summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-04-18ARM: clps711x: serial driver hungs are a result of call disable_irq within ISRAlexander Shiyan
Since 2.6.30-rc1 clps711x serial driver hungs system. This is a result of call disable_irq from ISR. synchronize_irq waits for end of interrupt and goes to infinite loop. This patch fix this problem. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18tegra, serial8250: add ->handle_break() uart_port opDan Williams
The "KT" serial port has another use case for a "received break" quirk, so before adding another special case to the 8250 core take this opportunity to push such quirks out of the core and into a uart_port op. Stephen says: "If the callback function is to no longer live in 8250.c itself, arch/arm/mach-tegra/devices.c isn't logically a good place to put it, and that file will be going away once we get rid of all the board files and move solely to device tree." ...so since 8250_pci.c houses all the quirks for pci serial devices this quirk is similarly housed in of_serial.c. Once the open firmware conversion completes the infrastructure details (include/linux/of_serial.h, and the export) can all be removed to make this self contained to of_serial.c. Cc: Nhan H Mai <nhan.h.mai@intel.com> Cc: Colin Cross <ccross@android.com> Cc: Olof Johansson <olof@lixom.net> [stephen: kill CONFIG_SERIAL_TEGRA in favor just using CONFIG_ARCH_TEGRA] Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sudhakar Mamillapalli <sudhakar@fb.com> Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18OMAP2+: UART: Remove cpu checks for populating errata flagsGovindraj.R
Currently the errata is populated based on cpu checks this can be removed and replaced with module version check of uart ip block. MVR reg is provided within the uart reg map use the same to populate the errata and thus now errata population and handling can be managed within the driver itself. Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Reviewed-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18serial: pl011: implement workaround for CTS clear event issueRajanikanth H.V
Problem Observed: - interrupt status is set by rising or falling edge on CTS line - interrupt status is cleared on a .0. to .1. transition of the interrupt-clear register bit 1. - interrupt-clear register is reset by hardware once the interrupt status is .0.. Remark: It seems not possible to read this register back by the CPU though, but internally this register exists. - when simultaneous set and reset event on the interrupt status happens, then the set-event has priority and the status remains .1.. As a result the interrupt-clear register is not reset to .0., and no new .0. to .1. transition can be detected on it when writing a .1. to it. This implies race condition, the clear must be performed at least one UARTCLK the riding edge of CTS RIS interrupt. Fix: Instead of resetting UART as done in commit c16d51a32bbb61ac8fd96f78b5ce2fccfe0fb4c3 "amba pl011: workaround for uart registers lockup" do the following: write .0. and then .1. to the interrupt-clear register to make sure that this transition is detected. According to the datasheet writing a .0. does not have any effect, but actually it allows to reset the internal interrupt-clear register. Take into account: The .0. needs to last at least for one clk_uart clock period (~ 38 MHz, 26.08ns) This way we can do away with the tasklet and keep only a tiny fix triggered by the variant flag introduced in this patch. Signed-off-by: Guillaume Jaunet <guillaume.jaunet@stericsson.com> Signed-off-by: Christophe Arnal <christophe.arnal@stericsson.com> Signed-off-by: Matthias Locher <Matthias.Locher@stericsson.com> Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18USB: ehci-tegra: don't call set_irq_flags(IRQF_VALID)Stephen Warren
This call is not needed; the IRQ controller should (and does) set up interrupts correctly. set_irq_flags() isn't exported to modules, to this also fixes compilation of ehci-tegra.c as a module. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18USB: yurex: Fix missing URB_NO_TRANSFER_DMA_MAP flag in urbTomoki Sekiyama
