel Grumbach
This is a new RF module and of course the firmware name for this new RF module is different. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250505215513.c3481b1a4124.Id94c680636be2f59c9172919c79d80a48c7d1322@changeid Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-07wifi: iwlwifi: debug: set CDB indication from CSRMiri Korenblit
In order to set the CDB indication in the dump meta data, we read it from a specific prph register. There is a known issue with that register in Xnj setups - in that case it will always indicate CDB. Instead of detecting the jacket case and then hardcode whether the CDB indication should or shouldn't be set (according the CRF), we can retrieve the CDB bit from the hw_rf_id (CSR_HW_RF_ID). There is also no reason to do it conditionally only for ax210 / BnJ. Cleanup the code a bit. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250505215513.ea542a6c189e.I3d8cf5103b3747dfdd89985b45b592e419f97b63@changeid Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-07wifi: iwlwifi: mvm: fix beacon CCK flagJohannes Berg
The beacon CCK flag should be set for any CCK rate, not just for 1 Mbps. Fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Link: https://patch.msgid.link/20250505215513.fe18b7d92d7d.I7bb40a92cea102677b695beb1e2a62a5ea72678b@changeid Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-07wifi: iwlwifi: remove NVM C step overrideJohannes Berg
This was used for debug/bringup of 8000 devices, to be able to unify between all 8000 devices with NVM override. However, this is really no longer used, those are ancient devices by now, so we can remove the logic. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250505215513.6210ac6cda09.I83cc3e68f0ed99a922d435c203fef840a28eb0de@changeid Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-07wifi: iwlwifi: dvm: init 'keep_alive_beacons' in power tablesJohannes Berg
These should be zero, but we might as well be explicit about it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250505215513.1e943bf696f4.Id2d7a413dc594c4525ac7ad0650ec8a50e1970ca@changeid Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-07wifi: iwlwifi: mld: add debugfs for using ptp clock time for monitor interfaceAvraham Stern
Add a debugfs option to use the ptp clock time for Rx device timestamps on a monitor interface. This can be useful for e.g. synchronizing multiple NICs or reporting the timestamp in the system clock instead of the GP2. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Link: https://patch.msgid.link/20250505215513.fffe6718fbca.I75f034005851a2d0c8ba5b015b9fdcad8a7c550d@changeid Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-07wifi: iwlwifi: pcie: log async commandsJohannes Berg
Currently, there are two log messages at INFO level for synchronous commands: Attempting to send sync command ... Setting HCMD_ACTIVE for command ... and unfortunately none at all for async ones. Add one for async commands as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250505215512.cc4457285889.I633fae8828e8a37bbebc578166f388dcf893f592@changeid Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-07wifi: iwlwifi: mld: don't check the TPT counters when scanningMiri Korenblit
If there is an ongoing scan that lasts long, the MPDU counters may not increase enough due the device being busy with scanning and not because we are in a low throughput scenario. In that case we don't want to block EMLSR. Instead, stop checking the counters from the moment we started scanning, and when the scan ends - clear the counters and schedule a check in 5 seconds, as usual. Note that this is only done for regular scan since MLO scan is too short to affect the counters, and scheduled scan is mainly used when we are not connected. Also note that we only stop checking whether to block EMLSR, and not if to unblock. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250505215512.330ea440d19c.Ib10dae0b7a0cb0e10c59a9edf5ff7af0f065ac60@changeid Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-07wifi: iwlwifi: print the DSM value when read from UEFIMiri Korenblit
We have such a print for ACPI, add one for UEFI. This is needed for testing Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250505215512.f419c18c064e.I870a4537a4bfa3c54b03ec7ec29bb246e6aa75cb@changeid Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-07wifi: iwlwifi: dvm: pair transport op-mode enter/leaveJohannes Berg
If there's a failure and the op-mode didn't actually fully initialize, it should leave the transport again. Fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250504132447.714c3517548b.I49557e7ba8c03be2b558cc9fb5efa2a9fbab890e@changeid
2025-05-07wifi: iwlwifi: tests: simplify devinfo_no_trans_cfg_dups()Johannes Berg
