| Age | Commit message (Collapse) | Author |
|---|
|
Add a function to get an array of skbs from the NAPI percpu cache.
It's supposed to be a drop-in replacement for
kmem_cache_alloc_bulk(skbuff_head_cache, GFP_ATOMIC) and
xdp_alloc_skb_bulk(GFP_ATOMIC). The difference (apart from the
requirement to call it only from the BH) is that it tries to use
as many NAPI cache entries for skbs as possible, and allocate new
ones only if needed.
The logic is as follows:
* there is enough skbs in the cache: decache them and return to the
caller;
* not enough: try refilling the cache first. If there is now enough
skbs, return;
* still not enough: try allocating skbs directly to the output array
with %GFP_ZERO, maybe we'll be able to get some. If there's now
enough, return;
* still not enough: return as many as we were able to obtain.
Most of times, if called from the NAPI polling loop, the first one will
be true, sometimes (rarely) the second one. The third and the fourth --
only under heavy memory pressure.
It can save significant amounts of CPU cycles if there are GRO cycles
and/or Tx completion cycles (anything that descends to
napi_skb_cache_put()) happening on this CPU.
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
cpumap still uses linked lists to store a list of skbs to pass to the
stack. Now that we don't use listified Rx in favor of
napi_gro_receive(), linked list is now an unneeded overhead.
Inside the polling loop, we already have an array of skbs. Let's reuse
it for skbs passed to cpumap (generic XDP) and keep there in case of
XDP_PASS when a program is installed to the map itself. Don't list
regular xdp_frames after converting them to skbs as well; store them
in the mentioned array (but *before* generic skbs as the latters have
lower priority) and call gro_receive_skb() for each array element after
they're done.
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
cpumap has its own BH context based on kthread. It has a sane batch
size of 8 frames per one cycle.
GRO can be used here on its own. Adjust cpumap calls to the upper stack
to use GRO API instead of netif_receive_skb_list() which processes skbs
by batches, but doesn't involve GRO layer at all.
In plenty of tests, GRO performs better than listed receiving even
given that it has to calculate full frame checksums on the CPU.
As GRO passes the skbs to the upper stack in the batches of
@gro_normal_batch, i.e. 8 by default, and skb->dev points to the
device where the frame comes from, it is enough to disable GRO
netdev feature on it to completely restore the original behaviour:
untouched frames will be being bulked and passed to the upper stack
by 8, as it was with netif_receive_skb_list().
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Make GRO init and cleanup functions global to be able to use GRO
without a NAPI instance. Taking into account already global gro_flush(),
it's now fully usable standalone.
New functions are not exported, since they're not supposed to be used
outside of the kernel core code.
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In fact, these two are not tied closely to each other. The only
requirements to GRO are to use it in the BH context and have some
sane limits on the packet batches, e.g. NAPI has a limit of its
budget (64/8/etc.).
Move purely GRO fields into a new structure, &gro_node. Embed it
into &napi_struct and adjust all the references.
gro_node::cached_napi_id is effectively the same as
napi_struct::napi_id, but to be used on GRO hotpath to mark skbs.
napi_struct::napi_id is now a fully control path field.
Three Ethernet drivers use napi_gro_flush() not really meant to be
exported, so move it to <net/gro.h> and add that include there.
napi_gro_receive() is used in more than 100 drivers, keep it
in <linux/netdevice.h>.
This does not make GRO ready to use outside of the NAPI context
yet.
