| Age | Commit message (Collapse) | Author |
|---|
|
Ondrej reports that certain SELinux tests are failing after commit
fc2a169c56de ("sunrpc: clean cache_detail immediately when flush is
written frequently"), merged during the v6.15 merge window.
Reported-by: Ondrej Mosnacek <omosnace@redhat.com>
Fixes: fc2a169c56de ("sunrpc: clean cache_detail immediately when flush is written frequently")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
A deadlock warning occurred when invoking nfs4_put_stid following a failed
dl_recall queue operation:
T1 T2
nfs4_laundromat
nfs4_get_client_reaplist
nfs4_anylock_blockers
__break_lease
spin_lock // ctx->flc_lock
spin_lock // clp->cl_lock
nfs4_lockowner_has_blockers
locks_owner_has_blockers
spin_lock // flctx->flc_lock
nfsd_break_deleg_cb
nfsd_break_one_deleg
nfs4_put_stid
refcount_dec_and_lock
spin_lock // clp->cl_lock
When a file is opened, an nfs4_delegation is allocated with sc_count
initialized to 1, and the file_lease holds a reference to the delegation.
The file_lease is then associated with the file through kernel_setlease.
The disassociation is performed in nfsd4_delegreturn via the following
call chain:
nfsd4_delegreturn --> destroy_delegation --> destroy_unhashed_deleg -->
nfs4_unlock_deleg_lease --> kernel_setlease --> generic_delete_lease
The corresponding sc_count reference will be released after this
disassociation.
Since nfsd_break_one_deleg executes while holding the flc_lock, the
disassociation process becomes blocked when attempting to acquire flc_lock
in generic_delete_lease. This means:
1) sc_count in nfsd_break_one_deleg will not be decremented to 0;
2) The nfs4_put_stid called by nfsd_break_one_deleg will not attempt to
acquire cl_lock;
3) Consequently, no deadlock condition is created.
Given that sc_count in nfsd_break_one_deleg remains non-zero, we can
safely perform refcount_dec on sc_count directly. This approach
effectively avoids triggering deadlock warnings.
Fixes: 230ca758453c ("nfsd: put dl_stid if fail to queue dl_recall")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
nfs.ko, nfsd.ko, and lockd.ko all use crc32_le(), which is available
only when CONFIG_CRC32 is enabled. But the only NFS kconfig option that
selected CONFIG_CRC32 was CONFIG_NFS_DEBUG, which is client-specific and
did not actually guard the use of crc32_le() even on the client.
The code worked around this bug by only actually calling crc32_le() when
CONFIG_CRC32 is built-in, instead hard-coding '0' in other cases. This
avoided randconfig build errors, and in real kernels the fallback code
was unlikely to be reached since CONFIG_CRC32 is 'default y'. But, this
really needs to just be done properly, especially now that I'm planning
to update CONFIG_CRC32 to not be 'default y'.
Therefore, make CONFIG_NFS_FS, CONFIG_NFSD, and CONFIG_LOCKD select
CONFIG_CRC32. Then remove the fallback code that becomes unnecessary,
as well as the selection of CONFIG_CRC32 from CONFIG_NFS_DEBUG.
Fixes: 1264a2f053a3 ("NFS: refactor code for calculating the crc32 hash of a filehandle")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
After three tries, we still see test failures with delegated
timestamps. Disable them by default, but leave the implementation
intact so that development can continue.
Cc: stable@vger.kernel.org # v6.14
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Bound nsm_local_state sysctl writings between SYSCTL_ZERO
and SYSCTL_INT_MAX.
The proc_handler has thus been updated to proc_dointvec_minmax.
Signed-off-by: Nicolas Bouchinet <nicolas.bouchinet@ssi.gouv.fr>
[ cel: updated to handle zero - UINT_MAX instead ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
If there are no courtesy clients then the return value from the
atomic_long_read() could overflow an int. Use a long to store the value
instead.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
idr_alloc_cyclic() is what guarantees that now, not this long-gone trick.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This isn't needed.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Move dl_type field above dl_time, which shaves 8 bytes off this struct.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
It's possible for rpc_call_async() to fail (mainly due to memory
allocation failure). If it does, there isn't much recourse other than to
requeue the callback and try again later.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Since there is now a cb_flags word, use a new NFSD4_CALLBACK_REQUEUE
flag in that instead of a separate boolean.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
These flags serve essentially the same purpose and get set and cleared
at the same time. Drop CB_GETATTR_BUSY and just use
NFSD4_CALLBACK_RUNNING instead.
