summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-05-12wifi: iwlwifi: cfg: mark Ty devices as discreteJohannes Berg
Looks like these were never marked discrete, since they always used the iwl_so_mac_cfg (earlier iwl_so_trans_cfg). Mark them as discrete since they are. Signed-off-by: Johannes Berg <johannes.berg@intel.com> PerCI-Ready: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Tested-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250511195137.f3a75ae80f28.I79964f4426389f04798b70841a9e847be48bf9c3@changeid
2025-05-12wifi: iwlwifi: cfg: remove MAC type/step matchingJohannes Berg
Now that it's all split into MAC and RF configs, remove the matching on MAC type and step. If we ever need to do something based on the MAC step, we'll have to find some new mechanism (since the MAC type is known already from the PCI IDs table, but not the step), or just handle the (likely small) differences in code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.fca99a5ab315.Iae27b781221fd29845493adf2c29d9e4f7a9c33b@changeid
2025-05-12wifi: iwlwifi: cfg: add a couple of older devicesJohannes Berg
There are some devices that are misidentified, such as 7265-N and Killer 1435 variants. Add their names, and for some of them also add the PCI IDs to match at all. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.ca03a90c294e.I04d64964c664d49ab16760d754968f09c607f36a@changeid
2025-05-12wifi: iwlwifi: cfg: fix PE RF namesJohannes Berg
There are a couple of variants of this, match them correctly to their names and clean up a bit. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.d03eaad5be56.I276a09f0cad364e51ed4730ca81fbe504e61f2c7@changeid
2025-05-12wifi: iwlwifi: cfg: fix and clean up FM/WH device matchingJohannes Berg
We only need a few entries, and there don't seem to be any such devices actually limited to 160 MHz. Also add PCI IDs for the new Killer device on LNL platforms. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.ba2964bee671.If7aaaf10b236115e39b17d37296341de6c821069@changeid
2025-05-12wifi: iwlwifi: cfg: clean up GF device matchingJohannes Berg
Again some names don't actually exist, and we only need a few entries to cover Ty (discrete) and AX211/AX411. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.8888f6798581.If332ebfc3b3f4a335a79ccee13e90f93b1ee4df7@changeid
2025-05-12wifi: iwlwifi: cfg: clean up JF device matchingJohannes Berg
This really only needs to be distinguished based on the RF type, bandwidth limit and possibly diversity (JF1). Some of the names that are defined don't even exist. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.bca83604aa92.I35301d2d8b57c072284fff7bf6682b4a9424e56c@changeid
2025-05-12wifi: iwlwifi: tests: make subdev match test more preciseJohannes Berg
It's OK to match with subdevice_mask as long as that doesn't overlap the RF ID/BW limit/cores fields in that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.87cc0ad360a8.I9be361caedd7258e8e817d4100c549681396f307@changeid
2025-05-12wifi: iwlwifi: cfg: clean up HR device matchingJohannes Berg
We only need a few entries on top of the Killer ones. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.fa0cde465de0.I6a3f9ed9a7341e2c58c69af50a9f126992a745f2@changeid
2025-05-12wifi: iwlwifi: cfg: unify and add some Killer devicesJohannes Berg
Unify a number of Killer devices now that we no longer need to distinguish the MAC type, and add a few more that wouldn't have gotten the right name before. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.a16b1c2740f8.I147b97ef2c8e99451806ea0e34a9eb5bff37c326@changeid
2025-05-12wifi: iwlwifi: cfg: fix and unify Killer/JF configsJohannes Berg
All of these should be 160 MHz, and they can be recognised by just the subdevice ID. Unify all the Killer/JF entries. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.a93788f159ec.I114f09a0f61849ac3b75d12d7def35be842e5b7c@changeid
2025-05-12wifi: iwlwifi: cfg: fix Ma device configsJohannes Berg
These should be according to their RF type, not just use GF unconditionally. Fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.4dd365eb76cd.I91f368df691a3ce6c545d9cdc44676e7883efa16@changeid
2025-05-12wifi: iwlwifi: cfg: fix some device namesJohannes Berg
Officially, the device names have dashes ("Wireless-N"), so add them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.4f7bbd57680f.Ida19b5e696723db5839c13341d6ca7085e8c2568@changeid
2025-05-12wifi: iwlwifi: cfg: remove some unused namesJohannes Berg
There are a couple of old names that don't actually get used. Remove them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.1ed5fc197ba0.I52d7bb49db24523ad93ad83a89c8e846d9a43241@changeid
2025-05-12wifi: iwlwifi: mld: add debug log instead of warningSomashekhar Puttagangaiah
During link selection if the links does not meet the valid grade criteria then add debug log instead of warning. Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.2593268ca988.I9786126cd1078caec8587b166a7f8735300c951d@changeid
2025-05-12wifi: iwlwifi: dbg: fix dump trigger split checkJohannes Berg
Evidently, I confused the fields here, apply_policy should be checked for IWL_FW_INI_APPLY_POLICY_SPLIT_DUMP_RESET. Fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Eilon Rinat <eilon.rinat@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.c802d5cc1312.I0cf5d74f91349499ab35eef0ebdc604961e492ef@changeid
2025-05-10wifi: iwlwifi: mvm/mld: allow puncturing use in 5 GHzJohannes Berg
It was decided this was supported after all, so remove the restriction. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250509104454.2582160-15-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-10wifi: iwlwifi: mld: add support for ROC on BSSPagadala Yesu Anjaneyulu
add support for remain on channel on BSS vif for iwlmld. Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Link: https://patch.msgid.link/20250509104454.2582160-14-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-10wifi: iwlwifi: mld: Block EMLSR only when ready to enter ROCPagadala Yesu Anjaneyulu
