| Age | Commit message (Collapse) | Author |
|---|
|
Doing this probing inside of the Makefiles means we have a maze of
ifdefs inside the source code and child Makefiles that need to make
proper decisions on this too. Instead, we do it at Kconfig time, like
many other compiler and assembler options, which allows us to set up the
dependencies normally for full compilation units. In the process, the
ADX test changes to use %eax instead of %r10 so that it's valid in both
32-bit and 64-bit mode.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
CONFIG_AS_MOVNTDQA was introduced by commit 0b1de5d58e19 ("drm/i915:
Use SSE4.1 movntdqa to accelerate reads from WC memory").
We raise the minimal supported binutils version from time to time.
The last bump was commit 1fb12b35e5ff ("kbuild: Raise the minimum
required binutils version to 2.21").
I confirmed the code in $(call as-instr,...) can be assembled by the
binutils 2.21 assembler and also by LLVM integrated assembler.
Remove CONFIG_AS_MOVNTDQA, which is always defined.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
CONFIG_AS_AVX was introduced by commit ea4d26ae24e5 ("raid5: add AVX
optimized RAID5 checksumming").
We raise the minimal supported binutils version from time to time.
The last bump was commit 1fb12b35e5ff ("kbuild: Raise the minimum
required binutils version to 2.21").
I confirmed the code in $(call as-instr,...) can be assembled by the
binutils 2.21 assembler and also by LLVM integrated assembler.
Remove CONFIG_AS_AVX, which is always defined.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
|
|
CONFIG_AS_SSSE3 was introduced by commit 75aaf4c3e6a4 ("x86/raid6:
correctly check for assembler capabilities").
We raise the minimal supported binutils version from time to time.
The last bump was commit 1fb12b35e5ff ("kbuild: Raise the minimum
required binutils version to 2.21").
I confirmed the code in $(call as-instr,...) can be assembled by the
binutils 2.21 assembler and also by LLVM integrated assembler.
Remove CONFIG_AS_SSSE3, which is always defined.
I added ifdef CONFIG_X86 to lib/raid6/algos.c to avoid link errors
on non-x86 architectures.
lib/raid6/algos.c is built not only for the kernel but also for
testing the library code from userspace. I added -DCONFIG_X86 to
lib/raid6/test/Makefile to cator to this usecase.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
|
|
CONFIG_AS_CFI_SECTIONS was introduced by commit 9e565292270a ("x86:
Use .cfi_sections for assembly code").
We raise the minimal supported binutils version from time to time.
The last bump was commit 1fb12b35e5ff ("kbuild: Raise the minimum
required binutils version to 2.21").
I confirmed the code in $(call as-instr,...) can be assembled by the
binutils 2.21 assembler and also by LLVM integrated assembler.
Remove CONFIG_AS_CFI_SECTIONS, which is always defined.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
|
|
Commit 131484c8da97 ("x86/debug: Remove perpetually broken,
unmaintainable dwarf annotations") removes all the users of
CFI_SIGNAL_FRAME.
Remove the CFI_SIGNAL_FRAME and CONFIG_AS_CFI_SIGNAL_FRAME.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
|
|
CONFIG_AS_CFI was introduced by commit e2414910f212 ("[PATCH] x86:
Detect CFI support in the assembler at runtime"), and extended by
commit f0f12d85af85 ("x86_64: Check for .cfi_rel_offset in CFI probe").
We raise the minimal supported binutils version from time to time.
The last bump was commit 1fb12b35e5ff ("kbuild: Raise the minimum
required binutils version to 2.21").
I confirmed the code in $(call as-instr,...) can be assembled by the
binutils 2.21 assembler and also by LLVM integrated assembler.
Remove CONFIG_AS_CFI, which is always defined.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
|
|
This header file has the following check at the top:
#ifndef __ASSEMBLY__
#warning "asm/dwarf2.h should be only included in pure assembly files"
#endif
So, we expect defined(__ASSEMBLY__) is always true.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
|
|
You can build a user-space test program for the raid6 library code,
like this:
$ cd lib/raid6/test
$ make
The command in $(shell ...) function is evaluated by /bin/sh by default.
(or, you can specify the shell by passing SHELL=<shell> from command line)
Currently '>&/dev/null' is used to sink both stdout and stderr. Because
this code is bash-ism, it only works when /bin/sh is a symbolic link to
bash (this is the case on RHEL etc.)
This does not work on Ubuntu where /bin/sh is a symbolic link to dash.
