| Age | Commit message (Collapse) | Author |
|---|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
drm:
- Fix overflow when generating wedged event
ivpu:
- Increate timeouts
- Fix deadlock in cmdq ioctl
- Unlock mutices in correct order
panel:
- simple: Fix timings for AUO G101EVN010
ttm:
- Fix documentation
- Remove struct ttm_backup
v3d:
- Avoid memory leak in job handling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250508104939.GA76697@2a02-2454-fd5e-fd00-c110-cbf2-6528-c5be.dyn6.pyur.net
|
|
Pull bcachefs fixes from Kent Overstreet:
- Some fixes to help with filesystem analysis: ensure superblock
error count gets written if we go ERO, don't discard the journal
aggressively (so it's available for list_journal -a)
- Fix lost wakeup on arm causing us to get stuck when reading btree
nodes
- Fix fsck failing to exit on ctrl-c
- An additional fix for filesystems with misaligned bucket sizes: we
now ensure that allocations are properly aligned
- Setting background target but not promote target will now leave that
data cached on the foreground target, as it used to
- Revert a change to when we allocate the VFS superblock, this was done
for implementing blk_holder_ops but ended up not being needed, and
allocating a superblock and not setting SB_BORN while we do recovery
caused sync() calls and other things to hang
- Assorted fixes for harmless error messages that caused concern to
users
* tag 'bcachefs-2025-05-08' of git://evilpiepirate.org/bcachefs:
bcachefs: Don't aggressively discard the journal
bcachefs: Ensure superblock gets written when we go ERO
bcachefs: Filter out harmless EROFS error messages
bcachefs: journal_shutdown is EROFS, not EIO
bcachefs: Call bch2_fs_start before getting vfs superblock
bcachefs: fix hung task timeout in journal read
bcachefs: Add missing barriers before wake_up_bit()
bcachefs: Ensure proper write alignment
bcachefs: Improve want_cached_ptr()
bcachefs: thread_with_stdio: fix spinning instead of exiting
|
|
Without CONFIG_DRM_XE_GPUSVM set, GPU SVM is not initialized thus below
warning pops. Refine the flush work code to be controlled by the config
to avoid below warning:
"
[ 453.132028] ------------[ cut here ]------------
[ 453.132527] WARNING: CPU: 9 PID: 4491 at kernel/workqueue.c:4205 __flush_work+0x379/0x3a0
[ 453.133355] Modules linked in: xe drm_ttm_helper ttm gpu_sched drm_buddy drm_suballoc_helper drm_gpuvm drm_exec
[ 453.134352] CPU: 9 UID: 0 PID: 4491 Comm: xe_exec_mix_mod Tainted: G U W 6.15.0-rc3+ #7 PREEMPT(full)
[ 453.135405] Tainted: [U]=USER, [W]=WARN
...
[ 453.136921] RIP: 0010:__flush_work+0x379/0x3a0
[ 453.137417] Code: 8b 45 00 48 8b 55 08 89 c7 48 c1 e8 04 83 e7 08 83 e0 0f 83 cf 02 89 c6 48 0f ba 6d 00 03 e9 d5 fe ff ff 0f 0b e9 db fd ff ff <0f> 0b 45 31 e4 e9 d1 fd ff ff 0f 0b e9 03 ff ff ff 0f 0b e9 d6 fe
[ 453.139250] RSP: 0018:ffffc90000c67b18 EFLAGS: 00010246
[ 453.139782] RAX: 0000000000000000 RBX: ffff888108a24000 RCX: 0000000000002000
[ 453.140521] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8881016d61c8
[ 453.141253] RBP: ffff8881016d61c8 R08: 0000000000000000 R09: 0000000000000000
[ 453.141985] R10: 0000000000000000 R11: 0000000008a24000 R12: 0000000000000001
[ 453.142709] R13: 0000000000000002 R14: 0000000000000000 R15: ffff888107db8c00
[ 453.143450] FS: 00007f44853d4c80(0000) GS:ffff8882f469b000(0000) knlGS:0000000000000000
[ 453.144276] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 453.144853] CR2: 00007f4487629228 CR3: 00000001016aa000 CR4: 00000000000406f0
[ 453.145594] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 453.146320] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 453.147061] Call Trace:
[ 453.147336] <TASK>
[ 453.147579] ? tick_nohz_tick_stopped+0xd/0x30
[ 453.148067] ? xas_load+0x9/0xb0
[ 453.148435] ? xa_load+0x6f/0xb0
[ 453.148781] __xe_vm_bind_ioctl+0xbd5/0x1500 [xe]
[ 453.149338] ? dev_printk_emit+0x48/0x70
[ 453.149762] ? _dev_printk+0x57/0x80
[ 453.150148] ? drm_ioctl+0x17c/0x440
[ 453.150544] ? __drm_dev_vprintk+0x36/0x90
[ 453.150983] ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe]
[ 453.151575] ? drm_ioctl_kernel+0x9f/0xf0
[ 453.151998] ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe]
[ 453.152560] drm_ioctl_kernel+0x9f/0xf0
[ 453.152968] drm_ioctl+0x20f/0x440
[ 453.153332] ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe]
[ 453.153893] ? ioctl_has_perm.constprop.0.isra.0+0xae/0x100
[ 453.154489] ? memory_bm_test_bit+0x5/0x60
[ 453.154935] xe_drm_ioctl+0x47/0x70 [xe]
[ 453.155419] __x64_sys_ioctl+0x8d/0xc0
[ 453.155824] do_syscall_64+0x47/0x110
[ 453.156228] entry_SYSCALL_64_after_hwframe+0x76/0x7e
"
v2 (Matt):
refine commit message to have more details
add Fixes tag
move the code to xe_svm.h which already have the config
remove a blank line per codestyle suggestion
Fixes: 63f6e480d115 ("drm/xe: Add SVM garbage collector")
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250502170052.1787973-1-shuicheng.lin@intel.com
(cherry picked from commit 9d80698bcd97a5ad1088bcbb055e73fd068895e2)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
xe_force_wake_get() is dependent on xe_pm_runtime_get(), so for
the release path, xe_force_wake_put() should be called first then
xe_pm_runtime_put().
