summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-21s390/bpf: Tolerate not converging code shrinkingIlya Leoshkevich
"BPF_MAXINSNS: Maximum possible literals" unnecessarily falls back to the interpreter because of failing sanity check in bpf_set_addr. The problem is that there are a lot of branches that can be shrunk, and doing so opens up the possibility to shrink even more. This process does not converge after 3 passes, causing code offsets to change during the codegen pass, which must never happen. Fix by inserting nops during codegen pass in order to preserve code offets. Fixes: 4e9b4a6883dd ("s390/bpf: Use relative long branches") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200717165326.6786-5-iii@linux.ibm.com
2020-07-21s390/bpf: Use brcl for jumping to exit_ip if necessaryIlya Leoshkevich
"BPF_MAXINSNS: Maximum possible literals" test causes panic with bpf_jit_harden = 2. The reason is that BPF_JMP | BPF_EXIT is always emitted as brc, however, after removal of JITed image size limitations, brcl might be required. Fix by using brcl when necessary. Fixes: 4e9b4a6883dd ("s390/bpf: Use relative long branches") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200717165326.6786-4-iii@linux.ibm.com
2020-07-21s390/bpf: Fix sign extension in branch_kuIlya Leoshkevich
Both signed and unsigned variants of BPF_JMP | BPF_K require sign-extending the immediate. JIT emits cgfi for the signed case, which is correct, and clgfi for the unsigned case, which is not correct: clgfi zero-extends the immediate. s390 does not provide an instruction that does sign-extension and unsigned comparison at the same time. Therefore, fix by first loading the sign-extended immediate into work register REG_1 and proceeding as if it's BPF_X. Fixes: 4e9b4a6883dd ("s390/bpf: Use relative long branches") Reported-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Seth Forshee <seth.forshee@canonical.com> Link: https://lore.kernel.org/bpf/20200717165326.6786-3-iii@linux.ibm.com
2020-07-21selftests: bpf: test_kmod.sh: Fix running out of srctreeIlya Leoshkevich
When running out of srctree, relative path to lib/test_bpf.ko is different than when running in srctree. Check $building_out_of_srctree environment variable and use a different relative path if needed. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200717165326.6786-2-iii@linux.ibm.com
2020-07-21btrfs: fix mount failure caused by race with umountBoris Burkov
It is possible to cause a btrfs mount to fail by racing it with a slow umount. The crux of the sequence is generic_shutdown_super not yet calling sop->put_super before btrfs_mount_root calls btrfs_open_devices. If that occurs, btrfs_open_devices will decide the opened counter is non-zero, increment it, and skip resetting fs_devices->total_rw_bytes to 0. From here, mount will call sget which will result in grab_super trying to take the super block umount semaphore. That semaphore will be held by the slow umount, so mount will block. Before up-ing the semaphore, umount will delete the super block, resulting in mount's sget reliably allocating a new one, which causes the mount path to dutifully fill it out, and increment total_rw_bytes a second time, which causes the mount to fail, as we see double the expected bytes. Here is the sequence laid out in greater detail: CPU0 CPU1 down_write sb->s_umount btrfs_kill_super kill_anon_super(sb) generic_shutdown_super(sb); shrink_dcache_for_umount(sb); sync_filesystem(sb); evict_inodes(sb); // SLOW btrfs_mount_root btrfs_scan_one_device fs_devices = device->fs_devices fs_info->fs_devices = fs_devices // fs_devices-opened makes this a no-op btrfs_open_devices(fs_devices, mode, fs_type) s = sget(fs_type, test, set, flags, fs_info); find sb in s_instances grab_super(sb); down_write(&s->s_umount); // blocks sop->put_super(sb) // sb->fs_devices->opened == 2; no-op spin_lock(&sb_lock); hlist_del_init(&sb->s_instances); spin_unlock(&sb_lock); up_write(&sb->s_umount); return 0; retry lookup don't find sb in s_instances (deleted by