I see lots of
/bin/sh: 1: Syntax error: Bad fd number
and
warning "your version of binutils lacks ... support"
Replace it with portable '>/dev/null 2>&1'.
Fixes: 4f8c55c5ad49 ("lib/raid6: build proper files on corresponding arch")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
These are listed in include/uapi/asm-generic/Kbuild, so Kbuild will
automatically generate them.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
These types should be defined in posix_types.h, not in bitsperlong.h .
With these defines moved, h8300-specific bitsperlong.h is no longer
needed since Kbuild will automatically create a wrapper of
include/uapi/asm-generic/bitsperlong.h
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
__builtin_constant_p(nr) is used everywhere now. It does not make
much sense to define IS_IMMEDIATE() as its alias.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Pull NVMe fixes from Christoph.
* 'nvme-5.7' of git://git.infradead.org/nvme:
nvmet-rdma: fix double free of rdma queue
nvme-fc: Revert "add module to ops template to allow module references"
nvme: fix deadlock caused by ANA update wrong locking
nvmet-rdma: fix bonding failover possible NULL deref
nvmet: fix NULL dereference when removing a referral
nvme: inherit stable pages constraint in the mpath stack device
nvme-tcp: fix possible crash in recv error flow
nvme-tcp: don't poll a non-live queue
nvme-tcp: fix possible crash in write_zeroes processing
nvmet-fc: fix typo in comment
nvme-rdma: Replace comma with a semicolon
nvme-fcloop: fix deallocation of working context
nvme: fix compat address handling in several ioctls
|
|
The recent AMD platform exposes an HD-audio bus but without any actual
codecs, which is internally tied with a USB-audio device, supposedly.
It results in "no codecs" error of HD-audio bus driver, and it's
nothing but a waste of resources.
This patch introduces a static blacklist table for skipping such a
known bogus PCI SSID entry. As of writing this patch, the known SSIDs
are:
* 1043:874f - ASUS ROG Zenith II / Strix
* 1462:cb59 - MSI TRX40 Creator
* 1462:cb60 - MSI TRX40
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206543
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200408140449.22319-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Some recent boards (supposedly with a new AMD platform) contain the
USB audio class 2 device that is often tied with HD-audio. The device
exposes an Input Gain Pad control (id=19, control=12) but this node
doesn't behave correctly, returning an error for each inquiry of
GET_MIN and GET_MAX that should have been mandatory.
As a workaround, simply ignore this node by adding a usbmix_name_map
table entry. The currently known devices are:
* 0414:a002 - Gigabyte TRX40 Aorus Pro WiFi
* 0b05:1916 - ASUS ROG Zenith II
* 0b05:1917 - ASUS ROG Strix
* 0db0:0d64 - MSI TRX40 Creator
* 0db0:543d - MSI TRX40
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206543
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200408140449.22319-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
MSI GL63 laptop requires the similar quirk like other MSI models,
ALC1220_FIXUP_CLEVO_P950. The board BIOS doesn't provide a PCI SSID
for the device, hence we need to take the codec SSID (1462:1275)
instead.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207157
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200408135645.21896-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Christoph Hellwig noticed that we were doing some unnecessary
work in orangefs_flush:
orangefs_flush just writes out data on every close(2) call. There is
no need to change anything about the dirty state, especially as
orangefs doesn't treat I_DIRTY_TIMES special in any way. The code
seems to come from partially open coding vfs_fsync.
He sent in a patch with the above commit message and also a
patch that was a reversion of another Orangefs patch I had
sent upstream a while ago. I had to fix his reversion patch
so that it would compile which caused his "don't mess with
I_DIRTY_TIMES" patch to fail to apply. So here I have just
remade his patch and applied it after the fixed reversion patch.
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
|
|
Christoph Hellwig sent in a reversion of "orangefs: remember count
when reading." because:
->read_iter calls can race with each other and one or
more ->flush calls. Remove the the scheme to store the read
count in the file private data as is is completely racy and
can cause use after free or double free conditions
Christoph's reversion caused Orangefs not to work or to compile. I
added a patch that fixed that, but intel's kbuild test robot pointed
out that sending Christoph's patch followed by my patch upstream, it
would break bisection because of the failure to compile. So I have
combined the reversion plus my patch... here's the commit message
that was in my patch:
Logically, optimal Orangefs "pages" are 4 megabytes. Reading
large Orangefs files 4096 bytes at a time is like trying to
kick a dead whale down the beach. Before Christoph's "Revert
orangefs: remember count when reading." I tried to give users
a knob whereby they could, for example, use "count" in
read(2) or bs with dd(1) to get whatever they considered an
appropriate amount of bytes at a time from Orangefs and fill
as many page cache pages as they could at once.