Combine the error path and normal path together with goto.
Fixes: 85d547608ef5 ("drm/xe/xe_gt_debugfs: Update handling of xe_force_wake_get return")
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20250507022302.2187527-1-shuicheng.lin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 432cd94efdca06296cc5e76d673546f58aa90ee1)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The workqueue used for the reset worker is marked as WQ_MEM_RECLAIM,
while the GSC one isn't (and can't be as we need to do memory
allocations in the gsc worker). Therefore, we can't flush the latter
from the former.
The reason why we had such a flush was to avoid interrupting either
the GSC FW load or in progress GSC proxy operations. GSC proxy
operations fall into 2 categories:
1) GSC proxy init: this only happens once immediately after GSC FW load
and does not support being interrupted. The only way to recover from
an interruption of the proxy init is to do an FLR and re-load the GSC.
2) GSC proxy request: this can happen in response to a request that
the driver sends to the GSC. If this is interrupted, the GSC FW will
timeout and the driver request will be failed, but overall the GSC
will keep working fine.
Flushing the work allowed us to avoid interruption in both cases (unless
the hang came from the GSC engine itself, in which case we're toast
anyway). However, a failure on a proxy request is tolerable if we're in
a scenario where we're triggering a GT reset (i.e., something is already
gone pretty wrong), so what we really need to avoid is interrupting
the init flow, which we can do by polling on the register that reports
when the proxy init is complete (as that ensure us that all the load and
init operations have been completed).
Note that during suspend we still want to do a flush of the worker to
make sure it completes any operations involving the HW before the power
is cut.
v2: fix spelling in commit msg, rename waiter function (Julia)
Fixes: dd0e89e5edc2 ("drm/xe/gsc: GSC FW load")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4830
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://lore.kernel.org/r/20250502155104.2201469-1-daniele.ceraolospurio@intel.com
(cherry picked from commit 12370bfcc4f0bdf70279ec5b570eb298963422b5)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
LNCF registers report wrong values when XE_FORCEWAKE_GT
only is held. Holding XE_FORCEWAKE_ALL ensures correct
operations on LNCF regs.
V2(Himal):
- Use xe_force_wake_ref_has_domain
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1999
Fixes: a6a4ea6d7d37 ("drm/xe: Add mocs kunit")
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250428082357.1730068-1-tejas.upadhyay@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
(cherry picked from commit 70a2585e582058e94fe4381a337be42dec800337)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
For an unknown reason the math to determine the PF queue size does is
not correct - compute UMD applications are overflowing the PF queue
which is fatal. A multippier of 8 fixes the problem.
Fixes: 3338e4f90c14 ("drm/xe: Use topology to determine page fault queue size")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jagmeet Randhawa <jagmeet.randhawa@intel.com>
Link: https://lore.kernel.org/r/20250408155915.78770-1-matthew.brost@intel.com
(cherry picked from commit 29582e0ea75c95668d168b12406e3c56cf5a73c4)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Pull vfio fix from Alex Williamson:
- Fix an issue in vfio-pci huge_fault handling by aligning faults to
the order, resulting in deterministic use of huge pages. This
avoids a race where simultaneous aligned and unaligned faults to
the same PMD can result in a VM_FAULT_OOM and subsequent VM crash.
(Alex Williamson)
* tag 'vfio-v6.15-rc6' of https://github.com/awilliam/linux-vfio:
vfio/pci: Align huge faults to order
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux into fixes
riscv fixes for 6.15-rc6
- A fix to handle compressed halfword load/store instructions misaligned accesses
- A fix to allow user memory access while handling a misaligned access
- 2 fixes to return an error if the pointer masking extension is not implemented on the platform but userspace still tries to access it, which caused oops on some early platforms
- A fix to prevent the stripping of .rela.dyn so that a vmlinux loaded by kexec can successfully boot
* tag 'riscv-fixes-6.15-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux:
riscv: Disallow PR_GET_TAGGED_ADDR_CTRL without Supm
scripts: Do not strip .rela.dyn section
riscv: Fix kernel crash due to PR_SET_TAGGED_ADDR_CTRL
riscv: misaligned: use get_user() instead of __get_user()
riscv: misaligned: enable IRQs while handling misaligned accesses
riscv: misaligned: factorize trap handling
riscv: misaligned: Add handling for ZCB instructions
|
|
Reading back the remapped HDP flush register seems to cause
problems on some platforms. All we need is a read, so read back
the memcfg register.
Fixes: 689275140cb8 ("drm/amdgpu/hdp7.0: do a posting read when flushing HDP")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lists.freedesktop.org/archives/amd-gfx/2025-April/123150.html
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4119
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3908
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dbc064adfcf9095e7d895bea87b2f75c1ab23236)
Cc: stable@vger.kernel.org
|
|
Reading back the remapped HDP flush register seems to cause
problems on some platforms. All we need is a read, so read back
the memcfg register.
