Age | Commit message (Collapse) | Author |
|
-Fix the comment describing the 'start' function, which was a cut/paste
mistake for a different function.
-The comment for DIRECT_REQ and DIRECT_RESP only mentioned AArch32
and listed 32-bit function IDs. Update to include 64-bit.
Signed-off-by: Stuart Yoder <stuart.yoder@arm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Instead of pr_xxx() macro, use dev_xxx() to print log.
This patch changes some error log level to warn log level when
the tpm_crb_ffa secure partition doesn't support properly but
system can run without it.
(i.e) unsupport of direct message ABI or unsupported ABI version
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
For secure partition with multi service, tpm_ffa_crb can access tpm
service with direct message request v2 interface according to chapter 3.3,
TPM Service Command Response Buffer Interface Over FF-A specificationi v1.0 BET.
This patch reflects this spec to access tpm service over
FF-A direct message request v2 ABI.
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The kmalloc failure message is just noise. Remove it and replace -EFAULT
with -ENOMEM as standard for out of memory allocation error returns.
Link: https://lore.kernel.org/linux-integrity/20250430083435.860146-1-colin.i.king@gmail.com/
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Pull smb server fixes from Steve French:
- Fix for rename regression due to the recent VFS lookup changes
- Fix write failure
- locking fix for oplock handling
* tag 'v6.15-rc8-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: use list_first_entry_or_null for opinfo_get_list()
ksmbd: fix rename failure
ksmbd: fix stream write failure
|
|
Add test generic_11 for covering new control command of
UBLK_U_CMD_QUIESCE_DEV.
Add 'quiesce -n dev_id' sub-command on ublk utility for transitioning
device state to quiesce states, then verify the feature via generic_10
by doing quiesce and recovery.
Cc: Yoav Cohen <yoav@nvidia.com>
Link: https://lore.kernel.org/linux-block/DM4PR12MB632807AB7CDCE77D1E5AB7D0A9B92@DM4PR12MB6328.namprd12.prod.outlook.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250522163523.406289-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add feature UBLK_F_QUIESCE, which adds control command `UBLK_U_CMD_QUIESCE_DEV`
for quiescing device, then device state can become `UBLK_S_DEV_QUIESCED`
or `UBLK_S_DEV_FAIL_IO` finally from ublk_ch_release() with ublk server
cooperation.
This feature can help to support to upgrade ublk server application by
shutting down ublk server gracefully, meantime keep ublk block device
persistent during the upgrading period.
The feature is only available for UBLK_F_USER_RECOVERY.
Suggested-by: Yoav Cohen <yoav@nvidia.com>
Link: https://lore.kernel.org/linux-block/DM4PR12MB632807AB7CDCE77D1E5AB7D0A9B92@DM4PR12MB6328.namprd12.prod.outlook.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250522163523.406289-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add test generic_10 for covering new control command of UBLK_U_CMD_UPDATE_SIZE.
Add 'update_size -s|--size size_in_bytes' sub-command on ublk utility for
supporting this feature, then verify the feature via generic_10.
Cc: Omri Mann <omri@nvidia.com>
Cc: Jared Holzman <jholzman@nvidia.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250522163523.406289-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Filesystems like XFS can implement atomic write I/O using either
REQ_ATOMIC flag set in the bio or via CoW operation. It will be useful
if we have a flag in trace events to distinguish between the two. This
patch adds char 'U' (Untorn writes) to rwbs field of the trace events
if REQ_ATOMIC flag is set in the bio.
