summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-29octeontx2-af: fix Extended DSA and eDSA parsingSatha Rao
KPU profile interpret Extended DSA and eDSA by looking source dev. This was incorrect and it restricts to use few source device ids and also created confusion while parsing regular DSA tag. With below patch lookup was based on bit 12 of Word0. This is always zero for DSA tag and it should be one for Extended DSA and eDSA. Signed-off-by: Satha Rao <skoteshwar@marvell.com> Acked-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-29octeontx2-af: add parser support for Forward DSAHariprasad Kelam
Marvell Prestera switches supports distributed switch architecture by inserting Forward DSA tag of 4 bytes right after ethernet SMAC. This tag don't have a tpid field. This patch provides parser and extraction support for the same. Default ldata extraction profile added for FDSA such that Src_port is extracted and placed inplace of vlanid field. Like extended DSA and eDSA tags,a special PKIND of 62 is used for this tag. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Acked-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-29octeontx2-af: cleanup KPU config dataStanislaw Kardach
Refactor KPU related NPC code gathering all configuration data in a structured format and putting it in one place (npc_profile.h). This increases readability and makes it easier to extend the profile configuration (as opposed to jumping between multiple header and source files). To do this: * Gather all KPU profile related data into a single adapter struct. * Convert the built-in MKEX definition to a structured one to streamline the MKEX loading. * Convert LT default register configuration into a structure, keeping default protocol settings in same file where identifiers for those protocols are defined. * Add a single point for KPU profile loading, so that its source may change in the future once proper interfaces for loading such config are in place. Signed-off-by: Stanislaw Kardach <skardach@marvell.com> Acked-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-29octeontx2-af: fix LD CUSTOM LTYPE aliasingStanislaw Kardach
Since LD contains LTYPE definitions tweaked toward efficient NIX_AF_RX_FLOW_KEY_ALG(0..31)_FIELD(0..4) usage, the original location of NPC_LT_LD_CUSTOM0/1 was aliased with MPLS_IN_* definitions. Moving custom frame to value 6 and 7 removes the aliasing at the cost of custom frames being also considered when TCP/UDP RSS algo is configured. However since the goal of CUSTOM frames is to classify them to a separate set of RQs, this cost is acceptable. Signed-off-by: Stanislaw Kardach <skardach@marvell.com> Acked-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net/sched: cls_u32: Replace one-element array with flexible-array memberGustavo A. R. Silva
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. Refactor the code according to the use of a flexible-array member in struct tc_u_hnode and use the struct_size() helper to calculate the size for the allocations. Commit 5778d39d070b ("net_sched: fix struct tc_u_hnode layout in u32") makes it clear that the code is expected to dynamically allocate divisor + 1 entries for ->ht[] in tc_uhnode. Also, based on other observations, as the piece of code below: 1232 for (h = 0; h <= ht->divisor; h++) { 1233 for (n = rtnl_dereference(ht->ht[h]); 1234 n; 1235 n = rtnl_dereference(n->next)) { 1236 if (tc_skip_hw(n->flags)) 1237 continue; 1238 1239 err = u32_reoffload_knode(tp, n, add, cb, 1240 cb_priv, extack); 1241 if (err) 1242 return err; 1243 } 1244 } we can assume that, in general, the code is actually expecting to allocate that extra space for the one-element array in tc_uhnode, everytime it allocates memory for instances of tc_uhnode or tc_u_common structures. That's the reason for passing '1' as the last argument for struct_size() in the allocation for _root_ht_ and _tp_c_, and 'divisor + 1' in the allocation code for _ht_. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays Tested-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/lkml/5f7062af.z3T9tn9yIPv6h5Ny%25lkp@intel.com/ Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28qed/qed_ll2: Replace one-element array with flexible-array memberGustavo A. R. Silva
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. Refactor the code according to the use of a flexible-array member in struct qed_ll2_tx_packet, instead of a one-element array and use the struct_size() helper to calculate the size for the allocations. Commit f5823fe6897c ("qed: Add ll2 option to limit the number of bds per packet") was used as a reference point for these changes. Also, it's important to notice that flexible-array members should occur last in any structure, and structures containing such arrays and that are members of other structures, must also occur last in the containing structure. That's why _cur_completing_packet_ is now moved to the bottom in struct qed_ll2_tx_queue. _descq_mem_ and _cur_send_packet_ are also moved for unification. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays Tested-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/lkml/5f707198.PA1UCZ8MYozYZYAR%25lkp@intel.com/ Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28stmmac: intel: Adding ref clock 1us tic for LPI cntrRusaimi Amira Ruslan