Current probing code is setting URB_NO_TRANSFER_DMA_MAP flag into a wrong urb structure, and this causes BUG_ON with some USB host implementations. This patch fixes the issue. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18USB: yurex: Remove allocation of coherent buffer for setup-packet bufferTomoki Sekiyama
Removes allocation of coherent buffer for the control-request setup-packet buffer from the yurex driver. Using coherent buffers for setup-packet is obsolete and does not work with some USB host implementations. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18drivers/usb/misc/usbtest.c: add kfreesJulia Lawall
Free the two previously allocated buffers before exiting the function in an error case. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18USB: ehci-fsl: Fix kernel crash on mpc5121eAnatolij Gustschin
Since commit 28c56ea1431421dec51b7b229369e991481453df (powerpc/usb: fix bug of kernel hang when initializing usb) the kernel crashes on mpc5121e. mpc5121e doesn't have system interface registers, accessing this register address space cause the machine check exception and a kernel crash: ... [ 1.294596] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.316491] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller [ 1.337334] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 [ 1.358548] Machine check in kernel mode. [ 1.375917] Caused by (from SRR1=49030): Transfer error ack signal [ 1.395505] Oops: Machine check, sig: 7 [#1] [ 1.413113] MPC5121 ADS [ 1.428718] Modules linked in: [ 1.444841] NIP: c026efc4 LR: c0278b50 CTR: 00000000 [ 1.463342] REGS: df837ba0 TRAP: 0200 Not tainted (3.3.0-08839-gb5174fa) [ 1.484083] MSR: 00049030 <EE,ME,IR,DR> CR: 42042022 XER: 20000000 [ 1.504099] TASK = df834000[1] 'swapper' THREAD: df836000 [ 1.509667] GPR00: 1c000000 df837c50 df834000 df9d74e0 00000003 00000010 00000000 00000000 [ 1.531650] GPR08: 00000020 00000000 c037cdd8 e1088000 22042028 1001a69c 00000000 00000000 [ 1.553762] GPR16: 1ffbce70 00000000 1fef5b28 1fef3e08 00000000 00000000 1ffcbc7c c045b264 [ 1.575824] GPR24: 0000008b 00000002 c04a7dd0 e1088000 df33c960 df9d74e0 00000000 df9d7400 [ 1.612295] NIP [c026efc4] ehci_fsl_setup_phy+0x110/0x124 [ 1.632454] LR [c0278b50] ehci_fsl_setup+0x29c/0x304 [ 1.652065] Call Trace: [ 1.668923] [df837c50] [c0278a40] ehci_fsl_setup+0x18c/0x304 (unreliable) [ 1.690332] [df837c70] [c025cba4] usb_add_hcd+0x1f0/0x66c [ 1.710377] [df837cb0] [c0277ab8] ehci_fsl_drv_probe+0x180/0x308 [ 1.731322] [df837ce0] [c01fc7a8] platform_drv_probe+0x20/0x30 [ 1.752202] [df837cf0] [c01fb0ac] driver_probe_device+0x8c/0x214 [ 1.773491] [df837d10] [c01f956c] bus_for_each_drv+0x6c/0xa8 [ 1.794279] [df837d40] [c01fafdc] device_attach+0xb4/0xd8 [ 1.814574] [df837d60] [c01fa44c] bus_probe_device+0xa4/0xb4 [ 1.835343] [df837d80] [c01f87a8] device_add+0x52c/0x5dc [ 1.855462] [df837dd0] [c01fcd58] platform_device_add+0x124/0x1d0 [ 1.876558] [df837df0] [c036dcec] fsl_usb2_device_register+0xa0/0xd4 [ 1.897512] [df837e10] [c036df28] fsl_usb2_mph_dr_of_probe+0x208/0x264 [ 1.918253] [df837e90] [c01fc7a8] platform_drv_probe+0x20/0x30 [ 1.938300] [df837ea0] [c01fb0ac] driver_probe_device+0x8c/0x214 [ 1.958511] [df837ec0] [c01fb2f0] __driver_attach+0xbc/0xc0 [ 1.978088] [df837ee0] [c01f9608] bus_for_each_dev+0x60/0x9c [ 1.997589] [df837f10] [c01fab88] driver_attach+0x24/0x34 [ 2.016757] [df837f20] [c01fa744] bus_add_driver+0x1ac/0x274 [ 2.036339] [df837f50] [c01fb898] driver_register+0x88/0x150 [ 2.056052] [df837f70] [c01fcabc] platform_driver_register+0x68/0x78 [ 2.076650] [df837f80] [c0446500] fsl_usb2_mph_dr_driver_init+0x18/0x28 [ 2.097734] [df837f90] [c0003988] do_one_initcall+0x148/0x1b0 [ 2.117934] [df837fc0] [c042d89c] kernel_init+0xfc/0x190 [ 2.137667] [df837ff0] [c000d2c4] kernel_thread+0x4c/0x68 [ 2.157240] Instruction dump: [ 2.174119] 90050004 4e800020 2f840003 419e0014 2f840004 409eff64 6400c000 4bffff5c [ 2.196000] 64001000 7c0004ac 812b0500 0c090000 <4c00012c> 61290200 7c0004ac 912b0500 [ 2.218100] ---[ end trace 21659aedb84ad816 ]--- [ 2.237089] [ 3.232940] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 3.232954] [ 3.271575] Rebooting in 1 seconds.. Check pdata->have_sysif_regs flag before accessing system interface registers. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem fixes from James Morris. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: fcaps: clear the same personality flags as suid when fcaps are used mpi: Avoid using freed pointer in mpi_lshift_limbs() Smack: move label list initialization
