summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-04-24proc: Put thread_pid in release_task not proc_flush_pidEric W. Biederman
Oleg pointed out that in the unlikely event the kernel is compiled with CONFIG_PROC_FS unset that release_task will now leak the pid. Move the put_pid out of proc_flush_pid into release_task to fix this and to guarantee I don't make that mistake again. When possible it makes sense to keep get and put in the same function so it can easily been seen how they pair up. Fixes: 7bc3e6e55acf ("proc: Use a list of inodes to flush from proc") Reported-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-04-24Merge tag 'pm-5.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Restore an optimization related to asynchronous suspend and resume of devices during system-wide power transitions that was disabled by mistake (Kai-Heng Feng) and update the pm-graph suite of power management utilities (Todd Brandt)" * tag 'pm-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: sleep: core: Switch back to async_schedule_dev() pm-graph v5.6
2020-04-24Merge tag 'pnp-5.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull PNP cleanup from Rafael Wysocki: "Make the PNP code use list_for_each_entry() in a few places instead of open-coding it (Jason Gunthorpe)" * tag 'pnp-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: pnp: Use list_for_each_entry() instead of open coding
2020-04-24Merge tag 'acpi-5.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "Drop a lid status quirk for Asus T200TA that is not necessary any more and clean up a resource management inconsistency in the PCI IRQ link configuration code. Both changes from Hans de Goede" * tag 'acpi-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: button: Drop no longer necessary Asus T200TA lid_init_state quirk ACPI/PCI: pci_link: use extended_irq union member when setting ext-irq shareable
2020-04-24mm: check that mm is still valid in madvise()Linus Torvalds
IORING_OP_MADVISE can end up basically doing mprotect() on the VM of another process, which means that it can race with our crazy core dump handling which accesses the VM state without holding the mmap_sem (because it incorrectly thinks that it is the final user). This is clearly a core dumping problem, but we've never fixed it the right way, and instead have the notion of "check that the mm is still ok" using mmget_still_valid() after getting the mmap_sem for writing in any situation where we're not the original VM thread. See commit 04f5866e41fb ("coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping") for more background on this whole mmget_still_valid() thing. You might want to have a barf bag handy when you do. We're discussing just fixing this properly in the only remaining core dumping routines. But even if we do that, let's make do_madvise() do the right thing, and then when we fix core dumping, we can remove all these mmget_still_valid() checks. Reported-and-tested-by: Jann Horn <jannh@google.com> Fixes: c1ca757bd6f4 ("io_uring: add IORING_OP_MADVISE") Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-24Merge tag 'mac80211-for-net-2020-04-24' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just three changes: * fix a wrong GFP_KERNEL in hwsim * fix the debugfs mess after the mac80211 registration race fix * suppress false-positive RCU list lockdep warnings ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-24Merge tag 'wireless-drivers-2020-04-24' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.7 Second set of fixes for v5.7. Quite a few iwlwifi fixes and some maintainers file updates. iwlwifi * fix a bug with kmemdup() error handling * fix a DMA pool warning about unfreed memory * fix beacon statistics * fix a theoritical bug in device initialisation * fix queue limit handling and inactive TID removal * disable ACK Enabled Aggregation which was enabled by accident * fix transmit power setting reading from BIOS with certain versions ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-24Merge tag 'io_uring-5.7-2020-04-24' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fix from Jens Axboe: "Single fixup for a change that went into -rc2" * tag 'io_uring-5.7-2020-04-24' of git://git.kernel.dk/linux-block: io_uring: only restore req->work for req that needs do completion
2020-04-24Merge tag 'libata-5.7-2020-04-24' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull libata fixlet from Jens Axboe: "Minor spelling error fix for libata" * tag 'libata-5.7-2020-04-24' of git://git.kernel.dk/linux-block: ata: sata_inic162x fix a spelling issue
2020-04-24Merge tag 'block-5.7-2020-04-24' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A few fixes/changes that should go into this release: - null_blk zoned fixes (Damien) - blkdev_close() sync improvement (Douglas) - Fix regression in blk-iocost that impacted (at least) systemtap (Waiman) - Comment fix, header removal (Zhiqiang, Jianpeng)" * tag 'block-5.7-2020-04-24' of git://git.kernel.dk/linux-block: null_blk: Cleanup zoned device initialization null_blk: Fix zoned command handling block: remove unused header blk-iocost: Fix error on iocost_ioc_vrate_adj bdev: Reduce time holding bd_mutex in sync in blkdev_close() buffer: remove useless comment and WB_REASON_FREE_MORE_MEM, reason.
