summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-05-26mac80211: add a single-transaction driver op to switch contextsLuciano Coelho
In some cases, when the driver is already using all the channel contexts it can handle at once, we have to do an in-place switch (ie. we cannot afford using an extra context temporarily for the transaction). But some drivers may not support switching the channel context assigned to a vif on the fly (ie. without unassigning and assigning it) while others may only work if the context is changed on the fly, without unassigning it first. To allow these different scenarios, add a new driver operation that let's the driver decide how to handle an in-place switch. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-23Bluetooth: Clearly distinguish mgmt LTK type from authenticated propertyJohan Hedberg
On the mgmt level we have a key type parameter which currently accepts two possible values: 0x00 for unauthenticated and 0x01 for authenticated. However, in the internal struct smp_ltk representation we have an explicit "authenticated" boolean value. To make this distinction clear, add defines for the possible mgmt values and do conversion to and from the internal authenticated value. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-05-22mwifiex: use 'const' qualifier for 2nd arg of mwifiex_tdls_add_ht_operJohn W. Linville
Fixes the following warning: CC drivers/net/wireless/mwifiex/tdls.o drivers/net/wireless/mwifiex/tdls.c: In function ‘mwifiex_prep_tdls_encap_data’: drivers/net/wireless/mwifiex/tdls.c:475:4: warning: passing argument 2 of ‘mwifiex_tdls_add_ht_oper’ discards ‘const’ qualifier from pointer target type [enabled by default] ret = mwifiex_tdls_add_ht_oper(priv, peer, 1, skb); ^ drivers/net/wireless/mwifiex/tdls.c:190:1: note: expected ‘u8 *’ but argument is of type ‘const u8 *’ mwifiex_tdls_add_ht_oper(struct mwifiex_private *priv, u8 *mac, ^ drivers/net/wireless/mwifiex/tdls.c:481:4: warning: passing argument 2 of ‘mwifiex_tdls_add_ht_oper’ discards ‘const’ qualifier from pointer target type [enabled by default] ret = mwifiex_tdls_add_ht_oper(priv, peer, 0, skb); ^ drivers/net/wireless/mwifiex/tdls.c:190:1: note: expected ‘u8 *’ but argument is of type ‘const u8 *’ mwifiex_tdls_add_ht_oper(struct mwifiex_private *priv, u8 *mac, ^ Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22ath9k: fix sleep timer during suspendRajkumar Manoharan
On idle state, sleep timer is scheduled to put the chip into fullsleep. But during suspend, this timer is scheduled after the chip is moved to fullsleep forcibily. This is causing below unnecessary error messages in kernel log during suspend. ath: phy2: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 ath: phy2: RX failed to go idle in 10 ms RXSM=0xdeadbeef ath: phy2: DMA failed to stop in 10 ms AR_CR=0xdeadbeef AR_DIAG_SW=0xdeadbeef DMADBG_7=0xdeadbeef Reported-by: Arkh4mKn1ght <arkh4mkn1ght@gmail.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22ath9k: Handle multiple keys while setting tx filtersRajkumar Manoharan
The keycache index is used to abort transmission for given station when it goes to sleep state. But the commit "ath9k_hw: Abort transmission for sleeping station" is not handling multi-key station. Fix that. Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22mwifiex: update seq number correctly for packets from TDLS peerAvinash Patil
This patch adds handling of updating rx sequence number for packets received from TDLS peer. Current implementation of mwifiex_queueing_ra_based assumes station would always receive packets from AP which is not true in case of TDLS. Fix this by adding this case. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22mwifiex: set TDLS flags for AMSDU packetsAvinash Patil
This patch fixes an issue where AMSDU packets for TDLS link would flow over infra link. This happened because we were missing setting TDLS flag in TxPD on AMSDU packets. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22mwifiex: delete TDLS link upon Teardown eventAvinash Patil
If userspace application does not take care of TDLS teardown event, TDLS link would be present in driver database and thus driver would send such packets on direct link while peer has already severed link causing data traffic failure. Disable TDLS link upon teardown event so as to ensure this does not happen. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22mwifiex: silence TDLS link delete failure for nonexistent linkAvinash Patil
If TDLS link delete command fails because of non-existent peer or TDLS peer is absent from driver's entry, it means link was already deleted. In such case print debug messages with lower severity. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22mwifiex: avoid TDLS check for packets destined to APAvinash Patil
In station role if TDLS is supported, we traverse TDLS peer list to see if packet's destination address matches with TDLS peer. Packets destined to AP are not sent over TDLS link and hence avoid this list traversal for such packets. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22ath9k: fix build error with disabled debugZefir Kurtisi
DFS pulse interval printing is only available when CONFIG_ATH9K_DEBUGFS is set. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22b43: N-PHY: add missing calib values for radio 0x2026 rev 11Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22b43: fix list of 5 GHz channels for 802.11n cardsRafał Miłecki
Broadcom hardware uses a bit tricky hw_value-s for 5 GHz channels, values 184-228 are used for 4920-5140 MHz center frequencies. Normally you expect channels 7-16 (e.g. 5060 MHz is channel 12, not 212). We never meant to register hw_value 228 with freq 6140 MHz (5000 + 228 * 5). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22b43: fix typo in define name for 2 GHz channels (s/CHAN4G/CHAN2G/)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22libertas: fix return value when processing invalid packetDan Williams