CPU0) s = alloc_super return s; btrfs_fill_super(s, fs_devices, data) open_ctree // fs_devices total_rw_bytes improperly set! btrfs_read_chunk_tree read_one_dev // increment total_rw_bytes again!! super_total_bytes < fs_devices->total_rw_bytes // ERROR!!! To fix this, we clear total_rw_bytes from within btrfs_read_chunk_tree before the calls to read_one_dev, while holding the sb umount semaphore and the uuid mutex. To reproduce, it is sufficient to dirty a decent number of inodes, then quickly umount and mount. for i in $(seq 0 500) do dd if=/dev/zero of="/mnt/foo/$i" bs=1M count=1 done umount /mnt/foo& mount /mnt/foo does the trick for me. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Boris Burkov <boris@bur.io> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-07-21btrfs: fix page leaks after failure to lock page for delallocRobbie Ko
When locking pages for delalloc, we check if it's dirty and mapping still matches. If it does not match, we need to return -EAGAIN and release all pages. Only the current page was put though, iterate over all the remaining pages too. CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Robbie Ko <robbieko@synology.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-07-21btrfs: qgroup: fix data leak caused by race between writeback and truncateQu Wenruo
[BUG] When running tests like generic/013 on test device with btrfs quota enabled, it can normally lead to data leak, detected at unmount time: BTRFS warning (device dm-3): qgroup 0/5 has unreleased space, type 0 rsv 4096 ------------[ cut here ]------------ WARNING: CPU: 11 PID: 16386 at fs/btrfs/disk-io.c:4142 close_ctree+0x1dc/0x323 [btrfs] RIP: 0010:close_ctree+0x1dc/0x323 [btrfs] Call Trace: btrfs_put_super+0x15/0x17 [btrfs] generic_shutdown_super+0x72/0x110 kill_anon_super+0x18/0x30 btrfs_kill_super+0x17/0x30 [btrfs] deactivate_locked_super+0x3b/0xa0 deactivate_super+0x40/0x50 cleanup_mnt+0x135/0x190 __cleanup_mnt+0x12/0x20 task_work_run+0x64/0xb0 __prepare_exit_to_usermode+0x1bc/0x1c0 __syscall_return_slowpath+0x47/0x230 do_syscall_64+0x64/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ---[ end trace caf08beafeca2392 ]--- BTRFS error (device dm-3): qgroup reserved space leaked [CAUSE] In the offending case, the offending operations are: 2/6: writev f2X[269 1 0 0 0 0] [1006997,67,288] 0 2/7: truncate f2X[269 1 0 0 48 1026293] 18388 0 The following sequence of events could happen after the writev(): CPU1 (writeback) | CPU2 (truncate) ----------------------------------------------------------------- btrfs_writepages() | |- extent_write_cache_pages() | |- Got page for 1003520 | | 1003520 is Dirty, no writeback | | So (!clear_page_dirty_for_io()) | | gets called for it | |- Now page 1003520 is Clean. | | | btrfs_setattr() | | |- btrfs_setsize() | | |- truncate_setsize() | | New i_size is 18388 |- __extent_writepage() | | |- page_offset() > i_size | |- btrfs_invalidatepage() | |- Page is clean, so no qgroup | callback executed This means, the qgroup reserved data space is not properly released in btrfs_invalidatepage() as the page is Clean. [FIX] Instead of checking the dirty bit of a page, call btrfs_qgroup_free_data() unconditionally in btrfs_invalidatepage(). As qgroup rsv are completely bound to the QGROUP_RESERVED bit of io_tree, not bound to page status, thus we won't cause double freeing anyway. Fixes: 0b34c261e235 ("btrfs: qgroup: Prevent qgroup->reserved from going subzero") CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-07-21drm/amdgpu: Fix NULL dereference in dpm sysfs handlersPaweł Gronowski
NULL dereference occurs when string that is not ended with space or newline is written to some dpm sysfs interface (for example pp_dpm_sclk). This happens because strsep replaces the tmp with NULL if the delimiter is not present in string, which is then dereferenced by tmp[0]. Reproduction example: sudo sh -c 'echo -n 1 > /sys/class/drm/card0/device/pp_dpm_sclk' Signed-off-by: Paweł Gronowski <me@woland.xyz> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-07-21drm/amd/powerplay: fix a crash when overclocking Vega MQiu Wenbo
