summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-11-27drm/msm: switch to atomic-helpers iterator macrosRob Clark
Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-27drm/atomic: add plane iterator macrosRob Clark
Add helper macros to iterate the current, or incoming set of planes attached to a crtc. These helpers are only available for drivers converted to use atomic-helpers. Signed-off-by: Rob Clark <robdclark@gmail.com> [danvet: Squash in fixup from Rob to move the planemask iterator to drm_crtc.h and document it. That one is needed by the atomic ioctl so can't be in a helper library.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-27drm/atomic: track bitmask of planes attached to crtcRob Clark
Chasing plane->state->crtc of planes that are *not* part of the same atomic update is racy, making it incredibly awkward (or impossible) to do something simple like iterate over all planes and figure out which ones are attached to a crtc. Solve this by adding a bitmask of currently attached planes in the crtc-state. Note that the transitional helpers do not maintain the plane_mask. But they only support the legacy ioctls, which have sufficient brute-force locking around plane updates that they can continue to loop over all planes to see what is attached to a crtc the old way. Signed-off-by: Rob Clark <robdclark@gmail.com> [danvet: - Drop comments about locking in set_crtc_for_plane since they're a bit misleading - we already should hold lock for the current crtc. - Also WARN_ON if get_state on the old crtc fails since that should have been done already. - Squash in fixup to check get_plane_state return value, reported by Dan Carpenter and acked by Rob Clark.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-27Merge tag 'mvebu-fixes-3.18-2' of git://git.infradead.org/linux-mvebu into fixesArnd Bergmann
Pull "mvebu fixes for v3.18 (round 2)" frm Jason Cooper: - mvebu - coherency.c needed an of_node_put() * tag 'mvebu-fixes-3.18-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: add missing of_node_put() call in coherency.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-27Merge tag 'samsung-defconfig-v3.18' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Pull "Samsung defconfig update for v3.18" from Kukjin Kim: - enable max77802 rtc and clock drivers for exynos_defconfig : enable the kernel config options to have the drivers for max77802 including rtc and 2-ch 32kHz clock outputs * tag 'samsung-defconfig-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: exynos_defconfig: Enable max77802 rtc and clock drivers Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-27Merge tag 'samsung-fixes-v3.18' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Pull "Samsung fixes for v3.18" from Kukjin Kim: - explicitly set dr_mode on exynos5250-snow this is required when kernel is built with USB gadget support. * tag 'samsung-fixes-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Explicitly set dr_mode on exynos5250-snow Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-27ARM: tegra: irq: fix buggy usage of irq_data irq fieldMarc Zyngier
The crazy gic_arch_extn thing that Tegra uses contains multiple references to the irq field in struct irq_data, and uses this to directly poke hardware register. But irq is the *virtual* irq number, something that has nothing to do with the actual HW irq (stored in the hwirq field). And once we put the stacked domain code in action, the whole thing explodes, as these two values are *very* different: root@bacon-fat:~# cat /proc/interrupts CPU0 CPU1 16: 25801 2075 GIC 29 twd 17: 0 0 GIC 73 timer0 112: 0 0 GPIO 58 c8000600.sdhci cd 123: 0 0 GPIO 69 c8000200.sdhci cd 279: 1126 0 GIC 122 serial 281: 0 0 GIC 70 7000c000.i2c 282: 0 0 GIC 116 7000c400.i2c 283: 0 0 GIC 124 7000c500.i2c 284: 300 0 GIC 85 7000d000.i2c [...] Just replacing all instances of irq with hwirq fixes the issue. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-27Merge branch 'drm-fixes-3.18' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes one fix for PX laptops. * 'drm-fixes-3.18' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: report disconnected for LVDS/eDP with PX if ddc fails
