| Age | Commit message (Collapse) | Author |
|---|
|
Lee Jones says:
====================
Rid W=1 warnings in Ethernet
This set is part of a larger effort attempting to clean-up W=1
kernel builds, which are currently overwhelmingly riddled with
niggly little warnings.
v2:
- Squashed IBM patches
- Fixed real issue in SMSC
- Added Andrew's Reviewed-by tags on remainder
====================
Link: https://lore.kernel.org/r/20210115200905.3470941-1-lee.jones@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
parameters
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/toshiba/spider_net.c:263: warning: Function parameter or member 'hwdescr' not described in 'spider_net_get_descr_status'
drivers/net/ethernet/toshiba/spider_net.c:263: warning: Excess function parameter 'descr' description in 'spider_net_get_descr_status'
drivers/net/ethernet/toshiba/spider_net.c:554: warning: Function parameter or member 'netdev' not described in 'spider_net_get_multicast_hash'
drivers/net/ethernet/toshiba/spider_net.c:902: warning: Function parameter or member 't' not described in 'spider_net_cleanup_tx_ring'
drivers/net/ethernet/toshiba/spider_net.c:902: warning: Excess function parameter 'card' description in 'spider_net_cleanup_tx_ring'
drivers/net/ethernet/toshiba/spider_net.c:1074: warning: Function parameter or member 'card' not described in 'spider_net_resync_head_ptr'
drivers/net/ethernet/toshiba/spider_net.c:1234: warning: Function parameter or member 'napi' not described in 'spider_net_poll'
drivers/net/ethernet/toshiba/spider_net.c:1234: warning: Excess function parameter 'netdev' description in 'spider_net_poll'
drivers/net/ethernet/toshiba/spider_net.c:1278: warning: Function parameter or member 'p' not described in 'spider_net_set_mac'
drivers/net/ethernet/toshiba/spider_net.c:1278: warning: Excess function parameter 'ptr' description in 'spider_net_set_mac'
drivers/net/ethernet/toshiba/spider_net.c:1350: warning: Function parameter or member 'error_reg1' not described in 'spider_net_handle_error_irq'
drivers/net/ethernet/toshiba/spider_net.c:1350: warning: Function parameter or member 'error_reg2' not described in 'spider_net_handle_error_irq'
drivers/net/ethernet/toshiba/spider_net.c:1968: warning: Function parameter or member 't' not described in 'spider_net_link_phy'
drivers/net/ethernet/toshiba/spider_net.c:1968: warning: Excess function parameter 'data' description in 'spider_net_link_phy'
drivers/net/ethernet/toshiba/spider_net.c:2149: warning: Function parameter or member 'work' not described in 'spider_net_tx_timeout_task'
drivers/net/ethernet/toshiba/spider_net.c:2149: warning: Excess function parameter 'data' description in 'spider_net_tx_timeout_task'
drivers/net/ethernet/toshiba/spider_net.c:2182: warning: Function parameter or member 'txqueue' not described in 'spider_net_tx_timeout'
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/toshiba/ps3_gelic_net.c:1107: warning: Function parameter or member 'irq' not described in 'gelic_card_interrupt'
drivers/net/ethernet/toshiba/ps3_gelic_net.c:1107: warning: Function parameter or member 'ptr' not described in 'gelic_card_interrupt'
drivers/net/ethernet/toshiba/ps3_gelic_net.c:1407: warning: Function parameter or member 'txqueue' not described in 'gelic_net_tx_timeout'
drivers/net/ethernet/toshiba/ps3_gelic_net.c:1439: warning: Function parameter or member 'napi' not described in 'gelic_ether_setup_netdev_ops'
drivers/net/ethernet/toshiba/ps3_gelic_net.c:1639: warning: Function parameter or member 'dev' not described in 'ps3_gelic_driver_probe'
drivers/net/ethernet/toshiba/ps3_gelic_net.c:1795: warning: Function parameter or member 'dev' not described in 'ps3_gelic_driver_remove'
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fixes the following W=1 kernel build warning(s):
from drivers/net/ethernet/ibm/ibmvnic.c:35:
inlined from ‘handle_vpd_rsp’ at drivers/net/ethernet/ibm/ibmvnic.c:4124:3:
drivers/net/ethernet/ibm/ibmvnic.c:1362: warning: Function parameter or member 'hdr_field' not described in 'build_hdr_data'
drivers/net/ethernet/ibm/ibmvnic.c:1362: warning: Function parameter or member 'skb' not described in 'build_hdr_data'
drivers/net/ethernet/ibm/ibmvnic.c:1362: warning: Function parameter or member 'hdr_len' not described in 'build_hdr_data'
drivers/net/ethernet/ibm/ibmvnic.c:1362: warning: Function parameter or member 'hdr_data' not described in 'build_hdr_data'
drivers/net/ethernet/ibm/ibmvnic.c:1423: warning: Function parameter or member 'hdr_field' not described in 'create_hdr_descs'
drivers/net/ethernet/ibm/ibmvnic.c:1423: warning: Function parameter or member 'hdr_data' not described in 'create_hdr_descs'
drivers/net/ethernet/ibm/ibmvnic.c:1423: warning: Function parameter or member 'len' not described in 'create_hdr_descs'
drivers/net/ethernet/ibm/ibmvnic.c:1423: warning: Function parameter or member 'hdr_len' not described in 'create_hdr_descs'
drivers/net/ethernet/ibm/ibmvnic.c:1423: warning: Function parameter or member 'scrq_arr' not described in 'create_hdr_descs'
drivers/net/ethernet/ibm/ibmvnic.c:1474: warning: Function parameter or member 'txbuff' not described in 'build_hdr_descs_arr'
drivers/net/ethernet/ibm/ibmvnic.c:1474: warning: Function parameter or member 'num_entries' not described in 'build_hdr_descs_arr'
