summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-03-24arm64: dts: qcom: msm8994-msft-lumia: drop simple-bus from clocksKrzysztof Kozlowski
'clocks' node is not a bus, but just a placeholder for clocks: msm8992-msft-lumia-octagon-talkman.dtb: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' From schema: dtschema/schemas/simple-bus.yaml msm8992-msft-lumia-octagon-talkman.dtb: clocks: xo-board: {'compatible': ['fixed-clock'], '#clock-cells': [[0]], ... From schema: dtschema/schemas/simple-bus.yaml Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230324202244.744271-3-krzysztof.kozlowski@linaro.org
2023-03-24arm64: dts: qcom: apq8096-db820c: drop simple-bus from clocksKrzysztof Kozlowski
'clocks' node is not a bus, but just a placeholder for clocks: apq8096-db820c.dtb: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' From schema: dtschema/schemas/simple-bus.yaml apq8096-db820c.dtb: clocks: xo-board: {'compatible': ['fixed-clock'], '#clock-cells': [[0]], ... From schema: dtschema/schemas/simple-bus.yaml Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230324202244.744271-2-krzysztof.kozlowski@linaro.org
2023-03-24arm64: dts: qcom: sm8450: fix pcie1 gpios properties nameNeil Armstrong
Add the final "s" to the pgio properties and fix the invalid "enable" name to the correct "wake", checked against the HDK8450 schematics. Fixes: bc6588bc25fb ("arm64: dts: qcom: sm8450: add PCIe1 root device") Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230323-topic-sm8450-upstream-dt-bindings-fixes-v2-4-0ca1bea1a843@linaro.org
2023-03-24arm64: dts: qcom: sm8450: remove invalid power-domain-names in pcie nodesNeil Armstrong
Fixes the following DT bindings check error: pci@1c00000: Unevaluated properties are not allowed ('power-domain-names' were unexpected) Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230323-topic-sm8450-upstream-dt-bindings-fixes-v2-3-0ca1bea1a843@linaro.org
2023-03-24arm64: dts: qcom: ipq8074-hk10: enable QMP device, not the PHY nodeDmitry Baryshkov
Correct PCIe PHY enablement to refer the QMP device nodes rather than PHY device nodes. QMP nodes have 'status = "disabled"' property in the ipq8074.dtsi, while PHY nodes do not correspond to the actual device and do not have the status property. Fixes: 1ed34da63a37 ("arm64: dts: qcom: Add board support for HK10") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230324021651.1799969-2-dmitry.baryshkov@linaro.org
2023-03-24arm64: dts: qcom: ipq8074-hk01: enable QMP device, not the PHY nodeDmitry Baryshkov
Correct PCIe PHY enablement to refer the QMP device nodes rather than PHY device nodes. QMP nodes have 'status = "disabled"' property in the ipq8074.dtsi, while PHY nodes do not correspond to the actual device and do not have the status property. Fixes: e8a7fdc505bb ("arm64: dts: ipq8074: qcom: Re-arrange dts nodes based on address") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230324021651.1799969-1-dmitry.baryshkov@linaro.org
2023-03-24arm64: dts: qcom: sc8280xp-x13s: enable alternate touchpadJohan Hovold
Enable both touchpad nodes in the devictree and let the HID driver determine which one is actually populated (by attempting to read from each i2c address). Ideally this would not be needed and the boot firmware should instead enable only the node for the populated touchpad, but this is unlikely to ever be realised for the X13s. Note that the pin configuration must currently be moved to the parent i2c-bus node even though only one of these nodes will ever be successfully probed on a specific device (e.g. to allow them to be probed in parallel). Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230324094744.20448-1-johan+linaro@kernel.org
2023-03-23arm64: dts: qcom: qrb5165-rb5: Use proper WSA881x shutdown GPIO polarityKrzysztof Kozlowski
The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed DTS always comes with active high. Since Linux drivers were updated to handle proper flag, correct the DTS. The change is not backwards compatible with older Linux kernel. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322193051.826167-5-krzysztof.kozlowski@linaro.org
2023-03-23arm64: dts: qcom: sm8250-mtp: Use proper WSA881x shutdown GPIO polarityKrzysztof Kozlowski
The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed DTS always comes with active high. Since Linux drivers were updated to handle proper flag, correct the DTS. The change is not backwards compatible with older Linux kernel. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322193051.826167-4-krzysztof.kozlowski@linaro.org
