summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-02-20MIPS: OCTEON: Save/Restore wider multiply registers in OCTEON III CPUsDavid Daney
The wide multiplier is twice as wide, so we need to save twice as much state. Detect the multiplier type (CPU type) at start up and install model specific handlers. [aleksey.makarov@auriga.com: conflict resolution, support for old compilers] Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Leonid Rosenboim <lrosenboim@caviumnetworks.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8933/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20thermal: exynos: fix: Check if data->tmu_read callback is present before readLukasz Majewski
The exynos_tmu_data() function should on entrance test not only for valid data pointer, but also for data->tmu_read one. It is important, since afterwards it is dereferenced to get temperature code. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-02-20MIPS: boot: Provide more uImage optionsMarkos Chandras
Allow more compression algorithms as well as uncompressed uImage.bin to be generated. An uncompressed image might be useful to rule out problems in the decompression code in the bootloader or even speed up the boot process at the expense of a bigger uImage file. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9271/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: Remove unneeded #ifdef __KERNEL__ from asm/processor.hDavid Daney
Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8737/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: ip22-gio: Remove legacy suspend/resume supportLars-Peter Clausen
There are currently no gio device drivers that implement suspend/resume and this patch removes the bus specific legacy suspend and resume callbacks. This will allow us to eventually remove struct bus_type legacy suspend and resume support altogether. gio device drivers wanting to implement suspend and resume can use dev PM ops which will work out of the box without further modifications necessary. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8920/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20mips: pci: Add ifdef around pci_proc_domainZubair Lutfullah Kakakhel
Without these, there are multiple definitions of pci_proc_domain() and pci_domain_nr() if linux/pci.h and asm/pci.h are included. Add #ifdefs around them Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Reviewed-by: Markos Chandras <Markos.Chandras@imgtec.com> Cc: Markos.Chandras@imgtec.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8670/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: Alchemy: Fix cpu clock calculationManuel Lauss
The current code uses bits 0-6 of the sys_cpupll register to calculate core clock speed. However this is only valid on Au1300, on all earlier models the hardware only uses bits 0-5 to generate core clock. This fixes clock calculation on the MTX1 (Au1500), where bit 6 of cpupll is set as well, which ultimately lead the code to calculate a bogus cpu core clock and also uart base clock down the line. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Reported-by: John Crispin <blogic@openwrt.org> Tested-by: Bruno Randolf <br1@einfach.org> Cc: stable@vger.kernel.org [v3.17+] Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/9279/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: Alchemy: remove declaration for set_cpuspecManuel Lauss
set_cpuspec() has been dropped with commit 074cf656700ddd1d2bd7f815f78e785418beb898 ("MIPS: Alchemy: remove cpu_table.") in late 2008. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/9150/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: Alchemy: preset loops_per_jiffy based on CPU clockManuel Lauss
This was lost during the rewrite of clock framework support. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/9149/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: Alchemy: fix Au1000/Au1500 LRCLK calculationManuel Lauss
The Au1000 and Au1500 calculate the LRCLK a bit differently than newer models: a single bit in MEM_STCFG0 selects if pclk is divided by 4 or 5. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/9148/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: Add set/clear CP0 macros for PageGrain registerSteven J. Hill
Build set and clear macros for the PageGrain register. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9289/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20ARM: 8305/1: DMA: Fix kzalloc flags in __iommu_alloc_buffer()Alexandre Courbot
There doesn't seem to be any valid reason to allocate the pages array with the same flags as the buffer itself. Doing so can eventually lead to the following safeguard in mm/slab.c's cache_grow() to be hit: if (unlikely(flags & GFP_SLAB_BUG_MASK)) { pr_emerg("gfp: %un", flags & GFP_SLAB_BUG_MASK); BUG(); } This happens when buffers are allocated with __GFP_DMA32 or __GFP_HIGHMEM. Fix this by allocating the pages array with GFP_KERNEL to follow what is done elsewhere in this file. Using GFP_KERNEL in __iommu_alloc_buffer() is safe because atomic allocations are handled by __iommu_alloc_atomic(). Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-02-20Merge branch 'overlayfs-next' of ↵Al Viro
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs into for-next