Avoid kernel crash when vddci_control is SMU7_VOLTAGE_CONTROL_NONE and vddci_voltage_table is empty. It has been tested on Intel Hades Canyon (i7-8809G). Bug: https://bugzilla.kernel.org/show_bug.cgi?id=208489 Fixes: ac7822b0026f ("drm/amd/powerplay: add smumgr support for VEGAM (v2)") Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Qiu Wenbo <qiuwenbo@phytium.com.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-07-21btrfs: fix double free on ulist after backref resolution failureFilipe Manana
At btrfs_find_all_roots_safe() we allocate a ulist and set the **roots argument to point to it. However if later we fail due to an error returned by find_parent_nodes(), we free that ulist but leave a dangling pointer in the **roots argument. Upon receiving the error, a caller of this function can attempt to free the same ulist again, resulting in an invalid memory access. One such scenario is during qgroup accounting: btrfs_qgroup_account_extents() --> calls btrfs_find_all_roots() passes &new_roots (a stack allocated pointer) to btrfs_find_all_roots() --> btrfs_find_all_roots() just calls btrfs_find_all_roots_safe() passing &new_roots to it --> allocates ulist and assigns its address to **roots (which points to new_roots from btrfs_qgroup_account_extents()) --> find_parent_nodes() returns an error, so we free the ulist and leave **roots pointing to it after returning --> btrfs_qgroup_account_extents() sees btrfs_find_all_roots() returned an error and jumps to the label 'cleanup', which just tries to free again the same ulist Stack trace example: ------------[ cut here ]------------ BTRFS: tree first key check failed WARNING: CPU: 1 PID: 1763215 at fs/btrfs/disk-io.c:422 btrfs_verify_level_key+0xe0/0x180 [btrfs] Modules linked in: dm_snapshot dm_thin_pool (...) CPU: 1 PID: 1763215 Comm: fsstress Tainted: G W 5.8.0-rc3-btrfs-next-64 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:btrfs_verify_level_key+0xe0/0x180 [btrfs] Code: 28 5b 5d (...) RSP: 0018:ffffb89b473779a0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff90397759bf08 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000027 RDI: 00000000ffffffff RBP: ffff9039a419c000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: ffffb89b43301000 R12: 000000000000005e R13: ffffb89b47377a2e R14: ffffb89b473779af R15: 0000000000000000 FS: 00007fc47e1e1000(0000) GS:ffff9039ac200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc47e1df000 CR3: 00000003d9e4e001 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: read_block_for_search+0xf6/0x350 [btrfs] btrfs_next_old_leaf+0x242/0x650 [btrfs] resolve_indirect_refs+0x7cf/0x9e0 [btrfs] find_parent_nodes+0x4ea/0x12c0 [btrfs] btrfs_find_all_roots_safe+0xbf/0x130 [btrfs] btrfs_qgroup_account_extents+0x9d/0x390 [btrfs] btrfs_commit_transaction+0x4f7/0xb20 [btrfs] btrfs_sync_file+0x3d4/0x4d0 [btrfs] do_fsync+0x38/0x70 __x64_sys_fdatasync+0x13/0x20 do_syscall_64+0x5c/0xe0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fc47e2d72e3 Code: Bad RIP value. RSP: 002b:00007fffa32098c8 EFLAGS: 00000246 ORIG_RAX: 000000000000004b RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc47e2d72e3 RDX: 00007fffa3209830 RSI: 00007fffa3209830 RDI: 0000000000000003 RBP: 000000000000072e R08: 0000000000000001 R09: 0000000000000003 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000000003e8 R13: 0000000051eb851f R14: 00007fffa3209970 R15: 00005607c4ac8b50 irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [<ffffffffb8eb5e85>] copy_process+0x755/0x1eb0 softirqs last enabled at (0): [<ffffffffb8eb5e85>] copy_process+0x755/0x1eb0 softirqs last disabled at (0): [<0000000000000000>] 0x0 ---[ end trace 8639237550317b48 ]--- BTRFS error (device sdc): tree first key mismatch detected, bytenr=62324736 parent_transid=94 key expected=(262,108,1351680) has=(259,108,1921024) general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI CPU: 2 PID: 1763215 Comm: fsstress Tainted: G W 5.8.0-rc3-btrfs-next-64 