Without the racy code that Christoph reverted Orangefs won't
even compile, much less work. So this replaces the logic that
used the private file data that Christoph reverted with
a static number of bytes to read from Orangefs.
I ran tests like the following to determine what a
reasonable static number of bytes might be:
dd if=/pvfsmnt/asdf of=/dev/null count=128 bs=4194304
dd if=/pvfsmnt/asdf of=/dev/null count=256 bs=2097152
dd if=/pvfsmnt/asdf of=/dev/null count=512 bs=1048576
.
.
.
dd if=/pvfsmnt/asdf of=/dev/null count=4194304 bs=128
Reads seem faster using the static number, so my "knob code"
wasn't just racy, it wasn't even a good idea...
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Reported-by: kbuild test robot <lkp@intel.com>
|
|
Fix a spelling typo in cpuidle-haltpoll.c.
Signed-off-by: Yihao Wu <wuyihao@linux.alibaba.com>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Fix the following sparse warning:
arch/x86/kernel/acpi/boot.c:48:5: warning: symbol 'acpi_nobgrt' was not
declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Fixe the alignment in the ACPI block diagram (RST table)
by adding missing spaces
Signed-off-by: Vilhelm Prytz <vilhelm@prytznet.se>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The 'invalid wait context' splat doesn't print all the information
required to reconstruct / validate the error, specifically the
irq-context state is missing.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Document the circumstances under which refcount_t's saturation mechanism
works deterministically.
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200303105427.260620-1-jannh@google.com
|
|
The following commit:
7f26482a872c ("locking/percpu-rwsem: Remove the embedded rwsem")
introduced task_struct memory leaks due to messing up the task_struct
refcount.
At the beginning of percpu_rwsem_wake_function(), it calls get_task_struct(),
but if the trylock failed, it will remain in the waitqueue. However, it
will run percpu_rwsem_wake_function() again with get_task_struct() to
increase the refcount but then only call put_task_struct() once the trylock
succeeded.
Fix it by adjusting percpu_rwsem_wake_function() a bit to guard against
when percpu_rwsem_wait() observing !private, terminating the wait and
doing a quick exit() while percpu_rwsem_wake_function() then doing
wake_up_process(p) as a use-after-free.
Fixes: 7f26482a872c ("locking/percpu-rwsem: Remove the embedded rwsem")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200330213002.2374-1-cai@lca.pw
|
|
Requested and effective uclamp values can be a bit tricky to decipher when
playing with cgroup hierarchies. Add them to a task's procfs when
SCHED_DEBUG is enabled.
Reviewed-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200226124543.31986-4-valentin.schneider@arm.com
|
|
The printing macros in debug.c keep redefining the same output
format. Collect each output format in a single definition, and reuse that
definition in the other macros. While at it, add a layer of parentheses and
replace printf's with the newly introduced macros.
Reviewed-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200226124543.31986-3-valentin.schneider@arm.com
|
|
Most printing macros for procfs are defined globally in debug.c, and they
are re-defined (to the exact same thing) within proc_sched_show_task().
Get rid of the duplicate defines.
Reviewed-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200226124543.31986-2-valentin.schneider@arm.com
|
|
The following commit:
5e83eafbfd3b ("sched/fair: Remove the rq->cpu_load[] update code")
eliminated the last use case for rq->last_load_update_tick, so remove
the field as well.
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/1584710495-308969-1-git-send-email-vincent.donnefort@arm.com
|
|
The kernel test robot triggered a warning with the following race:
task-ctx A interrupt-ctx B
worker
-> process_one_work()
-> work_item()
-> schedule();
-> sched_submit_work()
-> wq_worker_sleeping()
-> ->sleeping = 1
atomic_dec_and_test(nr_running)
__schedule(); *interrupt*
async_page_fault()
-> local_irq_enable();
-> schedule();
-> sched_submit_work()
-> wq_worker_sleeping()
-> if (WARN_ON(->sleeping)) return
-> __schedule()
-> sched_update_worker()
-> wq_worker_running()
-> atomic_inc(nr_running);
-> ->sleeping = 0;
-> sched_update_worker()
-> wq_worker_running()
if (!->sleeping) return
In this context the warning is pointless everything is fine.