There's no need to build a list of individual configs first and then compare them, we can just go through all of them and compare if the pointers aren't the same. The complexity (in terms of number of comparisons) is a bit higher that way, but it's just a test and the code complexity is much lower without that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250504132447.85911c59d96a.I540f464229da3566d1726dfb61b46002fbb73bde@changeid
2025-05-07wifi: iwlwifi: cfg: use minimum API version 97 for Sc/DrJohannes Berg
For Sc 97 might get used (at least for now) and for Dr the older 96 won't get used. Change them both to 97. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250504132447.2ab49f2265ce.I45623943fdcac3462d96e54dbb7fdad68bdf3693@changeid
2025-05-07wifi: iwlwifi: tests: allow same config for different MACsJohannes Berg
For different MACs we maintain the configs in different files, and while it's a small waste of space, this is a worthwhile trade-off for maintenance and simplicity. So allow different MAC types to have the same config. This could allow the same config for two MACs in the same MAC family, but that's not hugely important. Also simplify the test to not build a config list, there's no good reason to do that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250504132447.27f5d570eb32.I1649309a0e54a1d446a38c5b2124a582de9f6d61@changeid
2025-05-07wifi: iwlwifi: bump FW API to 99 for BZ/SC/DR devicesMiri Korenblit
Start supporting API version 99 for those devices. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250504132447.677db25ce2c7.Ie4a7a00ff3562bfed1e8ac1fb42c1382cd24a486@changeid
2025-05-07wifi: iwlwifi: mvm: remove HT greenfield supportJohannes Berg
No hardware that uses iwlmvm actually supports HT greenfield. Remove the support and then clean up the v1 rate API by doing a conversion to v2 rate API, the only thing v1 covered that couldn't be done in v2 was HT greenfield. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250504132447.805ec090c61f.Iafd87f62ceb463b72f861a5348078999dcaace92@changeid
2025-05-07wifi: iwlwifi: mvm: don't report bad EHT rate to mac80211Johannes Berg
In EHT, we shouldn't report a legacy rate to mac80211, that might just be confusing. Set it to zero, since it's only really relevant for radiotap. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250504132447.325d7ba6905f.I3bdd8854e1a784856a4973ff4d532c74f992af00@changeid
2025-05-07wifi: iwlwifi: mld: don't report bad EHT rate to mac80211Johannes Berg
In EHT, we shouldn't report a legacy rate to mac80211, that might just be confusing. Set it to zero, since it's only really relevant for radiotap. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250504132447.8baf4efec182.Idc0cabf1919c05b35dc2341c08ea88a7157614c4@changeid
2025-05-07wifi: iwlwifi: mld: build HT/VHT injected rate in v2Johannes Berg
Instead of building the injected rate in version 1 of the format and then converting, build it in version 2 directly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250504132447.0e6e4ae4469f.Ib49eda9a3083b2e0f0bcaff08ad784e151978307@changeid
2025-05-07wifi: iwlwifi: rename modulation type valuesJohannes Berg
The modulation type values aren't masks, they're just values. Rename them from RATE_MCS_CCK_* to RATE_MCS_MOD_TYPE_*. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250504132447.aa79635dd4e6.Ie97a01fee1ef4aedf8a2e5447489793ce8c15ca0@changeid
2025-05-07wifi: iwlwifi: fw: remove RATE_MCS_NSS_POSJohannes Berg
We can use u32_{get,encode}_bits() instead of manual shifts and remove RATE_MCS_NSS_POS. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250504132447.b6da6048f8b8.Ib6d78ed6ffb7e99c42c2dd2ca4706a6bf73d3066@changeid
2025-05-07wifi: iwlwifi: remove sku_id from transJohannes Berg
This is ephemeral data that's passed from the alive response to the PNVM loading, so it doesn't need to be stored. Pass it around instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250504132447.fe8be4454007.I24824f35620b21fe49e9243818c7188e431af48e@changeid
2025-05-07wifi: iwlwifi: trans: move ext_32khz_clock_valid to configJohannes Berg
This value is used for the device start, so it's really part of the configuration. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250504132447.637ed7514587.I6c8fdeb3e2078a5fe9b755391e3ef7258ef2b279@changeid
2025-05-07wifi: iwlwifi: move STEP config into trans->confJohannes Berg
This really belongs there, it's needed early, so move it. Remove the related but dead iwl_trans_pcie_ctx_info_gen3_set_step() while at it. In iwlmld move the calls since they do part of the trans configuration. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250504132447.a4681ee11dd7.I6434a13d51932e984bb07695bc1cb931ebdcd27c@changeid
