| Age | Commit message (Collapse) | Author |
|---|
|
When switching to drm_edid, we slightly changed how to get edid by
removing the possibility of getting them from dc_link when in aux
transaction mode. As MST doesn't initialize the connector with
`drm_connector_init_with_ddc()`, restore the original behavior to avoid
functional changes.
v2:
- Fix build warning of unchecked dereference (kernel test bot)
CC: Alex Hung <alex.hung@amd.com>
CC: Mario Limonciello <mario.limonciello@amd.com>
CC: Roman Li <Roman.Li@amd.com>
CC: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Fixes: 48edb2a4256e ("drm/amd/display: switch amdgpu_dm_connector to use struct drm_edid")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 81262b1656feb3813e3d917ab78824df6831e69e)
|
|
Map all of my previously used email addresses to my @igalia.com address.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 289387d0dbf806bd59063ab93d94f48cd4c75c7c)
Cc: stable@vger.kernel.org
|
|
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9b3ef540397cfc356f10f504841b2e9d16e31286)
Cc: stable@vger.kernel.org
|
|
Re-send the mes message on resume to make sure the
mes state is up to date.
Fixes: 8521e3c5f058 ("drm/amd/amdgpu: limit single process inside MES")
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Shaoyun Liu <shaoyun.liu@amd.com>
Cc: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 27b791514789844e80da990c456c2465325e0851)
|
|
This should not be called on chips without MES so check if
MES is enabled and if the cleaner shader is supported.
Fixes: 8521e3c5f058 ("drm/amd/amdgpu: limit single process inside MES")
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Shaoyun Liu <shaoyun.liu@amd.com>
Cc: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
(cherry picked from commit 80513e389765c8f9543b26d8fa4bbdf0e59ff8bc)
|
|
Xinhui's email is no longer valid.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c19390ca9094dfcbc16d96b233a409c01e21d85b)
Cc: stable@vger.kernel.org
|
|
There was a quirk added to add a workaround for a Sapphire
RX 5600 XT Pulse that didn't allow BAR resizing. However,
the quirk caused a regression with runtime pm on Dell laptops
using those chips, rather than narrowing the scope of the
resizing quirk, add a quirk to prevent amdgpu from resizing
the BAR on those Dell platforms unless runtime pm is disabled.
v2: update commit message, add runpm check
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1707
Fixes: 907830b0fc9e ("PCI: Add a REBAR size quirk for Sapphire RX 5600 XT Pulse")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5235053f443cef4210606e5fb71f99b915a9723d)
Cc: stable@vger.kernel.org
|
|
When userspace applications call AMDKFD_IOC_UPDATE_QUEUE. Preserve
bitfields that do not need to be modified as they contain flags to
track queue states that are used by CP FW.
Signed-off-by: David Yat Sin <David.YatSin@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8150827990b709ab5a40c46c30d21b7f7b9e9440)
Cc: stable@vger.kernel.org
|
|
resume and irq handler happily races in set_power_state()
* amdgpu_legacy_dpm_compute_clocks() needs lock
* protect irq work handler
* fix dpm_enabled usage
v2: fix clang build, integrate Lijo's comments (Alex)
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2524
Fixes: 3712e7a49459 ("drm/amd/pm: unified lock protections in amdgpu_dpm.c")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Tested-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> # on Oland PRO
Signed-off-by: chr[] <chris@rudorff.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ee3dc9e204d271c9c7a8d4d38a0bce4745d33e71)
Cc: stable@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Use __readahead_folio() in fuse again to fix a UAF issue
when using splice
- Remove d_op->d_delete method from pidfs
- Remove d_op->d_delete method from nsfs
- Simplify iomap_dio_bio_iter()
- Fix a UAF in ovl_dentry_update_reval
- Fix a miscalulated file range for filemap_fdatawrite_range_kick()
- Don't skip skip dirty page in folio_unmap_invalidate()
* tag 'vfs-6.14-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: Minor code simplification in iomap_dio_bio_iter()
nsfs: remove d_op->d_delete
pidfs: remove d_op->d_delete
mm/truncate: don't skip dirty page in folio_unmap_invalidate()
mm/filemap: fix miscalculated file range for filemap_fdatawrite_range_kick()
fuse: don't truncate cached, mutated symlink
ovl: fix UAF in ovl_dentry_update_reval by moving dput() in ovl_link_up
fuse: revert back to __readahead_folio() for readahead
|
|
Match the compat part of io_sendmsg_copy_hdr() with its counterpart and
save msg_control.
