summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-09-29net: tcp: more detailed ACK events and events for CE marked packetsFlorian Westphal
DataCenter TCP (DCTCP) determines cwnd growth based on ECN information and ACK properties, e.g. ACK that updates window is treated differently than DUPACK. Also DCTCP needs information whether ACK was delayed ACK. Furthermore, DCTCP also implements a CE state machine that keeps track of CE markings of incoming packets. Therefore, extend the congestion control framework to provide these event types, so that DCTCP can be properly implemented as a normal congestion algorithm module outside of the core stack. Joint work with Daniel Borkmann and Glenn Judd. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Glenn Judd <glenn.judd@morganstanley.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-29net: tcp: split ack slow/fast events from cwnd_eventFlorian Westphal
The congestion control ops "cwnd_event" currently supports CA_EVENT_FAST_ACK and CA_EVENT_SLOW_ACK events (among others). Both FAST and SLOW_ACK are only used by Westwood congestion control algorithm. This removes both flags from cwnd_event and adds a new in_ack_event callback for this. The goal is to be able to provide more detailed information about ACKs, such as whether ECE flag was set, or whether the ACK resulted in a window update. It is required for DataCenter TCP (DCTCP) congestion control algorithm as it makes a different choice depending on ECE being set or not. Joint work with Daniel Borkmann and Glenn Judd. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Glenn Judd <glenn.judd@morganstanley.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-29net: tcp: add flag for ca to indicate that ECN is requiredDaniel Borkmann
This patch adds a flag to TCP congestion algorithms that allows for requesting to mark IPv4/IPv6 sockets with transport as ECN capable, that is, ECT(0), when required by a congestion algorithm. It is currently used and needed in DataCenter TCP (DCTCP), as it requires both peers to assert ECT on all IP packets sent - it uses ECN feedback (i.e. CE, Congestion Encountered information) from switches inside the data center to derive feedback to the end hosts. Therefore, simply add a new flag to icsk_ca_ops. Note that DCTCP's algorithm/behaviour slightly diverges from RFC3168, therefore this is only (!) enabled iff the assigned congestion control ops module has requested this. By that, we can tightly couple this logic really only to the provided congestion control ops. Joint work with Florian Westphal and Glenn Judd. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Glenn Judd <glenn.judd@morganstanley.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-29net: tcp: assign tcp cong_ops when tcp sk is createdFlorian Westphal
Split assignment and initialization from one into two functions. This is required by followup patches that add Datacenter TCP (DCTCP) congestion control algorithm - we need to be able to determine if the connection is moderated by DCTCP before the 3WHS has finished. As we walk the available congestion control list during the assignment, we are always guaranteed to have Reno present as it's fixed compiled-in. Therefore, since we're doing the early assignment, we don't have a real use for the Reno alias tcp_init_congestion_ops anymore and can thus remove it. Actual usage of the congestion control operations are being made after the 3WHS has finished, in some cases however we can access get_info() via diag if implemented, therefore we need to zero out the private area for those modules. Joint work with Daniel Borkmann and Glenn Judd. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Glenn Judd <glenn.judd@morganstanley.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-29net: sched: cls_rcvp, complete rcu conversionJohn Fastabend
This completes the cls_rsvp conversion to RCU safe copy, update semantics. As a result all cases of tcf_exts_change occur on empty lists now. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-29dql: dql_queued() should write first to reduce bus transactionsEric Dumazet
