summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-08-27sfc: Remove early call to efx_nic_type::reconfigure_mac in efx_reset_up()Ben Hutchings
efx_reset_up() calls efx_nic_type::reconfigure_mac once directly, then again through efx_start_all() -> efx_start_port() -> efx->type->reconfigure_mac(). This first call is also made too early to work properly on EF10. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27sfc: use MCDI epoch flag to improve MC reboot detection in the driverDaniel Pieczko
The Huntington MC will reject all MCDI requests after an MC reboot until it sees one with the NOT_EPOCH flag clear. This flag is set by default for all requests, and then cleared on the first request after we detect that an MC reboot has occurred. The old MCDI_STATUS_DELAY_COUNT gave a timeout of 10ms, which was not long enough for the driver to detect that a reboot had occurred based on the warm boot count while calling efx_mcdi_poll_reboot() from the loop in efx_mcdi_ev_death(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27sfc: Add EF10 support for TX/RX DMA error events handling.Alexandre Rames
Also, since we handle all DMA errors in the same way, merge RESET_TYPE_(RX|TX)_DESC_FETCH into RESET_TYPE_DMA_ERROR. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27sfc: Add a function pointer to abstract write of host time into NIC shared ↵Laurence Evans
memory Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27sfc: PTP MCDI requests need to initialise periph ID fieldLaurence Evans
This field is ignored by Siena firmware but is significant to EF10 firmware. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27sfc: Delegate MAC/NIC statistic description to efx_nic_typeBen Hutchings
Various hardware statistics that are available for Siena are unavailable or meaningless for Falcon. Huntington adds further to the NIC-type-specific statistics, as it has different MAC blocks from Falcon/Siena. All NIC types still provide most statistics by DMA, and use little-endian byte order. Therefore: 1. Add some general utility functions for reporting hardware statistics, efx_nic_describe_stats() and efx_nic_update_stats(). 2. Add an efx_nic_type::describe_stats operation to get the number and names of statistics, implemented using efx_nic_describe_stats() 3. Change efx_nic_type::update_stats to store the core statistics (struct rtnl_link_stats64) or full statistics (array of u64) in a caller-provided buffer. Use efx_nic_update_stats() to aid in the implementation. 4. Rename struct efx_ethtool_stat to struct efx_sw_stat_desc and EFX_ETHTOOL_NUM_STATS to EFX_ETHTOOL_SW_STAT_COUNT. 5. Remove efx_nic::mac_stats and struct efx_mac_stats. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27sfc: Remove driver-local struct ethtool_stringBen Hutchings
It's not really helpful to pretend ethtool string arrays are structured. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27sfc: Remove more left-overs from Falcon GMAC supportBen Hutchings
We only ever used the XMAC (10G link speed) in production. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27sfc: Move MTD operations into efx_nic_typeBen Hutchings
Merge the per-NIC-type MTD probe selection and struct efx_mtd_ops into struct efx_nic_type. Move the implementations into the appropriate source files. Several NVRAM functions are now only called from MTD operations which are now implemented in the same file (falcon.c or mcdi.c). There is no need for them to be extern, or to be defined at all if CONFIG_SFC_MTD is not enabled, so move them into the #ifdef CONFIG_SFC_MTD sections in those files. Most of the SPI-related definitions are also only used in falcon.c, so move them there. Put the remainder of spi.h into nic.h (which previously included it). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27openvswitch: optimize flow compare and mask functionsAndy Zhou
Make sure the sw_flow_key structure and valid mask boundaries are always machine word aligned. Optimize the flow compare and mask operations using machine word size operations. This patch improves throughput on average by 15% when CPU is the bottleneck of forwarding packets. This patch is inspired by ideas and code from a patch submitted by Peter Klausler titled "replace memcmp() with specialized comparator". However, The original patch only optimizes for architectures support unaligned machine word access. This patch optimizes for all architectures. Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-27e1000e: balance semaphore put/get for 82573Steven La
Steven (cc-ed) noticed an imbalance in semaphore put/get for 82573-based NICs. Don't we need something like the following (untested) patch? Signed-off-by: Steven La <sla@riverbed.com> Acked-by: Arthur Kepner <akepner@riverbed.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27Documentation/networking/: Update Intel wired LAN driver documentationJeff Kirsher
Updates the documentation to the Intel wired LAN drivers. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27bna: firmware update to 3.2.1.1Rasesh Mody
This patch updates the firmware to address the thermal notification issue Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27VMXNET3: Add support for virtual IOMMUAndy King