For this to work, we must use clear_and_wake_up_bit(), but doing that on
for other types of callbacks is wasteful. Declare a new NFSD4_CALLBACK_WAKE
flag in cb_flags to indicate that wake_up is needed, and only set that
for CB_GETATTRs.
Also, make the wait use a TASK_UNINTERRUPTIBLE sleep. This is done in
the context of an nfsd thread, and it should never need to deal with
signals.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
deleg_reaper() will walk the client_lru list and put any suitable
entries onto "cblist" using the cl_ra_cblist pointer. It then walks the
objects outside the spinlock and queues callbacks for them.
None of the operations that deleg_reaper() does outside the
nn->client_lock are blocking operations. Just queue their workqueue jobs
under the nn->client_lock instead.
Also, the NFSD4_CLIENT_CB_RECALL_ANY and NFSD4_CALLBACK_RUNNING flags
serve an identical purpose now. Drop the NFSD4_CLIENT_CB_RECALL_ANY flag
and just use the one in the callback.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The nfsd4_callback workqueue jobs exist to queue backchannel RPCs to
rpciod. Because they run in different workqueue contexts, the rpc_task
can run concurrently with the workqueue job itself, should it become
requeued. This is problematic as there is no locking when accessing the
fields in the nfsd4_callback.
Add a new unsigned long to nfsd4_callback and declare a new
NFSD4_CALLBACK_RUNNING flag to be set in it. When attempting to run a
workqueue job, do a test_and_set_bit() on that flag first, and don't
queue the workqueue job if it returns true. Clear NFSD4_CALLBACK_RUNNING
in nfsd41_destroy_cb().
This also gives us a more reliable mechanism for handling queueing
failures in codepaths where we have to take references under spinlocks.
We can now do the test_and_set_bit on NFSD4_CALLBACK_RUNNING first, and
only take references to the objects if that returns false.
Most of the nfsd4_run_cb() callers are converted to use this new flag or
the nfsd4_try_run_cb() wrapper. The main exception is the callback
channel probe, which has its own synchronization.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
We do not and cannot support file locking with NFS reexport over
NFSv4.x for the same reason we don't do it for NFSv3: NFS reexport
server reboot cannot allow clients to recover locks because the source
NFS server has not rebooted, and so it is not in grace. Since the
source NFS server is not in grace, it cannot offer any guarantees that
the file won't have been changed between the locks getting lost and
any attempt to recover/reclaim them. The same applies to delegations
and any associated locks, so disallow them too.
Clients are no longer allowed to get file locks or delegations from a
reexport server, any attempts will fail with operation not supported.
Update the "Reboot recovery" section accordingly in
Documentation/filesystems/nfs/reexport.rst
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Under a high NFSv3 load with lots of different files being accessed,
the LRU list of garbage-collectable files can become quite long.
Asking list_lru_scan_node() to scan the whole list can result in a long
period during which a spinlock is held, blocking the addition of new LRU
items.
So ask list_lru_scan_node() to scan only a few entries at a time, and
repeat until the scan is complete.
If the shrinker runs between two consecutive calls of
list_lru_scan_node() it could invalidate the "remaining" counter which
could lead to premature freeing. So add a spinlock to avoid that.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
There is no need to remove a file from the lru every time we access it,
and then add it back. It is sufficient to set the REFERENCED flag every
time we put the file. The order in the lru of REFERENCED files is
largely irrelevant as they will all be moved to the end.
With this patch, files are added only when they are allocated (if
want_gc) and they are removed only by the list_lru_(shrink_)walk
callback or when forcibly removing a file.
This should reduce contention on the list_lru spinlock(s) and reduce
memory traffic a little.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The filecache lru is walked in 2 circumstances for 2 different reasons.
