| Age | Commit message (Collapse) | Author |
|---|
|
Since set_rx_ignore_pause_frames() in struct mac_driver
is unused, so remove it.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since set_autoneg() in struct hnae_ae_ops is unused, so remove it.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since get_autoneg() in struct hnae_ae_ops is unused, so remove it.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Three fixes for the Qualcomm clk driver: two for regressions this
merge window and one for a long-standing problem that only popped up
now that eMMC is being used"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: gcc-sc7180: Use floor ops for the correct sdcc1 clk
clk: qcom: rcg2: Rectify clk_gfx3d rate rounding without mux division
clk: qcom: rpmh: Update the XO clock source for SC7280
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Hans de Goede:
"A set of bug-fixes and some model specific quirks.
Summary:
- dell-wmi-sysman: A set of probe-error-exit-handling fixes to fix
some systems which advertise the WMI GUIDs, but are not compatible,
not booting
- intel-vbtn/intel-hid: Misc. bugfixes
- intel_pmc: Bug-fixes + a quirk to lower suspend power-consumption
on Tiger Lake
- thinkpad_acpi: misc bugfixes"
* tag 'platform-drivers-x86-v5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: intel_pmc_core: Ignore GBE LTR on Tiger Lake platforms
platform/x86: intel_pmc_core: Update Kconfig
platform/x86: intel_pmt_crashlog: Fix incorrect macros
platform/x86: intel_pmt_class: Initial resource to 0
platform/x86: intel-vbtn: Stop reporting SW_DOCK events
platform/x86: dell-wmi-sysman: Cleanup create_attributes_level_sysfs_files()
platform/x86: dell-wmi-sysman: Make sysman_init() return -ENODEV of the interfaces are not found
platform/x86: dell-wmi-sysman: Cleanup sysman_init() error-exit handling
platform/x86: dell-wmi-sysman: Fix release_attributes_data() getting called twice on init_bios_attributes() failure
platform/x86: dell-wmi-sysman: Make it safe to call exit_foo_attributes() multiple times
platform/x86: dell-wmi-sysman: Fix possible NULL pointer deref on exit
platform/x86: dell-wmi-sysman: Fix crash caused by calling kset_unregister twice
platform/x86: thinkpad_acpi: Disable DYTC CQL mode around switching to balanced mode
platform/x86: thinkpad_acpi: Allow the FnLock LED to change state
platform/x86: thinkpad_acpi: check dytc version for lapmode sysfs
platform/x86: intel-hid: Support Lenovo ThinkPad X1 Tablet Gen 2
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull cachefiles and afs fixes from David Howells:
"Fixes from Matthew Wilcox for page waiting-related issues in
cachefiles and afs as extracted from his folio series[1]:
- In cachefiles, remove the use of the wait_bit_key struct to access
something that's actually in wait_page_key format. The proper
struct is now available in the header, so that should be used
instead.
- Add a proper wait function for waiting killably on the page
writeback flag. This includes a recent bugfix[2] that's not in the
afs code.
- In afs, use the function added in (2) rather than using
wait_on_page_bit_killable() which doesn't provide the
aforementioned bugfix"
Link: https://lore.kernel.org/r/20210320054104.1300774-1-willy@infradead.org[1]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c2407cf7d22d0c0d94cf20342b3b8f06f1d904e7 [2]
Link: https://lore.kernel.org/r/20210323120829.GC1719932@casper.infradead.org/ # v1
* tag 'afs-cachefiles-fixes-20210323' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Use wait_on_page_writeback_killable
mm/writeback: Add wait_on_page_writeback_killable
fs/cachefiles: Remove wait_bit_key layout dependency
|
|
Based on discussions (e.g. in [1]) my understanding of cachefiles and
the cachefiles userspace daemon is that it creates a cache on a local
filesystem (e.g. ext4, xfs etc.) for a network filesystem. The way this
is done is by writing "bind" to /dev/cachefiles and pointing it to the
directory to use as the cache.