While doing high throughput test on a BQL enabled NIC, I found a very high cost in ndo_start_xmit() when accessing BQL data. It turned out the problem was caused by compiler trying to be smart, but involving a bad MESI transaction : 0.05 │ mov 0xc0(%rax),%edi // LOAD dql->num_queued 0.48 │ mov %edx,0xc8(%rax) // STORE dql->last_obj_cnt = count 58.23 │ add %edx,%edi 0.58 │ cmp %edi,0xc4(%rax) 0.76 │ mov %edi,0xc0(%rax) // STORE dql->num_queued += count 0.72 │ js bd8 I got an incredible 10 % gain [1] by making sure cpu do not attempt to get the cache line in Shared mode, but directly requests for ownership. New code : mov %edx,0xc8(%rax) // STORE dql->last_obj_cnt = count add %edx,0xc0(%rax) // RMW dql->num_queued += count mov 0xc4(%rax),%ecx // LOAD dql->adj_limit mov 0xc0(%rax),%edx // LOAD dql->num_queued cmp %edx,%ecx The TX completion was running from another cpu, with high interrupts rate. Note that I am using barrier() as a soft hint, as mb() here could be too heavy cost. [1] This was a netperf TCP_STREAM with TSO disabled, but GSO enabled. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28net_sched: fix another regression in cls_tcindexWANG Cong
Clearly the following change is not expected: - if (!cp.perfect && !cp.h) - cp.alloc_hash = cp.hash; + if (!cp->perfect && cp->h) + cp->alloc_hash = cp->hash; Fixes: commit 331b72922c5f58d48fd ("net: sched: RCU cls_tcindex") Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28net_sched: fix errno in tcindex_set_parms()WANG Cong
When kmemdup() fails, we should return -ENOMEM. Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28Merge branch 'cxgb4-next'David S. Miller
Hariprasad Shenai says: ==================== cxgb4: Use new BAR2 GTS for T5, adds adaptive rx and few Device ID's This patch series adds support to use new BAR2 GTS for T5 adapter. Adds support for adaptive rx. Remove redundant variable from a macro of cxgb4vf driver. Adds Device ID for new adapters. The patches series is created against 'net-next' tree. And includes patches on cxgb4 and cxgb4vf driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28cxgb4: Add support for adaptive rxHariprasad Shenai
Based on original work by Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28cxgb4/cxgb4vf: Add Devicde ID for two more adapterHariprasad Shenai
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28cxgb4vf: Remove superfluous "idx" parameter of CH_DEVICE() macro.Hariprasad Shenai
Remove redundant idx parameter of CH_DEVICE() macro, its always zero. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28cxgb4: Use BAR2 Going To Sleep (GTS) for T5 and later.Hariprasad Shenai
Use BAR2 GTS for T5. If we are on T4 use the old doorbell mechanism; otherwise ue the new BAR2 mechanism. Use BAR2 doorbells for refilling FL's. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28arp: Do not perturb drop profiles with ignored ARP packetsRick Jones
We do not wish to disturb dropwatch or perf drop profiles with an ARP we will ignore. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28net_sched: remove the first parameter from tcf_exts_destroy()WANG Cong
Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <hadi@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28mlx4: exploit skb->xmit_more to conditionally send doorbellEric Dumazet
skb->xmit_more tells us if another skb is coming next. We need to send doorbell when : xmit_more is not set, or txqueue is stopped (preventing next skb to come immediately) Tested with a modified pktgen version, I got a 40% increase of throughput. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28Merge branch 'r8152'David S. Miller
Hayes Wang says: ==================== r8152: support setting eee by ethtool Modify some definitions about EEE, and add the support of setting the EEE through ethtool. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28r8152: support ethtool eeehayeswang
Support get_eee() and set_eee() of ethtool_ops. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28r8152: add functions to set EEEhayeswang
Add functions to enable EEE and set EEE advertisement. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28r8152: change the EEE definitionhayeswang
Replace the EEE definitions with the ones which is declared in "mdio.h". Chage some definitions to make them readable. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28Merge branch 'defxx-next'David S. Miller
Maciej W. Rozycki says: ==================== defxx: DEFEA fixes and updates I have finally got my hands on an EISA variation of the board (DEC FDDIcontroller/EISA aka DEFEA) and was able to do some testing. Here are initial updates to the driver that address problems I encountered so far. More to come later on as I get back to the system that I have in a remote location -- I need to double-check MMIO support and see what might have been causing spurious interrupts I saw with the 8259A PIC the board's interrupt line has been routed to. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28defxx: DEFEA's ESIC port I/O decoding cleanupMaciej W. Rozycki