An interrupt before wq_worker_sleeping() will perform the ->sleeping
assignment (0 -> 1 > 0) twice.
An interrupt after wq_worker_sleeping() will trigger the warning and
nr_running will be decremented (by A) and incremented once (only by B, A
will skip it). This is the case until the ->sleeping is zeroed again in
wq_worker_running().
Remove the WARN statement because this condition may happen. Document
that preemption around wq_worker_sleeping() needs to be disabled to
protect ->sleeping and not just as an optimisation.
Fixes: 6d25be5782e48 ("sched/core, workqueues: Distangle worker accounting from rq lock")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: https://lkml.kernel.org/r/20200327074308.GY11705@shao2-debian
|
|
A negative imbalance value was observed after imbalance calculation,
this happens when the local sched group type is group_fully_busy,
and the average load of local group is greater than the selected
busiest group. Fix this problem by comparing the average load of the
local and busiest group before imbalance calculation formula.
Suggested-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Aubrey Li <aubrey.li@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/1585201349-70192-1-git-send-email-aubrey.li@intel.com
|
|
Currently, there is a potential race between distribute_cfs_runtime()
and assign_cfs_rq_runtime(). Race happens when cfs_b->runtime is read,
distributes without holding lock and finds out there is not enough
runtime to charge against after distribution. Because
assign_cfs_rq_runtime() might be called during distribution, and use
cfs_b->runtime at the same time.
Fibtest is the tool to test this race. Assume all gcfs_rq is throttled
and cfs period timer runs, slow threads might run and sleep, returning
unused cfs_rq runtime and keeping min_cfs_rq_runtime in their local
pool. If all this happens sufficiently quickly, cfs_b->runtime will drop
a lot. If runtime distributed is large too, over-use of runtime happens.
A runtime over-using by about 70 percent of quota is seen when we
test fibtest on a 96-core machine. We run fibtest with 1 fast thread and
95 slow threads in test group, configure 10ms quota for this group and
see the CPU usage of fibtest is 17.0%, which is far more than the
expected 10%.
On a smaller machine with 32 cores, we also run fibtest with 96
threads. CPU usage is more than 12%, which is also more than expected
10%. This shows that on similar workloads, this race do affect CPU
bandwidth control.
Solve this by holding lock inside distribute_cfs_runtime().
Fixes: c06f04c70489 ("sched: Fix potential near-infinite distribute_cfs_runtime() loop")
Reviewed-by: Ben Segall <bsegall@google.com>
Signed-off-by: Huaixin Chang <changhuaixin@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/lkml/20200325092602.22471-1-changhuaixin@linux.alibaba.com/
|
|
sched/core.c uses update_avg() for rq->avg_idle and sched/fair.c uses an
open-coded version (with the exact same decay factor) for
rq->avg_scan_cost. On top of that, select_idle_cpu() expects to be able to
compare these two fields.
The only difference between the two is that rq->avg_scan_cost is computed
using a pure division rather than a shift. Turns out it actually matters,
first of all because the shifted value can be negative, and the standard
has this to say about it:
"""
The result of E1 >> E2 is E1 right-shifted E2 bit positions. [...] If E1
has a signed type and a negative value, the resulting value is
implementation-defined.
"""
Not only this, but (arithmetic) right shifting a negative value (using 2's
complement) is *not* equivalent to dividing it by the corresponding power
of 2. Let's look at a few examples:
-4 -> 0xF..FC
-4 >> 3 -> 0xF..FF == -1 != -4 / 8
-8 -> 0xF..F8
-8 >> 3 -> 0xF..FF == -1 == -8 / 8
-9 -> 0xF..F7
-9 >> 3 -> 0xF..FE == -2 != -9 / 8
Make update_avg() use a division, and export it to the private scheduler
header to reuse it where relevant. Note that this still lets compilers use
a shift here, but should prevent any unwanted surprise. The disassembly of
select_idle_cpu() remains unchanged on arm64, and ttwu_do_wakeup() gains 2
instructions; the diff sort of looks like this:
- sub x1, x1, x0
+ subs x1, x1, x0 // set condition codes
+ add x0, x1, #0x7
+ csel x0, x0, x1, mi // x0 = x1 < 0 ? x0 : x1
add x0, x3, x0, asr #3
which does the right thing (i.e. gives us the expected result while still
using an arithmetic shift)
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200330090127.16294-1-valentin.schneider@arm.com
|
|
We hit following warning when running tests on kernel
compiled with CONFIG_DEBUG_ATOMIC_SLEEP=y:
WARNING: CPU: 19 PID: 4472 at mm/gup.c:2381 __get_user_pages_fast+0x1a4/0x200
CPU: 19 PID: 4472 Comm: dummy Not tainted 5.6.0-rc6+ #3
RIP: 0010:__get_user_pages_fast+0x1a4/0x200
...