2014-11-26drm/radeon: report disconnected for LVDS/eDP with PX if ddc failsAlex Deucher
If ddc fails, presumably the i2c mux (and hopefully the signal mux) are switched to the other GPU so don't fetch the edid from the vbios so that the connector reports disconnected. bug: https://bugzilla.opensuse.org/show_bug.cgi?id=904417 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-11-27powerpc: 32 bit getcpu VDSO function uses 64 bit instructionsAnton Blanchard
I used some 64 bit instructions when adding the 32 bit getcpu VDSO function. Fix it. Fixes: 18ad51dd342a ("powerpc: Add VDSO version of getcpu") Cc: stable@vger.kernel.org Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-27powerpc/powernv: Replace OPAL_DEASSERT_RESET with EEH_RESET_DEACTIVATEGavin Shan
The flag passed to ioda_eeh_phb_reset() should be EEH_RESET_DEACTIVATE, which is translated to OPAL_DEASSERT_RESET or something else by the EEH backend accordingly. The patch replaces OPAL_DEASSERT_RESET with EEH_RESET_DEACTIVATE for ioda_eeh_phb_reset(). Cc: stable@vger.kernel.org Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-27Merge branch 'drm/du/adv7511' of git://linuxtv.org/pinchartl/fbdev into drm-nextDave Airlie
The branch is based on a merge of drm-next and Simon's tags/renesas-dt-du-for- v3.19 available at git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git, the latter having been pulled in the ARM SoC tree for v3.19. Compared to v1, I've rebased my branch on a later drm-next, added Julia's error return code fix, and documented the "drm: Decouple EDID parsing from I2C adapter" patch properly. v1: Here's a pull request that adds HDMI support to the R-Car DU driver, including a new slave encoder driver for the adv7511. * 'drm/du/adv7511' of git://linuxtv.org/pinchartl/fbdev: drm: Add adv7511 encoder driver video: Add ADV751[13] DT bindings documentation drm: Decouple EDID parsing from I2C adapter drm: rcar-du: Add HDMI encoder and connector support drm: rcar-du: Replace drm_encoder with drm_slave_encoder drm: rcar-du: Replace direct DRM encoder access with cast macro drm: rcar-du: Pass the encoder DT node to rcar_du_encoder_init() drm: rcar-du: Remove platform data support drm: rcar-du: fix error return code ARM: shmobile: koelsch: Enable DU device in DT ARM: shmobile: koelsch-reference: Remove DU platform device ARM: shmobile: lager: Enable DU device in DT ARM: shmobile: lager-reference: Remove DU platform device ARM: shmobile: marzen: Enable DU device in DT ARM: shmobile: dts: Add common file for AA104XD12 panel ARM: shmobile: r8a7791: Add DU node to device tree ARM: shmobile: r8a7790: Add DU node to device tree ARM: shmobile: r8a7779: Add DU node to device tree ARM: shmobile: Remove FSF address from copyright headers
2014-11-27powerpc/eeh: Fix PE state formatGavin Shan
Obviously I had wrong format given to the PE state output from /sys/bus/pci/devices/xxxx/eeh_pe_state with some typoes, which was introduced by commit 2013add4ce73. The patch fixes it up. Fixes: 2013add4ce73 ("powerpc/eeh: Show hex prefix for PE state sysfs") Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-27powerpc/pseries: Fix endiannes issue in RTAS call from xmonLaurent Dufour
On pseries system (LPAR) xmon failed to enter when running in LE mode, system is hunging. Inititating xmon will lead to such an output on the console: SysRq : Entering xmon cpu 0x15: Vector: 0 at [c0000003f39ffb10] pc: c00000000007ed7c: sysrq_handle_xmon+0x5c/0x70 lr: c00000000007ed7c: sysrq_handle_xmon+0x5c/0x70 sp: c0000003f39ffc70 msr: 8000000000009033 current = 0xc0000003fafa7180 paca = 0xc000000007d75e80 softe: 0 irq_happened: 0x01 pid = 14617, comm = bash Bad kernel stack pointer fafb4b0 at eca7cc4 cpu 0x15: Vector: 300 (Data Access) at [c000000007f07d40] pc: 000000000eca7cc4 lr: 000000000eca7c44 sp: fafb4b0 msr: 8000000000001000 dar: 10000000 dsisr: 42000000 current = 0xc0000003fafa7180 paca = 0xc000000007d75e80 softe: 0 irq_happened: 0x01 pid = 14617, comm = bash cpu 0x15: Exception 300 (Data Access) in xmon, returning to main loop xmon: WARNING: bad recursive fault on cpu 0x15 The root cause is that xmon is calling RTAS to turn off the surveillance when entering xmon, and RTAS is requiring big endian parameters. This patch is byte swapping the RTAS arguments when running in LE mode. Cc: stable@vger.kernel.org Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-27powerpc/powernv: Fix the hmi event version check.Mahesh Salgaonkar