Currently this directory can technically also be an idmapped mount but
cachefiles aren't yet fully aware of such mounts and thus don't take the
idmapping into account when creating cache entries. This could leave
users confused as the ownership of the files wouldn't match to what they
expressed in the idmapping. Block cache files on idmapped mounts until
the fscache rework is done and we have ported it to support idmapped
mounts.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/lkml/20210303161528.n3jzg66ou2wa43qb@wittgenstein [1]
Link: https://lore.kernel.org/r/20210316112257.2974212-1-christian.brauner@ubuntu.com/ # v1
Link: https://listman.redhat.com/archives/linux-cachefs/2021-March/msg00044.html # v2
Link: https://lore.kernel.org/r/20210319114146.410329-1-christian.brauner@ubuntu.com/ # v3
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
gcc -Wextra wants type modifiers in the normal order:
kernel/bpf/bpf_lsm.c:70:1: error: 'static' is not at beginning of declaration [-Werror=old-style-declaration]
70 | const static struct bpf_func_proto bpf_bprm_opts_set_proto = {
| ^~~~~
kernel/bpf/bpf_lsm.c:91:1: error: 'static' is not at beginning of declaration [-Werror=old-style-declaration]
91 | const static struct bpf_func_proto bpf_ima_inode_hash_proto = {
| ^~~~~
Fixes: 3f6719c7b62f ("bpf: Add bpf_bprm_opts_set helper")
Fixes: 27672f0d280a ("bpf: Add a BPF helper for getting the IMA hash of an inode")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20210322215201.1097281-1-arnd@kernel.org
|
|
netdev_wait_allrefs() issues a warning if refcount does not drop to 0
after 10 seconds. While 10 second wait generally should not happen
under normal workload in normal environment, it seems to fire falsely
very often during fuzzing and/or in qemu emulation (~10x slower).
At least it's not possible to understand if it's really a false
positive or not. Automated testing generally bumps all timeouts
to very high values to avoid flake failures.
Add net.core.netdev_unregister_timeout_secs sysctl to make
the timeout configurable for automated testing systems.
Lowering the timeout may also be useful for e.g. manual bisection.
The default value matches the current behavior.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=211877
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
vhca_event.h has been included at line 4, so remove the
duplicate one at line 8.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
indir_table.h has been included at line 41, so remove
the duplicate one at line 43.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is possible for a 32 bit x86 build to use a 64 bit DMA address.
There are two remaining spots where the IPA driver does a modulo
operation to check alignment of a DMA address, and under certain
conditions this can lead to a build error on i386 (at least).
The alignment checks we're doing are for power-of-2 values, and this
means the lower 32 bits of the DMA address can be used. This ensures
both operands to the modulo operator are 32 bits wide.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2021-03-23
This series contains updates to ice, fm10k, i40e, iavf, ixgbe, ixgbevf,
igb, e1000e, and e1000 drivers.
Tony fixes prototype warnings for mismatched header for ice driver.
Sasha fixes prototype warnings for mismatched header for igc and e1000e
driver.
Jesse fixes prototype warnings for mismatched header for the remaining
Intel drivers: fm10k, i40e, iavf, igb, ixgbe, and ixgbevf.
Gustavo A. R. Silva explicitly adds a break instead of falling through
in preparation of -Wimplicit-fallthrough for Clang to ice, fm10k,
ixgbe, igb, ixgbevf, and e1000 drivers,
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Vladimir Oltean says:
====================
Better support for sandwiched LAGs with bridge and DSA
Changes in v4:
- Added missing EXPORT_SYMBOL_GPL
- Using READ_ONCE(fdb->dst)
- Split patches into (a) adding the bridge helpers (b) making DSA use them
- br_mdb_replay went back to the v1 approach where it allocated memory
in atomic context
- Created a br_switchdev_mdb_populate which reduces some of the code
duplication
- Fixed the error message in dsa_port_clear_brport_flags
- Replaced "dsa_port_vlan_filtering(dp, br, extack)" with
"dsa_port_vlan_filtering(dp, br_vlan_enabled(br), extack)" (duh)
- Added review tags (sorry if I missed any)
The objective of this series is to make LAG uppers on top of switchdev
ports work regardless of which order we link interfaces to their masters
(first make the port join the LAG, then the LAG join the bridge, or the
other way around).