Fixes: c55978024d123 ("io_uring/net: move receive multishot out of the generic msghdr path")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2a8418821fe83d3b64350ad2b3c0303e9b732bbd.1740498502.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ASUS VivoBook 15 with SSID 1043:1460 took an incorrect quirk via the
pin pattern matching for ASUS (ALC256_FIXUP_ASUS_MIC), resulting in
the two built-in mic pins (0x13 and 0x1b). This had worked without
problems casually in the past because the right pin (0x1b) was picked
up as the primary device. But since we fixed the pin enumeration for
other bugs, the bogus one (0x13) is picked up as the primary device,
hence the bug surfaced now.
For addressing the regression, this patch explicitly specifies the
quirk entry with ALC256_FIXUP_ASUS_MIC_NO_PRESENCE, which sets up only
the headset mic pin.
Fixes: 3b4309546b48 ("ALSA: hda: Fix headset detection failure due to unstable sort")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219807
Link: https://patch.msgid.link/20250225154540.13543-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Using PAGE_SIZE as a minimum expected DMA segment size in consideration
of devices which have a max DMA segment size of < 64k when used on 64k
PAGE_SIZE systems leads to devices not being able to probe such as
eMMC and Exynos UFS controller [0] [1] you can end up with a probe failure
as follows:
WARNING: CPU: 2 PID: 397 at block/blk-settings.c:339 blk_validate_limits+0x364/0x3c0
Ensure we use min(max_seg_size, seg_boundary_mask + 1) as the new min segment
size when max segment size is < PAGE_SIZE for 16k and 64k base page size systems.
If anyone need to backport this patch, the following commits are depended:
commit 6aeb4f836480 ("block: remove bio_add_pc_page")
commit 02ee5d69e3ba ("block: remove blk_rq_bio_prep")
commit b7175e24d6ac ("block: add a dma mapping iterator")
Link: https://lore.kernel.org/linux-block/20230612203314.17820-1-bvanassche@acm.org/ # [0]
Link: https://lore.kernel.org/linux-block/1d55e942-5150-de4c-3a02-c3d066f87028@acm.org/ # [1]
Cc: Yi Zhang <yi.zhang@redhat.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Keith Busch <kbusch@kernel.org>
Tested-by: Paul Bunyan <pbunyan@redhat.com>
Reviewed-by: Daniel Gomez <da.gomez@kernel.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250225022141.2154581-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
fixp2int always rounds down, fixp2int_ceil rounds up. We need
the new fixp2int_round.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220043410.416867-3-alex.hung@amd.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
|
|
When SPI is used for control, the driver must hold the SPI bus lock
while issuing the sequence of writes to perform a soft reset.
>From the time the driver writes the SYSTEM_RESET command until the
driver does a write to terminate the reset, there must not be any
activity on the SPI bus lines. If there is any SPI activity during the
soft-reset, another soft-reset will be triggered. The state of the SPI
chip select is irrelevant.
A repeated soft-reset does not in itself cause any problems, and it is
not an infinite loop. The problem is a race between these resets and
the driver polling for boot completion. There is a time window between
soft resets where the driver could read HALO_STATE as 2 (fully booted)
while the chip is actually soft-resetting. Although this window is
small, it is long enough that it is possible to hit it in normal
operation.
To prevent this race and ensure the chip really is fully booted, the
driver calls spi_bus_lock() to prevent other activity while resetting.
It then issues the SYSTEM_RESET mailbox command. After allowing
sufficient time for reset to take effect, the driver issues a PING
mailbox command, which will force completion of the full soft-reset
sequence. The SPI bus lock can then be released. The mailbox is
checked for any boot or wakeup response from the firmware, before the
value in HALO_STATE will be trusted.
This does not affect SoundWire or I2C control.
Fixes: 8a731fd37f8b ("ASoC: cs35l56: Move utility functions to shared file")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250225131843.113752-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Change calls to async regmap write functions to use the normal
blocking writes so that the cs35l56 driver can use spi_bus_lock() to
gain exclusive access to the SPI bus.
As this is part of a fix, it makes only the minimal change to swap the
functions to the blocking equivalents. There's no need to risk
reworking the buffer allocation logic that is now partially redundant.