The current HMI event structure is an ABI and carries a version field to accommodate future changes without affecting/rearranging current structure members that are valid for previous versions. The current version check "if (hmi_evt->version != OpalHMIEvt_V1)" doesn't accomodate the fact that the version number may change in future. If firmware starts returning an HMI event with version > 1, this check will fail and no HMI information will be printed on older kernels. This patch fixes this issue. Cc: stable@vger.kernel.org # 3.17+ Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> [mpe: Reword changelog] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-27Merge branch 'amdkfd-next-3.19' of ↵Dave Airlie
git://people.freedesktop.org/~gabbayo/linux into drm-next - Fixes for sparse warnings - Memory leak fixes - Fix for deadlock between amdkfd and iommu * 'amdkfd-next-3.19' of git://people.freedesktop.org/~gabbayo/linux: amdkfd: delete some dead code amdkfd: Fix memory leak of mqds on dqm fini amdkfd: fix an error handling bug in pqm_create_queue() amdkfd: fix some error handling in ioctl amdkfd: Remove DRM_AMDGPU dependency from Kconfig amdkfd: explicitely include io.h in kfd_doorbell.c amdkfd: Clear ctx cb before suspend amdkfd: Instead of using get function, use container_of amdkfd: use schedule() in sync_with_hw amdkfd: Fix memory leak on process deregistration amdkfd: add __iomem attribute to doorbell_ptr amdkfd: fence_wait_timeout() can be static amdkfd: is_occupied() can be static amdkfd: Fix sparse warnings in kfd_flat_memory.c amdkfd: pqm_get_kernel_queue() can be static amdkfd: test_kq() can be static amdkfd: Fix sparse warnings in kfd_topology.c amdkfd: Fix sparse warnings in kfd_chardev.c
2014-11-26staging: r8188eu: Fix scheduling while atomic error introduced in commit ↵Larry Finger
fadbe0cd In commit fadbe0cd5292851608e2e01b91d9295fa287b9fe entitled "staging: rtl8188eu:Remove rtw_zmalloc(), wrapper for kzalloc()", the author failed to note that the original code in the wrapper tested whether the caller could sleep, and set the flags argument to kzalloc() appropriately. After the patch, GFP_KERNEL is used unconditionally. Unfortunately, several of the routines may be entered from an interrupt routine and generate a BUG splat for every such call. Routine rtw_sitesurvey_cmd() is used in the example below: BUG: sleeping function called from invalid context at mm/slub.c:1240 in_atomic(): 1, irqs_disabled(): 0, pid: 756, name: wpa_supplicant INFO: lockdep is turned off. CPU: 2 PID: 756 Comm: wpa_supplicant Tainted: G WC O 3.18.0-rc4+ #34 Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.20 04/17/2014 ffffc90005557000 ffff880216fafaa8 ffffffff816b0bbf 0000000000000000 ffff8800c3b58000 ffff880216fafac8 ffffffff8107af77 0000000000000001 0000000000000010 ffff880216fafb18 ffffffff811b06ce 0000000000000000 Call Trace: [<ffffffff816b0bbf>] dump_stack+0x4e/0x71 [<ffffffff8107af77>] __might_sleep+0xf7/0x120 [<ffffffff811b06ce>] kmem_cache_alloc_trace+0x4e/0x1f0 [<ffffffffa0888226>] ? rtw_sitesurvey_cmd+0x56/0x2a0 [r8188eu] [<ffffffffa0888226>] rtw_sitesurvey_cmd+0x56/0x2a0 [r8188eu] [<ffffffffa088f00d>] rtw_do_join+0x22d/0x370 [r8188eu] [<ffffffffa088f6e8>] rtw_set_802_11_ssid+0x218/0x3d0 [r8188eu] [<ffffffffa08c3ca5>] rtw_wx_set_essid+0x1e5/0x410 [r8188eu] [<ffffffffa08c3ac0>] ? rtw_wx_get_rate+0x50/0x50 [r8188eu] [<ffffffff816938f1>] ioctl_standard_iw_point+0x151/0x3f0 [<ffffffff81693d52>] ioctl_standard_call+0xb2/0xe0 [<ffffffff81597df7>] ? rtnl_lock+0x17/0x20 [<ffffffff816945a0>] ? iw_handler_get_private+0x70/0x70 [<ffffffff81693ca0>] ? call_commit_handler+0x40/0x40 [<ffffffff81693256>] wireless_process_ioctl+0x176/0x1c0 [<ffffffff81693e79>] wext_handle_ioctl+0x69/0xc0 [<ffffffff8159fe79>] dev_ioctl+0x309/0x5e0 [<ffffffff810be9c7>] ? call_rcu+0x17/0x20 [<ffffffff8156a472>] sock_ioctl+0x142/0x2e0 [<ffffffff811e0c70>] do_vfs_ioctl+0x300/0x520 [<ffffffff81101514>] ? __audit_syscall_entry+0xb4/0x110 [<ffffffff81101514>] ? __audit_syscall_entry+0xb4/0x110 [<ffffffff810102bc>] ? do_audit_syscall_entry+0x6c/0x70 [<ffffffff811e0f11>] SyS_ioctl+0x81/0xa0 [<ffffffff816ba1d2>] system_call_fastpath+0x12/0x17 Additional routines that generate this BUG are rtw_joinbss_cmd(), rtw_dynamic_chk_wk_cmd(), rtw_lps_ctrl_wk_cmd(), rtw_rpt_timer_cfg_cmd(), rtw_ps_cmd(), report_survey_event(), report_join_res(), survey_timer_hdl(), and rtw_check_bcn_info(). Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: navin patidar <navin.patidar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26Merge tag 'master-2014-11-25' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== pull request: wireless 2014-11-26 Please pull this little batch of fixes intended for the 3.18 stream... For the iwlwifi one, Emmanuel says: "Not all the firmware know how to handle the HOT_SPOT_CMD. Make sure that the firmware will know this command before sending it. This avoids a firmware crash." Along with that, Larry sends a pair of rtlwifi fixes to address some discrepancies from moving drivers out of staging. Larry says: "These two patches are needed to fix a regression introduced when driver rtl8821ae was moved from staging to the regular wireless tree." Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26sparc: Add NOP dma_cache_sync() implementation.David S. Miller
This can be a NOP because we forward dma_{alloc,free}_noncoherent to dma_{alloc,free}_coherent. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26net-timestamp: make tcp_recvmsg call ipv6_recv_error for AF_INET6 socksWillem de Bruijn
TCP timestamping introduced MSG_ERRQUEUE handling for TCP sockets. If the socket is of family AF_INET6, call ipv6_recv_error instead of ip_recv_error. This change is more complex than a single branch due to the loadable ipv6 module. It reuses a pre-existing indirect function call from ping. The ping code is safe to call, because it is part of the core ipv6 module and always present when AF_INET6 sockets are active. Fixes: 4ed2d765 (net-timestamp: TCP timestamping) Signed-off-by: Willem de Bruijn <willemb@google.com> ---- It may also be worthwhile to add WARN_ON_ONCE(sk->family == AF_INET6) to ip_recv_error. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26Merge branch 'bridge_nl_validation'David S. Miller
Thomas Graf says: ==================== bridge: Fix missing Netlink message validations Adds various missing length checks in the bridging code for Netlink messages and corresponding attributes provided by user space. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26bridge: Sanitize IFLA_EXT_MASK for AF_BRIDGE:RTM_GETLINKThomas Graf
Only search for IFLA_EXT_MASK if the message actually carries a ifinfomsg header and validate minimal length requirements for IFLA_EXT_MASK. Fixes: 6cbdceeb ("bridge: Dump vlan information from a bridge port") Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26bridge: Add missing policy entry for IFLA_BRPORT_FAST_LEAVEThomas Graf
Fixes: c2d3babf ("bridge: implement multicast fast leave") Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26net: Check for presence of IFLA_AF_SPECThomas Graf
ndo_bridge_setlink() is currently only called on the slave if IFLA_AF_SPEC is set but this is a very fragile assumption and may change in the future. Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26net: Validate IFLA_BRIDGE_MODE attribute lengthThomas Graf
Payload is currently accessed blindly and may exceed valid message boundaries. Fixes: a77dcb8c8 ("be2net: set and query VEB/VEPA mode of the PF interface") Fixes: 815cccbf1 ("ixgbe: add setlink, getlink support to ixgbe and ixgbevf") Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26bridge: Validate IFLA_BRIDGE_FLAGS attribute lengthThomas Graf