2020-04-24Merge tag 'trace-v5.7-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "A few tracing fixes: - Two fixes for memory leaks detected by kmemleak - Removal of some dead code - A few local functions turned static" * tag 'trace-v5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Convert local functions in tracing_map.c to static tracing: Remove DECLARE_TRACE_NOARGS ftrace: Fix memory leak caused by not freeing entry in unregister_ftrace_direct() tracing: Fix memory leaks in trace_events_hist.c
2020-04-24Merge branch 'acpi-pci'Rafael J. Wysocki
* acpi-pci: ACPI/PCI: pci_link: use extended_irq union member when setting ext-irq shareable
2020-04-24Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Ensure context synchronisation after a write to APIAKey. - Fix bullet list formatting in Documentation/arm64/amu.rst to eliminate doc warnings. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: Documentation: arm64: fix amu.rst doc warnings arm64: sync kernel APIAKey when installing
2020-04-24Merge branch 'pm-tools'Rafael J. Wysocki
* pm-tools: pm-graph v5.6
2020-04-24Merge tag 'kbuild-fixes-v5.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - fix scripts/config to properly handle ':' in string type CONFIG options - fix unneeded rebuilds of DT schema check rule - git rid of ordering dependency between <linux/vermagic.h> and <linux/module.h> to fix build errors in some network drivers - clean up generated headers of host arch with 'make ARCH=um mrproper' * tag 'kbuild-fixes-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: h8300: ignore vmlinux.lds Documentation: kbuild: fix the section title format um: ensure `make ARCH=um mrproper` removes arch/$(SUBARCH)/include/generated/ arch: split MODULE_ARCH_VERMAGIC definitions out to <asm/vermagic.h> kbuild: fix DT binding schema rule again to avoid needless rebuilds scripts/config: allow colons in option strings for sed
2020-04-24Merge tag 'afs-fixes-20200424' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull misc AFS fixes from David Howells: "Three miscellaneous fixes to the afs filesystem: - Remove some struct members that aren't used, aren't set or aren't read, plus a wake up that nothing ever waits for. - Actually set the AFS_SERVER_FL_HAVE_EPOCH flag so that the code that depends on it can work. - Make a couple of waits uninterruptible if they're done for an operation that isn't supposed to be interruptible" * tag 'afs-fixes-20200424' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: Make record checking use TASK_UNINTERRUPTIBLE when appropriate afs: Fix to actually set AFS_SERVER_FL_HAVE_EPOCH afs: Remove some unused bits
2020-04-24Merge tag 'sound-5.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This became a slightly big pull request, as the accumulated ASoC fixes are included here. Some highlights: - Revert of ASoC DAI startup changes that caused regression on some x86 platforms - Regression fix in HD-audio power management and driver blacklist - A collection of ASoC DAPM and topology fixes - Continued USB-audio fixes and quirks - Lots of small device-specific fixes - Rockchip S/PDIF DT stuff update for validation issues" * tag 'sound-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (51 commits) ALSA: hda: Always use jackpoll helper for jack update after resume ALSA: hda/realtek - Add new codec supported for ALC245 ALSA: usb-audio: Fix usb audio refcnt leak when getting spdif ALSA: usb-audio: Add connector notifier delegation ALSA: usb-audio: Apply async workaround for Scarlett 2i4 2nd gen ASoC: wm8960: Fix wrong clock after suspend & resume ALSA: usx2y: Fix potential NULL dereference ALSA: usb-audio: Add quirk for Focusrite Scarlett 2i2 ASoC: wm89xx: Add missing dependency ASoC: dapm: fixup dapm kcontrol widget ASoC: rsnd: Fix "status check failed" spam for multi-SSI ASoC: rsnd: Don't treat master SSI in multi SSI setup as parent ASoC: meson: gx-card: fix codec-to-codec link setup ASoC: meson: axg-card: fix codec-to-codec link setup ALSA: usb-audio: Add static mapping table for ALC1220-VB-based mobos ALSA: hda: Remove ASUS ROG Zenith from the blacklist ALSA: hda/realtek - Fix unexpected init_amp override ALSA: usb-audio: Filter out unsupported sample rates on Focusrite devices ASoC: SOF: Intel: add min/max channels for SSP on Baytrail/Broadwell ASoC: stm32: sai: fix sai probe ...