Fixes: abe1cbaec6cf ("drm/amdgpu/hdp6.0: do a posting read when flushing HDP")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lists.freedesktop.org/archives/amd-gfx/2025-April/123150.html
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4119
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3908
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 84141ff615951359c9a99696fd79a36c465ed847)
Cc: stable@vger.kernel.org
|
|
Reading back the remapped HDP flush register seems to cause
problems on some platforms. All we need is a read, so read back
the memcfg register.
Fixes: f756dbac1ce1 ("drm/amdgpu/hdp5.2: do a posting read when flushing HDP")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lists.freedesktop.org/archives/amd-gfx/2025-April/123150.html
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4119
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3908
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4a89b7698e771914b4d5b571600c76e2fdcbe2a9)
Cc: stable@vger.kernel.org
|
|
Reading back the remapped HDP flush register seems to cause
problems on some platforms. All we need is a read, so read back
the memcfg register.
Fixes: cf424020e040 ("drm/amdgpu/hdp5.0: do a posting read when flushing HDP")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lists.freedesktop.org/archives/amd-gfx/2025-April/123150.html
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4119
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3908
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a5cb344033c7598762e89255e8ff52827abb57a4)
Cc: stable@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN, WiFi and netfilter.
We have still a comple of regressions open due to the recent
drivers locking refactor. The patches are in-flight, but not
ready yet.
Current release - regressions:
- core: lock netdevices during dev_shutdown
- sch_htb: make htb_deactivate() idempotent
- eth: virtio-net: don't re-enable refill work too early
Current release - new code bugs:
- eth: icssg-prueth: fix kernel panic during concurrent Tx queue
access
Previous releases - regressions:
- gre: fix again IPv6 link-local address generation.
- eth: b53: fix learning on VLAN unaware bridges
Previous releases - always broken:
- wifi: fix out-of-bounds access during multi-link element
defragmentation
- can:
- initialize spin lock on device probe
- fix order of unregistration calls
- openvswitch: fix unsafe attribute parsing in output_userspace()
- eth:
- virtio-net: fix total qstat values
- mtk_eth_soc: reset all TX queues on DMA free
- fbnic: firmware IPC mailbox fixes"
* tag 'net-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits)
virtio-net: fix total qstat values
net: export a helper for adding up queue stats
fbnic: Do not allow mailbox to toggle to ready outside fbnic_mbx_poll_tx_ready
fbnic: Pull fbnic_fw_xmit_cap_msg use out of interrupt context
fbnic: Improve responsiveness of fbnic_mbx_poll_tx_ready
fbnic: Cleanup handling of completions
fbnic: Actually flush_tx instead of stalling out
fbnic: Add additional handling of IRQs
fbnic: Gate AXI read/write enabling on FW mailbox
fbnic: Fix initialization of mailbox descriptor rings
net: dsa: b53: do not set learning and unicast/multicast on up
net: dsa: b53: fix learning on VLAN unaware bridges
net: dsa: b53: fix toggling vlan_filtering
net: dsa: b53: do not program vlans when vlan filtering is off
net: dsa: b53: do not allow to configure VLAN 0
net: dsa: b53: always rejoin default untagged VLAN on bridge leave
net: dsa: b53: fix VLAN ID for untagged vlan on bridge leave
net: dsa: b53: fix flushing old pvid VLAN on pvid change
net: dsa: b53: fix clearing PVID of a port
net: dsa: b53: keep CPU port always tagged again
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Fix potential use-after-free bug and missing error handling in PCI
code
- Fix dcssblk build error
- Fix last breaking event handling in case of stack corruption to allow
for better error reporting
- Update defconfigs
* tag 's390-6.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pci: Fix duplicate pci_dev_put() in disable_slot() when PF has child VFs
s390/pci: Fix missing check for zpci_create_device() error return
s390: Update defconfigs
s390/dcssblk: Fix build error with CONFIG_DAX=m and CONFIG_DCSSBLK=y
s390/entry: Fix last breaking event handling in case of stack corruption
s390/configs: Enable options required for TC flow offload
s390/configs: Enable VDPA on Nvidia ConnectX-6 network card
|
|
Pull smb server fixes from Steve French:
- Fix UAF closing file table (e.g. in tree disconnect)
- Fix potential out of bounds write
- Fix potential memory leak parsing lease state in open
- Fix oops in rename with empty target
* tag 'v6.15-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: Fix UAF in __close_file_table_ids
ksmbd: prevent out-of-bounds stream writes by validating *pos
ksmbd: fix memory leak in parse_lease_state()
ksmbd: prevent rename with empty string
|
|
Pull NVMe fix from Christoph:
"nvme fixes for linux 6.15
- unblock ctrl state transition for firmware update (Daniel Wagner)"
* tag 'nvme-6.15-2025-05-08' of git://git.infradead.org/nvme:
nvme: unblock ctrl state transition for firmware update
|
|
Ever since commit eca2040972b4("scsi: block: ioprio: Clean up interface
definition"), the macro IOPRIO_PRIO_LEVEL() will mask the level value to
something between 0 and 7 so necessarily, level will always be lower than
IOPRIO_NR_LEVELS(8).
Remove this obsolete check.
Reported-by: Kexin Wei <ys.weikexin@h3c.com>
Cc: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Aaron Lu <ziqianlu@bytedance.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250508083018.GA769554@bytedance
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Set the magic BP_SPEC_REDUCE bit to mitigate SRSO when running VMs if and
only if KVM has at least one active VM. Leaving the bit set at all times
unfortunately degrades performance by a wee bit more than expected.