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:ulist_release+0x14/0x60 [btrfs] Code: c7 07 00 (...) RSP: 0018:ffffb89b47377d60 EFLAGS: 00010282 RAX: 6b6b6b6b6b6b6b6b RBX: ffff903959b56b90 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000270024 RDI: ffff9036e2adc840 RBP: ffff9036e2adc848 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9036e2adc840 R13: 0000000000000015 R14: ffff9039a419ccf8 R15: ffff90395d605840 FS: 00007fc47e1e1000(0000) GS:ffff9039ac600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8c1c0a51c8 CR3: 00000003d9e4e004 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ulist_free+0x13/0x20 [btrfs] btrfs_qgroup_account_extents+0xf3/0x390 [btrfs] btrfs_commit_transaction+0x4f7/0xb20 [btrfs] btrfs_sync_file+0x3d4/0x4d0 [btrfs] do_fsync+0x38/0x70 __x64_sys_fdatasync+0x13/0x20 do_syscall_64+0x5c/0xe0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fc47e2d72e3 Code: Bad RIP value. RSP: 002b:00007fffa32098c8 EFLAGS: 00000246 ORIG_RAX: 000000000000004b RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc47e2d72e3 RDX: 00007fffa3209830 RSI: 00007fffa3209830 RDI: 0000000000000003 RBP: 000000000000072e R08: 0000000000000001 R09: 0000000000000003 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000000003e8 R13: 0000000051eb851f R14: 00007fffa3209970 R15: 00005607c4ac8b50 Modules linked in: dm_snapshot dm_thin_pool (...) ---[ end trace 8639237550317b49 ]--- RIP: 0010:ulist_release+0x14/0x60 [btrfs] Code: c7 07 00 (...) RSP: 0018:ffffb89b47377d60 EFLAGS: 00010282 RAX: 6b6b6b6b6b6b6b6b RBX: ffff903959b56b90 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000270024 RDI: ffff9036e2adc840 RBP: ffff9036e2adc848 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9036e2adc840 R13: 0000000000000015 R14: ffff9039a419ccf8 R15: ffff90395d605840 FS: 00007fc47e1e1000(0000) GS:ffff9039ad200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6a776f7d40 CR3: 00000003d9e4e002 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fix this by making btrfs_find_all_roots_safe() set *roots to NULL after it frees the ulist. Fixes: 8da6d5815c592b ("Btrfs: added btrfs_find_all_roots()") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-07-21RDMA/mlx5: Prevent prefetch from racing with implicit destructionJason Gunthorpe
Prefetch work in mlx5_ib_prefetch_mr_work can be queued and able to run concurrently with destruction of the implicit MR. The num_deferred_work was intended to serialize this, but there is a race: CPU0 CPU1 mlx5_ib_free_implicit_mr() xa_erase(odp_mkeys) synchronize_srcu() __xa_erase(implicit_children) mlx5_ib_prefetch_mr_work() pagefault_mr() pagefault_implicit_mr() implicit_get_child_mr() xa_cmpxchg() atomic_dec_and_test(num_deferred_mr) wait_event(imr->q_deferred_work) ib_umem_odp_release(odp_imr) kfree(odp_imr) At this point in mlx5_ib_free_implicit_mr() the implicit_children list is supposed to be empty forever so that destroy_unused_implicit_child_mr() and related are not and will not be running. Since it is not empty the destroy_unused_implicit_child_mr() flow ends up touching deallocated memory as mlx5_ib_free_implicit_mr() already tore down the imr parent. The solution is to flush out the prefetch wq by driving num_deferred_work to zero after creation of new prefetch work is blocked. Fixes: 5256edcb98a1 ("RDMA/mlx5: Rework implicit ODP destroy") Link: https://lore.kernel.org/r/20200719065435.130722-1-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-21bpf: cpumap: Fix possible rcpu kthread hungLorenzo Bianconi