1/ When called from the shrinker we want to discard the first few
entries on the list, ignoring any with NFSD_FILE_REFERENCED set
because they should really be at the end of the LRU as they have been
referenced recently. So those ones are ROTATED.
2/ When called from the nfsd_file_gc() timer function we want to discard
anything that hasn't been used since before the previous call, and
mark everything else as unused at this point in time.
Using the same flag for both of these can result in some unexpected
outcomes. If the shrinker callback clears NFSD_FILE_REFERENCED then
nfsd_file_gc() will think the file hasn't been used in a while, while
really it has.
I think it is easier to reason about the behaviour if we instead have
two flags.
NFSD_FILE_REFERENCED means "this should be at the end of the LRU, please
put it there when convenient"
NFSD_FILE_RECENT means "this has been used recently - since the last
run of nfsd_file_gc()
When either caller finds an NFSD_FILE_REFERENCED entry, that entry
should be moved to the end of the LRU and the flag cleared. This can
safely happen at any time. The actual order on the lru might not be
strictly least-recently-used, but that is normal for linux lrus.
The shrinker callback can ignore the "recent" flag. If it ends up
freeing something that is "recent" that simply means that memory
pressure is sufficient to limit the acceptable cache age to less than
the nfsd_file_gc frequency.
The gc callback should primarily focus on NFSD_FILE_RECENT. It should
free everything that doesn't have this flag set, and should clear the
flag on everything else. When it clears the flag it is convenient to
clear the "REFERENCED" flag and move to the end of the LRU too.
With this, calls from the shrinker do not prematurely age files. It
will focus only on freeing those that are least recently used.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
list_lru_walk() is only useful when the aim is to remove all elements
from the list_lru. It will repeatedly visit rotated elements of the
first per-node sublist before proceeding to subsequent sublists.
This patch changes nfsd_file_gc() to use list_lru_walk_node() and
list_lru_count_node() on each NUMA node.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
nfsd_file_close_inode_sync() contains an exact copy of
nfsd_file_dispose_list().
This patch removes that copy and calls nfsd_file_dispose_list()
instead.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Dave opines:
IMO, there is no need to do this unnecessary work on every object
that is added to the LRU. Changing the gc worker to always run
every 2s and check if it has work to do like so:
static void
nfsd_file_gc_worker(struct work_struct *work)
{
- nfsd_file_gc();
- if (list_lru_count(&nfsd_file_lru))
- nfsd_file_schedule_laundrette();
+ if (list_lru_count(&nfsd_file_lru))
+ nfsd_file_gc();
+ nfsd_file_schedule_laundrette();
}
means that nfsd_file_gc() will be run the same way and have the same
behaviour as the current code. When the system it idle, it does a
list_lru_count() check every 2 seconds and goes back to sleep.
That's going to be pretty much unnoticable on most machines that run
NFS servers.
Suggested-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The race that this code tries to protect against is not interesting.
The code is problematic as we access the "nf" after we have given our
reference to the lru system. While that takes 2+ seconds to free
things, it is still poor form.
The only interesting race I can find would be with
nfsd_file_close_inode_sync();
This is the only place that really doesn't want the file to stay on the
LRU when unhashed (which is the direct consequence of the race).
However for the race to happen, some other thread must own a reference
to a file and be putting it while nfsd_file_close_inode_sync() is trying
to close all files for an inode. If this is possible, that other thread
could simply call nfsd_file_put() a little bit later and the result
would be the same: not all files are closed when
nfsd_file_close_inode_sync() completes.
If this was really a problem, we would need to wait in close_inode_sync
for the other references to be dropped. We probably don't want to do
that.
So it is best to simply remove this code.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
So, in order to avoid ending up with a flexible-array member in the
middle of other structs, we use the `struct_group_tagged()` helper
to create a new tagged `struct posix_acl_hdr`. This structure
groups together all the members of the flexible `struct posix_acl`
except the flexible array.
As a result, the array is effectively separated from the rest of the
members without modifying the memory layout of the flexible structure.
We then change the type of the middle struct member currently causing
trouble from `struct posix_acl` to `struct posix_acl_hdr`.