Use the slot-specific I/O range for decoding accesses to PDQ ASIC registers (IOCS0) and the discrete Burst Holdoff register (IOCS1) as per the "HD64981F EISA Slave Interface Controller (ESIC)" datasheet. Use disjoint decode ranges now that the assignment of chip selects is known. Update the span of the port I/O resource requested accordingly. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28defxx: DEFEA's Burst Holdoff register initialization fixMaciej W. Rozycki
Use the mask rather than bit number macro to initialize the chip select control bit for PDQ register space decoding in the Burst Holdoff register. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28defxx: Correct DEFEA's ESIC port I/O accessesMaciej W. Rozycki
Reverse the order of arguments to `outb', data to write comes first. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2014-09-25 1) Remove useless hash_resize_mutex in xfrm_hash_resize(). This mutex is used only there, but xfrm_hash_resize() can't be called concurrently at all. From Ying Xue. 2) Extend policy hashing to prefixed policies based on prefix lenght thresholds. From Christophe Gouault. 3) Make the policy hash table thresholds configurable via netlink. From Christophe Gouault. 4) Remove the maximum authentication length for AH. This was needed to limit stack usage. We switched already to allocate space, so no need to keep the limit. From Herbert Xu. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28Merge branch 'dsa_eee'David S. Miller
Florian Fainelli says: ==================== net: dsa: EEE and other PM features This patch set allows DSA switch drivers to enable/disable/query EEE on a per-port level, as well as control precisely which switch ports are enable/disabled. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28net: dsa: bcm_sf2: add support for controlling EEEFlorian Fainelli
When EEE is enabled, negotiate this feature with the PHY and make sure that the capability checking, local EEE advertisement, link partner EEE advertisement and auto-negotiation resolution returned by phy_init_eee() is positive, and enable EEE at the switch level. While querying the current EEE settings, verify the low-power indication and indicate its status. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28net: dsa: allow switches driver to implement get/set EEEFlorian Fainelli
Allow switches driver to query and enable/disable EEE on a per-port basis by implementing the ethtool_{get,set}_eee settings and delegating these operations to the switch driver. set_eee() will need to coordinate with the PHY driver to make sure that EEE is enabled, the link-partner supports it and the auto-negotiation result is satisfactory. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28net: dsa: bcm_sf2: add port_enable/disable callbacksFlorian Fainelli
The SF2 switch driver is already architected around per-port enable/disable callbacks, so we just need a slight update to our existing bcm_sf2_port_setup() resp. bcm_sf2_port_disable() functions to be suitable as callbacks for port_enable/port_disable. We need to shuffle a little the code that does the per-port VLAN configuration/isolation since ports can now be brought up/down separately, so we need to make sure that IMP (CPU, management) port is always included in that specific port setup. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28net: dsa: bcm_sf2: disable RGMII interface(s) when link is downFlorian Fainelli
When the link is down, disable the RGMII interface to conserve as much power as possible. We re-enable the RGMII interface whenever the link is detected. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28net: dsa: allow enabling and disable switch portsFlorian Fainelli
Whenever a per-port network device is used/unused, invoke the switch driver port_enable/port_disable callbacks to allow saving as much power as possible by disabling unused parts of the switch (RX/TX logic, memory arrays, PHYs...). We supply a PHY device argument to make sure the switch driver can act on the PHY device if needed (like putting/taking the PHY out of deep low power mode). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28net: dsa: start and stop the PHY state machineFlorian Fainelli
dsa_slave_open() should start the PHY library state machine for its PHY interface, and dsa_slave_close() should stop the PHY library state machine accordingly. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28tcp: use tcp_flags in tcp_data_queue()Peter Pan(潘卫平)