Nothing actually uses the return value yet, but we might as well make it correct, like process_rxed_802_11_packet() does for the same case. Also ensure that if monitor mode is enabled (and thus process_rxed_802_11_packet() is called) that the debugging enter/leave functions are balanced. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22rt2x00: Endless loop on hub port power downRichard Genoud
I've met an endless (or at least very long) loop if I power down the usb port on witch a usb wifi key is plugged. (Ok, it's not very smart to power down a usb port when a usb key is in used... but still, I think that should not lead to an endless loop). I have a lot of: ieee80211 phy1: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0438 with error -71 (-71==-EPROTO) How to reproduce: - plug an usb wifi key - ip link set wlan0 up - hub-ctrl -b usb_bus -d usb_device -P usb_port -p 0 hub-ctrl source: https://github.com/codazoda/hub-ctrl.c/blob/master/hub-ctrl.c The following patch prevents the endless loop, but I'm really not sure that The Right Way To Do It (R) Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22carl9170: fix leaks at failure path in carl9170_usb_probe()Alexey Khoroshilov
carl9170_usb_probe() does not handle request_firmware_nowait() failure that leads to several leaks in this case. The patch adds all required deallocations. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2014-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-nextJohn W. Linville
2014-05-22Merge tag 'nfc-next-3.16-1' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next Samuel Ortiz <sameo@linux.intel.com> says: "NFC: 3.16: First pull request This is the NFC pull request for 3.16. We have: - STMicroeectronics st21nfca support. The st21nfca is an HCI chipset and thus relies on the HCI stack. This submission provides support for tag redaer/writer mode (including Type 5) and device tree bindings. - PM runtime support and a bunch of bug fixes for TI's trf7970a. - Device tree support for NXP's pn544. Legacy platform data support is obviously kept intact. - NFC Tag type 4B support to the NFC Digital stack. - SOCK_RAW type support to the raw NFC socket, and allow NCI sniffing from that. This can be extended to report HCI frames and also proprietarry ones like e.g. the pn533 ones." Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2014-05-22cfg80211: allow RSSI compensationEmmanuel Grumbach
Channels in 2.4GHz band overlap, this means that if we send a probe request on channel 1 and then move to channel 2, we will hear the probe response on channel 2. In this case, the RSSI will be lower than if we had heard it on the channel on which it was sent (1 in this case). The firmware / low level driver can parse the channel in the DS IE or HT IE and compensate the RSSI so that it will still have a valid value even if we heard the frame on an adjacent channel. This can be done up to a certain offset. Add this offset as a configuration for the low level driver. A low level driver that can compensate the low RSSI in this case should assign the maximal offset for which the RSSI value is still valid. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-22iwlwifi: mvm: remove vif argument from power_update_macArik Nemtsov
The power update function looks at all current vifs to determine the power policy. It doesn't use the current vif. Instead the value was overwritten and used internally. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-22iwlwifi: mvm: make iwl_mvm_update_beacon_abort staticEmmanuel Grumbach
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-22iwlwifi: mvm: remove debugfs hook for reduced tx powerEmmanuel Grumbach
This was not used is unlikely to be used, just kill it. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-22iwlwifi: mvm: disable reduced Tx power when not applicableEmmanuel Grumbach
I forgot to disable the reduced Tx power in a few paths. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-21iwlwifi: mvm: pass force_assoc_off all the way down to avoid hacksLuciano Coelho
In some cases, we need to force the association to be off in the MAC_CONTEXT_CMD command we send to the firmware. Instead of having to hack the vif->bss_conf.assoc value, pass it all the way down the call chain. Additionally, for the iwl_mvm_mac_ctxt_add() case, we *always* set forced_assoc_off to true, so we can remove the hack in the d3 code that was forcing it to off by hacking the bss_conf.assoc value. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-21iwlwifi: mvm: don't filter out the first beaconAvri Altman
Enabling beacon filtering should be done only after a beacon has been received. Doing that too early will cause disconnections. This has already been fixed, but the fix didn't take care about the case where the beacon is received after the association, it waited only for association which is not enough. Signed-off-by: Avri Altman <avri.altman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-21Merge remote-tracking branch 'iwlwifi-fixes/master' into iwlwifi-nextEmmanuel Grumbach
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Conflicts: drivers/net/wireless/iwlwifi/mvm/mac80211.c
2014-05-21iwlwifi: mvm: disable beacon filteringEmmanuel Grumbach
This feature has been causing trouble - disable it for now. Cc: <stable@vger.kernel.org> [3.13+] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-21cfg80211: don't set reg timeout for user-handled hintArik Nemtsov
Otherwise every "indoor" setting by usermode will cause a regdomain reset. Acked-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-21cfg80211: implement cfg80211_get_station cfg80211 APIAntonio Quartulli
Implement and export the new cfg80211_get_station() API. This utility can be used by other kernel modules to obtain detailed information about a given wireless station. It will be in particular useful to batman-adv which will implement a wireless rate based metric. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-21mac80211: export the expected throughputAntonio Quartulli