2012-04-18uwb: fix error handlingOliver Neukum
Fatal errors such as a device disconnect must not trigger error handling. The error returns must be checked. Signed-off-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18uwb: fix use of del_timer_sync() in interruptOliver Neukum
del_timer_sync() cannot be used in interrupt. Replace it with del_timer() and a flag Signed-off-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18xz: Enable BCJ filters on SPARC and 32-bit x86Lasse Collin
The BCJ filters were meant to be enabled already on these archs, but the xz_wrap.sh script was buggy. Enabling the filters should give smaller kernel images. xz_wrap.sh will now use $SRCARCH instead of $ARCH to detect the architecture. That way it doesn't need to care about the subarchs (like i386 vs. x86_64) since the BCJ filters don't care either. Signed-off-by: Lasse Collin <lasse.collin@tukaani.org> Acked-by: Jan Beulich <jbeulich@suse.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-18EHCI: always clear the STS_FLR status bitAlan Stern
This patch (as1544) fixes a problem affecting some EHCI controllers. They can generate interrupts whenever the STS_FLR status bit is turned on, even though that bit is masked out in the Interrupt Enable register. Since the driver doesn't use STS_FLR anyway, the patch changes the interrupt routine to clear that bit whenever it is set, rather than leaving it alone. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18Merge tag 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev Pull libara fixes from Jeff Garzik: - Notable regression fix. Forbid dynamic runtime power management by default, due to issues with suspend/resume and hotplug. To re-enable, use sysfs. - make ata_print_id atomic, due to ref from multiple contexts - sata_mv warning fix - ata_piix new PCI ID * tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: forbid port runtime pm by default, fixing regression libata: make ata_print_id atomic sata_mv: silence an uninitialized variable warning ata_piix: IDE-mode SATA patch for Intel DH89xxCC DeviceIDs
2012-04-18xen/blkback: Fix warning error.Konrad Rzeszutek Wilk
drivers/block/xen-blkback/xenbus.c: In function 'xen_blkbk_discard': drivers/block/xen-blkback/xenbus.c:419:4: warning: passing argument 1 of 'dev_warn' makes pointer from integer without a cast +[enabled by default] include/linux/device.h:894:5: note: expected 'const struct device *' but argument is of type 'long int' It is unclear how that mistake made it in. It surely is wrong. Acked-by: Jens Axboe <axboe@kernel.dk> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-04-18Merge commit 'c104f1fa1ecf4ee0fc06e31b1f77630b2551be81' into ↵Konrad Rzeszutek Wilk
stable/for-linus-3.4 * commit 'c104f1fa1ecf4ee0fc06e31b1f77630b2551be81': (14566 commits) cpufreq: OMAP: fix build errors: depends on ARCH_OMAP2PLUS sparc64: Eliminate obsolete __handle_softirq() function sparc64: Fix bootup crash on sun4v. kconfig: delete last traces of __enabled_ from autoconf.h Revert "kconfig: fix __enabled_ macros definition for invisible and un-selected symbols" kconfig: fix IS_ENABLED to not require all options to be defined irq_domain: fix type mismatch in debugfs output format staging: android: fix mem leaks in __persistent_ram_init() staging: vt6656: Don't leak memory in drivers/staging/vt6656/ioctl.c::private_ioctl() staging: iio: hmc5843: Fix crash in probe function. panic: fix stack dump print on direct call to panic() drivers/rtc/rtc-pl031.c: enable clock on all ST variants Revert "mm: vmscan: fix misused nr_reclaimed in shrink_mem_cgroup_zone()" hugetlb: fix race condition in hugetlb_fault() drivers/rtc/rtc-twl.c: use static register while reading time drivers/rtc/rtc-s3c.c: add placeholder for driver private data drivers/rtc/rtc-s3c.c: fix compilation error MAINTAINERS: add PCDP console maintainer memcg: do not open code accesses to res_counter members drivers/rtc/rtc-efi.c: fix section mismatch warning ...