Use a dedicated spinlock and counter instead of hooking virtualization
enablement, as changing the behavior of kvm.enable_virt_at_load based on
SRSO_BP_SPEC_REDUCE is painful, and has its own drawbacks, e.g. could
result in performance issues for flows that are sensitive to VM creation
latency.
Defer setting BP_SPEC_REDUCE until VMRUN is imminent to avoid impacting
performance on CPUs that aren't running VMs, e.g. if a setup is using
housekeeping CPUs. Setting BP_SPEC_REDUCE in task context, i.e. without
blasting IPIs to all CPUs, also helps avoid serializing 1<=>N transitions
without incurring a gross amount of complexity (see the Link for details
on how ugly coordinating via IPIs gets).
Link: https://lore.kernel.org/all/aBOnzNCngyS_pQIW@google.com
Fixes: 8442df2b49ed ("x86/bugs: KVM: Add support for SRSO_MSR_FIX")
Reported-by: Michael Larabel <Michael@michaellarabel.com>
Closes: https://www.phoronix.com/review/linux-615-amd-regression
Cc: Borislav Petkov <bp@alien8.de>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250505180300.973137-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When the prctl() interface for pointer masking was added, it did not
check that the pointer masking ISA extension was supported, only the
individual submodes. Userspace could still attempt to disable pointer
masking and query the pointer masking state. commit 81de1afb2dd1
("riscv: Fix kernel crash due to PR_SET_TAGGED_ADDR_CTRL") disallowed
the former, as the senvcfg write could crash on older systems.
PR_GET_TAGGED_ADDR_CTRL state does not crash, because it reads only
kernel-internal state and not senvcfg, but it should still be disallowed
for consistency.
Fixes: 09d6775f503b ("riscv: Add support for userspace pointer masking")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20250507145230.2272871-1-samuel.holland@sifive.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
|
The .rela.dyn section contains runtime relocations and is only emitted
for a relocatable kernel.
riscv uses this section to relocate the kernel at runtime but that section
is stripped from vmlinux. That prevents kexec to successfully load vmlinux
since it does not contain the relocations info needed.
Fixes: 559d1e45a16d ("riscv: Use --emit-relocs in order to move .rela.dyn in init")
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250408072851.90275-1-alexghiti@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
|
When userspace does PR_SET_TAGGED_ADDR_CTRL, but Supm extension is not
available, the kernel crashes:
Oops - illegal instruction [#1]
[snip]
epc : set_tagged_addr_ctrl+0x112/0x15a
ra : set_tagged_addr_ctrl+0x74/0x15a
epc : ffffffff80011ace ra : ffffffff80011a30 sp : ffffffc60039be10
[snip]
status: 0000000200000120 badaddr: 0000000010a79073 cause: 0000000000000002
set_tagged_addr_ctrl+0x112/0x15a
__riscv_sys_prctl+0x352/0x73c
do_trap_ecall_u+0x17c/0x20c
andle_exception+0x150/0x15c
Fix it by checking if Supm is available.
Fixes: 09d6775f503b ("riscv: Add support for userspace pointer masking")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20250504101920.3393053-1-namcao@linutronix.de
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
|
Now that we can safely handle user memory accesses while in the
misaligned access handlers, use get_user() instead of __get_user() to
have user memory access checks.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250422162324.956065-4-cleger@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
|
We can safely reenable IRQs if coming from userspace. This allows to
access user memory that could potentially trigger a page fault.
Fixes: b686ecdeacf6 ("riscv: misaligned: Restrict user access to kernel memory")
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250422162324.956065-3-cleger@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
|
Since both load/store and user/kernel should use almost the same path and
that we are going to add some code around that, factorize it.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250422162324.956065-2-cleger@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
|
Seth's mails bounce back, remove his maintainership.
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250505231511.3175151-1-andi.shyti@kernel.org
|
|
Jakub Kicinski says:
====================
virtio-net: fix total qstat values
Another small fix discovered after we enabled virtio multi-queue
in netdev CI. The queue stat test fails:
# Exception| Exception: Qstats are lower, fetched later
not ok 3 stats.pkt_byte_sum
The queue stats from disabled queues are supposed to be reported
in the "base" stats.
====================
Link: https://patch.msgid.link/20250507003221.823267-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
NIPA tests report that the interface statistics reported
via qstat are lower than those reported via ip link.
Looks like this is because some tests flip the queue
count up and down, and we end up with some of the traffic
accounted on disabled queues.
Add up counters from disabled queues.
Fixes: d888f04c09bb ("virtio-net: support queue stat")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250507003221.823267-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Older drivers and drivers with lower queue counts often have a static
array of queues, rather than allocating structs for each queue on demand.
Add a helper for adding up qstats from a queue range. Expectation is
that driver will pass a queue range [netdev->real_num_*x_queues, MAX).
It was tempting to always use num_*x_queues as the end, but virtio
seems to clamp its queue count after allocating the netdev. And this
way we can trivaly reuse the helper for [0, real_..).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250507003221.823267-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Alexander Duyck says:
====================
fbnic: FW IPC Mailbox fixes
This series is meant to address a number of issues that have been found in
the FW IPC mailbox over the past several months.
The main issues addressed are:
1. Resolve a potential race between host and FW during initialization that
can cause the FW to only have the lower 32b of an address.
2. Block the FW from issuing DMA requests after we have closed the mailbox
and before we have started issuing requests on it.