Fix the following cpumap kthread hung. The issue is currently occurring when __cpu_map_load_bpf_program fails (e.g if the bpf prog has not BPF_XDP_CPUMAP as expected_attach_type) $./test_progs -n 101 101/1 cpumap_with_progs:OK 101 xdp_cpumap_attach:OK Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED [ 369.996478] INFO: task cpumap/0/map:7:205 blocked for more than 122 seconds. [ 369.998463] Not tainted 5.8.0-rc4-01472-ge57892f50a07 #212 [ 370.000102] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 370.001918] cpumap/0/map:7 D 0 205 2 0x00004000 [ 370.003228] Call Trace: [ 370.003930] __schedule+0x5c7/0xf50 [ 370.004901] ? io_schedule_timeout+0xb0/0xb0 [ 370.005934] ? static_obj+0x31/0x80 [ 370.006788] ? mark_held_locks+0x24/0x90 [ 370.007752] ? cpu_map_bpf_prog_run_xdp+0x6c0/0x6c0 [ 370.008930] schedule+0x6f/0x160 [ 370.009728] schedule_preempt_disabled+0x14/0x20 [ 370.010829] kthread+0x17b/0x240 [ 370.011433] ? kthread_create_worker_on_cpu+0xd0/0xd0 [ 370.011944] ret_from_fork+0x1f/0x30 [ 370.012348] Showing all locks held in the system: [ 370.013025] 1 lock held by khungtaskd/33: [ 370.013432] #0: ffffffff82b24720 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x28/0x1c3 [ 370.014461] ============================================= Fixes: 9216477449f3 ("bpf: cpumap: Add the possibility to attach an eBPF program to cpumap") Reported-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Jakub Sitnicki <jakub@cloudflare.com> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/e54f2aabf959f298939e5507b09c48f8c2e380be.1595170625.git.lorenzo@kernel.org
2020-07-21bpf, netns: Fix build without CONFIG_INETJakub Sitnicki
When CONFIG_NET is set but CONFIG_INET isn't, build fails with: ld: kernel/bpf/net_namespace.o: in function `netns_bpf_attach_type_unneed': kernel/bpf/net_namespace.c:32: undefined reference to `bpf_sk_lookup_enabled' ld: kernel/bpf/net_namespace.o: in function `netns_bpf_attach_type_need': kernel/bpf/net_namespace.c:43: undefined reference to `bpf_sk_lookup_enabled' This is because without CONFIG_INET bpf_sk_lookup_enabled symbol is not available. Wrap references to bpf_sk_lookup_enabled with preprocessor conditionals. Fixes: 1559b4aa1db4 ("inet: Run SK_LOOKUP BPF program on socket lookup") Reported-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Link: https://lore.kernel.org/bpf/20200721100716.720477-1-jakub@cloudflare.com
2020-07-21Merge tag 'timers-v5.8-rc7' of ↵Thomas Gleixner
https://git.linaro.org/people/daniel.lezcano/linux into timers/urgent Pull a timer chip fix from Daniel Lezcano: - Fix kernel panic at suspend / resume time on TI am3/am4 (Tony Lindgren)
2020-07-21Merge tag 'sound-5.8-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into master Pull sound fixes from Takashi Iwai: "This became fairly large, containing mostly the collection of ASoC fixes that slipped from the previous request, so I sent now a bit earlier than usual. But all changes look small and mostly device-specific, hence nothing to worry too much. Majority of changes are for x86 based platforms and their CODEC drivers, in order to address some issues hit by their recent tests and fuzzing. The rest are other ASoC device-specific fixes (imx, qcom, wm8974, amd, rockchip) as well as a trivial fix for a kernel WARNING hit by syzkaller" * tag 'sound-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits) ALSA: hda/realtek: Fixed ALC298 sound bug by adding quirk for Samsung Notebook Pen S ALSA: info: Drop WARN_ON() from buffer NULL sanity check ASoC: rt5682: Report the button event in the headset type only ASoC: Intel: bytcht_es8316: Add missed put_device() ASoC: rt5682: Enable Vref2 under using PLL2 ASoC: rt286: fix unexpected interrupt happens ASoC: wm8974: remove unsupported clock mode ASoC: wm8974: fix Boost Mixer Aux Switch ASoC: SOF: core: fix null-ptr-deref bug during device removal ASoc: codecs: max98373: remove Idle_bias_on to let codec suspend ASoC: codecs: max98373: Removed superfluous volume control from chip default ASoC: topology: fix tlvs in error handling for widget_dmixer ASoC: topology: fix kernel oops on route addition error ASoC: SOF: imx: add min/max channels for SAI/ESAI on i.MX8/i.MX8M ASoC: Intel: bdw-rt5677: fix non BE conversion ASoC: soc-dai: set dai_link dpcm_ flags with a helper MAINTAINERS: Add Shengjiu to reviewer list of sound/soc/fsl ASoC: core: Remove only the registered component in devm functions MAINTAINERS: Change Maintainer for some at91 drivers ASoC: dt-bindings: simple-card: Fix 'make dt_binding_check' warnings ...