We also want to ensure that when new members need to be added to the
flexible structure, they are always included within the newly created
tagged struct. For this, we use `static_assert()`. This ensures that the
memory layout for both the flexible structure and the new tagged struct
is the same after any changes.
This approach avoids having to implement `struct posix_acl_hdr` as a
completely separate structure, thus preventing having to maintain two
independent but basically identical structures, closing the door to
potential bugs in the future.
We also use `container_of()` whenever we need to retrieve a pointer to
the flexible structure, through which we can access the flexible-array
member, if necessary.
So, with these changes, fix the following warning:
fs/nfs_common/nfsacl.c:45:26: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@oracle.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
fs/nfsd/nfs4callback.c implements a callback client. Thus its XDR
decoders are decoding replies, not calls.
NFS4ERR_BAD_XDR is an on-the-wire status code that reports that the
client sent a corrupted RPC /call/. It's not used as the internal
error code when a /reply/ can't be decoded, since that kind of
failure is never reported to the sender of that RPC message.
Instead, a reply decoder should return -EIO, as the reply decoders
in the NFS client do.
Fixes: 6487a13b5c6b ("NFSD: add support for CB_GETATTR callback")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
On a SEQ_MISORDERED error, the current code will reattempt the call, but
set the slot sequence ID to 1. I can find no mention of this remedy in
the spec, and it seems potentially dangerous. It's possible that the
last call was sent with seqid 1, and doing this will cause a
retransmission of the reply.
Drop this special handling, and always treat SEQ_MISORDERED like
BADSLOT. Retry the call, but leak the slot so that it is no longer used.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently it just restarts the call, without getting a new slot.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
ESERVERFAULT means that the server sent a successful and legitimate
reply, but the session info didn't match what was expected. Don't
increment the seq_nr in that case.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
nfsd4_cb_sequence_done() currently checks RPC_SIGNALLED() when
processing the compound and releasing the slot. If RPC_SIGNALLED()
returns true, then that means that the client is going to be torn down.
Don't check RPC_SIGNALLED() after processing a successful reply. Check
it only before restarting the rpc_task. If it returns true, then requeue
the callback instead of restarting the task.
Also, handle rpc_restart_call() and rpc_restart_call_prepare() failures
correctly, by requeueing the callback.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
If the callback is going to be requeued to the workqueue, then release
the slot. The callback client and session could change and the slot may
no longer be valid after that point.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
It's a bit strange to call nfsd4_cb_sequence_done() on a callback with no
CB_SEQUENCE. Lift the handling of restarting a call into a new helper,
and move the handling of NFSv4.0 into nfsd4_cb_done().
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
There is only one case where we want to proceed with processing the rest
of the CB_COMPOUND, and that's when the cb_seq_status is 0. Make the
default return value be false, and only set it to true in that case.
Rename the "need_restart" label to "requeue", to better indicate that
it's being requeued to the workqueue.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Before calling nfsd4_run_cb to queue dl_recall to the callback_wq, we
increment the reference count of dl_stid.
We expect that after the corresponding work_struct is processed, the
reference count of dl_stid will be decremented through the callback
function nfsd4_cb_recall_release.
However, if the call to nfsd4_run_cb fails, the incremented reference
count of dl_stid will not be decremented correspondingly, leading to the
following nfs4_stid leak:
unreferenced object 0xffff88812067b578 (size 344):
comm "nfsd", pid 2761, jiffies 4295044002 (age 5541.241s)
hex dump (first 32 bytes):
01 00 00 00 6b 6b 6b 6b b8 02 c0 e2 81 88 ff ff ....kkkk........
00 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 ad 4e ad de .kkkkkkk.....N..
backtrace:
kmem_cache_alloc+0x4b9/0x700
nfsd4_process_open1+0x34/0x300
nfsd4_open+0x2d1/0x9d0
nfsd4_proc_compound+0x7a2/0xe30
nfsd_dispatch+0x241/0x3e0
svc_process_common+0x5d3/0xcc0
svc_process+0x2a3/0x320
nfsd+0x180/0x2e0
kthread+0x199/0x1d0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
unreferenced object 0xffff8881499f4d28 (size 368):
comm "nfsd", pid 2761, jiffies 4295044005 (age 5541.239s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 30 4d 9f 49 81 88 ff ff ........0M.I....