2020-04-24Merge tag 'drm-fixes-2020-04-24' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Weekly regular fixes for drm, The usual rc3 uptick here, but nothing too crazy or notable. core: - mst: zero pbn when releasing vcpi slots amdgpu: - Fix resume issue on renoir - Thermal fix for older CI dGPUs - Fix some fallout from dropping drm load/unload callbacks i915: - Tigerlake Workaround - disabling media recompression (Matt) - Fix RPS interrupts for right GPU frequency (Chris) - HDCP fix prime check (Oliver) - Tigerlake Thunderbolt power well fix (Matt) - Tigerlake DP link training fixes (Jose) - Documentation sphinx build fix (Jani) - Fix enable_dpcd_backlight modparam (Lyude) analogix-dp: - binding fix meson: - remove unneeded error message bindings: - fix warnings - fix lvds binding scheduler: - thread racing fix tidss: - use after free fix" * tag 'drm-fixes-2020-04-24' of git://anongit.freedesktop.org/drm/drm: drm/i915/dpcd_bl: Unbreak enable_dpcd_backlight modparam drm/i915: fix Sphinx build duplicate label warning drm/i915/display: Load DP_TP_CTL/STATUS offset before use it drm/i915/tgl: TBT AUX should use TC power well ops drm/i915: HDCP: fix Ri prime check done during link check drm/i915/gt: Update PMINTRMSK holding fw drm/i915/tgl: Add Wa_14010477008:tgl drm/tidss: fix crash related to accessing freed memory drm/dp_mst: Zero assigned PBN when releasing VCPI slots drm/amdgpu/display: give aux i2c buses more meaningful names drm/amdgpu/display: fix aux registration (v2) drm/amdgpu: Correctly initialize thermal controller for GPUs with Powerplay table v0 (e.g Hawaii) drm/amd/powerplay: fix resume failed as smu table initialize early exit drm/scheduler: fix drm_sched_get_cleanup_job drm/meson: Delete an error message in meson_dw_hdmi_bind() drm/bridge: anx6345: set correct BPC for display_info of connector dt-bindings: display: allow port and ports in panel-lvds dt-bindings: display: xpp055c272: Remove the reg property dt-bindings: display: ltk500hd1829: Remove the reg property drm/bridge: analogix_dp: Split bind() into probe() and real bind()
2020-04-24afs: Make record checking use TASK_UNINTERRUPTIBLE when appropriateDavid Howells
When an operation is meant to be done uninterruptibly (such as FS.StoreData), we should not be allowing volume and server record checking to be interrupted. Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-24afs: Fix to actually set AFS_SERVER_FL_HAVE_EPOCHDavid Howells
AFS keeps track of the epoch value from the rxrpc protocol to note (a) when a fileserver appears to have restarted and (b) when different endpoints of a fileserver do not appear to be associated with the same fileserver (ie. all probes back from a fileserver from all of its interfaces should carry the same epoch). However, the AFS_SERVER_FL_HAVE_EPOCH flag that indicates that we've received the server's epoch is never set, though it is used. Fix this to set the flag when we first receive an epoch value from a probe sent to the filesystem client from the fileserver. Fixes: 3bf0fb6f33dd ("afs: Probe multiple fileservers simultaneously") Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-24afs: Remove some unused bitsDavid Howells
Remove three bits: (1) afs_server::no_epoch is neither set nor used. (2) afs_server::have_result is set and a wakeup is applied to it, but nothing looks at it or waits on it. (3) afs_vl_dump_edestaddrreq() prints afs_addr_list::probed, but nothing sets it for VL servers. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-24mac80211: sta_info: Add lockdep condition for RCU list usageMadhuparna Bhowmik