3. Fix races in the IRQ handlers that can cause the IRQ to unmask itself if
it is being processed while we are trying to disable it.
4. Cleanup the Tx flush logic so that we actually lock down the Tx path
before we start flushing it instead of letting it free run while we are
shutting it down.
5. Fix several memory leaks that could occur if we failed initialization.
6. Cleanup the mailbox completion if we are flushing Tx since we are no
longer processing Rx.
7. Move several allocations out of a potential IRQ/atomic context.
There have been a few optimizations we also picked up since then. Rather
than split them out I just folded them into these diffs. They mostly
address minor issues such as how long it takes to initialize and/or fail so
I thought they could probably go in with the rest of the patches. They
consist of:
1. Do not sleep more than 20ms waiting on FW to respond as the 200ms value
likely originated from simulation/emulation testing.
2. Use jiffies to determine timeout instead of sleep * attempts for better
accuracy.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://patch.msgid.link/174654659243.499179.11194817277075480209.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We had originally thought to have the mailbox go to ready in the background
while we were doing other things. One issue with this though is that we
can't disable it by clearing the ready state without also blocking
interrupts or calls to mbx_poll as it will just pop back to life during an
interrupt.
In order to prevent that from happening we can pull the code for toggling
to ready out of the interrupt path and instead place it in the
fbnic_mbx_poll_tx_ready path so that it becomes the only spot where the
Rx/Tx can toggle to the ready state. By doing this we can prevent races
where we disable the DMA and/or free buffers only to have an interrupt fire
and undo what we have done.
Fixes: da3cde08209e ("eth: fbnic: Add FW communication mechanism")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654722518.499179.11612865740376848478.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This change pulls the call to fbnic_fw_xmit_cap_msg out of
fbnic_mbx_init_desc_ring and instead places it in the polling function for
getting the Tx ready. Doing that we can avoid the potential issue with an
interrupt coming in later from the firmware that causes it to get fired in
interrupt context.
Fixes: 20d2e88cc746 ("eth: fbnic: Add initial messaging to notify FW of our presence")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654721876.499179.9839651602256668493.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There were a couple different issues found in fbnic_mbx_poll_tx_ready.
Among them were the fact that we were sleeping much longer than we actually
needed to as the actual FW could respond in under 20ms. The other issue was
that we would just keep polling the mailbox even if the device itself had
gone away.
To address the responsiveness issues we can decrease the sleeps to 20ms and
use a jiffies based timeout value rather than just counting the number of
times we slept and then polled.
To address the hardware going away we can move the check for the firmware
BAR being present from where it was and place it inside the loop after the
mailbox descriptor ring is initialized and before we sleep so that we just
abort and return an error if the device went away during initialization.
With these two changes we see a significant improvement in boot times for
the driver.
Fixes: da3cde08209e ("eth: fbnic: Add FW communication mechanism")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654721224.499179.2698616208976624755.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There was an issue in that if we were to shutdown we could be left with
a completion in flight as the mailbox went away. To address that I have
added an fbnic_mbx_evict_all_cmpl function that is meant to essentially
create a "broken pipe" type response so that all callers will receive an
error indicating that the connection has been broken as a result of us
shutting down the mailbox.
Fixes: 378e5cc1c6c6 ("eth: fbnic: hwmon: Add completion infrastructure for firmware requests")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654720578.499179.380252598204530873.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The fbnic_mbx_flush_tx function had a number of issues.
First, we were waiting 200ms for the firmware to process the packets. We
can drop this to 20ms and in almost all cases this should be more than
enough time. So by changing this we can significantly reduce shutdown time.
Second, we were not making sure that the Tx path was actually shut off. As
such we could still have packets added while we were flushing the mailbox.
To prevent that we can now clear the ready flag for the Tx side and it
should stay down since the interrupt is disabled.
Third, we kept re-reading the tail due to the second issue. The tail should
not move after we have started the flush so we can just read it once while
we are holding the mailbox Tx lock. By doing that we are guaranteed that
the value should be consistent.
Fourth, we were keeping a count of descriptors cleaned due to the second
and third issues called out. That count is not a valid reason to be exiting
the cleanup, and with the tail only being read once we shouldn't see any
cases where the tail moves after the disable so the tracking of count can
be dropped.
Fifth, we were using attempts * sleep time to determine how long we would
wait in our polling loop to flush out the Tx. This can be very imprecise.
In order to tighten up the timing we are shifting over to using a jiffies
value of jiffies + 10 * HZ + 1 to determine the jiffies value we should
stop polling at as this should be accurate within once sleep cycle for the
total amount of time spent polling.
Fixes: da3cde08209e ("eth: fbnic: Add FW communication mechanism")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654719929.499179.16406653096197423749.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We have two issues that need to be addressed in our IRQ handling.
One is the fact that we can end up double-freeing IRQs in the event of an
exception handling error such as a PCIe reset/recovery that fails. To
prevent that from becoming an issue we can use the msix_vector values to
indicate that we have successfully requested/freed the IRQ by only setting
or clearing them when we have completed the given action.
The other issue is that we have several potential races in our IRQ path due
to us manipulating the mask before the vector has been truly disabled. In
order to handle that in the case of the FW mailbox we need to not
auto-enable the IRQ and instead will be enabling/disabling it separately.
In the case of the PCS vector we can mitigate this by unmapping it and
synchronizing the IRQ before we clear the mask.
