| Age | Commit message (Collapse) | Author |
|---|
|
The previous attempt at this had an issue with with num_clips > 1
because it would always end up using the coordinates of the last
clip while using width and height calculated from the bounding
box of all the clips.
So if the last clip happens to be not at the top-left corner of
the bounding box, the CPU blit operation would go out of bounds.
The original intent was to coalesce all the clips into one blit,
and to do that we need to also track the starting point of the
content buffer.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
|
|
When a new FB is bound, we have to send an update command otherwise
the new FB may not be shown
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
|
|
When vmw_gb_surface_define_ioctl() is called with an existing buffer,
we end up returning an uninitialized variable in the backup_handle.
The fix is to first initialize backup_handle to 0 just to be sure, and
second, when a user-provided buffer is found, we will use the
req->buffer_handle as the backup_handle.
Cc: <stable@vger.kernel.org>
Reported-by: Murray McAllister <murray.mcallister@insomniasec.com>
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
|
|
If vmalloc() fails then we need to a bit of cleanup before returning.
Cc: <stable@vger.kernel.org>
Fixes: fb1d9738ca05 ("drm/vmwgfx: Add DRM driver for VMware Virtual GPU")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
|
|
With atomic, the cursor surface is treated like a FB. Creating
a proxy surface for cursor doesn't gain us much benefit.
This fixes the issue on atomic enabled 2D VMs where the cursor
disappears.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
|
|
The 'req->mip_levels' parameter in vmw_gb_surface_define_ioctl() is
a user-controlled 'uint32_t' value which is used as a loop count limit.
This can lead to a kernel lockup and DoS. Add check for 'req->mip_levels'.
References:
https://bugzilla.redhat.com/show_bug.cgi?id=1437431
Cc: <stable@vger.kernel.org>
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
|
|
BXT has a H/W issue with IOMMU which can lead to system hangs when
Aperture accesses are queued within the GAM behind GTT Accesses.
This patch avoids the condition by wrapping all GTT updates in stop_machine
and using a flushing read prior to restarting the machine.
The stop_machine guarantees no new Aperture accesses can begin while
the PTE writes are being emmitted. The flushing read ensures that
any following Aperture accesses cannot begin until the PTE writes
have been cleared out of the GAM's fifo.
Only FOLLOWING Aperture accesses need to be separated from in flight
PTE updates. PTE Writes may follow tightly behind already in flight
Aperture accesses, so no flushing read is required at the start of
a PTE update sequence.
This issue was reproduced by running
igt/gem_readwrite and
igt/gem_render_copy
simultaneously from different processes, each in a tight loop,
with INTEL_IOMMU enabled.
This patch was originally published as:
drm/i915: Serialize GTT Updates on BXT
[Note: This will cause a performance penalty for some use cases, but
avoiding hangs trumps performance hits. This may need to be worked
around in Mesa to recover the lost performance.]
v2: Move bxt/iommu detection into static function
Remove #ifdef CONFIG_INTEL_IOMMU protection
Make function names more reflective of purpose
Move flushing read into static function
v3: Tidy up for checkpatch.pl
Testcase: igt/gem_concurrent_blit
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: John Harrison <john.C.Harrison@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Link: http://patchwork.freedesktop.org/patch/msgid/1495641251-30022-1-git-send-email-jon.bloomfield@intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 0ef34ad6222abfa513117515fec720c33a58f105)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Commit 5995a68 "xen/privcmd: Add support for Linux 64KB page granularity" did
not go far enough to support 64KB in mmap_batch_fn.
The variable 'nr' is the number of 4KB chunk to map. However, when Linux
is using 64KB page granularity the array of pages (vma->vm_private_data)
contain one page per 64KB. Fix it by incrementing st->index correctly.
Furthermore, st->va is not correctly incremented as PAGE_SIZE !=
XEN_PAGE_SIZE.
Fixes: 5995a68 ("xen/privcmd: Add support for Linux 64KB page granularity")
CC: stable@vger.kernel.org
Reported-by: Feng Kan <fkan@apm.com>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Christoph Hellwig suggests we should to make APST work out of the box.
Hence relax the the default max latency to make them able to enter
deepest power state on default.
Here are id-ctrl excerpts from two high latency NVMes:
vid : 0x14a4
ssvid : 0x1b4b
mn : CX2-GB1024-Q11 NVMe LITEON 1024GB
ps 3 : mp:0.1000W non-operational enlat:5000 exlat:5000 rrt:3 rrl:3
rwt:3 rwl:3 idle_power:- active_power:-
ps 4 : mp:0.0100W non-operational enlat:50000 exlat:100000 rrt:4 rrl:4
rwt:4 rwl:4 idle_power:- active_power:-
vid : 0x15b7
ssvid : 0x1b4b
mn : A400 NVMe SanDisk 512GB
ps 3 : mp:0.0500W non-operational enlat:51000 exlat:10000 rrt:0 rrl:0
rwt:0 rwl:0 idle_power:- active_power:-
ps 4 : mp:0.0055W non-operational enlat:1000000 exlat:100000 rrt:0 rrl:0
rwt:0 rwl:0 idle_power:- active_power:-
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When a NVMe is in non-op states, the latency is exlat.