If one of the stages in starting a ROC failed, the ROC will not start nor end so EMLSR will stay blocked forever. Block EMLSR once all ROC conditions are validated and clear EMLSR blocked reasons in mld_vif cleanup. Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Link: https://patch.msgid.link/20250509104454.2582160-13-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-10wifi: iwlwifi: mld: move aux_sta member from iwl_mld_link to iwl_mld_vifPagadala Yesu Anjaneyulu
This change reflects the correct ownership of aux_sta, as it is not a property of the link but rather of the virtual interface. Updated the initialization, cleanup and access logic for the aux_sta member to align with its new location within iwl_mld_vif. Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Reviewed-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com> Link: https://patch.msgid.link/20250509104454.2582160-12-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-10wifi: iwlwifi: mld: Fix ROC activity cleanup in iwl_mld_vifPagadala Yesu Anjaneyulu
The roc_activity member in the iwl_mld_vif structure was previously set to zero during cleanup as was present in struct_group, which incorrectly indicated ROC_ACTIVITY_HOTSPOT. To fix this issue, remove roc_activity member from struct_group. Notify mac80211 of ROC expiration during vif cleanup to maintain synchronization between the driver and mac80211. While on it, update it's type to enum iwl_roc_activity. Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Link: https://patch.msgid.link/20250509104454.2582160-11-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-10wifi: iwlwifi: mld: Correct comments for cleanup functionsPagadala Yesu Anjaneyulu
Update comments to accurately reflect the purpose of the iwl_mld_cleanup_link and iwl_cleanup_mld functions. Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Reviewed-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com> Link: https://patch.msgid.link/20250509104454.2582160-10-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-10wifi: iwlwifi: rename iwl_cfg to iwl_rf_cfgJohannes Berg
With all the cleanups now, we can rename the structure to better indicate the functionality. For older devices this isn't quite accurate, of course, but it's better to have a name that reflects future use for maintenance. Add some kernel-doc while at it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250509104454.2582160-9-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-10wifi: iwlwifi: cfg: clean up Sc/Dr/Br configsJohannes Berg
For now, the WH and PE radios require the same config as FM, so just add a #define for those instead of copying the data. Since this is true, Sc/Dr/Br all used the same configs for all RF types, but that's confusing, so now use the defined WH/PE names for the correct combinations. We can also now enable the unit test that ensures we have no duplicate RF configs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250509104454.2582160-8-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-10wifi: iwlwifi: cfg: add FM RF configJohannes Berg
The Bz configs really should be FM for the RF, so move that around. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250509104454.2582160-7-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-10wifi: iwlwifi: cfg: add GF RF configJohannes Berg
This is equivalent to just the previous iwl_cfg_ma, but really should also be used for Bz/Gf and Sc/Gf, instead of those using EHT sizes. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250509104454.2582160-6-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-10wifi: iwlwifi: cfg: unify HR configsJohannes Berg
Unify the HR configs to just one HR RF config. All the fields were the same already, so this doesn't do anything. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250509104454.2582160-5-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-10wifi: iwlwifi: cfg: unify JF configsJohannes Berg
Unify the JF configs to just one JF RF config. This can be done because the differing fields (thermal and DCCM offsets) won't be used for Qu MACs (and up) due to firmware support. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250509104454.2582160-4-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-10wifi: iwlwifi: cfg: unify num_rbds configJohannes Berg
This should depend on both the RF (VHT/HE/EHT support) and the MAC (<=22000 can put multiple frames into one buffer), so unify the config in the struct iwl_cfg to just have it sized according to the RF, and then double it for all the MACs starting from AX210 (So/Ty). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250509104454.2582160-3-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-10wifi: iwlwifi: cfg: add ucode API min/max to MAC configJohannes Berg
In some older devices, the min/max firmware API supported by the driver depends on the specific device, when sharing the the same MAC (config). For most newer devices, it really is dependent on the MAC instead, since the firmware was frozen for certain MAC types. However, in the future we expect also freezes for RF types there. To handle this most generally, add an API min/max to the MAC config and then use the narrowest range prescribed by both, if set. For the newer MACs since 9000, move the configuration, there was only a freeze on MAC+RF lines so far. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250509104454.2582160-2-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: remove unused high_temp from iwl_cfgJohannes Berg
This value is never read, so it's not needed. Remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-16-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: move MAC parameters to MAC dataJohannes Berg
There are a number of MAC parameters that are in the iwl_cfg (which is the last config matched to the MAC/RF combination). This isn't necessary, there are many more of those than MACs, so move (most of) the data into the MAC family config struct. Note that DCCM information remains for use by older devices, and on 9000 series it'll be in struct iwl_cfg but be ignored when the CRF is in a Qu/So platform. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-15-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: remove DCCM offsets from new devicesJohannes Berg