The general order of operations after this change is now to request the
interrupt, poll the FW mailbox to ready, and then enable the interrupt. For
the shutdown we do the reverse where we disable the interrupt, flush any
pending Tx, and then free the IRQ. I am renaming the enable/disable to
request/free to be equivilent with the IRQ calls being used. We may see
additions in the future to enable/disable the IRQs versus request/free them
for certain use cases.
Fixes: da3cde08209e ("eth: fbnic: Add FW communication mechanism")
Fixes: 69684376eed5 ("eth: fbnic: Add link detection")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654719271.499179.3634535105127848325.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In order to prevent the device from throwing spurious writes and/or reads
at us we need to gate the AXI fabric interface to the PCIe until such time
as we know the FW is in a known good state.
To accomplish this we use the mailbox as a mechanism for us to recognize
that the FW has acknowledged our presence and is no longer sending any
stale message data to us.
We start in fbnic_mbx_init by calling fbnic_mbx_reset_desc_ring function,
disabling the DMA in both directions, and then invalidating all the
descriptors in each ring.
We then poll the mailbox in fbnic_mbx_poll_tx_ready and when the interrupt
is set by the FW we pick it up and mark the mailboxes as ready, while also
enabling the DMA.
Once we have completed all the transactions and need to shut down we call
into fbnic_mbx_clean which will in turn call fbnic_mbx_reset_desc_ring for
each ring and shut down the DMA and once again invalidate the descriptors.
Fixes: 3646153161f1 ("eth: fbnic: Add register init to set PCIe/Ethernet device config")
Fixes: da3cde08209e ("eth: fbnic: Add FW communication mechanism")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654718623.499179.7445197308109347982.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Address to issues with the FW mailbox descriptor initialization.
We need to reverse the order of accesses when we invalidate an entry versus
writing an entry. When writing an entry we write upper and then lower as
the lower 32b contain the valid bit that makes the entire address valid.
However for invalidation we should write it in the reverse order so that
the upper is marked invalid before we update it.
Without this change we may see FW attempt to access pages with the upper
32b of the address set to 0 which will likely result in DMAR faults due to
write access failures on mailbox shutdown.
Fixes: da3cde08209e ("eth: fbnic: Add FW communication mechanism")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654717972.499179.8083789731819297034.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
On XEN PV, folio_pte_batch() can incorrectly batch beyond the end of a
folio due to a corner case in pte_advance_pfn(). Specifically, when the
PFN following the folio maps to an invalidated MFN,
expected_pte = pte_advance_pfn(expected_pte, nr);
produces a pte_none(). If the actual next PTE in memory is also
pte_none(), the pte_same() succeeds,
if (!pte_same(pte, expected_pte))
break;
the loop is not broken, and batching continues into unrelated memory.
For example, with a 4-page folio, the PTE layout might look like this:
[ 53.465673] [ T2552] folio_pte_batch: printing PTE values at addr=0x7f1ac9dc5000
[ 53.465674] [ T2552] PTE[453] = 000000010085c125
[ 53.465679] [ T2552] PTE[454] = 000000010085d125
[ 53.465682] [ T2552] PTE[455] = 000000010085e125
[ 53.465684] [ T2552] PTE[456] = 000000010085f125
[ 53.465686] [ T2552] PTE[457] = 0000000000000000 <-- not present
[ 53.465689] [ T2552] PTE[458] = 0000000101da7125
pte_advance_pfn(PTE[456]) returns a pte_none() due to invalid PFN->MFN
mapping. The next actual PTE (PTE[457]) is also pte_none(), so the loop
continues and includes PTE[457] in the batch, resulting in 5 batched
entries for a 4-page folio. This triggers the following warning:
[ 53.465751] [ T2552] page: refcount:85 mapcount:20 mapping:ffff88813ff4f6a8 index:0x110 pfn:0x10085c
[ 53.465754] [ T2552] head: order:2 mapcount:80 entire_mapcount:0 nr_pages_mapped:4 pincount:0
[ 53.465756] [ T2552] memcg:ffff888003573000
[ 53.465758] [ T2552] aops:0xffffffff8226fd20 ino:82467c dentry name(?):"libc.so.6"
[ 53.465761] [ T2552] flags: 0x2000000000416c(referenced|uptodate|lru|active|private|head|node=0|zone=2)
[ 53.465764] [ T2552] raw: 002000000000416c ffffea0004021f08 ffffea0004021908 ffff88813ff4f6a8
[ 53.465767] [ T2552] raw: 0000000000000110 ffff888133d8bd40 0000005500000013 ffff888003573000
[ 53.465768] [ T2552] head: 002000000000416c ffffea0004021f08 ffffea0004021908 ffff88813ff4f6a8
[ 53.465770] [ T2552] head: 0000000000000110 ffff888133d8bd40 0000005500000013 ffff888003573000
[ 53.465772] [ T2552] head: 0020000000000202 ffffea0004021701 000000040000004f 00000000ffffffff
[ 53.465774] [ T2552] head: 0000000300000003 8000000300000002 0000000000000013 0000000000000004
[ 53.465775] [ T2552] page dumped because: VM_WARN_ON_FOLIO((_Generic((page + nr_pages - 1), const struct page *: (const struct folio *)_compound_head(page + nr_pages - 1), struct page *: (struct folio *)_compound_head(page + nr_pages - 1))) != folio)
Original code works as expected everywhere, except on XEN PV, where
pte_advance_pfn() can yield a pte_none() after balloon inflation due to
MFNs invalidation. In XEN, pte_advance_pfn() ends up calling
__pte()->xen_make_pte()->pte_pfn_to_mfn(), which returns pte_none() when
mfn == INVALID_P2M_ENTRY.