30 4d 9f 49 81 88 ff ff 20 00 00 00 01 00 00 00 0M.I.... .......
backtrace:
kmem_cache_alloc+0x4b9/0x700
nfs4_alloc_stid+0x29/0x210
alloc_init_deleg+0x92/0x2e0
nfs4_set_delegation+0x284/0xc00
nfs4_open_delegation+0x216/0x3f0
nfsd4_process_open2+0x2b3/0xee0
nfsd4_open+0x770/0x9d0
nfsd4_proc_compound+0x7a2/0xe30
nfsd_dispatch+0x241/0x3e0
svc_process_common+0x5d3/0xcc0
svc_process+0x2a3/0x320
nfsd+0x180/0x2e0
kthread+0x199/0x1d0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
Fix it by checking the result of nfsd4_run_cb and call nfs4_put_stid if
fail to queue dl_recall.
Cc: stable@vger.kernel.org
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The pynfs DELEG8 test fails when run against nfsd. It acquires a
delegation and then lets the lease time out. It then tries to use the
deleg stateid and expects to see NFS4ERR_DELEG_REVOKED, but it gets
bad NFS4ERR_BAD_STATEID instead.
When a delegation is revoked, it's initially marked with
SC_STATUS_REVOKED, or SC_STATUS_ADMIN_REVOKED and later, it's marked
with the SC_STATUS_FREEABLE flag, which denotes that it is waiting for
s FREE_STATEID call.
nfs4_lookup_stateid() accepts a statusmask that includes the status
flags that a found stateid is allowed to have. Currently, that mask
never includes SC_STATUS_FREEABLE, which means that revoked delegations
are (almost) never found.
Add SC_STATUS_FREEABLE to the always-allowed status flags, and remove it
from nfsd4_delegreturn() since it's now always implied.
Fixes: 8dd91e8d31fe ("nfsd: fix race between laundromat and free_stateid")
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
On an rdma-capable machine, a start/stop/start and then on a stop of
a knfsd server would lead kref underflow warning because svc_rdma_free
would indiscriminately unregister the rdma device but a listening
transport never calls the rdma_rn_register() thus leading to kref
going down to 0 on the 1st stop of the server and on the 2nd stop
it leads to a problem.
Suggested-by: Chuck Lever <chuck.lever@oracle.com>
Fixes: c4de97f7c454 ("svcrdma: Handle device removal outside of the CM event handler")
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently, nfsd_proc_stat_init() ignores the return value of
svc_proc_register(). If the procfile creation fails, then the kernel
will WARN when it tries to remove the entry later.
Fix nfsd_proc_stat_init() to return the same type of pointer as
svc_proc_register(), and fix up nfsd_net_init() to check that and fail
the nfsd_net construction if it occurs.
svc_proc_register() can fail if the dentry can't be allocated, or if an
identical dentry already exists. The second case is pretty unlikely in
the nfsd_net construction codepath, so if this happens, return -ENOMEM.
Reported-by: syzbot+e34ad04f27991521104c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-nfs/67a47501.050a0220.19061f.05f9.GAE@google.com/
Cc: stable@vger.kernel.org # v6.9
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
While running down the problem triggered by disconnect injection,
I noticed the "in use" string was actually never hooked up in this
trace point, so it always showed the traced slot as not in use. But
what might be more useful is showing all the slot status flags.
Also, this trace point can record and report the slot's index
number, which among other things is useful for troubleshooting slot
table expansion and contraction.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Commit ec596aaf9b48 ("SUNRPC: Remove code behind
CONFIG_RPCSEC_GSS_KRB5_SIMPLIFIED") was the last user of the
make_checksum() function.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
RFC 8881 Section 18.9.4 paragraphs 1 - 2 tell us that RENAME should
return NFS4ERR_FILE_OPEN only when the target object is a file that
is currently open. If the target is a directory, some other status
must be returned.
