| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Force PIO for ATAPI devices on VT6415/VT6330 as the controller locks
up on ATAPI DMA (Tasos)
- Fix ACPI PATA cable type detection such that the controller is not
forced down to a slow transfer mode (Tasos)
- Fix build error on 32-bit UML (Johannes)
- Fix a PCI region leak in the pata_macio driver so that the driver no
longer fails to load after rmmod (Philipp)
- Use correct DMI BIOS build date for ThinkPad W541 quirk (me)
- Disallow LPM for ASUSPRO-D840SA motherboard as this board
interestingly enough gets graphical corruptions on the iGPU when LPM
is enabled (me)
- Disallow LPM for Asus B550-F motherboard as this board will get
command timeouts on ports 5 and 6, yet LPM with the same drive works
fine on all other ports (Mikko)
* tag 'ata-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci: Disallow LPM for Asus B550-F motherboard
ata: ahci: Disallow LPM for ASUSPRO-D840SA motherboard
ata: ahci: Use correct BIOS build date for ThinkPad W541 quirk
ata: pata_macio: Fix PCI region leak
ata: pata_cs5536: fix build on 32-bit UML
ata: libata-acpi: Do not assume 40 wire cable if no devices are enabled
ata: pata_via: Force PIO for ATAPI devices on VT6415/VT6330
|
|
Missing the mutex init.
Fixes: 47454f2dc0bf ("drm/amdgpu: Register the new sdma function pointers for sdma_v5_2")
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ea685ff30a51a25dd9be90786933ada49a088f65)
|
|
q->gws is not updated atomically with qpd->mapped_gws_queue. If a
runlist is created between pqm_set_gws and update_queue it will
contain a queue which uses GWS in a process with no GWS allocated.
This will result in a scheduler hang.
Use q->properties.is_gws which is changed while holding the DQM lock.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b98370220eb3110e82248e3354e16a489a492cfb)
Cc: stable@vger.kernel.org
|
|
Missing the mutex init.
Fixes: e56d4bf57fab ("drm/amdgpu/: drm/amdgpu: Register the new sdma function pointers for sdma_v5_0")
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3f4caf092f02f0de169c6122639af481c7edc8f9)
|
|
Use the amdgpu fence container so we can store additional
data in the fence. This also fixes the start_time handling
for MCBP since we were casting the fence to an amdgpu_fence
and it wasn't.
Fixes: 3f4c175d62d8 ("drm/amdgpu: MCBP based on DRM scheduler (v9)")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bf1cd14f9e2e1fdf981eed273ddd595863f5288c)
Cc: stable@vger.kernel.org
|
|
This commit makes two key fixes to SDMA v4.4.2 handling:
1. disable UTC_L1 in sdma_cntl register when stopping SDMA engines
by reading the current value before modifying UTC_L1_ENABLE bit.
2. Ensure UTC_L1_ENABLE is consistently managed by:
- Adding the missing register write when enabling UTC_L1 during start
- Keeping UTC_L1 enabled by default as per hardware requirements
v2: Correct SDMA_CNTL setting (Philip)
Suggested-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 375bf564654e85a7b1b0657b191645b3edca1bda)
Cc: stable@vger.kernel.org
|
|
Make sure to release reset domain lock in case of failures.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Fixes: 11bb33766f66 ("drm/amdgpu: refactor amdgpu_device_gpu_recover")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1ab11a82681eb33a66f423216cb063e7f40c6f85)
|
|
[WHAT]
hws was checked for null earlier in dce110_blank_stream, indicating hws
can be null, and should be checked whenever it is used.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 79db43611ff61280b6de58ce1305e0b2ecf675ad)
Cc: stable@vger.kernel.org
|
|
Add a protection to ensure programming are all complete prior VCPU
starting. This is a WA for an unintended VCPU running.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c29521b529fa5e225feaf709d863a636ca0cbbfa)
Cc: stable@vger.kernel.org
|
|
Simplify SDMA v4_4_2 queue reset and stop operations by:
1. Removing GET_INST(SDMA0) conversion for ring->me
2. Using the logical instance ID (ring->me) directly
3. Maintaining consistent behavior with other SDMA queue operations
This change aligns with the existing queue handling logic where
ring->me already represents the correct instance identifier.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3bab282dfe25dff7a55add432f56898505a6cc6c)
Cc: stable@vger.kernel.org
|
|
This commit makes the following improvements to SDMA engine reset handling:
1. Clarifies in the function documentation that instance_id refers to a logical ID
2. Adds conversion from logical to physical instance ID before performing reset
using GET_INST(SDMA0, instance_id) macro
3. Improves error messaging to indicate when a logical instance reset fails
4. Adds better code organization with blank lines for readability
The change ensures proper SDMA engine reset by using the correct physical
instance ID while maintaining the logical ID interface for callers.