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Building with W=1 shows a warning about xge_acpi_match being unused when
CONFIG_ACPI is disabled:
drivers/net/ethernet/apm/xgene-v2/main.c:723:36: error: unused variable 'xge_acpi_match' [-Werror,-Wunused-const-variable]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250225163341.4168238-2-arnd@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Building with W=1 shows a warning about hns_mdio_acpi_match being unused when
CONFIG_ACPI is disabled:
drivers/net/ethernet/hisilicon/hns_mdio.c:631:36: error: unused variable 'hns_mdio_acpi_match' [-Werror,-Wunused-const-variable]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250225163341.4168238-1-arnd@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When extra warnings are enable, there are configurations that build
pktgen without CONFIG_XFRM, which leaves a static const variable unused:
net/core/pktgen.c:213:1: error: unused variable 'F_IPSEC' [-Werror,-Wunused-const-variable]
213 | PKT_FLAGS
| ^~~~~~~~~
net/core/pktgen.c:197:2: note: expanded from macro 'PKT_FLAGS'
197 | pf(IPSEC) /* ipsec on for flows */ \
| ^~~~~~~~~
This could be marked as __maybe_unused, or by making the one use visible
to the compiler by slightly rearranging the #ifdef blocks. The second
variant looks slightly nicer here, so use that.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Link: https://patch.msgid.link/20250225085722.469868-1-arnd@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Ahmed Zaki says:
====================
net: napi: add CPU affinity to napi->config
Drivers usually need to re-apply the user-set IRQ affinity to their IRQs
after reset. However, since there can be only one IRQ affinity notifier
for each IRQ, registering IRQ notifiers conflicts with the ARFS rmap
management in the core (which also registers separate IRQ affinity
notifiers).
Move the IRQ affinity management to the napi struct. This way we can have
a unified IRQ notifier to re-apply the user-set affinity and also manage
the ARFS rmaps.
The first patch moves the aRFS rmap management to core. It also adds the
IRQ affinity mask to napi_config and re-applies the mask after reset.
Patches 2, 4 and 5 use the new API for ena, ice and idpf drivers.
ICE does not always delete the NAPIs before releasing the IRQs. The third
patch makes sure the driver removes the IRQ number along with the queue
when the NAPIs are disabled. Without this, the next patches in this series
would free the IRQ before releasing the IRQ notifier (which generates
warnings).
Tested on ice and idpf.
v8: https://lore.kernel.org/20250211210657.428439-1-ahmed.zaki@intel.com
v7: https://lore.kernel.org/20250204220622.156061-1-ahmed.zaki@intel.com
v6: https://lore.kernel.org/20250118003335.155379-1-ahmed.zaki@intel.com
v5: https://lore.kernel.org/20250113171042.158123-1-ahmed.zaki@intel.com
v4: https://lore.kernel.org/20250109233107.17519-1-ahmed.zaki@intel.com
v3: https://lore.kernel.org/20250104004314.208259-1-ahmed.zaki@intel.com
v2: https://lore.kernel.org/202412190454.nwvp3hU2-lkp@intel.com
v1: https://lore.kernel.org/20241210002626.366878-1-ahmed.zaki@intel.com
====================
Link: https://patch.msgid.link/20250224232228.990783-1-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests to check that the napi retained the IRQ after down/up,
multiple changes in the number of rx queues and after
attaching/releasing XDP program.
Tested on ice and idpf:
# NETIF=<iface> tools/testing/selftests/drivers/net/hw/irq.py
KTAP version 1
1..4
ok 1 irq.check_irqs_reported
ok 2 irq.check_reconfig_queues
ok 3 irq.check_reconfig_xdp
ok 4 irq.check_down
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Tested-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://patch.msgid.link/20250224232228.990783-7-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Delete the driver CPU affinity info and use the core's napi config
instead.
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://patch.msgid.link/20250224232228.990783-6-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Delete the driver CPU affinity and aRFS rmap info, use the core's
API instead.
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://patch.msgid.link/20250224232228.990783-5-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We set the NAPI's IRQ number in ice_vsi_set_napi_queues(). Clear the
NAPI's IRQ in ice_vsi_clear_napi_queues().
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://patch.msgid.link/20250224232228.990783-4-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the core's rmap notifiers and delete our own.
Acked-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://patch.msgid.link/20250224232228.990783-3-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A common task for most drivers is to remember the user-set CPU affinity
to its IRQs. On each netdev reset, the driver should re-assign the user's
settings to the IRQs. Unify this task across all drivers by moving the CPU
affinity to napi->config.
However, to move the CPU affinity to core, we also need to move aRFS
rmap management since aRFS uses its own IRQ notifiers.