drivers/net/ethernet/ibm/ibmvnic.c:1474: warning: Function parameter or member 'hdr_field' not described in 'build_hdr_descs_arr'
drivers/net/ethernet/ibm/ibmvnic.c:1832: warning: Function parameter or member 'adapter' not described in 'do_change_param_reset'
drivers/net/ethernet/ibm/ibmvnic.c:1832: warning: Function parameter or member 'rwi' not described in 'do_change_param_reset'
drivers/net/ethernet/ibm/ibmvnic.c:1832: warning: Function parameter or member 'reset_state' not described in 'do_change_param_reset'
drivers/net/ethernet/ibm/ibmvnic.c:1911: warning: Function parameter or member 'adapter' not described in 'do_reset'
drivers/net/ethernet/ibm/ibmvnic.c:1911: warning: Function parameter or member 'rwi' not described in 'do_reset'
drivers/net/ethernet/ibm/ibmvnic.c:1911: warning: Function parameter or member 'reset_state' not described in 'do_reset'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/ti/am65-cpts.c:736: warning: Function parameter or member 'en' not described in 'am65_cpts_rx_enable'
drivers/net/ethernet/ti/am65-cpts.c:736: warning: Excess function parameter 'skb' description in 'am65_cpts_rx_enable'
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/ti/am65-cpsw-qos.c:364: warning: Function parameter or member 'ndev' not described in 'am65_cpsw_timer_set'
drivers/net/ethernet/ti/am65-cpsw-qos.c:364: warning: Function parameter or member 'est_new' not described in 'am65_cpsw_timer_set'
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/net/xen-netback/xenbus.c:419: warning: Function parameter or member 'dev' not described in 'frontend_changed'
drivers/net/xen-netback/xenbus.c:419: warning: Function parameter or member 'frontend_state' not described in 'frontend_changed'
drivers/net/xen-netback/xenbus.c:1001: warning: Function parameter or member 'dev' not described in 'netback_probe'
drivers/net/xen-netback/xenbus.c:1001: warning: Function parameter or member 'id' not described in 'netback_probe'
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/smsc/smc91x.c:2200: warning: Function parameter or member 'dev' not described in 'try_toggle_control_gpio'
drivers/net/ethernet/smsc/smc91x.c:2200: warning: Function parameter or member 'desc' not described in 'try_toggle_control_gpio'
drivers/net/ethernet/smsc/smc91x.c:2200: warning: Function parameter or member 'name' not described in 'try_toggle_control_gpio'
drivers/net/ethernet/smsc/smc91x.c:2200: warning: Function parameter or member 'index' not described in 'try_toggle_control_gpio'
drivers/net/ethernet/smsc/smc91x.c:2200: warning: Function parameter or member 'value' not described in 'try_toggle_control_gpio'
drivers/net/ethernet/smsc/smc91x.c:2200: warning: Function parameter or member 'nsdelay' not described in 'try_toggle_control_gpio'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Nine minor fixes, seven in drivers and two in the core SCSI disk
driver (sd) which should be harmless involving removing an unused
variable and quietening a spurious warning"
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Remove obsolete variable in sd_remove()
scsi: sd: Suppress spurious errors when WRITE SAME is being disabled
scsi: scsi_debug: Fix memleak in scsi_debug_init()
scsi: mpt3sas: Fix spelling mistake in Kconfig "compatiblity" -> "compatibility"
scsi: qedi: Correct max length of CHAP secret
scsi: ufs: Correct the LUN used in eh_device_reset_handler() callback
scsi: ufs: Relocate flush of exceptional event
scsi: ufs: Relax the condition of UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL
scsi: ufs: Fix possible power drain during system suspend
|
|
We are not guaranteed the locking environment that would prevent
dentry getting renamed right under us. And it's possible for
old long name to be freed after rename, leading to UAF here.
Cc: stable@kernel.org # v2.6.2+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Pull block fixes from Jens Axboe:
"Just an nvme pull request via Christoph:
- don't initialize hwmon for discover controllers (Sagi Grimberg)
- fix iov_iter handling in nvme-tcp (Sagi Grimberg)
- fix a preempt warning in nvme-tcp (Sagi Grimberg)
- fix a possible NULL pointer dereference in nvme (Israel Rukshin)"
* tag 'block-5.11-2021-01-16' of git://git.kernel.dk/linux-block:
nvme: don't intialize hwmon for discovery controllers
nvme-tcp: fix possible data corruption with bio merges
nvme-tcp: Fix warning with CONFIG_DEBUG_PREEMPT
nvmet-rdma: Fix NULL deref when setting pi_enable and traddr INADDR_ANY
|
|
Pull io_uring fixes from Jens Axboe:
"We still have a pending fix for a cancelation issue, but it's still
being investigated. In the meantime:
- Dead mm handling fix (Pavel)
- SQPOLL setup error handling (Pavel)
- Flush timeout sequence fix (Marcelo)
- Missing finish_wait() for one exit case"
* tag 'io_uring-5.11-2021-01-16' of git://git.kernel.dk/linux-block:
io_uring: ensure finish_wait() is always called in __io_uring_task_cancel()
io_uring: flush timeouts that should already have expired
io_uring: do sqo disable on install_fd error
io_uring: fix null-deref in io_disable_sqo_submit
io_uring: don't take files/mm for a dead task
io_uring: drop mm and files after task_work_run
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"There are a few more fixes than a normal rc4, largely due to the
bubble introduced by the holiday break:
- return -ENOSYS for syscall number -1, which previously returned an
uninitialized value.
