| Age | Commit message (Collapse) | Author |
|---|
|
Charlie Jenkins <charlie@rivosinc.com> says:
On riscv, mmap currently returns an address from the largest address
space that can fit entirely inside of the hint address. This makes it
such that the hint address is almost never returned. This patch raises
the mappable area up to and including the hint address. This allows mmap
to often return the hint address, which allows a performance improvement
over searching for a valid address as well as making the behavior more
similar to other architectures.
Note that a previous patch introduced stronger semantics compared to
other architectures for riscv mmap. On riscv, mmap will not use bits in
the upper bits of the virtual address depending on the hint address. On
other architectures, a random address is returned in the address space
requested. On all architectures the hint address will be returned if it
is available. This allows riscv applications to configure how many bits
in the virtual address should be left empty. This has the two benefits
of being able to request address spaces that are smaller than the
default and doesn't require the application to know the page table
layout of riscv.
* b4-shazam-merge:
docs: riscv: Define behavior of mmap
selftests: riscv: Generalize mm selftests
riscv: mm: Use hint address in mmap if available
Link: https://lore.kernel.org/r/20240130-use_mmap_hint_address-v3-0-8a655cfa8bcb@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Eric Chan <ericchancf@google.com> says:
This series makes barrier-related macro more neat and clear.
This is a follow-up to [0-3], change to multiple patches,
for readability, create new message thread.
[0](v1/v2) https://lore.kernel.org/lkml/20240209125048.4078639-1-ericchancf@google.com/
[1] (v3) https://lore.kernel.org/lkml/20240213142856.2416073-1-ericchancf@google.com/
[2] (v4) https://lore.kernel.org/lkml/20240213200923.2547570-1-ericchancf@google.com/
[4] (v5) https://lore.kernel.org/lkml/20240213223810.2595804-1-ericchancf@google.com/
* b4-shazam-merge:
riscv/barrier: Add missing space after ','
riscv/barrier: Consolidate fence definitions
riscv/barrier: Define RISCV_FULL_BARRIER
riscv/barrier: Define __{mb,rmb,wmb}
Link: https://lore.kernel.org/r/20240217131206.3667544-1-ericchancf@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add an implementation of cts(cbc(aes)) accelerated using the Zvkned
RISC-V vector crypto extension. This is mainly useful for fscrypt,
where cts(cbc(aes)) is the "default" filenames encryption algorithm. In
that use case, typically most messages are short and are block-aligned.
The CBC-CTS variant implemented is CS3; this is the variant Linux uses.
To perform well on short messages, the new implementation processes the
full message in one call to the assembly function if the data is
contiguous. Otherwise it falls back to CBC operations followed by CTS
at the end. For decryption, to further improve performance on short
messages, especially block-aligned messages, the CBC-CTS assembly
function parallelizes the AES decryption of all full blocks. This
improves on the arm64 implementation of cts(cbc(aes)), which always
splits the CBC part(s) from the CTS part, doing the AES decryptions for
the last two blocks serially and usually loading the round keys twice.
Tested in QEMU with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240213055442.35954-1-ebiggers@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Since CBC decryption is parallelizable, make the RISC-V implementation
of AES-CBC decryption process multiple blocks at a time, instead of
processing the blocks one by one. This should improve performance.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240208060851.154129-1-ebiggers@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Sunil V L <sunilvl@ventanamicro.com> says:
This series enables the support for "Collaborative Processor Performance
Control (CPPC) on ACPI based RISC-V platforms. It depends on the
encoding of CPPC registers as defined in RISC-V FFH spec [2].
CPPC is described in the ACPI spec [1]. RISC-V FFH spec required to
enable this, is available at [2].
[1] - https://uefi.org/specs/ACPI/6.5/08_Processor_Configuration_and_Control.html#collaborative-processor-performance-control
[2] - https://github.com/riscv-non-isa/riscv-acpi-ffh/releases/download/v1.0.0/riscv-ffh.pdf
* b4-shazam-merge:
RISC-V: defconfig: Enable CONFIG_ACPI_CPPC_CPUFREQ
cpufreq: Move CPPC configs to common Kconfig and add RISC-V
ACPI: RISC-V: Add CPPC driver
Link: https://lore.kernel.org/r/20240208034414.22579-1-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
We used to emit a flush_icache_all() whenever a dirty executable
mapping is set in the page table but we can instead call
flush_icache_mm() which will only send IPIs to cores that currently run
this mm and add a deferred icache flush to the others.
The number of calls to sbi_remote_fence_i() (tested without IPI
support):
With a simple buildroot rootfs:
* Before: ~5k
* After : 4 (!)
Tested on HW, the boot to login is ~4.5% faster.
With an ubuntu rootfs:
* Before: ~24k
* After : ~13k
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240202124711.256146-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, use the purpose specific kcalloc() function instead of the argument
count * size in the kzalloc() function.
Also, it is preferred to use sizeof(*pointer) instead of sizeof(type)
due to the type of the variable can change and one needs not change the
former (unlike the latter).
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240120135400.4710-1-erick.archer@gmx.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Sunil V L <sunilvl@ventanamicro.com> says:
This series adds support for Low Power Idle (LPI) on ACPI based
platforms.