V2: Remove harvest_config check and convert directly to physical instance (Lijo)
Suggested-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5efa6217c239ed1ceec0f0414f9b6f6927387dfc)
Cc: stable@vger.kernel.org
|
|
1. Add kicker firmwares loading for gfx11/smu13/psp13
2. Register additional MODULE_FIRMWARE entries for kicker fws
- gc_11_0_0_rlc_kicker.bin
- gc_11_0_0_imu_kicker.bin
- psp_13_0_0_sos_kicker.bin
- psp_13_0_0_ta_kicker.bin
- smu_13_0_0_kicker.bin
Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fb5ec2174d70a8989bc207d257db90ffeca3b163)
Cc: stable@vger.kernel.org
|
|
1. add kicker device list
2. add kicker device checking helper function
Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 09aa2b408f4ab689c3541d22b0968de0392ee406)
Cc: stable@vger.kernel.org
|
|
[WHY]
Userspace currently is offered a range from 0-0xFF but the PWM is
programmed from 0-0xFFFF. This can be limiting to some software
that wants to apply greater granularity.
[HOW]
Convert internally to firmware values only when mapping custom
brightness curves because these are in 0-0xFF range. Advertise full
PWM range to userspace.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8dbd72cb790058ce52279af38a43c2b302fdd3e5)
Cc: stable@vger.kernel.org
|
|
[WHY]
Backlight caps are read already in amdgpu_dm_update_backlight_caps().
They may be updated by update_connector_ext_caps(). Reading again when
registering backlight device may cause wrong values to be used.
[HOW]
Use backlight caps already registered to the dm.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 148144f6d2f14b02eaaa39b86bbe023cbff350bd)
Cc: stable@vger.kernel.org
|
|
[WHY & HOW]
Fix RMCM programming sequence errors and mapping issues to pass the RMCM
test.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 11baa4975025033547f45f5894087a0dda6efbb8)
Cc: stable@vger.kernel.org
|
|
[WHAT]
Severe video playback corruption is observed in the following setup:
weston 14.0.90 (built from source) + mpv v0.40.0 with command:
mpv bbb_sunflower_1080p_60fps_normal.mp4 --vo=gpu
[HOW]
ABGR16161616 needs to be included in dml2/2.1 translation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d023de809f85307ca819a9dbbceee6ae1f50e2ad)
Cc: stable@vger.kernel.org
|
|
[WHY]
For non-zero DSC instances it's possible that the HUBP domain required
to drive it for sequential ONO ASICs isn't met, potentially causing
the logic to the tile to enter an undefined state leading to a system
hang.
[HOW]
Add more checks to ensure that the HUBP domain matching the DSC instance
is appropriately powered.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit da63df07112e5a9857a8d2aaa04255c4206754ec)
Cc: stable@vger.kernel.org
|
|
[WHY]
These fields are read for the explicit purpose of detecting embedded LTTPRs
(i.e. between host ASIC and the user-facing port), and thus need to
calculate the correct DPCD address offset based on LTTPR count to target
the appropriate LTTPR's DPCD register space with these queries.
[HOW]
Cascaded LTTPRs in a link each snoop and increment LTTPR count when queried
via DPCD read, so an LTTPR embedded in a source device (e.g. USB4 port on a
laptop) will always be addressible using the max LTTPR count seen by the
host. Therefore we simply need to use a recently added helper function to
calculate the correct DPCD address to target potentially embedded LTTPRs
based on the received LTTPR count.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 791897f5c77a2a65d0e500be4743af2ddf6eb061)
Cc: stable@vger.kernel.org
|
|
[WHAT]
1. add dc cap for dp tunneling
2. add function to get index of host router
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Cruise Hung <cruise.hung@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 29e178d13979cf6fdb42c5fe2dfec2da2306c4ad)
Cc: stable@vger.kernel.org
|
|
Relocate the per-SDMA queue reset capability check from
kfd_topology_set_capabilities() to node_show() to ensure we read the
latest value of sdma.supported_reset after all IP blocks are initialized.