Payload is currently accessed blindly and may exceed valid message boundaries. Fixes: 407af3299 ("bridge: Add netlink interface to configure vlans on bridge ports") Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "Last minute KVM/ARM fixes; even the generic change actually affects nothing but ARM" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: fix kvm_is_mmio_pfn() and rename to kvm_is_reserved_pfn() arm/arm64: kvm: drop inappropriate use of kvm_is_mmio_pfn() arm/arm64: KVM: vgic: Fix error code in kvm_vgic_create() arm64: KVM: Handle traps of ICC_SRE_EL1 as RAZ/WI arm64: KVM: fix unmapping with 48-bit VAs
2014-11-26Merge tag 'iio-fixes-for-3.18c' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: Third set of IIO fixes for the 3.18 cycle. Most of these are fairly standard little fixes, a bmc150 and bmg160 patch is to make an ABI change to indicated a specific axis in an event rather than the generic option in the original drivers. As both of these drivers are new in this cycle it would be ideal to push this minor change through even though it isn't strictly a fix. A couple of other 'fixes' change defaults for some settings on these new drivers to more intuitive calues. Looks like some useful feedback has been coming in for this driver since it was applied. * IIO_EVENT_CODE_EXTRACT_DIR bit mask was wrong and has been for a while 0xCF clearly doesn't give a contiguous bitmask. * kxcjk-1013 range setting was failing to mask out the previous value in the register and hence was 'enable only'. * men_z188 device id table wasn't null terminated. * bmg160 and bmc150 both failed to correctly handling an error in mode setting. * bmg160 and bmc150 both had a bug in setting the event direction in the event spec (leads to an attribute name being incorrect) * bmg160 defaulted to an open drain output for the interrupt - as a default this obviously only works with some interrupt chips - hence change the default to push-pull (note this is a new driver so we aren't going to cause any regressions with this change). * bmc150 had an unintuitive default for the rate of change (motion detector) so change it to 0 (new driver so change of default won't cause any regressions).
2014-11-26Merge remote-tracking branches 'spi/fix/dw' and 'spi/fix/sirf' into spi-linusMark Brown
2014-11-26Merge remote-tracking branch 'spi/fix/dma' into spi-linusMark Brown
2014-11-26drm: Add adv7511 encoder driverLars-Peter Clausen
This patch adds a driver for the Analog Devices adv7511. The adv7511 is a standalone HDMI transmitter chip. It features a HDMI output interface on one end and video and audio input interfaces on the other. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-11-26video: Add ADV751[13] DT bindings documentationLaurent Pinchart
The ADV7511, ADV7511W and ADV7513 are HDMI audio and video transmitters compatible with HDMI 1.4 and DVI 1.0. They're described in DT using the OF graph bindings and a list of custom properties pertaining to the input video bus configuration. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-11-26drm: Decouple EDID parsing from I2C adapterLars-Peter Clausen
The drm_get_edid() function performs direct I2C accesses to read EDID blocks, assuming that the monitor DDC interface is directly connected to the I2C bus. It can't thus be used with HDMI encoders that control the DDC bus and expose EDID blocks through a different interface. Refactor drm_do_get_edid() to take a block read callback function instead of an I2C adapter, and export it for direct use by drivers. As in the general case the DDC bus is accessible by the kernel at the I2C level, drivers must make all reasonable efforts to expose it as an I2C adapter and use drm_get_edid() instead of abusing this function. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-26drm: rcar-du: Add HDMI encoder and connector supportLaurent Pinchart
SoCs that integrate the DU have no internal HDMI encoder, support external encoders only. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-11-26drm: rcar-du: Replace drm_encoder with drm_slave_encoderLaurent Pinchart