The latency will be enlat + exlat only when the NVMe tries to transit
from operational state right atfer it begins to transit to
non-operational state, which should be a rare case.
Therefore, as Andy Lutomirski suggests, use exlat only when deciding power
states to trainsit to.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The failure case, of a create controller request, called
nvme_uninit_ctrl() but didn't do a put to allow the nvme
controller to be deleted.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Per FC-NVME, when lldd or transport detects an i/o error, the
connection must be terminated, which in turn requires the association
to be termianted. Currently the transport simply creates a nvme
completion status of transport error and returns the io. The FC-NVME
spec makes the mandate as initiator and host, depending on the error,
can get out of sync on outstanding io counts (sqhd/sqtail).
Implement the association teardown on lldd or transport detected
errors.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
|
|
When we encounter an transport/controller errors, error recovery
kicks in which performs:
1. stops io/admin queues
2. moves transport queues out of LIVE state
3. fast fail pending io
4. schedule periodic reconnects.
But we also need to fast fail incoming IO taht enters after we
already scheduled. Given that our queue is not LIVE anymore, simply
restart the request queues to fail in .queue_rq
Reported-by: Alex Turin <alex@vastdata.com>
Reported-by: shahar.salzman <shahar.salzman@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
|
|
Commit c5f6ce97c1210 tries to address multiple resets but fails as
work_busy doesn't involve any synchronization and can fail. This is
reproducible easily as can be seen by WARNING below which is triggered
with line:
WARN_ON(dev->ctrl.state == NVME_CTRL_RESETTING)
Allowing multiple resets can result in multiple controller removal as
well if different conditions inside nvme_reset_work fail and which
might deadlock on device_release_driver.
[ 480.327007] WARNING: CPU: 3 PID: 150 at drivers/nvme/host/pci.c:1900 nvme_reset_work+0x36c/0xec0
[ 480.327008] Modules linked in: rfcomm fuse nf_conntrack_netbios_ns nf_conntrack_broadcast...
[ 480.327044] btusb videobuf2_core ghash_clmulni_intel snd_hwdep cfg80211 acer_wmi hci_uart..
[ 480.327065] CPU: 3 PID: 150 Comm: kworker/u16:2 Not tainted 4.12.0-rc1+ #13
[ 480.327065] Hardware name: Acer Predator G9-591/Mustang_SLS, BIOS V1.10 03/03/2016
[ 480.327066] Workqueue: nvme nvme_reset_work
[ 480.327067] task: ffff880498ad8000 task.stack: ffffc90002218000
[ 480.327068] RIP: 0010:nvme_reset_work+0x36c/0xec0
[ 480.327069] RSP: 0018:ffffc9000221bdb8 EFLAGS: 00010246
[ 480.327070] RAX: 0000000000460000 RBX: ffff880498a98128 RCX: dead000000000200
[ 480.327070] RDX: 0000000000000001 RSI: ffff8804b1028020 RDI: ffff880498a98128
[ 480.327071] RBP: ffffc9000221be50 R08: 0000000000000000 R09: 0000000000000000
[ 480.327071] R10: ffffc90001963ce8 R11: 000000000000020d R12: ffff880498a98000
[ 480.327072] R13: ffff880498a53500 R14: ffff880498a98130 R15: ffff880498a98128
[ 480.327072] FS: 0000000000000000(0000) GS:ffff8804c1cc0000(0000) knlGS:0000000000000000
[ 480.327073] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 480.327074] CR2: 00007ffcf3c37f78 CR3: 0000000001e09000 CR4: 00000000003406e0
[ 480.327074] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 480.327075] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 480.327075] Call Trace:
[ 480.327079] ? __switch_to+0x227/0x400
[ 480.327081] process_one_work+0x18c/0x3a0
[ 480.327082] worker_thread+0x4e/0x3b0
[ 480.327084] kthread+0x109/0x140
[ 480.327085] ? process_one_work+0x3a0/0x3a0
[ 480.327087] ? kthread_park+0x60/0x60
[ 480.327102] ret_from_fork+0x2c/0x40
[ 480.327103] Code: e8 5a dc ff ff 85 c0 41 89 c1 0f.....
This patch addresses the problem by using state of controller to
decide whether reset should be queued or not as state change is
synchronizated using controller spinlock. Also cancel_work_sync is
used to make sure remove cancels the reset_work and waits for it to
finish. This patch also changes return value from -ENODEV to more
appropriate -EBUSY if nvme_reset fails to change state.
Fixes: c5f6ce97c1210 ("nvme: don't schedule multiple resets")
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We need to start admin queues too in nvme_kill_queues()
for avoiding hang in remove path[1].
This patch is very similar with 806f026f9b901eaf(nvme: use
blk_mq_start_hw_queues() in nvme_kill_queues()).