There was a design decision to be made in patches 2-4 on whether we
should adopt the "push" model (which attempts to solve the problem
centrally, in the bridge layer) where the driver just calls:
switchdev_bridge_port_offloaded(brport_dev,
&atomic_notifier_block,
&blocking_notifier_block,
extack);
and the bridge just replays the entire collection of switchdev port
attributes and objects that it has, in some predefined order and with
some predefined error handling logic;
or the "pull" model (which attempts to solve the problem by giving the
driver the rope to hang itself), where the driver, apart from calling:
switchdev_bridge_port_offloaded(brport_dev, extack);
has the task of "dumpster diving" (as Tobias puts it) through the bridge
attributes and objects by itself, by calling:
- br_vlan_replay
- br_fdb_replay
- br_mdb_replay
- br_vlan_enabled
- br_port_flag_is_set
- br_port_get_stp_state
- br_multicast_router
- br_get_ageing_time
(not necessarily all of them, and not necessarily in this order, and
with driver-defined error handling).
Even though I'm not in love myself with the "pull" model, I chose it
because there is a fundamental trick with replaying switchdev events
like this:
ip link add br0 type bridge
ip link add bond0 type bond
ip link set bond0 master br0
ip link set swp0 master bond0 <- this will replay the objects once for
the bond0 bridge port, and the swp0
switchdev port will process them
ip link set swp1 master bond0 <- this will replay the objects again for
the bond0 bridge port, and the swp1
switchdev port will see them, but swp0
will see them for the second time now
Basically I believe that it is implementation defined whether the driver
wants to error out on switchdev objects seen twice on a port, and the
bridge should not enforce a certain model for that. For example, for FDB
entries added to a bonding interface, the underling switchdev driver
might have an abstraction for just that: an FDB entry pointing towards a
logical (as opposed to physical) port. So when the second port joins the
bridge, it doesn't realy need to replay FDB entries, since there is
already at least one hardware port which has been receiving those
events, and the FDB entries don't need to be added a second time to the
same logical port.
In the other corner, we have the drivers that handle switchdev port
attributes on a LAG as individual switchdev port attributes on physical
ports (example: VLAN filtering). In fact, the switchdev_handle_port_attr_set
helper facilitates this: it is a fan-out from a single orig_dev towards
multiple lowers that pass the check_cb().
But that's the point: switchdev_handle_port_attr_set is just a helper
which the driver _opts_ to use. The bridge can't enforce the "push"
model, because that would assume that all drivers handle port attributes
in the same way, which is probably false.
For this reason, I preferred to go with the "pull" mode for this patch
set. Just to see how bad it is for other switchdev drivers to copy-paste
this logic, I added the pull support to ocelot too, and I think it's
pretty manageable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The premise of this change is that the switchdev port attributes and
objects offloaded by ocelot might have been missed when we are joining
an already existing bridge port, such as a bonding interface.
The patch pulls these switchdev attributes and objects from the bridge,
on behalf of the 'bridge port' net device which might be either the
ocelot switch interface, or the bonding upper interface.
The ocelot_net.c belongs strictly to the switchdev ocelot driver, while
ocelot.c is part of a library shared with the DSA felix driver.
The ocelot_port_bridge_leave function (part of the common library) used
to call ocelot_port_vlan_filtering(false), something which is not
necessary for DSA, since the framework deals with that already there.
So we move this function to ocelot_switchdev_unsync, which is specific
to the switchdev driver.
The code movement described above makes ocelot_port_bridge_leave no
longer return an error code, so we change its type from int to void.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Similar to the DSA situation, ocelot supports LAG offload but treats
this scenario improperly:
ip link add br0 type bridge
ip link add bond0 type bond
ip link set bond0 master br0
ip link set swp0 master bond0
We do the same thing as we do there, which is to simulate a 'bridge join'
on 'lag join', if we detect that the bonding upper has a bridge upper.
Again, same as DSA, ocelot supports software fallback for LAG, and in
that case, we should avoid calling ocelot_netdevice_changeupper.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If we join an already-created bridge port, such as a bond master
interface, then we can miss the initial switchdev notifications emitted
by the bridge for this port, while it wasn't offloaded by anybody.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
DSA currently assumes that the bridge port starts off with this
constellation of bridge port flags:
- learning on
- unicast flooding on
- multicast flooding on
- broadcast flooding on
just by virtue of code copy-pasta from the bridge layer (new_nbp).
This was a simple enough strategy thus far, because the 'bridge join'
moment always coincided with the 'bridge port creation' moment.