Call Trace:
perf_prepare_sample+0xff1/0x1d90
perf_event_output_forward+0xe8/0x210
__perf_event_overflow+0x11a/0x310
__intel_pmu_pebs_event+0x657/0x850
intel_pmu_drain_pebs_nhm+0x7de/0x11d0
handle_pmi_common+0x1b2/0x650
intel_pmu_handle_irq+0x17b/0x370
perf_event_nmi_handler+0x40/0x60
nmi_handle+0x192/0x590
default_do_nmi+0x6d/0x150
do_nmi+0x2f9/0x3c0
nmi+0x8e/0xd7
While __get_user_pages_fast() is IRQ-safe, it calls access_ok(),
which warns on:
WARN_ON_ONCE(!in_task() && !pagefault_disabled())
Peter suggested disabling page faults around __get_user_pages_fast(),
which gets rid of the warning in access_ok() call.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200407141427.3184722-1-jolsa@kernel.org
|
|
The uncore subsystem in Ice Lake server is similar to previous server.
There are some differences in config register encoding and pci device
IDs. The uncore PMON units in Ice Lake server include Ubox, Chabox, IIO,
IRP, M2PCIE, PCU, M2M, PCIE3 and IMC.
- For CHA, filter 1 register has been removed. The filter 0 register can
be used by and of CHA events to be filterd by Thread/Core-ID. To do
so, the control register's tid_en bit must be set to 1.
- For IIO, there are some changes on event constraints. The MSR address
and MSR offsets among counters are also changed.
- For IRP, the MSR address and MSR offsets among counters are changed.
- For M2PCIE, the counters are accessed by MSR now. Add new MSR address
and MSR offsets. Change event constraints.
- To determine the number of CHAs, have to read CAPID6(Low) and CAPID7
(High) now.
- For M2M, update the PCICFG address and Device ID.
- For UPI, update the PCICFG address, Device ID and counter address.
- For M3UPI, update the PCICFG address, Device ID, counter address and
event constraints.
- For IMC, update the formular to calculate MMIO BAR address, which is
MMIO_BASE + specific MEM_BAR offset.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/1585842411-150452-1-git-send-email-kan.liang@linux.intel.com
|
|
The void* in perf_less_group_idx() is to a member in the array which points
at a perf_event*, as such it is a perf_event**.
Reported-By: John Sperbeck <jsperbeck@google.com>
Fixes: 6eef8a7116de ("perf/core: Use min_heap in visit_groups_merge()")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200321164331.107337-1-irogers@google.com
|
|
Song reports that installing cgroup events is broken since:
db0503e4f675 ("perf/core: Optimize perf_install_in_event()")
The problem being that cgroup events try to track cpuctx->cgrp even
for disabled events, which is pointless and actively harmful since the
above commit. Rework the code to have explicit enable/disable hooks
for cgroup events, such that we can limit cgroup tracking to active
events.
More specifically, since the above commit disabled events are no
longer added to their context from the 'right' CPU, and we can't
access things like the current cgroup for a remote CPU.
Cc: <stable@vger.kernel.org> # v5.5+
Fixes: db0503e4f675 ("perf/core: Optimize perf_install_in_event()")
Reported-by: Song Liu <songliubraving@fb.com>
Tested-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200318193337.GB20760@hirez.programming.kicks-ass.net
|
|
Fix the following sparse warning:
arch/x86/xen/setup.c:998:12: warning: symbol 'xen_pvmmu_arch_setup' was not
declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20200408024605.42394-1-yanaijie@huawei.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Pull drm fixes from Dave Airlie:
"This is a set of fixes that have queued up, I think I might have
another pull with some more before rc1 but I'd like to dequeue what I
have now just in case Easter is more eggciting that expected.
The main thing in here is a fix for a longstanding nouveau power
management issues on certain laptops, it should help runtime
suspend/resume for a lot of people.
There is also a reverted patch for some drm_mm behaviour in atomic
contexts.