The async writes are a 12-year-old workaround for inefficiency of
synchronous writes in the SPI subsystem. The SPI subsystem has since
been changed to avoid the overheads, so this workaround should not be
necessary.
The cs35l56 driver needs to use spi_bus_lock() prevent bus activity
while it is soft-resetting the cs35l56. But spi_bus_lock() is
incompatible with spi_async() calls, which will fail with -EBUSY.
Fixes: 8a731fd37f8b ("ASoC: cs35l56: Move utility functions to shared file")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250225131843.113752-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
OA exponent value of 0 is a valid value for periodic reports. Allow user
to pass 0 for the OA sampling interval since it gets converted to 2 gt
clock ticks.
v2: Update the check in xe_oa_stream_init as well (Ashutosh)
v3: Fix mi-rpc failure by setting default exponent to -1 (CI)
v4: Add the Fixes tag
Fixes: b6fd51c62119 ("drm/xe/oa/uapi: Define and parse OA stream properties")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250221213352.1712932-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 30341f0b8ea71725cc4ab2c43e3a3b749892fc92)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
A low attr::freq value cannot be set via IOC_PERIOD on some platforms.
The perf_event_check_period() introduced in:
81ec3f3c4c4d ("perf/x86: Add check_period PMU callback")
was intended to check the period, rather than the frequency.
A low frequency may be mistakenly rejected by limit_period().
Fix it.
Fixes: 81ec3f3c4c4d ("perf/x86: Add check_period PMU callback")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250117151913.3043942-2-kan.liang@linux.intel.com
Closes: https://lore.kernel.org/lkml/20250115154949.3147-1-ravi.bangoria@amd.com/
|
|
Perf doesn't work at low frequencies:
$ perf record -e cpu_core/instructions/ppp -F 120
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument)
for event (cpu_core/instructions/ppp).
"dmesg | grep -i perf" may provide additional information.
The limit_period() check avoids a low sampling period on a counter. It
doesn't intend to limit the frequency.
The check in the x86_pmu_hw_config() should be limited to non-freq mode.
The attr.sample_period and attr.sample_freq are union. The
attr.sample_period should not be used to indicate the frequency mode.
Fixes: c46e665f0377 ("perf/x86: Add INST_RETIRED.ALL workarounds")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250117151913.3043942-1-kan.liang@linux.intel.com
Closes: https://lore.kernel.org/lkml/20250115154949.3147-1-ravi.bangoria@amd.com/
|
|
Typically, SoundWire MIC and PCH DMIC will not coexist. However, we may
want to use both of them in some special cases. Add a warning to let
users know that SoundWire MIC and PCH DMIC are both present and they
could overwrite it with kernel params.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250225093716.67240-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently, we assume that the PCH DMIC pins are pin-muxed with SoundWire
links. However, we do see a HW design that use PCH DMIC along with 3
SoundWire links. Remove the check now.
With this change the PCM DMIC will be presented if it is reported by the
BIOS irrespective of whether there are SDW links present or not.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250225093716.67240-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Jason has been helping as reviewer for this area already, and has
contributed various features directly, notably BPF timestamping.
Also extend coverage to all timestamping tests, including those new
with BPF timestamping.
Link: https://lore.kernel.org/netdev/20250220072940.99994-1-kerneljasonxing@gmail.com/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250222172839.642079-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We found an issue when using bpf_redirect with ipvs NAT mode after
commit ff70202b2d1a ("dev_forward_skb: do not scrub skb mark within
the same name space"). Particularly, we use bpf_redirect to return
the skb directly back to the netif it comes from, i.e., xnet is
false in skb_scrub_packet(), and then ipvs_property is preserved
and SNAT is skipped in the rx path.
ipvs_property has been already cleared when netns is changed in
commit 2b5ec1a5f973 ("netfilter/ipvs: clear ipvs_property flag when
SKB net namespace changed"). This patch just clears it in spite of
netns.
Fixes: 2b5ec1a5f973 ("netfilter/ipvs: clear ipvs_property flag when SKB net namespace changed")
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Link: https://patch.msgid.link/20250222033518.126087-1-lulie@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
params->total_weight is not initialized during bind and not updated when
the bound cdev changes. The cooling device weight will not be used due
to the uninitialized total_weight, until an update via sysfs is
triggered.
The bound cdevs are updated during thermal zone registration, where each
cooling device will be bound to the thermal zone one by one, but
power_allocator_bind() can be called without an additional cdev update
when manually changing the policy of a thermal zone via sysfs.