The pte_pfn_to_mfn() documents that nastiness:
If there's no mfn for the pfn, then just create an
empty non-present pte. Unfortunately this loses
information about the original pfn, so
pte_mfn_to_pfn is asymmetric.
While such hacks should certainly be removed, we can do better in
folio_pte_batch() and simply check ahead of time how many PTEs we can
possibly batch in our folio.
This way, we can not only fix the issue but cleanup the code: removing the
pte_pfn() check inside the loop body and avoiding end_ptr comparison +
arithmetic.
Link: https://lkml.kernel.org/r/20250502215019.822-2-arkamar@atlas.cz
Fixes: f8d937761d65 ("mm/memory: optimize fork() with PTE-mapped THP")
Co-developed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Petr Vaněk <arkamar@atlas.cz>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After commit c0e473a0d226 ("block: fix race between set_blocksize and read
paths") was merged, set_blocksize() called by sb_set_blocksize() now locks
the inode of the backing device file. As a result of this change, syzbot
started reporting deadlock warnings due to a circular dependency involving
the semaphore "ns_sem" of the nilfs object, the inode lock of the backing
device file, and the locks that this inode lock is transitively dependent
on.
This is caused by a new lock dependency added by the above change, since
init_nilfs() calls sb_set_blocksize() in the lock section of "ns_sem".
However, these warnings are false positives because init_nilfs() is called
in the early stage of the mount operation and the filesystem has not yet
started.
The reason why "ns_sem" is locked in init_nilfs() was to avoid a race
condition in nilfs_fill_super() caused by sharing a nilfs object among
multiple filesystem instances (super block structures) in the early
implementation. However, nilfs objects and super block structures have
long ago become one-to-one, and there is no longer any need to use the
semaphore there.
So, fix this issue by removing the use of the semaphore "ns_sem" in
init_nilfs().
Link: https://lkml.kernel.org/r/20250503053327.12294-1-konishi.ryusuke@gmail.com
Fixes: c0e473a0d226 ("block: fix race between set_blocksize and read paths")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+00f7f5b884b117ee6773@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=00f7f5b884b117ee6773
Tested-by: syzbot+00f7f5b884b117ee6773@syzkaller.appspotmail.com
Reported-by: syzbot+f30591e72bfc24d4715b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f30591e72bfc24d4715b
Tested-by: syzbot+f30591e72bfc24d4715b@syzkaller.appspotmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since commit d2d786714080 ("mm/hugetlb: enable bootmem allocation from CMA
areas"), a flag is used to mark hugetlb folios as allocated from CMA.
This flag is also used to decide if it should be freed to CMA.
However, the flag isn't copied to the smaller folios when a hugetlb folio
is broken up for demotion, which would cause it to be freed incorrectly.
Fix this by copying the flag to the smaller order hugetlb pages created
from the original one.
Link: https://lkml.kernel.org/r/20250501044325.20365-1-fvdl@google.com
Fixes: d2d786714080 ("mm/hugetlb: enable bootmem allocation from CMA areas")
Signed-off-by: Frank van der Linden <fvdl@google.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Jane Chu <Jane.Chu@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The !CONFIG_THP_SWAP check existed before just fine because slot cache
would reject high order allocation and let the caller split all folios and
try again.
But slot cache is gone, so large allocation will directly go to the
allocator, and the allocator should just fail silently to inform caller to
do the folio split, this is totally fine and expected.
Remove this meaningless warning.
Link: https://lkml.kernel.org/r/20250429094803.85518-1-ryncsn@gmail.com
Fixes: 0ff67f990bd4 ("mm, swap: remove swap slot cache")
Signed-off-by: Kairui Song <kasong@tencent.com>
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Closes: https://lore.kernel.org/linux-mm/20250428135252.25453B17-hca@linux.ibm.com/
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The compiler is unaware of the size of code generated by the ".rept"
assembler directive. This results in the compiler emitting branch
instructions where the offset to branch to exceeds the maximum allowed
value, resulting in build failures like the following:
CC protection_keys
/tmp/ccypKWAE.s: Assembler messages:
/tmp/ccypKWAE.s:2073: Error: operand out of range (0x0000000000020158
is not between 0xffffffffffff8000 and 0x0000000000007ffc)
/tmp/ccypKWAE.s:2509: Error: operand out of range (0x0000000000020130
is not between 0xffffffffffff8000 and 0x0000000000007ffc)
Fix the issue by manually adding nop instructions using the preprocessor.
Link: https://lkml.kernel.org/r/20250428131937.641989-2-nysal@linux.ibm.com
Fixes: 46036188ea1f ("selftests/mm: build with -O2")
Reported-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Nysal Jan K.A. <nysal@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Donet Tom <donettom@linux.ibm.com>
Tested-by: Donet Tom <donettom@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 50910acd6f615 ("selftests/mm: use sys_pkey helpers consistently")
added a pkey_util.c to refactor some of the protection_keys functions
accessible by other tests. But this broken the build in powerpc in two
ways,
pkey-powerpc.h: In function `arch_is_powervm':
pkey-powerpc.h:73:21: error: storage size of `buf' isn't known
73 | struct stat buf;
| ^~~
pkey-powerpc.h:75:14: error: implicit declaration of function `stat'; did you mean `strcat'? [-Wimplicit-function-declaration]
75 | if ((stat("/sys/firmware/devicetree/base/ibm,partition-name", &buf) == 0) &&
| ^~~~
| strcat
Since pkey_util.c includes pkeys-helper.h, which in turn includes pkeys-powerpc.h,
stat.h including is missing for "struct stat". This is fixed by adding "sys/stat.h"
in pkeys-powerpc.h
Secondly,
pkey-powerpc.h:55:18: warning: format `%llx' expects argument of type `long long unsigned int', but argument 3 has type `u64' {aka `long unsigned int'} [-Wformat=]
55 | dprintf4("%s() changing %016llx to %016llx\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
56 | __func__, __read_pkey_reg(), pkey_reg);
| ~~~~~~~~~~~~~~~~~
| |
| u64 {aka long unsigned int}
pkey-helpers.h:63:32: note: in definition of macro `dprintf_level'
63 | sigsafe_printf(args); \
| ^~~~
These format specifier related warning are removed by adding
"__SANE_USERSPACE_TYPES__" to pkeys_utils.c.
