summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-05-15clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate().Saravana Kannan
The clk_set_rate() code shouldn't check the clock's enable count when validating CLK_SET_RATE_GATE flag since the enable count could change after the validation. Similar to clk_set_parent(), it should instead check the prepare count. The prepare count should go to zero only when the end user expects the clock to not be enabled in the future. Since the code already grabs the prepare count before validation, it's not possible for prepare count to change after validation and by association not possible for a well behaving end user to enable the clock while the set rate is in progress. Signed-off-by: Saravana Kannan <skannan@codeaurora.org> Reviewed-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-15clk: Provide dummy clk_unregister()Mark Brown
While there's no actual implementation behind it having the call to use in drivers makes them feel neater from a driver author point of view. An actual implementation can wait for someone who needs to use the function in a real system. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> [mturquette@linaro.org: void return type instead of int -EINVAL] Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08ARM: Kirkwood: Replace clock gatingAndrew Lunn
Add a varient of the basic clk-gate code. This variant calls a function before gating the clock off. This function is used to disable the SATA or PCIe PHY. Now that all the drivers prepare and enable there clk as needed, there is no need for the common code to keep track of which clocks need gating on. Let the common clock framework turn off clocks which are not used. Buy using the added clk varient, when the clk framework turns off SATA or PCIe clocks, we also disabled SATA and PCIe PHYs which were not needed. The function kirkwood_pcie_id() can now be called outside of __init code, so remove this property for it, and functions it calls. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08ARM: Orion: Audio: Add clk/clkdev supportAndrew Lunn
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08ARM: Orion: PCIE: Add support for clkAndrew Lunn
Prepare and enable the clocks when the board indicates the pcie buses will be used. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08ARM: Orion: XOR: Add support for clkAndrew Lunn
Some orion platforms can gate the XOR driver clock. If the clock exisits, unable/disable it as appropriate. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08ARM: Orion: CESA: Add support for clkAndrew Lunn
Some orion platforms support gating of the clock. If the clock exists enable/disbale it as appropriate. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08ARM: Orion: SDIO: Add support for clk.Andrew Lunn
Some orion devices can gate the SDIO clock. If the clock exists, enable/disable it as appropriate. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08ARM: Orion: NAND: Add support for clk, if there is one.Andrew Lunn
Not all orion platforms can gate the clock, but if it does exist, enable/disable it as appropriate. v2: Fix the name of the clkdev entry. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08ARM: Orion: EHCI: Add support for enabling clocksAndrew Lunn
Not all platforms support gating the clock, so it is not an error if the clock does not exist. However, if it does exist, we should enable/disable it as appropriate. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08ARM: Orion: SATA: Add per channel clk/clkdev support.Andrew Lunn
The Orion kirkwood chips have a gatable clock per SATA channel. Add code to get and enable this clk if it exists. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08ARM: Orion: UART: Get the clock rate via clk_get_rate().Andrew Lunn
Let the machine pass to the platform which clock is used by the uart. Enable the clock and use clk_get_rate() to determine its rate. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08ARM: Orion: WDT: Add clk/clkdev supportAndrew Lunn
Remove tclk from platform data. This makes the platform data structure empty, so remove it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08ARM: Orion: Eth: Add clk/clkdev support.Andrew Lunn
The t_clk is moved from the shared part of the ethernet driver into the per port section. Each port can have its own gated clock, which it needs to enable/disable, as oppossed to there being one clock shared by all ports. In practice, only kirkwood supports this at the moment. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08ARM: Orion: SPI: Add clk/clkdev support.Andrew Lunn
Remove now redundant tclk from SPI platform data. This makes the platform data empty, so remove it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08ARM: Orion: Add clocks using the generic clk infrastructure.Andrew Lunn