Add get_expected_throughput() API to mac80211 so that each driver can implement its own version based on the RC algorithm they are using (might be using an HW RC algo). The API returns a value expressed in Kbps. Also, add the new get_expected_throughput() member to the rate_control_ops structure in order to be able to query the RC algorithm (this patch provides an implementation of this API for both minstrel and minstrel_ht). The related member in the station_info object is now filled accordingly when dumping a station. Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-20ath9k: fixup "ath9k_htc: fix build with disabled debug"John W. Linville
Apparently Oleksij's compile testing was no better than mine initially was... :-( Cc: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-20Bluetooth: Update smp_confirm to return a response codeJohan Hedberg
Now that smp_confirm() is called "inline" we can have it return a response code and have the sending of it be done in the shared place for command handlers. One exception is when we're entering smp.c from mgmt.c when user space responds to authentication, in which case we still need our own code to call smp_failure(). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-05-20Bluetooth: Update smp_random to return a response codeJohan Hedberg
Since we're now calling smp_random() "inline" we can have it directly return a response code and have the shared command handler send the response. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-05-20Bluetooth: Rename smp->smp_flags to smp->flagsJohan Hedberg
There's no reason to have "smp" in this variable name since it is already part of the SMP struct which provides sufficient context. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-05-20Bluetooth: Remove unnecessary work structs from SMP codeJohan Hedberg
When the SMP code was initially created (mid-2011) parts of the Bluetooth subsystem were still not converted to use workqueues. This meant that the crypto calls, which could sleep, couldn't be called directly. Because of this the "confirm" and "random" work structs were introduced. These days the entire Bluetooth subsystem runs through workqueues which makes these structs unnecessary. This patch removes them and converts the calls to queue them to use direct function calls instead. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-05-20Bluetooth: Fix setting initial local auth_req valueJohan Hedberg
There is no reason to have the initial local value conditional to whether the remote value has bonding set or not. We can either way start off with the value we received. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-05-20Bluetooth: Make SMP context private to smp.cJohan Hedberg
There are no users of the smp_chan struct outside of smp.c so move it away from smp.h. The addition of the l2cap.h include to hci_core.c, hci_conn.c and mgmt.c is something that should have been there already previously to avoid warnings of undeclared struct l2cap_conn, but the compiler warning was apparently shadowed away by the mention of l2cap_conn in the struct smp_chan definition. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-05-20b43: xmit: set 5 GHz bit depending on current bandRafał Miłecki
PHYs other than A may also work in 5 GHz mode. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-20ath9k_htc: fix build with disabled debugOleksij Rempel
CC [M] drivers/net/wireless/ath/ath9k/htc_drv_txrx.o drivers/net/wireless/ath/ath9k/htc_drv_txrx.c: In function ‘ath9k_rx_prepare’: drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:1006:2: warning: passing argument 2 of ‘ath9k_htc_err_stat_rx’ from incompatible pointer type [enabled by default] ath9k_htc_err_stat_rx(priv, &rx_stats); ^ In file included from drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:17:0: drivers/net/wireless/ath/ath9k/htc.h:380:20: note: expected ‘struct ath_htc_rx_status *’ but argument is of type ‘struct ath_rx_status *’ static inline void ath9k_htc_err_stat_rx(struct ath9k_htc_priv *priv, Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-20b43: add more devices to the bands databaseRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-20b43: move bands detection to a separated functionRafał Miłecki
This cleans code a bit and allows adding support for more devices. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-20cfg80211: export expected throughput through get_station()Antonio Quartulli
Users may need information about the expected throughput towards a given peer. This value is supposed to consider the size overhead generated by the 802.11 header. This value is exported in kbps through the get_station() API by including it into the station_info object. Moreover, it is sent to user space when replying to the nl80211 GET_STATION command. This information will be useful to the batman-adv module which will use it for its new metric computation. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-20NFC: st21nfca: Add ISO15693 Reader/Writer supportChristophe Ricard
Add support for ISO/IEC 15693 RF technology and Type 5 tags. ISO15963 is using proprietary gate 12. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-05-20NFC: st21nfca: Improve load_sessionChristophe Ricard
In case anybody uses previous patchset with the CLF, add a check to make sure missing pipe are created. st21nfca returns its pipe list in the creation order (most recent latest). Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-05-20NFC: dts: st21nfca_i2c: Add DTS DocumentationChristophe Ricard
Describe the properties used by the st21nfca NFC controller driver. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-05-20NFC: dts: st21nfca: Add device-tree (Open Firmware) support to st21nfcaChristophe Ricard
Add functions to recover hardware resources from the device-tree when not provided by the platform data. Based on pn544 devicetree implementation Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-05-20NFC: NCI: Send all NCI frames to raw socketsHiren Tandel
So that anyone listening on SOCKPROTO_RAW for raw frames will get all NCI frames, in both directions. This actually implements userspace NFC NCI sniffing. It's now up to userspace to decode those frames. Signed-off-by: Hiren Tandel <hirent@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-07-16 19:10:31 +0000