This is only used with old-style debug dump, which isn't supported on newer devices, so remove the data. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-14-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: remove eeprom_size from new devicesJohannes Berg
Since 22000 series, the data is read by the firmware and the driver doesn't need to know, remove the useless setting. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-13-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: rename struct iwl_base_paramsJohannes Berg
These are (going to be) base MAC parameters that are identical even for different platforms with the same MAC, so rename the structure accordingly, calling it iwl_family_base_params. Also rename the pointer to it so the dereferencing is a bit shorter. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-12-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: remove rf_id fieldJohannes Berg
This field is always set for >= 9000 series, but then we already check that, so it's not needed. Remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-11-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: remove dbgc_supported fieldJohannes Berg
This field is unused, remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-10-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: rename cfg_trans_params to mac_cfgJohannes Berg
Since 9000 series devices, the devices are split into MAC and CRF parts. Currently, "struct iwl_cfg" reflects some MAC and some RF parameters, but we want to clean this up and move the MAC data to what's now "struct iwl_cfg_trans_params". As the first step, to reflect the intent, rename this structure. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-9-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: pass trans to iwl_parse_nvm_mcc_info()Johannes Berg
There's no need to pass various different pointers when the transport is already established, so just pass that instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-8-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: remove nvm_hw_section_num from new devicesJohannes Berg
This value hasn't been used since unified firmware in 22000 series, so there's no need to set the value for that or newer devices. Remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-7-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: handle cc firmware dynamicallyJohannes Berg
Instead of using fw_name_pre, handle the cc firmware file name specially in iwl_drv_get_fwname_pre() for the cc MAC type. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-6-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: build ax210 family FW names dynamicallyJohannes Berg
Add support for the TY MAC (discrete device) and GF4 RF to the list of MAC/RF types, and use that to remove fw_name_pre for the ax210 family devices. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-5-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: remove 'cdb' valueJohannes Berg
This is never used, so remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-4-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: remove QuZ/JF special casesJohannes Berg
Since JF RF always uses b0 step and QuZ MAC always uses a0 step for firmware, there's no need for these configs that just force the steps to those values. Remove them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-3-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: build 9000 series FW filenames dynamicallyJohannes Berg
This is more maintainable than the fw_name_pre prefix, and requires fewer duplicate structs as well. Since only b0 FW exists, override the MAC/RF steps for these devices. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-2-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: add JF1/JF2 RF for dynamic FW buildingJohannes Berg
This is needed, otherwise we don't know what to do and will not find the correct firmware. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-16-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: pcie: remove 0x2726 devicesJohannes Berg
These are test chips, not available to users, and not even listed in the PCI IDs table (so the driver won't bind them). There's no reason to list specific devices with them in the driver. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-15-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: inline HT paramsJohannes Berg
With just a handful of values in two bytes, the params are smaller than the pointer to them. Inline them and save some space. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-14-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: remove 6 GHz from ht40_bandsJohannes Berg
Since there's no HT on 6 GHz, only HE, the HT capabilities are never initialized, and so the ht40_bands value is never checked for the 6 GHz band. Remove the misleading value. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-13-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: mld: call thermal exit without wiphy lock heldBenjamin Berg
The driver must not hold the wiphy mutex when unregistering the thermal devices. Do not hold the lock for the call to iwl_mld_thermal_exit and only do a lock/unlock to cancel the ct_kill_exit_wk work. The problem is that iwl_mld_tzone_get_temp needs to take the wiphy lock while the thermal code is holding its own locks already. When unregistering the device, the reverse would happen as the driver was calling thermal_cooling_device_unregister with the wiphy mutex already held. It is not likely to trigger this deadlock as it can only happen if the thermal code is polling the temperature while the driver is being unloaded. However, lockdep reported it so fix it. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-12-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
generated by cgit (git 2.34.1) at 2025-07-15 22:00:01 +0000