DRM slave encoders require their associated struct drm_encoder instance to be embedded in a struct drm_slave_encoder. This makes processing encoders regardless of their types needlessly and painfully complex in drivers that use a mix of slave encoders and custom encoders. Such a driver will need to either create drm_slave_encoder instances that fake their embedded encoder instance, or to turn all drm_encoder instances into drm_slave_encoder instances. Between the two evils, one must choose the lesser. Use drm_slave_encoder everywhere. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-11-26drm: rcar-du: Replace direct DRM encoder access with cast macroLaurent Pinchart
Add a new macro to downcast an rcar_du_encoder pointer to a drm_encoder pointer and use it. This prepares for the replacement of the rcar_drm_encoder encoder field with a drm_slave_encoder. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-11-26drm: rcar-du: Pass the encoder DT node to rcar_du_encoder_init()Laurent Pinchart
The encoder DT node will be needed to register an external HDMI encoder. Pass it to the rcar_du_encoder_init() function to prepare for HDMI support. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-11-26drm: rcar-du: Remove platform data supportLaurent Pinchart
All platforms now instantiate the DU through DT, platform data support isn't needed anymore. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-11-26drm: rcar-du: fix error return codeJulia Lawall
Propagate the error code on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-11-26stmmac: platform: fix default values of the filter bins settingHuacai Chen
The commit 3b57de958e2a brought the support for a different amount of the filter bins, but didn't update the platform driver that without CONFIG_OF. Fixes: 3b57de958e2a (net: stmmac: Support devicetree configs for mcast and ucast filter entries) Signed-off-by: Huacai Chen <chenhc@lemote.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26net/mlx4_core: Limit count field to 24 bits in qp_alloc_resJack Morgenstein
Some VF drivers use the upper byte of "param1" (the qp count field) in mlx4_qp_reserve_range() to pass flags which are used to optimize the range allocation. Under the current code, if any of these flags are set, the 32-bit count field yields a count greater than 2^24, which is out of range, and this VF fails. As these flags represent a "best-effort" allocation hint anyway, they may safely be ignored. Therefore, the PF driver may simply mask out the bits. Fixes: c82e9aa0a8 "mlx4_core: resource tracking for HCA resources used by guests" Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26Merge branch 'bcm_sf2'David S. Miller
Florian Fainelli says: ==================== net: dsa: bcm_sf2: misc bugfixes This patch series contains two bug fixes: - first patch fixes an issue on the error path of the driver where we could have left some of our registers mapped - second patch enforces the use of a software reset of the switch to guarantee the HW is in a consistent state prior to software initialization ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26net: dsa: bcm_sf2: reset switch prior to initializationFlorian Fainelli
Our boot agent may have left the switch in an certain configuration state, make sure we issue a software reset prior to configuring the switch in order to ensure the HW is in a consistent state, in particular transmit queues and internal buffers. Fixes: 246d7f773c13 ("net: dsa: add Broadcom SF2 switch driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26net: dsa: bcm_sf2: fix unmapping registers in case of errorsFlorian Fainelli
In case we fail to ioremap() one of our registers, we would be leaking existing mappings, unwind those accordingly on errors. Fixes: 246d7f773c13 ("net: dsa: add Broadcom SF2 switch driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26kvm: fix kvm_is_mmio_pfn() and rename to kvm_is_reserved_pfn()Ard Biesheuvel
