summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-12-19qlcnic: fix unused variable warningsShahed Shaikh
qlcnic_hw.c:370: warning: variable cmd_desc set but not used qlcnic_hw.c:368: warning: variable consumer set but not used qlcnic_main.c:448: warning: variable ref_count set but not used qlcnic_main.c:534: warning: variable mem_base set but not used qlcnic_ctx.c:137: warning: variable tmp_tmpl set but not used qlcnic_ctx.c:133: warning: variable version set but not used qlcnic_minidump.c:200: warning: variable opcode set but not used Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-19watchdog: Fix disable/enable regressionBjørn Mork
Commit 8d4516904b39 ("watchdog: Fix CPU hotplug regression") causes an oops or hard lockup when doing echo 0 > /proc/sys/kernel/nmi_watchdog echo 1 > /proc/sys/kernel/nmi_watchdog and the kernel is booted with nmi_watchdog=1 (default) Running laptop-mode-tools and disconnecting/connecting AC power will cause this to trigger, making it a common failure scenario on laptops. Instead of bailing out of watchdog_disable() when !watchdog_enabled we can initialize the hrtimer regardless of watchdog_enabled status. This makes it safe to call watchdog_disable() in the nmi_watchdog=0 case, without the negative effect on the enabled => disabled => enabled case. All these tests pass with this patch: - nmi_watchdog=1 echo 0 > /proc/sys/kernel/nmi_watchdog echo 1 > /proc/sys/kernel/nmi_watchdog - nmi_watchdog=0 echo 0 > /sys/devices/system/cpu/cpu1/online - nmi_watchdog=0 echo mem > /sys/power/state Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=51661 Cc: <stable@vger.kernel.org> # v3.7 Cc: Norbert Warmuth <nwarmuth@t-online.de> Cc: Joseph Salisbury <joseph.salisbury@canonical.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-19Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-12-19Merge tag 'for-3.8-rc1' of git://gitorious.org/linux-pwm/linux-pwmLinus Torvalds
Pull pwm changes from Thierry Reding: "A new driver has been added for the SPEAr platform and the TWL4030/6030 driver has been replaced by two drivers that control the regular PWMs and the PWM driven LEDs provided by the chips. The vt8500, tiecap, tiehrpwm, i.MX, LPC32xx and Samsung drivers have all been improved and the device tree bindings now support the PWM signal polarity." Fix up trivial conflicts due to __devinit/exit removal. * tag 'for-3.8-rc1' of git://gitorious.org/linux-pwm/linux-pwm: (21 commits) pwm: samsung: add missing s3c->pwm_id assignment pwm: lpc32xx: Set the chip base for dynamic allocation pwm: lpc32xx: Properly disable the clock on device removal pwm: lpc32xx: Fix the PWM polarity pwm: i.MX: eliminate build warning pwm: Export of_pwm_xlate_with_flags() pwm: Remove pwm-twl6030 driver pwm: New driver to support PWM driven LEDs on TWL4030/6030 series of PMICs pwm: New driver to support PWMs on TWL4030/6030 series of PMICs pwm: pwm-tiehrpwm: pinctrl support pwm: tiehrpwm: Add device-tree binding pwm: pwm-tiehrpwm: Adding TBCLK gating support. pwm: pwm-tiecap: pinctrl support pwm: tiecap: Add device-tree binding pwm: Add TI PWM subsystem driver pwm: Device tree support for PWM polarity pwm: vt8500: Ensure PWM clock is enabled during pwm_config pwm: vt8500: Fix build error pwm: spear: Staticize spear_pwm_config() pwm: Add SPEAr PWM chip driver support ...