2012-04-18libata: forbid port runtime pm by default, fixing regressionLin Ming
Forbid port runtime pm by default because it has known hotplug issue. User can allow it by, for example echo auto > /sys/devices/pci0000:00/0000:00:1f.2/ata2/power/control Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-04-18hwmon: (ads1015) Fix build warningGuenter Roeck
The following build warning is seen in some configurations. drivers/hwmon/ads1015.c: In function 'show_in': drivers/hwmon/ads1015.c:129: warning: 'in' may be used uninitialized in this function Fix by separating the register read function from the code converting the result into mV. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Dirk Eibach <eibach@gdsys.de> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2012-04-18hwmon: fam15h_power: fix bogus values with current BIOSesAndre Przywara
Newer BKDG[1] versions recommend a different initialization value for the running average range register in the northbridge. This improves the power reading by avoiding counter saturations resulting in bogus values for anything below about 80% of TDP power consumption. Updated BIOSes will have this new value set up from the beginning, but meanwhile we correct this value ourselves. This needs to be done on all northbridges, even on those where the driver itself does not register at. This fixes the driver on all current machines to provide proper values for idle load. [1] http://support.amd.com/us/Processor_TechDocs/42301_15h_Mod_00h-0Fh_BKDG.pdf Chapter 3.8: D18F5xE0 Processor TDP Running Average (p. 452) Signed-off-by: Andre Przywara <andre.przywara@amd.com> Acked-by: Jean Delvare <khali@linux-fr.org> [guenter.roeck@ericsson.com: Removed unnecessary return statement] Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: stable@vger.kernel.org # 3.0+
2012-04-18Revert "ACPI: Make ACPI interrupt threaded"Thomas Gleixner
This reverts commit 6fe0d0628245fdcd6fad8b837c81e8f7ebc3364d. Paul bisected this regression. The conversion was done blindly and is wrong, as it does not provide a primary handler to disable the level type irq on the device level. Neither does it set the IRQF_ONESHOT flag which handles that at the irq line level. This can't be done as the interrupt might be shared, though we might extend the core to force it. So an interrupt on this line will wake up the thread, but immediately unmask the irq after that. Due to the interrupt being level type the hardware interrupt is raised over and over and prevents the irq thread from handling it. Fail. request_irq() unfortunately does not refuse such a request and the patch was obviously never tested with real interrupts. Bisected-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-18[media] rc-core: set mode for winbond-cirDavid Härdeman
Setting the correct mode is required by rc-core or scancodes won't be generated (which isn't very user-friendly). This one-line fix should be suitable for 3.4-rc2. Signed-off-by: David Härdeman <david@hardeman.nu> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-18[media] drxk: Does not unlock mutex if sanity check failed in scu_command()Alexey Khoroshilov
If sanity check fails in scu_command(), goto error leads to unlock of an unheld mutex. The check should not fail in reality, but it nevertheless worth fixing. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-18[media] dvb_frontend: Fix a regression when switching back to DVB-SMauro Carvalho Chehab
There are some softwares (Kaffeine and likely xine) that uses a DVBv5 call to switch to DVB-S2, but expects that a DVBv3 call to switch back to DVB-S. Well, this is not right, as a DVBv3 call doesn't know anything about delivery systems. However, as, by accident, this used to work, we need to restore its behavior, in order to avoid regressions with those softwares. Reported on this Fedora 16 bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=812895 Reported-by: Dieter Roever <Dieter.Roever@gmx.de> Cc: stable@kernel.org # for version 3.3 Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-18ARM: imx: Fix imx5 idle logic bugRobert Lee