The function sta_info_get_by_idx() uses RCU list primitive. It is called with local->sta_mtx held from mac80211/cfg.c. Add lockdep expression to avoid any false positive RCU list warnings. Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Link: https://lore.kernel.org/r/20200409082906.27427-1-madhuparnabhowmik10@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24mac80211: populate debugfs only after cfg80211 initJohannes Berg
When fixing the initialization race, we neglected to account for the fact that debugfs is initialized in wiphy_register(), and some debugfs things went missing (or rather were rerooted to the global debugfs root). Fix this by adding debugfs entries only after wiphy_register(). This requires some changes in the rate control code since it currently adds debugfs at alloc time, which can no longer be done after the reordering. Reported-by: Jouni Malinen <j@w1.fi> Reported-by: kernel test robot <rong.a.chen@intel.com> Reported-by: Hauke Mehrtens <hauke@hauke-m.de> Reported-by: Felix Fietkau <nbd@nbd.name> Cc: stable@vger.kernel.org Fixes: 52e04b4ce5d0 ("mac80211: fix race in ieee80211_register_hw()") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Sumit Garg <sumit.garg@linaro.org> Link: https://lore.kernel.org/r/20200423111344.0e00d3346f12.Iadc76a03a55093d94391fc672e996a458702875d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-23Merge branch 'ovs-meter-tables'David S. Miller
Tonghao Zhang says: ==================== openvswitch: expand meter tables and fix bug The patch set expand or shrink the meter table when necessary. and other patches fix bug or improve codes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: openvswitch: use u64 for meter bucketTonghao Zhang
When setting the meter rate to 4+Gbps, there is an overflow, the meters don't work as expected. Cc: Pravin B Shelar <pshelar@ovn.org> Cc: Andy Zhou <azhou@ovn.org> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: openvswitch: make EINVAL return value more obviousTonghao Zhang
Cc: Pravin B Shelar <pshelar@ovn.org> Cc: Andy Zhou <azhou@ovn.org> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: openvswitch: remove the unnecessary checkTonghao Zhang
Before invoking the ovs_meter_cmd_reply_stats, "meter" was checked, so don't check it agin in that function. Cc: Pravin B Shelar <pshelar@ovn.org> Cc: Andy Zhou <azhou@ovn.org> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: openvswitch: set max limitation to metersTonghao Zhang
Don't allow user to create meter unlimitedly, which may cause to consume a large amount of kernel memory. The max number supported is decided by physical memory and 20K meters as default. Cc: Pravin B Shelar <pshelar@ovn.org> Cc: Andy Zhou <azhou@ovn.org> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: openvswitch: expand the meters supported numberTonghao Zhang
In kernel datapath of Open vSwitch, there are only 1024 buckets of meter in one datapath. If installing more than 1024 (e.g. 8192) meters, it may lead to the performance drop. But in some case, for example, Open vSwitch used as edge gateway, there should be 20K at least, where meters used for IP address bandwidth limitation. [Open vSwitch userspace datapath has this issue too.] For more scalable meter, this patch use meter array instead of hash tables, and expand/shrink the array when necessary. So we can install more meters than before in the datapath. Introducing the struct *dp_meter_instance, it's easy to expand meter though changing the *ti point in the struct *dp_meter_table. Cc: Pravin B Shelar <pshelar@ovn.org> Cc: Andy Zhou <azhou@ovn.org> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-24Merge tag 'drm-misc-fixes-2020-04-23' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes A few resources-related fixes (tidss, dp_mst, scheduler), probe fixes and DT bindings adjustments. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200423103224.7hvyr3v7dmuny2bz@gilmour.lan