[1] hang stack trace
[<ffffffff813c9716>] blk_execute_rq+0x56/0x80
[<ffffffff815cb6e9>] __nvme_submit_sync_cmd+0x89/0xf0
[<ffffffff815ce7be>] nvme_set_features+0x5e/0x90
[<ffffffff815ce9f6>] nvme_configure_apst+0x166/0x200
[<ffffffff815cef45>] nvme_set_latency_tolerance+0x35/0x50
[<ffffffff8157bd11>] apply_constraint+0xb1/0xc0
[<ffffffff8157cbb4>] dev_pm_qos_constraints_destroy+0xf4/0x1f0
[<ffffffff8157b44a>] dpm_sysfs_remove+0x2a/0x60
[<ffffffff8156d951>] device_del+0x101/0x320
[<ffffffff8156db8a>] device_unregister+0x1a/0x60
[<ffffffff8156dc4c>] device_destroy+0x3c/0x50
[<ffffffff815cd295>] nvme_uninit_ctrl+0x45/0xa0
[<ffffffff815d4858>] nvme_remove+0x78/0x110
[<ffffffff81452b69>] pci_device_remove+0x39/0xb0
[<ffffffff81572935>] device_release_driver_internal+0x155/0x210
[<ffffffff81572a02>] device_release_driver+0x12/0x20
[<ffffffff815d36fb>] nvme_remove_dead_ctrl_work+0x6b/0x70
[<ffffffff810bf3bc>] process_one_work+0x18c/0x3a0
[<ffffffff810bf61e>] worker_thread+0x4e/0x3b0
[<ffffffff810c5ac9>] kthread+0x109/0x140
[<ffffffff8185800c>] ret_from_fork+0x2c/0x40
[<ffffffffffffffff>] 0xffffffffffffffff
Fixes: c5552fde102fc("nvme: Enable autonomous power state transitions")
Reported-by: Rakesh Pandit <rakesh@tuxera.com>
Tested-by: Rakesh Pandit <rakesh@tuxera.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
snd_timer_user_tselect() reallocates the queue buffer dynamically, but
it forgot to reset its indices. Since the read may happen
concurrently with ioctl and snd_timer_user_tselect() allocates the
buffer via kmalloc(), this may lead to the leak of uninitialized
kernel-space data, as spotted via KMSAN:
BUG: KMSAN: use of unitialized memory in snd_timer_user_read+0x6c4/0xa10
CPU: 0 PID: 1037 Comm: probe Not tainted 4.11.0-rc5+ #2739
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16
dump_stack+0x143/0x1b0 lib/dump_stack.c:52
kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:1007
kmsan_check_memory+0xc2/0x140 mm/kmsan/kmsan.c:1086
copy_to_user ./arch/x86/include/asm/uaccess.h:725
snd_timer_user_read+0x6c4/0xa10 sound/core/timer.c:2004
do_loop_readv_writev fs/read_write.c:716
__do_readv_writev+0x94c/0x1380 fs/read_write.c:864
do_readv_writev fs/read_write.c:894
vfs_readv fs/read_write.c:908
do_readv+0x52a/0x5d0 fs/read_write.c:934
SYSC_readv+0xb6/0xd0 fs/read_write.c:1021
SyS_readv+0x87/0xb0 fs/read_write.c:1018
This patch adds the missing reset of queue indices. Together with the
previous fix for the ioctl/read race, we cover the whole problem.
Reported-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The read from ALSA timer device, the function snd_timer_user_tread(),
may access to an uninitialized struct snd_timer_user fields when the
read is concurrently performed while the ioctl like
snd_timer_user_tselect() is invoked. We have already fixed the races
among ioctls via a mutex, but we seem to have forgotten the race
between read vs ioctl.
This patch simply applies (more exactly extends the already applied
range of) tu->ioctl_lock in snd_timer_user_tread() for closing the
race window.
Reported-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
As agreed with Ryan, change the maintainership.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Ryan Mallon <rmallon@gmail.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Revert commit eed4d47efe95 (ACPI / sleep: Ignore spurious SCI wakeups
from suspend-to-idle) as it turned out to be premature and triggered
a number of different issues on various systems.
That includes, but is not limited to, premature suspend-to-RAM aborts
on Dell XPS 13 (9343) reported by Dominik.
The issue the commit in question attempted to address is real and
will need to be taken care of going forward, but evidently more work
is needed for this purpose.
Reported-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pull networking fixes from David Miller:
1) Made TCP congestion control documentation match current reality,
from Anmol Sarma.
2) Various build warning and failure fixes from Arnd Bergmann.
3) Fix SKB list leak in ipv6_gso_segment().
4) Use after free in ravb driver, from Eugeniu Rosca.
5) Don't use udp_poll() in ping protocol driver, from Eric Dumazet.
6) Don't crash in PCI error recovery of cxgb4 driver, from Guilherme
Piccoli.
7) _SRC_NAT_DONE_BIT needs to be cleared using atomics, from Liping
Zhang.
8) Use after free in vxlan deletion, from Mark Bloch.
9) Fix ordering of NAPI poll enabled in ethoc driver, from Max
Filippov.
10) Fix stmmac hangs with TSO, from Niklas Cassel.
11) Fix crash in CALIPSO ipv6, from Richard Haines.
12) Clear nh_flags properly on mpls link up. From Roopa Prabhu.
13) Fix regression in sk_err socket error queue handling, noticed by
ping applications. From Soheil Hassas Yeganeh.