For the aRFS, add a new netdev flag "rx_cpu_rmap_auto". Drivers supporting
aRFS should set the flag via netif_enable_cpu_rmap() and core will allocate
and manage the aRFS rmaps. Freeing the rmap is also done by core when the
netdev is freed. For better IRQ affinity management, move the IRQ rmap
notifier inside the napi_struct and add new notify.notify and
notify.release functions: netif_irq_cpu_rmap_notify() and
netif_napi_affinity_release().
Now we have the aRFS rmap management in core, add CPU affinity mask to
napi_config. To delegate the CPU affinity management to the core, drivers
must:
1 - set the new netdev flag "irq_affinity_auto":
netif_enable_irq_affinity(netdev)
2 - create the napi with persistent config:
netif_napi_add_config()
3 - bind an IRQ to the napi instance: netif_napi_set_irq()
the core will then make sure to use re-assign affinity to the napi's
IRQ.
The default IRQ mask is set to one cpu starting from the closest NUMA.
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://patch.msgid.link/20250224232228.990783-2-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Normally, a bond uses the MAC address of the first added slave as the bond’s
MAC address. And the bond will set active slave’s MAC address to bond’s
address if fail_over_mac is set to none (0) or follow (2).
When the first slave is removed, the bond will still use the removed slave’s
MAC address, which can lead to a duplicate MAC address and potentially cause
issues with the switch. To avoid confusion, let's warn the user in all
situations, including when fail_over_mac is set to 2 or not in active-backup
mode.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250225033914.18617-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The linked series wants to add skb tx completion timestamps.
That needs a bit in skb_shared_info.tx_flags, but all are in use.
A per-skb bit is only needed for features that are configured on a
per packet basis. Per socket features can be read from sk->sk_tsflags.
Per packet tsflags can be set in sendmsg using cmsg, but only those in
SOF_TIMESTAMPING_TX_RECORD_MASK.
Per packet tsflags can also be set without cmsg by sandwiching a
send inbetween two setsockopts:
val |= SOF_TIMESTAMPING_$FEATURE;
setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, &val, sizeof(val));
write(fd, buf, sz);
val &= ~SOF_TIMESTAMPING_$FEATURE;
setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, &val, sizeof(val));
Changing a datapath test from skb_shinfo(skb)->tx_flags to
skb->sk->sk_tsflags can change behavior in that case, as the tx_flags
is written before the second setsockopt updates sk_tsflags.
Therefore, only bits can be reclaimed that cannot be set by cmsg and
are also highly unlikely to be used to target individual packets
otherwise.
Free up the bit currently used for SKBTX_HW_TSTAMP_USE_CYCLES. This
selects between clock and free running counter source for HW TX
timestamps. It is probable that all packets of the same socket will
always use the same source.
Link: https://lore.kernel.org/netdev/cover.1739988644.git.pav@iki.fi/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://patch.msgid.link/20250225023416.2088705-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Willem de Bruijn says:
====================
expand cmsg_ipv6.sh with ipv4 support
Expand IPV6_TCLASS to also cover IP_TOS.
Expand IPV6_HOPLIMIT to also cover IP_TTL.
A series of two patches for basic readability (patch 1 is a noop),
and so that git does not interpret code changes + file rename as
a whole file del + add.
====================
Link: https://patch.msgid.link/20250225022431.2083926-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Expand IPV6_TCLASS to also cover IP_TOS.
Expand IPV6_HOPLIMIT to also cover IP_TTL.
Expand csmg_sender.c to allow setting IPv4 setsockopts.
Also rename struct v6 to cmsg to match its expanded scope.
Don't bother updating all occurrences of tclass and hoplimit.
Rename cmsg_ipv6.sh to cmsg_ip.sh to match the expanded scope.
Be careful around the subtle API difference between TCLASS and TOS.
IP_TOS includes ECN bits. Add a test to verify that these are masked
when making routing decisions.
Diff is more concise with --word-diff
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250225022431.2083926-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move IPV6_TCLASS and IPV6_HOPLIMIT into loops, to be able to use them
for IP_TOS and IP_TTL in a follow-on patch.