2020-04-24Merge tag 'drm-intel-fixes-2020-04-23' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Tigerlake Workaround - disabling media recompression (Matt) - Fix RPS interrupts for right GPU frequency (Chris) - HDCP fix prime check (Oliver) - Tigerlake Thunderbolt power well fix (Matt) - Tigerlake DP link training fixes (Jose) - Documentation sphinx build fix (Jani) - Fix enable_dpcd_backlight modparam (Lyude) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200423190246.GA1710303@intel.com
2020-04-24Merge tag 'amd-drm-fixes-5.7-2020-04-22' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.7-2020-04-22: amdgpu: - Fix resume issue on renoir - Thermal fix for older CI dGPUs - Fix some fallout from dropping drm load/unload callbacks Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200422224647.617724-1-alexander.deucher@amd.com
2020-04-23net: bcmgenet: correct per TX/RX ring statisticsDoug Berger
The change to track net_device_stats per ring to better support SMP missed updating the rx_dropped member. The ndo_get_stats method is also needed to combine the results for ethtool statistics (-S) before filling in the ethtool structure. Fixes: 37a30b435b92 ("net: bcmgenet: Track per TX/RX rings statistics") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: meth: remove spurious copyright textJonathan Corbet
Evidently, at some point in the pre-githistorious past, drivers/net/ethernet/sgi/meth.h somehow contained some code from the "snull" driver from the Linux Device Drivers book. A comment crediting that source, asserting copyright ownership by the LDD authors, and imposing the LDD2 license terms was duly added to the file. Any code that may have been derived from snull is long gone, and the distribution terms are not GPL-compatible. Since the copyright claim is not based in fact (if it ever was), simply remove it and the distribution terms as well. Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Alessandro Rubini <rubini@gnudd.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: Kate Stewart <kstewart@linuxfoundation.org> CC: "Fendt, Oliver" <oliver.fendt@siemens.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: phy: bcm54140: fix less than zero comparison on an unsignedColin Ian King
Currently the unsigned variable tmp is being checked for an negative error return from the call to bcm_phy_read_rdb and this can never be true since tmp is unsigned. Fix this by making tmp a plain int. Addresses-Coverity: ("Unsigned compared against 0") Fixes: 4406d36dfdf1 ("net: phy: bcm54140: add hwmon support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Michael Walle <michael@walle.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: phy: bcm84881: clear settings on link downRussell King
Clear the link partner advertisement, speed, duplex and pause when the link goes down, as other phylib drivers do. This avoids the stale link partner, speed and duplex settings being reported via ethtool. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23qed: Make ll2_cbs staticZou Wei
Fix the following sparse warning: drivers/net/ethernet/qlogic/qed/qed_ll2.c:2334:20: warning: symbol 'll2_cbs' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Acked-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23chcr: Fix CPU hard lockupRohit Maheshwari