But with sandwiched interfaces, such as:
br0
|
bond0
|
swp0
it may happen that the user has had time to change the bridge port flags
of bond0 before enslaving swp0 to it. In that case, swp0 will falsely
assume that the bridge port flags are those determined by new_nbp, when
in fact this can happen:
ip link add br0 type bridge
ip link add bond0 type bond
ip link set bond0 master br0
ip link set bond0 type bridge_slave learning off
ip link set swp0 master br0
Now swp0 has learning enabled, bond0 has learning disabled. Not nice.
Fix this by "dumpster diving" through the actual bridge port flags with
br_port_flag_is_set, at bridge join time.
We use this opportunity to split dsa_port_change_brport_flags into two
distinct functions called dsa_port_inherit_brport_flags and
dsa_port_clear_brport_flags, now that the implementation for the two
cases is no longer similar. This patch also creates two functions called
dsa_port_switchdev_sync and dsa_port_switchdev_unsync which collect what
we have so far, even if that's asymmetrical. More is going to be added
in the next patch.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a pretty noisy change that was broken out of the larger change
for replaying switchdev attributes and objects at bridge join time,
which is when these extack objects are actually used.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
bridge
DSA can properly detect and offload this sequence of operations:
ip link add br0 type bridge
ip link add bond0 type bond
ip link set swp0 master bond0
ip link set bond0 master br0
But not this one:
ip link add br0 type bridge
ip link add bond0 type bond
ip link set bond0 master br0
ip link set swp0 master bond0
Actually the second one is more complicated, due to the elapsed time
between the enslavement of bond0 and the offloading of it via swp0, a
lot of things could have happened to the bond0 bridge port in terms of
switchdev objects (host MDBs, VLANs, altered STP state etc). So this is
a bit of a can of worms, and making sure that the DSA port's state is in
sync with this already existing bridge port is handled in the next
patches.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently this simple setup with DSA:
ip link add br0 type bridge vlan_filtering 1
ip link add bond0 type bond
ip link set bond0 master br0
ip link set swp0 master bond0
will not work because the bridge has created the PVID in br_add_if ->
nbp_vlan_init, and it has notified switchdev of the existence of VLAN 1,
but that was too early, since swp0 was not yet a lower of bond0, so it
had no reason to act upon that notification.
We need a helper in the bridge to replay the switchdev VLAN objects that
were notified since the bridge port creation, because some of them may
have been missed.
As opposed to the br_mdb_replay function, the vg->vlan_list write side
protection is offered by the rtnl_mutex which is sleepable, so we don't
need to queue up the objects in atomic context, we can replay them right
away.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a switchdev port starts offloading a LAG that is already in a
bridge and has an FDB entry pointing to it:
ip link set bond0 master br0
bridge fdb add dev bond0 00:01:02:03:04:05 master static
ip link set swp0 master bond0
the switchdev driver will have no idea that this FDB entry is there,
because it missed the switchdev event emitted at its creation.
Ido Schimmel pointed this out during a discussion about challenges with
switchdev offloading of stacked interfaces between the physical port and
the bridge, and recommended to just catch that condition and deny the
CHANGEUPPER event:
https://lore.kernel.org/netdev/20210210105949.GB287766@shredder.lan/
But in fact, we might need to deal with the hard thing anyway, which is
to replay all FDB addresses relevant to this port, because it isn't just
static FDB entries, but also local addresses (ones that are not
forwarded but terminated by the bridge). There, we can't just say 'oh
yeah, there was an upper already so I'm not joining that'.
So, similar to the logic for replaying MDB entries, add a function that
must be called by individual switchdev drivers and replays local FDB
entries as well as ones pointing towards a bridge port. This time, we
use the atomic switchdev notifier block, since that's what FDB entries
expect for some reason.
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I have a system with DSA ports, and udhcpcd is configured to bring
interfaces up as soon as they are created.
I create a bridge as follows:
ip link add br0 type bridge
As soon as I create the bridge and udhcpcd brings it up, I also have
avahi which automatically starts sending IPv6 packets to advertise some
local services, and because of that, the br0 bridge joins the following
IPv6 groups due to the code path detailed below:
33:33:ff:6d:c1:9c vid 0
33:33:00:00:00:6a vid 0
33:33:00:00:00:fb vid 0
br_dev_xmit
-> br_multicast_rcv
-> br_ip6_multicast_add_group
-> __br_multicast_add_group
-> br_multicast_host_join
-> br_mdb_notify
This is all fine, but inside br_mdb_notify we have br_mdb_switchdev_host
hooked up, and switchdev will attempt to offload the host joined groups
to an empty list of ports. Of course nobody offloads them.