Adding reference clock (1us tic) for all LPI timer on Intel platforms. The reference clock is derived from ptp clk. This also enables all LPI counter. Signed-off-by: Rusaimi Amira Ruslan <rusaimi.amira.rusaimi@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28Merge branch 'net-ipa-miscellaneous-cleanups'David S. Miller
Alex Elder says: ==================== net: ipa: miscellaneous cleanups This series contains some minor cleanups I've been meaning to get around to for a while. The first few remove the definitions of some currently-unused symbols. Several fix some warnings that are reported when the build is done with "W=2". All are simple and have no effect on the operation of the code. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net: ipa: fix two commentsAlex Elder
In ipa_uc_response_hdlr() a comment uses the wrong function name when it describes where a clock reference is taken. Fix this. Also fix the comment in ipa_uc_response_hdlr() to correctly refer to ipa_uc_setup(), which is where the clock reference described here is taken. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net: ipa: rename a phandle variableAlex Elder
When "W=2" is supplied to the build command, we get a warning about shadowing a global declaration (of a typedef) for a variable defined in ipa_probe(). Rename the variable to get rid of the warning. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net: ipa: fix two mild warningsAlex Elder
Fix two spots where a variable "channel_id" is unnecessarily redefined inside loops in "gsi.c". This is warned about if "W=2" is added to the build command. Note that this problem is harmless, so there's no need to backport it as a bugfix. Remove a comment in gsi_init() about waking the system; the GSI interrupt does not wake the system any more. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net: ipa: share field mask values for GSI general interruptAlex Elder
The GSI general interrupt is managed by three registers: enable; status; and clear. The three registers have same set of field bits at the same locations. Use a common set of field masks for all three registers to avoid duplication. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net: ipa: share field mask values for GSI global interruptAlex Elder
The GSI global interrupt is managed by three registers: enable; status; and clear. The three registers have same set of field bits at the same locations. Use a common set of field masks for all three registers to avoid duplication. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net: ipa: share field mask values for GSI interrupt typeAlex Elder
The GSI interrupt type register and interrupt type mask register have the same field bits at the same locations. Use a common set of field masks for both registers rather than essentially duplicating them. The only place the interrupt mask register uses any of these is in gsi_irq_enable(). Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net: ipa: remove unused status structure field masksAlex Elder
Most of the field masks used for fields in a status structure are unused. Remove their definitions; we can add them back again when we actually use them to handle arriving status messages. These are warned about if "W=2" is added to the build command. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net: ipa: kill unused status exceptionsAlex Elder
Only the deaggregation status exception type is ever actually used. If any other status exception type is reported we basically ignore it, and consume the packet. Remove the unused definitions of status exception type symbols; they can be added back when we actually handle them. Separately, two consecutive if statements test the same condition near the top of ipa_endpoint_suspend_one(). Instead, use a single test with a block that combines the previously-separate lines of code. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net: ipa: kill unused status opcodesAlex Elder
Three status opcodes are not currently supported. Symbols representing their numeric values are defined but never used. Remove those unused definitions; they can be defined again when they actually get used. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net: ipa: kill definition of TRE_FLAGS_IEOB_FMASKAlex Elder
In "gsi_trans.c", the field mask TRE_FLAGS_IEOB_FMASK is defined but never used. Although there's no harm in defining this, remove it for now and redefine it at some future date if it becomes needed. This is warned about if "W=2" is added to the build command. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28Merge branch 'ibmvnic-refactor-some-send-handle-functions'David S. Miller