Add tclk as a fixed rate clock for all platforms. In addition, on kirkwood, add a gated clock for most of the clocks which can be gated. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> [mturquette@linaro.org: removed redundant CLKDEV_LOOKUP from Kconfig] [mturquette@linaro.org: removed redundant clk.h from mach-dove/common.c] Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08clk: add a fixed factor clockSascha Hauer
Having fixed factors/dividers in hardware is a common pattern, so add a basic clock type doing this. It basically describes a fixed factor clock using a nominator and a denominator. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Viresh Kumar <viresh.kumar@st.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> [mturquette@linaro.org: constify parent_names in static init macro] [mturquette@linaro.org: copy/paste bug from mux in static init macro] [mturquette@linaro.org: fix error handling in clk_register_fixed_factor] [mturquette@linaro.org: improve division accuracy; thanks to Saravana] Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08clk: mux: assign init dataMike Turquette
The original conversion to struct clk_hw_init failed to add the pointer assignment in clk_register_mux. Signed-off-by: Mike Turquette <mturquette@linaro.org> Reported-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-08clk: remove COMMON_CLK_DISABLE_UNUSEDMike Turquette
Exposing this option generates confusion and incorrect behavior for single-image builds across platforms. Enable this behavior permanently. Signed-off-by: Mike Turquette <mturquette@linaro.org> Acked-by: Saravana Kannan <skannan@codeaurora.org>
2012-05-08clk: prevent spurious parent rate propagationMike Turquette
Patch 'clk: always pass parent_rate into .round_rate' made a subtle change to the semantics of .round_rate. It is now expected for the parent's rate to always be passed in, simplifying the implemenation of various .round_rate callback definitions. However the patch also introduced a bug in clk_calc_new_rates whereby a clock without the CLK_SET_RATE_PARENT flag set could still propagate a rate change up to a parent clock if the the .round_rate callback modified the &best_parent_rate value in any way. This patch fixes the issue at the framework level (in clk_calc_new_rates) by specifically handling the case where the CLK_SET_RATE_PARENT flag is not set. Signed-off-by: Mike Turquette <mturquette@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-06MAINTAINERS: add entry for common clk frameworkMike Turquette
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-01clk: clk_set_rate() must fail if CLK_SET_RATE_GATE is set and clk is enabledViresh Kumar
This is well documented but isn't implemented. clk_set_rate() must check if flags have CLK_SET_RATE_GATE bit set and is enabled too. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-01clk: Use a separate struct for holding init data.Saravana Kannan
Create a struct clk_init_data to hold all data that needs to be passed from the platfrom specific driver to the common clock framework during clock registration. Add a pointer to this struct inside clk_hw. This has several advantages: * Completely hides struct clk from many clock platform drivers and static clock initialization code that don't care for static initialization of the struct clks. * For platforms that want to do complete static initialization, it removed the need to directly mess with the struct clk's fields while still allowing to statically allocate struct clk. This keeps the code more future proof even if they include clk-private.h. * Simplifies the generic clk_register() function and allows adding optional fields in the future without modifying the function signature. * Simplifies the static initialization of clocks on all platforms by removing the need for forward delcarations or convoluted macros. Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [mturquette@linaro.org: kept DEFINE_CLK_* macros and __clk_init] Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Jamie Iles <jamie@jamieiles.com> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca>
2012-05-01clk: constify parent name arrays in macrosRajendra Nayak
parent name array is now expected to be const char *, make the relevent changes in the clk macros which define default clock types. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-24clk: remove trailing whitespace from clk.hRob Herring
Remove trailing whitespace from 2 lines. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-04-24clk: select CLKDEV_LOOKUP for COMMON_CLKRob Herring
Using the common clock infrastructure without the common clkdev code makes little sense, so select CLKDEV_LOOKUP for COMMON_CLK. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-04-24clk: Don't set clk->new_rate twiceViresh Kumar