LPI is described in the ACPI spec [1]. RISC-V FFH spec required to
enable this is available at [2].
[1] - https://uefi.org/specs/ACPI/6.5/08_Processor_Configuration_and_Control.html#lpi-low-power-idle-states
[2] - https://github.com/riscv-non-isa/riscv-acpi-ffh/releases/download/v/riscv-ffh.pdf
* b4-shazam-merge:
ACPI: Enable ACPI_PROCESSOR for RISC-V
ACPI: RISC-V: Add LPI driver
cpuidle: RISC-V: Move few functions to arch/riscv
Link: https://lore.kernel.org/r/20240118062930.245937-1-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
arch_get_mmap_end()"
Leonardo Bras <leobras@redhat.com> says:
I just saw the opportunity of optimizing the helper is_compat_task() by
introducing a compile-time test, and it made possible to remove some
#ifdef's without any loss of performance.
I also saw the possibility of removing the direct check of task flags from
general code, and concentrated it in asm/compat.h by creating a few more
helpers, which in the end helped optimize code.
arch_get_mmap_end() just got a simple improvement and some extra docs.
* b4-shazam-merge:
riscv: Introduce set_compat_task() in asm/compat.h
riscv: Introduce is_compat_thread() into compat.h
riscv: add compile-time test into is_compat_task()
riscv: Replace direct thread flag check with is_compat_task()
riscv: Improve arch_get_mmap_end() macro
Link: https://lore.kernel.org/r/20240103160024.70305-2-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Subbaraya Sundeep says:
====================
octeontx2-pf: RVU Mailbox fixes
This patchset fixes the problems related to RVU mailbox.
During long run tests some times VF commands like setting
MTU or toggling interface fails because VF mailbox is timedout
waiting for response from PF.
Below are the fixes
Patch 1: There are two types of messages in RVU mailbox namely up and down
messages. Down messages are synchronous messages where a PF/VF sends
a message to AF and AF replies back with response. UP messages are
notifications and are asynchronous like AF sending link events to
PF. When VF sends a down message to PF, PF forwards to AF and sends
the response from AF back to VF. PF has to forward VF messages since
there is no path in hardware for VF to send directly to AF.
There is one mailbox interrupt from AF to PF when raised could mean
two scenarios one is where AF sending reply to PF for a down message
sent by PF and another one is AF sending up message asynchronously
when link changed for that PF. Receiving the up message interrupt while
PF is in middle of forwarding down message causes mailbox errors.
Fix this by receiver detecting the type of message from the mbox data register
set by sender.
Patch 2:
During VF driver remove, VF has to wait until last message is
completed and then turn off mailbox interrupts from PF.
Patch 3:
Do not use ordered workqueue for message processing since multiple works are
queued simultaneously by all the VFs and PF link UP messages.
Patch 4:
When sending link event to VF by PF check whether VF is really up to
receive this message.
Patch 5:
In AF driver, use separate interrupt handlers for the AF-VF interrupt and
AF-PF interrupt. Sometimes both interrupts are raised to two CPUs at same
time and both CPUs execute same function at same time corrupting the data.
v2 changes:
Added missing mutex unlock in error path in patch 1
Refactored if else logic in patch 1 as suggested by Paolo Abeni
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For PF to AF interrupt vector and VF to AF vector same
interrupt handler is registered which is causing race condition.
When two interrupts are raised to two CPUs at same time
then two cores serve same event corrupting the data.
Fixes: 7304ac4567bc ("octeontx2-af: Add mailbox IRQ and msg handlers")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When PF sending link status messages to VF, it is possible
that by the time link_event_task work function is executed
VF might have brought down. Hence before sending VF link
status message check whether VF is up to receive it.
Fixes: ad513ed938c9 ("octeontx2-vf: Link event notification support")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Only one execution context for the workqueue used for PF and
VFs mailbox communication is incorrect since multiple works are
queued simultaneously by all the VFs and PF link UP messages.
Hence use default number of execution contexts by passing zero
as max_active to alloc_workqueue function. With this fix in place,
modify UP messages also to wait until completion.
Fixes: d424b6c02415 ("octeontx2-pf: Enable SRIOV and added VF mbox handling")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During VF driver remove, a message is sent to detach VF
resources to PF but VF is not waiting until message is
complete. Also mailbox interrupts need to be turned off
after the detach resource message is complete. This patch
fixes that problem.
Fixes: 05fcc9e08955 ("octeontx2-pf: Attach NIX and NPA block LFs")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A single line of interrupt is used to receive up notifications
and down reply messages from AF to PF (similarly from PF to its VF).
PF acts as bridge and forwards VF messages to AF and sends respsones
back from AF to VF. When an async event like link event is received
by up message when PF is in middle of forwarding VF message then
mailbox errors occur because PF state machine is corrupted.
Since VF is a separate driver or VF driver can be in a VM it is
not possible to serialize from the start of communication at VF.
Hence to differentiate between type of messages at PF this patch makes
sender to set mbox data register with distinct values for up and down
messages. Sender also checks whether previous interrupt is received
before triggering current interrupt by waiting for mailbox data register
to become zero.