Soft lock should be taken in place of hard lock. Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: sched : Remove unnecessary cast in kfreeXu Wang
Remove unnecassary casts in the argument to kfree. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net/x25: Fix x25_neigh refcnt leak when receiving frameXiyu Yang
x25_lapb_receive_frame() invokes x25_get_neigh(), which returns a reference of the specified x25_neigh object to "nb" with increased refcnt. When x25_lapb_receive_frame() returns, local variable "nb" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one path of x25_lapb_receive_frame(). When pskb_may_pull() returns false, the function forgets to decrease the refcnt increased by x25_get_neigh(), causing a refcnt leak. Fix this issue by calling x25_neigh_put() when pskb_may_pull() returns false. Fixes: cb101ed2c3c7 ("x25: Handle undersized/fragmented skbs") Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23mptcp/pm_netlink.c : add check for nla_put_in/6_addrBo YU
Normal there should be checked for nla_put_in6_addr like other usage in net. Detected by CoverityScan, CID# 1461639 Fixes: 01cacb00b35c ("mptcp: add netlink-based PM") Signed-off-by: Bo YU <tsu.yubo@gmail.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: ethernet: ixp4xx: Add error handling in ixp4xx_eth_probe()Tang Bin
The function ixp4xx_eth_probe() does not perform sufficient error checking after executing devm_ioremap_resource(), which can result in crashes if a critical error path is encountered. Fixes: f458ac479777 ("ARM/net: ixp4xx: Pass ethernet physical base as resource") Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull SIGCHLD fix from Eric Biederman: "Christof Meerwald reported that do_notify_parent has not been successfully populating si_pid and si_uid for multi-threaded processes. This is the one-liner fix. Strictly speaking a one-liner plus comment" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: signal: Avoid corrupting si_pid and si_uid in do_notify_parent
2020-04-23Merge branch 'net-ethernet-ti-cpts-add-irq-and-HW_TS_PUSH-events'David S. Miller
Grygorii Strashko says: ==================== net: ethernet: ti: cpts: add irq and HW_TS_PUSH events This is re-spin of patches to add CPSW IRQ and HW_TS_PUSH events support I've sent long time ago [1]. In this series, I've tried to restructure and split changes, and also add few additional optimizations comparing to initial RFC submission [1]. The HW_TS_PUSH events intended to serve for different timesync purposes on of which is to add PPS generation function, which can be implemented as below: +-----------------+ | Control | | application | +------->+ +----------+ | | | | | | | | | +-----------------+ | | | | | | PTP_EXTTS_REQUEST | | | | | +----------------------------------------------------------------+ | | Kernel +-------+----------+ +-------v--------+ | \dev\ptpX | | /sys/class/pwm/| | | | | +-------^----------+ +-------+--------+ | | | | | +-------v-------------------+ +-------+----------+ | | | CPTS driver | |pwm/pwm-omap-dmtimer.c | | | +---------------------------+ +-------^----------+ |clocksource/timer_ti_dm.c | | +-------+-------------------+ |HWx_TS_PUSH evt | +----------------------------------------------------------------+ | | HW +-------+----------+ +-------v--------+ | CPTS | | DMTimer | | | | | | HWx_TS_PUSH X<-----------------+ | | + | | +------------------+ +-------+--------+ | X timer4 As per my knowledge there is at least one public implemented above PPS generation schema from Tusori Tibor [2] based on initial HW_TS_PUSH enable