<W/ REQ_ATOMIC>
=================
xfs_io-4238 [009] ..... 4148.126843: block_rq_issue: 259,0 WFSU 16384 () 768 + 32 none,0,0 [xfs_io]
<idle>-0 [009] d.h1. 4148.129864: block_rq_complete: 259,0 WFSU () 768 + 32 none,0,0 [0]
<W/O REQ_ATOMIC>
===============
xfs_io-4237 [010] ..... 4143.325616: block_rq_issue: 259,0 WS 16384 () 768 + 32 none,0,0 [xfs_io]
<idle>-0 [010] d.H1. 4143.329138: block_rq_complete: 259,0 WS () 768 + 32 none,0,0 [0]
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/44317cb2ec4588f6a2c1501a96684e6a1196e8ba.1747921498.git.ritesh.list@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"A few last minute fixes:
- two driver fixes for samsung/google platforms, both addressing
mistakes in changes from the 6.15 merge window
- a revert for an allwinner devicetree change that caused problems
- a fix for an older regression with the LEDs on Marvell Armada 3720
- a defconfig change to enable chacha20 again after a crypto
subsystem change in 6.15 inadventently turned it off"
* tag 'soc-fixes-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: defconfig: Ensure CRYPTO_CHACHA20_NEON is selected
arm64: dts: marvell: uDPU: define pinctrl state for alarm LEDs
Revert "arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection"
soc: samsung: usi: prevent wrong bits inversion during unconfiguring
firmware: exynos-acpm: check saved RX before bailing out on empty RX queue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
- dell-wmi-sysman: Avoid buffer overflow in current_password_store()
- fujitsu-laptop: Support Lifebook S2110 hotkeys
- intel/pmc: Fix Arrow Lake U/H NPU PCI ID
- think-lmi: Fix attribute name usage for non-compliant items
- thinkpad_acpi: Ignore battery threshold change event notification
* tag 'platform-drivers-x86-v6.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel/pmc: Fix Arrow Lake U/H NPU PCI ID
platform/x86: think-lmi: Fix attribute name usage for non-compliant items
platform/x86: thinkpad_acpi: Ignore battery threshold change event notification
platform/x86: dell-wmi-sysman: Avoid buffer overflow in current_password_store()
platform/x86: fujitsu-laptop: Support Lifebook S2110 hotkeys
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"This contains a small set of fixes for the blocking buffer lookup
conversion done earlier this cycle.
It adds a missing conversion in the getblk slowpath and a few minor
optimizations and cleanups"
* tag 'vfs-6.15-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs/buffer: optimize discard_buffer()
fs/buffer: remove superfluous statements
fs/buffer: avoid redundant lookup in getblk slowpath
fs/buffer: use sleeping lookup in __getblk_slowpath()
|
|
For IORING_URING_CMD_FIXED-less commands io_uring doesn't pull buf_index
from the sqe, so imports might succeed if the index coincide, e.g. when
it's 0, but otherwise it's error prone. Warn if someone tries to import
without the flag.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Link: https://lore.kernel.org/r/a1c2c88e53c3fe96978f23d50c6bc66c2c79c337.1747991070.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
According to commit 8f6116b5b77b ("statmount: add a new supported_mask
field"), STATMOUNT_SUPPORTED macro shall be updated whenever a new flag
is added.
Fixes: 7a54947e727b ("Merge patch series "fs: allow changing idmappings"")
Signed-off-by: "Dmitry V. Levin" <ldv@strace.io>
Link: https://lore.kernel.org/20250511224953.GA17849@strace.io
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In prior kernel versions (5.8-6.8), commit 9f6c61f96f2d9 ("proc/mounts:
add cursor") introduced MNT_CURSOR, a flag used by readers from
/proc/mounts to keep their place while reading the file. Later, commit
2eea9ce4310d8 ("mounts: keep list of mounts in an rbtree") removed this
flag and its value has since been repurposed.
For debuggers iterating over the list of mounts, cursors should be
skipped as they are irrelevant. Detecting whether an element is a cursor
can be difficult. Since the MNT_CURSOR flag is a preprocessor constant,
it's not present in debuginfo, and since its value is repurposed, we
cannot hard-code it. For this specific issue, cursors are possible to
detect in other ways, but ideally, we would be able to read the mount
flag definitions out of the debuginfo. For that reason, convert the
mount flags to an enum.
Link: https://github.com/osandov/drgn/pull/496
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Link: https://lore.kernel.org/20250507223402.2795029-1-stephen.s.brennan@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Not since 8f2918898eb5 "new helpers: vfs_create_mount(), fc_mount()"
back in 2018. Get rid of the dead checks...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/20250421033509.GV2023217@ZenIV
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add some comments in there highlighting a few non-obvious assumptions.
Link: https://lore.kernel.org/20250416-zerknirschen-aluminium-14a55639076f@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Hashed work is serialized by io-wq, intended to be used for cases like
serializing buffered writes to a regular file, where the file system
will serialize the workers anyway with a mutex or similar. Since they
would be forcibly serialized and blocked, it's more efficient for io-wq
to handle these individually rather than issue them in parallel.
If a worker is currently handling a hashed work item and gets blocked,
don't create a new worker if the next work item is also hashed and
mapped to the same bucket. That new worker would not be able to make any
progress anyway.
Reported-by: Fengnan Chang <changfengnan@bytedance.com>
Reported-by: Diangang Li <lidiangang@bytedance.com>
Link: https://lore.kernel.org/io-uring/20250522090909.73212-1-changfengnan@bytedance.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When an io-wq worker goes to sleep, it checks if there's work to do.