- ensure of_clk_init() has been called in time_init(), without which
clock drivers may not be initialized.
- fix sifive,uart0 driver to properly display the baud rate. A fix to
initialize MPIE that allows interrupts to be processed during
system calls.
- avoid erronously begin tracing IRQs when interrupts are disabled,
which at least triggers suprious lockdep failures.
- workaround for a warning related to calling smp_processor_id()
while preemptible. The warning itself is suprious on currently
availiable systems.
- properly include the generic time VDSO calls. A fix to our kasan
address mapping. A fix to the HiFive Unleashed device tree, which
allows the Ethernet PHY to be properly initialized by Linux (as
opposed to relying on the bootloader).
- defconfig update to include SiFive's GPIO driver, which is present
on the HiFive Unleashed and necessary to initialize the PHY.
- avoid allocating memory while initializing reserved memory.
- avoid allocating the last 4K of memory, as pointers there alias
with syscall errors.
There are also two cleanups that should have no functional effect but
do fix build warnings:
- drop a duplicated definition of PAGE_KERNEL_EXEC.
- properly declare the asm register SP shim.
- cleanup the rv32 memory size Kconfig entry, to reflect the actual
size of memory availiable"
* tag 'riscv-for-linus-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Fix maximum allowed phsyical memory for RV32
RISC-V: Set current memblock limit
RISC-V: Do not allocate memblock while iterating reserved memblocks
riscv: stacktrace: Move register keyword to beginning of declaration
riscv: defconfig: enable gpio support for HiFive Unleashed
dts: phy: add GPIO number and active state used for phy reset
dts: phy: fix missing mdio device and probe failure of vsc8541-01 device
riscv: Fix KASAN memory mapping.
riscv: Fixup CONFIG_GENERIC_TIME_VSYSCALL
riscv: cacheinfo: Fix using smp_processor_id() in preemptible
riscv: Trace irq on only interrupt is enabled
riscv: Drop a duplicated PAGE_KERNEL_EXEC
riscv: Enable interrupts during syscalls with M-Mode
riscv: Fix sifive serial driver
riscv: Fix kernel time_init()
riscv: return -ENOSYS for syscall -1
|
|
Turning a pinned page read-only breaks the pinning after COW. Don't do it.
The whole "track page soft dirty" state doesn't work with pinned pages
anyway, since the page might be dirtied by the pinning entity without
ever being noticed in the page tables.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Turning page table entries read-only requires the mmap_sem held for
writing.
So stop doing the odd games with turning things from read locks to write
locks and back. Just get the write lock.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Linux kernel can only map 1GB of address space for RV32 as the page offset
is set to 0xC0000000. The current description in the Kconfig is confusing
as it indicates that RV32 can support 2GB of physical memory. That is
simply not true for current kernel. In future, a 2GB split support can be
added to allow 2GB physical address space.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Currently, linux kernel can not use last 4k bytes of addressable space
because IS_ERR_VALUE macro treats those as an error. This will be an issue
for RV32 as any memblock allocator potentially allocate chunk of memory
from the end of DRAM (2GB) leading bad address error even though the
address was technically valid.
Fix this issue by limiting the memblock if available memory spans the
entire address space.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Currently, resource tree allocates memory blocks while iterating on the
list. It leads to following kernel warning because memblock allocation
also invokes memory block reservation API.
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/resource.c:795
__insert_resource+0x8e/0xd0
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted
5.10.0-00022-ge20097fb37e2-dirty #549
[ 0.000000] epc: c00125c2 ra : c001262c sp : c1c01f50
[ 0.000000] gp : c1d456e0 tp : c1c0a980 t0 : ffffcf20
[ 0.000000] t1 : 00000000 t2 : 00000000 s0 : c1c01f60
[ 0.000000] s1 : ffffcf00 a0 : ffffff00 a1 : c1c0c0c4
[ 0.000000] a2 : 80c12b15 a3 : 80402000 a4 : 80402000
[ 0.000000] a5 : c1c0c0c4 a6 : 80c12b15 a7 : f5faf600
[ 0.000000] s2 : c1c0c0c4 s3 : c1c0e000 s4 : c1009a80
[ 0.000000] s5 : c1c0c000 s6 : c1d48000 s7 : c1613b4c
[ 0.000000] s8 : 00000fff s9 : 80000200 s10: c1613b40
[ 0.000000] s11: 00000000 t3 : c1d4a000 t4 : ffffffff
This is also unnecessary as we can pre-compute the total memblocks required
for each memory region and allocate it before the loop. It save precious
boot time not going through memblock allocation code every time.
Fixes: 00ab027a3b82 ("RISC-V: Add kernel image sections to the resource tree")
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Following patch add support for flow based tunneling API
to send and recv GTP tunnel packet over tunnel metadata API.
This would allow this device integration with OVS or eBPF using
flow based tunneling APIs.