2020-07-21clocksource/drivers/timer-ti-dm: Fix suspend and resume for am3 and am4Tony Lindgren
Carlos Hernandez <ceh@ti.com> reported that we now have a suspend and resume regresssion on am3 and am4 compared to the earlier kernels. While suspend and resume works with v5.8-rc3, we now get errors with rtcwake: pm33xx pm33xx: PM: Could not transition all powerdomains to target state ... rtcwake: write error This is because we now fail to idle the system timer clocks that the idle code checks and the error gets propagated to the rtcwake. Turns out there are several issues that need to be fixed: 1. Ignore no-idle and no-reset configured timers for the ti-sysc interconnect target driver as otherwise it will keep the system timer clocks enabled 2. Toggle the system timer functional clock for suspend for am3 and am4 (but not for clocksource on am3) 3. Only reconfigure type1 timers in dmtimer_systimer_disable() 4. Use of_machine_is_compatible() instead of of_device_is_compatible() for checking the SoC type Fixes: 52762fbd1c47 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support") Reported-by: Carlos Hernandez <ceh@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Carlos Hernandez <ceh@ti.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200713162601.6829-1-tony@atomide.com
2020-07-21s390/cpum_cf,perf: change DFLT_CCERROR counter nameThomas Richter
Change the counter name DLFT_CCERROR to DLFT_CCFINISH on IBM z15. This counter counts completed DEFLATE instructions with exit code 0, 1 or 2. Since exit code 0 means success and exit code 1 or 2 indicate errors, change the counter name to avoid confusion. This counter is incremented each time the DEFLATE instruction completed regardless if an error was detected or not. Fixes: d68d5d51dc89 ("s390/cpum_cf: Add new extended counters for IBM z15") Fixes: e7950166e402 ("perf vendor events s390: Add new deflate counters for IBM z15") Cc: stable@vger.kernel.org # v5.7 Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-20riscv: kasan: use local_tlb_flush_all() to avoid uninitialized __sbi_rfenceVincent Chen
It fails to boot the v5.8-rc4 kernel with CONFIG_KASAN because kasan_init and kasan_early_init use uninitialized __sbi_rfence as executing the tlb_flush_all(). Actually, at this moment, only the CPU which is responsible for the system initialization enables the MMU. Other CPUs are parking at the .Lsecondary_start. Hence the tlb_flush_all() is able to be replaced by local_tlb_flush_all() to avoid using uninitialized __sbi_rfence. Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-07-20tipc: allow to build NACK message in link timeout functionTung Nguyen
Commit 02288248b051 ("tipc: eliminate gap indicator from ACK messages") eliminated sending of the 'gap' indicator in regular ACK messages and only allowed to build NACK message with enabled probe/probe_reply. However, necessary correction for building NACK message was missed in tipc_link_timeout() function. This leads to significant delay and link reset (due to retransmission failure) in lossy environment. This commit fixes it by setting the 'probe' flag to 'true' when the receive deferred queue is not empty. As a result, NACK message will be built to send back to another peer. Fixes: 02288248b051 ("tipc: eliminate gap indicator from ACK messages") Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21exfat: fix name_hash computation on big endian systemsIlya Ponetayev
On-disk format for name_hash field is LE, so it must be explicitly transformed on BE system for proper result. Fixes: 370e812b3ec1 ("exfat: add nls operations") Cc: stable@vger.kernel.org # v5.7 Signed-off-by: Chen Minqiang <ptpt52@gmail.com> Signed-off-by: Ilya Ponetayev <i.ponetaev@ndmsystems.com> Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com> Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
2020-07-21exfat: fix wrong size update of stream entry by typoHyeongseok Kim
The stream.size field is updated to the value of create timestamp of the file entry. Fix this to use correct stream entry pointer. Fixes: 29bbb14bfc80 ("exfat: fix incorrect update of stream entry in __exfat_truncate()") Signed-off-by: Hyeongseok Kim <hyeongseok@gmail.com> Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
2020-07-21exfat: fix wrong hint_stat initialization in exfat_find_dir_entry()Namjae Jeon
We found the wrong hint_stat initialization in exfat_find_dir_entry(). It should be initialized when cluster is EXFAT_EOF_CLUSTER. Fixes: ca06197382bd ("exfat: add directory operations") Cc: stable@vger.kernel.org # v5.7 Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com> Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
2020-07-21exfat: fix overflow issue in exfat_cluster_to_sector()Namjae Jeon
An overflow issue can occur while calculating sector in exfat_cluster_to_sector(). It needs to cast clus's type to sector_t before left shifting. Fixes: 1acf1a564b60 ("exfat: add in-memory and on-disk structures and headers") Cc: stable@vger.kernel.org # v5.7 Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com> Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
2020-07-20net: neterion: vxge: reduce stack usage in VXGE_COMPLETE_VPATH_TXBixuan Cui