Indentation in this file is a mix of four spaces and tabs for double
indents. To minimize code churn, maintain that pattern.
Very small diff if viewing with -w.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250225022431.2083926-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Yong-Hao Zou mentioned that linux was not strict as other OS in 3WHS,
for flows using TCP TS option (RFC 7323)
As hinted by an old comment in tcp_check_req(),
we can check the TSEcr value in the incoming packet corresponds
to one of the SYNACK TSval values we have sent.
In this patch, I record the oldest and most recent values
that SYNACK packets have used.
Send a challenge ACK if we receive a TSEcr outside
of this range, and increase a new SNMP counter.
nstat -az | grep TSEcrRejected
TcpExtTSEcrRejected 0 0.0
Due to TCP fastopen implementation, do not apply yet these checks
for fastopen flows.
v2: No longer use req->num_timeout, but treq->snt_tsval_first
to detect when first SYNACK is prepared. This means
we make sure to not send an initial zero TSval.
Make sure MPTCP and TCP selftests are passing.
Change MIB name to TcpExtTSEcrRejected
v1: https://lore.kernel.org/netdev/CADVnQykD8i4ArpSZaPKaoNxLJ2if2ts9m4As+=Jvdkrgx1qMHw@mail.gmail.com/T/
Reported-by: Yong-Hao Zou <yonghaoz1994@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250225171048.3105061-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Driver was not configured to select page_pool, causing a compile error
if page pool module was not already selected.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502211253.3XRosM9I-lkp@intel.com/
Fixes: d24cb52b2d8a ("enic: Use the Page Pool API for RX")
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250224234350.23157-2-johndale@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Tariq Toukan says:
====================
mlx5-next updates 2025-02-24
The following pull-request contains common mlx5 updates
for your *net-next* tree.
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Change POOL_NEXT_SIZE define value and make it global
net/mlx5: Add new health syndrome error and crr bit offset
====================
Link: https://patch.msgid.link/20250224212446.523259-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selecting LIBWX requires that its dependencies are met first:
WARNING: unmet direct dependencies detected for LIBWX
Depends on [m]: NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_WANGXUN [=y] && PTP_1588_CLOCK_OPTIONAL [=m]
Selected by [y]:
- TXGBE [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_WANGXUN [=y] && PCI [=y] && COMMON_CLK [=y] && I2C_DESIGNWARE_PLATFORM [=y]
ld.lld-21: error: undefined symbol: ptp_schedule_worker
>>> referenced by wx_ptp.c:747 (/home/arnd/arm-soc/drivers/net/ethernet/wangxun/libwx/wx_ptp.c:747)
>>> drivers/net/ethernet/wangxun/libwx/wx_ptp.o:(wx_ptp_reset) in archive vmlinux.a
Add the smae dependency on PTP_1588_CLOCK_OPTIONAL to the two driver
using this library module.
Fixes: 06e75161b9d4 ("net: wangxun: Add support for PTP clock")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250224140516.1168214-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Gal Pressman says:
====================
Symmetric OR-XOR RSS hash
Add support for a new type of input_xfrm: Symmetric OR-XOR.
Symmetric OR-XOR performs hash as follows:
(SRC_IP | DST_IP, SRC_IP ^ DST_IP, SRC_PORT | DST_PORT, SRC_PORT ^ DST_PORT)
Configuration is done through ethtool -x/X command.
For mlx5, the default is already symmetric hash, this patch now exposes
this to userspace and allows enabling/disabling of the feature.
v5: https://lore.kernel.org/20250220113435.417487-1-gal@nvidia.com
v4: https://lore.kernel.org/20250216182453.226325-1-gal@nvidia.com
v3: https://lore.kernel.org/20250205135341.542720-1-gal@nvidia.com
v2: https://lore.kernel.org/20250203150039.519301-1-gal@nvidia.com
====================
Link: https://patch.msgid.link/20250224174416.499070-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a selftest that verifies symmetric RSS hash is working as intended.