Signed-off-by: Pravin B Shelar <pbshelar@fb.com>
Link: https://lore.kernel.org/r/20210110070021.26822-1-pbshelar@fb.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In bictcp_reset(), use memset and offsetof instead of = 0.
Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Link: https://lore.kernel.org/r/1610597696-128610-1-git-send-email-yejune.deng@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace some checks for ETH_P_8021Q and ETH_P_8021AD in
drivers/net/tap.c with eth_type_vlan.
Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
Link: https://lore.kernel.org/r/20210115023238.4681-1-dong.menglong@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the struct member w of the struct urelease_work directly instead of
casting it.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Link: https://lore.kernel.org/r/f0ed86d6d54ac0834bd2e161d172bf7bb5647cf7.1610683862.git.geliangtang@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'configuring-congestion-watermarks-on-ocelot-switch-using-devlink-sb'
Vladimir Oltean says:
====================
Configuring congestion watermarks on ocelot switch using devlink-sb
In some applications, it is important to create resource reservations in
the Ethernet switches, to prevent background traffic, or deliberate
attacks, from inducing denial of service into the high-priority traffic.
These patches give the user some knobs to turn. The ocelot switches
support per-port and per-port-tc reservations, on ingress and on egress.
The resources that are monitored are packet buffers (in cells of 60
bytes each) and frame references.
The frames that exceed the reservations can optionally consume from
sharing watermarks which are not per-port but global across the switch.
There are 10 sharing watermarks, 8 of them are per traffic class and 2
are per drop priority.
I am configuring the hardware using the best of my knowledge, and mostly
through trial and error. Same goes for devlink-sb integration. Feedback
is welcome.
====================
Link: https://lore.kernel.org/r/20210115021120.3055988-1-olteanv@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using devlink-sb, we can configure 12/16 (the important 75%) of the
switch's controlling watermarks for congestion drops, and we can monitor
50% of the watermark occupancies (we can monitor the reservation
watermarks, but not the sharing watermarks, which are exposed as pool
sizes).
The following definitions can be made:
SB_BUF=0 # The devlink-sb for frame buffers
SB_REF=1 # The devlink-sb for frame references
POOL_ING=0 # The pool for ingress traffic. Both devlink-sb instances
# have one of these.
POOL_EGR=1 # The pool for egress traffic. Both devlink-sb instances
# have one of these.
Editing the hardware watermarks is done in the following way:
BUF_xxxx_I is accessed when sb=$SB_BUF and pool=$POOL_ING
REF_xxxx_I is accessed when sb=$SB_REF and pool=$POOL_ING
BUF_xxxx_E is accessed when sb=$SB_BUF and pool=$POOL_EGR
REF_xxxx_E is accessed when sb=$SB_REF and pool=$POOL_EGR
Configuring the sharing watermarks for COL_SHR(dp=0) is done implicitly
by modifying the corresponding pool size. By default, the pool size has
maximum size, so this can be skipped.
devlink sb pool set pci/0000:00:00.5 sb $SB_BUF pool $POOL_ING \
size 129840 thtype static
Since by default there is no buffer reservation, the above command has
maxed out BUF_COL_SHR_I(dp=0).
Configuring the per-port reservation watermark (P_RSRV) is done in the
following way:
devlink sb port pool set pci/0000:00:00.5/0 sb $SB_BUF \
pool $POOL_ING th 1000
The above command sets BUF_P_RSRV_I(port 0) to 1000 bytes. After this
command, the sharing watermarks are internally reconfigured with 1000
bytes less, i.e. from 129840 bytes to 128840 bytes.
Configuring the per-port-tc reservation watermarks (Q_RSRV) is done in
the following way:
for tc in {0..7}; do
devlink sb tc bind set pci/0000:00:00.5/0 sb 0 tc $tc \
type ingress pool $POOL_ING \
th 3000
done
The above command sets BUF_Q_RSRV_I(port 0, tc 0..7) to 3000 bytes.
The sharing watermarks are again reconfigured with 24000 bytes less.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is meant to be a gentle introduction into the world of watermarks
on ocelot. The code is placed in ocelot_devlink.c because it will be
integrated with devlink, even if it isn't right now.
My first step was intended to be to replicate the default configuration
of the congestion watermarks programatically, since they are now going
to be tuned by the user.
But after studying and understanding through trial and error how they
work, I now believe that the configuration used out of reset does not do
justice to the word "reservation", since the sum of all reservations
exceeds the total amount of resources (otherwise said, all reservations
cannot be fulfilled at the same time, which means that, contrary to the
reference manual, they don't guarantee anything).
As an example, here's a dump of the reservation watermarks for frame
buffers, for port 0 (for brevity, the ports 1-6 were omitted, but they
have the same configuration):
BUF_Q_RSRV_I(port 0, prio 0) = max 3000 bytes
BUF_Q_RSRV_I(port 0, prio 1) = max 3000 bytes
BUF_Q_RSRV_I(port 0, prio 2) = max 3000 bytes
BUF_Q_RSRV_I(port 0, prio 3) = max 3000 bytes
BUF_Q_RSRV_I(port 0, prio 4) = max 3000 bytes
BUF_Q_RSRV_I(port 0, prio 5) = max 3000 bytes
BUF_Q_RSRV_I(port 0, prio 6) = max 3000 bytes
BUF_Q_RSRV_I(port 0, prio 7) = max 3000 bytes
Otherwise said, every port-tc has an ingress reservation of 3000 bytes,
and there are 7 ports in VSC9959 Felix (6 user ports and 1 CPU port).