Fixes: 5a6d7c9daef3 ("octeontx2-pf: Mailbox communication with AF")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The OV7251 sensor only has a single data lane, so 2 entries is not valid.
Fix this to be 1 entry as the schema specifies.
The schema validation doesn't catch this currently due to some limitations
in handling of arrays vs. matrices, but a fix is being worked on.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Some hardware designs with multiple PCA954x devices use a reset GPIO
connected to all the muxes. Support this configuration by making use of
the reset controller framework which can deal with the shared reset
GPIOs. Fall back to the old GPIO descriptor method if the reset
controller framework is not enabled.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
Théo adds support for the Mobileye EyeQ5-I2C in the bindings.
This patch is followed by eight commits featuring improvements to
the Nomadik controller, such as simplification of the IRQ logic,
renaming of the private data structure, more efficient use of
FIELD_PREP/GET, GENMASK, etc., better time measurement with
ktime, and more.
|
|
The recent conversion to the automatic kfree() forgot to mark a
variable with __free(kfree), leading to memory leaks. Fix it.
Fixes: 1052d9882269 ("ALSA: control: Use automatic cleanup of kfree()")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/r/c1e2ef3c-164f-4840-9b1c-f7ca07ca422a@alu.unizg.hr
Message-ID: <20240320062722.31325-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add audio quirks to fix speaker output and headset detection on some new
Clevo models:
- L240TU (ALC245)
- PE60SNE-G (ALC1220)
- V350SNEQ (ALC245)
Co-authored-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Message-ID: <20240319212726.62888-1-tcrawford@system76.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The timerlat tracer provides an interface for any application to wait
for the timerlat's periodic wakeup. Currently, rtla timerlat uses it
to dispatch its user-space workload (-u option).
But as the tracer interface is generic, rtla timerlat can also be used
to monitor any workload that uses it. For example, a user might
place their own workload to wait on the tracer interface, and
monitor the results with rtla timerlat.
Add the -U option to rtla timerlat top and hist. With this option, rtla
timerlat will not dispatch its workload but only setting up the
system, waiting for a user to dispatch its workload.
The sample code in this patch is an example of python application
that loops in the timerlat tracer fd.
To use it, dispatch:
# rtla timerlat -U
In a terminal, then run the python program on another terminal,
specifying the CPU to run it. For example, setting on CPU 1:
#./timerlat_load.py 1
Then rtla timerlat will start printing the statistics of the
./timerlat_load.py app.
An interesting point is that the "Ret user Timer Latency" value
is the overall response time of the load. The sample load does
a memory copy to exemplify that.
The stop tracing options on rtla timerlat works in this setup
as well, including auto analysis.
Link: https://lkml.kernel.org/r/36e6bcf18fe15c7601048fd4c65aeb193c502cc8.1707229706.git.bristot@kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
|
|
Use tools/build/ makefiles to build rv, inheriting the benefits of
it. For example, having a proper way to handle dependencies.
Link: https://lkml.kernel.org/r/2a38a8f7b8dc65fa790381ec9ab42fb62beb2e25.1710519524.git.bristot@kernel.org
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
|
|
Use tools/build/ makefiles to build rtla, inheriting the benefits of
it. For example, having a proper way to handle dependencies.
rtla is built using perf infra-structure when building inside the
kernel tree.
At this point, rtla diverges from perf in two points: Documentation
and tarball generation/build.
At the documentation level, rtla is one step ahead, placing the
documentation at Documentation/tools/rtla/, using the same build
tools as kernel documentation. The idea is to move perf
documentation to the same scheme and then share the same makefiles.
rtla has a tarball target that the (old) RHEL8 uses. The tarball was
kept using a simple standalone makefile for compatibility. The
standalone makefile shares most of the code, e.g., flags, with
regular buildings.
The tarball method was set as deprecated. If necessary, we can make
a rtla tarball like perf, which includes the entire tools/build.
But this would also require changes in the user side (the directory
structure changes, and probably the deps to build the package).
Inspired on perf and objtool.
Link: https://lkml.kernel.org/r/57563abf2715d22515c0c54a87cff3849eca5d52.1710519524.git.bristot@kernel.org
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
|
|
Use tools/build/ makefiles to build latency-collector, inheriting
the benefits of it. For example: Before this patch, a missing
tracefs/traceevents headers will result in fail like this:
~/linux/tools/tracing/latency $ make
cc -Wall -Wextra -g -O2 -o latency-collector latency-collector.c -lpthread
latency-collector.c:26:10: fatal error: tracefs.h: No such file or directory
26 | #include <tracefs.h>
| ^~~~~~~~~~~
compilation terminated.
make: *** [Makefile:14: latency-collector] Error 1
Which is not that helpful. After this change it reports:
~/linux/tools/tracing/latency# make
Auto-detecting system features:
... libtraceevent: [ OFF ]
... libtracefs: [ OFF ]
libtraceevent is missing. Please install libtraceevent-dev/libtraceevent-devel
libtracefs is missing. Please install libtracefs-dev/libtracefs-devel
Makefile.config:29: *** Please, check the errors above.. Stop.
This type of output is common across other tools in tools/ like perf
and objtool.
Link: https://lkml.kernel.org/r/872420b0880b11304e4ba144a0086c6478c5b469.1710519524.git.bristot@kernel.org
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2024-03-19
1) Fix possible page_pool leak triggered by esp_output.