Summary:
core:
- revert drm_mm atomic patch
- dt binding fixes
fbcon:
- null ptr error fix
i915:
- GVT fixes
nouveau:
- runpm fix
- svm fixes
amdgpu:
- HDCP fixes
- gfx10 fix
- Misc display fixes
- BACO fixes
amdkfd:
- Fix memory leak
vboxvideo:
- remove conflicting fbs
vc4:
- mode validation fix
xen:
- fix PTR_ERR usage"
* tag 'drm-next-2020-04-08' of git://anongit.freedesktop.org/drm/drm: (41 commits)
drm/nouveau/kms/nv50-: wait for FIFO space on PIO channels
drm/nouveau/nvif: protect waits against GPU falling off the bus
drm/nouveau/nvif: access PTIMER through usermode class, if available
drm/nouveau/gr/gp107,gp108: implement workaround for HW hanging during init
drm/nouveau: workaround runpm fail by disabling PCI power management on certain intel bridges
drm/nouveau/svm: remove useless SVM range check
drm/nouveau/svm: check for SVM initialized before migrating
drm/nouveau/svm: fix vma range check for migration
drm/nouveau: remove checks for return value of debugfs functions
drm/nouveau/ttm: evict other IO mappings when running out of BAR1 space
drm/amdkfd: kfree the wrong pointer
drm/amd/display: increase HDCP authentication delay
drm/amd/display: Correctly cancel future watchdog and callback events
drm/amd/display: Don't try hdcp1.4 when content_type is set to type1
drm/amd/powerplay: move the ASIC specific nbio operation out of smu_v11_0.c
drm/amd/powerplay: drop redundant BIF doorbell interrupt operations
drm/amd/display: Fix dcn21 num_states
drm/amd/display: Enable BT2020 in COLOR_ENCODING property
drm/amd/display: LFC not working on 2.0x range monitors (v2)
drm/amd/display: Support plane level CTM
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
"An update to the Goodix touchscreen driver to enable it work properly
on various Bay Trail and Cherry Trail devices, and a few other
assorted changes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (26 commits)
Input: update SPDX tag for input-event-codes.h
Input: i8042 - add Acer Aspire 5738z to nomux list
Input: goodix - fix compilation when ACPI support is disabled
dt-bindings: touchscreen: Convert edt-ft5x06 to json-schema
Input: of_touchscreen - explicitly choose axis
Input: goodix - support gt9147 touchpanel
dt-bindings: touchscreen: goodix: support of gt9147
Input: goodix - add support for Goodix GT917S
Input: goodix - use string-based chip ID
dt-bindings: input: touchscreen: add compatible string for Goodix GT917S
Input: goodix - add support for more then one touch-key
Input: goodix - fix spurious key release events
Input: goodix - try to reset the controller if the i2c-test fails
Input: goodix - restore config on resume if necessary
Input: goodix - make goodix_send_cfg() take a raw buffer as argument
Input: goodix - add minimum firmware size check
Input: goodix - save a copy of the config from goodix_read_config()
Input: goodix - move defines to above struct goodix_ts_data declaration
Input: goodix - add support for controlling the IRQ pin through ACPI methods
Input: goodix - add support for getting IRQ + reset GPIOs on Bay Trail devices
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Convert tsens configuration DT binding to yaml (Rajeshwari)
- Add interrupt support on the rcar sensor (Niklas Söderlund)
- Add a new Spreadtrum thermal driver (Baolin Wang)
- Add thermal binding for the fsl scu board, a new API to retrieve the
sensor id bound to the thermal zone and i.MX system controller sensor
(Anson Huang))
- Remove warning log when a deferred probe is requested on Exynos
(Marek Szyprowski)
- Add the thermal monitoring unit support for imx8mm with its DT
bindings (Anson Huang)
- Rephrase the Kconfig text for clarity (Linus Walleij)
- Use the gpio descriptor for the ti-soc-thermal (Linus Walleij)
- Align msg structure to 4 bytes for i.MX SC, fix the Kconfig
dependency, add the __may_be unused annotation for PM functions and
the COMPILE_TEST option for imx8mm (Anson Huang)
- Fix a dependency on regmap in Kconfig for qoriq (Yuantian Tang)
- Add DT binding and support for the rcar gen3 r8a77961 and improve the
error path on the rcar init function (Niklas Söderlund)
- Cleanup and improvements for the tsens Qcom sensor (Amit Kucheria)
- Improve code by removing lock and caching values in the rcar thermal
sensor (Niklas Söderlund)
- Cleanup in the qoriq drivers and add a call to
imx_thermal_unregister_legacy_cooling in the removal function (Anson
Huang)
- Remove redundant 'maxItems' in tsens and sprd DT bindings (Rob
Herring)
- Change the thermal DT bindings by making the cooling-maps optional
(Yuantian Tang)
- Add Tiger Lake support (Sumeet Pawnikar)
- Use scnprintf() for avoiding potential buffer overflow (Takashi Iwai)
- Make pkg_temp_lock a raw_spinlock_t(Clark Williams)
- Fix incorrect data types by changing them to signed on i.MX SC (Anson
Huang)
- Replace zero-length array with flexible-array member (Gustavo A. R.
