summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-02-14selftests/landlock: Test that MPTCP actions are not restrictedMikhail Ivanov
Extend protocol fixture with test suits for MPTCP protocol. Add CONFIG_MPTCP and CONFIG_MPTCP_IPV6 options in config. Signed-off-by: Mikhail Ivanov <ivanov.mikhail1@huawei-partners.com> Link: https://lore.kernel.org/r/20250205093651.1424339-4-ivanov.mikhail1@huawei-partners.com Cc: <stable@vger.kernel.org> # 6.7.x Signed-off-by: Mickaël Salaün <mic@digikod.net>
2025-02-14selftests/landlock: Test TCP accesses with protocol=IPPROTO_TCPMikhail Ivanov
Extend protocol_variant structure with protocol field (Cf. socket(2)). Extend protocol fixture with TCP test suits with protocol=IPPROTO_TCP which can be used as an alias for IPPROTO_IP (=0) in socket(2). Signed-off-by: Mikhail Ivanov <ivanov.mikhail1@huawei-partners.com> Link: https://lore.kernel.org/r/20250205093651.1424339-3-ivanov.mikhail1@huawei-partners.com Cc: <stable@vger.kernel.org> # 6.7.x Signed-off-by: Mickaël Salaün <mic@digikod.net>
2025-02-14landlock: Fix non-TCP sockets restrictionMikhail Ivanov
Use sk_is_tcp() to check if socket is TCP in bind(2) and connect(2) hooks. SMC, MPTCP, SCTP protocols are currently restricted by TCP access rights. The purpose of TCP access rights is to provide control over ports that can be used by userland to establish a TCP connection. Therefore, it is incorrect to deny bind(2) and connect(2) requests for a socket of another protocol. However, SMC, MPTCP and RDS implementations use TCP internal sockets to establish communication or even to exchange packets over a TCP connection [1]. Landlock rules that configure bind(2) and connect(2) usage for TCP sockets should not cover requests for sockets of such protocols. These protocols have different set of security issues and security properties, therefore, it is necessary to provide the userland with the ability to distinguish between them (eg. [2]). Control over TCP connection used by other protocols can be achieved with upcoming support of socket creation control [3]. [1] https://lore.kernel.org/all/62336067-18c2-3493-d0ec-6dd6a6d3a1b5@huawei-partners.com/ [2] https://lore.kernel.org/all/20241204.fahVio7eicim@digikod.net/ [3] https://lore.kernel.org/all/20240904104824.1844082-1-ivanov.mikhail1@huawei-partners.com/ Closes: https://github.com/landlock-lsm/linux/issues/40 Fixes: fff69fb03dde ("landlock: Support network rules with TCP bind and connect") Signed-off-by: Mikhail Ivanov <ivanov.mikhail1@huawei-partners.com> Link: https://lore.kernel.org/r/20250205093651.1424339-2-ivanov.mikhail1@huawei-partners.com [mic: Format commit message to 72 columns] Signed-off-by: Mickaël Salaün <mic@digikod.net>
2025-02-14landlock: Minor typo and grammar fixes in IPC scoping documentationGünther Noack
* Fix some whitespace, punctuation and minor grammar. * Add a missing sentence about the minimum ABI version, to stay in line with the section next to it. Cc: Tahera Fahimi <fahimitahera@gmail.com> Cc: Tanya Agarwal <tanyaagarwal25699@gmail.com> Signed-off-by: Günther Noack <gnoack@google.com> Link: https://lore.kernel.org/r/20250124154445.162841-1-gnoack@google.com [mic: Add newlines, update doc date] Signed-off-by: Mickaël Salaün <mic@digikod.net>
2025-02-14landlock: Fix grammar errorTanya Agarwal
Fix grammar error in comments that were identified using the codespell tool. Signed-off-by: Tanya Agarwal <tanyaagarwal25699@gmail.com> Reviewed-by: Günther Noack <gnoack@google.com> Link: https://lore.kernel.org/r/20250123194208.2660-1-tanyaagarwal25699@gmail.com [mic: Simplify commit message] Signed-off-by: Mickaël Salaün <mic@digikod.net>
2025-02-14selftests/landlock: Enable the new CONFIG_AF_UNIX_OOBMickaël Salaün
Since commit 5155cbcdbf03 ("af_unix: Add a prompt to CONFIG_AF_UNIX_OOB"), the Landlock selftests's configuration is not enough to build a minimal kernel. Because scoped_signal_test checks with the MSG_OOB flag, we need to enable CONFIG_AF_UNIX_OOB for tests: # RUN fown.no_sandbox.sigurg_socket ... # scoped_signal_test.c:420:sigurg_socket:Expected 1 (1) == send(client_socket, ".", 1, MSG_OOB) (-1) # sigurg_socket: Test terminated by assertion # FAIL fown.no_sandbox.sigurg_socket ... Cc: Günther Noack <gnoack@google.com> Acked-by: Florent Revest <revest@chromium.org> Link: https://lore.kernel.org/r/20250211132531.1625566-1-mic@digikod.net Signed-off-by: Mickaël Salaün <mic@digikod.net>
2025-02-14USB: Add USB_QUIRK_NO_LPM quirk for sony xperia xz1 smartphoneMathias Nyman