The VFS is unlikely to return -EBUSY, but NFSD has to ensure that
errno does not leak to clients as a status code that is not
permitted by spec.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
RFC 8881 Section 18.26.4 paragraphs 1 - 3 tell us that RENAME should
return NFS4ERR_FILE_OPEN only when the target object is a file that
is currently open. If the target is a directory, some other status
must be returned.
Generally I expect that a delegation recall will be triggered in
some of these circumstances. In other cases, the VFS might return
-EBUSY for other reasons, and NFSD has to ensure that errno does
not leak to clients as a status code that is not permitted by spec.
There are some error flows where the target dentry hasn't been
found yet. The default value for @type therefore is S_IFDIR to return
an alternate status code in those cases.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
RFC 8881 Section 18.25.4 paragraph 5 tells us that the server
should return NFS4ERR_FILE_OPEN only if the target object is an
opened file. This suggests that returning this status when removing
a directory will confuse NFS clients.
This is a version-specific issue; nfsd_proc_remove/rmdir() and
nfsd3_proc_remove/rmdir() already return nfserr_access as
appropriate.
Unfortunately there is no quick way for nfsd4_remove() to determine
whether the target object is a file or not, so the check is done in
in nfsd_unlink() for now.
Reported-by: Trond Myklebust <trondmy@hammerspace.com>
Fixes: 466e16f0920f ("nfsd: check for EBUSY from vfs_rmdir/vfs_unink.")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
If fh_fill_pre_attrs() returns a non-zero status, the error flow
takes it through out_unlock, which then overwrites the returned
status code with
err = nfserrno(host_err);
Fixes: a332018a91c4 ("nfsd: handle failure to collect pre/post-op attrs more sanely")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
There two mappings of nfserr_mlink in nfs_errtbl.
Remove one of them.
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
NFSD sends CB_RECALL_ANY to clients when the server is low on
memory or that client has a large number of delegations outstanding.
We've seen cases where NFSD attempts to send CB_RECALL_ANY requests
to disconnected clients, and gets confused. These calls never go
anywhere if a backchannel transport to the target client isn't
available. Before the server can send any backchannel operation, the
client has to connect first and then do a BIND_CONN_TO_SESSION.
This patch doesn't address the root cause of the confusion, but
there's no need to queue up these optional operations if they can't
go anywhere.
Fixes: 44df6f439a17 ("NFSD: add delegation reaper to react to low memory condition")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
A WARN_ON_ONCE() is added to revoke delegations to make sure that the
state has been marked for revocation. However, that's only true for 4.1+
stateids. For 4.0 stateids, in unhash_delegation_locked() the sc_status
is set to SC_STATUS_CLOSED. Modify the check to reflect it, otherwise
a WARN_ON_ONCE is erronously triggered.
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently, when no active threads are running, a root user using nfsdctl
command can try to remove a particular listener from the list of previously
added ones, then start the server by increasing the number of threads,
it leads to the following problem:
[ 158.835354] refcount_t: addition on 0; use-after-free.
[ 158.835603] WARNING: CPU: 2 PID: 9145 at lib/refcount.c:25 refcount_warn_saturate+0x160/0x1a0
[ 158.836017] Modules linked in: rpcrdma rdma_cm iw_cm ib_cm ib_core nfsd auth_rpcgss nfs_acl lockd grace overlay isofs uinput snd_seq_dummy snd_hrtimer nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 rfkill ip_set nf_tables qrtr sunrpc vfat fat uvcvideo videobuf2_vmalloc videobuf2_memops uvc videobuf2_v4l2 videodev videobuf2_common snd_hda_codec_generic mc e1000e snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore sg loop dm_multipath dm_mod nfnetlink vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vmw_vmci vsock xfs libcrc32c crct10dif_ce ghash_ce vmwgfx sha2_ce sha256_arm64 sr_mod sha1_ce cdrom nvme drm_client_lib drm_ttm_helper ttm nvme_core drm_kms_helper nvme_auth drm fuse