Fixes: ceb7114c961b ("drm/amdkfd: flag per-sdma queue reset supported to user space")
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e17df7b086cf908cedd919f448da9e00028419bb)
|
|
Adding myself as the contact for Power
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://lore.kernel.org/r/20250614152925.82831-1-maddy@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When setting the funcgraph-args option when function graph tracer is net
enabled, it incorrectly enables it. Worse, it unregisters itself when it
was never registered. Then when it gets enabled again, it will register
itself a second time causing a WARNing.
~# echo 1 > /sys/kernel/tracing/options/funcgraph-args
~# head -20 /sys/kernel/tracing/trace
# tracer: nop
#
# entries-in-buffer/entries-written: 813/26317372 #P:8
#
# _-----=> irqs-off/BH-disabled
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / _-=> migrate-disable
# |||| / delay
# TASK-PID CPU# ||||| TIMESTAMP FUNCTION
# | | | ||||| | |
<idle>-0 [007] d..4. 358.966010: 7) 1.692 us | fetch_next_timer_interrupt(basej=4294981640, basem=357956000000, base_local=0xffff88823c3ae040, base_global=0xffff88823c3af300, tevt=0xffff888100e47cb8);
<idle>-0 [007] d..4. 358.966012: 7) | tmigr_cpu_deactivate(nextexp=357988000000) {
<idle>-0 [007] d..4. 358.966013: 7) | _raw_spin_lock(lock=0xffff88823c3b2320) {
<idle>-0 [007] d..4. 358.966014: 7) 0.981 us | preempt_count_add(val=1);
<idle>-0 [007] d..5. 358.966017: 7) 1.058 us | do_raw_spin_lock(lock=0xffff88823c3b2320);
<idle>-0 [007] d..4. 358.966019: 7) 5.824 us | }
<idle>-0 [007] d..5. 358.966021: 7) | tmigr_inactive_up(group=0xffff888100cb9000, child=0x0, data=0xffff888100e47bc0) {
<idle>-0 [007] d..5. 358.966022: 7) | tmigr_update_events(group=0xffff888100cb9000, child=0x0, data=0xffff888100e47bc0) {
Notice the "tracer: nop" at the top there. The current tracer is the "nop"
tracer, but the content is obviously the function graph tracer.
Enabling function graph tracing will cause it to register again and
trigger a warning in the accounting:
~# echo function_graph > /sys/kernel/tracing/current_tracer
-bash: echo: write error: Device or resource busy
With the dmesg of:
------------[ cut here ]------------
WARNING: CPU: 7 PID: 1095 at kernel/trace/ftrace.c:3509 ftrace_startup_subops+0xc1e/0x1000
Modules linked in: kvm_intel kvm irqbypass
CPU: 7 UID: 0 PID: 1095 Comm: bash Not tainted 6.16.0-rc2-test-00006-gea03de4105d3 #24 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:ftrace_startup_subops+0xc1e/0x1000
Code: 48 b8 22 01 00 00 00 00 ad de 49 89 84 24 88 01 00 00 8b 44 24 08 89 04 24 e9 c3 f7 ff ff c7 04 24 ed ff ff ff e9 b7 f7 ff ff <0f> 0b c7 04 24 f0 ff ff ff e9 a9 f7 ff ff c7 04 24 f4 ff ff ff e9
RSP: 0018:ffff888133cff948 EFLAGS: 00010202
RAX: 0000000000000001 RBX: 1ffff1102679ff31 RCX: 0000000000000000
RDX: 1ffffffff0b27a60 RSI: ffffffff8593d2f0 RDI: ffffffff85941140
RBP: 00000000000c2041 R08: ffffffffffffffff R09: ffffed1020240221
R10: ffff88810120110f R11: ffffed1020240214 R12: ffffffff8593d2f0
R13: ffffffff8593d300 R14: ffffffff85941140 R15: ffffffff85631100
FS: 00007f7ec6f28740(0000) GS:ffff8882b5251000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7ec6f181c0 CR3: 000000012f1d0005 CR4: 0000000000172ef0
Call Trace:
<TASK>
? __pfx_ftrace_startup_subops+0x10/0x10
? find_held_lock+0x2b/0x80
? ftrace_stub_direct_tramp+0x10/0x10
? ftrace_stub_direct_tramp+0x10/0x10
? trace_preempt_on+0xd0/0x110
? __pfx_trace_graph_entry_args+0x10/0x10
register_ftrace_graph+0x4d2/0x1020
? tracing_reset_online_cpus+0x14b/0x1e0
? __pfx_register_ftrace_graph+0x10/0x10
? ring_buffer_record_enable+0x16/0x20
? tracing_reset_online_cpus+0x153/0x1e0
? __pfx_tracing_reset_online_cpus+0x10/0x10
? __pfx_trace_graph_return+0x10/0x10
graph_trace_init+0xfd/0x160
tracing_set_tracer+0x500/0xa80
? __pfx_tracing_set_tracer+0x10/0x10
? lock_release+0x181/0x2d0
? _copy_from_user+0x26/0xa0
tracing_set_trace_write+0x132/0x1e0
? __pfx_tracing_set_trace_write+0x10/0x10
? ftrace_graph_func+0xcc/0x140
? ftrace_stub_direct_tramp+0x10/0x10
? ftrace_stub_direct_tramp+0x10/0x10
? ftrace_stub_direct_tramp+0x10/0x10
vfs_write+0x1d0/0xe90
? __pfx_vfs_write+0x10/0x10
Have the setting of the funcgraph-args check if function_graph tracer is
the current tracer of the instance, and if not, do nothing, as there's
nothing to do (the option is checked when function_graph tracing starts).