The fastboot tool for communicating with Android bootloaders does not work reliably with this device if USB 2 Link Power Management (LPM) is enabled. Various fastboot commands are affected, including the following, which usually reproduces the problem within two tries: fastboot getvar kernel getvar:kernel FAILED (remote: 'GetVar Variable Not found') This issue was hidden on many systems up until commit 63a1f8454962 ("xhci: stored cached port capability values in one place") as the xhci driver failed to detect USB 2 LPM support if USB 3 ports were listed before USB 2 ports in the "supported protocol capabilities". Adding the quirk resolves the issue. No drawbacks are expected since the device uses different USB product IDs outside of fastboot mode, and since fastboot commands worked before, until LPM was enabled on the tested system by the aforementioned commit. Based on a patch from Forest <forestix@nom.one> from which most of the code and commit message is taken. Cc: stable <stable@kernel.org> Reported-by: Forest <forestix@nom.one> Closes: https://lore.kernel.org/hk8umj9lv4l4qguftdq1luqtdrpa1gks5l@sonic.net Tested-by: Forest <forestix@nom.one> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20250206151836.51742-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14USB: cdc-acm: Fill in Renesas R-Car D3 USB Download mode quirkMarek Vasut
Add Renesas R-Car D3 USB Download mode quirk and update comments on all the other Renesas R-Car USB Download mode quirks to discern them from each other. This follows R-Car Series, 3rd Generation reference manual Rev.2.00 chapter 19.2.8 USB download mode . Fixes: 6d853c9e4104 ("usb: cdc-acm: Add DISABLE_ECHO for Renesas USB Download mode") Cc: stable <stable@kernel.org> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20250209145708.106914-1-marek.vasut+renesas@mailbox.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14usb: cdc-acm: Fix handling of oversized fragmentsJann Horn
If we receive an initial fragment of size 8 bytes which specifies a wLength of 1 byte (so the reassembled message is supposed to be 9 bytes long), and we then receive a second fragment of size 9 bytes (which is not supposed to happen), we currently wrongly bypass the fragment reassembly code but still pass the pointer to the acm->notification_buffer to acm_process_notification(). Make this less wrong by always going through fragment reassembly when we expect more fragments. Before this patch, receiving an overlong fragment could lead to `newctrl` in acm_process_notification() being uninitialized data (instead of data coming from the device). Cc: stable <stable@kernel.org> Fixes: ea2583529cd1 ("cdc-acm: reassemble fragmented notifications") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14usb: cdc-acm: Check control transfer buffer size before accessJann Horn
If the first fragment is shorter than struct usb_cdc_notification, we can't calculate an expected_size. Log an error and discard the notification instead of reading lengths from memory outside the received data, which can lead to memory corruption when the expected_size decreases between fragments, causing `expected_size - acm->nb_index` to wrap. This issue has been present since the beginning of git history; however, it only leads to memory corruption since commit ea2583529cd1 ("cdc-acm: reassemble fragmented notifications"). A mitigating factor is that acm_ctrl_irq() can only execute after userspace has opened /dev/ttyACM*; but if ModemManager is running, ModemManager will do that automatically depending on the USB device's vendor/product IDs and its other interfaces. Cc: stable <stable@kernel.org> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14usb: xhci: Restore xhci_pci support for Renesas HCsMichal Pecio
Some Renesas HCs require firmware upload to work, this is handled by the xhci_pci_renesas driver. Other variants of those chips load firmware from a SPI flash and are ready to work with xhci_pci alone. A refactor merged in v6.12 broke the latter configuration so that users are finding their hardware ignored by the normal driver and are forced to enable the firmware loader which isn't really necessary on their systems. Let xhci_pci work with those chips as before when the firmware loader is disabled by kernel configuration. Fixes: 25f51b76f90f ("xhci-pci: Make xhci-pci-renesas a proper modular driver") Cc: stable <stable@kernel.org> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219616 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219726 Signed-off-by: Michal Pecio <michal.pecio@gmail.com> Tested-by: Nicolai Buchwitz <nb@tipi-net.de> Link: https://lore.kernel.org/r/20250128104529.58a79bfc@foxbook Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14USB: pci-quirks: Fix HCCPARAMS register error for LS7A EHCIHuacai Chen
LS7A EHCI controller doesn't have extended capabilities, so the EECP (EHCI Extended Capabilities Pointer) field of HCCPARAMS register should be 0x0, but it reads as 0xa0 now. This is a hardware flaw and will be fixed in future, now just clear the EECP field to avoid error messages on boot: ...... [ 0.581675] pci 0000:00:04.1: EHCI: unrecognized capability ff [ 0.581699] pci 0000:00:04.1: EHCI: unrecognized capability ff [ 0.581716] pci 0000:00:04.1: EHCI: unrecognized capability ff [ 0.581851] pci 0000:00:04.1: EHCI: unrecognized capability ff ...... [ 0.581916] pci 0000:00:05.1: EHCI: unrecognized capability ff [ 0.581951] pci 0000:00:05.1: EHCI: unrecognized capability ff [ 0.582704] pci 0000:00:05.1: EHCI: unrecognized capability ff [ 0.582799] pci 0000:00:05.1: EHCI: unrecognized capability ff ...... Cc: stable <stable@kernel.org> Signed-off-by: Baoqi Zhang <zhangbaoqi@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Link: https://lore.kernel.org/r/20250202124935.480500-1-chenhuacai@loongson.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14iommu/vt-d: Make intel_iommu_drain_pasid_prq() cover faults for RIDLu Baolu