From Dragos Tatulea.
2) Fix UDP encapsulation in software GSO path.
From Leon Romanovsky.
* tag 'ipsec-2024-03-19' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Allow UDP encapsulation only in offload modes
net: esp: fix bad handling of pages from page_pool
====================
Link: https://lore.kernel.org/r/20240319110151.409825-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Due to a c&p error, port new reply fills-up cmd with wrong value,
any other existing port command replies and notifications.
Fix it by filling cmd with value DEVLINK_CMD_PORT_NEW.
Skimmed through devlink userspace implementations, none of them cares
about this cmd value.
Reported-by: Chenyuan Yang <chenyuan0y@gmail.com>
Closes: https://lore.kernel.org/all/ZfZcDxGV3tSy4qsV@cy-server/
Fixes: cd76dcd68d96 ("devlink: Support add and delete devlink port")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20240318091908.2736542-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzkaller reported a read of uninit req->syncookie. [0]
Originally, req->syncookie was used only in tcp_conn_request()
to indicate if we need to encode SYN cookie in SYN+ACK, so the
field remains uninitialised in other places.
The commit 695751e31a63 ("bpf: tcp: Handle BPF SYN Cookie in
cookie_v[46]_check().") added another meaning in ACK path;
req->syncookie is set true if SYN cookie is validated by BPF
kfunc.
After the change, cookie_v[46]_check() always read req->syncookie,
but it is not initialised in the normal SYN cookie case as reported
by KMSAN.
Let's make sure we always initialise req->syncookie in reqsk_alloc().
[0]:
BUG: KMSAN: uninit-value in cookie_v4_check+0x22b7/0x29e0
net/ipv4/syncookies.c:477
cookie_v4_check+0x22b7/0x29e0 net/ipv4/syncookies.c:477
tcp_v4_cookie_check net/ipv4/tcp_ipv4.c:1855 [inline]
tcp_v4_do_rcv+0xb17/0x10b0 net/ipv4/tcp_ipv4.c:1914
tcp_v4_rcv+0x4ce4/0x5420 net/ipv4/tcp_ipv4.c:2322
ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x332/0x500 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:460 [inline]
ip_rcv_finish+0x4a2/0x520 net/ipv4/ip_input.c:449
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_rcv+0xcd/0x380 net/ipv4/ip_input.c:569
__netif_receive_skb_one_core net/core/dev.c:5538 [inline]
__netif_receive_skb+0x319/0x9e0 net/core/dev.c:5652
process_backlog+0x480/0x8b0 net/core/dev.c:5981
__napi_poll+0xe7/0x980 net/core/dev.c:6632
napi_poll net/core/dev.c:6701 [inline]
net_rx_action+0x89d/0x1820 net/core/dev.c:6813
__do_softirq+0x1c0/0x7d7 kernel/softirq.c:554
do_softirq+0x9a/0x100 kernel/softirq.c:455
__local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:382
local_bh_enable include/linux/bottom_half.h:33 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:820 [inline]
__dev_queue_xmit+0x2776/0x52c0 net/core/dev.c:4362
dev_queue_xmit include/linux/netdevice.h:3091 [inline]
neigh_hh_output include/net/neighbour.h:526 [inline]
neigh_output include/net/neighbour.h:540 [inline]
ip_finish_output2+0x187a/0x1b70 net/ipv4/ip_output.c:235
__ip_finish_output+0x287/0x810
ip_finish_output+0x4b/0x550 net/ipv4/ip_output.c:323
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip_output+0x15f/0x3f0 net/ipv4/ip_output.c:433
dst_output include/net/dst.h:450 [inline]
ip_local_out net/ipv4/ip_output.c:129 [inline]
__ip_queue_xmit+0x1e93/0x2030 net/ipv4/ip_output.c:535
ip_queue_xmit+0x60/0x80 net/ipv4/ip_output.c:549
__tcp_transmit_skb+0x3c70/0x4890 net/ipv4/tcp_output.c:1462
tcp_transmit_skb net/ipv4/tcp_output.c:1480 [inline]
tcp_write_xmit+0x3ee1/0x8900 net/ipv4/tcp_output.c:2792
__tcp_push_pending_frames net/ipv4/tcp_output.c:2977 [inline]
tcp_send_fin+0xa90/0x12e0 net/ipv4/tcp_output.c:3578
tcp_shutdown+0x198/0x1f0 net/ipv4/tcp.c:2716
inet_shutdown+0x33f/0x5b0 net/ipv4/af_inet.c:923
__sys_shutdown_sock net/socket.c:2425 [inline]
__sys_shutdown net/socket.c:2437 [inline]
__do_sys_shutdown net/socket.c:2445 [inline]
__se_sys_shutdown+0x2a4/0x440 net/socket.c:2443
__x64_sys_shutdown+0x6c/0xa0 net/socket.c:2443
do_syscall_64+0xd5/0x1f0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
Uninit was stored to memory at:
reqsk_alloc include/net/request_sock.h:148 [inline]
inet_reqsk_alloc+0x651/0x7a0 net/ipv4/tcp_input.c:6978