2023-03-23arm64: dts: qcom: sdm850-samsung-w737: Use proper WSA881x shutdown GPIO polarityKrzysztof Kozlowski
The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed DTS always comes with active high. Since Linux drivers were updated to handle proper flag, correct the DTS. The change is not backwards compatible with older Linux kernel. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322193051.826167-3-krzysztof.kozlowski@linaro.org
2023-03-23arm64: dts: qcom: sdm850-lenovo-yoga-c630: Use proper WSA881x shutdown GPIO ↵Krzysztof Kozlowski
polarity The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed DTS always comes with active high. Since Linux drivers were updated to handle proper flag, correct the DTS. The change is not backwards compatible with older Linux kernel. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322193051.826167-2-krzysztof.kozlowski@linaro.org
2023-03-23arm64: dts: qcom: sc8280xp-pmics: fix sdam 'reg' propertyJohan Hovold
The SPMI PMIC register region width is fixed and should not be encoded in the devicetree. Fixes: d6dbbda37ab5 ("arm64: dts: qcom: sc8280xp-pmics: add pmk8280 sdam nvram") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230320135710.1989-3-johan+linaro@kernel.org
2023-03-23arm64: dts: qcom: sm8450: add dp controllerNeil Armstrong
Add the Display Port controller subnode to the MDSS node. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230206-topic-sm8450-upstream-dp-controller-v6-5-d78313cbc41d@linaro.org
2023-03-23arm64: dts: qcom: sm8450: switch to usb3/dp combo phyNeil Armstrong
The QMP PHY is a USB3/DP combo phy, switch to the newly documented bindings and register the clocks to the GCC and DISPCC controllers. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230206-topic-sm8450-upstream-dp-controller-v6-4-d78313cbc41d@linaro.org
2023-03-23arm64: dts: qcom: sm8350: add dp controllerNeil Armstrong
Add the Display Port controller subnode to the MDSS node. Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #SM8350-HDK Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230206-topic-sm8450-upstream-dp-controller-v6-3-d78313cbc41d@linaro.org
2023-03-23arm64: dts: qcom: sm8350: switch to combo usb3/dp phyNeil Armstrong
The first QMP PHY is an USB3/DP combo phy, switch to the newly documented bindings and register the clocks to the GCC and DISPCC controllers. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #SM8350-HDK Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230206-topic-sm8450-upstream-dp-controller-v6-2-d78313cbc41d@linaro.org
2023-03-23arm64: dts: qcom: sc7280: align RPMh regulator nodes with bindingsKrzysztof Kozlowski
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230217155838.848403-3-krzysztof.kozlowski@linaro.org
2023-03-23arm64: dts: qcom: sc7280-herobrine-audio-rt5682: add missing suppliesKrzysztof Kozlowski
Bindings expect DBVDD-supply and LDO1-IN-supply: sc7280-herobrine-evoker-lte.dtb: codec@1a: 'DBVDD-supply' is a required property sc7280-herobrine-evoker-lte.dtb: codec@1a: 'LDO1-IN-supply' is a required property In sc7180-trogdor.dtsi they come from the same regulator, so let's assume intention was the same here. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230217155838.848403-2-krzysztof.kozlowski@linaro.org
2023-03-23arm64: dts: qcom: sc7180-trogdor-pazquel360: drop incorrect RT5682S VBAT-supplyKrzysztof Kozlowski
It seems that the RT5682S codec does not use VBAT-supply: sc7180-trogdor-pazquel360-lte.dtb: codec@1a: Unevaluated properties are not allowed ('VBAT-supply' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230217155838.848403-1-krzysztof.kozlowski@linaro.org
2023-03-23arm64: dts: qcom: ipq5332: enable the CPUFreq supportKathiravan T
Add the APCS, A53 PLL, cpu-opp-table nodes to bump the CPU frequency above 800MHz. Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230217083308.12017-6-quic_kathirav@quicinc.com
2023-03-22arm64: dts: qcom: sc8280xp-x13s: add wifi calibration variantJohan Hovold
Describe the bus topology for PCIe domain 6 and add the ath11k calibration variant so that the board file (calibration data) can be loaded. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216246 Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230321094011.9759-3-johan+linaro@kernel.org
2023-03-22arm64: dts: qcom: sc8280xp-x13s: add hid 1.8V suppliesJohan Hovold
All the input devices use s10b as 1.8V supply. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322113318.17908-7-johan+linaro@kernel.org