Fix the warning: [-Werror=-Wframe-larger-than=] drivers/net/ethernet/neterion/vxge/vxge-main.c: In function'VXGE_COMPLETE_VPATH_TX.isra.37': drivers/net/ethernet/neterion/vxge/vxge-main.c:119:1: warning: the frame size of 1056 bytes is larger than 1024 bytes Dropping the NR_SKB_COMPLETED to 16 is appropriate that won't have much impact on performance and functionality. Signed-off-by: Bixuan Cui <cuibixuan@huawei.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: ag71xx: add missed clk_disable_unprepare in error path of probeHuang Guobin
The ag71xx_mdio_probe() forgets to call clk_disable_unprepare() when of_reset_control_get_exclusive() failed. Add the missed call to fix it. Fixes: d51b6ce441d3 ("net: ethernet: add ag71xx driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Huang Guobin <huangguobin4@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net/sched: act_ct: fix restore the qdisc_skb_cb after defragwenxu
The fragment packets do defrag in tcf_ct_handle_fragments will clear the skb->cb which make the qdisc_skb_cb clear too. So the qdsic_skb_cb should be store before defrag and restore after that. It also update the pkt_len after all the fragments finish the defrag to one packet and make the following actions counter correct. Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct") Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: dsa: use the ETH_MIN_MTU and ETH_DATA_LEN default valuesVladimir Oltean
Now that DSA supports MTU configuration, undo the effects of commit 8b1efc0f83f1 ("net: remove MTU limits on a few ether_setup callers") and let DSA interfaces use the default min_mtu and max_mtu specified by ether_setup(). This is more important for min_mtu: since DSA is Ethernet, the minimum MTU is the same as of any other Ethernet interface, and definitely not zero. For the max_mtu, we have a callback through which drivers can override that, if they want to. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: dsa: qca8k: implement the port MTU callbacksJonathan McDowell
This switch has a single max frame size configuration register, so we track the requested MTU for each port and apply the largest. v2: - Address review feedback from Vladimir Oltean Signed-off-by: Jonathan McDowell <noodles@earth.li> Acked-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: hsr: remove redundant null checkWang Hai
Because kfree_skb already checked NULL skb parameter, so the additional checks are unnecessary, just remove them. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net/fealnx: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated, GFP_KERNEL can be used because it is called from the probe function (i.e. 'fealnx_init_one()') and no lock is taken. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20mISDN: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'setup_hw()' (hfcpci.c) GFP_KERNEL can be used because it is called from the probe function and no lock is taken. The call chain is: hfc_probe() --> setup_card() --> setup_hw() When memory is allocated in 'inittiger()' (netjet.c) GFP_ATOMIC must be used because a spin_lock is taken by the caller (i.e. 'nj_init_card()') This is also consistent with the other allocations done in the function. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20nfc: s3fwrn5: add missing release on skb in s3fwrn5_recv_frameNavid Emamdoost
The implementation of s3fwrn5_recv_frame() is supposed to consume skb on all execution paths. Release skb before returning -ENODEV. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20tc-testing: Add tdc to kselftestsBriana Oursler
Add tdc to existing kselftest infrastructure so that it can be run with existing kselftests. TDC now generates objects in objdir/kselftest without cluttering main objdir, leaves source directory clean, and installs correctly in kselftest_install, properly adding itself to run_kselftest.sh script. Add tc-testing as a target of selftests/Makefile. Create tdc.sh to run tdc.py targets with correct arguments. To support single target from selftest/Makefile, combine tc-testing/bpf/Makefile and tc-testing/Makefile. Move action.c up a directory to tc-testing/. Tested with: make O=/tmp/{objdir} TARGETS="tc-testing" kselftest cd /tmp/{objdir} cd kselftest cd tc-testing ./tdc.sh make -C tools/testing/selftests/ TARGETS=tc-testing run_tests make TARGETS="tc-testing" kselftest cd tools/testing/selftests ./kselftest_install.sh /tmp/exampledir My VM doesn't run all the kselftests so I commented out all except my target and net/pmtu.sh then: cd /tmp/exampledir && ./run_kselftest.sh Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Briana Oursler <briana.oursler@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20crypto/chtls: Enable tcp window scaling optionVinay Kumar Yadav
Enable tcp window scaling option in hw based on sysctl settings and option in connection request. v1->v2: - Set window scale option based on option in connection request. Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20crypto/chtls: correct net_device reference countVinay Kumar Yadav
ip_dev_find() call holds net_device reference which is not needed, use __ip_dev_find() which does not hold reference. v1->v2: - Correct submission tree. - Add fixes tag. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20crypto/chtls: fix tls alert messages corrupted by tls dataVinay Kumar Yadav