Link: https://lkml.kernel.org/r/20250428131937.641989-1-nysal@linux.ibm.com
Fixes: 50910acd6f61 ("selftests/mm: use sys_pkey helpers consistently")
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Nysal Jan K.A. <nysal@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Introduce struct vm_struct::requested_size so that the requested
(re)allocation size is retained separately from the allocated area size.
This means that KASAN will correctly poison the correct spans of requested
bytes. This also means we can support growing the usable portion of an
allocation that can already be supported by the existing area's existing
allocation.
Link: https://lkml.kernel.org/r/20250426001105.it.679-kees@kernel.org
Fixes: 3ddc2fefe6f3 ("mm: vmalloc: implement vrealloc()")
Signed-off-by: Kees Cook <kees@kernel.org>
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Closes: https://lore.kernel.org/all/20250408192503.6149a816@outsider.home/
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current implementation of the guard region tests assume that /tmp is
mounted as tmpfs, that is shmem.
This isn't always the case, and at least one instance of a spurious test
failure has been reported as a result.
This assumption is unsafe, rushed and silly - and easily remedied by
simply using memfd, so do so.
We also have to fixup the readonly_file test to explicitly only be
applicable to file-backed cases.
Link: https://lkml.kernel.org/r/20250425162436.564002-1-lorenzo.stoakes@oracle.com
Fixes: 272f37d3e99a ("tools/selftests: expand all guard region tests to file-backed")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Ryan Roberts <ryan.roberts@arm.com>
Closes: https://lore.kernel.org/linux-mm/a2d2766b-0ab4-437b-951a-8595a7506fe9@arm.com/
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently quota recovery is synchronized with unmount using sb->s_umount
semaphore. That is however prone to deadlocks because
flush_workqueue(osb->ocfs2_wq) called from umount code can wait for quota
recovery to complete while ocfs2_finish_quota_recovery() waits for
sb->s_umount semaphore.
Grabbing of sb->s_umount semaphore in ocfs2_finish_quota_recovery() is
only needed to protect that function from disabling of quotas from
ocfs2_dismount_volume(). Handle this problem by disabling quota recovery
early during unmount in ocfs2_dismount_volume() instead so that we can
drop acquisition of sb->s_umount from ocfs2_finish_quota_recovery().
Link: https://lkml.kernel.org/r/20250424134515.18933-6-jack@suse.cz
Fixes: 5f530de63cfc ("ocfs2: Use s_umount for quota recovery protection")
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Shichangkuo <shi.changkuo@h3c.com>
Reported-by: Murad Masimov <m.masimov@mt-integration.ru>
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Tested-by: Heming Zhao <heming.zhao@suse.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We will need ocfs2 recovery thread to acknowledge transitions of
recovery_state when disabling particular types of recovery. This is
similar to what currently happens when disabling recovery completely, just
more general. Implement the handshake and use it for exit from recovery.
Link: https://lkml.kernel.org/r/20250424134515.18933-5-jack@suse.cz
Fixes: 5f530de63cfc ("ocfs2: Use s_umount for quota recovery protection")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Tested-by: Heming Zhao <heming.zhao@suse.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Murad Masimov <m.masimov@mt-integration.ru>
Cc: Shichangkuo <shi.changkuo@h3c.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "ocfs2: Fix deadlocks in quota recovery", v3.
This implements another approach to fixing quota recovery deadlocks. We
avoid grabbing sb->s_umount semaphore from ocfs2_finish_quota_recovery()
and instead stop quota recovery early in ocfs2_dismount_volume().
This patch (of 3):
We will need more recovery states than just pure enable / disable to fix
deadlocks with quota recovery. Switch osb->disable_recovery to enum.
Link: https://lkml.kernel.org/r/20250424134301.1392-1-jack@suse.cz
Link: https://lkml.kernel.org/r/20250424134515.18933-4-jack@suse.cz
Fixes: 5f530de63cfc ("ocfs2: Use s_umount for quota recovery protection")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Tested-by: Heming Zhao <heming.zhao@suse.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Murad Masimov <m.masimov@mt-integration.ru>
Cc: Shichangkuo <shi.changkuo@h3c.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When I started working for BayLibre I wasn't aware that the mailserver
rewrote the sender address and so a few commits entered kernel history
with a working but unexpected address. Map the unexpected to the intended
one. This also makes the author of those commits (e.g. 32b4f1a4f07f
("pwm: jz4740: Another few conversions to regmap_{set,clear}_bits()"))
match the address used in the sign-off line.
Link: https://lkml.kernel.org/r/20250424060250.3085683-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