2023-03-22arm64: dts: qcom: sc8280xp-x13s: add pmic regulator suppliesJohan Hovold
The s11b, s12b, s1c and bob supplies are used by several pmic regulators. Add the missing description to the devicetree. Note that there are still some consumers that are not (fully) described in the devicetree so the supplies must remain marked as always-on for now. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322113318.17908-6-johan+linaro@kernel.org
2023-03-22arm64: dts: qcom: sc8280xp-x13s: mark bob regulator as always-onJohan Hovold
The bob supply is used by several pmic regulators and components which are not (yet fully) described in the devicetree. Mark the regulator as always-on for now. Fixes: f29077d86652 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322113318.17908-5-johan+linaro@kernel.org
2023-03-22arm64: dts: qcom: sc8280xp-x13s: mark s12b regulator as always-onJohan Hovold
The s12b supply is used by several pmic regulators as well as the wlan/bluetooth radio which are not yet fully described in the devicetree. Mark the regulator as always-on for now. Fixes: f29077d86652 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322113318.17908-4-johan+linaro@kernel.org
2023-03-22arm64: dts: qcom: sc8280xp-x13s: mark s10b regulator as always-onJohan Hovold
The s10b supply is used by several components that are not (yet) described in devicetree (e.g. ram, charger, ec) and must not be disabled. Mark the regulator as always-on. Fixes: f29077d86652 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322113318.17908-3-johan+linaro@kernel.org
2023-03-22arm64: dts: qcom: sc8280xp-x13s: mark s11b regulator as always-onJohan Hovold
The s11b supply is used by the wlan module (as well as some of the pmics) which are not yet fully described in the devicetree. Mark the regulator as always-on for now. Fixes: 123b30a75623 ("arm64: dts: qcom: sc8280xp-x13s: enable WiFi controller") Cc: stable@vger.kernel.org # 6.2 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322113318.17908-2-johan+linaro@kernel.org
2023-03-21arm64: dts: qcom: sm8450-hdk: align WCD9385 reset pin with downstream configKrzysztof Kozlowski
Downstream DTS uses 16 mA drive strength for the WCD9385 audio codec RESET_N reset pin. It also pulls the pin down in shutdown mode, thus it is more like a shutdown pin, not a reset. Use the same settings here for HDK8450 and keep the WCD9385 by default in powered off (so pin as low). Align the name of pin configuration node with other pins in the DTS. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308183317.559253-2-krzysztof.kozlowski@linaro.org
2023-03-21arm64: dts: qcom: sm8450-hdk: use precise WCD9385 compatibleKrzysztof Kozlowski
The HDK8450 uses WCD9385 audio codec, so use precise compatible, even though WCD9380 and WCD9385 are both compatible. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308183317.559253-1-krzysztof.kozlowski@linaro.org
2023-03-21arm64: dts: qcom: sm8450-hdk: use recommended drive strength for speaker SD_NKrzysztof Kozlowski
Downstream DTS (and sc8280xp-lenovo-thinkpad-x13s with the same speakers) uses 16 mA drive strength for the WSA8835 speaker SD_N reset/shutdown pin. Use the same for HDK8450, as it is seem the recommended value. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308142712.277659-1-krzysztof.kozlowski@linaro.org
2023-03-21arm64: dts: qcom: sm8150: Add SoC-specific compatible to cpufreq_hwKonrad Dybcio
Add a SoC-specific compatbile to cpufreq_hw for compliancy with bindings. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308-topic-cpufreq_bindings-v1-8-3368473ec52d@linaro.org
2023-03-21arm64: dts: qcom: sm6350: Add SoC-specific compatible to cpufreq_hwKonrad Dybcio
Add a SoC-specific compatbile to cpufreq_hw for compliancy with bindings. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308-topic-cpufreq_bindings-v1-7-3368473ec52d@linaro.org
2023-03-21arm64: dts: qcom: sm6115: Add SoC-specific compatible to cpufreq_hwKonrad Dybcio
Add a SoC-specific compatbile to cpufreq_hw for compliancy with bindings. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308-topic-cpufreq_bindings-v1-6-3368473ec52d@linaro.org
2023-03-21arm64: dts: qcom: sdm845: Add SoC-specific compatible to cpufreq_hwKonrad Dybcio
Add a SoC-specific compatbile to cpufreq_hw for compliancy with bindings. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308-topic-cpufreq_bindings-v1-5-3368473ec52d@linaro.org
2023-03-21arm64: dts: qcom: sc7180: Add SoC-specific compatible to cpufreq_hwKonrad Dybcio