14) Update mlx4/mlx5 MAINTAINERS information.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (78 commits)
net: stmmac: fix a broken u32 less than zero check
net: stmmac: fix completely hung TX when using TSO
net: ethoc: enable NAPI before poll may be scheduled
net: bridge: fix a null pointer dereference in br_afspec
ravb: Fix use-after-free on `ifconfig eth0 down`
net/ipv6: Fix CALIPSO causing GPF with datagram support
net: stmmac: ensure jumbo_frm error return is correctly checked for -ve value
Revert "sit: reload iphdr in ipip6_rcv"
i40e/i40evf: proper update of the page_offset field
i40e: Fix state flags for bit set and clean operations of PF
iwlwifi: fix host command memory leaks
iwlwifi: fix min API version for 7265D, 3168, 8000 and 8265
iwlwifi: mvm: clear new beacon command template struct
iwlwifi: mvm: don't fail when removing a key from an inexisting sta
iwlwifi: pcie: only use d0i3 in suspend/resume if system_pm is set to d0i3
iwlwifi: mvm: fix firmware debug restart recording
iwlwifi: tt: move ucode_loaded check under mutex
iwlwifi: mvm: support ibss in dqa mode
iwlwifi: mvm: Fix command queue number on d0i3 flow
iwlwifi: mvm: rs: start using LQ command color
...
|
|
Pull sparc fixes from David Miller:
1) Fix TLB context wrap races, from Pavel Tatashin.
2) Cure some gcc-7 build issues.
3) Handle invalid setup_hugepagesz command line values properly, from
Liam R Howlett.
4) Copy TSB using the correct address shift for the huge TSB, from Mike
Kravetz.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: delete old wrap code
sparc64: new context wrap
sparc64: add per-cpu mm of secondary contexts
sparc64: redefine first version
sparc64: combine activate_mm and switch_mm
sparc64: reset mm cpumask after wrap
sparc/mm/hugepages: Fix setup_hugepagesz for invalid values.
sparc: Machine description indices can vary
sparc64: mm: fix copy_tsb to correctly copy huge page TSBs
arch/sparc: support NR_CPUS = 4096
sparc64: Add __multi3 for gcc 7.x and later.
sparc64: Fix build warnings with gcc 7.
arch/sparc: increase CONFIG_NODES_SHIFT on SPARC64 to 5
|
|
GCC explicitly does not warn for unused static inline functions for
-Wunused-function. The manual states:
Warn whenever a static function is declared but not defined or
a non-inline static function is unused.
Clang does warn for static inline functions that are unused.
It turns out that suppressing the warnings avoids potentially complex
#ifdef directives, which also reduces LOC.
Suppress the warning for clang.
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pavel Tatashin says:
====================
sparc64: context wrap fixes
This patch series contains fixes for context wrap: when we are out of
context ids, and need to get a new version.
It fixes memory corruption issues which happen when more than number of
context ids (currently set to 8K) number of processes are started
simultaneously, and processes can get a wrong context.
sparc64: new context wrap:
- contains explanation of new wrap method, and also explanation of races
that it solves
sparc64: reset mm cpumask after wrap
- explains issue of not reseting cpu mask on a wrap
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The old method that is using xcall and softint to get new context id is
deleted, as it is replaced by a method of using per_cpu_secondary_mm
without xcall to perform the context wrap.
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current wrap implementation has a race issue: it is called outside of
the ctx_alloc_lock, and also does not wait for all CPUs to complete the
wrap. This means that a thread can get a new context with a new version
and another thread might still be running with the same context. The
problem is especially severe on CPUs with shared TLBs, like sun4v. I used
the following test to very quickly reproduce the problem:
- start over 8K processes (must be more than context IDs)
- write and read values at a memory location in every process.
Very quickly memory corruptions start happening, and what we read back
does not equal what we wrote.
Several approaches were explored before settling on this one:
Approach 1:
Move smp_new_mmu_context_version() inside ctx_alloc_lock, and wait for
every process to complete the wrap. (Note: every CPU must WAIT before
leaving smp_new_mmu_context_version_client() until every one arrives).
This approach ends up with deadlocks, as some threads own locks which other
threads are waiting for, and they never receive softint until these threads
exit smp_new_mmu_context_version_client(). Since we do not allow the exit,
deadlock happens.
Approach 2:
Handle wrap right during mondo interrupt. Use etrap/rtrap to enter into
into C code, and issue new versions to every CPU.
This approach adds some overhead to runtime: in switch_mm() we must add
some checks to make sure that versions have not changed due to wrap while
we were loading the new secondary context. (could be protected by PSTATE_IE
but that degrades performance as on M7 and older CPUs as it takes 50 cycles
for each access). Also, we still need a global per-cpu array of MMs to know
where we need to load new contexts, otherwise we can change context to a
thread that is going way (if we received mondo between switch_mm() and
switch_to() time). Finally, there are some issues with window registers in
rtrap() when context IDs are changed during CPU mondo time.
The approach in this patch is the simplest and has almost no impact on
runtime. We use the array with mm's where last secondary contexts were
loaded onto CPUs and bump their versions to the new generation without
changing context IDs. If a new process comes in to get a context ID, it
will go through get_new_mmu_context() because of version mismatch. But the
running processes do not need to be interrupted. And wrap is quicker as we
do not need to xcall and wait for everyone to receive and complete wrap.
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The new wrap is going to use information from this array to figure out
mm's that currently have valid secondary contexts setup.