Lijun Pan says: ==================== ibmvnic: refactor some send/handle functions This patch series rename and factor some send crq request functions. The new naming aligns better with handle* functions such that it make the code easier to read and search by new contributors. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28ibmvnic: create send_control_ip_offloadLijun Pan
Factor send_control_ip_offload out of handle_query_ip_offload_rsp. Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28ibmvnic: create send_query_ip_offloadLijun Pan
Factor send_query_ip_offload out of handle_request_cap_rsp to pair with handle_query_ip_offload_rsp. Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28ibmvnic: rename send_map_query to send_query_mapLijun Pan
The new name send_query_map pairs with handle_query_map_rsp. Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28ibmvnic: rename ibmvnic_send_req_caps to send_request_capLijun Pan
The new name send_request_cap pairs with handle_request_cap_rsp. Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28ibmvnic: rename send_cap_queries to send_query_capLijun Pan
The new name send_query_cap pairs with handle_query_cap_rsp. Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28ibmvnic: set up 200GBPS speedLijun Pan
Set up the speed according to crq->query_phys_parms.rsp.speed. Fix IBMVNIC_10GBPS typo. Fixes: f8d6ae0d27ec ("ibmvnic: Report actual backing device speed and duplex values") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28atm: atmtcp: Constify atmtcp_v_dev_opsRikard Falkeborn
The only usage of atmtcp_v_dev_ops is to pass its address to atm_dev_register() which takes a pointer to const, and comparing its address to another address, which does not modify it. Make it const to allow the compiler to put it in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28ip6gre: avoid tx_error when sending MLD/DAD on external tunnelsDavide Caratti
similarly to what has been done with commit 9d149045b3c0 ("geneve: change from tx_error to tx_dropped on missing metadata"), avoid reporting errors to userspace in case the kernel doesn't find any tunnel information for a skb that is going to be transmitted: an increase of tx_dropped is enough. tested with the following script: # for t in ip6gre ip6gretap ip6erspan; do > ip link add dev gre6-test0 type $t external > ip address add dev gre6-test0 2001:db8::1/64 > ip link set dev gre6-test0 up > sleep 30 > ip -s -j link show dev gre6-test0 | jq \ > '.[0].stats64.tx | {"errors": .errors, "dropped": .dropped}' > ip link del dev gre6-test0 > done Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28Merge branch 'net-smc-introduce-SMC-Dv2-support'David S. Miller
Karsten Graul says: ==================== net/smc: introduce SMC-Dv2 support SMC-Dv2 support (see https://www.ibm.com/support/pages/node/6326337) provides multi-subnet support for SMC-D, eliminating the current same-subnet restriction. The new version detects if any of the virtual ISM devices are on the same system and can therefore be used for an SMC-Dv2 connection. Furthermore, SMC-Dv2 eliminates the need for PNET IDs on s390. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net/smc: CLC decline - V2 enhancementsUrsula Braun
This patch covers the small SMCD version 2 changes for CLC decline. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net/smc: introduce CLC first contact extensionUrsula Braun
SMC Version 2 defines a first contact extension for CLC accept and CLC confirm. This patch covers sending and receiving of the CLC first contact extension. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net/smc: CLC accept / confirm V2Ursula Braun
The new format of SMCD V2 CLC accept and confirm is introduced, and building and checking of SMCD V2 CLC accepts / confirms is adapted accordingly. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net/smc: determine accepted ISM devicesUrsula Braun
SMCD Version 2 allows to propose up to 8 additional ISM devices offered to the peer as candidates for SMCD communication. This patch covers the server side, i.e. selection of an ISM device matching one of the proposed ISM devices, that will be used for CLC accept Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net/smc: build and send V2 CLC proposalUrsula Braun
The new format of an SMCD V2 CLC proposal is introduced, and building and checking of SMCD V2 CLC proposals is adapted accordingly. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net/smc: determine proposed ISM devicesUrsula Braun
SMCD Version 2 allows to propose up to 8 additional ISM devices offered to the peer as candidates for SMCD communication. This patch covers determination of the ISM devices to be proposed. ISM devices without PNETID are preferred, since ISM devices with PNETID are a V1 leftover and will disappear over the time. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net/smc: introduce list of pnetids for Ethernet devicesUrsula Braun
SMCD version 2 allows usage of ISM devices with hardware PNETID only, if an Ethernet net_device exists with the same hardware PNETID. This requires to maintain a list of pnetids belonging to Ethernet net_devices, which is covered by this patch. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net/smc: introduce CHID callback for ISM devicesUrsula Braun