This driver supports page faults on PCI RID since commit <9f831c16c69e> ("iommu/vt-d: Remove the pasid present check in prq_event_thread") by allowing the reporting of page faults with the pasid_present field cleared to the upper layer for further handling. The fundamental assumption here is that the detach or replace operations act as a fence for page faults. This implies that all pending page faults associated with a specific RID or PASID are flushed when a domain is detached or replaced from a device RID or PASID. However, the intel_iommu_drain_pasid_prq() helper does not correctly handle faults for RID. This leads to faults potentially remaining pending in the iommu hardware queue even after the domain is detached, thereby violating the aforementioned assumption. Fix this issue by extending intel_iommu_drain_pasid_prq() to cover faults for RID. Fixes: 9f831c16c69e ("iommu/vt-d: Remove the pasid present check in prq_event_thread") Cc: stable@vger.kernel.org Suggested-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20250121023150.815972-1-baolu.lu@linux.intel.com Reviewed-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20250211005512.985563-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2025-02-14iommu/exynos: Fix typosAndrew Kreimer
There are some typos in comments/messages: - modyfying -> modifying - Unabled -> Unable Fix them via codespell. Signed-off-by: Andrew Kreimer <algonell@gmail.com> Link: https://lore.kernel.org/r/20250210112027.29791-1-algonell@gmail.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2025-02-14iommu: Fix a spelling errorEaswar Hariharan
Fix spelling error IDENITY -> IDENTITY in drivers/iommu/iommu.c. Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20250128190522.70800-1-eahariha@linux.microsoft.com [ joro: Add commit message ] Signed-off-by: Joerg Roedel <jroedel@suse.de>
2025-02-14iommu/amd: Expicitly enable CNTRL.EPHEn bit in resume pathVasant Hegde
With recent kernel, AMDGPU failed to resume after suspend on certain laptop. Sample log: ----------- Nov 14 11:52:19 Thinkbook kernel: iommu ivhd0: AMD-Vi: Event logged [ILLEGAL_DEV_TABLE_ENTRY device=0000:06:00.0 pasid=0x00000 address=0x135300000 flags=0x0080] Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[0]: 7d90000000000003 Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[1]: 0000100103fc0009 Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[2]: 2000000117840013 Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[3]: 0000000000000000 This is because in resume path, CNTRL[EPHEn] is not set. Fix this by setting CNTRL[EPHEn] to 1 in resume path if EFR[EPHSUP] is set. Note May be better approach is to save the control register in suspend path and restore it in resume path instead of trying to set indivisual bits. We will have separate patch for that. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219499 Fixes: c4cb23111103 ("iommu/amd: Add support for enable/disable IOPF") Tested-by: Hamish McIntyre-Bhatty <kernel-bugzilla@regd.hamishmb.com> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Link: https://lore.kernel.org/r/20250127094411.5931-1-vasant.hegde@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2025-02-14ALSA: hda: Add error check for snd_ctl_rename_id() in ↵Wentao Liang
snd_hda_create_dig_out_ctls() Check the return value of snd_ctl_rename_id() in snd_hda_create_dig_out_ctls(). Ensure that failures are properly handled. [ Note: the error cannot happen practically because the only error condition in snd_ctl_rename_id() is the missing ID, but this is a rename, hence it must be present. But for the code consistency, it's safer to have always the proper return check -- tiwai ] Fixes: 5c219a340850 ("ALSA: hda: Fix kctl->id initialization") Cc: stable@vger.kernel.org # 6.4+ Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Link: https://patch.msgid.link/20250213074543.1620-1-vulab@iscas.ac.cn Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-02-14ALSA: hda/tas2781: Fix index issue in tas2781 hda SPI driverBaojun Xu
Correct wrong mask for device index. Signed-off-by: Baojun Xu <baojun.xu@ti.com> Fixes: bb5f86ea50ff ("ALSA: hda/tas2781: Add tas2781 hda SPI driver") Link: https://patch.msgid.link/20250214013021.6072-1-baojun.xu@ti.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-02-14Merge tag 'asoc-fix-v6.14-rc2' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.14 More fixes and deviec quirks, most of them driver specific including a few SOF robustness fixes. Nothing super remarkable individually.