cookie_tcp_reqsk_alloc+0xd4/0x900 net/ipv4/syncookies.c:328
cookie_tcp_check net/ipv4/syncookies.c:388 [inline]
cookie_v4_check+0x289f/0x29e0 net/ipv4/syncookies.c:420
tcp_v4_cookie_check net/ipv4/tcp_ipv4.c:1855 [inline]
tcp_v4_do_rcv+0xb17/0x10b0 net/ipv4/tcp_ipv4.c:1914
tcp_v4_rcv+0x4ce4/0x5420 net/ipv4/tcp_ipv4.c:2322
ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x332/0x500 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:460 [inline]
ip_rcv_finish+0x4a2/0x520 net/ipv4/ip_input.c:449
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_rcv+0xcd/0x380 net/ipv4/ip_input.c:569
__netif_receive_skb_one_core net/core/dev.c:5538 [inline]
__netif_receive_skb+0x319/0x9e0 net/core/dev.c:5652
process_backlog+0x480/0x8b0 net/core/dev.c:5981
__napi_poll+0xe7/0x980 net/core/dev.c:6632
napi_poll net/core/dev.c:6701 [inline]
net_rx_action+0x89d/0x1820 net/core/dev.c:6813
__do_softirq+0x1c0/0x7d7 kernel/softirq.c:554
Uninit was created at:
__alloc_pages+0x9a7/0xe00 mm/page_alloc.c:4592
__alloc_pages_node include/linux/gfp.h:238 [inline]
alloc_pages_node include/linux/gfp.h:261 [inline]
alloc_slab_page mm/slub.c:2175 [inline]
allocate_slab mm/slub.c:2338 [inline]
new_slab+0x2de/0x1400 mm/slub.c:2391
___slab_alloc+0x1184/0x33d0 mm/slub.c:3525
__slab_alloc mm/slub.c:3610 [inline]
__slab_alloc_node mm/slub.c:3663 [inline]
slab_alloc_node mm/slub.c:3835 [inline]
kmem_cache_alloc+0x6d3/0xbe0 mm/slub.c:3852
reqsk_alloc include/net/request_sock.h:131 [inline]
inet_reqsk_alloc+0x66/0x7a0 net/ipv4/tcp_input.c:6978
tcp_conn_request+0x484/0x44e0 net/ipv4/tcp_input.c:7135
tcp_v4_conn_request+0x16f/0x1d0 net/ipv4/tcp_ipv4.c:1716
tcp_rcv_state_process+0x2e5/0x4bb0 net/ipv4/tcp_input.c:6655
tcp_v4_do_rcv+0xbfd/0x10b0 net/ipv4/tcp_ipv4.c:1929
tcp_v4_rcv+0x4ce4/0x5420 net/ipv4/tcp_ipv4.c:2322
ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x332/0x500 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:460 [inline]
ip_sublist_rcv_finish net/ipv4/ip_input.c:580 [inline]
ip_list_rcv_finish net/ipv4/ip_input.c:631 [inline]
ip_sublist_rcv+0x15f3/0x17f0 net/ipv4/ip_input.c:639
ip_list_rcv+0x9ef/0xa40 net/ipv4/ip_input.c:674
__netif_receive_skb_list_ptype net/core/dev.c:5581 [inline]
__netif_receive_skb_list_core+0x15c5/0x1670 net/core/dev.c:5629
__netif_receive_skb_list net/core/dev.c:5681 [inline]
netif_receive_skb_list_internal+0x106c/0x16f0 net/core/dev.c:5773
gro_normal_list include/net/gro.h:438 [inline]
napi_complete_done+0x425/0x880 net/core/dev.c:6113
virtqueue_napi_complete drivers/net/virtio_net.c:465 [inline]
virtnet_poll+0x149d/0x2240 drivers/net/virtio_net.c:2211
__napi_poll+0xe7/0x980 net/core/dev.c:6632
napi_poll net/core/dev.c:6701 [inline]
net_rx_action+0x89d/0x1820 net/core/dev.c:6813
__do_softirq+0x1c0/0x7d7 kernel/softirq.c:554
CPU: 0 PID: 16792 Comm: syz-executor.2 Not tainted 6.8.0-syzkaller-05562-g61387b8dcf1d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
Fixes: 695751e31a63 ("bpf: tcp: Handle BPF SYN Cookie in cookie_v[46]_check().")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Closes: https://lore.kernel.org/bpf/CANn89iKdN9c+C_2JAUbc+VY3DDQjAQukMtiBbormAmAk9CdvQA@mail.gmail.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240315224710.55209-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix race condition leading to system crash during EEH error handling
During EEH error recovery, the bnx2x driver's transmit timeout logic
could cause a race condition when handling reset tasks. The
bnx2x_tx_timeout() schedules reset tasks via bnx2x_sp_rtnl_task(),
which ultimately leads to bnx2x_nic_unload(). In bnx2x_nic_unload()
SGEs are freed using bnx2x_free_rx_sge_range(). However, this could
overlap with the EEH driver's attempt to reset the device using
bnx2x_io_slot_reset(), which also tries to free SGEs. This race
condition can result in system crashes due to accessing freed memory
locations in bnx2x_free_rx_sge()
799 static inline void bnx2x_free_rx_sge(struct bnx2x *bp,
800 struct bnx2x_fastpath *fp, u16 index)
801 {
802 struct sw_rx_page *sw_buf = &fp->rx_page_ring[index];
803 struct page *page = sw_buf->page;
....
where sw_buf was set to NULL after the call to dma_unmap_page()
by the preceding thread.