2012-12-19of: define struct device in of_platform.h if !OF_DEVICE and !OF_ADDRESSJonas Gorski
Fixes the following warning: include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default] include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Rob Herring <robherring2@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-19Merge tag 'for-v3.8-part2' of git://git.infradead.org/battery-2.6Linus Torvalds
Pull battery update, part 2, from Anton Vorontsov: "These are left overs that I didn't have time to review/apply before the merge window opened. I didn't want to "spoil" the first pull request with these late patches, so they were not included: - A small patch for the RX51 OMAP board (Nokia N900 phone), the patch creates a battery monitor device instance, so that it can be probed. It was acked by the OMAP maintainer; - A couple of late bug fixes for the charger-manager: corrects corner cases for the battery full handling." * tag 'for-v3.8-part2' of git://git.infradead.org/battery-2.6: charger-manager: Fix bug when check dropped voltage after fullbatt event charger-manager: Fix bug related to checking fully charged state of battery ARM: OMAP: rx51: Register platform device for rx51_battery
2012-12-19Merge tag 'modules-next-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module update from Rusty Russell: "Nothing all that exciting; a new module-from-fd syscall for those who want to verify the source of the module (ChromeOS) and/or use standard IMA on it or other security hooks." * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: MODSIGN: Fix kbuild output when using default extra_certificates MODSIGN: Avoid using .incbin in C source modules: don't hand 0 to vmalloc. module: Remove a extra null character at the top of module->strtab. ASN.1: Use the ASN1_LONG_TAG and ASN1_INDEFINITE_LENGTH constants ASN.1: Define indefinite length marker constant moduleparam: use __UNIQUE_ID() __UNIQUE_ID() MODSIGN: Add modules_sign make target powerpc: add finit_module syscall. ima: support new kernel module syscall add finit_module syscall to asm-generic ARM: add finit_module syscall to ARM security: introduce kernel_module_from_file hook module: add flags arg to sys_finit_module() module: add syscall to load module from fd
2012-12-19Merge tag 'byteswap-for-linus-20121219' of ↵Linus Torvalds
git://git.infradead.org/users/dwmw2/byteswap Pull preparatory gcc intrisics bswap patch from David Woodhouse: "This single patch is effectively a no-op for now. It enables architectures to opt in to using GCC's __builtin_bswapXX() intrinsics for byteswapping, and if we merge this now then the architecture maintainers can enable it for their arch during the next cycle without dependency issues. It's worth making it a par-arch opt-in, because although in *theory* the compiler should never do worse than hand-coded assembler (and of course it also ought to do a lot better on platforms like Atom and PowerPC which have load-and-swap or store-and-swap instructions), that isn't always the case. See http://gcc.gnu.org/bugzilla/show_bug.cgi?id=46453 for example." * tag 'byteswap-for-linus-20121219' of git://git.infradead.org/users/dwmw2/byteswap: byteorder: allow arch to opt to use GCC intrinsics for byteswapping
2012-12-19blk: avoid divide-by-zero with zero discard granularityLinus Torvalds
Commit 8dd2cb7e880d ("block: discard granularity might not be power of 2") changed a couple of 'binary and' operations into modulus operations. Which turned the harmless case of a zero discard_granularity into a possible divide-by-zero. The code also had a much more subtle bug: it was doing the modulus of a value in bytes using 'sector_t'. That was always conceptually wrong, but didn't actually matter back when the code assumed a power-of-two granularity: we only looked at the low bits anyway. But with potentially arbitrary sector numbers, using a 'sector_t' to express bytes is very very wrong: depending on configuration it limits the starting offset of the device to just 32 bits, and any overflow would result in a wrong value if the modulus wasn't a power-of-two. So re-write the code to not only protect against the divide-by-zero, but to do the starting sector arithmetic in sectors, and using the proper types. [ For any mathematicians out there: it also looks monumentally stupid to do the 'modulo granularity' operation *twice*, never mind having a "+ granularity" in the second modulus op. But that's the easiest way to avoid negative values or overflow, and it is how the original code was done. ] Reported-by: Ingo Molnar <mingo@kernel.org> Reported-by: Doug Anderson <dianders@chromium.org> Cc: Neil Brown <neilb@suse.de> Cc: Shaohua Li <shli@fusionio.com> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-19spi/sh-hspi: fix return value check in hspi_probe().Cyril Roelandt
According to its documentation, clk_get() returns a "valid IS_ERR() condition containing errno", so we should call IS_ERR() rather than a NULL check. Signed-off-by: Cyril Roelandt <tipecaml@gmail.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-19spi: fix tegra SPI binding examplesAllen Martin
Fix name of slink binding and address of sflash example to make it self consistent. Signed-off-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-19of: Fix export of of_find_matching_node_and_match()Grant Likely