This patch is a cleanup which follows the idea in commit e11ecddf5128 (tcp: use TCP_SKB_CB(skb)->tcp_flags in input path), and it may reduce register pressure since skb->cb[] access is fast, bacause skb is probably in a register. v2: remove variable th v3: reword the changelog Signed-off-by: Weiping Pan <panweiping3@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28tcp: change tcp_skb_pcount() locationEric Dumazet
Our goal is to access no more than one cache line access per skb in a write or receive queue when doing the various walks. After recent TCP_SKB_CB() reorganizations, it is almost done. Last part is tcp_skb_pcount() which currently uses skb_shinfo(skb)->gso_segs, which is a terrible choice, because it needs 3 cache lines in current kernel (skb->head, skb->end, and shinfo->gso_segs are all in 3 different cache lines, far from skb->cb) This very simple patch reuses space currently taken by tcp_tw_isn only in input path, as tcp_skb_pcount is only needed for skb stored in write queue. This considerably speeds up tcp_ack(), granted we avoid shinfo->tx_flags to get SKBTX_ACK_TSTAMP, which seems possible. This also speeds up all sack processing in general. This speeds up tcp_sendmsg() because it no longer has to access/dirty shinfo. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28Merge branch 'tcp_skb_cb'David S. Miller
Eric Dumazet says: ==================== tcp: better TCP_SKB_CB layout TCP had the assumption that IPCB and IP6CB are first members of skb->cb[] This is fine, except that IPCB/IP6CB are used in TCP for a very short time in input path. What really matters for TCP stack is to get skb->next, TCP_SKB_CB(skb)->seq, and TCP_SKB_CB(skb)->end_seq in the same cache line. skb that are immediately consumed do not care because whole skb->cb[] is hot in cpu cache, while skb that sit in wocket write queue or receive queues do not need TCP_SKB_CB(skb)->header at all. This patch set implements the prereq for IPv4, IPv6, and TCP to make this possible. This makes TCP more efficient. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28tcp: better TCP_SKB_CB layout to reduce cache line missesEric Dumazet
TCP maintains lists of skb in write queue, and in receive queues (in order and out of order queues) Scanning these lists both in input and output path usually requires access to skb->next, TCP_SKB_CB(skb)->seq, and TCP_SKB_CB(skb)->end_seq These fields are currently in two different cache lines, meaning we waste lot of memory bandwidth when these queues are big and flows have either packet drops or packet reorders. We can move TCP_SKB_CB(skb)->header at the end of TCP_SKB_CB, because this header is not used in fast path. This allows TCP to search much faster in the skb lists. Even with regular flows, we save one cache line miss in fast path. Thanks to Christoph Paasch for noticing we need to cleanup skb->cb[] (IPCB/IP6CB) before entering IP stack in tx path, and that I forgot IPCB use in tcp_v4_hnd_req() and tcp_v4_save_options(). Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28ipv6: add a struct inet6_skb_parm param to ipv6_opt_accepted()Eric Dumazet
ipv6_opt_accepted() assumes IP6CB(skb) holds the struct inet6_skb_parm that it needs. Lets not assume this, as TCP stack might use a different place. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28ipv4: rename ip_options_echo to __ip_options_echo()Eric Dumazet
ip_options_echo() assumes struct ip_options is provided in &IPCB(skb)->opt Lets break this assumption, but provide a helper to not change all call points. ip_send_unicast_reply() gets a new struct ip_options pointer. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26net : optimize skb_release_data()Eric Dumazet
Cache skb_shinfo(skb) in a variable to avoid computing it multiple times. Reorganize the tests to remove one indentation level. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26sparc: bpf_jit: add support for BPF_LD(X) | BPF_LEN instructionsAlexei Starovoitov
BPF_LD | BPF_W | BPF_LEN instruction is occasionally used by tcpdump and present in 11 tests in lib/test_bpf.c Teach sparc JIT compiler to emit it. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26net: bcmgenet: Fix compile warningTobias Klauser