When tls data skb is pending for Tx and tls alert comes , It is wrongly overwrite the record type of tls data to tls alert record type. fix the issue correcting it. v1->v2: - Correct submission tree. - Add fixes tag. Fixes: 6919a8264a32 ("Crypto/chtls: add/delete TLS header in driver") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20Merge branch 'ionic-locking-and-filter-fixes'David S. Miller
Shannon Nelson says: ==================== ionic: locking and filter fixes These patches address an ethtool show regs problem, some locking sightings, and issues with RSS hash and filter_id tracking after a managed FW update. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20ionic: use mutex to protect queue operationsShannon Nelson
The ionic_wait_on_bit_lock() was a open-coded mutex knock-off used only for protecting the queue reset operations, and there was no reason not to use the real thing. We can use the lock more correctly and to better protect the queue stop and start operations from cross threading. We can also remove a useless and expensive bit operation from the Rx path. This fixes a case found where the link_status_check from a link flap could run into an MTU change and cause a crash. Fixes: beead698b173 ("ionic: Add the basic NDO callbacks for netdev support") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20ionic: keep rss hash after fw updateShannon Nelson
Make sure the RSS hash key is kept across a fw update by not de-initing it when an update is happening. Fixes: c672412f6172 ("ionic: remove lifs on fw reset") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20ionic: update filter id after replayShannon Nelson
When we replay the rx filters after a fw-upgrade we get new filter_id values from the FW, which we need to save and update in our local filter list. This allows us to delete the filters with the correct filter_id when we're done. Fixes: 7e4d47596b68 ("ionic: replay filters after fw upgrade") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20ionic: fix up filter locks and debug msgsShannon Nelson
Add in a couple of forgotten spinlocks and fix up some of the debug messages around filter management. Fixes: c1e329ebec8d ("ionic: Add management of rx filters") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20ionic: use offset for ethtool regs dataShannon Nelson
Use an offset to write the second half of the regs data into the second half of the buffer instead of overwriting the first half. Fixes: 4d03e00a2140 ("ionic: Add initial ethtool support") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20Merge branch 'net-atlantic-various-features'David S. Miller
Mark Starovoytov says: ==================== net: atlantic: various features This patchset adds more features for Atlantic NICs: * media detect; * additional per-queue stats; * PTP stats; * ipv6 support for TCP LSO and UDP GSO; * 64-bit operations; * A0 ntuple filters; * MAC temperature (hwmon). This work is a joint effort of Marvell developers. v3: * reworked patches related to stats: . fixed u64_stats_update_* usage; . use simple assignment in _get_stats / _fill_stats_data; . made _get_sw_stats / _fill_stats_data return count as return value; . split rx and tx per-queue stats; v2: https://patchwork.ozlabs.org/cover/1329652/ * removed media detect feature (will be reworked and submitted later); * removed irq counter from stats; * use u64_stats_update_* to protect 64-bit stats; * use io-64-nonatomic-lo-hi.h for readq/writeq fallbacks; v1: https://patchwork.ozlabs.org/cover/1327894/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: atlantic: add hwmon getter for MAC temperatureMark Starovoytov
This patch adds the possibility to obtain MAC temperature via hwmon. On A1 there are two separate temperature sensors. On A2 there's only one temperature sensor, which is used for reporting both MAC and PHY temperature. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: atlantic: A0 ntuple filtersDmitry Bogdanov
This patch adds support for ntuple filters on A0. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: atlantic: use intermediate variable to improve readability a bitNikita Danilov
This patch syncs up hw_atl_a0.c with an out-of-tree driver, where an intermediate variable was introduced in a couple of functions to improve the code readability a bit. Signed-off-by: Nikita Danilov <ndanilov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: atlantic: use U32_MAX in aq_hw_utils.cMark Starovoytov
This patch replaces magic constant ~0U usage with U32_MAX in aq_hw_utils.c Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: atlantic: add support for 64-bit reads/writesPavel Belous
This patch adds support for 64-bit reads/writes where applicable, e.g. A2 supports them. Signed-off-by: Pavel Belous <pbelous@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: atlantic: enable ipv6 support for TCP LSO and UDP GSOIgor Russkikh
This patch enables ipv6 support for TCP LSO and UDP GSO. The code itself (aq_nic_map_skb) was ready for this after udp gso feature, but corresponding NETIF_F_TSO6 wasn't enabled. We now have tested both tcp and udp v6 GSO, and enabling them safely. Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: atlantic: PTP statisticsPavel Belous
This patch adds PTP rings statistics. Before that these were missing from overall stats, hardening debugging and analysis. Signed-off-by: Pavel Belous <pbelous@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-19 12:24:21 +0000