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/20250618073801.057ea636@gandalf.local.home
Fixes: c7a60a733c373 ("ftrace: Have funcgraph-args take affect during tracing")
Closes: https://lore.kernel.org/all/4ab1a7bdd0174ab09c7b0d68cdbff9a4@huawei.com/
Reported-by: Changbin Du <changbin.du@huawei.com>
Tested-by: Changbin Du <changbin.du@huawei.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
If allocation of the 'imu' fails, then the existing pages aren't
unpinned in the error path. This is mostly a theoretical issue,
requiring fault injection to hit.
Move unpin_user_pages() to unified error handling to fix the page leak
issue.
Fixes: d8c2237d0aa9 ("io_uring: add io_pin_pages() helper")
Signed-off-by: Penglei Jiang <superman.xpt@gmail.com>
Link: https://lore.kernel.org/r/20250617165644.79165-1-superman.xpt@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Invoke the final function directly in the default finup implementation
since crypto_ahash_final is now just a wrapper around finup.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 9d7a0ab1c753 ("crypto: ahash - Handle partial blocks in API")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Miri Korenblit says:
====================
fixes for 6.16-rc3
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
After the following commit from 2024:
commit e37ab7373696 ("tcp: fix to allow timestamp undo if no retransmits were sent")
...there was buggy behavior where TCP connections without SACK support
could easily see erroneous undo events at the end of fast recovery or
RTO recovery episodes. The erroneous undo events could cause those
connections to suffer repeated loss recovery episodes and high
retransmit rates.
The problem was an interaction between the non-SACK behavior on these
connections and the undo logic. The problem is that, for non-SACK
connections at the end of a loss recovery episode, if snd_una ==
high_seq, then tcp_is_non_sack_preventing_reopen() holds steady in
CA_Recovery or CA_Loss, but clears tp->retrans_stamp to 0. Then upon
the next ACK the "tcp: fix to allow timestamp undo if no retransmits
were sent" logic saw the tp->retrans_stamp at 0 and erroneously
concluded that no data was retransmitted, and erroneously performed an
undo of the cwnd reduction, restoring cwnd immediately to the value it
had before loss recovery. This caused an immediate burst of traffic
and build-up of queues and likely another immediate loss recovery
episode.
This commit fixes tcp_packet_delayed() to ignore zero retrans_stamp
values for non-SACK connections when snd_una is at or above high_seq,
because tcp_is_non_sack_preventing_reopen() clears retrans_stamp in
this case, so it's not a valid signal that we can undo.
Note that the commit named in the Fixes footer restored long-present
behavior from roughly 2005-2019, so apparently this bug was present
for a while during that era, and this was simply not caught.
Fixes: e37ab7373696 ("tcp: fix to allow timestamp undo if no retransmits were sent")
Reported-by: Eric Wheeler <netdev@lists.ewheeler.net>
Closes: https://lore.kernel.org/netdev/64ea9333-e7f9-0df-b0f2-8d566143acab@ewheeler.net/
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Co-developed-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current cmd_ver range checking on cmd_ver < 1 && cmd_ver > 3 can
never be true because the logical operator && is being used, cmd_ver
can never be less than 1 and also greater than 3. Fix this by using
the logical || operator.
Fixes: df6146a0296e ("wifi: iwlwifi: Add a new version for mac config command")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20250522121703.2766764-1-colin.i.king@gmail.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Apparently I accidentally removed this setting in my transport
configuration rework, leading to an endless stream of warnings
from the PCIe code when relevant notifications are received by
the driver from firmware. Restore it.