if (!clk->ops->round_rate && (clk->flags & CLK_SET_RATE_PARENT)) is true, then we don't need to set clk->new_rate here, as we will call clk_calc_subtree() afterwards and it also sets clk->new_rate. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-24clk: clk-private: Add DEFINE_CLK macroViresh Kumar
All macros used for creating different kind of clocks have similar code for initializing struct clk. This patch removes those redundant lines and create another macro DEFINE_CLK. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-24clk: clk-gate: Create clk_gate_endisable()Viresh Kumar
This patch tries to remove duplicate code for clk_gate clocks. This creates another routine clk_gate_endisable() which will take care of enable/disable clock with knowledge of CLK_GATE_SET_TO_DISABLE flag. It works on following logic: For enabling clock, enable = 1 set2dis = 1 -> clear bit -> set = 0 set2dis = 0 -> set bit -> set = 1 For disabling clock, enable = 0 set2dis = 1 -> set bit -> set = 1 set2dis = 0 -> clear bit -> set = 0 So, result is always: enable xor set2dis. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-24clk: Fix typo in commentViresh Kumar
CLK_MUX_INDEX_BIT is mistakenly written as CLK_MUX_INDEX_BITWISE in comment. Fix it. CLK_GATE_SET_TO_DISABLE is mistakenly written as CLK_GATE_SET_DISABLE in comment. Fix it. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-24clk: propagate round_rate for CLK_SET_RATE_PARENT caseShawn Guo
Need to propagate round_rate call for the clk that has no .round_rate operation but with flag CLK_SET_RATE_PARENT set. For example, clk_mux is a clk with no .round_rate operation. However, it could likely be in a clk_set_rate propagation path, saying it has parent clk who has .round_rate and .set_rate operations. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-24clk: pass parent_rate into .set_rateShawn Guo
For most of .set_rate implementation, parent_rate will be used, so just like passing parent_rate into .recalc_rate, let's pass parent_rate into .set_rate too. It also updates the kernel doc for .set_rate ops. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-24clk: always pass parent_rate into .round_rateShawn Guo
The parent_rate will likely be used by most .round_rate implementation no matter whether flag CLK_SET_RATE_PARENT is set or not, so let's always pass parent_rate into .round_rate. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-24clk: basic: improve parent_names & return errorsMike Turquette
This patch is the basic clk version of 'clk: core: copy parent_names & return error codes'. The registration functions are changed to allow the core code to copy the array of strings and allow platforms to declare those arrays as __initdata. This patch also converts all of the basic clk registration functions to return error codes which better aligns them with the existing clk.h api. Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-24clk: core: copy parent_names & return error codesMike Turquette
This patch cleans up clk_register and solves a few bugs by teaching clk_register and __clk_init to return error codes (instead of just NULL) to better align with the existing clk.h api. Along with that change this patch also introduces a new behavior whereby clk_register copies the parent_names array, thus allowing platforms to declare their parent_names arrays as __initdata. Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-24clk: Constify parent name arraysMark Brown
Drivers should be able to declare their arrays of parent names as const so the APIs need to accept const arguments. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> [mturquette@linaro.org: constified gate] Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-24clk: Remove comment for end of CONFIG_COMMON_CLK sectionMark Brown
The comment is inaccurate (it actually ends the CONFIG_COMMON_CLK section, there's no else) and given that we've just got a single level of ifdef isn't really needed anyway. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-24clk: Make clk_get_rate() return 0 on errorRajendra Nayak
Most users of clk_get_rate() actually assume a non zero return value as a valid rate returned. Returing -EINVAL might confuse such users, so make it instead return zero on error. Besides the return value of clk_get_rate seems to be 'unsigned long'. Signed-off-by: Rajendra nayak <rnayak@ti.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-24clk: declare clk_ops of basic clks in clk-provider.hShawn Guo
Besides the static initialization, the clk_ops of basic clks could also be used by particular clk type being subclass of the basic clks. For example, clk_busy_divider has the same clk_ops as clk_divider, except it has to wait for a busy bit before return success with .set_rate. clk_busy_divider will somehow reuse clk_ops of clk_divider. Since clk-provider.h is included by clk-private.h, it's safe to move those clk_ops declaration of basic clks form clk-private.h into clk-provider.h, so that implementation of clks like clk_busy_divider above do not need to include clk-private.h to access those clk_ops. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-24clk: add "const" for clk_ops of basic clksShawn Guo