2025-02-13Merge tag 'drm-fixes-2025-02-14' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Weekly drm fixes pull request, nothing too unusual, the hdmi tests needs a bit of refactoring after lockdep shouted at them, otherwise amdgpu and xe lead and a few misc otherwise. amdgpu: - Fix shutdown regression on old APUs - Fix compute queue hang on gfx9 APUs - Fix possible invalid access in PSP failure path - Avoid possible buffer overflow in pptable override amdkfd: - Properly free gang bo in failure path - GFX12 trap handler fix i915: - selftest fix: avoid using uninitialized context xe: - Remove bo->clients out of bos_lock area - Carve out wopcm portion from the stolen memory tests: - fix lockdep with hdmi infrastructure tests host1x: - fix uninitialised mutex usage panthor: - fix uninit variable hibmc: - fix missing Kconfig select" * tag 'drm-fixes-2025-02-14' of https://gitlab.freedesktop.org/drm/kernel: drm: Fix DSC BPP increment decoding drm/amdgpu: avoid buffer overflow attach in smu_sys_set_pp_table() drm/amdkfd: Ensure consistent barrier state saved in gfx12 trap handler drm/amdgpu: bail out when failed to load fw in psp_init_cap_microcode() amdkfd: properly free gang_ctx_bo when failed to init user queue drm/amdgpu: bump version for RV/PCO compute fix drm/amdgpu/gfx9: manually control gfxoff for CS on RV drm/amdgpu/pm: fix UVD handing in amdgpu_dpm_set_powergating_by_smu() drm/xe: Carve out wopcm portion from the stolen memory drm/i915/selftests: avoid using uninitialized context drm/xe/client: bo->client does not need bos_lock drm/hisilicon/hibmc: select CONFIG_DRM_DISPLAY_DP_HELPER drm/panthor: avoid garbage value in panthor_ioctl_dev_query() gpu: host1x: Fix a use of uninitialized mutex drm/tests: hdmi: Fix recursive locking drm/tests: hdmi: Reorder DRM entities variables assignment drm/tests: hdmi: Remove redundant assignments drm/tests: hdmi: Fix WW_MUTEX_SLOWPATH failures
2025-02-14Merge tag 'drm-xe-fixes-2025-02-13' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes - Remove bo->clients out of bos_lock area (Tejas) - Carve out wopcm portion from the stolen memory (Nirmoy) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Z64rCicgpBe_t5GY@intel.com
2025-02-14Merge tag 'drm-intel-fixes-2025-02-13' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes - Selftest fix: avoid using uninitialized context Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Z64qg13R_72iN3_X@intel.com
2025-02-14Merge tag 'amd-drm-fixes-6.14-2025-02-13' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.14-2025-02-13: amdgpu: - Fix shutdown regression on old APUs - Fix compute queue hang on gfx9 APUs - Fix possible invalid access in PSP failure path - Avoid possible buffer overflow in pptable override amdkfd: - Properly free gang bo in failure path - GFX12 trap handler fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250213153843.242640-1-alexander.deucher@amd.com
2025-02-14Merge tag 'drm-misc-fixes-2025-02-13' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes Some locking fixes for the HDMI infrastructure tests, an unitialized mutex fix for host1x, an unitialized variable fix for panthor, and a config selection fix for hibmc. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250213-brilliant-terrier-from-hell-d06dd5@houat
2025-02-13MAINTAINERS: Add maintainer for Qualcomm's I2C GENI driverMukesh Kumar Savaliya
Add a new entry for the I2C QCOM GENI driver to the MAINTAINERS file. This entry includes the maintainer's name and contact information, ensuring proper maintainership and communication for the i2c-qcom-geni driver file. Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com> Link: https://lore.kernel.org/r/20250123084147.3632023-1-quic_msavaliy@quicinc.com Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2025-02-13MAINTAINERS: delete entry for AXXIA I2CWolfram Sang
The maintainer's email address bounced and he wasn't active for 4 years. Delete this entry and fall back to the generic I2C host drivers entry. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20250213162950.45596-2-wsa+renesas@sang-engineering.com Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2025-02-13Merge tag 'spi-fix-v6.14-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A small collection of driver specific fixes, none standing out in particular" * tag 'spi-fix-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: sn-f-ospi: Fix division by zero spi: pxa2xx: Fix regression when toggling chip select on LPSS devices spi: atmel-quadspi: Fix warning in doc-comment
2025-02-13Merge tag 'regulator-fix-v6.14-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "The main change here is a revert for a cleanup that was done in the core, attempting to resolve some confusion about how we handle systems where we've somehow managed to end up with both platform data and device tree data for the same device. Unfortunately it turns out there are actually a few systems that deliberately do this and were broken by the change so we've just reverted it. There's also a new Qualcomm device ID" * tag 'regulator-fix-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: core: let dt properties override driver init_data regulator: qcom_smd: Add l2, l5 sub-node to mp5496 regulator
2025-02-13Merge tag 'regmap-fix-v6.14-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fix from Mark Brown: "A simple fix for memory leaks when deallocating regmap-irq controllers" * tag 'regmap-fix-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap-irq: Add missing kfree()
2025-02-13Merge tag 'net-6.14-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, wireless and bluetooth. Kalle Valo steps down after serving as the WiFi driver maintainer for over a decade. Current release - fix to a fix: - vsock: orphan socket after transport release, avoid null-deref - Bluetooth: L2CAP: fix corrupted list in hci_chan_del Current release - regressions: - eth: - stmmac: correct Rx buffer layout when SPH is enabled - iavf: fix a locking bug in an error path - rxrpc: fix alteration of headers whilst zerocopy pending - s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH - Revert "netfilter: flowtable: teardown flow if cached mtu is stale" Current release - new code bugs: - rxrpc: fix ipv6 path MTU discovery, only ipv4 worked - pse-pd: fix deadlock in current limit functions Previous releases - regressions: - rtnetlink: fix netns refleak with rtnl_setlink() - wifi: brcmfmac: use random seed flag for BCM4355 and BCM4364 firmware Previous releases - always broken: - add missing RCU protection of struct net throughout the stack - can: rockchip: bail out if skb cannot be allocated - eth: ti: am65-cpsw: base XDP support fixes Misc: - ethtool: tsconfig: update the format of hwtstamp flags, changes the uAPI but this uAPI was not in any release yet" * tag 'net-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits) net: pse-pd: Fix deadlock in current limit functions rxrpc: Fix ipv6 path MTU discovery Reapply "net: skb: introduce and use a single page frag cache" s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH mlxsw: Add return value check for mlxsw_sp_port_get_stats_raw() ipv6: mcast: add RCU protection to mld_newpack() team: better TEAM_OPTION_TYPE_STRING validation Bluetooth: L2CAP: Fix corrupted list in hci_chan_del Bluetooth: btintel_pcie: Fix a potential race condition Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd net: ethernet: ti: am65_cpsw: fix tx_cleanup for XDP case net: ethernet: ti: am65-cpsw: fix RX & TX statistics for XDP_TX case net: ethernet: ti: am65-cpsw: fix memleak in certain XDP cases vsock/test: Add test for SO_LINGER null ptr deref vsock: Orphan socket after transport release MAINTAINERS: Add sctp headers to the general netdev entry Revert "netfilter: flowtable: teardown flow if cached mtu is stale" iavf: Fix a locking bug in an error path rxrpc: Fix alteration of headers whilst zerocopy pending net: phylink: make configuring clock-stop dependent on MAC support ...