Concentrating only on the ingress reservations, there are, in total,
8 [traffic classes] x 7 [ports] x 3000 [bytes] = 168,000 bytes of memory
reserved on ingress.
But, surprise, Felix only has 128 KB of packet buffer in total...
A similar thing happens with Seville, which has a larger packet buffer,
but also more ports, and the default configuration is also overcommitted.
This patch disables the (apparently) bogus reservations and moves all
resources to the shared area. This way, real reservations can be set up
by the user, using devlink-sb.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add devlink integration into the mscc_ocelot switchdev driver. All
physical ports (i.e. the unused ones as well) except the CPU port module
at ocelot->num_phys_ports are registered with devlink, and that requires
keeping the devlink_port structure outside struct ocelot_port_private,
since the latter has a 1:1 mapping with a struct net_device (which does
not exist for unused ports).
Since we use devlink_port_type_eth_set to link the devlink port to the
net_device, we can as well remove the .ndo_get_phys_port_name and
.ndo_get_port_parent_id implementations, since devlink takes care of
retrieving the port name and number automatically, once
.ndo_get_devlink_port is implemented.
Note that the felix DSA driver is already integrated with devlink by
default, since that is a thing that the DSA core takes care of. This is
the reason why these devlink stubs were put in ocelot_net.c and not in
the common library. It is also the reason why ocelot::devlink is a
pointer and not a full structure embedded inside struct ocelot: because
the mscc_ocelot driver allocates that by itself (as the container of
struct ocelot, in fact), but in the case of felix, it is DSA who
allocates the devlink, and felix just propagates the pointer towards
struct ocelot.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is a leftover of commit 69df578c5f4b ("net: mscc: ocelot: eliminate
confusion between CPU and NPI port") which renamed that function.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We should be moving anything that isn't DSA-specific or SoC-specific out
of the felix DSA driver, and into the common mscc_ocelot switch library.
The number of traffic classes is one of the aspects that is common
between all ocelot switches, so it belongs in the library.
This patch also makes seville use 8 TX queues, and therefore enables
prioritization via the QOS_CLASS field in the NPI injection header.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In general it is desirable that cleanup is the reverse process of setup.
In this case I am not seeing any particular issue, but with the
introduction of devlink-sb for felix, a non-obvious decision had to be
made as to where to put its cleanup method. When there's a convention in
place, that decision becomes obvious.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The devlink function pointer names are super long, and they would break
the alignment. So reindent the existing ops now by adding one tab.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Switches that care about QoS might have hardware support for reserving
buffer pools for individual ports or traffic classes, and configuring
their sizes and thresholds. Through devlink-sb (shared buffers), this is
all configurable, as well as their occupancy being viewable.
Add the plumbing in DSA for these operations.
Individual drivers still need to call devlink_sb_register() with the
shared buffers they want to expose. A helper was not created in DSA for
this purpose (unlike, say, dsa_devlink_params_register), since in my
opinion it does not bring any benefit over plainly calling
devlink_sb_register() directly.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We'll need to read back the watermark thresholds and occupancy from
hardware (for devlink-sb integration), not only to write them as we did
so far in ocelot_port_set_maxlen. So introduce 2 new functions in struct
ocelot_ops, similar to wm_enc, and implement them for the 3 supported
mscc_ocelot switches.
Remove the INUSE and MAXUSE unpacking helpers for the QSYS_RES_STAT
register, because that doesn't scale with the number of switches that
mscc_ocelot supports now. They have different bit widths for the
watermarks, and we need function pointers to abstract that difference
away.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of reading these values from the reference manual and writing
them down into the driver, it appears that the hardware gives us the
option of detecting them dynamically.
The number of frame references corresponds to what the reference manual
notes, however it seems that the frame buffers are reported as slightly
less than the books would indicate. On VSC9959 (Felix), the books say it
should have 128KB of packet buffer, but the registers indicate only
129840 bytes (126.79 KB). Also, the unit of measurement for FREECNT from
the documentation of all these devices is incorrect (taken from an older
generation). This was confirmed by Younes Leroul from Microchip support.
Not having anything better to do with these values at the moment* (this
will change soon), let's just print them.
*The frame buffer size is, in fact, used to calculate the tail dropping
watermarks.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sizeof needs to be called on the compat pointer, not the native one.
Fixes: 89cd35c58bc2 ("iov_iter: transparently handle compat iovecs in import_iovec")
Reported-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
tc_index being 16bit wide, we need to check that TCA_TCINDEX_SHIFT
attribute is not silly.
UBSAN: shift-out-of-bounds in net/sched/cls_tcindex.c:260:29
shift exponent 255 is too large for 32-bit type 'int'
CPU: 0 PID: 8516 Comm: syz-executor228 Not tainted 5.10.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x107/0x163 lib/dump_stack.c:120
ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
__ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395
valid_perfect_hash net/sched/cls_tcindex.c:260 [inline]
tcindex_set_parms.cold+0x1b/0x215 net/sched/cls_tcindex.c:425
tcindex_change+0x232/0x340 net/sched/cls_tcindex.c:546
tc_new_tfilter+0x13fb/0x21b0 net/sched/cls_api.c:2127
rtnetlink_rcv_msg+0x8b6/0xb80 net/core/rtnetlink.c:5555
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494
netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1330
netlink_sendmsg+0x907/0xe40 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:672
____sys_sendmsg+0x6e8/0x810 net/socket.c:2336
___sys_sendmsg+0xf3/0x170 net/socket.c:2390
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2423
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20210114185229.1742255-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot report reminded us that very big ewma_log were supported in the past,
even if they made litle sense.
tc qdisc replace dev xxx root est 1sec 131072sec ...