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
CTX_FIRST_VERSION defines the first context version, but also it defines
first context. This patch redefines it to only include the first context
version.
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The only difference between these two functions is that in activate_mm we
unconditionally flush context. However, there is no need to keep this
difference after fixing a bug where cpumask was not reset on a wrap. So, in
this patch we combine these.
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After a wrap (getting a new context version) a process must get a new
context id, which means that we would need to flush the context id from
the TLB before running for the first time with this ID on every CPU. But,
we use mm_cpumask to determine if this process has been running on this CPU
before, and this mask is not reset after a wrap. So, there are two possible
fixes for this issue:
1. Clear mm cpumask whenever mm gets a new context id
2. Unconditionally flush context every time process is running on a CPU
This patch implements the first solution
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
hugetlb_bad_size needs to be called on invalid values. Also change the
pr_warn to a pr_err to better align with other platforms.
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
VIO devices were being looked up by their index in the machine
description node block, but this often varies over time as devices are
added and removed. Instead, store the ID and look up using the type,
config handle and ID.
Signed-off-by: James Clarke <jrtc27@jrtc27.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112541
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a TSB grows beyond its current capacity, a new TSB is allocated
and copy_tsb is called to copy entries from the old TSB to the new.
A hash shift based on page size is used to calculate the index of an
entry in the TSB. copy_tsb has hard coded PAGE_SHIFT in these
calculations. However, for huge page TSBs the value REAL_HPAGE_SHIFT
should be used. As a result, when copy_tsb is called for a huge page
TSB the entries are placed at the incorrect index in the newly
allocated TSB. When doing hardware table walk, the MMU does not
match these entries and we end up in the TSB miss handling code.
This code will then create and write an entry to the correct index
in the TSB. We take a performance hit for the table walk miss and
recreation of these entries.
Pass a new parameter to copy_tsb that is the page size shift to be
used when copying the TSB.
Suggested-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Linux SPARC64 limits NR_CPUS to 4064 because init_cpu_send_mondo_info()
only allocates a single page for NR_CPUS mondo entries. Thus we cannot
use all 4096 CPUs on some SPARC platforms.
To fix, allocate (2^order) pages where order is set according to the size
of cpu_list for possible cpus. Since cpu_list_pa and cpu_mondo_block_pa
are not used in asm code, there are no imm13 offsets from the base PA
that will break because they can only reach one page.
Orabug: 25505750
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Atish Patra <atish.patra@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The check that queue is less or equal to zero is always true
because queue is a u32; queue is decremented and will wrap around
and never go -ve. Fix this by making queue an int.
Detected by CoverityScan, CID#1428988 ("Unsigned compared against 0")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
stmmac_tso_allocator can fail to set the Last Descriptor bit
on a descriptor that actually was the last descriptor.
This happens when the buffer of the last descriptor ends
up having a size of exactly TSO_MAX_BUFF_SIZE.
When the IP eventually reaches the next last descriptor,
which actually has the bit set, the DMA will hang.
When the DMA hangs, we get a tx timeout, however,
since stmmac does not do a complete reset of the IP
in stmmac_tx_timeout, we end up in a state with
completely hung TX.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ethoc_reset enables device interrupts, ethoc_interrupt may schedule a
NAPI poll before NAPI is enabled in the ethoc_open, which results in
device being unable to send or receive anything until it's closed and
reopened. In case the device is flooded with ingress packets it may be
unable to recover at all.
Move napi_enable above ethoc_reset in the ethoc_open to fix that.
Fixes: a1702857724f ("net: Add support for the OpenCores 10/100 Mbps Ethernet MAC.")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We might call br_afspec() with p == NULL which is a valid use case if
the action is on the bridge device itself, but the bridge tunnel code
dereferences the p pointer without checking, so check if p is null
first.
Reported-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Fixes: efa5356b0d97 ("bridge: per vlan dst_metadata netlink support")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit a47b70ea86bd ("ravb: unmap descriptors when freeing rings") has
introduced the issue seen in [1] reproduced on H3ULCB board.
Fix this by relocating the RX skb ringbuffer free operation, so that
swiotlb page unmapping can be done first. Freeing of aligned TX buffers
is not relevant to the issue seen in [1]. Still, reposition TX free
calls as well, to have all kfree() operations performed consistently
_after_ dma_unmap_*()/dma_free_*().
