summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-10-10iio: Switch back to struct platform_driver::remove()Uwe Kleine-König
After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/iio/ to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. While touching these files, make indention of the struct initializer consistent in several files. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://patch.msgid.link/20241009060056.502059-2-u.kleine-koenig@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-10iio: imu: bmi323: remove redundant register definitionTarang Raval
BMI323_STEP_SC1_REG was defined twice. Redundant definition has been removed Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io> Link: https://patch.msgid.link/20241009111828.43371-1-tarang.raval@siliconsignals.io Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-10iio: frequency: adf4371: make use of dev_err_probe()Nuno Sa
Use dev_err_probe() to simplify probe() error handling. While at it, add some error log in case we fail to get clkin. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://patch.msgid.link/20241009-dev-adf4371-minor-improv-v1-4-97f4f22ed941@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-10iio: frequency: adf4371: drop clkin from struct adf4371_stateNuno Sa
We already cache clkin rate during probe and then never use the clk object again. Hence, no point in saving in our global state struct. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://patch.msgid.link/20241009-dev-adf4371-minor-improv-v1-3-97f4f22ed941@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-10iio: frequency: adf4371: drop spi_set_drvdata()Nuno Sa
spi_set_drvdata() is not needed as there's no spi_get_drvdata() call in the code. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://patch.msgid.link/20241009-dev-adf4371-minor-improv-v1-2-97f4f22ed941@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-10iio: frequency: adf4371: make use of spi_get_device_match_data()Nuno Sa
To use spi_get_device_match_data(), add the chip_info structure to the of_device_id table which is always a good thing to do. While at it, added dedicated variables for each chip (instead of the harder to maintain array) and added a new string variable for the part name. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://patch.msgid.link/20241009-dev-adf4371-minor-improv-v1-1-97f4f22ed941@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-10iio: adc: ad7944: add namespace to T_QUIET_NSDavid Lechner
Add AD7944_ namespace to T_QUIET_NS. This is the preferred style. This way the bad style won't be copied when we add more T_ macros. Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://patch.msgid.link/20241009-iio-adc-ad7944-add-namespace-to-t_quiet_ns-v1-1-a216357a065c@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-10iio: pressure: rohm-bm1390: Remove redundant if statementColin Ian King
There is a check on non-zero ret that is redundant because the same check is being performed in a previous if statement and also before that. The check is not required, remove it. Signed-off-by: Colin Ian King <colin.i.king@intel.com> Link: https://patch.msgid.link/20241010170835.772764-1-colin.i.king@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-10iio: imu: bmi270: Add spi driver for bmi270 imuAlex Lanzano
Implement SPI driver for the Bosch BMI270 6-axis IMU. Provide raw read write access to acceleration and angle velocity measurements via the SPI interface on the device. Signed-off-by: Alex Lanzano <lanzano.alex@gmail.com> Link: https://patch.msgid.link/20241002033628.681812-1-lanzano.alex@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-06iio: light: veml6030: add support for veml6035Javier Carrasco
The veml6035 is an ALS that shares most of its functionality with the veml6030, which allows for some code recycling. Some chip-specific properties differ and dedicated functions to get and set the sensor gain as well as its initialization are required. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241001-veml6035-v3-9-d789f6ff147c@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-06dt-bindings: iio: light: veml6030: add veml6035Javier Carrasco
The veml6035 is a similar ambient light sensor to the veml6030, and from the bindings point of view, it shares the same properties. Its only difference in that respect is a different I2C address. Estend the existing bindings to support the veml6035 ALS. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241001-veml6035-v3-8-d789f6ff147c@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-06iio: light: veml6030: power off device in probe error pathsJavier Carrasco
Move devm_add_action_or_reset() with a device shut down action to the hardware initialization function to ensure that any error path after powering on the device leads to a power off. Add struct device *dev to the argument list to clarify the device the action is registered against, and use it wherever &client->dev was used. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241001-veml6035-v3-7-d789f6ff147c@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-06iio: light: veml6030: drop processed info for white channelJavier Carrasco