2015-02-20Infiniband: Fix potential NULL d_inode dereferenceDavid Howells
Code that does this: if (!(d_unhashed(tmp) && tmp->d_inode)) { ... simple_unlink(parent->d_inode, tmp); } is broken because: !(d_unhashed(tmp) && tmp->d_inode) is equivalent to: !d_unhashed(tmp) || !tmp->d_inode so it is possible to get into simple_unlink() with tmp->d_inode == NULL. simple_unlink(), however, assumes tmp->d_inode cannot be NULL. I think that what was meant is this: !d_unhashed(tmp) && tmp->d_inode and that the logical-not operator or the final close-bracket was misplaced. Signed-off-by: David Howells <dhowells@redhat.com> cc: Bryan O'Sullivan <bos@pathscale.com> cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-20posix_acl: fix reference leaks in posix_acl_createOmar Sandoval
get_acl gets a reference which we must release in the error cases. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Omar Sandoval <osandov@osandov.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-20autofs4: Wrong format for printing dentryRasmus Villemoes
%pD for struct file*, %pd for struct dentry*. Fixes: a455589f181e ("assorted conversions to %p[dD]") Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-20coredump: Fix typo in commentBastien Nocera
Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-20fs/aio.c: Remove duplicate function name in pr_debug messagesKinglong Mee
Have defined pr_fmt as below in fs/aio.c, so remove duplicate function name in pr_debug message. #define pr_fmt(fmt) "%s: " fmt, __func__ Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-20configfs: Fix potential NULL d_inode dereferenceDavid Howells
Code that does this: if (!(d_unhashed(dentry) && dentry->d_inode)) { ... simple_unlink(parent->d_inode, dentry); } is broken because: !(d_unhashed(dentry) && dentry->d_inode) is equivalent to: !d_unhashed(dentry) || !dentry->d_inode so it is possible to get into simple_unlink() with dentry->d_inode == NULL. simple_unlink(), however, assumes dentry->d_inode cannot be NULL. I think that what was meant is this: !d_unhashed(dentry) && dentry->d_inode and that the logical-not operator or the final close-bracket was misplaced. Signed-off-by: David Howells <dhowells@redhat.com> cc: Joel Becker <joel.becker@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-20hypfs: switch to read_iter/write_iterAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-20x86/mm/ASLR: Avoid PAGE_SIZE redefinition for UML subarchJiri Kosina
Commit f47233c2d34 ("x86/mm/ASLR: Propagate base load address calculation") causes PAGE_SIZE redefinition warnings for UML subarch builds. This is caused by added includes that were leftovers from previous patch versions are are not actually needed (especially page_types.h inlcude in module.c). Drop those stray includes. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@suse.de> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Kees Cook <keescook@chromium.org> Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1502201017240.28769@pobox.suse.cz Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-20don't bother with most of the bad_file_ops methodsAl Viro
Only ->open() should be there (always failing, of course). We never replace ->f_op of an already opened struct file, so there's no way for any of those methods to be called. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-19clk: Only recalculate the rate if neededTomeu Vizoso
We don't really need to recalculate the effective rate of a clock when a per-user clock is removed, if the constraints of the later aren't limiting the requested rate. This was causing problems with clocks that never had a rate set before, as rate_req would be zero. Though this could be considered a bug in the implementation of those clocks, this should be checked somewhere else. Fixes: 1c8e600440c7 ("clk: Add rate constraints to clocks") Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-02-19ipmi: Fix a memory ordering issueCorey Minyard
From a locking point of view it is safe to check waiting_msg without a lock, but there is a memory ordering issue that causes it to possibly not be set right when viewed from another processor. We are already claiming a lock right after that, move the check to inside the lock to enforce the memory ordering. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2015-02-19ipmi: Remove uses of return value of seq_printfJoe Perches
The seq_printf like functions will soon be changed to return void. Convert these uses to check seq_has_overflowed instead. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2015-02-19ipmi: Use is_visible callback for conditional sysfs entriesTakashi Iwai
Instead of manual calls of device_create_file() and device_remove_file(), implement the condition in is_visible callback for the attribute group and put these entries to the group, too. This simplifies the code and avoids the possible races. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2015-02-19ipmi: Free ipmi_recv_msg messages from the linked list on closeNicholas Krause
This adds a loop through the elements in the linked list, recv_msgs using list_for_entry_safe in order to free messages in this list. In addition we are using the safe version of this marco in order to prevent use after bugs related to deleting the element we are on currently by holding a pointer to the next element after the current one we are on and freeing with the function, ipmi_free_recv_msg internally in this loop. Signed-off-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2015-02-19ipmi: avoid gcc warningArnd Bergmann