Then when we add a port to br0:
ip link set swp0 master br0
the bridge doesn't replay the host-joined MDB entries from br_add_if,
and eventually the host joined addresses expire, and a switchdev
notification for deleting it is emitted, but surprise, the original
addition was already completely missed.
The strategy to address this problem is to replay the MDB entries (both
the port ones and the host joined ones) when the new port joins the
bridge, similar to what vxlan_fdb_replay does (in that case, its FDB can
be populated and only then attached to a bridge that you offload).
However there are 2 possibilities: the addresses can be 'pushed' by the
bridge into the port, or the port can 'pull' them from the bridge.
Considering that in the general case, the new port can be really late to
the party, and there may have been many other switchdev ports that
already received the initial notification, we would like to avoid
delivering duplicate events to them, since they might misbehave. And
currently, the bridge calls the entire switchdev notifier chain, whereas
for replaying it should just call the notifier block of the new guy.
But the bridge doesn't know what is the new guy's notifier block, it
just knows where the switchdev notifier chain is. So for simplification,
we make this a driver-initiated pull for now, and the notifier block is
passed as an argument.
To emulate the calling context for mdb objects (deferred and put on the
blocking notifier chain), we must iterate under RCU protection through
the bridge's mdb entries, queue them, and only call them once we're out
of the RCU read-side critical section.
There was some opportunity for reuse between br_mdb_switchdev_host_port,
br_mdb_notify and the newly added br_mdb_queue_one in how the switchdev
mdb object is created, so a helper was created.
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The SWITCHDEV_ATTR_ID_BRIDGE_AGEING_TIME attribute is only emitted from:
sysfs/ioctl/netlink
-> br_set_ageing_time
-> __set_ageing_time
therefore not at bridge port creation time, so:
(a) switchdev drivers have to hardcode the initial value for the address
ageing time, because they didn't get any notification
(b) that hardcoded value can be out of sync, if the user changes the
ageing time before enslaving the port to the bridge
We need a helper in the bridge, such that switchdev drivers can query
the current value of the bridge ageing time when they start offloading
it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It may happen that we have the following topology with DSA or any other
switchdev driver with LAG offload:
ip link add br0 type bridge stp_state 1
ip link add bond0 type bond
ip link set bond0 master br0
ip link set swp0 master bond0
ip link set swp1 master bond0
STP decides that it should put bond0 into the BLOCKING state, and
that's that. The ports that are actively listening for the switchdev
port attributes emitted for the bond0 bridge port (because they are
offloading it) and have the honor of seeing that switchdev port
attribute can react to it, so we can program swp0 and swp1 into the
BLOCKING state.
But if then we do:
ip link set swp2 master bond0
then as far as the bridge is concerned, nothing has changed: it still
has one bridge port. But this new bridge port will not see any STP state
change notification and will remain FORWARDING, which is how the
standalone code leaves it in.
We need a function in the bridge driver which retrieves the current STP
state, such that drivers can synchronize to it when they may have missed
switchdev events.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As explained in this discussion:
https://lore.kernel.org/netdev/20210117193009.io3nungdwuzmo5f7@skbuf/
the switchdev notifiers for FDB entries managed to have a zero-day bug.
The bridge would not say that this entry is local:
ip link add br0 type bridge
ip link set swp0 master br0
bridge fdb add dev swp0 00:01:02:03:04:05 master local
and the switchdev driver would be more than happy to offload it as a
normal static FDB entry. This is despite the fact that 'local' and
non-'local' entries have completely opposite directions: a local entry
is locally terminated and not forwarded, whereas a static entry is
forwarded and not locally terminated. So, for example, DSA would install
this entry on swp0 instead of installing it on the CPU port as it should.
There is an even sadder part, which is that the 'local' flag is implicit
if 'static' is not specified, meaning that this command produces the
same result of adding a 'local' entry:
bridge fdb add dev swp0 00:01:02:03:04:05 master
I've updated the man pages for 'bridge', and after reading it now, it
should be pretty clear to any user that the commands above were broken
and should have never resulted in the 00:01:02:03:04:05 address being
forwarded (this behavior is coherent with non-switchdev interfaces):
https://patchwork.kernel.org/project/netdevbpf/cover/20210211104502.2081443-1-olteanv@gmail.com/
If you're a user reading this and this is what you want, just use:
bridge fdb add dev swp0 00:01:02:03:04:05 master static
Because switchdev should have given drivers the means from day one to
classify FDB entries as local/non-local, but didn't, it means that all
drivers are currently broken. So we can just as well omit the switchdev
notifications for local FDB entries, which is exactly what this patch
does to close the bug in stable trees. For further development work
where drivers might want to trap the local FDB entries to the host, we
can add a 'bool is_local' to br_switchdev_fdb_call_notifiers(), and
selectively make drivers act upon that bit, while all the others ignore
those entries if the 'is_local' bit is set.