2025-02-13Merge tag 'for-6.14-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - fix stale page cache after race between readahead and direct IO write - fix hole expansion when writing at an offset beyond EOF, the range will not be zeroed - use proper way to calculate offsets in folio ranges * tag 'for-6.14-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix hole expansion when writing at an offset beyond EOF btrfs: fix stale page cache after race between readahead and direct IO write btrfs: fix two misuses of folio_shift()
2025-02-13Merge tag 'bcachefs-2025-02-12' of git://evilpiepirate.org/bcachefsLinus Torvalds
Pull bcachefs fixes from Kent Overstreet: "Just small stuff. As a general announcement, on disk format is now frozen in my master branch - future on disk format changes will be optional, not required. - More fixes for going read-only: the previous fix was insufficient, but with more work on ordering journal reclaim flushing (and a btree node accounting fix so we don't split until we have to) the tiering_replication test now consistently goes read-only in less than a second. - fix for fsck when we have reflink pointers to missing indirect extents - some transaction restart handling fixes from Alan; the "Pass _orig_restart_count to trans_was_restarted" likely fixes some rare undefined behaviour heisenbugs" * tag 'bcachefs-2025-02-12' of git://evilpiepirate.org/bcachefs: bcachefs: Reuse transaction bcachefs: Pass _orig_restart_count to trans_was_restarted bcachefs: CONFIG_BCACHEFS_INJECT_TRANSACTION_RESTARTS bcachefs: Fix want_new_bset() so we write until the end of the btree node bcachefs: Split out journal pins by btree level bcachefs: Fix use after free bcachefs: Fix marking reflink pointers to missing indirect extents
2025-02-13KVM: arm64: vgic: Hoist SGI/PPI alloc from vgic_init() to kvm_create_vgic()Marc Zyngier
If userspace creates vcpus, then a vgic, we end-up in a situation where irqchip_in_kernel() will return true, but no private interrupt has been allocated for these vcpus. This situation will continue until userspace initialises the vgic, at which point we fix the early vcpus. Should a vcpu run or be initialised in the interval, bad things may happen. An obvious solution is to move this fix-up phase to the point where the vgic is created. This ensures that from that point onwards, all vcpus have their private interrupts, as new vcpus will directly allocate them. With that, we have the invariant that when irqchip_in_kernel() is true, all vcpus have their private interrupts. Reported-by: Alexander Potapenko <glider@google.com> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250212182558.2865232-3-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-02-13KVM: arm64: timer: Drop warning on failed interrupt signallingMarc Zyngier
We currently spit out a warning if making a timer interrupt pending fails. But not only this is loud and easy to trigger from userspace, we also fail to do anything useful with that information. Dropping the warning is the easiest thing to do for now. We can always add error reporting if we really want in the future. Reported-by: Alexander Potapenko <glider@google.com> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250212182558.2865232-2-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-02-13net: pse-pd: Fix deadlock in current limit functionsKory Maincent
Fix a deadlock in pse_pi_get_current_limit and pse_pi_set_current_limit caused by consecutive mutex_lock calls. One in the function itself and another in pse_pi_get_voltage. Resolve the issue by using the unlocked version of pse_pi_get_voltage instead. Fixes: e0a5e2bba38a ("net: pse-pd: Use power limit at driver side instead of current limit") Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20250212151751.1515008-1-kory.maincent@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-13rxrpc: Fix ipv6 path MTU discoveryDavid Howells
rxrpc path MTU discovery currently only makes use of ICMPv4, but not ICMPv6, which means that pmtud for IPv6 doesn't work correctly. Fix it to check for ICMPv6 messages also. Fixes: eeaedc5449d9 ("rxrpc: Implement path-MTU probing using padded PING ACKs (RFC8899)") Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Simon Horman <horms@kernel.org> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/3517283.1739359284@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-13KVM: arm64: Fix alignment of kvm_hyp_memcache allocationsQuentin Perret
When allocating guest stage-2 page-table pages at EL2, pKVM can consume pages from the host-provided kvm_hyp_memcache. As pgtable.c expects zeroed pages, guest_s2_zalloc_page() actively implements this zeroing with a PAGE_SIZE memset. Unfortunately, we don't check the page alignment of the host-provided address before doing so, which could lead to the memset overrunning the page if the host was malicious. Fix this by simply force-aligning all kvm_hyp_memcache allocations to page boundaries. Fixes: 60dfe093ec13 ("KVM: arm64: Instantiate guest stage-2 page-tables at EL2") Reported-by: Ben Simner <ben.simner@cl.cam.ac.uk> Signed-off-by: Quentin Perret <qperret@google.com> Link: https://lore.kernel.org/r/20250213153615.3642515-1-qperret@google.com Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-02-13KVM: arm64: Convert timer offset VA when accessed in HYP codeMarc Zyngier