[1] Console screenshot with the problem reproduced:
salvator-x login: root
root@salvator-x:~# ifconfig eth0 up
Micrel KSZ9031 Gigabit PHY e6800000.ethernet-ffffffff:00: \
attached PHY driver [Micrel KSZ9031 Gigabit PHY] \
(mii_bus:phy_addr=e6800000.ethernet-ffffffff:00, irq=235)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
root@salvator-x:~#
root@salvator-x:~# ifconfig eth0 down
==================================================================
BUG: KASAN: use-after-free in swiotlb_tbl_unmap_single+0xc4/0x35c
Write of size 1538 at addr ffff8006d884f780 by task ifconfig/1649
CPU: 0 PID: 1649 Comm: ifconfig Not tainted 4.12.0-rc4-00004-g112eb07287d1 #32
Hardware name: Renesas H3ULCB board based on r8a7795 (DT)
Call trace:
[<ffff20000808f11c>] dump_backtrace+0x0/0x3a4
[<ffff20000808f4d4>] show_stack+0x14/0x1c
[<ffff20000865970c>] dump_stack+0xf8/0x150
[<ffff20000831f8b0>] print_address_description+0x7c/0x330
[<ffff200008320010>] kasan_report+0x2e0/0x2f4
[<ffff20000831eac0>] check_memory_region+0x20/0x14c
[<ffff20000831f054>] memcpy+0x48/0x68
[<ffff20000869ed50>] swiotlb_tbl_unmap_single+0xc4/0x35c
[<ffff20000869fcf4>] unmap_single+0x90/0xa4
[<ffff20000869fd14>] swiotlb_unmap_page+0xc/0x14
[<ffff2000080a2974>] __swiotlb_unmap_page+0xcc/0xe4
[<ffff2000088acdb8>] ravb_ring_free+0x514/0x870
[<ffff2000088b25dc>] ravb_close+0x288/0x36c
[<ffff200008aaf8c4>] __dev_close_many+0x14c/0x174
[<ffff200008aaf9b4>] __dev_close+0xc8/0x144
[<ffff200008ac2100>] __dev_change_flags+0xd8/0x194
[<ffff200008ac221c>] dev_change_flags+0x60/0xb0
[<ffff200008ba2dec>] devinet_ioctl+0x484/0x9d4
[<ffff200008ba7b78>] inet_ioctl+0x190/0x194
[<ffff200008a78c44>] sock_do_ioctl+0x78/0xa8
[<ffff200008a7a128>] sock_ioctl+0x110/0x3c4
[<ffff200008365a70>] vfs_ioctl+0x90/0xa0
[<ffff200008365dbc>] do_vfs_ioctl+0x148/0xc38
[<ffff2000083668f0>] SyS_ioctl+0x44/0x74
[<ffff200008083770>] el0_svc_naked+0x24/0x28
The buggy address belongs to the page:
page:ffff7e001b6213c0 count:0 mapcount:0 mapping: (null) index:0x0
flags: 0x4000000000000000()
raw: 4000000000000000 0000000000000000 0000000000000000 00000000ffffffff
raw: 0000000000000000 ffff7e001b6213e0 0000000000000000 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8006d884f680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff8006d884f700: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff8006d884f780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff8006d884f800: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff8006d884f880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================
Disabling lock debugging due to kernel taint
root@salvator-x:~#
Fixes: a47b70ea86bd ("ravb: unmap descriptors when freeing rings")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When using CALIPSO with IPPROTO_UDP it is possible to trigger a GPF as the
IP header may have moved.
Also update the payload length after adding the CALIPSO option.
Signed-off-by: Richard Haines <richard_c_haines@btinternet.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current comparison of entry < 0 will never be true since entry is an
unsigned integer. Make entry an int to ensure -ve error return values
from the call to jumbo_frm are correctly being caught.
Detected by CoverityScan, CID#1238760 ("Macro compares unsigned to 0")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.12
This is the usual collection of device specific fixes, all accumilated
since the merge window, plus one fix from Takashi for a nasty use after
free bug that bit some things with deferred probe and an update to the
maintainer address for the former Wolfson parts.
|
|
gcc 7.1 reports the following warning:
block/elevator.c: In function ‘elv_register’:
block/elevator.c:898:5: warning: ‘snprintf’ output may be truncated before the last format character [-Wformat-truncation=]
"%s_io_cq", e->elevator_name);
^~~~~~~~~~
block/elevator.c:897:3: note: ‘snprintf’ output between 7 and 22 bytes into a destination of size 21
snprintf(e->icq_cache_name, sizeof(e->icq_cache_name),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"%s_io_cq", e->elevator_name);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The bug is that the name of the icq_cache is 6 characters longer than
the elevator name, but only ELV_NAME_MAX + 5 characters were reserved
for it --- so in the case of a maximum-length elevator name, the 'q'
character in "_io_cq" would be truncated by snprintf(). Fix it by
reserving ELV_NAME_MAX + 6 characters instead.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.12
It has been a slow start of cycle and this the first set of fixes for
4.12. Nothing really major here.
wcn36xx
* fix an issue with module reload
brcmfmac
* fix aligment regression on 64 bit systems
iwlwifi
* fixes for memory leaks, runtime PM, memory initialisation and other
smaller problems
* fix IBSS on devices using DQA mode (7260 and up)
* fix the minimum firmware API requirement for 7265D, 3168, 8000 and
8265
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Some bug fixes:
- Don't fail build if atomisp has warnings
- Some CEC Kconfig changes to allow it to be used by DRM without
media dependencies
- A race fix at RC initialization code
- A driver fix at rainshadow-cec
IMHO, the one that affects most people in this series is a build fix:
if you try to build the Kernel with W=1 or using gcc7 and
all[yes|mod]config, build will fail due to -Werror at atomisp
makefiles"
* tag 'media/v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] rc-core: race condition during ir_raw_event_register()
[media] cec: drop MEDIA_CEC_DEBUG
[media] cec: rename MEDIA_CEC_NOTIFIER to CEC_NOTIFIER
[media] cec: select CEC_CORE instead of depend on it
[media] rainshadow-cec: ensure exit_loop is intialized
[media] atomisp: don't treat warnings as errors
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2017-06-06
This series contains fixes to i40e and i40evf only.