The imx5_idle() check of the tzic_eanble_wake() return value uses incorrect (inverted) logic causing all attempt to idle to fail. Signed-off-by: Robert Lee <rob.lee@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-18ARM: imx27-dt: Fix build due to removal of irq_domain_add_simple()Fabio Estevam
commit 6b783f7c (irq_domain: Remove irq_domain_add_simple() replaced irq_domain_add_simple with irq_domain_add_legacy() Implement this conversion so that imx27-dt can be built again. Reported-by: Chris Ball <cjb@laptop.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-18ARM: imx_v4_v5_defconfig: Add support for CONFIG_REGULATOR_FIXED_VOLTAGEFabio Estevam
Add support for CONFIG_REGULATOR_FIXED_VOLTAGE. Without this option the mx27_3ds cannot have the external Ethernet functional due to the need of smsc regulators. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-18drm/i915: Do not set "Enable Panel Fitter" on SNB pageflipsChris Wilson
Not only do the pageflip work without it at non-native modes (i.e. with the panel fitter enabled), it also causes normal (non-pageflipped) modesets to fail. Reported-by: Adam Jackson <ajax@redhat.com> Tested-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Wanted-by-for-fixes: Dave Airlie <airlied@gmail.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-18ALSA: fix core/vmaster.c kernel-doc warningRandy Dunlap
Fix kernel-doc warning in sound/core/vmaster.c: Warning(sound/core/vmaster.c:429): No description found for parameter 'private_data' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-18fcaps: clear the same personality flags as suid when fcaps are usedEric Paris
If a process increases permissions using fcaps all of the dangerous personality flags which are cleared for suid apps should also be cleared. Thus programs given priviledge with fcaps will continue to have address space randomization enabled even if the parent tried to disable it to make it easier to attack. Signed-off-by: Eric Paris <eparis@redhat.com> Reviewed-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-18mpi: Avoid using freed pointer in mpi_lshift_limbs()Jesper Juhl
At the start of the function we assign 'a->d' to 'ap'. Then we use the RESIZE_IF_NEEDED macro on 'a' - this may free 'a->d' and replace it with newly allocaetd storage. In that case, we'll be operating on freed memory further down in the function when we index into 'ap[]'. Since we don't actually need 'ap' until after the use of the RESIZE_IF_NEEDED macro we can just delay the assignment to it until after we've potentially resized, thus avoiding the issue. While I was there anyway I also changed the integer variable 'n' to be const. It might as well be since we only assign to it once and use it as a constant, and then the compiler will tell us if we ever assign to it in the future. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-18Smack: move label list initializationCasey Schaufler
A kernel with Smack enabled will fail if tmpfs has xattr support. Move the initialization of predefined Smack label list entries to the LSM initialization from the smackfs setup. This became an issue when tmpfs acquired xattr support, but was never correct. Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-17EHCI: fix criterion for resuming the root hubAlan Stern
This patch (as1542) changes the criterion ehci-hcd uses to tell when it needs to resume the controller's root hub. A resume is needed when a port status change is detected, obviously, but only if the root hub is currently suspended. Right now the driver tests whether the root hub is running, and that is not the correct test. In particular, if the controller has died then the root hub should not be restarted. In addition, some buggy hardware occasionally requires the root hub to be running and sending out SOF packets even while it is nominally supposed to be suspended. In the end, the test needs to be changed. Rather than checking whether the root hub is currently running, the driver will now check whether the root hub is currently suspended. This will yield the correct behavior in all cases. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Peter Chen <B29397@freescale.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-17USB: sierra: avoid QMI/wwan interface on MC77xxBjørn Mork