Add a new function to handle weight update logic, including updating
total_weight, and call it when bind, weight changes, and cdev updates to
ensure total_weight is always correct.
Fixes: a3cd6db4cc2e ("thermal: gov_power_allocator: Support new update callback of weights")
Signed-off-by: Yu-Che Cheng <giver@chromium.org>
Link: https://patch.msgid.link/20250222-fix-power-allocator-weight-v2-1-a94de86b685a@chromium.org
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since thermal_of_should_bind() terminates the loop after processing
the first child found in cooling-maps, it will never match more than
one cdev to a given trip point which is incorrect, as there may be
cooling-maps associating one trip point with multiple cooling devices.
Address this by letting the loop continue until either all
children have been processed or a matching one has been found.
To avoid adding conditionals or goto statements, put the loop in
question into a separate function and make that function return
right away after finding a matching cooling-maps entry.
Fixes: 94c6110b0b13 ("thermal/of: Use the .should_bind() thermal zone callback")
Link: https://lore.kernel.org/linux-pm/20250219-fix-thermal-of-v1-1-de36e7a590c4@chromium.org/
Reported-by: Yu-Che Cheng <giver@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Yu-Che Cheng <giver@chromium.org>
Tested-by: Yu-Che Cheng <giver@chromium.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/2788228.mvXUDI8C0e@rjwysocki.net
|
|
Combine 'else' and 'if' conditional statements onto a single line and drop
unrequired braces, as is standard coding style.
The code had been like this since commit c3b0e880bbfa ("iomap: support
REQ_OP_ZONE_APPEND").
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250224154538.548028-1-john.g.garry@oracle.com
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for cacheinfo DT probing to avoid reading non-boolean
properties as booleans.
- A fix for cpufeature to use bitmap_equal() instead of memcmp(), so
unused bits are ignored.
- Fixes for cmpxchg and futex cmpxchg that properly encode the sign
extension requirements on inline asm, which results in spurious
successes. This manifests in at least inode_set_ctime_current, but is
likely just a disaster waiting to happen.
- A fix for the rseq selftests, which was using an invalid constraint.
- A pair of fixes for signal frame size handling:
- We were reserving space for an extra empty extension context
header on systems with extended signal context, thus resulting in
unnecessarily large allocations.
- We weren't properly checking for available extensions before
calculating the signal stack size, which resulted in undersized
stack allocations on some systems (at least those with T-Head
custom vectors).
Also, we've added Alex as a reviewer. He's been helping out a ton
lately, thanks!
* tag 'riscv-for-linus-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
MAINTAINERS: Add myself as a riscv reviewer
riscv: signal: fix signal_minsigstksz
riscv: signal: fix signal frame size
rseq/selftests: Fix riscv rseq_offset_deref_addv inline asm
riscv/futex: sign extend compare value in atomic cmpxchg
riscv/atomic: Do proper sign extension also for unsigned in arch_cmpxchg
riscv: cpufeature: use bitmap_equal() instead of memcmp()
riscv: cacheinfo: Use of_property_present() for non-boolean properties
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mikulas Patocka:
- dm-vdo: add missing spin_lock_init
- dm-integrity: divide-by-zero fix
- dm-integrity: do not report unused entries in the table line
* tag 'for-6.14/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm vdo: add missing spin_lock_init
dm-integrity: Do not emit journal configuration in DM table for Inline mode
dm-integrity: Avoid divide by zero in table status in Inline mode
|
|
Test XDP and HDS interaction. While at it add a test for using the IOCTL,
as that turned out to be the real culprit.
Testing bnxt:
# NETIF=eth0 ./ksft-net-drv/drivers/net/hds.py
KTAP version 1
1..12
ok 1 hds.get_hds
ok 2 hds.get_hds_thresh
ok 3 hds.set_hds_disable # SKIP disabling of HDS not supported by the device
ok 4 hds.set_hds_enable
ok 5 hds.set_hds_thresh_zero
ok 6 hds.set_hds_thresh_max
ok 7 hds.set_hds_thresh_gt
ok 8 hds.set_xdp
ok 9 hds.enabled_set_xdp
ok 10 hds.ioctl
ok 11 hds.ioctl_set_xdp
ok 12 hds.ioctl_enabled_set_xdp
# Totals: pass:11 fail:0 xfail:0 xpass:0 skip:1 error:0
and netdevsim:
# ./ksft-net-drv/drivers/net/hds.py
KTAP version 1
1..12
ok 1 hds.get_hds
ok 2 hds.get_hds_thresh
ok 3 hds.set_hds_disable
ok 4 hds.set_hds_enable
ok 5 hds.set_hds_thresh_zero
ok 6 hds.set_hds_thresh_max
ok 7 hds.set_hds_thresh_gt
ok 8 hds.set_xdp
ok 9 hds.enabled_set_xdp
ok 10 hds.ioctl
ok 11 hds.ioctl_set_xdp
ok 12 hds.ioctl_enabled_set_xdp
# Totals: pass:12 fail:0 xfail:0 xpass:0 skip:0 error:0
Netdevsim needs a sane default for tx/rx ring size.