This reverts commit 85c8555ff0 ("KVM: check for !is_zero_pfn() in kvm_is_mmio_pfn()") and renames the function to kvm_is_reserved_pfn. The problem being addressed by the patch above was that some ARM code based the memory mapping attributes of a pfn on the return value of kvm_is_mmio_pfn(), whose name indeed suggests that such pfns should be mapped as device memory. However, kvm_is_mmio_pfn() doesn't do quite what it says on the tin, and the existing non-ARM users were already using it in a way which suggests that its name should probably have been 'kvm_is_reserved_pfn' from the beginning, e.g., whether or not to call get_page/put_page on it etc. This means that returning false for the zero page is a mistake and the patch above should be reverted. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26arm/arm64: kvm: drop inappropriate use of kvm_is_mmio_pfn()Ard Biesheuvel
Instead of using kvm_is_mmio_pfn() to decide whether a host region should be stage 2 mapped with device attributes, add a new static function kvm_is_device_pfn() that disregards RAM pages with the reserved bit set, as those should usually not be mapped as device memory. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26arm/arm64: KVM: vgic: Fix error code in kvm_vgic_create()Christoffer Dall
If we detect another vCPU is running we just exit and return 0 as if we succesfully created the VGIC, but the VGIC wouldn't actual be created. This shouldn't break in-kernel behavior because the kernel will not observe the failed the attempt to create the VGIC, but userspace could be rightfully confused. Cc: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26arm64: KVM: Handle traps of ICC_SRE_EL1 as RAZ/WIChristoffer Dall
When running on a system with a GICv3, we currenly don't allow the guest to access the system register interface of the GICv3. We do this by clearing the ICC_SRE_EL2.Enable, which causes all guest accesses to ICC_SRE_EL1 to trap to EL2 and causes all guest accesses to other ICC_ registers to cause an undefined exception in the guest. However, we currently don't handle the trap of guest accesses to ICC_SRE_EL1 and will spill out a warning. The trap just needs to handle the access as RAZ/WI, and a guest that tries to prod this register and set ICC_SRE_EL1.SRE=1, must read back the value (which Linux already does) to see if it succeeded, and will thus observe that ICC_SRE_EL1.SRE was not set. Add the simple trap handler in the sorted table of the system registers. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> [ardb: added cp15 handling] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26arm64: KVM: fix unmapping with 48-bit VAsMark Rutland
Currently if using a 48-bit VA, tearing down the hyp page tables (which can happen in the absence of a GICH or GICV resource) results in the rather nasty splat below, evidently becasue we access a table that doesn't actually exist. Commit 38f791a4e499792e (arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2) added a pgd_none check to __create_hyp_mappings to account for the additional level of tables, but didn't add a corresponding check to unmap_range, and this seems to be the source of the problem. This patch adds the missing pgd_none check, ensuring we don't try to access tables that don't exist. Original splat below: kvm [1]: Using HYP init bounce page @83fe94a000 kvm [1]: Cannot obtain GICH resource Unable to handle kernel paging request at virtual address ffff7f7fff000000 pgd = ffff800000770000 [ffff7f7fff000000] *pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc2+ #89 task: ffff8003eb500000 ti: ffff8003eb45c000 task.ti: ffff8003eb45c000 PC is at unmap_range+0x120/0x580 LR is at free_hyp_pgds+0xac/0xe4 pc : [<ffff80000009b768>] lr : [<ffff80000009cad8>] pstate: 80000045 sp : ffff8003eb45fbf0 x29: ffff8003eb45fbf0 x28: ffff800000736000 x27: ffff800000735000 x26: ffff7f7fff000000 x25: 0000000040000000 x24: ffff8000006f5000 x23: 0000000000000000 x22: 0000007fffffffff x21: 0000800000000000 x20: 0000008000000000 x19: 0000000000000000 x18: ffff800000648000 x17: ffff800000537228 x16: 0000000000000000 x15: 000000000000001f x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000020 x11: 0000000000000062 