These devices have a number of non serial interfaces as well. Use the existing "Direct IP" blacklist to prevent binding to interfaces which are handled by other drivers. We also extend the "Direct IP" blacklist with with interfaces only seen in "QMI" mode, assuming that these devices use the same interface numbers for serial interfaces both in "Direct IP" and in "QMI" mode. Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-17usb: usbtest: avoid integer overflow in alloc_sglist()Xi Wang
A large `nents' from userspace could overflow the allocation size, leading to memory corruption. | alloc_sglist() | usbtest_ioctl() Use kmalloc_array() to avoid the overflow. Signed-off-by: Xi Wang <xi.wang@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-17usb: usbtest: avoid integer overflow in test_ctrl_queue()Xi Wang
Avoid overflowing context.count = param->sglen * param->iterations, where both `sglen' and `iterations' are from userspace. | test_ctrl_queue() | usbtest_ioctl() Keep -EOPNOTSUPP for error code. Signed-off-by: Xi Wang <xi.wang@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-17USB: fix deadlock in bConfigurationValue attribute methodAlan Stern
This patch (as154) fixes a self-deadlock that occurs when userspace writes to the bConfigurationValue sysfs attribute for a hub with children. The task tries to lock the bandwidth_mutex at a time when it already owns the lock: The attribute's method calls usb_set_configuration(), which calls usb_disable_device() with the bandwidth_mutex held. usb_disable_device() unregisters the existing interfaces, which causes the hub driver to be unbound. The hub_disconnect() routine calls hub_quiesce(), which calls usb_disconnect() for each of the hub's children. usb_disconnect() attempts to acquire the bandwidth_mutex around a call to usb_disable_device(). The solution is to make usb_disable_device() acquire the mutex for itself instead of requiring the caller to hold it. Then the mutex can cover only the bandwidth deallocation operation and not the region where the interfaces are unregistered. This has the potential to change system behavior slightly when a config change races with another config or altsetting change. Some of the bandwidth released from the old config might get claimed by the other config or altsetting, make it impossible to restore the old config in case of a failure. But since we don't try to recover from config-change failures anyway, this doesn't matter. [This should be marked for stable kernels that contain the commit fccf4e86200b8f5edd9a65da26f150e32ba79808 "USB: Free bandwidth when usb_disable_device is called." That commit was marked for stable kernels as old as 2.6.32.] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-17ARM: OMAP1: DMTIMER: fix broken timer clock source selectionPaul Walmsley
DMTIMER source selection on OMAP1 is broken. omap1_dm_timer_set_src() tries to use __raw_{read,write}l() to read from and write to physical addresses, but those functions take virtual addresses. sparse caught this: arch/arm/mach-omap1/timer.c:50:13: warning: incorrect type in argument 1 (different base types) arch/arm/mach-omap1/timer.c:50:13: expected void const volatile [noderef] <asn:2>*<noident> arch/arm/mach-omap1/timer.c:50:13: got unsigned int arch/arm/mach-omap1/timer.c:52:9: warning: incorrect type in argument 1 (different base types) arch/arm/mach-omap1/timer.c:52:9: expected void const volatile [noderef] <asn:2>*<noident> arch/arm/mach-omap1/timer.c:52:9: got unsigned int Fix by using omap_{read,writel}(), just like the other users of the MOD_CONF_CTRL_1 register in the OMAP1 codebase. Of course, in the long term, removing omap_{read,write}l() is the appropriate thing to do; but this will take some work to do this cleanly. Looks like this was caused by 97933d6 (ARM: OMAP1: dmtimer: conversion to platform devices) that dangerously moved code and changed it in the same patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tarun Kanti DebBarma <tarun.kanti@ti.com> Cc: stable@vger.kernel.org [tony@atomide.com: updated comments to include the breaking commit] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-04-17tty: add missing tty_port_tty_get() call to raw3215_wakeupHeiko Carstens