ethtool 6.11 is needed for the --disable-netlink option.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Tested-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250221025141.1132944-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The legacy ioctl path does not have support for extended attributes.
So we issue a GET to fetch the current settings from the driver,
in an attempt to keep them unchanged. HDS is a bit "special" as
the GET only returns on/off while the SET takes a "ternary" argument
(on/off/default). If the driver was in the "default" setting -
executing the ioctl path binds it to on or off, even tho the user
did not intend to change HDS config.
Factor the relevant logic out of the netlink code and reuse it.
Fixes: 87c8f8496a05 ("bnxt_en: add support for tcp-data-split ethtool command")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Tested-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250221025141.1132944-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently we treat EFAULT from hmm_range_fault() as a non-fatal error
when called from xe_vm_userptr_pin() with the idea that we want to avoid
killing the entire vm and chucking an error, under the assumption that
the user just did an unmap or something, and has no intention of
actually touching that memory from the GPU. At this point we have
already zapped the PTEs so any access should generate a page fault, and
if the pin fails there also it will then become fatal.
However it looks like it's possible for the userptr vma to still be on
the rebind list in preempt_rebind_work_func(), if we had to retry the
pin again due to something happening in the caller before we did the
rebind step, but in the meantime needing to re-validate the userptr and
this time hitting the EFAULT.
This explains an internal user report of hitting:
[ 191.738349] WARNING: CPU: 1 PID: 157 at drivers/gpu/drm/xe/xe_res_cursor.h:158 xe_pt_stage_bind.constprop.0+0x60a/0x6b0 [xe]
[ 191.738551] Workqueue: xe-ordered-wq preempt_rebind_work_func [xe]
[ 191.738616] RIP: 0010:xe_pt_stage_bind.constprop.0+0x60a/0x6b0 [xe]
[ 191.738690] Call Trace:
[ 191.738692] <TASK>
[ 191.738694] ? show_regs+0x69/0x80
[ 191.738698] ? __warn+0x93/0x1a0
[ 191.738703] ? xe_pt_stage_bind.constprop.0+0x60a/0x6b0 [xe]
[ 191.738759] ? report_bug+0x18f/0x1a0
[ 191.738764] ? handle_bug+0x63/0xa0
[ 191.738767] ? exc_invalid_op+0x19/0x70
[ 191.738770] ? asm_exc_invalid_op+0x1b/0x20
[ 191.738777] ? xe_pt_stage_bind.constprop.0+0x60a/0x6b0 [xe]
[ 191.738834] ? ret_from_fork_asm+0x1a/0x30
[ 191.738849] bind_op_prepare+0x105/0x7b0 [xe]
[ 191.738906] ? dma_resv_reserve_fences+0x301/0x380
[ 191.738912] xe_pt_update_ops_prepare+0x28c/0x4b0 [xe]
[ 191.738966] ? kmemleak_alloc+0x4b/0x80
[ 191.738973] ops_execute+0x188/0x9d0 [xe]
[ 191.739036] xe_vm_rebind+0x4ce/0x5a0 [xe]
[ 191.739098] ? trace_hardirqs_on+0x4d/0x60
[ 191.739112] preempt_rebind_work_func+0x76f/0xd00 [xe]
Followed by NPD, when running some workload, since the sg was never
actually populated but the vma is still marked for rebind when it should
be skipped for this special EFAULT case. This is confirmed to fix the
user report.
v2 (MattB):
- Move earlier.
v3 (MattB):
- Update the commit message to make it clear that this indeed fixes the
issue.