This patch adds support for virtual IOMMU to the vmxnet3 module. We switch to DMA consistent mappings for anything we pass to the device. There were a few places where we already did this, but using pci_blah(); these have been fixed to use dma_blah(), along with all new occurrences where we've replaced kmalloc() and friends. Also fix two small bugs: 1) use after free of rq->buf_info in vmxnet3_rq_destroy() 2) a cpu_to_le32() that should have been a cpu_to_le64() Acked-by: George Zhang <georgezhang@vmware.com> Acked-by: Aditya Sarwade <asarwade@vmware.com> Signed-off-by: Andy King <acking@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27be2net: implement ethtool set/get_channel hooksSathya Perla
Support is provided only for combined channels. When SR-IOV is not enabled, BE3 supports upto 16 channels and Lancer-R/SH-R support upto 32 channels. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27be2net: refactor be_setup() to consolidate queue creation routinesSathya Perla
1) Move be_cmd_if_create() above queue create routines to allow TXQ creation (that requires if_handle) to be clubbed with TX-CQ creation. 2) Consolidate all queue create routines into be_setup_queues() Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27be2net: Fix be_cmd_if_create() to use MBOX if MCCQ is not createdSathya Perla
Currently the IF_CREATE FW cmd is issued only *after* MCCQ is created as it was coded to only use MCCQ. By fixing this, cmd_if_create() can be called before MCCQ is created and the same routine for VF provisioning can be called after. This allows for consolidating all the queue create routines by moving the be_cmd_if_create() call above all queue create calls in be_setup(). Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27be2net: refactor be_get_resources() codeSathya Perla
1) use be_resources{} struct to query/store HW resource limits 2) The HW queue/resource limits for BE2/BE3 chips are mostly called out in driver as constants. Code to handle this is scattered across various places in be_setup(). Consolidate this code into BEx_get_resources(). For Lancer-R, Skyhawk-R, these limits are queried from FW. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27be2net: Fixup profile management routinesVasundhara Volam
1) Parse PCIe descriptor for max-VFs supported by HW 2) Cleanup NIC descriptor parsing in get_func/profile_config() routines 3) Use common struct definitions for v0 and v1 versions of GET_FUNC_CONFIG Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27be2net: use EQ_CREATEv2 for SH-RSathya Perla
EQ_CREATEv2 explicitly returns the msix-index associated with a EQ. For SH-R this is needed if EQs need to be deleted and re-created without resetting a function. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27net: tcp_probe: allow more advanced ingress filtering by markDaniel Borkmann
Currently, the tcp_probe snooper can either filter packets by a given port (handed to the module via module parameter e.g. port=80) or lets all TCP traffic pass (port=0, default). When a port is specified, the port number is tested against the sk's source/destination port. Thus, if one of them matches, the information will be further processed for the log. As this is quite limited, allow for more advanced filtering possibilities which can facilitate debugging/analysis with the help of the tcp_probe snooper. Therefore, similarly as added to BPF machine in commit 7e75f93e ("pkt_sched: ingress socket filter by mark"), add the possibility to use skb->mark as a filter. If the mark is not being used otherwise, this allows ingress filtering by flow (e.g. in order to track updates from only a single flow, or a subset of all flows for a given port) and other things such as dynamic logging and reconfiguration without removing/re-inserting the tcp_probe module, etc. Simple example: insmod net/ipv4/tcp_probe.ko fwmark=8888 full=1 ... iptables -A INPUT -i eth4 -t mangle -p tcp --dport 22 \ --sport 60952 -j MARK --set-mark 8888 [... sampling interval ...] iptables -D INPUT -i eth4 -t mangle -p tcp --dport 22 \ --sport 60952 -j MARK --set-mark 8888 The current option to filter by a given port is still being preserved. A similar approach could be done for the sctp_probe module as a follow-up. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27qlcnic: Update version to 5.3.49.Sucheta Chakraborty
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27qlcnic: dcb: Add support for CEE Netlink interface.Sucheta Chakraborty
o Adapter and driver supports only CEE dcbnl ops. Only GET callbacks within dcbnl ops are supported currently. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27qlcnic: dcb: Register DCB AEN handler.Sucheta Chakraborty
o Adapter sends Asynchronous Event Notifications to the driver when there are changes in the switch or adapter DCBX configuration. AEN handler updates the driver DCBX parameters. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27qlcnic: dcb: Get DCB parameters from the adapter.Sucheta Chakraborty
o Populate driver data structures with local, operational, and peer DCB parameters. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27qlcnic: dcb: Query adapter DCB capabilities.Sucheta Chakraborty