Commit 50c8af4cf9, "of: introduce for_each_matching_node_and_match()" renamed of_find_matching_node() to of_find_matching_node_and_match() and created a new static inline of_find_matching_node() wrapper around the new name. However, the change neglected to change the EXPORT_SYMBOL() reference causing build errors for modules. This patch fixes the EXPORT_SYMBOL() statement. Discovered on a PowerPC Efika build with the mpc52xx_uart driver being built as a module. Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-18xtensa: don't try to build DTB when OF is disabledMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: set the correct ethernet address for xtfpgaChris Zankel
The last byte of the mac address is determined by a DIP switch, so update the OF property with that address. Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: clean up files to make them code-style compliantChris Zankel
Remove heading and trailing spaces, trim trailing lines, and wrap lines that are longer than 80 characters. Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: provide endianness macro for sparseMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: fix RASID SR initializationMax Filippov
set_rasid_register accepts new RASID SR value, but ASID_USER_FIRST is ASID value for the ring 1; RASID value is made by ASID_INSERT macro. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: initialize CPENABLE SR when core has oneMax Filippov
XCHAL_CP_NUM is defined in variant/tie.h and it is not included by head.S, leaving CPENABLE register uninitialised. XCHAL_HAVE_CP is defined in variant/core.h to 1 when core has CPENABLE SR. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: reset all timers on initializationMax Filippov
There are XCHAL_NUM_TIMERS, reset them all. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18Use for_each_compatible_node() macro.Wei Yongjun
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: add XTFPGA DTSMax Filippov
Add common XTFPGA parts as *.dtsi (base board, flash) and DTS for LX60 and for ML605. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: add support for the XTFPGA boardsMax Filippov
The Avnet LX60/LX110/LX200 board is an FPGA board that can be configured with an Xtensa processor and an OpenCores Ethernet device. Signed-off-by: Chris Zankel <chris@zankel.net> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: add device trees supportMax Filippov
Device trees allow specification of hardware topology and device parameters at runtime instead of hard-coding them in platform setup code. This allows running single binary kernel on a range of compatible boards. New boot parameters tag BP_TAG_FDT is allocated and a pointer to flat device tree is passed in it. Note that current interrupt mapping scheme uses single cell for interrupt identification. That means that IRQ numbers used in DTS must be CPU internal IRQ numbers, not external. It is possible to extend interrupt identification to two cells, and use second cell to tell external IRQ numbers form internal. That would allow to use single DTS on multiple boards with different mapping of external IRQ numbers. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: add IRQ domains supportMax Filippov
IRQ domains provide a mechanism for conversion of linux IRQ numbers to hardware IRQ numbers and vice versus. It is used by OpenFirmware for linking device tree objects to their respective interrupt controllers. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: add U-Boot image support (uImage).Max Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: clean up boot make rulesMax Filippov
- remove duplicate rules for binary and packed image - use predefined macros for ld/objcopy/gzip - remove build-id section from bootable elf image Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: fix mb and wmb definitionsMax Filippov
Define mb and wmb as memw to force memory barrier. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: add s32c1i-based spinlock implementationsMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: add s32c1i-based bitops implementationsMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: add s32c1i-based atomic ops implementationsMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: add s32c1i sanity checkMax Filippov
Add a brief sanity test of S32C1I functionality. This instruction is needed by the kernel and userland as part of the base ABI (including GCC atomic builtins, certain threading packages, future atomic support in the C++ standard, etc). However, correct operation of this instruction requires some cooperation by hardware external to the processor (such as bus bridge, bus fabric, or memory controller). Minimally exercising this mechanism and reporting explicit status early in the boot process is helpful to chip vendors using the Linux kernel as a benchmark of correctness of hardware. As it turns out, S32C1I is not exercised by the kernel and by uClibc based userland as of early June 2008. This is expected to change soon as both incorporate more recent open source developments. Signed-off-by: Marc Gauthier <marc@tensilica.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: add trap_set_handler functionMax Filippov
trap_set_handler sets new C-handler in the exception table and returns previous handler. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: initialize atomctl SRMax Filippov
In order to use S32C1I instruction on cores with ATOMCTL SR the register must be properly initialized. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: save and restore scompare1 SR on kernel entryMax Filippov