Mauro S. M. Rodrigues fixes a flood in the kernel log which was introduced
in a previous commit because of a mistaken substitution of __I40E_VSI_DOWN
instead of __I40E_DOWN when testing the state of the PF.
Björn Töpel fixes an issue introduced in a previous commit where the
offset was incorrect and could lead to data corruption for architectures
using PAGE_SIZE larger than 8191. Fixed the issue by updating the
page_offset correctly using the proper setting for truesize.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If queue is stopped, we shouldn't dispatch request into driver and
hardware, unfortunately the check is removed in bd166ef183c2(blk-mq-sched:
add framework for MQ capable IO schedulers).
This patch fixes the issue by moving the check back into
__blk_mq_try_issue_directly().
This patch fixes request use-after-free[1][2] during canceling requets
of NVMe in nvme_dev_disable(), which can be triggered easily during
NVMe reset & remove test.
[1] oops kernel log when CONFIG_BLK_DEV_INTEGRITY is on
[ 103.412969] BUG: unable to handle kernel NULL pointer dereference at 000000000000000a
[ 103.412980] IP: bio_integrity_advance+0x48/0xf0
[ 103.412981] PGD 275a88067
[ 103.412981] P4D 275a88067
[ 103.412982] PUD 276c43067
[ 103.412983] PMD 0
[ 103.412984]
[ 103.412986] Oops: 0000 [#1] SMP
[ 103.412989] Modules linked in: vfat fat intel_rapl sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel crypto_simd cryptd ipmi_ssif iTCO_wdt iTCO_vendor_support mxm_wmi glue_helper dcdbas ipmi_si mei_me pcspkr mei sg ipmi_devintf lpc_ich ipmi_msghandler shpchp acpi_power_meter wmi nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm crc32c_intel nvme ahci nvme_core libahci libata tg3 i2c_core megaraid_sas ptp pps_core dm_mirror dm_region_hash dm_log dm_mod
[ 103.413035] CPU: 0 PID: 102 Comm: kworker/0:2 Not tainted 4.11.0+ #1
[ 103.413036] Hardware name: Dell Inc. PowerEdge R730xd/072T6D, BIOS 2.2.5 09/06/2016
[ 103.413041] Workqueue: events nvme_remove_dead_ctrl_work [nvme]
[ 103.413043] task: ffff9cc8775c8000 task.stack: ffffc033c252c000
[ 103.413045] RIP: 0010:bio_integrity_advance+0x48/0xf0
[ 103.413046] RSP: 0018:ffffc033c252fc10 EFLAGS: 00010202
[ 103.413048] RAX: 0000000000000000 RBX: ffff9cc8720a8cc0 RCX: ffff9cca72958240
[ 103.413049] RDX: ffff9cca72958000 RSI: 0000000000000008 RDI: ffff9cc872537f00
[ 103.413049] RBP: ffffc033c252fc28 R08: 0000000000000000 R09: ffffffffb963a0d5
[ 103.413050] R10: 000000000000063e R11: 0000000000000000 R12: ffff9cc8720a8d18
[ 103.413051] R13: 0000000000001000 R14: ffff9cc872682e00 R15: 00000000fffffffb
[ 103.413053] FS: 0000000000000000(0000) GS:ffff9cc877c00000(0000) knlGS:0000000000000000
[ 103.413054] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 103.413055] CR2: 000000000000000a CR3: 0000000276c41000 CR4: 00000000001406f0
[ 103.413056] Call Trace:
[ 103.413063] bio_advance+0x2a/0xe0
[ 103.413067] blk_update_request+0x76/0x330
[ 103.413072] blk_mq_end_request+0x1a/0x70
[ 103.413074] blk_mq_dispatch_rq_list+0x370/0x410
[ 103.413076] ? blk_mq_flush_busy_ctxs+0x94/0xe0
[ 103.413080] blk_mq_sched_dispatch_requests+0x173/0x1a0
[ 103.413083] __blk_mq_run_hw_queue+0x8e/0xa0
[ 103.413085] __blk_mq_delay_run_hw_queue+0x9d/0xa0
[ 103.413088] blk_mq_start_hw_queue+0x17/0x20
[ 103.413090] blk_mq_start_hw_queues+0x32/0x50
[ 103.413095] nvme_kill_queues+0x54/0x80 [nvme_core]
[ 103.413097] nvme_remove_dead_ctrl_work+0x1f/0x40 [nvme]
[ 103.413103] process_one_work+0x149/0x360
[ 103.413105] worker_thread+0x4d/0x3c0
[ 103.413109] kthread+0x109/0x140
[ 103.413111] ? rescuer_thread+0x380/0x380
[ 103.413113] ? kthread_park+0x60/0x60
[ 103.413120] ret_from_fork+0x2c/0x40
[ 103.413121] Code: 08 4c 8b 63 50 48 8b 80 80 00 00 00 48 8b 90 d0 03 00 00 31 c0 48 83 ba 40 02 00 00 00 48 8d 8a 40 02 00 00 48 0f 45 c1 c1 ee 09 <0f> b6 48 0a 0f b6 40 09 41 89 f5 83 e9 09 41 d3 ed 44 0f af e8
[ 103.413145] RIP: bio_integrity_advance+0x48/0xf0 RSP: ffffc033c252fc10
[ 103.413146] CR2: 000000000000000a
[ 103.413157] ---[ end trace cd6875d16eb5a11e ]---
[ 103.455368] Kernel panic - not syncing: Fatal exception
[ 103.459826] Kernel Offset: 0x37600000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[ 103.850916] ---[ end Kernel panic - not syncing: Fatal exception
[ 103.857637] sched: Unexpected reschedule of offline CPU#1!