Reported-by: Woody Suwalski <terraluna977@gmail.com>
Closes: https://lore.kernel.org/r/e8c45d32-6129-8a5e-af80-ccc42aaf200b@gmail.com/
Fixes: 08e77d5edf70 ("wifi: iwlwifi: rework transport configuration")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250616134902.222342908ca4.I47a551c86cbc0e9de4f980ca2fd0d67bf4052e50@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
on arm64 defconfig build failed with gcc-8:
drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info.c:208:3:
include/linux/bitfield.h:195:3: error: call to '__field_overflow'
declared with attribute error: value doesn't fit into mask
__field_overflow(); \
^~~~~~~~~~~~~~~~~~
include/linux/bitfield.h:215:2: note: in expansion of macro '____MAKE_OP'
____MAKE_OP(u##size,u##size,,)
^~~~~~~~~~~
include/linux/bitfield.h:218:1: note: in expansion of macro '__MAKE_OP'
__MAKE_OP(32)
Limit cb_size to valid range to fix it.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://patch.msgid.link/7b373a4426070d50b5afb3269fd116c18ce3aea8.1748332709.git.xiaopei01@kylinos.cn
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
The initialization of async_handlers_list
was accidentally removed in a previous change.
Then it was restoted by commit 175e69e33c66 ("wifi: iwlwifi: restore
missing initialization of async_handlers_list").
Somehow, the initialization disappeared again.
Restote it.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git updates for v6.16-rc3
Fix the following 3 issues:
wifi: ath12k: avoid burning CPU while waiting for firmware stats
wifi: ath12k: don't activate more links than firmware supports
wifi: carl9170: do not ping device which has failed to load firmware
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If the firmware gives bad input, that's nothing to do with
the driver's stack at this point etc., so the WARN_ON()
doesn't add any value. Additionally, this is one of the
top syzbot reports now. Just print a message, and as an
added bonus, print the sizes too.
Reported-by: syzbot+92c6dd14aaa230be6855@syzkaller.appspotmail.com
Tested-by: syzbot+92c6dd14aaa230be6855@syzkaller.appspotmail.com
Acked-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Link: https://patch.msgid.link/20250617114529.031a677a348e.I58bf1eb4ac16a82c546725ff010f3f0d2b0cca49@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Kuniyuki Iwashima says:
====================
atm: Fix uninit and mem accounting leak in vcc_sendmsg().
Patch 1 fixes uninit issue reported by KMSAN, and patch 2 fixes
another issue found by Simon Horman during review for v1 patch.
v1: https://lore.kernel.org/20250613055700.415596-1-kuni1840@gmail.com
====================
Link: https://patch.msgid.link/20250616182147.963333-1-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In vcc_sendmsg(), we account skb->truesize to sk->sk_wmem_alloc by
atm_account_tx().
It is expected to be reverted by atm_pop_raw() later called by
vcc->dev->ops->send(vcc, skb).
However, vcc_sendmsg() misses the same revert when copy_from_iter_full()
fails, and then we will leak a socket.
Let's factorise the revert part as atm_return_tx() and call it in
the failure path.
Note that the corresponding sk_wmem_alloc operation can be found in
alloc_tx() as of the blamed commit.
$ git blame -L:alloc_tx net/atm/common.c c55fa3cccbc2c~
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/netdev/20250614161959.GR414686@horms.kernel.org/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250616182147.963333-3-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported the splat below. [0]
vcc_sendmsg() copies data passed from userspace to skb and passes
it to vcc->dev->ops->send().
atmtcp_c_send() accesses skb->data as struct atmtcp_hdr after
checking if skb->len is 0, but it's not enough.
Also, when skb->len == 0, skb and sk (vcc) were leaked because
dev_kfree_skb() is not called and sk_wmem_alloc adjustment is missing
to revert atm_account_tx() in vcc_sendmsg(), which is expected
to be done in atm_pop_raw().
Let's properly free skb with an invalid length in atmtcp_c_send().