Fixes: 521db22a1d70 ("drm/xe: Invalidate userptr VMA on page pin fault")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250221143840.167150-5-matthew.auld@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 6b93cb98910c826c2e2004942f8b060311e43618)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
On error restore anything still on the pin_list back to the invalidation
list on error. For the actual pin, so long as the vma is tracked on
either list it should get picked up on the next pin, however it looks
possible for the vma to get nuked but still be present on this per vm
pin_list leading to corruption. An alternative might be then to instead
just remove the link when destroying the vma.
v2:
- Also add some asserts.
- Keep the overzealous locking so that we are consistent with the docs;
updating the docs and related bits will be done as a follow up.
Fixes: ed2bdf3b264d ("drm/xe/vm: Subclass userptr vmas")
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250221143840.167150-4-matthew.auld@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 4e37e928928b730de9aa9a2f5dc853feeebc1742)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Marek has graciously offered to maintain the dma-mapping tree.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Joel will go back to maintain configfs alone on a time permitting basis.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We triggered the following crash in syzkaller tests:
BUG: Bad page state in process syz.7.38 pfn:1eff3
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1eff3
flags: 0x3fffff00004004(referenced|reserved|node=0|zone=1|lastcpupid=0x1fffff)
raw: 003fffff00004004 ffffe6c6c07bfcc8 ffffe6c6c07bfcc8 0000000000000000
raw: 0000000000000000 0000000000000000 00000000fffffffe 0000000000000000
page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x32/0x50
bad_page+0x69/0xf0
free_unref_page_prepare+0x401/0x500
free_unref_page+0x6d/0x1b0
uprobe_write_opcode+0x460/0x8e0
install_breakpoint.part.0+0x51/0x80
register_for_each_vma+0x1d9/0x2b0
__uprobe_register+0x245/0x300
bpf_uprobe_multi_link_attach+0x29b/0x4f0
link_create+0x1e2/0x280
__sys_bpf+0x75f/0xac0
__x64_sys_bpf+0x1a/0x30
do_syscall_64+0x56/0x100
entry_SYSCALL_64_after_hwframe+0x78/0xe2
BUG: Bad rss-counter state mm:00000000452453e0 type:MM_FILEPAGES val:-1
The following syzkaller test case can be used to reproduce:
r2 = creat(&(0x7f0000000000)='./file0\x00', 0x8)
write$nbd(r2, &(0x7f0000000580)=ANY=[], 0x10)
r4 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x42, 0x0)
mmap$IORING_OFF_SQ_RING(&(0x7f0000ffd000/0x3000)=nil, 0x3000, 0x0, 0x12, r4, 0x0)
r5 = userfaultfd(0x80801)
ioctl$UFFDIO_API(r5, 0xc018aa3f, &(0x7f0000000040)={0xaa, 0x20})
r6 = userfaultfd(0x80801)
ioctl$UFFDIO_API(r6, 0xc018aa3f, &(0x7f0000000140))
ioctl$UFFDIO_REGISTER(r6, 0xc020aa00, &(0x7f0000000100)={{&(0x7f0000ffc000/0x4000)=nil, 0x4000}, 0x2})
ioctl$UFFDIO_ZEROPAGE(r5, 0xc020aa04, &(0x7f0000000000)={{&(0x7f0000ffd000/0x1000)=nil, 0x1000}})
r7 = bpf$PROG_LOAD(0x5, &(0x7f0000000140)={0x2, 0x3, &(0x7f0000000200)=ANY=[@ANYBLOB="1800000000120000000000000000000095"], &(0x7f0000000000)='GPL\x00', 0x7, 0x0, 0x0, 0x0, 0x0, '\x00', 0x0, @fallback=0x30, 0xffffffffffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x10, 0x0, @void, @value}, 0x94)
bpf$BPF_LINK_CREATE_XDP(0x1c, &(0x7f0000000040)={r7, 0x0, 0x30, 0x1e, @val=@uprobe_multi={&(0x7f0000000080)='./file0\x00', &(0x7f0000000100)=[0x2], 0x0, 0x0, 0x1}}, 0x40)
The cause is that zero pfn is set to the PTE without increasing the RSS
count in mfill_atomic_pte_zeropage() and the refcount of zero folio does
not increase accordingly. Then, the operation on the same pfn is performed
in uprobe_write_opcode()->__replace_page() to unconditional decrease the
RSS count and old_folio's refcount.
Therefore, two bugs are introduced:
1. The RSS count is incorrect, when process exit, the check_mm() report
error "Bad rss-count".