The test runs iterations of traffic, swapping the src/dst UDP ports, and
verifies that the same RX queue is receiving the traffic in both cases.
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250224174416.499070-5-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of guessing a port and checking whether it's available, get an
available port from the OS.
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250224174416.499070-4-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow control over the symmetric RSS hash, which was previously set to
enabled by default by the driver.
Symmetric OR-XOR RSS can now be queried and controlled using the
'ethtool -x/X' command.
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250224174416.499070-3-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add an additional type of symmetric RSS hash type: OR-XOR.
The "Symmetric-OR-XOR" algorithm transforms the input as follows:
(SRC_IP | DST_IP, SRC_IP ^ DST_IP, SRC_PORT | DST_PORT, SRC_PORT ^ DST_PORT)
Change 'cap_rss_sym_xor_supported' to 'supported_input_xfrm', a bitmap
of supported RXH_XFRM_* types.
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20250224174416.499070-2-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update header inclusions to follow IWYU (Include What You Use)
principle.
In this case replace *gpio.h, which are subject to remove by the GPIOLIB
subsystem, with the respective headers that are being used by the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250224120037.3801609-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Russell King says:
====================
net: stmmac: dwc-qos: clean up clock initialisation
My single v1 patch has become two patches as a result of the build
error, as it appears this code uses "data" differently from others.
v2 still produced build warnings despite local builds being clean,
so v3 addresses those.
The first patch brings some consistency with other drivers, naming
local variables that refer to struct plat_stmmacenet_data as
"plat_dat", as is used elsewhere in this driver.
====================
Link: https://patch.msgid.link/Z7yj_BZa6yG02KcI@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clean up the clock initialisation by providing a helper to find a
named clock in the bulk clocks, and provide the name of the stmmac
clock in match data so we can locate the stmmac clock in generic
code.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/E1tmbhj-004vSz-Pt@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Most of the stmmac driver uses "plat_dat" to name the platform data,
and "data" is used for the glue driver data. make dwc-qos follow
this pattern to avoid silly mistakes.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/E1tmbhe-004vSt-M3@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
- The Open Virtual Network (OVN) routing netlink handler uses ID 84
- Will also add to `/etc/iproute2/rt_protos` once this is accepted
- For more information: https://github.com/ovn-org/ovn
Signed-off-by: Jonas Gottlieb <jonas.gottlieb@stackit.cloud>
Link: https://patch.msgid.link/Z7w_e7cfA3xmHDa6@SIT-SDELAP4051.int.lidl.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some distributions may not enable MPTCP by default. All other MPTCP tests
source mptcp_lib.sh to ensure MPTCP is enabled before testing. However,
the ip_local_port_range test is the only one that does not include this
step.
Let's also ensure MPTCP is enabled in netns for ip_local_port_range so
that it passes on all distributions.
Suggested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250224094013.13159-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Although the PCI device ID and Vendor ID for the RPM (MAC) block
have remained the same across Octeon CN10K and the next-generation
CN20K silicon, Hardware architecture has changed (NIX mapped RPMs
and RFOE Mapped RPMs).
Add PCI Subsystem IDs to the device table to ensure that this driver
can be probed from NIX mapped RPM devices only.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20250224035603.1220913-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the unused payload array from the struct sctp_idatahdr.
Cc: Kees Cook <kees@kernel.org>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250223204505.2499-3-thorsten.blum@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Mohsin Bashir says:
====================
eth: fbnic: Update fbnic driver
This patchset makes following trivial changes to the fbnic driver:
1) Add coverage for PCIe CSRs in the ethtool register dump.
2) Consolidate the PUL_USER CSR section, update the end boundary,
and remove redundant definition of the end boundary.
3) Update the return value in kdoc for fbnic_netdev_alloc().
====================
Link: https://patch.msgid.link/20250221201813.2688052-1-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix return value in kdoc for fbnic_netdev_alloc()
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Move PUL_USER CSRs in the relevant section, update the end boundary
address, and remove the redundant definition of end boundary.