A new harmless warning has come up on ARM builds with gcc-4.9: drivers/char/ipmi/ipmi_msghandler.c: In function 'smi_send.isra.11': include/linux/spinlock.h:372:95: warning: 'flags' may be used uninitialized in this function [-Wmaybe-uninitialized] raw_spin_unlock_irqrestore(&lock->rlock, flags); ^ drivers/char/ipmi/ipmi_msghandler.c:1490:16: note: 'flags' was declared here unsigned long flags; ^ This could be worked around by initializing the 'flags' variable, but it seems better to rework the code to avoid this. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 7ea0ed2b5be81 ("ipmi: Make the message handler easier to use for SMI interfaces") Signed-off-by: Corey Minyard <cminyard@mvista.com>
2015-02-19ipmi: Update timespec usage to timespec64John Stultz
As part of the internal y2038 cleanup, this patch removes timespec usage in the ipmi driver, replacing it timespec64 Cc: openipmi-developer@lists.sourceforge.net Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Corey Minyard <minyard@mvista.com>
2015-02-19ipmi: Cleanup DEBUG_TIMING ifdef usageJohn Stultz
The driver uses #ifdef DEBUG_TIMING in order to conditionally print out timestamped debug messages. Unfortunately it adds the ifdefs all over the usage sites. This patch cleans it up by adding a debug_timestamp() function which is compiled out if DEBUG_TIMING isn't present. This cleans up all the ugly ifdefs in the function logic. Cc: openipmi-developer@lists.sourceforge.net Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Corey Minyard <minyard@mvista.com>
2015-02-19drivers:char:ipmi: Remove unneeded FIXME comment in the file,ipmi_si_intf.cNicholas Krause
Removes a no longer needed FIXME comment in the function,acpi_gpe_irq_setup for the file,ipmi_si_intf.c. This comment is no longer needed as clearly we are passing the correct level of ACPI_GPE_LEVEL_TRIGGERED to the installer function,acpi_install_gpe_handler due to no breakage after years of using this ACPI level in the function,acpi_install_gpe_handler. Signed-off-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2015-02-19char: ipmi: Remove obsolete cleanup for clientdataWolfram Sang
A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit or error. This is obsolete meanwhile, the core will do it. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2015-02-19ipmi: Remove a FIXME for slab conversionCorey Minyard
There can't be more than a few IPMI messages allocated at any one time, so converting the messages to slabs would be a waste. So just remove the FIXME. Suggested-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2015-02-19Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull more thermal managament updates from Zhang Rui: "Specifics: - Exynos thermal driver refactoring. Several cleanups, code optimization, unused symbols removal, and unused feature removal in Exynos thermal driver. Thanks Lukasz for this effort. - Exynos thermal driver support to OF thermal. After the code refactoring, the driver earned the support to OF thermal. Chip thermal data were moved from driver code to DTS, reducing the code footprint. Thanks Lukasz for this. - After receiving the OF thermal support, the exynos thermal driver now must allow modular build. Thanks Arnd for detecting, reporting and fixing this. - Exynos thermal driver support to Exynos 7 SoC. Thanks Abhilash for this. - Accurate temperature reporting on Rockchip thermal driver, thanks to Caesar. - Fix on how OF thermal enables its zones, thanks Lukasz for fixing. - Fixes in OF thermal examples under Documentation/. Thanks Srinivas for fixing" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: exynos: Add TMU support for Exynos7 SoC dts: Documentation: Add documentation for Exynos7 SoC thermal bindings cpufreq: exynos: allow modular build thermal: Fix examples in DT documentation thermal: exynos: Correct sanity check at exynos_report_trigger() function thermal: Kconfig: Remove config for not used EXYNOS_THERMAL_CORE thermal: exynos: Remove exynos_tmu_data.c file thermal: rockchip: make temperature reporting much more accurate thermal: exynos: Remove exynos_thermal_common.[c|h] files thermal: samsung: core: Exynos TMU rework to use device tree for configuration dts: Documentation: Update exynos-thermal.txt example for Exynos5440 dts: Documentation: Extending documentation entry for exynos-thermal cpufreq: exynos: Use device tree to determine if cpufreq cooling should be registered thermal: exynos: Modify exynos thermal code to use device tree for cpu cooling configuration thermal: exynos: Provide thermal_exynos.h file to be included in device tree files thermal: exynos: cosmetic: Correct comment format thermal: of: Enable thermal_zoneX when sensor is correctly added
2015-02-19NVMe: Fix potential corruption on sync commandsKeith Busch