While fixing the bug, also add boundary checks for ewma_log, in line
with range supported by iproute2.
UBSAN: shift-out-of-bounds in net/core/gen_estimator.c:83:38
shift exponent -1 is negative
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x107/0x163 lib/dump_stack.c:120
ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
__ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395
est_timer.cold+0xbb/0x12d net/core/gen_estimator.c:83
call_timer_fn+0x1a5/0x710 kernel/time/timer.c:1417
expire_timers kernel/time/timer.c:1462 [inline]
__run_timers.part.0+0x692/0xa80 kernel/time/timer.c:1731
__run_timers kernel/time/timer.c:1712 [inline]
run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1744
__do_softirq+0x2bc/0xa77 kernel/softirq.c:343
asm_call_irq_on_stack+0xf/0x20
</IRQ>
__run_on_irqstack arch/x86/include/asm/irq_stack.h:26 [inline]
run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:77 [inline]
do_softirq_own_stack+0xaa/0xd0 arch/x86/kernel/irq_64.c:77
invoke_softirq kernel/softirq.c:226 [inline]
__irq_exit_rcu+0x17f/0x200 kernel/softirq.c:420
irq_exit_rcu+0x5/0x20 kernel/softirq.c:432
sysvec_apic_timer_interrupt+0x4d/0x100 arch/x86/kernel/apic/apic.c:1096
asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:628
RIP: 0010:native_save_fl arch/x86/include/asm/irqflags.h:29 [inline]
RIP: 0010:arch_local_save_flags arch/x86/include/asm/irqflags.h:79 [inline]
RIP: 0010:arch_irqs_disabled arch/x86/include/asm/irqflags.h:169 [inline]
RIP: 0010:acpi_safe_halt drivers/acpi/processor_idle.c:111 [inline]
RIP: 0010:acpi_idle_do_entry+0x1c9/0x250 drivers/acpi/processor_idle.c:516
Fixes: 1c0d32fde5bd ("net_sched: gen_estimator: complete rewrite of rate estimators")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20210114181929.1717985-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
iproute2 probably never goes beyond 8 for the cell exponent,
but stick to the max shift exponent for signed 32bit.
UBSAN reported:
UBSAN: shift-out-of-bounds in net/sched/sch_api.c:389:22
shift exponent 130 is too large for 32-bit type 'int'
CPU: 1 PID: 8450 Comm: syz-executor586 Not tainted 5.11.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x183/0x22e lib/dump_stack.c:120
ubsan_epilogue lib/ubsan.c:148 [inline]
__ubsan_handle_shift_out_of_bounds+0x432/0x4d0 lib/ubsan.c:395
__detect_linklayer+0x2a9/0x330 net/sched/sch_api.c:389
qdisc_get_rtab+0x2b5/0x410 net/sched/sch_api.c:435
cbq_init+0x28f/0x12c0 net/sched/sch_cbq.c:1180
qdisc_create+0x801/0x1470 net/sched/sch_api.c:1246
tc_modify_qdisc+0x9e3/0x1fc0 net/sched/sch_api.c:1662
rtnetlink_rcv_msg+0xb1d/0xe60 net/core/rtnetlink.c:5564
netlink_rcv_skb+0x1f0/0x460 net/netlink/af_netlink.c:2494
netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
netlink_unicast+0x7de/0x9b0 net/netlink/af_netlink.c:1330
netlink_sendmsg+0xaa6/0xe90 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg net/socket.c:672 [inline]
____sys_sendmsg+0x5a2/0x900 net/socket.c:2345
___sys_sendmsg net/socket.c:2399 [inline]
__sys_sendmsg+0x319/0x400 net/socket.c:2432
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20210114160637.1660597-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM-raid's raid1 discard limits so discards work.
- Select missing Kconfig dependencies for DM integrity and zoned
targets.
- Four fixes for DM crypt target's support to optionally bypass kcryptd
workqueues.
- Fix DM snapshot merge supports missing data flushes before committing
metadata.
- Fix DM integrity data device flushing when external metadata is used.
- Fix DM integrity's maximum number of supported constructor arguments
that user can request when creating an integrity device.
- Eliminate DM core ioctl logging noise when an ioctl is issued without
required CAP_SYS_RAWIO permission.
* tag 'for-5.11/dm-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm crypt: defer decryption to a tasklet if interrupts disabled
dm integrity: fix the maximum number of arguments
dm crypt: do not call bio_endio() from the dm-crypt tasklet
dm integrity: fix flush with external metadata device
dm: eliminate potential source of excessive kernel log noise
dm snapshot: flush merged data before committing metadata
dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq
dm crypt: do not wait for backlogged crypto request completion in softirq
dm zoned: select CONFIG_CRC32
dm integrity: select CRYPTO_SKCIPHER
dm raid: fix discard limits for raid1
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-01-16
1) Extend atomic operations to the BPF instruction set along with x86-64 JIT support,
that is, atomic{,64}_{xchg,cmpxchg,fetch_{add,and,or,xor}}, from Brendan Jackman.