[ 103.863762] ------------[ cut here ]------------
[2] kernel hang in blk_mq_freeze_queue_wait() when CONFIG_BLK_DEV_INTEGRITY is off
[ 247.129825] INFO: task nvme-test:1772 blocked for more than 120 seconds.
[ 247.137311] Not tainted 4.12.0-rc2.upstream+ #4
[ 247.142954] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 247.151704] Call Trace:
[ 247.154445] __schedule+0x28a/0x880
[ 247.158341] schedule+0x36/0x80
[ 247.161850] blk_mq_freeze_queue_wait+0x4b/0xb0
[ 247.166913] ? remove_wait_queue+0x60/0x60
[ 247.171485] blk_freeze_queue+0x1a/0x20
[ 247.175770] blk_cleanup_queue+0x7f/0x140
[ 247.180252] nvme_ns_remove+0xa3/0xb0 [nvme_core]
[ 247.185503] nvme_remove_namespaces+0x32/0x50 [nvme_core]
[ 247.191532] nvme_uninit_ctrl+0x2d/0xa0 [nvme_core]
[ 247.196977] nvme_remove+0x70/0x110 [nvme]
[ 247.201545] pci_device_remove+0x39/0xc0
[ 247.205927] device_release_driver_internal+0x141/0x200
[ 247.211761] device_release_driver+0x12/0x20
[ 247.216531] pci_stop_bus_device+0x8c/0xa0
[ 247.221104] pci_stop_and_remove_bus_device_locked+0x1a/0x30
[ 247.227420] remove_store+0x7c/0x90
[ 247.231320] dev_attr_store+0x18/0x30
[ 247.235409] sysfs_kf_write+0x3a/0x50
[ 247.239497] kernfs_fop_write+0xff/0x180
[ 247.243867] __vfs_write+0x37/0x160
[ 247.247757] ? selinux_file_permission+0xe5/0x120
[ 247.253011] ? security_file_permission+0x3b/0xc0
[ 247.258260] vfs_write+0xb2/0x1b0
[ 247.261964] ? syscall_trace_enter+0x1d0/0x2b0
[ 247.266924] SyS_write+0x55/0xc0
[ 247.270540] do_syscall_64+0x67/0x150
[ 247.274636] entry_SYSCALL64_slow_path+0x25/0x25
[ 247.279794] RIP: 0033:0x7f5c96740840
[ 247.283785] RSP: 002b:00007ffd00e87ee8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 247.292238] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f5c96740840
[ 247.300194] RDX: 0000000000000002 RSI: 00007f5c97060000 RDI: 0000000000000001
[ 247.308159] RBP: 00007f5c97060000 R08: 000000000000000a R09: 00007f5c97059740
[ 247.316123] R10: 0000000000000001 R11: 0000000000000246 R12: 00007f5c96a14400
[ 247.324087] R13: 0000000000000002 R14: 0000000000000001 R15: 0000000000000000
[ 370.016340] INFO: task nvme-test:1772 blocked for more than 120 seconds.
Fixes: 12d70958a2e8(blk-mq: don't fail allocating driver tag for stopped hw queue)
Cc: stable@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
When direct issue is done on request picked up from plug list,
the hctx need to be updated with the actual hw queue, otherwise
wrong hctx is used and may hurt performance, especially when
wrong SRCU readlock is acquired/released
Reported-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
This reverts commit b699d0035836f6712917a41e7ae58d84359b8ff9.
As per Eric Dumazet, the pskb_may_pull() is a NOP in this
particular case, so the 'iph' reload is unnecessary.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This fixes a regression introduced by ebc944613567 ("drm:
convert drivers to use drm_of_find_panel_or_bridge") that was
recently merged, causing HDMI output to not work.
For the kirin driver, the port value should be 1 instead of 0,
so this oneline patch fixes it and gets graphics working again.
Cc: Rob Herring <robh@kernel.org>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Xinliang Liu <xinliang.liu@linaro.org>
Fix-suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Xinliang Liu <xinliang.liu@linaro.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1495557626-25285-1-git-send-email-john.stultz@linaro.org
|
|
Commit 8d911904f3ce4 ('powerpc/perf: Add restrictions to PMC5 in power9 DD1')
was added to restrict the use of PMC5 in Power9 DD1. Intention was to disable
the use of PMC5 using raw event code. But instead of updating the
power9_isa207_pmu structure (used on DD1), the commit incorrectly updated the
power9_pmu structure. Fix it.
Fixes: 8d911904f3ce ("powerpc/perf: Add restrictions to PMC5 in power9 DD1")
Reported-by: Shriya <shriyak@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Tested-by: Shriya <shriyak@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