Fix compile error caused by "TTY: con3215, use tty from tty_port": CC drivers/s390/char/con3215.o drivers/s390/char/con3215.c: In function 'raw3215_wakeup': drivers/s390/char/con3215.c:339:16: error: 'struct raw3215_info' has no member named 'tty' make[1]: *** [drivers/s390/char/con3215.o] Error 1 make: *** [drivers/s390/char/] Error 2 Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-17Merge tag 'ext4_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 regression fixes from Ted Ts'o: "This fixes a scalability problem reported by Andi Kleen and Tim Chen; they were quite secretive about the precise nature of their workload, but they later admitted that it only showed up when they were using a large sparse file, so the amount of data I/O that was needed was close to zero. I'm not sure how realistic this is and it's only a regression if you consider changes made since 2.6.39 to be a "regression" vis-a-vis the policy regarding post-merge window bug fixes, but Linus agreed it was worth fixing, so I'm including it in this pull request. This also fixes the journalled quota mount options, which I accidentally broke while I was cleaning up the mount option handling." * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix handling of journalled quota options ext4: address scalability issue by removing extent cache statistics
2012-04-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "A bunch of endianness fixes and a couple of nfsd error value fixes. Speaking of endianness stuff, I'm rather tempted to slap ccflags-y += -D__CHECK_ENDIAN__ in fs/Makefile, if not making it default for the entire tree; nfsd regressions I've caught make one hell of a pile and we'd obviously benefit from having that kind of stuff caught earlier..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: lockd: fix the endianness bug ocfs2: ->e_leaf_clusters endianness breakage ocfs2: ->rl_count endianness breakage ocfs: ->rl_used breakage on big-endian ocfs2: ->l_next_free_req breakage on big-endian btrfs: btrfs_root_readonly() broken on big-endian ext4: fix endianness breakage in ext4_split_extent_at() nfsd: fix compose_entry_fh() failure exits nfsd: fix error value on allocation failure in nfsd4_decode_test_stateid() nfsd: fix endianness breakage in TEST_STATEID handling nfsd: fix error values returned by nfsd4_lockt() when nfsd_open() fails nfsd: fix b0rken error value for setattr on read-only mount
2012-04-17ARM: OMAP: serial: Fix the ocp smart idlemode handling bugSantosh Shilimkar
The current serial UART code, while fidling with ocp idlemode bits, forget about the smart idle wakeup bit even if it is supported by UART IP block. This will lead to missing the module wakeup on OMAP's where the smart idle wakeup is supported. This was the root cause of the console sluggishness issue, I have been observing on OMAP4 devices and also can be potential reason for some other UART wakeup issues. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@ti.com> Acked-by: Govindraj.R <govindraj.raja@ti.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-04-17ARM: OMAP2+: UART: Fix incorrect population of default uart padsGovindraj.R