Now that EL2 has gained some early timer emulation, it accesses the offsets pointed to by the timer structure, both of which live in the KVM structure. Of course, these are *kernel* pointers, so the dereferencing of these pointers in non-kernel code must be itself be offset. Given switch.h its own version of timer_get_offset() and use that instead. Fixes: b86fc215dc26d ("KVM: arm64: Handle counter access early in non-HYP context") Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Tested-by: Anders Roxell <anders.roxell@linaro.org> Link: https://lore.kernel.org/r/20250212173454.2864462-1-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-02-13KVM: arm64: Simplify warning in kvm_arch_vcpu_load_fp()Mark Rutland
At the end of kvm_arch_vcpu_load_fp() we check that no bits are set in SVCR. We only check this for protected mode despite this mattering equally for non-protected mode, and the comment above this is confusing. Remove the comment and simplify the check, moving from WARN_ON() to WARN_ON_ONCE() to avoid spamming the log. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-02-13KVM: arm64: Eagerly switch ZCR_EL{1,2}Mark Rutland
In non-protected KVM modes, while the guest FPSIMD/SVE/SME state is live on the CPU, the host's active SVE VL may differ from the guest's maximum SVE VL: * For VHE hosts, when a VM uses NV, ZCR_EL2 contains a value constrained by the guest hypervisor, which may be less than or equal to that guest's maximum VL. Note: in this case the value of ZCR_EL1 is immaterial due to E2H. * For nVHE/hVHE hosts, ZCR_EL1 contains a value written by the guest, which may be less than or greater than the guest's maximum VL. Note: in this case hyp code traps host SVE usage and lazily restores ZCR_EL2 to the host's maximum VL, which may be greater than the guest's maximum VL. This can be the case between exiting a guest and kvm_arch_vcpu_put_fp(). If a softirq is taken during this period and the softirq handler tries to use kernel-mode NEON, then the kernel will fail to save the guest's FPSIMD/SVE state, and will pend a SIGKILL for the current thread. This happens because kvm_arch_vcpu_ctxsync_fp() binds the guest's live FPSIMD/SVE state with the guest's maximum SVE VL, and fpsimd_save_user_state() verifies that the live SVE VL is as expected before attempting to save the register state: | if (WARN_ON(sve_get_vl() != vl)) { | force_signal_inject(SIGKILL, SI_KERNEL, 0, 0); | return; | } Fix this and make this a bit easier to reason about by always eagerly switching ZCR_EL{1,2} at hyp during guest<->host transitions. With this happening, there's no need to trap host SVE usage, and the nVHE/nVHE __deactivate_cptr_traps() logic can be simplified to enable host access to all present FPSIMD/SVE/SME features. In protected nVHE/hVHE modes, the host's state is always saved/restored by hyp, and the guest's state is saved prior to exit to the host, so from the host's PoV the guest never has live FPSIMD/SVE/SME state, and the host's ZCR_EL1 is never clobbered by hyp. Fixes: 8c8010d69c132273 ("KVM: arm64: Save/restore SVE state for nVHE") Fixes: 2e3cf82063a00ea0 ("KVM: arm64: nv: Ensure correct VL is loaded before saving SVE state") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Will Deacon <will@kernel.org> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250210195226.1215254-9-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-02-13KVM: arm64: Mark some header functions as inlineMark Rutland
The shared hyp switch header has a number of static functions which might not be used by all files that include the header, and when unused they will provoke compiler warnings, e.g. | In file included from arch/arm64/kvm/hyp/nvhe/hyp-main.c:8: | ./arch/arm64/kvm/hyp/include/hyp/switch.h:703:13: warning: 'kvm_hyp_handle_dabt_low' defined but not used [-Wunused-function] | 703 | static bool kvm_hyp_handle_dabt_low(struct kvm_vcpu *vcpu, u64 *exit_code) | | ^~~~~~~~~~~~~~~~~~~~~~~ | ./arch/arm64/kvm/hyp/include/hyp/switch.h:682:13: warning: 'kvm_hyp_handle_cp15_32' defined but not used [-Wunused-function] | 682 | static bool kvm_hyp_handle_cp15_32(struct kvm_vcpu *vcpu, u64 *exit_code) | | ^~~~~~~~~~~~~~~~~~~~~~ | ./arch/arm64/kvm/hyp/include/hyp/switch.h:662:13: warning: 'kvm_hyp_handle_sysreg' defined but not used [-Wunused-function] | 662 | static bool kvm_hyp_handle_sysreg(struct kvm_vcpu *vcpu, u64 *exit_code) | | ^~~~~~~~~~~~~~~~~~~~~ | ./arch/arm64/kvm/hyp/include/hyp/switch.h:458:13: warning: 'kvm_hyp_handle_fpsimd' defined but not used [-Wunused-function] | 458 | static bool kvm_hyp_handle_fpsimd(struct kvm_vcpu *vcpu, u64 *exit_code) | | ^~~~~~~~~~~~~~~~~~~~~ | ./arch/arm64/kvm/hyp/include/hyp/switch.h:329:13: warning: 'kvm_hyp_handle_mops' defined but not used [-Wunused-function] | 329 | static bool kvm_hyp_handle_mops(struct kvm_vcpu *vcpu, u64 *exit_code) | | ^~~~~~~~~~~~~~~~~~~ Mark these functions as 'inline' to suppress this warning. This shouldn't result in any functional change. At the same time, avoid the use of __alias() in the header and alias kvm_hyp_handle_iabt_low() and kvm_hyp_handle_watchpt_low() to kvm_hyp_handle_memory_fault() using CPP, matching the style in the rest of the kernel. For consistency, kvm_hyp_handle_memory_fault() is also marked as 'inline'. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Acked-by: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250210195226.1215254-8-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-02-13KVM: arm64: Refactor exit handlersMark Rutland