The resolution of the WHITE channel is not provided by the manufacturer, neither in the datasheet nor in the application note (even their proprietary application only processes the ALS channel, giving raw values for WHITE). The current implementation assumes that both resolutions are identical, which is extremely unlikely, especially for photodiodes with different spectral responses. Drop the processed information as it is meaningless. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241001-veml6035-v3-6-d789f6ff147c@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-06iio: light: veml6030: use read_avail() for available attributesJavier Carrasco
Drop custom attributes by using the standard read_avail() callback to read scale and integration time. When at it, add the integration time and scale attributes fro the WHITE channel, as they modify its value as well. To avoid breaking the current ABI, these attributes must be kept as separate for both channels even though they are shared under the hood. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241001-veml6035-v3-5-d789f6ff147c@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-06iio: light: veml6030: add support for a regulatorJavier Carrasco
Use the device managed function from the regulator API to get and enable a regulator powering the device. Use "vdd" as the ID to account for the provided name in the datasheet. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241001-veml6035-v3-4-d789f6ff147c@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-06dt-bindings: iio: light: veml6030: add vdd-supply propertyJavier Carrasco
Add vdd-supply to account for the sensor's power source. Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241001-veml6035-v3-3-d789f6ff147c@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-06iio: light: veml6030: use dev_err_probe()Javier Carrasco
Use the more convenient dev_err_probe() to get rid of the dev_err() + return sequence in the probe error paths. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241001-veml6035-v3-2-d789f6ff147c@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-06iio: light: veml6030: add set up delay after any power on sequenceJavier Carrasco
The veml6030 requires a delay of 4 ms after activating the sensor. That is done correctly during the hw initialization, but it's missing after resuming. Move the delay to the power on function to make sure that it is always observerd. When at it, use fsleep() instead of usleep_range() as such a narrow range is not required. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241001-veml6035-v3-1-d789f6ff147c@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-06iio: pressure: bmp280: Use char instead of s32 for data bufferVasileios Amoiridis
As it was reported and discussed here [1], storing the sensor data in an endian aware s32 buffer is not optimal. Advertising the timestamp as an addition of 2 s32 variables which is also implied is again not the best practice. For that reason, change the s32 sensor_data buffer to a u8 buffer and align it properly. [1]: https://lore.kernel.org/linux-iio/73d13cc0-afb9-4306-b498-5d821728c3ba@stanley.mountain/ Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com> Link: https://patch.msgid.link/20240930202353.38203-3-vassilisamir@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-06iio: pressure: bmp280: Use unsigned type for raw valuesVasileios Amoiridis
The adc values coming directly from the sensor in the BM{E,P}{2,3}xx sensors are unsigned values so treat them as such. Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com> Link: https://patch.msgid.link/20240930202353.38203-2-vassilisamir@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-06dt-bindings: iio: dac: ad3552r: fix maximum spi speedAngelo Dureghello
Fix maximum SPI clock speed, as per datasheet (Rev. B, page 6). Fixes: b0a96c5f599e ("dt-bindings: iio: dac: Add adi,ad3552r.yaml") Cc: stable@vger.kernel.org Signed-off-by: Angelo Dureghello <adureghello@baylibre.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20241003-wip-bl-ad3552r-axi-v0-iio-testing-v4-4-ceb157487329@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-06MAINTAINERS: iio: imu: add entry for InvenSense MPU-6050 driverJean-Baptiste Maneyrol
Add entry for inv_mpu6050 iio driver supporting InvenSense MPU-6xxx and ICM-206xxx devices. Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://patch.msgid.link/20241003-invn-maintainers-email-update-v2-3-ca5a4928eb22@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-06dt-bindings: iio: imu: migrate InvenSense email to TDK group domainJean-Baptiste Maneyrol
Migrate maintainer email to TDK domain. Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20241003-invn-maintainers-email-update-v2-2-ca5a4928eb22@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-06MAINTAINERS: iio: migrate invensense email address to tdk domainJean-Baptiste Maneyrol
InvenSense is part of TDK group. Update email address to use the TDK domain. Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://patch.msgid.link/20241003-invn-maintainers-email-update-v2-1-ca5a4928eb22@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-06MAINTAINERS: add the GE HealthCare PMC ADC driver entryHerve Codina