Fixes: 6b26b51b1d13 ("net: bridge: Add support for notifying devices about FDB add/del")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Invalid detection works with two distinct moments: act_ct tries to find
a conntrack entry and set post_ct true, indicating that that was
attempted. Then, when flow dissector tries to dissect CT info and no
entry is there, it knows that it was tried and no entry was found, and
synthesizes/sets
key->ct_state = TCA_FLOWER_KEY_CT_FLAGS_TRACKED |
TCA_FLOWER_KEY_CT_FLAGS_INVALID;
mimicing what OVS does.
OVS has this a bit more streamlined, as it recomputes the key after
trying to find a conntrack entry for it.
Issue here is, when we have 'tc action ct clear', it didn't clear
post_ct, causing a subsequent match on 'ct_state -trk' to fail, due to
the above. The fix, thus, is to clear it.
Reproducer rules:
tc filter add dev enp130s0f0np0_0 ingress prio 1 chain 0 \
protocol ip flower ip_proto tcp ct_state -trk \
action ct zone 1 pipe \
action goto chain 2
tc filter add dev enp130s0f0np0_0 ingress prio 1 chain 2 \
protocol ip flower \
action ct clear pipe \
action goto chain 4
tc filter add dev enp130s0f0np0_0 ingress prio 1 chain 4 \
protocol ip flower ct_state -trk \
action mirred egress redirect dev enp130s0f1np1_0
With the fix, the 3rd rule matches, like it does with OVS kernel
datapath.
Fixes: 7baf2429a1a9 ("net/sched: cls_flower add CT_FLAGS_INVALID flag support")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Problem:
The "lapb_t1timer_running" function in "lapb_timer.c" is used in only
one place: in the "lapb_kick" function in "lapb_out.c". "lapb_kick" calls
"lapb_t1timer_running" to check if the timer is already pending, and if
it is not, schedule it to run.
However, if the timer has already fired and is running, and is waiting to
get the "lapb->lock" lock, "lapb_t1timer_running" will not detect this,
and "lapb_kick" will then schedule a new timer. The old timer will then
abort when it sees a new timer pending.
I think this is not right. The purpose of "lapb_kick" should be ensuring
that the actual work of the timer function is scheduled to be done.
If the timer function is already running but waiting for the lock,
"lapb_kick" should not abort and reschedule it.
Changes made:
I added a new field "t1timer_running" in "struct lapb_cb" for
"lapb_t1timer_running" to use. "t1timer_running" will accurately reflect
whether the actual work of the timer is pending. If the timer has fired
but is still waiting for the lock, "t1timer_running" will still correctly
reflect whether the actual work is waiting to be done.
The old "t1timer_stop" field, whose only responsibility is to ask a timer
(that is already running but waiting for the lock) to abort, is no longer
needed, because the new "t1timer_running" field can fully take over its
responsibility. Therefore "t1timer_stop" is deleted.
"t1timer_running" is not simply a negation of the old "t1timer_stop".
At the end of the timer function, if it does not reschedule itself,
"t1timer_running" is set to false to indicate that the timer is stopped.
For consistency of the code, I also added "t2timer_running" and deleted
"t2timer_stop".
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Open-coding this function meant it missed out on the recent bugfix
for waiters being woken by a delayed wake event from a previous
instantiation of the page[1].
[DH: Changed the patch to use vmf->page rather than variable page which
doesn't exist yet upstream]
Fixes: 1cf7a1518aef ("afs: Implement shared-writeable mmap")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: kafs-testing@auristor.com
cc: linux-afs@lists.infradead.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20210320054104.1300774-4-willy@infradead.org
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c2407cf7d22d0c0d94cf20342b3b8f06f1d904e7 [1]
|
|
This is the killable version of wait_on_page_writeback.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: kafs-testing@auristor.com
cc: linux-afs@lists.infradead.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20210320054104.1300774-3-willy@infradead.org
|
|
Cachefiles was relying on wait_page_key and wait_bit_key being the
same layout, which is fragile. Now that wait_page_key is exposed in
the pagemap.h header, we can remove that fragility
A comment on the need to maintain structure layout equivalence was added by
Linus[1] and that is no longer applicable.