The hyp exit handling logic is largely shared between VHE and nVHE/hVHE, with common logic in arch/arm64/kvm/hyp/include/hyp/switch.h. The code in the header depends on function definitions provided by arch/arm64/kvm/hyp/vhe/switch.c and arch/arm64/kvm/hyp/nvhe/switch.c when they include the header. This is an unusual header dependency, and prevents the use of arch/arm64/kvm/hyp/include/hyp/switch.h in other files as this would result in compiler warnings regarding missing definitions, e.g. | In file included from arch/arm64/kvm/hyp/nvhe/hyp-main.c:8: | ./arch/arm64/kvm/hyp/include/hyp/switch.h:733:31: warning: 'kvm_get_exit_handler_array' used but never defined | 733 | static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm_vcpu *vcpu); | | ^~~~~~~~~~~~~~~~~~~~~~~~~~ | ./arch/arm64/kvm/hyp/include/hyp/switch.h:735:13: warning: 'early_exit_filter' used but never defined | 735 | static void early_exit_filter(struct kvm_vcpu *vcpu, u64 *exit_code); | | ^~~~~~~~~~~~~~~~~ Refactor the logic such that the header doesn't depend on anything from the C files. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Acked-by: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250210195226.1215254-7-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-02-13KVM: arm64: Refactor CPTR trap deactivationMark Rutland
For historical reasons, the VHE and nVHE/hVHE implementations of __activate_cptr_traps() pair with a common implementation of __kvm_reset_cptr_el2(), which ideally would be named __deactivate_cptr_traps(). Rename __kvm_reset_cptr_el2() to __deactivate_cptr_traps(), and split it into separate VHE and nVHE/hVHE variants so that each can be paired with its corresponding implementation of __activate_cptr_traps(). At the same time, fold kvm_write_cptr_el2() into its callers. This makes it clear in-context whether a write is made to the CPACR_EL1 encoding or the CPTR_EL2 encoding, and removes the possibility of confusion as to whether kvm_write_cptr_el2() reformats the sysreg fields as cpacr_clear_set() does. In the nVHE/hVHE implementation of __activate_cptr_traps(), placing the sysreg writes within the if-else blocks requires that the call to __activate_traps_fpsimd32() is moved earlier, but as this was always called before writing to CPTR_EL2/CPACR_EL1, this should not result in a functional change. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Acked-by: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250210195226.1215254-6-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-02-13KVM: arm64: Remove VHE host restore of CPACR_EL1.SMENMark Rutland
When KVM is in VHE mode, the host kernel tries to save and restore the configuration of CPACR_EL1.SMEN (i.e. CPTR_EL2.SMEN when HCR_EL2.E2H=1) across kvm_arch_vcpu_load_fp() and kvm_arch_vcpu_put_fp(), since the configuration may be clobbered by hyp when running a vCPU. This logic has historically been broken, and is currently redundant. This logic was originally introduced in commit: 861262ab86270206 ("KVM: arm64: Handle SME host state when running guests") At the time, the VHE hyp code would reset CPTR_EL2.SMEN to 0b00 when returning to the host, trapping host access to SME state. Unfortunately, this was unsafe as the host could take a softirq before calling kvm_arch_vcpu_put_fp(), and if a softirq handler were to use kernel mode NEON the resulting attempt to save the live FPSIMD/SVE/SME state would result in a fatal trap. That issue was limited to VHE mode. For nVHE/hVHE modes, KVM always saved/restored the host kernel's CPACR_EL1 value, and configured CPTR_EL2.TSM to 0b0, ensuring that host usage of SME would not be trapped. The issue above was incidentally fixed by commit: 375110ab51dec5dc ("KVM: arm64: Fix resetting SME trap values on reset for (h)VHE") That commit changed the VHE hyp code to configure CPTR_EL2.SMEN to 0b01 when returning to the host, permitting host kernel usage of SME, avoiding the issue described above. At the time, this was not identified as a fix for commit 861262ab86270206. Now that the host eagerly saves and unbinds its own FPSIMD/SVE/SME state, there's no need to save/restore the state of the EL0 SME trap. The kernel can safely save/restore state without trapping, as described above, and will restore userspace state (including trap controls) before returning to userspace. Remove the redundant logic. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Acked-by: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250210195226.1215254-5-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-02-13KVM: arm64: Remove VHE host restore of CPACR_EL1.ZENMark Rutland
When KVM is in VHE mode, the host kernel tries to save and restore the configuration of CPACR_EL1.ZEN (i.e. CPTR_EL2.ZEN when HCR_EL2.E2H=1) across kvm_arch_vcpu_load_fp() and kvm_arch_vcpu_put_fp(), since the configuration may be clobbered by hyp when running a vCPU. This logic is currently redundant. The VHE hyp code unconditionally configures CPTR_EL2.ZEN to 0b01 when returning to the host, permitting host kernel usage of SVE. Now that the host eagerly saves and unbinds its own FPSIMD/SVE/SME state, there's no need to save/restore the state of the EL0 SVE trap. The kernel can safely save/restore state without trapping, as described above, and will restore userspace state (including trap controls) before returning to userspace. Remove the redundant logic. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Acked-by: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250210195226.1215254-4-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-02-13KVM: arm64: Remove host FPSIMD saving for non-protected KVMMark Rutland