This makes all sync commands uninterruptible and schedules without timeout so the controller either has to post a completion or the timeout recovery fails the command. This fixes potential memory or data corruption from a command timing out too early or woken by a signal. Previously any DMA buffers mapped for that command would have been released even though we don't know what the controller is planning to do with those addresses. Signed-off-by: Keith Busch <keith.busch@intel.com>
2015-02-19NVMe: Remove unused variablesKeith Busch
We don't track queues in a llist, subscribe to hot-cpu notifications, or internally retry commands. Delete the unused artifacts. Signed-off-by: Keith Busch <keith.busch@intel.com>
2015-02-19NVMe: Fix scsi mode select llbaa settingKeith Busch
It should be a logical bitwise AND, not conditional. Signed-off-by: Keith Busch <keith.busch@intel.com>
2015-02-19NVMe: Fix potential corruption during shutdownKeith Busch
The driver has to end unreturned commands at some point even if the controller has not provided a completion. The driver tried to be safe by deleting IO queues prior to ending all unreturned commands. That should cause the controller to internally abort inflight commands, but IO queue deletion request does not have to be successful, so all bets are off. We still have to make progress, so to be extra safe, this patch doesn't clear a queue to release the dma mapping for a command until after the pci device has been disabled. This patch removes the special handling during device initialization so controller recovery can be done all the time. This is possible since initialization is not inlined with pci probe anymore. Reported-by: Nilish Choudhury <nilesh.choudhury@oracle.com> Signed-off-by: Keith Busch <keith.busch@intel.com>
2015-02-19NVMe: Asynchronous controller probeKeith Busch
This performs the longest parts of nvme device probe in scheduled work. This speeds up probe significantly when multiple devices are in use. Signed-off-by: Keith Busch <keith.busch@intel.com>
2015-02-19NVMe: Register management handle under nvme classKeith Busch
This creates a new class type for nvme devices to register their management character devices with. This is so we do not rely on miscdev to provide enough minors for as many nvme devices some people plan to use. The previous limit was approximately 60 NVMe controllers, depending on the platform and kernel. Now the limit is 1M, which ought to be enough for anybody. Since we have a new device class, it makes sense to attach the block devices under this as well, so part of this patch moves the management handle initialization prior to the namespaces discovery. Signed-off-by: Keith Busch <keith.busch@intel.com>
2015-02-19NVMe: Update SCSI Inquiry VPD 83h translationKeith Busch
The original translation created collisions on Inquiry VPD 83 for many existing devices. Newer specifications provide other ways to translate based on the device's version can be used to create unique identifiers. Version 1.1 provides an EUI64 field that uniquely identifies each namespace, and 1.2 added the longer NGUID field for the same reason. Both follow the IEEE EUI format and readily translate to the SCSI device identification EUI designator type 2h. For devices implementing either, the translation will use this type, defaulting to the EUI64 8-byte type if implemented then NGUID's 16 byte version if not. If neither are provided, the 1.0 translation is used, and is updated to use the SCSI String format to guarantee a unique identifier. Knowing when to use the new fields depends on the nvme controller's revision. The NVME_VS macro was not decoding this correctly, so that is fixed in this patch and moved to a more appropriate place. Since the Identify Namespace structure required an update for the NGUID field, this patch adds the remaining new 1.2 fields to the structure. Signed-off-by: Keith Busch <keith.busch@intel.com>
2015-02-19NVMe: Metadata format supportKeith Busch
Adds support for NVMe metadata formats and exposes block devices for all namespaces regardless of their format. Namespace formats that are unusable will have disk capacity set to 0, but a handle to the block device is created to simplify device management. A namespace is not usable when the format requires host interleave block and metadata in single buffer, has no provisioned storage, or has better data but failed to register with blk integrity. The namespace has to be scanned in two phases to support separate metadata formats. The first establishes the sector size and capacity prior to invoking add_disk. If metadata is required, the capacity will be temporarilly set to 0 until it can be revalidated and registered with the integrity extenstions after add_disk completes. The driver relies on the integrity extensions to provide the metadata buffer. NVMe requires this be a single physically contiguous region, so only one integrity segment is allowed per command. If the metadata is used for T10 PI, the driver provides mappings to save and restore the reftag physical block translation. The driver provides no-op functions for generate and verify if metadata is not used for protection information. This way the setup is always provided by the block layer. If a request does not supply a required metadata buffer, the command is failed with bad address. This could only happen if a user manually disables verify/generate on such a disk. The only exception to where this is okay is if the controller is capable of stripping/generating the metadata, which is possible on some types of formats. The metadata scatter gather list now occupies the spot in the nvme_iod that used to be used to link retryable IOD's, but we don't do that anymore, so the field was unused. Signed-off-by: Keith Busch <keith.busch@intel.com>