Fixes: 62906027091f ("mm: add PageWaiters indicating tasks are waiting for a page bit")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: kafs-testing@auristor.com
cc: linux-cachefs@redhat.com
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20210320054104.1300774-2-willy@infradead.org/
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=3510ca20ece0150af6b10c77a74ff1b5c198e3e2 [1]
|
|
Due to a HW limitation, the Latency Tolerance Reporting (LTR) value
programmed in the Tiger Lake GBE controller is not large enough to allow
the platform to enter Package C10, which in turn prevents the platform from
achieving its low power target during suspend-to-idle. Ignore the GBE LTR
value on Tiger Lake. LTR ignore functionality is currently performed solely
by a debugfs write call. Split out the LTR code into its own function that
can be called by both the debugfs writer and by this work around.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Sasha Neftin <sasha.neftin@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210319201844.3305399-2-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The intel_pmc_core driver is mostly used as a debugging driver for Intel
platforms that support SLPS0 (S0ix). But the driver may also be used to
communicate actions to the PMC in order to ensure transition to SLPS0 on
some systems and architectures. As such the driver should be built on all
platforms it supports. Indicate this in the Kconfig. Also update the list
of supported features.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Suggested-by: Mario Limonciello <mario.limonciello@dell.com>
Link: https://lore.kernel.org/r/20210319201844.3305399-1-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Fixes off-by-one bugs in the macro assignments for the crashlog control
bits. Was initially tested on emulation but bug revealed after testing on
silicon.
Fixes: 5ef9998c96b0 ("platform/x86: Intel PMT Crashlog capability driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20210317024455.3071477-2-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Initialize the struct resource in intel_pmt_dev_register to zero to avoid a
fault should the char *name field be non-zero.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20210317024455.3071477-1-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of just letting the code
fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of just letting the code
fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of just
letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of just
letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding a couple of break statements instead of
just letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of just letting the code
fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
A bunch of header comments were showing warnings when compiling
with W=1. Fix them all at once. This changes only comments.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Correct report warnings in ich8lan.c, netdev.c phy.c and ptp.c files
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Correct report warnings in igc_i225.c
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Correct reported warnings for "warning: expecting prototype for ...
Prototype was for ... instead"
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fixes from Shuah Khan:
"Two fixes to the kunit tool from David Gow"
* tag 'linux-kselftest-kunit-fixes-5.12-rc5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: Disable PAGE_POISONING under --alltests
kunit: tool: Fix a python tuple typing error
|
|
The structures are used as place holders, so they are modified at run-time.
Obviously they may not be constants.
BUG: unable to handle page fault for address: d0643220
...
CPU: 0 PID: 110 Comm: modprobe Not tainted 5.11.0+ #1
Hardware name: Intel Corp. QUARK/GalileoGen2, BIOS 0x01000200 01/01/2014
EIP: intel_quark_mfd_probe+0x93/0x1c0 [intel_quark_i2c_gpio]
This partially reverts the commit c4a164f41554d2899bed94bdcc499263f41787b4.
While at it, add a comment to avoid similar changes in the future.
Fixes: c4a164f41554 ("mfd: Constify static struct resources")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Tested-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Skip BTF fixup step when input object file is missing BTF altogether.
Fixes: 8fd27bf69b86 ("libbpf: Add BPF static linker BTF and BTF.ext support")
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/bpf/20210319205909.1748642-3-andrii@kernel.org
|
|
Report the driver name, ASIC ID and the switch name via devlink. This is a
useful information for user space tooling.
Signed-off-by: Kurt Kanzenbach <kurt@kmk-computers.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use a temporary variable to hold the return value from
dsa_tag_driver_get() instead of assigning it to dst->tag_ops. Leaving
an error value in dst->tag_ops can result in deferencing an invalid
pointer when a deferred switch configuration happens later.
Fixes: 357f203bb3b5 ("net: dsa: keep a copy of the tagging protocol in the DSA switch tree")
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