2. The reserved folio (zero folio) is freed when folio->refcount is zero,
then free_pages_prepare->free_page_is_bad() report error
"Bad page state".
There is more, the following warning could also theoretically be triggered:
__replace_page()
-> ...
-> folio_remove_rmap_pte()
-> VM_WARN_ON_FOLIO(is_zero_folio(folio), folio)
Considering that uprobe hit on the zero folio is a very rare case, just
reject zero old folio immediately after get_user_page_vma_remote().
[ mingo: Cleaned up the changelog ]
Fixes: 7396fa818d62 ("uprobes/core: Make background page replacement logic account for rss_stat counters")
Fixes: 2b1444983508 ("uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints")
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20250224031149.1598949-1-tongtiangen@huawei.com
|
|
Some tools like KGraphViewer interpret the "ON" nodes not having an
explicitly set fill colour as them being entirely black, which obscures
the text on them and looks funny. In fact, I thought they were off for
the longest time. Comparing to the output of the `dot` tool, I assume
they are supposed to be white.
Instead of speclawyering over who's in the wrong and must immediately
atone for their wickedness at the altar of RFC2119, just be explicit
about it, set the fillcolor to white, and nobody gets confused.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20250221-dapm-graph-node-colour-v1-1-514ed0aa7069@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If stream names of DAI driver are duplicated there'll be warnings when
machine driver tries to add widgets on a route:
[ 8.831335] fsl-asoc-card sound-wm8960: ASoC: sink widget CPU-Playback overwritten
[ 8.839917] fsl-asoc-card sound-wm8960: ASoC: source widget CPU-Capture overwritten
Use different stream names to avoid such warnings.
DAI names in AUDMIX are also updated accordingly.
Fixes: 15c958390460 ("ASoC: fsl_sai: Add separate DAI for transmitter and receiver")
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://patch.msgid.link/20250217010437.258621-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Syskaller triggers a warning due to prev_epc->pmu != next_epc->pmu in
perf_event_swap_task_ctx_data(). vmcore shows that two lists have the same
perf_event_pmu_context, but not in the same order.
The problem is that the order of pmu_ctx_list for the parent is impacted by
the time when an event/PMU is added. While the order for a child is
impacted by the event order in the pinned_groups and flexible_groups. So
the order of pmu_ctx_list in the parent and child may be different.
To fix this problem, insert the perf_event_pmu_context to its proper place
after iteration of the pmu_ctx_list.
The follow testcase can trigger above warning:
# perf record -e cycles --call-graph lbr -- taskset -c 3 ./a.out &
# perf stat -e cpu-clock,cs -p xxx // xxx is the pid of a.out
test.c
void main() {
int count = 0;
pid_t pid;
printf("%d running\n", getpid());
sleep(30);
printf("running\n");
pid = fork();
if (pid == -1) {
printf("fork error\n");
return;
}
if (pid == 0) {
while (1) {
count++;
}
} else {
while (1) {
count++;
}
}
}
The testcase first opens an LBR event, so it will allocate task_ctx_data,
and then open tracepoint and software events, so the parent context will
have 3 different perf_event_pmu_contexts. On inheritance, child ctx will
insert the perf_event_pmu_context in another order and the warning will
trigger.
[ mingo: Tidied up the changelog. ]
Fixes: bd2756811766 ("perf: Rewrite core context handling")
Signed-off-by: Luo Gengkun <luogengkun@huaweicloud.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20250122073356.1824736-1-luogengkun@huaweicloud.com
|
|
into HEAD
KVM/riscv fixes for 6.14, take #1
- Fix hart status check in SBI HSM extension
- Fix hart suspend_type usage in SBI HSM extension
- Fix error returned by SBI IPI and TIME extensions for
unsupported function IDs
- Fix suspend_type usage in SBI SUSP extension
- Remove unnecessary vcpu kick after injecting interrupt
via IMSIC guest file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.14, take #3
- Fix TCR_EL2 configuration to not use the ASID in TTBR1_EL2
and not mess-up T1SZ/PS by using the HCR_EL2.E2H==0 layout.
- Bring back the VMID allocation to the vcpu_load phase, ensuring
that we only setup VTTBR_EL2 once on VHE. This cures an ugly
race that would lead to running with an unallocated VMID.
|
|
The perf_iterate_ctx() function performs RCU list traversal but
currently lacks RCU read lock protection. This causes lockdep warnings
when running perf probe with unshare(1) under CONFIG_PROVE_RCU_LIST=y:
WARNING: suspicious RCU usage
kernel/events/core.c:8168 RCU-list traversed in non-reader section!!