After contributing the driver, add myself as the maintainer for the GE HealthCare PCM ADC IIO driver. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Tested-by: Ian Ray <ian.ray@gehealthcare.com> Link: https://patch.msgid.link/20241003114641.672086-5-herve.codina@bootlin.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-06iio: adc: Add support for the GE HealthCare PMC ADCHerve Codina
The GE HealthCare PMC Analog to Digital Converter (ADC) is a 16-Channel (voltage and current), 16-Bit ADC with an I2C Interface. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Tested-by: Ian Ray <ian.ray@gehealthcare.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20241003114641.672086-4-herve.codina@bootlin.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-06dt-bindings: iio: adc: Add the GE HealthCare PMC ADCHerve Codina
The GE HealthCare PMC Analog to Digital Converter (ADC) is a 16-Channel (voltage and current), 16-Bit ADC with an I2C Interface. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Tested-by: Ian Ray <ian.ray@gehealthcare.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20241003114641.672086-3-herve.codina@bootlin.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-06dt-bindings: vendor-prefixes: Add an entry for GE HealthCareHerve Codina
Add the "gehc" entry for GE HealthCare. https://www.gehealthcare.com Signed-off-by: Herve Codina <herve.codina@bootlin.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Ian Ray <ian.ray@gehealthcare.com> Link: https://patch.msgid.link/20241003114641.672086-2-herve.codina@bootlin.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-06docs: iio: fix grammatical errorIvin Joel Abraham
Clarify the instruction for disabling autocalibration by adding the word "by" Signed-off-by: Ivin Joel Abraham <ivinjabraham@gmail.com> Link: https://patch.msgid.link/20241002100341.110435-1-ivinjabraham@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-05iio: adc: ad7606: Sort includes in alphabetical orderGuillaume Stols
Some of the includes were not in alphabetical order, this commit fixes it. Signed-off-by: Guillaume Stols <gstols@baylibre.com> Link: https://patch.msgid.link/20241004-ad7606_add_iio_backend_support-v3-5-38757012ce82@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-05iio: adc: ad7606: Fix typo in the driver nameGuillaume Stols
The parallel driver's name is ad7606_par and not ad7606_parallel. Fixes: 0046a46a8f93 ("staging/ad7606: Actually build the interface modules") Signed-off-by: Guillaume Stols <gstols@baylibre.com> Link: https://patch.msgid.link/20241004-ad7606_add_iio_backend_support-v3-1-38757012ce82@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-05iio: adc: qcom-spmi-adc5: Tidy up adc5_get_fw_data() error messagesBjorn Andersson
In the event that no channels (child nodes) are defined, the adc5 driver will provide a generic error message indicating that adc5_get_fw_data() returned -EINVAL. In all other error cases we get two error messages, one helpful and the generic one. Add a specific error message for the no channels case, and drop the generic one, in order to improve the generates log prints in both cases. Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com> Link: https://patch.msgid.link/20241004-spmi-adc5-no-channel-error-v1-1-1a43d13ae967@oss.qualcomm.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-05iio: pac1921: remove unnecessary explicit castsMatteo Martelli
Many explicit casts were introduced to address Wconversion and Wsign-compare warnings. Remove them to improve readability. Link: https://lore.kernel.org/linux-iio/1fa4ab12-0939-477d-bc92-306fd32e4fd9@stanley.mountain/ Signed-off-by: Matteo Martelli <matteomartelli3@gmail.com> Link: https://patch.msgid.link/20240930-iio-pac1921-nocast-v2-1-cc349e137f75@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-05iio: light: veml6070: use dev_err_probe in probe functionJavier Carrasco
Drop the common 'dev_err() + return' combination in the probe function and use 'return dev_err_probe()' instead. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20240929-veml6070-cleanup-v1-7-a9350341a646@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-05iio: light: veml6070: add devicetree supportJavier Carrasco
Register the compatible from the dt-bindings. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20240929-veml6070-cleanup-v1-6-a9350341a646@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-05dt-bindings: iio: light: vishay,veml6075: add vishay,veml6070Javier Carrasco
This UVA device with I2C has the same properties as the veml6075, and the same dt-bindings can cover it too. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240929-veml6070-cleanup-v1-5-a9350341a646@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-05iio: light: veml6070: add support for a regulatorJavier Carrasco
Add support for a device-managed regulator with the reference name provided in the datasheet (vdd). Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20240929-veml6070-cleanup-v1-4-a9350341a646@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-05iio: light: veml6070: use device managed iio_device_registerJavier Carrasco
Simplify the code by using devm_iio_device_register(), which removes the need for a 'remove' function, as there are no more actions to take. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20240929-veml6070-cleanup-v1-3-a9350341a646@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-05iio: light: veml6070: use guard to handle mutexJavier Carrasco