Although scompare1 may be saved/restored by xchal_ncp_{load,store} macros, explicit save/restore of registers manipulated by the kernel itself is considered more correct. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: display s32c1i feature flag in cpuinfoMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: fix CPU cache flags formattingMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: properly fix missing compiler barrier in simcallMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: fix build warning for arch/xtensa/mm/tlb.cMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: provide DMA_ERROR_CODE definitionMax Filippov
This fixes the following allmodconfig build error: drivers/uio/uio_dmem_genirq.c:95:18: error: 'DMA_ERROR_CODE' undeclared (first use in this function) drivers/uio/uio_dmem_genirq.c:238:18: error: 'DMA_ERROR_CODE' undeclared (first use in this function) make[3]: *** [drivers/uio/uio_dmem_genirq.o] Error 1 Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: ISS: add BASE_BAUD definition to serial.hMax Filippov
This fixes the following build error in allyesconfig: drivers/tty/serial/8250/8250_early.c: In function 'parse_options': drivers/tty/serial/8250/8250_early.c:160:18: error: 'BASE_BAUD' undeclared (first use in this function) Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: provide proper assembler function boundaries with ENDPROC()Chris Zankel
Use ENDPROC() to mark the end of assembler functions. Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: make DoubleExceptionVector literals fit the gapMax Filippov
Manually load references to exc_table from the explicit literal in order to fit DoubleExceptionVector.literals into the available 16-byte gap before DoubleExceptionVector.text in the absence of link time relaxation. Without this fix DoubleExceptionVector.literal section overlaps DoubleExceptionVector.text section in the linked vmlinux image. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: add config option to disable linker relaxationChris Zankel
The default linker behavior is to optimize identical literal values and remove unnecessary overhead from assembler-generated "longcall" sequences to reduce code size. Provide an option to disable this behavior to improve compile time. Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: unbalanced parenthesesNicolas Kaiser
Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa:fix the incompatible pointer type warning in time.cWanlong Gao
Fix the definition of the function ccount_read to be compatible to the member read of the structure clocksource. Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linuxLinus Torvalds
Pull i2c-embedded changes from Wolfram Sang: - CBUS driver (an I2C variant) - continued rework of the omap driver - s3c2410 gets lots of fixes and gains pinctrl support - at91 gains DMA support - the GPIO muxer gains devicetree probing - typical fixes and additions all over * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (45 commits) i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag i2c: at91: add dma support i2c: at91: change struct members indentation i2c: at91: fix compilation warning i2c: mxs: Do not disable the I2C SMBus quick mode i2c: mxs: Handle i2c DMA failure properly i2c: s3c2410: Remove recently introduced performance overheads i2c: ocores: Move grlib set/get functions into #ifdef CONFIG_OF block i2c: s3c2410: Add fix for i2c suspend/resume i2c: s3c2410: Fix code to free gpios i2c: i2c-cbus-gpio: introduce driver i2c: ocores: Add support for the GRLIB port of the controller and use function pointers for getreg and setreg functions i2c: ocores: Add irq support for sparc i2c: omap: Move the remove constraint ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049 i2c: s3c2410: do not special case HDMIPHY stuck bus detection i2c: s3c2410: use exponential back off while polling for bus idle i2c: s3c2410: do not generate STOP for QUIRK_HDMIPHY i2c: s3c2410: grab adapter lock while changing i2c clock i2c: s3c2410: Add support for pinctrl ...
2012-12-18net: fec: forbid FEC_PTP on SoCs that do not supportShawn Guo
Beside imx6q, the kernel built from imx_v6_v7_defconfig is also supposed to be running on other IMX SoCs that do not have the PTP block. Before fec driver gets fixed to run-time detect target hardware rather than conditional compiling with #ifdef CONFIG_FEC_PTP, let's give it a quick fix in Kconfig to forbid FEC_PTP on those IMX SoCs that do not support PTP. Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-18be2net: fix wrong frag_idx reported by RX CQSathya Perla
The RX CQ can report completions with invalid frag_idx when the RXQ that was *previously* using it, was not cleaned up properly. This hits a BUG_ON() in be2net. When completion coalescing is enabled on a CQ, an explicit CQ-notify (with rearm) is needed for each compl, to flush partially coalesced CQ entries that are pending DMA. In be_close(), this fix now notifies CQ for each compl, waits explicitly for the flush compl to arrive and complains if it doesn't arrive. Also renaming be_crit_error() to be_hw_error() as it's the more appropriate name and to convey that we don't wait for the flush compl only when a HW error has occurred. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-18be2net: fix be_close() to ensure all events are ack'edSathya Perla
In be_close(), be_eq_clean() must be called after all RX/TX/MCC queues have been cleaned to ensure that any events caused while cleaning up completions are notified/acked. Not clearing all events can cause upredictable behaviour when RX rings are re-created in the subsequent be_open(). Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-18sparc64: Define pte_accessible()David S. Miller
We can elide flush_tlb_*() calls when _PAGE_VALID is clear as that is the test used to determine whether or not to queue up a TLB flush in set_pte_at(). Signed-off-by: David S. Miller <davem@davemloft.net>