[0]:
BUG: KMSAN: uninit-value in atmtcp_c_send+0x255/0xed0 drivers/atm/atmtcp.c:294
atmtcp_c_send+0x255/0xed0 drivers/atm/atmtcp.c:294
vcc_sendmsg+0xd7c/0xff0 net/atm/common.c:644
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg+0x330/0x3d0 net/socket.c:727
____sys_sendmsg+0x7e0/0xd80 net/socket.c:2566
___sys_sendmsg+0x271/0x3b0 net/socket.c:2620
__sys_sendmsg net/socket.c:2652 [inline]
__do_sys_sendmsg net/socket.c:2657 [inline]
__se_sys_sendmsg net/socket.c:2655 [inline]
__x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2655
x64_sys_call+0x32fb/0x3db0 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4154 [inline]
slab_alloc_node mm/slub.c:4197 [inline]
kmem_cache_alloc_node_noprof+0x818/0xf00 mm/slub.c:4249
kmalloc_reserve+0x13c/0x4b0 net/core/skbuff.c:579
__alloc_skb+0x347/0x7d0 net/core/skbuff.c:670
alloc_skb include/linux/skbuff.h:1336 [inline]
vcc_sendmsg+0xb40/0xff0 net/atm/common.c:628
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg+0x330/0x3d0 net/socket.c:727
____sys_sendmsg+0x7e0/0xd80 net/socket.c:2566
___sys_sendmsg+0x271/0x3b0 net/socket.c:2620
__sys_sendmsg net/socket.c:2652 [inline]
__do_sys_sendmsg net/socket.c:2657 [inline]
__se_sys_sendmsg net/socket.c:2655 [inline]
__x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2655
x64_sys_call+0x32fb/0x3db0 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
CPU: 1 UID: 0 PID: 5798 Comm: syz-executor192 Not tainted 6.16.0-rc1-syzkaller-00010-g2c4a1f3fe03e #0 PREEMPT(undef)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+1d3c235276f62963e93a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1d3c235276f62963e93a
Tested-by: syzbot+1d3c235276f62963e93a@syzkaller.appspotmail.com
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250616182147.963333-2-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
Fixes for v6.16-rc3
Display:
- Fixed DP output on SDM845
- Fixed 10nm DSI PLL init
GPU:
- SUBMIT ioctl error path leak fixes
- drm half of stall-on-fault fixes. Note there is a soft dependency,
to get correct mmu fault devcoredumps, on arm-smmu changes which
are not in this branch, but have already been merged by Linus. So
by the time Linus merges this, everything should be peachy.
- a7xx: Missing CP_RESET_CONTEXT_STATE
- Skip GPU component bind if GPU is not in the device table.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <rob.clark@oss.qualcomm.com>
Link: https://lore.kernel.org/r/CACSVV03=OH74ip8O1xqb8RJWGyM4HFuUnWuR=p3zJR+-ko_AJA@mail.gmail.com
|
|
As syzbot reported [0], mpls_route_input_rcu() can be called
from mpls_getroute(), where is under RTNL.
net->mpls.platform_label is only updated under RTNL.
Let's use rcu_dereference_rtnl() in mpls_route_input_rcu() to
silence the splat.
[0]:
WARNING: suspicious RCU usage
6.15.0-rc7-syzkaller-00082-g5cdb2c77c4c3 #0 Not tainted
----------------------------
net/mpls/af_mpls.c:84 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by syz.2.4451/17730:
#0: ffffffff9012a3e8 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock net/core/rtnetlink.c:80 [inline]
#0: ffffffff9012a3e8 (rtnl_mutex){+.+.}-{4:4}, at: rtnetlink_rcv_msg+0x371/0xe90 net/core/rtnetlink.c:6961
stack backtrace:
CPU: 1 UID: 0 PID: 17730 Comm: syz.2.4451 Not tainted 6.15.0-rc7-syzkaller-00082-g5cdb2c77c4c3 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120
lockdep_rcu_suspicious+0x166/0x260 kernel/locking/lockdep.c:6865
mpls_route_input_rcu+0x1d4/0x200 net/mpls/af_mpls.c:84
mpls_getroute+0x621/0x1ea0 net/mpls/af_mpls.c:2381
rtnetlink_rcv_msg+0x3c9/0xe90 net/core/rtnetlink.c:6964
netlink_rcv_skb+0x16d/0x440 net/netlink/af_netlink.c:2534
netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
netlink_unicast+0x53a/0x7f0 net/netlink/af_netlink.c:1339
netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg net/socket.c:727 [inline]
____sys_sendmsg+0xa98/0xc70 net/socket.c:2566
___sys_sendmsg+0x134/0x1d0 net/socket.c:2620
__sys_sendmmsg+0x200/0x420 net/socket.c:2709
__do_sys_sendmmsg net/socket.c:2736 [inline]
__se_sys_sendmmsg net/socket.c:2733 [inline]
__x64_sys_sendmmsg+0x9c/0x100 net/socket.c:2733
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x230 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f0a2818e969
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f0a28f52038 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 00007f0a283b5fa0 RCX: 00007f0a2818e969
RDX: 0000000000000003 RSI: 0000200000000080 RDI: 0000000000000003
RBP: 00007f0a28210ab1 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007f0a283b5fa0 R15: 00007ffce5e9f268
</TASK>
Fixes: 0189197f4416 ("mpls: Basic routing support")
Reported-by: syzbot+8a583bdd1a5cc0b0e068@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68507981.a70a0220.395abc.01ef.GAE@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250616201532.1036568-1-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzkaller reports [1, 2] crashes caused by an attempts to ping
the device which has failed to load firmware. Since such a device
doesn't pass 'ieee80211_register_hw()', an internal workqueue
managed by 'ieee80211_queue_work()' is not yet created and an
attempt to queue work on it causes null-ptr-deref.