Call Trace:
lockdep_rcu_suspicious
? perf_event_addr_filters_apply
perf_iterate_ctx
perf_event_exec
begin_new_exec
? load_elf_phdrs
load_elf_binary
? lock_acquire
? find_held_lock
? bprm_execve
bprm_execve
do_execveat_common.isra.0
__x64_sys_execve
do_syscall_64
entry_SYSCALL_64_after_hwframe
This protection was previously present but was removed in commit
bd2756811766 ("perf: Rewrite core context handling"). Add back the
necessary rcu_read_lock()/rcu_read_unlock() pair around
perf_iterate_ctx() call in perf_event_exec().
[ mingo: Use scoped_guard() as suggested by Peter ]
Fixes: bd2756811766 ("perf: Rewrite core context handling")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250117-fix_perf_rcu-v1-1-13cb9210fc6a@debian.org
|
|
The ES8328 codec driver, which is also used for the ES8388 chip that
appears to have an identical register map, claims that the output can
either take the route from DAC->Mixer->Output or through DAC->Output
directly. To the best of what I could find, this is not true, and
creates problems.
Without DACCONTROL17 bit index 7 set for the left channel, as well as
DACCONTROL20 bit index 7 set for the right channel, I cannot get any
analog audio out on Left Out 2 and Right Out 2 respectively, despite the
DAPM routes claiming that this should be possible. Furthermore, the same
is the case for Left Out 1 and Right Out 1, showing that those two don't
have a direct route from DAC to output bypassing the mixer either.
Those control bits toggle whether the DACs are fed (stale bread?) into
their respective mixers. If one "unmutes" the mixer controls in
alsamixer, then sure, the audio output works, but if it doesn't work
without the mixer being fed the DAC input then evidently it's not a
direct output from the DAC.
ES8328/ES8388 are seemingly not alone in this. ES8323, which uses a
separate driver for what appears to be a very similar register map,
simply flips those two bits on in its probe function, and then pretends
there is no power management whatsoever for the individual controls.
Fair enough.
My theory as to why nobody has noticed this up to this point is that
everyone just assumes it's their fault when they had to unmute an
additional control in ALSA.
Fix this in the es8328 driver by removing the erroneous direct route,
then get rid of the playback switch controls and have those bits tied to
the mixer's widget instead, which until now had no register to play
with.
Fixes: 567e4f98922c ("ASoC: add es8328 codec driver")
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20250222-es8328-route-bludgeoning-v1-1-99bfb7fb22d9@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
|
|
Nsfs only deals with unhashed dentries and there's currently no way for
them to become hashed. So remove d_op->d_delete.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pidfs only deals with unhashed dentries and there's currently no way for
them to become hashed. So remove d_op->d_delete.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When the kernel is compiled without LED framework support the
rtl8366rb fails to build like this:
rtl8366rb.o: in function `rtl8366rb_setup_led':
rtl8366rb.c:953:(.text.unlikely.rtl8366rb_setup_led+0xe8):
undefined reference to `led_init_default_state_get'
rtl8366rb.c:980:(.text.unlikely.rtl8366rb_setup_led+0x240):
undefined reference to `devm_led_classdev_register_ext'
As this is constantly coming up in different randconfig builds,
bite the bullet and create a separate file for the offending
code, split out a header with all stuff needed both in the
core driver and the leds code.
Add a new bool Kconfig option for the LED compile target, such
that it depends on LEDS_CLASS=y || LEDS_CLASS=RTL8366RB
which make LED support always available when LEDS_CLASS is
compiled into the kernel and enforce that if the LEDS_CLASS
is a module, then the RTL8366RB driver needs to be a module
as well so that modprobe can resolve the dependencies.
Fixes: 32d617005475 ("net: dsa: realtek: add LED drivers for rtl8366rb")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502070525.xMUImayb-lkp@intel.com/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reviewed-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"Revert one cleanup which turned out to eat too much stack space"
* tag 'i2c-for-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: core: Allocate temporary client dynamically
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
- Have qcom_edac use the correct interrupt enable register to configure
the RAS interrupt lines
* tag 'edac_urgent_for_v6.14_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/qcom: Correct interrupt enable register configuration
|