Simplify the mutext handling by using a guard to automate the mutex unlocking. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20240929-veml6070-cleanup-v1-2-a9350341a646@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-05iio: light: veml6070: add action for i2c_unregister_deviceJavier Carrasco
Simplify the code by adding an action to call i2c_unregister_device(), which removes the need for a 'fail' label, gotos to it, and an explicit call in veml6070_remove(). Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20240929-veml6070-cleanup-v1-1-a9350341a646@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-05iio: dac: ad5770r: Convert to get_unaligned_le16Abhash Jha
Convert the manual shifting to use `get_unaligned_le16` api. Signed-off-by: Abhash Jha <abhashkumarjha123@gmail.com> Link: https://patch.msgid.link/20240928161805.165543-1-abhashkumarjha123@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-05iio: adc: mt6360-adc: Converted to use get_unaligned_be16()Abhash Jha
Changed the manual shifting and adding of bytes to use get_unaligned_be16() api instead. Signed-off-by: Abhash Jha <abhashkumarjha123@gmail.com> Link: https://patch.msgid.link/20240928161108.163647-1-abhashkumarjha123@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-05iio: adc: Fix typos in comments across various filesYu Jiaoliang
This commit fixes several typographical errors in comments within the drivers/iio/adc directory. No functional changes are made. Detected using codespell. Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com> Link: https://patch.msgid.link/20240926034411.3482986-1-yujiaoliang@vivo.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-05iio: light: ltrf216a: Document device name for compatibleShreeya Patel
Compatible 'ltr,ltrf216a' is used by Valve's Steamdeck device via the ACPI + PRP0001 mechanism. Document this info alongside the compatible. Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com> Link: https://patch.msgid.link/20240923131527.1408691-1-shreeya.patel@collabora.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-05iio: imu: inv_mpu6050: add support for IAM-20680HT/HPJean-Baptiste Maneyrol
IAM-20680HT & HP are 2 variants of IAM-20680 with better specs, wider temperature range, and a bigger FIFO (4k). Fully compatible with IAM-20680, FIFO is 512 bytes by default and with correct register setting we expand it to full 4k. Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://patch.msgid.link/20240923-inv-mpu6050-add-iam20680-ht-hp-v2-2-48290e0b9931@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-05dt-bindings: iio: imu: mpu6050: Add iam20680ht/hp bindings to mpu6050Jean-Baptiste Maneyrol
IAM-20680HT & HP are 2 variants of IAM-20680 that are backwards compatible. They just have better specs, temperature range and a bigger FIFO. Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240923-inv-mpu6050-add-iam20680-ht-hp-v2-1-48290e0b9931@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-05iio: adc: ad5755: use scoped device_for_each_child_node()Javier Carrasco
Switch to device_for_each_child_node_scoped() to simplify the code by removing the need for calls to fwnode_handle_put() in the error path, in this particular case dropping the jump to error_out as well. This prevents possible memory leaks if new error paths are added without the required call to fwnode_handle_put(). Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20240926-iio_device_for_each_child_node_scoped-v1-4-64ca8a424578@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-05iio: adc: sun20i-gpadc: use scoped device_for_each_child_node()Javier Carrasco
Switch to device_for_each_child_node_scoped() to simplify the code by removing the need for calls to fwnode_handle_put() in the error path. This prevents possible memory leaks if new error paths are added without the required call to fwnode_handle_put(). Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Link: https://patch.msgid.link/20240926-iio_device_for_each_child_node_scoped-v1-3-64ca8a424578@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-05iio: adc: qcom-spmi-vadc: use scoped device_for_each_child_node()Javier Carrasco
Switch to device_for_each_child_node_scoped() to simplify the code by removing the need for calls to fwnode_handle_put() in the error path. This prevents possible memory leaks if new error paths are added without the required call to fwnode_handle_put(). Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20240926-iio_device_for_each_child_node_scoped-v1-2-64ca8a424578@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-05iio: adc: qcom-pm8xxx-xoadc: use scoped device_for_each_child_node()Javier Carrasco
Switch to device_for_each_child_node_scoped() to simplify the code by removing the need for calls to fwnode_handle_put() in the error path. This prevents possible memory leaks if new error paths are added without the required call to fwnode_handle_put(). Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20240926-iio_device_for_each_child_node_scoped-v1-1-64ca8a424578@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit (git 2.34.1) at 2025-07-16 02:51:47 +0000