The clk_ops of basic clks should have "const" to match the definition in "struct clk" and clk_register prototype. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-24clk: remove unnecessary EXPORT_SYMBOL_GPLShawn Guo
It makes no sense to have EXPORT_SYMBOL_GPL on static functions. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-24clk: use kzalloc in clk_register_muxShawn Guo
Change clk_register_mux to use kzalloc, just like what all other basic clk registration functions do. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-24clk: core: enforce clk_ops consistencyMike Turquette
Documentation/clk.txt has some handsome ASCII art outlining which clk_ops are mandatory for a given clock, given the capability of the hardware. Enforce those mandates with sanity checks in __clk_init. Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-24clk: core: clk_calc_new_rates handles NULL parentsMike Turquette
It is possible to call clk_set_rate on a clock with a NULL parent. One such example is an adjustable-rate root clock. Ensure that clk_calc_new_rates does not dereference parent without checking first and also handle the corner cases gracefully. Reported-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-24clk: core: remove dead code pathsMike Turquette
Some static inline dummy functions were left over from before the clock core was consolidated from several C files down to one. Remove them. Reported-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-24clk: core: correct clk_set_rate kerneldocMike Turquette
Remove old and misleading documentation from the previous clk_set_rate implementaion. Reported-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-21Linux 3.4-rc4v3.4-rc4Linus Torvalds
2012-04-21sparc32,leon: add notify_cpu_starting()Yong Zhang
Otherwise cpu_active_mask will not set, which lead to other issue. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Signed-off-by: Konrad Eisele <konrad@gaisler.com> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull "ARM: SoC fixes" from Olof Johansson: * at91, ux500, imx, omap and bcmring: - at91 fixes for =m driver build issues, irqdomain fixes and config dependency fixes - ux500 kconfig dependency fixes and a smp wakeup bugfix - imx idle bugfix and build fix due to irq domain changes - omap uart pinmux fixes, softreset regression revert and misc fixes - bcmring build error regression fix * ux500 and imx had some small defconfig updates in this branch * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits) ARM: bcmring: fix UART declarations ARM: imx: Fix imx5 idle logic bug ARM: imx27-dt: Fix build due to removal of irq_domain_add_simple() ARM: imx_v4_v5_defconfig: Add support for CONFIG_REGULATOR_FIXED_VOLTAGE ARM: OMAP1: DMTIMER: fix broken timer clock source selection ARM: OMAP: serial: Fix the ocp smart idlemode handling bug ARM: OMAP2+: UART: Fix incorrect population of default uart pads ARM: OMAP: sram: fix BUG in dpll code for !PM case dmaengine: Kconfig: fix Atmel at_hdmac entry USB: gadget/at91_udc: add gpio_to_irq() function to vbus interrupt USB: ohci-at91: change annotations for probe/remove functions leds-atmel-pwm.c: Make pwmled_probe() __devinit ARM: at91: fix at91sam9261ek Ethernet dm9000 irq ARM: at91: fix rm9200ek flash size ARM: at91: remove empty at91_init_serial function ARM: at91: fix typo in at91_pmc_base assembly declaration ARM: at91: Export at91_matrix_base ARM: at91: Export at91_pmc_base ARM: at91: Export at91_ramc_base ARM: at91: Export at91_st_base ...
2012-04-21Merge tag 'mmc-fixes-for-3.4-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC fixes from Chris Ball: - Build fix for omap_hsmmc with OF against 3.4-rc1. - Fix CONFIG_MMC_UNSAFE_RESUME semantics regression against 3.3, which broke hotplug card detection when UNSAFE_RESUME is set. - Fix a race condition in omap_hsmmc with runtime PM. - Fix two libertas SDIO-powered-resume regressions. - Small fixes for discard/sanitize, dw_mmc, cd-gpio and esdhc-imx. * tag 'mmc-fixes-for-3.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: core: Do not pre-claim host in suspend mmc: dw_mmc: prevent NULL dereference for dma_ops mmc: unbreak sdhci-esdhc-imx on i.MX25 mmc: cd-gpio: Include header to pickup exported symbol prototypes mmc: sdhci: refine non-removable card checking for card detection mmc: dw_mmc: Fix switch from DMA to PIO mmc: remove MMC bus legacy suspend/resume method mmc: omap_hsmmc: Get rid of of_have_populated_dt() usage mmc: omap_hsmmc: build fix for CONFIG_OF=y and CONFIG_MMC_OMAP_HS=m mmc: fixes for eMMC v4.5 sanitize operation mmc: fixes for eMMC v4.5 discard operation
generated by cgit (git 2.34.1) at 2025-07-15 20:46:02 +0000