[1] https://syzkaller.appspot.com/bug?extid=9a4aec827829942045ff
[2] https://syzkaller.appspot.com/bug?extid=0d8afba53e8fb2633217
Fixes: e4a668c59080 ("carl9170: fix spurious restart due to high latency")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Link: https://patch.msgid.link/20250616181205.38883-1-dmantipov@yandex.ru
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
For WMI_REQUEST_VDEV_STAT request, firmware might split response into
multiple events dut to buffer limit, hence currently in
ath12k_wmi_fw_stats_process() host waits until all events received. In
case there is no vdev started, this results in that below condition
would never get satisfied
((++ar->fw_stats.num_vdev_recvd) == total_vdevs_started)
consequently the requestor would be blocked until time out.
The same applies to WMI_REQUEST_BCN_STAT request as well due to:
((++ar->fw_stats.num_bcn_recvd) == ar->num_started_vdevs)
Change to check the number of started vdev first: if it is zero, finish
directly; if not, follow the old way.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Fixes: e367c924768b ("wifi: ath12k: Request vdev stats from firmware")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250612-ath12k-fw-fixes-v1-4-12f594f3b857@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently ath12k_wmi_fw_stats_process() is using static variables to count
firmware stat events. Taking num_vdev as an example, if for whatever
reason (say ar->num_started_vdevs is 0 or firmware bug etc.) the following
condition
(++num_vdev) == total_vdevs_started
is not met, is_end is not set thus num_vdev won't be cleared. Next time
when firmware stats is requested again, even if everything is working
fine, failure is expected due to the condition above will never be
satisfied.
The same applies to num_bcn as well.
Change to use non-static counters and reset them each time before firmware
stats is requested.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Fixes: e367c924768b ("wifi: ath12k: Request vdev stats from firmware")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250612-ath12k-fw-fixes-v1-3-12f594f3b857@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
ath12k_mac_get_fw_stats() is busy polling fw_stats_done flag while waiting
firmware finishing sending all events. This is not good as CPU is
monopolized and kept burning during the wait.
Change to the completion mechanism to fix it.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Fixes: e367c924768b ("wifi: ath12k: Request vdev stats from firmware")
Reported-by: Grégoire Stein <gregoire.s93@live.fr>
Closes: https://lore.kernel.org/ath12k/AS8P190MB120575BBB25FCE697CD7D4988763A@AS8P190MB1205.EURP190.PROD.OUTLOOK.COM/
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Tested-by: Grégoire Stein <gregoire.s93@live.fr>
Link: https://patch.msgid.link/20250612-ath12k-fw-fixes-v1-2-12f594f3b857@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Regarding the firmware stats events handling, the comment in
ath12k_mac_get_fw_stats() says host determines whether all events have been
received based on 'end' tag in TLV. This is wrong as there is no such tag
at all, actually host makes the decision totally by itself based on the
stats type and active pdev/vdev counts etc.
Fix it to correctly reflect the logic.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250612-ath12k-fw-fixes-v1-1-12f594f3b857@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
In case of ML connection, currently all useful links are activated at
ASSOC stage:
ieee80211_set_active_links(vif, ieee80211_vif_usable_links(vif))
this results in firmware crash when the number of links activated on the
same device is more than supported.
Since firmware supports activating at most 2 links for a ML connection,
to avoid firmware crash, host needs to select 2 links out of the useful
links. As the assoc link has already been chosen, the question becomes
how to determine partner links. A straightforward principle applied
here is that the resulted combination should achieve the best throughput.
For that purpose, ideally various factors like bandwidth, RSSI etc should
be considered. But that would be too complicate. To make it easy, the
choice is to only take hardware modes into consideration.