With SMCD version 2 the CHIDs of ISM devices are needed for the CLC handshake. This patch provides the new callback to retrieve the CHID of an ISM device. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net/smc: introduce System Enterprise ID (SEID)Ursula Braun
SMCD version 2 defines a System Enterprise ID (short SEID). This patch contains the SEID creation and adds the callback to retrieve the created SEID. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net/smc: prepare for more proposed ISM devicesUrsula Braun
SMCD Version 2 allows proposing of up to 8 ISM devices in addition to the native ISM device of SMCD Version 1. This patch prepares the struct smc_init_info to deal with these additional 8 ISM devices. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net/smc: split CLC confirm/accept data to be sentUrsula Braun
When sending CLC confirm and CLC accept, separate the trailing part of the message from the initial part (to be prepared for future first contact extension). Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net/smc: separate find device functionsUrsula Braun
This patch provides better separation of device determinations in function smc_listen_work(). No functional change. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net/smc: CLC header fields renamingUrsula Braun
SMCD version 2 defines 2 more bits in the CLC header to specify version 2 types. This patch prepares better naming of the CLC header fields. No functional change. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net/smc: remove constant and introduce helper to check for a pnet idKarsten Graul
Use the existing symbol _S instead of SMC_ASCII_BLANK, and introduce a helper to check if a pnetid is set. No functional change. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net: Use kobj_to_dev() APIWang Qing
Use kobj_to_dev() instead of container_of(). Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net: mvneta: try to use in-irq pp cache in mvneta_txq_bufs_freeLorenzo Bianconi
Try to recycle the xdp tx buffer into the in-irq page_pool cache if mvneta_txq_bufs_free is executed in the NAPI context for XDP_TX use case Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28Merge branch '1GbE' of https://github.com/anguy11/next-queueDavid S. Miller
Tony Nguyen says: ==================== 1GbE Intel Wired LAN Driver Updates 2020-09-28 This series contains updates to igb, igc, and e1000e drivers. Sven Auhagen adds XDP support for igb. Gal Hammer allows for 82576 to display part number string correctly for igb. Sasha adds device IDs for i221 and i226 parts. Exposes LPI counters and removes unused fields in structures for igc. He also adds Meteor Lake support for e1000e. For igc, Andre renames IGC_TSYNCTXCTL_VALID to IGC_TSYNCTXCTL_TXTT_0 to match the datasheet and adds a warning if it's not set when expected. Removes the PTP Tx timestamp check in igc_ptp_tx_work() as it's already checked in the watchdog_task. Cleans up some code by removing invalid error bits, renaming a bit to match datasheet naming, and removing a, now unneeded, macro. Vinicius makes changes for igc PTP: removes calling SYSTIMR to latch timer value, stores PTP time before a reset, and rejects schedules with times in the future. v2: Remove 'inline' from igb_xdp_tx_queue_mapping() and igb_rx_offset() for patch 1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28e1000e: Add support for Meteor LakeSasha Neftin
Add devices IDs for the next LOM generations that will be available on the next Intel Client platform (Meteor Lake) This patch provides the initial support for these devices Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-28igc: Clean up nvm_info structureSasha Neftin
flash_bank_size and flash_base_addr field not in use and can be removed from a nvm_info structure Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-28igc: Reject schedules with a base_time in the futureVinicius Costa Gomes
When we set the BASET registers of i225 with a base_time in the future, i225 will "hold" all packets until that base_time is reached, causing a lot of TX Hangs. As this behaviour seems contrary to the expectations of the IEEE 802.1Q standard (section 8.6.9, especially 8.6.9.4.5), let's start by rejecting these types of schedules. If this is too limiting, we can for example, setup a timer to configure the BASET registers closer to the start time, only blocking the packets for a "short" while. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-28igc: Export a way to read the PTP timerVinicius Costa Gomes
The next patch will need a way to retrieve the current timestamp from the NIC's PTP clock. The 'i225' suffix is removed, if anything model specific is needed, those specifics should be hidden by this function. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-28igc: Remove reset disable flagSasha Neftin
Boolean reset disable flag not applicable for i225 device and could be removed. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit (git 2.34.1) at 2025-07-16 07:59:17 +0000