submission[1]. And now there is work done by Lokesh Vutla <lokeshvutla@ti.com> published to enable PWM enable/improve PWM adjustment from user space [3][4][5]. Main changes comparing to initial submission: - TX timestamp processing deferred to ptp worker only - both CPTS IRQ and polling events processing supported to make it work for Keystone 2 also - switch to use new .gettimex64() interface - no DT updates as number of HWx_TS_PUSH inputs is static per HW Testing on am571x-idk/omap2plus_defconfig/+CONFIG_PREEMPT=y: 1) testing HW_TS_PUSH - enable pwm in DT pwm16: dmtimer-pwm { compatible = "ti,omap-dmtimer-pwm"; ti,timers = <&timer16>; #pwm-cells = <3>; }; - configure and start pwm echo 0 > /sys/class/pwm/pwmchip0/export echo 1000000000 > /sys/class/pwm/pwmchip0/pwm0/period echo 500000000 > /sys/class/pwm/pwmchip0/pwm0/duty_cycle echo 1 > /sys/class/pwm/pwmchip0/pwm0/enable - test HWx_TS_PUSH using Kernel selftest testptp application ./tools/testing/selftests/ptp/testptp -d /dev/ptp0 -e 1000 -i 3 2) testing phc2sys phc2sys[1616.791]: eth0 rms 408190379792180864 max 1580914543017209856 freq +864 +/- 4635 delay 645 +/- 29 phc2sys[1646.795]: eth0 rms 41 max 108 freq +0 +/- 36 delay 656 +/- 29 phc2sys[1676.800]: eth0 rms 43 max 83 freq +2 +/- 38 delay 650 +/- 0 phc2sys[1706.804]: eth0 rms 39 max 87 freq +4 +/- 34 delay 672 +/- 55 phc2sys[1736.808]: eth0 rms 35 max 66 freq +1 +/- 30 delay 667 +/- 49 phc2sys[1766.813]: eth0 rms 38 max 79 freq +2 +/- 33 delay 656 +/- 29 phc2sys[1796.817]: eth0 rms 45 max 98 freq +1 +/- 39 delay 656 +/- 29 phc2sys[1826.821]: eth0 rms 40 max 87 freq +5 +/- 35 delay 650 +/- 0 phc2sys[1856.826]: eth0 rms 29 max 76 freq -0 +/- 25 delay 656 +/- 29 phc2sys[1886.830]: eth0 rms 40 max 97 freq +4 +/- 35 delay 667 +/- 49 phc2sys[1916.834]: eth0 rms 42 max 94 freq +2 +/- 36 delay 661 +/- 41 phc2sys[1946.839]: eth0 rms 40 max 91 freq +2 +/- 35 delay 661 +/- 41 phc2sys[1976.843]: eth0 rms 46 max 88 freq -0 +/- 40 delay 667 +/- 49 phc2sys[2006.847]: eth0 rms 49 max 97 freq +2 +/- 43 delay 650 +/- 0 3) testing ptp4l - 1G connection ptp4l[862.891]: port 1: UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED ptp4l[923.894]: rms 1019697354682 max 5768279314068 freq +26053 +/- 72 delay 488 +/- 1 ptp4l[987.896]: rms 13 max 26 freq +26005 +/- 29 delay 488 +/- 1 ptp4l[1051.899]: rms 14 max 50 freq +25895 +/- 21 delay 488 +/- 1 ptp4l[1115.901]: rms 11 max 27 freq +25878 +/- 17 delay 488 +/- 1 ptp4l[1179.904]: rms 10 max 27 freq +25857 +/- 12 delay 488 +/- 1 ptp4l[1243.906]: rms 14 max 37 freq +25851 +/- 15 delay 488 +/- 1 ptp4l[1307.909]: rms 12 max 33 freq +25835 +/- 15 delay 488 +/- 1 ptp4l[1371.911]: rms 11 max 27 freq +25832 +/- 14 delay 488 +/- 1 ptp4l[1435.914]: rms 11 max 26 freq +25823 +/- 11 delay 488 +/- 1 ptp4l[1499.916]: rms 10 max 29 freq +25829 +/- 11 delay 489 +/- 1 ptp4l[1563.919]: rms 11 max 27 freq +25827 +/- 12 delay 488 +/- 1 - 10M connection ptp4l[51.955]: port 1: UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED ptp4l[112.957]: rms 279468848453933920 max 1580914542977391360 freq +25390 +/- 3207 delay 8222 +/- 36 ptp4l[176.960]: rms 254 max 522 freq +25809 +/- 219 delay 8271 +/- 30 ptp4l[240.962]: rms 271 max 684 freq +25868 +/- 234 delay 8249 +/- 22 ptp4l[304.965]: rms 263 max 556 freq +25894 +/- 227 delay 8225 +/- 47 ptp4l[368.967]: rms 238 max 648 freq +25908 +/- 204 delay 8234 +/- 40 ptp4l[432.970]: rms 274 max 658 freq +25932 +/- 237 delay 8241 +/- 22 ptp4l[496.972]: rms 247 max 557 freq +25943 +/- 213 delay 8223 +/- 26 ptp4l[560.974]: rms 291 max 756 freq +25968 +/- 251 delay 8244 +/- 41 ptp4l[624.977]: rms 249 max 697 freq +25975 +/- 216 delay 8258 +/- 22 Changes in v5: - fixed build issue Changes in v4: - fixed comments from Richard Cochran - dropped patch "net: ethernet: ti: cpts: move rx timestamp processing to ptp worker only" - added "Acked-by" from Richard Cochran <richardcochran@gmail.com> - dependencies resolved, patch merged Changes in v3: - fixed rebase mess - fixed build issues Changes in v2 (broken): - fixed (formatting) comments from David Miller <davem@davemloft.net> v4: https://patchwork.ozlabs.org/project/netdev/cover/20200422201254.15232-1-grygorii.strashko@ti.com/ v3: https://patchwork.ozlabs.org/project/netdev/cover/20200320194244.4703-1-grygorii.strashko@ti.com/ v2: https://patchwork.ozlabs.org/cover/1258339/ v1: https://patchwork.ozlabs.org/cover/1254708/ [1] https://lore.kernel.org/patchwork/cover/799251/ [2] https://usermanual.wiki/Document/SetupGuide.632280828.pdf https://github.com/t-tibor/msc_thesis [3] https://patchwork.kernel.org/cover/11421329/ [4] https://patchwork.kernel.org/cover/11433197/ [5] https://sourceforge.net/p/linuxptp/mailman/message/36943248/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: ethernet: ti: cpsw: enable cpts irqGrygorii Strashko
The CPSW misc IRQ need be enabled for CPTS event_pend IRQs processing. This patch adds corresponding support to CPSW driver. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: ethernet: ti: cpts: add support for HW_TS_PUSH eventsGrygorii Strashko
Hence CPTS IRQ support is in place the W_TS_PUSH events can be added. PWM capable DmTimers can be used to generete input signals for CPTS on TI AM335x/AM437x/DRA7 SoCs to be timestamped: AM335x/AM437x: timer4 - timer7 DRA7/AM57xx: timer13 - timer16 Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: ethernet: ti: cpts: add irq supportGrygorii Strashko
Add CPTS IRQ support, but do not enable it. By default, the CPTS driver will continue working using polling mode which is required for CPTS to continue working on platforms other than CPSW, like Keystone 2. The CPTS IRQ support is required to enable support for HW_TS_PUSH events. The CPSW CPTS IRQ and HW_TS_PUSH events support will be enabled in follow up patches. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: ethernet: ti: cpts: rework lockingGrygorii Strashko
Now spinlock is used to synchronize everything which is not required. Add mutex and use to sync access to PTP interface and PTP worker and use spinlock only to sync FIFO/events processing. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: ethernet: ti: cpts: move tx timestamp processing to ptp worker onlyGrygorii Strashko
Now the tx timestamp processing happens from different contexts - softirq and thread/PTP worker. Enabling IRQ will add one more hard_irq context. This makes over all defered TX timestamp processing and locking overcomplicated. Move tx timestamp processing to PTP worker always instead. napi_rx->cpts_tx_timestamp if ptp_packet then push to txq ptp_schedule_worker() do_aux_work->cpts_overflow_check cpts_process_events() Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: ethernet: ti: cpts: optimize packet to event matchingGrygorii Strashko
Now the CPTS driver performs packet (skb) parsing every time when it needs to match packet to CPTS event (including ptp_classify_raw() calls). This patch optimizes matching process by parsing packet only once upon arrival and stores PTP specific data in skb->cb using the same fromat as in CPTS HW event. As result, all future matching reduces to comparing two u32 values. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-16 19:14:53 +0000