2) Add support for using kernel module global variables (__ksym externs in BPF
programs) retrieved via module's BTF, from Andrii Nakryiko.
3) Generalize BPF stackmap's buildid retrieval and add support to have buildid
stored in mmap2 event for perf, from Jiri Olsa.
4) Various fixes for cross-building BPF sefltests out-of-tree which then will
unblock wider automated testing on ARM hardware, from Jean-Philippe Brucker.
5) Allow to retrieve SOL_SOCKET opts from sock_addr progs, from Daniel Borkmann.
6) Clean up driver's XDP buffer init and split into two helpers to init per-
descriptor and non-changing fields during processing, from Lorenzo Bianconi.
7) Minor misc improvements to libbpf & bpftool, from Ian Rogers.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (41 commits)
perf: Add build id data in mmap2 event
bpf: Add size arg to build_id_parse function
bpf: Move stack_map_get_build_id into lib
bpf: Document new atomic instructions
bpf: Add tests for new BPF atomic operations
bpf: Add bitwise atomic instructions
bpf: Pull out a macro for interpreting atomic ALU operations
bpf: Add instructions for atomic_[cmp]xchg
bpf: Add BPF_FETCH field / create atomic_fetch_add instruction
bpf: Move BPF_STX reserved field check into BPF_STX verifier code
bpf: Rename BPF_XADD and prepare to encode other atomics in .imm
bpf: x86: Factor out a lookup table for some ALU opcodes
bpf: x86: Factor out emission of REX byte
bpf: x86: Factor out emission of ModR/M for *(reg + off)
tools/bpftool: Add -Wall when building BPF programs
bpf, libbpf: Avoid unused function warning on bpf_tail_call_static
selftests/bpf: Install btf_dump test cases
selftests/bpf: Fix installation of urandom_read
selftests/bpf: Move generated test files to $(TEST_GEN_FILES)
selftests/bpf: Fix out-of-tree build
...
====================
Link: https://lore.kernel.org/r/20210116012922.17823-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Defining DEBUG should only be done in development.
So remove DEBUG.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20210115153128.131026-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Defining DEBUG should only be done in development.
So remove DEBUG.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20210114212917.48174-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Defining DEBUG should only be done in development.
So remove DEBUG.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20210113215603.1721958-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As explained in commit 54a0ed0df496 ("net: dsa: provide an option for
drivers to always receive bridge VLANs"), DSA has historically been
skipping VLAN switchdev operations when the bridge wasn't in
vlan_filtering mode, but the reason why it was doing that has never been
clear. So the configure_vlan_while_not_filtering option is there merely
to preserve functionality for existing drivers. It isn't some behavior
that drivers should opt into. Ideally, when all drivers leave this flag
set, we can delete the dsa_port_skip_vlan_configuration() function.
New drivers always seem to omit setting this flag, for some reason. So
let's reverse the logic: the DSA core sets it by default to true before
the .setup() callback, and legacy drivers can turn it off. This way, new
drivers get the new behavior by default, unless they explicitly set the
flag to false, which is more obvious during review.
Remove the assignment from drivers which were setting it to true, and
add the assignment to false for the drivers that didn't previously have
it. This way, it should be easier to see how many we have left.
The following drivers: lan9303, mv88e6060 were skipped from setting this
flag to false, because they didn't have any VLAN offload ops in the
first place.
The Broadcom Starfighter 2 driver calls the common b53_switch_alloc and
therefore also inherits the configure_vlan_while_not_filtering=true
behavior.
Also, print a message through netlink extack every time a VLAN has been
skipped. This is mildly annoying on purpose, so that (a) it is at least
clear that VLANs are being skipped - the legacy behavior in itself is
confusing, and the extack should be much more difficult to miss, unlike
kernel logs - and (b) people have one more incentive to convert to the
new behavior.
No behavior change except for the added prints is intended at this time.
$ ip link add br0 type bridge vlan_filtering 0
$ ip link set sw0p2 master br0
[ 60.315148] br0: port 1(sw0p2) entered blocking state
[ 60.320350] br0: port 1(sw0p2) entered disabled state
[ 60.327839] device sw0p2 entered promiscuous mode
[ 60.334905] br0: port 1(sw0p2) entered blocking state
[ 60.340142] br0: port 1(sw0p2) entered forwarding state
Warning: dsa_core: skipping configuration of VLAN. # This was the pvid
$ bridge vlan add dev sw0p2 vid 100
Warning: dsa_core: skipping configuration of VLAN.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210115231919.43834-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The wrappers in include/linux/pci-dma-compat.h should go away.
The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.
When memory is allocated in 'netxen_get_minidump_template()' GFP_KERNEL can
be used because its only caller, ' netxen_setup_minidump(()' already uses
it and no lock is acquired in the between.
When memory is allocated in other function in 'netxen_nic_ctx.c' GFP_KERNEL
can be used because the call chain already uses GFP_KERNEL and no lock is
taken in the between.
The call chain is:
netxen_nic_attach()
--> netxen_alloc_sw_resources() : already uses GFP_KERNEL
--> netxen_alloc_hw_resources()
--> nx_fw_cmd_create_rx_ctx()
--> nx_fw_cmd_create_tx_ctx()
When memory is allocated in 'netxen_init_dummy_dma()' GFP_KERNEL can be
used because its only call chain already uses it and no lock is acquired in
the between.