bcmgenet_wol_resume() is only used in bcmgenet_resume(), which is only defined when CONFIG_PM_SLEEP is enabled. This leads to the following compile warning when building with !CONFIG_PM_SLEEP: drivers/net/ethernet/broadcom/genet/bcmgenet.c:1967:12: warning: ‘bcmgenet_wol_resume’ defined but not used [-Wunused-function] Since bcmgenet_resume() is the only user of bcmgenet_wol_resume(), fix this by directly inlining the function there. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26net/openvswitch: remove dup comment in vport.hWang Sheng-Hui
Remove the duplicated comment "/* The following definitions are for users of the vport subsytem: */" in vport.h Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2014-09-23 This patch series adds support for the FM10000 Ethernet switch host interface. The Intel FM10000 Ethernet Switch is a 48-port Ethernet switch supporting both Ethernet ports and PCI Express host interfaces. The fm10k driver provides support for the host interface portion of the switch, both PF and VF. As the host interfaces are directly connected to the switch this results in some significant differences versus a standard network driver. For example there is no PHY or MII on the device. Since packets are delivered directly from the switch to the host interface these are unnecessary. Otherwise most of the functionality is very similar to our other network drivers such as ixgbe or igb. For example we support all the standard network offloads, jumbo frames, SR-IOV (64 VFS), PTP, and some VXLAN and NVGRE offloads. v2: converted dev_consume_skb_any() to dev_kfree_skb_any() fix up PTP code based on feedback from the community v3: converted the use of smb_mb__before_clear_bit() to smb_mb__before_atomic() added vmalloc header to patch 15 added prefetch header to patch 16 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26net: optimise inet_proto_csum_replace4()LEROY Christophe
csum_partial() is a generic function which is not optimised for small fixed length calculations, and its use requires to store "from" and "to" values in memory while we already have them available in registers. This also has impact, especially on RISC processors. In the same spirit as the change done by Eric Dumazet on csum_replace2(), this patch rewrites inet_proto_csum_replace4() taking into account RFC1624. I spotted during a NATted tcp transfert that csum_partial() is one of top 5 consuming functions (around 8%), and the second user of csum_partial() is inet_proto_csum_replace4(). Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26net: optimise csum_replace4()LEROY Christophe
csum_partial() is a generic function which is not optimised for small fixed length calculations, and its use requires to store "from" and "to" values in memory while we already have them available in registers. This also has impact, especially on RISC processors. In the same spirit as the change done by Eric Dumazet on csum_replace2(), this patch rewrites inet_proto_csum_replace4() taking into account RFC1624. I spotted during a NATted tcp transfert that csum_partial() is one of top 5 consuming functions (around 8%), and the second user of csum_partial() is inet_proto_csum_replace4(). I have proposed the same modification to inet_proto_csum_replace4() in another patch. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26Merge branch 'fec'David S. Miller
Fugang Duan says: ==================== net: fec: Code cleanup This patches does several things: - Fixing multiqueue issue. - Removing the unnecessary errata workaround. - Aligning the data buffer dma map/unmap size. - Freeing resource after probe failed. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26net: fec: free resource after phy probe failedNimrod Andy
Free memory and disable all related clocks when there has no phy connection or phy probe failed. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26net: fec: align rx data buffer size for dma map/unmapNimrod Andy
Align allocated rx data buffer size for dma map/unmap, otherwise kernel print warning when enable DMA_API_DEBUG. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26net: fec: remove the ERR006358 workaround for imx6sx enetNimrod Andy
Remove the ERR006358 workaround for imx6sx enet since the hw issue was fixed on the SOC. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26net: fec: Add Ftype to BD to distiguish three tx queues for AVBNimrod Andy
The current driver loss Ftype field init for BD, which cause tx queue #1 and #2 cannot work well. Add Ftype field to BD to distiguish three queues for AVB: 0 -> Best Effort 1 -> ClassA 2 -> ClassB Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-16 05:19:07 +0000