The SBS (single band simultaneously) mode frequency range covers 5 GHz
and 6 GHz bands. In this mode, the two individual MACs are both active,
with one working on 5g-high band and the other on 5g-low band (from
hardware perspective 5 GHz and 6 GHz bands are referred to as a 'large'
single 5 GHz band). The DBS (dual band simultaneously) mode covers 2 GHz
band and the 'large' 5 GHz band, with one MAC working on 2 GHz band and
the other working on 5 GHz band or 6 GHz band. Since 5,6 GHz bands could
provide higher bandwidth than 2 GHz band, the preference is given to SBS
mode. Other hardware modes results in only one working MAC at any given
time, so it is chosen only when both SBS are DBS are not possible.
For each hardware mode, if there are more than one partner candidate,
just choose the first one.
For now only single device MLO case is handled as it is easy. Other cases
could be addressed in the future.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250522-ath12k-sbs-dbs-v1-6-54a29e7a3a88@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
In case of two links established on the same device in an ML connection,
depending on device's hardware mode capability, it is possible that both
links fall on the same MAC. Currently, no specific action is taken to
address this but just keep both links active. However this would result
in lower throughput compared to even one link, because switching between
these two links on the resulted MAC significantly impacts throughput.
Check if both links fall in the frequency range of a single MAC. If
so, send WMI_MLO_LINK_SET_ACTIVE_CMDID command to firmware such that
firmware can deactivate one of them. Note the decision of which link
getting deactivated is made by firmware, host only sends the vdev
lists.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250522-ath12k-sbs-dbs-v1-5-54a29e7a3a88@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Add WMI_MLO_LINK_SET_ACTIVE_CMDID command. This command allows host to
send required link information to firmware such that firmware can make
decision on activating/deactivating links in various scenarios.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250522-ath12k-sbs-dbs-v1-4-54a29e7a3a88@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Previous patches parse and save hardware MAC frequency range information
in ath12k_svc_ext_info structure. Such range represents hardware
capability hence needs to be updated based on host information, e.g. guard
the range based on host's low/high boundary.
So update frequency range. The updated range is saved in
ath12k_hw_mode_info structure and would be used when doing vdev activation
and link selection in following patches.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250522-ath12k-sbs-dbs-v1-3-54a29e7a3a88@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
WMI_SERVICE_READY_EXT2_EVENTID event
Firmware sends the boundary between lower and higher bands in
ath12k_wmi_dbs_or_sbs_cap_params structure embedded in
WMI_SERVICE_READY_EXT2_EVENTID event. The boundary is needed when
updating frequency range in the following patch. So parse and save
it for later use. Note ath12k_wmi_dbs_or_sbs_cap_params is placed
after some other structures, so placeholders for them are added
as well.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250522-ath12k-sbs-dbs-v1-2-54a29e7a3a88@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
WMI_SERVICE_READY_EXT_EVENTID event for later use
WLAN hardware might support various hardware modes such as DBS (dual
band simultaneously), SBS (single band simultaneously) and DBS_OR_SBS
etc, see enum wmi_host_hw_mode_config_type. Firmware advertises actual
supported modes in WMI_SERVICE_READY_EXT_EVENTID event. For each mode,
firmware advertises frequency range each hardware MAC can operate on.
In MLO case such information is necessary during vdev activation and
link selection (which is done in following patches), so add a new
structure ath12k_svc_ext_info to ath12k_wmi_base, then parse and save
those information to it for later use.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250522-ath12k-sbs-dbs-v1-1-54a29e7a3a88@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
When the ath12k driver is built without CONFIG_ATH12K_DEBUG, the
recently refactored stats code can cause any user space application
(such at NetworkManager) to consume 100% CPU for 3 seconds, every time
stats are read.
Commit 'b8a0d83fe4c7 ("wifi: ath12k: move firmware stats out of
debugfs")' moved ath12k_debugfs_fw_stats_request() out of debugfs, by
merging the additional logic into ath12k_mac_get_fw_stats().
Among the added responsibility of ath12k_mac_get_fw_stats() was the
busy-wait for `fw_stats_done`.
Signalling of `fw_stats_done` happens when one of the
WMI_REQUEST_PDEV_STAT, WMI_REQUEST_VDEV_STAT, and WMI_REQUEST_BCN_STAT
messages are received, but the handling of the latter two commands remained
in the debugfs code. As `fw_stats_done` isn't signalled, the calling
processes will spin until the timeout (3 seconds) is reached.
Moving the handling of these two additional responses out of debugfs
resolves the issue.
Fixes: b8a0d83fe4c7 ("wifi: ath12k: move firmware stats out of debugfs")
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Tested-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://patch.msgid.link/20250609-ath12k-fw-stats-done-v1-1-2b3624656697@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