o Query adapter DCB capabilities and populate local data structures with relevant information. o Add QLCNIC_DCB to Kconfig for enabling/disabling DCB. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next Ben Hutchings says: ==================== 1. Refactoring and cleanup in preparation for new hardware support. 2. Some bug fixes for firmware completion handling. (They're not known to cause real problems, otherwise I'd be submitting these for net and stable.) 3. Update to the firmware protocol (MCDI) definitions. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-26openvswitch: Rename key_len to key_endAndy Zhou
Key_end is a better name describing the ending boundary than key_len. Rename those variables to make it less confusing. Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-26openvswitch: Add SCTP supportJoe Stringer
This patch adds support for rewriting SCTP src,dst ports similar to the functionality already available for TCP/UDP. Rewriting SCTP ports is expensive due to double-recalculation of the SCTP checksums; this is performed to ensure that packets traversing OVS with invalid checksums will continue to the destination with any checksum corruption intact. Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: Joe Stringer <joe@wand.net.nz> Signed-off-by: Ben Pfaff <blp@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/wireless/iwlwifi/pcie/trans.c include/linux/inetdevice.h The inetdevice.h conflict involves moving the IPV4_DEVCONF values into a UAPI header, overlapping additions of some new entries. The iwlwifi conflict is a context overlap. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-26Merge branch 'cadence'David S. Miller
Boris BREZILLON says: ==================== net/cadence/macb: add support for dt phy definition This patch series adds support for ethernet phy definition using device tree. This may help in moving some at91 boards to dt (some of them define an interrupt pin). Tested on samad31ek. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-26ARM: at91/dt: define phy available on sama5d3 mother boardBoris BREZILLON
This patch describe the phy used on atmel sama5d3 mother board: - phy address - phy interrupt pin Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-26net/cadence/macb: add support for dt phy definitionBoris BREZILLON
The macb driver only handle PHY description through platform_data (macb_platform_data). Thus, when using dt you cannot define phy properties like phy address or phy irq pin. This patch makes use of the of_mdiobus_register to add support for phy device definition using dt. A fallback to the autoscan procedure is added in case there is no phy devices defined in dt. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-25ipip: potential race in ip_tunnel_init_net()Dan Carpenter
Eric Dumazet says that my previous fix for an ERR_PTR dereference (ea857f28ab 'ipip: dereferencing an ERR_PTR in ip_tunnel_init_net()') could be racy and suggests the following fix instead. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-25bonding: fix error return code in bond_enslave()Wei Yongjun
Fix to return a negative error code in the add bond vlan ids error handling case instead of 0, as done elsewhere in this function. Introduced by commit 1ff412ad7714f6952f76ffd77f0a7f2f563288a1. (bonding: change the bond's vlan syncing functions with the standard ones) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-25Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next Merge SFC driver changes from Ben Hutchings. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-23net: Add NEXTHDR_SCTP to ipv6.hJoe Stringer
Signed-off-by: Joe Stringer <joe@wand.net.nz> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-23openvswitch: Mega flow implementationAndy Zhou
Add wildcarded flow support in kernel datapath. Wildcarded flow can improve OVS flow set up performance by avoid sending matching new flows to the user space program. The exact performance boost will largely dependent on wildcarded flow hit rate. In case all new flows hits wildcard flows, the flow set up rate is within 5% of that of linux bridge module. Pravin has made significant contributions to this patch. Including API clean ups and bug fixes. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-23openvswitch: check CONFIG_OPENVSWITCH_GRE in makefileCong Wang
Cc: Jesse Gross <jesse@nicira.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-23openvswitch: Fix argument descriptions in vport.c.Justin Pettit
Signed-off-by: Justin Pettit <jpettit@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-23openvswitch:: link upper device for port devicesJiri Pirko
Link upper device properly. That will make IFLA_MASTER filled up. Set the master to port 0 of the datapath under which the port belongs. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-23openvswitch: Use non rcu hlist_del() flow table entry.Pravin B Shelar
Flow table destroy is done in rcu call-back context. Therefore there is no need to use rcu variant of hlist_del(). Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-23openvswitch: Use RCU lock for dp dump operation.Pravin B Shelar
RCUfy dp-dump operation which is already read-only. This makes all ovs dump operations lockless. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-23openvswitch: Use RCU lock for flow dump operation.Pravin B Shelar