The call chain is:
--> netxen_start_firmware
--> netxen_request_firmware()
--> request_firmware()
--> _request_firmware(()
--> fw_get_filesystem_firmware()
--> __getname() : already uses GFP_KERNEL
--> netxen_init_dummy_dma()
@@
@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL
@@
@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
@@
@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
@@
@@
- PCI_DMA_NONE
+ DMA_NONE
@@
expression e1, e2, e3;
@@
- pci_alloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3;
@@
- pci_zalloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3, e4;
@@
- pci_free_consistent(e1, e2, e3, e4)
+ dma_free_coherent(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_single(e1, e2, e3, e4)
+ dma_map_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_single(e1, e2, e3, e4)
+ dma_unmap_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4, e5;
@@
- pci_map_page(e1, e2, e3, e4, e5)
+ dma_map_page(&e1->dev, e2, e3, e4, e5)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_page(e1, e2, e3, e4)
+ dma_unmap_page(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_sg(e1, e2, e3, e4)
+ dma_map_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_sg(e1, e2, e3, e4)
+ dma_unmap_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+ dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_device(e1, e2, e3, e4)
+ dma_sync_single_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+ dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+ dma_sync_sg_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2;
@@
- pci_dma_mapping_error(e1, e2)
+ dma_mapping_error(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_dma_mask(e1, e2)
+ dma_set_mask(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_consistent_dma_mask(e1, e2)
+ dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20210113202519.487672-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-01-16
1) Fix a double bpf_prog_put() for BPF_PROG_{TYPE_EXT,TYPE_TRACING} types in
link creation's error path causing a refcount underflow, from Jiri Olsa.
2) Fix BTF validation errors for the case where kernel modules don't declare
any new types and end up with an empty BTF, from Andrii Nakryiko.
3) Fix BPF local storage helpers to first check their {task,inode} owners for
being NULL before access, from KP Singh.
4) Fix a memory leak in BPF setsockopt handling for the case where optlen is
zero and thus temporary optval buffer should be freed, from Stanislav Fomichev.
5) Fix a syzbot memory allocation splat in BPF_PROG_TEST_RUN infra for
raw_tracepoint caused by too big ctx_size_in, from Song Liu.
6) Fix LLVM code generation issues with verifier where PTR_TO_MEM{,_OR_NULL}
registers were spilled to stack but not recognized, from Gilad Reti.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
MAINTAINERS: Update my email address
selftests/bpf: Add verifier test for PTR_TO_MEM spill
bpf: Support PTR_TO_MEM{,_OR_NULL} register spilling
bpf: Reject too big ctx_size_in for raw_tp test run
libbpf: Allow loading empty BTFs
bpf: Allow empty module BTFs
bpf: Don't leak memory in bpf getsockopt when optlen == 0
bpf: Update local storage test to check handling of null ptrs
bpf: Fix typo in bpf_inode_storage.c
bpf: Local storage helpers should check nullness of owner ptr passed
bpf: Prevent double bpf_prog_put call from bpf_tracing_prog_attach
====================
Link: https://lore.kernel.org/r/20210116002025.15706-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tobias Waldekranz says:
====================
net: dsa: mv88e6xxx: LAG fixes
The kernel test robot kindly pointed out that Global 2 support in
mv88e6xxx is optional.
This also made me realize that we should verify that the hardware
actually supports LAG offloading before trying to configure it.
====================
Link: https://lore.kernel.org/r/20210115125259.22542-1-tobias@waldekranz.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are chips that do have Global 2 registers, and therefore trunk
mapping/mask tables are not available. Refuse the offload as early as
possible on those devices.
Fixes: 57e661aae6a8 ("net: dsa: mv88e6xxx: Link aggregation support")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support for Global 2 registers is build-time optional. In the case
where it was not enabled the build would fail as no "dummy"
implementation of these functions was available.
Fixes: 57e661aae6a8 ("net: dsa: mv88e6xxx: Link aggregation support")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
fl_set_enc_opt() simply checks if there are still bytes left to parse,
but this is not sufficent as syzbot seems to be able to generate
malformatted netlink messages. nla_ok() is more strict so should be
used to validate the next nlattr here.
And nla_validate_nested_deprecated() has less strict check too, it is
probably too late to switch to the strict version, but we can just
call nla_ok() too after it.
Reported-and-tested-by: syzbot+2624e3778b18fc497c92@syzkaller.appspotmail.com
Fixes: 0a6e77784f49 ("net/sched: allow flower to match tunnel options")
Fixes: 79b1011cb33d ("net: sched: allow flower to match erspan options")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20210115185024.72298-1-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
George McCollister says:
====================
Arrow SpeedChips XRS700x DSA Driver
This series adds a DSA driver for the Arrow SpeedChips XRS 7000 series
of HSR/PRP gigabit switch chips.
The chips use Flexibilis IP.
More information can be found here:
https://www.flexibilis.com/products/speedchips-xrs7000/
The switches have up to three RGMII ports and one MII port and are
managed via mdio or i2c. They use a one byte trailing tag to identify
the switch port when in managed mode so I've added a tag driver which
implements this.
This series contains minimal DSA functionality which may be built upon
in future patches. The ultimate goal is to add HSR and PRP
(IEC 62439-3 Clause 5 & 4) offloading with integration into net/hsr.
====================
Link: https://lore.kernel.org/r/20210114195734.55313-1-george.mccollister@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