EEH: Beginning: 'slot_reset'
PCI 0011:01:00.0#10000: EEH: Invoking bnx2x->slot_reset()
bnx2x: [bnx2x_io_slot_reset:14228(eth1)]IO slot reset initializing...
bnx2x 0011:01:00.0: enabling device (0140 -> 0142)
bnx2x: [bnx2x_io_slot_reset:14244(eth1)]IO slot reset --> driver unload
Kernel attempted to read user page (0) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000000
Faulting instruction address: 0xc0080000025065fc
Oops: Kernel access of bad area, sig: 11 [#1]
.....
Call Trace:
[c000000003c67a20] [c00800000250658c] bnx2x_io_slot_reset+0x204/0x610 [bnx2x] (unreliable)
[c000000003c67af0] [c0000000000518a8] eeh_report_reset+0xb8/0xf0
[c000000003c67b60] [c000000000052130] eeh_pe_report+0x180/0x550
[c000000003c67c70] [c00000000005318c] eeh_handle_normal_event+0x84c/0xa60
[c000000003c67d50] [c000000000053a84] eeh_event_handler+0xf4/0x170
[c000000003c67da0] [c000000000194c58] kthread+0x1c8/0x1d0
[c000000003c67e10] [c00000000000cf64] ret_from_kernel_thread+0x5c/0x64
To solve this issue, we need to verify page pool allocations before
freeing.
Fixes: 4cace675d687 ("bnx2x: Alloc 4k fragment for each rx ring buffer element")
Signed-off-by: Thinh Tran <thinhtr@linux.ibm.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240315205535.1321-1-thinhtr@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The past form of RISCV_FENCE would cause checkpatch.pl to issue
error messages, the example is as follows:
ERROR: space required after that ',' (ctx:VxV)
26: FILE: arch/riscv/include/asm/barrier.h:27:
+#define __smp_mb() RISCV_FENCE(rw,rw)
^
fix the remaining of RISCV_FENCE.
Signed-off-by: Eric Chan <ericchancf@google.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240217131328.3669364-1-ericchancf@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Disparate fence implementations are consolidated into fence.h.
Also introduce RISCV_FENCE_ASM to make fence macro more reusable.
Signed-off-by: Eric Chan <ericchancf@google.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240217131316.3668927-1-ericchancf@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Introduce RISCV_FULL_BARRIER and use in arch_atomic* function.
like RISCV_ACQUIRE_BARRIER and RISCV_RELEASE_BARRIER, the fence
instruction can be eliminated When SMP is not enabled.
Signed-off-by: Eric Chan <ericchancf@google.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240217131302.3668481-1-ericchancf@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Introduce __{mb,rmb,wmb}, and rely on the generic definitions for
{mb,rmb,wmb}. Although KCSAN is not supported yet, the definitions can
be made more consistent with generic instrumentation. Also add a space
to make the changes pass check by checkpatch.pl.
Without the space, the error message is as below:
ERROR: space required after that ',' (ctx:VxV)
26: FILE: arch/riscv/include/asm/barrier.h:23:
+#define __mb() RISCV_FENCE(iorw,iorw)
^
Signed-off-by: Eric Chan <ericchancf@google.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240217131249.3668103-1-ericchancf@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
CONFIG_ACPI_CPPC_CPUFREQ is required to enable CPPC for RISC-V.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240208034414.22579-4-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
CPPC related config options are currently defined only in ARM specific
file. However, they are required for RISC-V as well. Instead of creating
a new Kconfig.riscv file and duplicating them, move them to the common
Kconfig file and enable RISC-V too.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240208034414.22579-3-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add cpufreq driver based on ACPI CPPC for RISC-V. The driver uses either
SBI CPPC interfaces or the CSRs to access the CPPC registers as defined
by the RISC-V FFH spec.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240208034414.22579-2-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The ACPI processor driver is not currently enabled for RISC-V.
This is required to enable CPU related functionalities like
LPI and CPPC. Hence, enable ACPI_PROCESSOR for RISC-V.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20240118062930.245937-4-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Enable Low Power Idle (LPI) based cpuidle driver for RISC-V platforms.
It depends on SBI HSM calls for idle state transitions.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20240118062930.245937-3-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
To support ACPI Low Power Idle (LPI), few functions are required which
are currently static functions in the DT based cpuidle driver. Hence,
move them under arch/riscv so that ACPI driver also can use them. Since
they are no longer static functions, append "riscv_" prefix to the
function name.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20240118062930.245937-2-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Pull bcachefs fixes from Kent Overstreet:
"Assorted bugfixes.
Most are fixes for simple assertion pops; the most significant fix is
for a deadlock in recovery when we have to rewrite large numbers of
btree nodes to fix errors. This was incorrectly running out of the
same workqueue as the core interior btree update path - we now give it
its own single threaded workqueue.