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Provide coverage to PCIe registers in ethtool register dump
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch is a starting point for moving phylib-internal
declarations to a private header file.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/082eacd2-a888-4716-8797-b3491ce02820@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
mptcp: pm: misc cleanups, part 3
These cleanups lead the way to the unification of the path-manager
interfaces, and allow future extensions. The following patches are not
all linked to each others, but are all related to the path-managers,
except the last three.
- Patch 1: remove unused returned value in mptcp_nl_set_flags().
- Patch 2: new flag: avoid iterating over all connections if not needed.
- Patch 3: add a build check making sure there is enough space in cb-ctx.
- Patch 4: new mptcp_pm_genl_fill_addr helper to reduce duplicated code.
- Patch 5: simplify userspace_pm_append_new_local_addr helper.
- Patch 6: drop unneeded inet6_sk().
- Patch 7: use ipv6_addr_equal() instead of !ipv6_addr_cmp()
- Patch 8: scheduler: split an interface in two.
- Patch 9: scheduler: save 64 bytes of currently unused data.
- Patch 10: small optimisation to exit early in case of retransmissions.
====================
Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-0-2b70ab1cee79@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A small cleanup, reordering the conditions to avoid checking things
twice.
The code here is called in case of timeout on a TCP connection, before
triggering a retransmission. But it only acts on SYN + MPC packets.
So the conditions can be re-order to exit early in case of non-MPTCP
SYN + MPC. This also reduce the indentation levels.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-10-2b70ab1cee79@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Thanks for the previous commit ("mptcp: sched: split get_subflow
interface into two"), the mptcp_sched_data structure is now currently
unused.
This structure has been added to allow future extensions that are not
ready yet. At the end, this structure will not even be used at all when
mptcp_subflow bpf_iter will be supported [1].
Here is a first step to save 64 bytes on the stack for each scheduling
operation. The structure is not removed yet not to break the WIP work on
these extensions, but will be done when [1] will be ready and applied.
Link: https://lore.kernel.org/6645ad6e-8874-44c5-8730-854c30673218@linux.dev [1]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-9-2b70ab1cee79@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
get_retrans() interface of the burst packet scheduler invokes a sleeping
function mptcp_pm_subflow_chk_stale(), which calls __lock_sock_fast().
So get_retrans() interface should be set with BPF_F_SLEEPABLE flag in
BPF. But get_send() interface of this scheduler can't be set with
BPF_F_SLEEPABLE flag since it's invoked in ack_update_msk() under mptcp
data lock.
So this patch has to split get_subflow() interface of packet scheduer into
two interfaces: get_send() and get_retrans(). Then we can set get_retrans()
interface alone with BPF_F_SLEEPABLE flag.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-8-2b70ab1cee79@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use ipv6_addr_equal() to check whether two IPv6 addresses are equal in
mptcp_addresses_equal().
This is more appropriate than using !ipv6_addr_cmp().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-7-2b70ab1cee79@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mptcp_event_add_subflow(), mptcp_event_pm_listener() and
mptcp_nl_find_ssk(), 'issk' has already been got through inet_sk().
No need to use inet6_sk() to get 'ipv6_pinfo' again, just use
issk->pinet6 instead. This patch also drops these 'ipv6_pinfo'
variables.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-6-2b70ab1cee79@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The variable 'match' in mptcp_userspace_pm_append_new_local_addr() is a
redundant one, and this patch drops it.
No need to define 'match' as 'struct mptcp_pm_addr_entry *' type. In this
function, it's only used to check whether it's NULL. It can be defined as
a Boolean one.
Also other variables 'addr_match' and 'id_match' make 'match' a redundant
one, which can be replaced by directly checking 'addr_match && id_match'.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-5-2b70ab1cee79@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To save some redundant code in dump_addr() interfaces of both the
netlink PM and userspace PM, the code that calls netlink message
helpers (genlmsg_put/cancel/end) and mptcp_nl_fill_addr() is wrapped
into a new helper mptcp_pm_genl_fill_addr().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-4-2b70ab1cee79@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