Commit (7496ba3 ARM: OMAP2+: UART: Add default mux for all uarts) wrongly added muxing of default pads for all uarts. This causes breakage on multiple boards using uart pins for alternate functions. For example, on zoom3 random oopses can be seen with nfsroot as the smsc911x ethernet FIFO timings on GPMC bus are controlled by gpmc_wait2 and gpmc_wait3 pins. This means we can't mux these pads to uart4 functionality as commit 7496ba3 was doing. Not all boards tend to use all uarts and most of unused uart pins are muxed for other purpose. This commit breaks the modules which where trying to use unused uart pins on their boards. So remove the default pad muxing. Note that this is not a complete fix, as we now rely on bootloader set muxing for the uart wake-up events. Further patching is needed to enable wake-up events for uarts that are already muxed to uart mode. Cc: Felipe Balbi <balbi@ti.com> Cc: Kevin Hilman <khilman@ti.com> Acked-by: Russ Dill <russ.dill@gmail.com> Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Govindraj.R <govindraj.raja@ti.com> [tony@atomide.com: updated comments to describe oops on zoom3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-04-17xen/p2m: m2p_find_override: use list_for_each_entry_safeStefano Stabellini
Use list_for_each_entry_safe and remove the spin_lock acquisition in m2p_find_override. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-04-17xen/gntdev: do not set VM_PFNMAPStefano Stabellini
Since we are using the m2p_override we do have struct pages corresponding to the user vma mmap'ed by gntdev. Removing the VM_PFNMAP flag makes get_user_pages work on that vma. An example test case would be using a Xen userspace block backend (QDISK) on a file on NFS using O_DIRECT. CC: stable@kernel.org Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-04-17ARM: OMAP: sram: fix BUG in dpll code for !PM caseGrazvydas Ignotas
_omap3_sram_configure_core_dpll is called when SDRC is reprogrammed, which is done regardless of CONFIG_PM setting, so we always need it's setup code too. Without this, we hit a BUG() on OMAP3 when kernel is built without CONFIG_PM: Reprogramming SDRC clock to 332000000 Hz ------------[ cut here ]------------ kernel BUG at arch/arm/plat-omap/sram.c:342! Internal error: Oops - BUG: 0 [#1] ARM ... [<c001c694>] (omap3_configure_core_dpll+0x68/0x6c) from [<c001b2dc>] (omap3_core_dpll_m2_set_rate+0x1) [<c001b2dc>] (omap3_core_dpll_m2_set_rate+0x138/0x1b0) from [<c001a478>] (omap2_clk_set_rate+0x14/0x2) [<c001a478>] (omap2_clk_set_rate+0x14/0x20) from [<c001c9dc>] (clk_set_rate+0x54/0x74) [<c001c9dc>] (clk_set_rate+0x54/0x74) from [<c022b9c8>] (omap_sdrc_init+0x70/0x90) [<c022b9c8>] (omap_sdrc_init+0x70/0x90) from [<c022f178>] (omap3pandora_init+0x11c/0x164) [<c022f178>] (omap3pandora_init+0x11c/0x164) from [<c022849c>] (customize_machine+0x20/0x28) [<c022849c>] (customize_machine+0x20/0x28) from [<c0225810>] (do_one_initcall+0xa0/0x16c) [<c0225810>] (do_one_initcall+0xa0/0x16c) from [<c02259e0>] (kernel_init+0x104/0x1ac) [<c02259e0>] (kernel_init+0x104/0x1ac) from [<c0009cec>] (kernel_thread_exit+0x0/0x8) Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-04-17Merge git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull CIFS fixes from Steve French. * git://git.samba.org/sfrench/cifs-2.6: Fix number parsing in cifs_parse_mount_options Cleanup handling of NULL value passed for a mount option
2012-04-17dmaengine: Kconfig: fix Atmel at_hdmac entryNicolas Ferre
Remove SoC dependency and make it generic for every Atmel ARM AT91. That will allow to select this driver for newer chips. Keep dependency on AT91 because of the use of an header file located in include/mach directory. Modify the comment to reflect this. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-04-17USB: gadget/at91_udc: add gpio_to_irq() function to vbus interruptNicolas Ferre
Now that we are using irqdomains, we need to convert GPIO pins to Linux IRQ numbers using the gpio_to_irq() function. This call is added to request/free_irq calls. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: linux-usb@vger.kernel.org
2012-04-17USB: ohci-at91: change annotations for probe/remove functionsNicolas Ferre
Add __devinit and __devexit on *_probe() and *_remove() functions with proper modification of struct platform_driver. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: linux-usb@vger.kernel.org
generated by cgit (git 2.34.1) at 2025-07-16 01:32:35 +0000