Flow dump operation is read-only operation. There is no need to take ovs-lock. Following patch use rcu-lock for dumping flows. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Merge networking fixes from David Miller: 1) Revert Johannes Berg's genetlink locking fix, because it causes regressions. Johannes and Pravin Shelar are working on fixing things properly. 2) Do not drop ipv6 ICMP messages without a redirected header option, they are legal. From Duan Jiong. 3) Missing error return propagation in probing of via-ircc driver. From Alexey Khoroshilov. 4) Do not clear out broadcast/multicast/unicast/WOL bits in r8169 when initializing, from Peter Wu. 5) realtek phy driver programs wrong interrupt status bit, from Giuseppe CAVALLARO. 6) Fix statistics regression in AF_PACKET code, from Willem de Bruijn. 7) Bridge code uses wrong bitmap length, from Toshiaki Makita. 8) SFC driver uses wrong indexes to look up MAC filters, from Ben Hutchings. 9) Don't pass stack buffers into usb control operations in hso driver, from Daniel Gimpelevich. 10) Multiple ipv6 fragmentation headers in one packet is illegal and such packets should be dropped, from Hannes Frederic Sowa. 11) When TCP sockets are "repaired" as part of checkpoint/restart, the timestamp field of SKBs need to be refreshed otherwise RTOs can be wildly off. From Andrey Vagin. 12) Fix memcpy args (uses 'address of pointer' instead of 'pointer') in hostp driver. From Dan Carpenter. 13) nl80211hdr_put() doesn't return an ERR_PTR, but some code believes it does. From Dan Carpenter. 14) Fix regression in wireless SME disconnects, from Johannes Berg. 15) Don't use a stack buffer for DMA in zd1201 USB wireless driver, from Jussi Kivilinna. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits) ipv4: expose IPV4_DEVCONF ipv6: handle Redirect ICMP Message with no Redirected Header option be2net: fix disabling TX in be_close() Revert "genetlink: fix family dump race" hso: Fix stack corruption on some architectures hso: Earlier catch of error condition sfc: Fix lookup of default RX MAC filters when steered using ethtool bridge: Use the correct bit length for bitmap functions in the VLAN code packet: restore packet statistics tp_packets to include drops net: phy: rtl8211: fix interrupt on status link change r8169: remember WOL preferences on driver load via-ircc: don't return zero if via_ircc_open() failed macvtap: Ignore tap features when VNET_HDR is off macvtap: Correctly set tap features when IFF_VNET_HDR is disabled. macvtap: simplify usage of tap_features tcp: set timestamps for restored skb-s bnx2x: set VF DMAE when first function has 0 supported VFs bnx2x: Protect against VFs' ndos when SR-IOV is disabled bnx2x: prevent VF benign attentions bnx2x: Consider DCBX remote error ...
2013-08-23Merge branch 'akpm' (patches from Andrew Morton)Linus Torvalds
Merge fixes from Andrew Morton: "A few fixes. One is a licensing change and I don't do licensing, so please eyeball that one" Licensing eye-balled. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: lib/lz4: correct the LZ4 license memcg: get rid of swapaccount leftovers nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP error detection nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP error drivers/platform/olpc/olpc-ec.c: initialise earlier
2013-08-23lib/lz4: correct the LZ4 licenseRichard Laager
The LZ4 code is listed as using the "BSD 2-Clause License". Signed-off-by: Richard Laager <rlaager@wiktel.com> Acked-by: Kyungsik Lee <kyungsik.lee@lge.com> Cc: Chanho Min <chanho.min@lge.com> Cc: Richard Yao <ryao@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ The 2-clause BSD can be just converted into GPL, but that's rude and pointless, so don't do it - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-23memcg: get rid of swapaccount leftoversMichal Hocko
The swapaccount kernel parameter without any values has been removed by commit a2c8990aed5a ("memsw: remove noswapaccount kernel parameter") but it seems that we didn't get rid of all the left overs. Make sure that menuconfig help text and kernel-parameters.txt are clear about value for the paramter and remove the stalled comment which is not very much useful on its own. Signed-off-by: Michal Hocko <mhocko@suse.cz> Reported-by: Gergely Risko <gergely@risko.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-23nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP ↵Vyacheslav Dubeyko
error detection Fix the issue with improper counting number of flying bio requests for BIO_EOPNOTSUPP error detection case. The sb_nbio must be incremented exactly the same number of times as complete() function was called (or will be called) because nilfs_segbuf_wait() will call wail_for_completion() for the number of times set to sb_nbio: do { wait_for_completion(&segbuf->sb_bio_event); } while (--segbuf->sb_nbio > 0); Two functions complete() and wait_for_completion() must be called the same number of times for the same sb_bio_event. Otherwise, wait_for_completion() will hang or leak. Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-23nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP ↵Vyacheslav Dubeyko
error Remove double call of bio_put() in nilfs_end_bio_write() for the case of BIO_EOPNOTSUPP error detection. The issue was found by Dan Carpenter and he suggests first version of the fix too. Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-07-15 20:38:15 +0000