2025-05-07wifi: iwlwifi: rework transport configurationJohannes Berg
Instead of having a trans_configure method that copies all the data, just have the users set up the configuration in the transport directly. This simplifies the code on both sides. While doing so also move some value from the trans struct into the conf struct because they are configuration. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250504132447.e2a2535ecfd0.I21653103ff02afc5a4d97a41b68021f053985e37@changeid
2025-05-07wifi: iwlwifi: trans: collect device informationJohannes Berg
Add a new device information 'info' substruct to the transport that's const and can only be set by a special helper, and move some information there. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250503224232.cd80cb55403c.Ic18524b66d655fad734bf97192a54d9cfa9fdf1f@changeid
2025-05-07wifi: iwlwifi: trans: remove SCD base address validationJohannes Berg
We pass this parameter around a lot of places just to validate what the firmware told us against the hardware with a warning, which seems to never trigger. Remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250503224232.5405014d7f88.I3b74a1fd51a39c6df5674f2994189092d1635e7f@changeid
2025-05-07wifi: iwlfiwi: mvm: Fix the rate reportingIlan Peer
The rate validation in mac80211 considers a rate to be valid iff both the rate index and the count are positive. When the rate scaling is managed in the driver and not enough traffic passed to set the actual rate, the driver set the rate to be the optimal rate. However, the rate count is not set and thus the rate is considered not valid. Fix it by setting the count to 1. Fixes: 3e99b4d28219 ("wifi: mac80211: Sanity check tx bitrate if not provided by driver") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250503224232.0d1d1e022d63.I76833c14ba1d66f9bea5c32b25a54d8b36f229ba@changeid
2025-05-07wifi: iwlwifi: remove bc_table_dword transport configJohannes Berg
There's really no point in configuring this, it's just a question of hardware capability. Remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250503224232.6af4ea001226.I693f72a7c3a76e44f9ef2cefd62d606ad100a734@changeid
2025-05-07wifi: iwlwifi: pcie: remove constant wdg_timeoutJohannes Berg
This value is only ever initialized and read, so just replace the usage with the constant and remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250503224232.48333e80a74d.I6c1aaa23fac5ff7400aa59a3093b53774261cb0e@changeid
2025-05-07wifi: iwlwifi: trans: remove hw_wfpm_idJohannes Berg
We only need to have this during init in PCIe, so can just re-read the value. Do that and don't store it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250503224232.4dfa2ae2a844.I46466f2523d8760e93228cd9a93c112d371e002d@changeid
2025-05-07wifi: iwlwifi: trans: remove hw_id_strJohannes Berg
This has never been used, so remove it now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250503224231.4623574bdbe1.I8b09dd25702e7d7e2f0b4c61390baf73878f681d@changeid
2025-05-07wifi: iwlwifi: pass full FW info to transportJohannes Berg
The code currently passes only the specific image that should be loaded, but then has to pass the IML (image loader) out of band, which is confusing. Pass the full FW data together with desired image type, and use the IML from that. This also cleans up the code in the various sub-drivers a bit as they no longer have to look up and check for the image. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250503224231.eac4006e81c5.Iebadc56bb2762e5f4d71f66bb2609d74b33daf11@changeid
2025-05-07wifi: iwlwifi: handle reasons recommended by FW for leaving EMLSRSomashekhar Puttagangaiah
FW sends new notification version 2 indicating whether activating EMLSR mode is recommended or not. If recommendation is to leave EMLSR or force leave then FW sends the reason. Add debug log for the reason sent by FW. Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250503224231.0582726248a4.I9d1d00eb98d10a3a742cb3e06665ce10e5ec93f0@changeid
2025-05-07wifi: iwlwifi: remove PM mode and send-in-D3Johannes Berg
Simplify the logic here by tracking only suspended as a status bit, and remove CMD_SEND_IN_D3 completely. There is no value, since the op-mode sets the state and also sends the commands. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250503224231.cc3360761f1e.I72261afc42cee8983198b4660b7d38b7df7963da@changeid
2025-05-07wifi: iwlwifi: unexport iwl_trans_pcie_send_hcmd()Johannes Berg
It doesn't need to be exported since the code calling it is in the same module. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250503224231.f457a737c663.I8d49b2955a4f2ca47deb664e5fd58e39d612bb63@changeid
generated by cgit (git 2.34.1) at 2025-07-16 08:38:23 +0000