Add a SoC-specific compatbile to cpufreq_hw for compliancy with bindings. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308-topic-cpufreq_bindings-v1-4-3368473ec52d@linaro.org
2023-03-21arm64: dts: qcom: sdm845-oneplus-common: add Hall sensorGergo Koteles
Enable the Hall effect sensor (flip cover) for OnePlus 6/6T. The GPIO is mapped to SW_LID events as in msm8916, msm8994, msm8998 devices. Signed-off-by: Gergo Koteles <soyer@irl.hu> Reviewed-by: Caleb Connolly <caleb@connolly.tech> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230306174147.185239-1-soyer@irl.hu
2023-03-21arm64: dts: qcom: drop redundant line breaksKrzysztof Kozlowski
Remove trailing, redundant line breaks. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230306081430.28491-2-krzysztof.kozlowski@linaro.org
2023-03-21arm64: dts: qcom: sdm845-db845c: drop empty node overrideKrzysztof Kozlowski
Drop empty override of pm8998_gpios. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230306081430.28491-1-krzysztof.kozlowski@linaro.org
2023-03-21arm64: dts: qcom: pm660: align thermal node names with bindingsKrzysztof Kozlowski
Bindings expect thermal node names to end with '-thermal', so fix pm660 and pm660l: sda660-inforce-ifc6560.dtb: thermal-zones: 'pm660', 'pm660l' do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230305154308.241651-1-krzysztof.kozlowski@linaro.org
2023-03-21arm64: dts: qcom: sm8350-microsoft-surface: fix USB dual-role mode propertyKrzysztof Kozlowski
The "dr_mode" is a property of USB DWC3 node, not the Qualcomm wrapper one: sm8350-microsoft-surface-duo2.dtb: usb@a6f8800: 'dr_mode' does not match any of the regexes: '^usb@[0-9a-f]+$', 'pinctrl-[0-9]+' Fixes: c16160cfa565 ("arm64: dts: qcom: add minimal DTS for Microsoft Surface Duo 2") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230304130315.51595-2-krzysztof.kozlowski@linaro.org
2023-03-21arm64: dts: qcom: sm8250-xiaomi-elish: fix USB maximum speed propertyKrzysztof Kozlowski
Fix typo in USB DWC3 node maximum speed property. Fixes: a41b617530bf ("arm64: dts: qcom: sm8250: Add device tree for Xiaomi Mi Pad 5 Pro") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230304130315.51595-1-krzysztof.kozlowski@linaro.org
2023-03-21arm64: dts: qcom: sa8775p-ride: enable the BT UART portBartosz Golaszewski
Enable the high-speed UART port connected to the Bluetooth controller on the sa8775p-adp development board. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230309103752.173541-10-brgl@bgdev.pl
2023-03-21arm64: dts: qcom: sa8775p-ride: enable the GNSS UART portBartosz Golaszewski
Enable the high-speed UART port connected to the GNSS controller on the sa8775p-adp development board. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230309103752.173541-9-brgl@bgdev.pl
2023-03-21arm64: dts: qcom: sa8775p: add high-speed UART nodesBartosz Golaszewski
Add two UART nodes that are known to be used by existing development boards with this SoC. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230309103752.173541-8-brgl@bgdev.pl
2023-03-21arm64: dts: qcom: sa8775p-ride: enable the SPI nodeBartosz Golaszewski
Enable the SPI interface exposed on the sa8775p-ride development board. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230309103752.173541-7-brgl@bgdev.pl
2023-03-21arm64: dts: qcom: sa8775p: add the spi16 nodeBartosz Golaszewski
Add the SPI controller node for the interface exposed on the sa8775p-ride development board. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230309103752.173541-6-brgl@bgdev.pl
2023-03-21arm64: dts: qcom: sa8775p-ride: enable i2c18Bartosz Golaszewski
This enables the I2C interface on the sa8775p-ride development board. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230309103752.173541-5-brgl@bgdev.pl
2023-03-21arm64: dts: qcom: sa8775p: add the i2c18 nodeBartosz Golaszewski
Add a disabled node for the I2C interface that's exposed on the sa8775p-ride development board. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230309103752.173541-4-brgl@bgdev.pl
2023-03-21arm64: dts: qcom: sa8775p-ride: enable QUPv3 #2Bartosz Golaszewski
Enable the second instance of the QUPv3 engine on the sa8775p-ride board. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230309103752.173541-3-brgl@bgdev.pl
2023-03-21arm64: dts: qcom: sa8775p: add the QUPv3 #2 nodeBartosz Golaszewski
Add the second instance of the QUPv3 engine to the sa8775p.dtsi. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230309103752.173541-2-brgl@bgdev.pl
generated by cgit (git 2.34.1) at 2025-07-15 12:43:05 +0000