2015-02-19x86: pte_protnone() and pmd_protnone() must check entry is not presentDavid Vrabel
Since _PAGE_PROTNONE aliases _PAGE_GLOBAL it is only valid if _PAGE_PRESENT is clear. Make pte_protnone() and pmd_protnone() check for this. This fixes a 64-bit Xen PV guest regression introduced by 8a0516ed8b90 ("mm: convert p[te|md]_numa users to p[te|md]_protnone_numa"). Any userspace process would endlessly fault. In a 64-bit PV guest, userspace page table entries have _PAGE_GLOBAL set by the hypervisor. This meant that any fault on a present userspace entry (e.g., a write to a read-only mapping) would be misinterpreted as a NUMA hinting fault and the fault would not be correctly handled, resulting in the access endlessly faulting. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-19cpuidle: powernv: Avoid endianness conversions while parsing DTPreeti U Murthy
We currently read the information about idle states from the DT so as to populate the cpuidle table. Use those APIs to read from the DT that can avoid endianness conversions of the property values in the cpuidle driver. Signed-off-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs updates from Chris Mason: "This pull is mostly cleanups and fixes: - The raid5/6 cleanups from Zhao Lei fixup some long standing warts in the code and add improvements on top of the scrubbing support from 3.19. - Josef has round one of our ENOSPC fixes coming from large btrfs clusters here at FB. - Dave Sterba continues a long series of cleanups (thanks Dave), and Filipe continues hammering on corner cases in fsync and others This all was held up a little trying to track down a use-after-free in btrfs raid5/6. It's not clear yet if this is just made easier to trigger with this pull or if its a new bug from the raid5/6 cleanups. Dave Sterba is the only one to trigger it so far, but he has a consistent way to reproduce, so we'll get it nailed shortly" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (68 commits) Btrfs: don't remove extents and xattrs when logging new names Btrfs: fix fsync data loss after adding hard link to inode Btrfs: fix BUG_ON in btrfs_orphan_add() when delete unused block group Btrfs: account for large extents with enospc Btrfs: don't set and clear delalloc for O_DIRECT writes Btrfs: only adjust outstanding_extents when we do a short write btrfs: Fix out-of-space bug Btrfs: scrub, fix sleep in atomic context Btrfs: fix scheduler warning when syncing log Btrfs: Remove unnecessary placeholder in btrfs_err_code btrfs: cleanup init for list in free-space-cache btrfs: delete chunk allocation attemp when setting block group ro btrfs: clear bio reference after submit_one_bio() Btrfs: fix scrub race leading to use-after-free Btrfs: add missing cleanup on sysfs init failure Btrfs: fix race between transaction commit and empty block group removal btrfs: add more checks to btrfs_read_sys_array btrfs: cleanup, rename a few variables in btrfs_read_sys_array btrfs: add checks for sys_chunk_array sizes btrfs: more superblock checks, lower bounds on devices and sectorsize/nodesize ...
2015-02-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph changes from Sage Weil: "On the RBD side, there is a conversion to blk-mq from Christoph, several long-standing bug fixes from Ilya, and some cleanup from Rickard Strandqvist. On the CephFS side there is a long list of fixes from Zheng, including improved session handling, a few IO path fixes, some dcache management correctness fixes, and several blocking while !TASK_RUNNING fixes. The core code gets a few cleanups and Chaitanya has added support for TCP_NODELAY (which has been used on the server side for ages but we somehow missed on the kernel client). There is also an update to MAINTAINERS to fix up some email addresses and reflect that Ilya and Zheng are doing most of the maintenance for RBD and CephFS these days. Do not be surprised to see a pull request come from one of them in the future if I am unavailable for some reason" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (27 commits) MAINTAINERS: update Ceph and RBD maintainers libceph: kfree() in put_osd() shouldn't depend on authorizer libceph: fix double __remove_osd() problem rbd: convert to blk-mq ceph: return error for traceless reply race ceph: fix dentry leaks ceph: re-send requests when MDS enters reconnecting stage ceph: show nocephx_require_signatures and notcp_nodelay options libceph: tcp_nodelay support rbd: do not treat standalone as flatten ceph: fix atomic_open snapdir ceph: properly mark empty directory as complete client: include kernel version in client metadata ceph: provide seperate {inode,file}_operations for snapdir ceph: fix request time stamp encoding ceph: fix reading inline data when i_size > PAGE_SIZE ceph: avoid block operation when !TASK_RUNNING (ceph_mdsc_close_sessions) ceph: avoid block operation when !TASK_RUNNING (ceph_get_caps) ceph: avoid block operation when !TASK_RUNNING (ceph_mdsc_sync) rbd: fix error paths in rbd_dev_refresh() ...