Now that the host eagerly saves its own FPSIMD/SVE/SME state, non-protected KVM never needs to save the host FPSIMD/SVE/SME state, and the code to do this is never used. Protected KVM still needs to save/restore the host FPSIMD/SVE state to avoid leaking guest state to the host (and to avoid revealing to the host whether the guest used FPSIMD/SVE/SME), and that code needs to be retained. Remove the unused code and data structures. To avoid the need for a stub copy of kvm_hyp_save_fpsimd_host() in the VHE hyp code, the nVHE/hVHE version is moved into the shared switch header, where it is only invoked when KVM is in protected mode. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Acked-by: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250210195226.1215254-3-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-02-13KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME stateMark Rutland
There are several problems with the way hyp code lazily saves the host's FPSIMD/SVE state, including: * Host SVE being discarded unexpectedly due to inconsistent configuration of TIF_SVE and CPACR_ELx.ZEN. This has been seen to result in QEMU crashes where SVE is used by memmove(), as reported by Eric Auger: https://issues.redhat.com/browse/RHEL-68997 * Host SVE state is discarded *after* modification by ptrace, which was an unintentional ptrace ABI change introduced with lazy discarding of SVE state. * The host FPMR value can be discarded when running a non-protected VM, where FPMR support is not exposed to a VM, and that VM uses FPSIMD/SVE. In these cases the hyp code does not save the host's FPMR before unbinding the host's FPSIMD/SVE/SME state, leaving a stale value in memory. Avoid these by eagerly saving and "flushing" the host's FPSIMD/SVE/SME state when loading a vCPU such that KVM does not need to save any of the host's FPSIMD/SVE/SME state. For clarity, fpsimd_kvm_prepare() is removed and the necessary call to fpsimd_save_and_flush_cpu_state() is placed in kvm_arch_vcpu_load_fp(). As 'fpsimd_state' and 'fpmr_ptr' should not be used, they are set to NULL; all uses of these will be removed in subsequent patches. Historical problems go back at least as far as v5.17, e.g. erroneous assumptions about TIF_SVE being clear in commit: 8383741ab2e773a9 ("KVM: arm64: Get rid of host SVE tracking/saving") ... and so this eager save+flush probably needs to be backported to ALL stable trees. Fixes: 93ae6b01bafee8fa ("KVM: arm64: Discard any SVE state when entering KVM guests") Fixes: 8c845e2731041f0f ("arm64/sve: Leave SVE enabled on syscall if we don't context switch") Fixes: ef3be86021c3bdf3 ("KVM: arm64: Add save/restore support for FPMR") Reported-by: Eric Auger <eauger@redhat.com> Reported-by: Wilco Dijkstra <wilco.dijkstra@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Tested-by: Eric Auger <eric.auger@redhat.com> Acked-by: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Fuad Tabba <tabba@google.com> Cc: Jeremy Linton <jeremy.linton@arm.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250210195226.1215254-2-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-02-13gpiolib: Fix crash on error in gpiochip_get_ngpios()Andy Shevchenko
The gpiochip_get_ngpios() uses chip_*() macros to print messages. However these macros rely on gpiodev to be initialised and set, which is not the case when called via bgpio_init(). In such a case the printing messages will crash on NULL pointer dereference. Replace chip_*() macros by the respective dev_*() ones to avoid such crash. Fixes: 55b2395e4e92 ("gpio: mmio: handle "ngpios" properly in bgpio_init()") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250213155646.2882324-1-andriy.shevchenko@linux.intel.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-02-13Merge tag 'for-net-2025-02-13' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - btintel_pcie: Fix a potential race condition - L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd - L2CAP: Fix corrupted list in hci_chan_del * tag 'for-net-2025-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: L2CAP: Fix corrupted list in hci_chan_del Bluetooth: btintel_pcie: Fix a potential race condition Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd ==================== Link: https://patch.msgid.link/20250213162446.617632-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-13Merge tag 'nf-25-02-13' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following batch contains one revert for: 1) Revert flowtable entry teardown cycle when skbuff exceeds mtu to deal with DF flag unset scenarios. This is reverts a patch coming in the previous merge window (available in 6.14-rc releases). * tag 'nf-25-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: Revert "netfilter: flowtable: teardown flow if cached mtu is stale" ==================== Link: https://patch.msgid.link/20250213100502.3983-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-19 04:57:06 +0000