This was visible to users as "bch2_btree_update_start(): error:
BCH_ERR_journal_reclaim_would_deadlock" - and then recovery hanging"
* tag 'bcachefs-2024-03-19' of https://evilpiepirate.org/git/bcachefs:
bcachefs: Fix lost wakeup on journal shutdown
bcachefs; Fix deadlock in bch2_btree_update_start()
bcachefs: ratelimit errors from async_btree_node_rewrite
bcachefs: Run check_topology() first
bcachefs: Improve bch2_fatal_error()
bcachefs: Fix lost transaction restart error
bcachefs: Don't corrupt journal keys gap buffer when dropping alloc info
bcachefs: fix for building in userspace
bcachefs: bch2_snapshot_is_ancestor() now safe to call in early recovery
bcachefs: Fix nested transaction restart handling in bch2_bucket_gens_init()
bcachefs: Improve sysfs internal/btree_updates
bcachefs: Split out btree_node_rewrite_worker
bcachefs: Fix locking in bch2_alloc_write_key()
bcachefs: Avoid extent entry type assertions in .invalid()
bcachefs: Fix spurious -BCH_ERR_transaction_restart_nested
bcachefs: Fix check_key_has_snapshot() call
bcachefs: Change "accounting overran journal reservation" to a warning
|
|
In order to have all task compat bit access directly in compat.h, introduce
set_compat_task() to set/reset those when needed.
Also, since it's only used on an if/else scenario, simplify the macro using
it.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20240103160024.70305-7-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
task_user_regset_view() makes use of a function very similar to
is_compat_task(), but pointing to a any thread.
In arm64 asm/compat.h there is a function very similar to that:
is_compat_thread(struct thread_info *thread)
Copy this function to riscv asm/compat.h and make use of it into
task_user_regset_view().
Also, introduce a compile-time test for CONFIG_COMPAT and simplify the
function code by removing the #ifdef.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Andy Chiu <andy.chiu@sifive.com>
Link: https://lore.kernel.org/r/20240103160024.70305-6-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently several places will test for CONFIG_COMPAT before testing
is_compat_task(), probably in order to avoid a run-time test into the task
structure.
Since is_compat_task() is an inlined function, it would be helpful to add a
compile-time test of CONFIG_COMPAT, making sure it always returns zero when
the option is not enabled during the kernel build.
With this, the compiler is able to understand in build-time that
is_compat_task() will always return 0, and optimize-out some of the extra
code introduced by the option.
This will also allow removing a lot #ifdefs that were introduced, and make
the code more clean.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Andy Chiu <andy.chiu@sifive.com>
Link: https://lore.kernel.org/r/20240103160024.70305-5-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
There is some code that detects compat mode into a task by checking the
flag directly, and other code that check using the helper is_compat_task().
Since the helper already exists, use it instead of checking the flags
directly.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Link: https://lore.kernel.org/r/20240103160024.70305-4-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This macro caused me some confusion, which took some reviewer's time to
make it clear, so I propose adding a short comment in code to avoid
confusion in the future.
Also, added some improvements to the macro, such as removing the
assumption of VA_USER_SV57 being the largest address space.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20240103160024.70305-3-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
ARCH_STARFIVE is not restricted to 64-bit platforms, so while Will's
addition of a 64-bit only condition satisfied the build robots doing
COMPILE_TEST builds, Palmer ran into the same problems with writeq()
being undefined during regular rv32 builds.
Promote the dependency on 64-bit to its own `depends on` so that the
driver can never be included in 32-bit builds.
Reported-by: Palmer Dabbelt <palmer@rivosinc.com>
Fixes: c2b24812f7bc ("perf: starfive: Add StarLink PMU support")
Fixes: f0dbc6d0de38 ("perf: starfive: Only allow COMPILE_TEST for 64-bit architectures")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
Acked-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/r/20240318-emphatic-rally-f177a4fe1bdc@spud
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more ARM SoC updates from Arnd Bergmann:
"These are changes that for some reason ended up not making it into the
first four branches but that should still make it into 6.9:
- A rework of the omap clock support that touches both drivers and
device tree files
- The reset controller branch changes that had a dependency on late
bugfixes. Merging them here avoids a backmerge of 6.8-rc5 into the
drivers branch
- The RISC-V/starfive, RISC-V/microchip and ARM/Broadcom devicetree
changes that got delayed and needed some extra time in linux-next
for wider testing"
* tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
soc: fsl: dpio: fix kcalloc() argument order
bus: ts-nbus: Improve error reporting
bus: ts-nbus: Convert to atomic pwm API
riscv: dts: starfive: jh7110: Add camera subsystem nodes
ARM: bcm: stop selecing CONFIG_TICK_ONESHOT
ARM: dts: omap3: Update clksel clocks to use reg instead of ti,bit-shift
ARM: dts: am3: Update clksel clocks to use reg instead of ti,bit-shift
clk: ti: Improve clksel clock bit parsing for reg property
clk: ti: Handle possible address in the node name
dt-bindings: pwm: opencores: Add compatible for StarFive JH8100
dt-bindings: riscv: cpus: reg matches hart ID
reset: Instantiate reset GPIO controller for shared reset-gpios
reset: gpio: Add GPIO-based reset controller
cpufreq: do not open-code of_phandle_args_equal()
of: Add of_phandle_args_equal() helper
reset: simple: add support for Sophgo SG2042
dt-bindings: reset: sophgo: support SG2042
riscv: dts: microchip: add specific compatible for mpfs pdma
riscv: dts: microchip: add missing CAN bus clocks
ARM: brcmstb: Add debug UART entry for 74165
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Heiko Carstens:
- Various virtual vs physical address usage fixes
- Add new bitwise types and helper functions and use them in s390
specific drivers and code to make it easier to find virtual vs
physical address usage bugs.