2015-02-19MIPS: Usage and cosmetic cleanups of page table bits.Steven J. Hill
* Clean up white spaces and tabs. * Get rid of remaining hardcoded values for calculating shifts and masks. * Get rid of redundant macro values. * Do not use page table bits directly in #ifdef's. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9287/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-19Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal managament updates from Zhang Rui: "Specifics: - Abstract the code and introduce helper functions for all int340x thermal drivers. From: Srinivas Pandruvada. - Reorganize the ACPI LPAT table support code so that it can be shared for both ACPI PMIC driver and int340x thermal driver. - Add support for Braswell in intel_soc_dts thermal driver. - a couple of small fixes/cleanups for step_wise governor and int340x thermal driver" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: Thermal/int340x_thermal: remove unused uuids. thermal: step_wise: spelling fixes thermal: int340x: fix sparse warning Thermal/int340x: LPAT conversion for temperature ACPI / PMIC: Use common LPAT table handling functions ACPI / LPAT: Common table processing functions thermal: Intel SoC DTS: Add Braswell support Thermal/int340x/int3402: Provide notification support Thermal/int340x/processor_thermal: Add thermal zone support Thermal/int340x/int3403: Use int340x thermal API Thermal/int340x/int3402: Use int340x thermal API Thermal/int340x: Add common thermal zone handler
2015-02-19Merge tag 'edac_fixes_for_3.20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp Pull two EDAC fixes from Borislav Petkov: - A fix to sb_edac for proper detection on SNB machines - A fix to amd64_edac to not explode on Numascale machines with more than 16 memory controllers, from Daniel J Blueman. * tag 'edac_fixes_for_3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, amd64_edac: Prevent OOPS with >16 memory controllers sb_edac: Fix detection on SNB machines
2015-02-19Merge tag 'platform-drivers-x86-v3.20-1' of ↵Linus Torvalds
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull platform driver update from Darren Hart: "This includes a significant update to the toshiba_acpi driver, bringing it to feature parity with the Windows driver, followed by some needed cleanups. The other changes are mostly minor updates, quirks, sparse fixes, or cleanups. Details: - toshiba_acpi: Add support for missing features from the Windows driver, bump the sysfs version, and clean up the driver. - thinkpad_acpi: BIOS string versions, unhandled hkey events. - msamsung-laptop: Add native backlight quirk, enable better lid handling. - intel_scu_ipc: Read resources from PCI configuration - other: Fix sparse warnings, general cleanups" * tag 'platform-drivers-x86-v3.20-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (34 commits) toshiba_acpi: Cleanup GPL header toshiba_acpi: Cleanup comment blocks and capitalization toshiba_acpi: Make use of DEVICE_ATTR_{RO, RW} macros toshiba_acpi: Drop the toshiba_ prefix from sysfs function names toshiba_acpi: Move sysfs function and struct declarations further down Documentation/ABI: Add file describing the sysfs entries for toshiba_acpi toshiba_acpi: Clean file according to coding style toshiba_acpi: Bump version number to 0.21 toshiba_acpi: Add support to enable/disable USB 3 toshiba_acpi: Add support for Panel Power ON toshiba_acpi: Add support for Keyboard functions mode toshiba_acpi: Add fan entry to sysfs toshiba_acpi: Add version entry to sysfs thinkpad_acpi: support new BIOS version string pattern thinkpad_acpi: unhandled hkey event toshiba_acpi: Make toshiba_eco_mode_available more robust classmate-laptop: Fix sparse warning (0 as NULL) Sony-laptop: Fix sparse warning (make undeclared var static) thinkpad_acpi.c: Fix sparse warning (make undeclared var static) samsung-laptop.c: Prefer kstrtoint over single variable sscanf ...
generated by cgit (git 2.34.1) at 2025-07-15 20:32:22 +0000