Silva)
- Add support for i.MX8MP in the driver and in the DT bindings (Anson
Huang)
- Fix return value of the cpufreq_set_cur_state() function (Willy
Wolff)
- Remove abusing and scary WARN_ON in the cpufreq cooling device
(Daniel Lezcano)
- Fix build warning of incorrect argument type reported by sparse on
imx8mm (Anson Huang)
- Fix stub for the devfreq cooling device (Martin Blumenstingl)
- Fix cpu idle cooling documentation (Sergey Vidishev)
* tag 'thermal-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (52 commits)
Documentation: cpu-idle-cooling: Fix diagram for 33% duty cycle
thermal: devfreq_cooling: inline all stubs for CONFIG_DEVFREQ_THERMAL=n
thermal: imx8mm: Fix build warning of incorrect argument type
thermal/drivers/cpufreq_cooling: Remove abusing WARN_ON
thermal/drivers/cpufreq_cooling: Fix return of cpufreq_set_cur_state
thermal: imx8mm: Add i.MX8MP support
dt-bindings: thermal: imx8mm-thermal: Add support for i.MX8MP
thermal: qcom: tsens.h: Replace zero-length array with flexible-array member
thermal: imx_sc_thermal: Fix incorrect data type
thermal: int340x_thermal: Use scnprintf() for avoiding potential buffer overflow
thermal: int340x: processor_thermal: Add Tiger Lake support
thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t
dt-bindings: thermal: make cooling-maps property optional
dt-bindings: thermal: qcom-tsens: Remove redundant 'maxItems'
dt-bindings: thermal: sprd: Remove redundant 'maxItems'
thermal: imx: Calling imx_thermal_unregister_legacy_cooling() in .remove
thermal: qoriq: Sort includes alphabetically
thermal: qoriq: Use devm_add_action_or_reset() to handle all cleanups
thermal: rcar_thermal: Remove lock in rcar_thermal_get_current_temp()
thermal: rcar_thermal: Do not store ctemp in rcar_thermal_priv
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull mfd updates from Lee Jones:
"New Drivers:
- Add support for IQS620A/621/622/624/625 Azoteq IQS62X Sensors
New Device Support:
- Add support for ADC, IRQ, Regulator, RTC and WDT to Ricoh RN5T618 PMIC
- Add support for Comet Lake to Intel LPSS
New Functionality:
- Add support for Charger Detection to Spreadtrum SC27xx PMICs
- Add support for Interrupt Polarity to Dialog Semi DA9062/61 PMIC
- Add ACPI enumeration support to Diolan DLN2 USB Adaptor
Fix-ups:
- Device Tree; iqs62x, rn5t618, cros_ec_dev, stm32-lptimer, rohm,bd71837, rohm,bd71847
- I2C registration; rn5t618
- Kconfig; MFD_CPCAP, AB8500_CORE, MFD_WM8994, MFD_WM97xx, MFD_STPMIC1
- Use flexible-array members; omap-usb-tll, qcom-pm8xxx
- Remove unnecessary casts; omap-usb-host, omap-usb-tll
- Power (suspend/resume/poweroff) enhancements; rk808
- Improve error/sanity checking; dln2
- Use snprintf(); aat2870-core
Bug Fixes:
- Fix PCI IDs in intel-lpss-pci"
* tag 'mfd-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (33 commits)
mfd: intel-lpss: Fix Intel Elkhart Lake LPSS I2C input clock
mfd: aat2870: Use scnprintf() for avoiding potential buffer overflow
mfd: dln2: Allow to be enumerated via ACPI
mfd: da9062: Add support for interrupt polarity defined in device tree
dt-bindings: bd718x7: Yamlify and add BD71850
mfd: dln2: Fix sanity checking for endpoints
mfd: intel-lpss: Add Intel Comet Lake PCH-V PCI IDs
mfd: sc27xx: Add USB charger type detection support
dt-bindings: mfd: Document STM32 low power timer bindings
mfd: rk808: Convert RK805 to shutdown/suspend hooks
mfd: rk808: Reduce shutdown duplication
mfd: rk808: Stop using syscore ops
mfd: rk808: Ensure suspend/resume hooks always work
mfd: rk808: Always use poweroff when requested
mfd: omap: Remove useless cast for driver.name
mfd: Kconfig: Fix some misspelling of the word functionality
mfd: pm8xxx: Replace zero-length array with flexible-array member
mfd: omap-usb-tll: Replace zero-length array with flexible-array member
mfd: cpcap: Fix compile if MFD_CORE is not selected
mfd: cros_ec: Check DT node for usbpd-notify add
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"Switch pwm_bl and corgi_lcd drivers to use GPIO descriptors"
* tag 'backlight-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: corgi: Convert to use GPIO descriptors
backlight: pwm_bl: Switch to full GPIO descriptor
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"One new driver, some driver changes, and some late minute cleanups --
but those are just whitespace so should be okay.