Right now virtual and physical addresses are identical for s390,
except for module, vmalloc, and similar areas. This will be changed,
hopefully with the next merge window, so that e.g. the kernel image
and modules will be located close to each other, allowing for direct
branches and also for some other simplifications.
As a prerequisite this requires to fix all misuses of virtual and
physical addresses. As it turned out people are so used to the
concept that virtual and physical addresses are the same, that new
bugs got added to code which was already fixed. In order to avoid
that even more code gets merged which adds such bugs add and use new
bitwise types, so that sparse can be used to find such usage bugs.
Most likely the new types can go away again after some time
- Provide a simple ARCH_HAS_DEBUG_VIRTUAL implementation
- Fix kprobe branch handling: if an out-of-line single stepped relative
branch instruction has a target address within a certain address area
in the entry code, the program check handler may incorrectly execute
cleanup code as if KVM code was executed, leading to crashes
- Fix reference counting of zcrypt card objects
- Various other small fixes and cleanups
* tag 's390-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits)
s390/entry: compare gmap asce to determine guest/host fault
s390/entry: remove OUTSIDE macro
s390/entry: add CIF_SIE flag and remove sie64a() address check
s390/cio: use while (i--) pattern to clean up
s390/raw3270: make class3270 constant
s390/raw3270: improve raw3270_init() readability
s390/tape: make tape_class constant
s390/vmlogrdr: make vmlogrdr_class constant
s390/vmur: make vmur_class constant
s390/zcrypt: make zcrypt_class constant
s390/mm: provide simple ARCH_HAS_DEBUG_VIRTUAL support
s390/vfio_ccw_cp: use new address translation helpers
s390/iucv: use new address translation helpers
s390/ctcm: use new address translation helpers
s390/lcs: use new address translation helpers
s390/qeth: use new address translation helpers
s390/zfcp: use new address translation helpers
s390/tape: fix virtual vs physical address confusion
s390/3270: use new address translation helpers
s390/3215: use new address translation helpers
...
|
|
The two example echo commands for binding the spidev driver were being
rendered as one line in the HTML output. This patch makes use of the
restructured text :: to format the commands as a code block instead
which preserves the line break.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://msgid.link/r/20240319183344.2106335-1-dlechner@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As __assign_str() no longer uses its "src" parameter, there's a check to
make sure nothing depends on it being different than what was passed to
__string(). It originally just compared the pointer passed to __string()
with the pointer passed into __assign_str() via the "src" parameter. But
there's a couple of outliers that just pass in a quoted string constant,
where comparing the pointers is UB to the compiler, as the compiler is
free to create multiple copies of the same string constant.
Instead, just use strcmp(). It may slow down the trace event, but this
will eventually be removed.
Also, fix the issue of passing NULL to strcmp() by adding a WARN_ON() to
make sure that both "src" and the pointer saved in __string() are either
both NULL or have content, and then checking if "src" is not NULL before
performing the strcmp().
Link: https://lore.kernel.org/all/CAHk-=wjxX16kWd=uxG5wzqt=aXoYDf1BgWOKk+qVmAO0zh7sjA@mail.gmail.com/
Fixes: b1afefa62ca9 ("tracing: Use strcmp() in __assign_str() WARN_ON() check")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update the Energy Model to make it prevent errors due to power
unit mismatches, fix a typo in power management documentation, convert
one driver to using a platform remove callback returning void, address
two cpufreq issues (one in the core and one in the DT driver), and
enable boost support in the SCMI cpufreq driver.
Specifics:
- Modify the Energy Model code to bail out and complain if the unit
of power is not uW to prevent errors due to unit mismatches (Lukasz
Luba)
- Make the intel_rapl platform driver use a remove callback returning
void (Uwe Kleine-König)
- Fix typo in the suspend and interrupts document (Saravana Kannan)
- Make per-policy boost flags actually take effect on platforms using
cpufreq_boost_set_sw() (Sibi Sankar)
- Enable boost support in the SCMI cpufreq driver (Sibi Sankar)
- Make the DT cpufreq driver use zalloc_cpumask_var() for allocating
cpumasks to avoid using unitinialized memory (Marek Szyprowski)"
* tag 'pm-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: scmi: Enable boost support
firmware: arm_scmi: Add support for marking certain frequencies as turbo
cpufreq: dt: always allocate zeroed cpumask
cpufreq: Fix per-policy boost behavior on SoCs using cpufreq_boost_set_sw()
Documentation: power: Fix typo in suspend and interrupts doc
PM: EM: Force device drivers to provide power in uW
powercap: intel_rapl: Convert to platform remove callback returning void
|