[ 158.840093] CPU: 2 UID: 0 PID: 9145 Comm: nfsd Kdump: loaded Tainted: G B W 6.13.0-rc6+ #7
[ 158.840624] Tainted: [B]=BAD_PAGE, [W]=WARN
[ 158.840802] Hardware name: VMware, Inc. VMware20,1/VBSA, BIOS VMW201.00V.24006586.BA64.2406042154 06/04/2024
[ 158.841220] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 158.841563] pc : refcount_warn_saturate+0x160/0x1a0
[ 158.841780] lr : refcount_warn_saturate+0x160/0x1a0
[ 158.842000] sp : ffff800089be7d80
[ 158.842147] x29: ffff800089be7d80 x28: ffff00008e68c148 x27: ffff00008e68c148
[ 158.842492] x26: ffff0002e3b5c000 x25: ffff600011cd1829 x24: ffff00008653c010
[ 158.842832] x23: ffff00008653c000 x22: 1fffe00011cd1829 x21: ffff00008653c028
[ 158.843175] x20: 0000000000000002 x19: ffff00008653c010 x18: 0000000000000000
[ 158.843505] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 158.843836] x14: 0000000000000000 x13: 0000000000000001 x12: ffff600050a26493
[ 158.844143] x11: 1fffe00050a26492 x10: ffff600050a26492 x9 : dfff800000000000
[ 158.844475] x8 : 00009fffaf5d9b6e x7 : ffff000285132493 x6 : 0000000000000001
[ 158.844823] x5 : ffff000285132490 x4 : ffff600050a26493 x3 : ffff8000805e72bc
[ 158.845174] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000098588000
[ 158.845528] Call trace:
[ 158.845658] refcount_warn_saturate+0x160/0x1a0 (P)
[ 158.845894] svc_recv+0x58c/0x680 [sunrpc]
[ 158.846183] nfsd+0x1fc/0x348 [nfsd]
[ 158.846390] kthread+0x274/0x2f8
[ 158.846546] ret_from_fork+0x10/0x20
[ 158.846714] ---[ end trace 0000000000000000 ]---
nfsd_nl_listener_set_doit() would manipulate the list of transports of
server's sv_permsocks and close the specified listener but the other
list of transports (server's sp_xprts list) would not be changed leading
to the problem above.
Instead, determined if the nfsdctl is trying to remove a listener, in
which case, delete all the existing listener transports and re-create
all-but-the-removed ones.
Fixes: 16a471177496 ("NFSD: add listener-{set,get} netlink command")
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The last use of krb5_decrypt() was removed in 2023 by
commit 2a9893f796a3 ("SUNRPC:
Remove net/sunrpc/auth_gss/gss_krb5_seqnum.c")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The legacy rpc.nfsd tool will set the nlm_grace_period if the NFSv4
grace period is set. nfsdctl is missing this functionality, so add a new
netlink control interface for lockd that it can use. For now, it only
allows setting the grace period, and the tcp and udp listener ports.
lockd currently uses module parameters and sysctls for configuration, so
all of its settings are global. With this change, lockd now tracks these
values on a per-net-ns basis. It will only fall back to using the global
values if any of them are 0.
Finally, as a backward compatibility measure, if updating the nlm
settings in the init_net namespace, also update the legacy global
values to match.
Link: https://issues.redhat.com/browse/RHEL-71698
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
We will write /proc/net/rpc/xxx/flush if we want to clean cache_detail.
This updates nextcheck to the current time and calls cache_flush -->
cache_clean to clean cache_detail.
If we write this interface again within one second, it will only increase
flush_time and nextcheck without actually cleaning cache_detail.
Therefore, if we keep writing this interface repeatedly within one second,
flush_time and nextcheck will keep increasing, even far exceeding the
current time, making it impossible to clear cache_detail through the flush
interface or cache_cleaner.
If someone frequently calls the flush interface, we should immediately
clean the corresponding cache_detail instead of continuously accumulating
nextcheck.
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Use the specified $(LD) when building userprogs with Clang
- Pass the correct target triple when compile-testing UAPI headers
with Clang
- Fix pacman-pkg build error with KBUILD_OUTPUT
* tag 'kbuild-fixes-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: install-extmod-build: Fix build when specifying KBUILD_OUTPUT
docs: Kconfig: fix defconfig description
kbuild: hdrcheck: fix cross build with clang
kbuild: userprogs: use correct lld when linking through clang
|