x10: 0000000000000006 x9 : 0000000000000000 x8 : 0000000000000063 x7 : 0000000000000018 x6 : 00000003ff000000 x5 : ffff800000744188 x4 : 0000000000000001 x3 : 0000000040000000 x2 : ffff800000000000 x1 : 0000007fffffffff x0 : 000000003fffffff Process swapper/0 (pid: 1, stack limit = 0xffff8003eb45c058) Stack: (0xffff8003eb45fbf0 to 0xffff8003eb460000) fbe0: eb45fcb0 ffff8003 0009cad8 ffff8000 fc00: 00000000 00000080 00736140 ffff8000 00736000 ffff8000 00000000 00007c80 fc20: 00000000 00000080 006f5000 ffff8000 00000000 00000080 00743000 ffff8000 fc40: 00735000 ffff8000 006d3030 ffff8000 006fe7b8 ffff8000 00000000 00000080 fc60: ffffffff 0000007f fdac1000 ffff8003 fd94b000 ffff8003 fda47000 ffff8003 fc80: 00502b40 ffff8000 ff000000 ffff7f7f fdec6000 00008003 fdac1630 ffff8003 fca0: eb45fcb0 ffff8003 ffffffff 0000007f eb45fd00 ffff8003 0009b378 ffff8000 fcc0: ffffffea 00000000 006fe000 ffff8000 00736728 ffff8000 00736120 ffff8000 fce0: 00000040 00000000 00743000 ffff8000 006fe7b8 ffff8000 0050cd48 00000000 fd00: eb45fd60 ffff8003 00096070 ffff8000 006f06e0 ffff8000 006f06e0 ffff8000 fd20: fd948b40 ffff8003 0009a320 ffff8000 00000000 00000000 00000000 00000000 fd40: 00000ae0 00000000 006aa25c ffff8000 eb45fd60 ffff8003 0017ca44 00000002 fd60: eb45fdc0 ffff8003 0009a33c ffff8000 006f06e0 ffff8000 006f06e0 ffff8000 fd80: fd948b40 ffff8003 0009a320 ffff8000 00000000 00000000 00735000 ffff8000 fda0: 006d3090 ffff8000 006aa25c ffff8000 00735000 ffff8000 006d3030 ffff8000 fdc0: eb45fdd0 ffff8003 000814c0 ffff8000 eb45fe50 ffff8003 006aaac4 ffff8000 fde0: 006ddd90 ffff8000 00000006 00000000 006d3000 ffff8000 00000095 00000000 fe00: 006a1e90 ffff8000 00735000 ffff8000 006d3000 ffff8000 006aa25c ffff8000 fe20: 00735000 ffff8000 006d3030 ffff8000 eb45fe50 ffff8003 006fac68 ffff8000 fe40: 00000006 00000006 fe293ee6 ffff8003 eb45feb0 ffff8003 004f8ee8 ffff8000 fe60: 004f8ed4 ffff8000 00735000 ffff8000 00000000 00000000 00000000 00000000 fe80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 fea0: 00000000 00000000 00000000 00000000 00000000 00000000 000843d0 ffff8000 fec0: 004f8ed4 ffff8000 00000000 00000000 00000000 00000000 00000000 00000000 fee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffa0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000005 00000000 ffe0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Call trace: [<ffff80000009b768>] unmap_range+0x120/0x580 [<ffff80000009cad4>] free_hyp_pgds+0xa8/0xe4 [<ffff80000009b374>] kvm_arch_init+0x268/0x44c [<ffff80000009606c>] kvm_init+0x24/0x260 [<ffff80000009a338>] arm_init+0x18/0x24 [<ffff8000000814bc>] do_one_initcall+0x88/0x1a0 [<ffff8000006aaac0>] kernel_init_freeable+0x148/0x1e8 [<ffff8000004f8ee4>] kernel_init+0x10/0xd4 Code: 8b000263 92628479 d1000720 eb01001f (f9400340) ---[ end trace 3bc230562e926fa4 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Jungseok Lee <jungseoklee85@gmail.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26of/fdt: memblock_reserve /memreserve/ regions in the case of partial overlapIan Campbell
memblock_is_region_reserved() returns true in the case of a partial overlap, meaning that the current code fails to reserve the non-overlapping portion. This call was introduced as part of d1552ce449eb "of/fdt: move memreserve and dtb memory reservations into core" which went into v3.16. I observed this causing a Midway system with a buggy fdt (the header declares itself to be larger than it really is) failing to boot because the over-inflated size of the fdt was causing it to seem to run into the swapper_pg_dir region, meaning the DT wasn't reserved. The symptoms were failing to find an disks or network and failing to boot. However given the ambiguity of whether things like the initrd are covered by /memreserve/ and similar I think it is best to also register the region rather than just ignoring it. Since memblock_reserve() handles overlaps just fine lets just warn and carry on. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: stable@vger.kernel.org # v3.16+
generated by cgit (git 2.34.1) at 2025-07-19 20:40:10 +0000