There are some major changes being prepared (multicolor, triggers) so
the next release likely will be more interesting"
* tag 'leds-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
leds: core: Fix warning message when init_data
leds: make functions easier to understand
leds: sort Makefile entries
leds: old enums are not really applicable to new code
leds: ip30: label power LED as such
leds: lm3532: make bitfield 'enabled' unsigned
leds: leds-pwm: Replace zero-length array with flexible-array member
leds: leds-is31fl32xx: Replace zero-length array with flexible-array member
leds: pwm: remove useless pwm_period_ns
leds: pwm: remove header
leds: pwm: convert to atomic PWM API
leds: pwm: simplify if condition
leds: add SGI IP30 led support
leds: lm3697: fix spelling mistake "To" -> "Too"
leds: leds-bd2802: remove set but not used variable 'pdata'
leds: ns2: Convert to GPIO descriptors
leds: ns2: Absorb platform data
|
|
It's definitely incorrect to mark the lock as taken even if
down_read_killable() failed.
This wass overlooked when we switched from down_read() to
down_read_killable() because down_read() won't fail while
down_read_killable() could.
Fixes: 71335f37c5e8 ("mm/gup: allow to react to fatal signals")
Reported-by: syzbot+a8c70b7f3579fc0587dc@syzkaller.appspotmail.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
lookup_node() uses gup to pin the page and get node information. It
checks against ret>=0 assuming the page will be filled in. However it's
also possible that gup will return zero, for example, when the thread is
quickly killed with a fatal signal. Teach lookup_node() to gracefully
return an error -EFAULT if it happens.
Meanwhile, initialize "page" to NULL to avoid potential risk of
exploiting the pointer.
Fixes: 4426e945df58 ("mm/gup: allow VM_FAULT_RETRY for multiple times")
Reported-by: syzbot+693dc11fcb53120b5559@syzkaller.appspotmail.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://people.freedesktop.org/~agd5f/linux into drm-next
amd-drm-next-5.7-2020-04-01:
amdgpu:
- HDCP fixes
- gfx10 fix
- Misc display fixes
- BACO fixes
amdkfd:
- Fix memory leak
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200401194619.4217-1-alexander.deucher@amd.com
|
|
A couple of misc fixes/workarounds for some issues that are causing a
lot of pain for people.
Of most interest are the PCI power management and GR init WARs, which
effect a rather significant number of laptop systems that are in use
today.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv5Ef5YKS9EPBH3YUubzvVr++_rzjgSqV_B5nC0L2kB6-Q@mail.gmail.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
A bunch of fixes to avoid null pointer dereference in fbcon, fix a return
in xen, some DT bindings fixes, a vc4 issue with 1920x1200 mode validation,
and a conflicting framebuffer in vboxvideo.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200404090057.a3m7uw6tavwtcyon@gilmour.lan
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
Only gvt fixes on this round:
- Fix non-privilege access warning (Tina)
- Fix display port type (Tina)
- BDW cmd parser missed SWTESS_BASE_ADDRESS (Yan)
- Bypass length check of LRI (Yan)
- Fix one klocwork warning (Tina)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200402213026.GA1141017@intel.com
|
|
Add a new sysfs attribute to show how many NVMe devices are remapped.
Userspace like distro installer can use this info to ask user to change
the BIOS setting.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