If there is, it'll create a new worker. But if this worker is currently
idle, it'll either get woken right back up immediately, or someone
else has already created the necessary worker to handle this work.
Only go through the worker creation logic if the current worker is
currently handling a work item. That means it's being scheduled out as
part of handling that work, not just going to sleep on its own.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just in preparation for using them higher up in the function, move
these generic helpers.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If path->should_be_locked is true, that means user code (of the btree
API) has seen, in this transaction, something guarded by the node this
path has locked, and we have to keep it locked until the end of the
transaction.
Assert that we're not violating this; should_be_locked should also be
cleared only in _very_ special situations.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Simplify the "do we need to keep this locked?" checks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We're adding new should_be_locked assertions: it's going to be illegal
to unlock a should_be_locked path when trans->locked is true.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We're adding new should_be_locked assertions, also add a comment
explaining why clearing should_be_locked is safe here.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Small additional optimization over the previous patch, bringing us
closer to the original behaviour, except when we need to clone to avoid
a transaction restart.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Avoid transaction restarts due to failure to upgrade - we can traverse a
new iterator without a transaction restart.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
btree_path_get_locks, on failure, shouldn't unlock if we're not issuing
a transaction restart: we might drop locks we're not supposed to (if
path->should_be_locked is set).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Small helper to improve locking assertions.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_path_put_nokeep() was intended for paths we wouldn't need to
preserve for a transaction restart - it always frees them right away
when the ref hits 0.
But since paths are shared, freeing unconditionally is a bug, the path
might have been used elsewhere and have should_be_locked set, i.e. we
need to keep it locked until the end of the transaction.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Without this header, the build of the new qat_6xxx driver fails when
CONFIG_PCI_IOV is not set:
In file included from drivers/crypto/intel/qat/qat_common/adf_gen6_shared.c:7:
drivers/crypto/intel/qat/qat_common/adf_gen4_pfvf.h: In function 'adf_gen4_init_pf_pfvf_ops':
drivers/crypto/intel/qat/qat_common/adf_gen4_pfvf.h:13:34: error: 'adf_pfvf_comms_disabled' undeclared (first use in this function)
13 | pfvf_ops->enable_comms = adf_pfvf_comms_disabled;
| ^~~~~~~~~~~~~~~~~~~~~~~
Fixes: 17fd7514ae68 ("crypto: qat - add qat_6xxx driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When two crypto algorithm lookups occur at the same time with
different names for the same algorithm, e.g., ctr(aes-generic)
and ctr(aes), they will both be instantiated. However, only one
of them can be registered. The second instantiation will fail
with EEXIST.
Avoid failing the second lookup by making it retry, but only once
because there are tricky names such as gcm_base(ctr(aes),ghash)
that will always fail, despite triggering instantiation and EEXIST.
Reported-by: Ingo Franzki <ifranzki@linux.ibm.com>
Fixes: 2825982d9d66 ("[CRYPTO] api: Added event notification")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This reverts commit 18c438b228558e05ede7dccf947a6547516fc0c7.
The s390 hmac and sha3 algorithms are failing the test. Revert
the change until they have been fixed.
Reported-by: Ingo Franzki <ifranzki@linux.ibm.com>
Link: https://lore.kernel.org/all/623a7fcb-b4cb-48e6-9833-57ad2b32a252@linux.ibm.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The ARL requires that the GMA and NPU devices both be in D3Hot in order
for PC10 and S0iX to be achieved in S2idle. The original ARL-H/U addition
to the intel_pmc_core driver attempted to do this by switching them to D3
in the init and resume calls of the intel_pmc_core driver.
The problem is the ARL-H/U have a different NPU device and thus are not
being properly set and thus S0iX does not work properly in ARL-H/U. This
patch creates a new ARL-H specific device id that is correct and also
adds the D3 fixup to the suspend callback. This way if the PCI devies
drop from D3 to D0 after resume they can be corrected for the next
suspend. Thus there is no dropout in S0iX.
Fixes: bd820906ea9d ("platform/x86/intel/pmc: Add Arrow Lake U/H support to intel_pmc_core driver")
Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
Link: https://lore.kernel.org/r/a61f78be45c13f39e122dcc684b636f4b21e79a0.1747737446.git.todd.e.brandt@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
For historical reasons mips has to override the socket enum values but
the defines are all the same. So simply move the ARCH_HAS_SOCKET_TYPES
scope.
Fixes: a9194f88782a ("coredump: add coredump socket")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Update to current bspec table.
Bspec: 72574
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://lore.kernel.org/r/20250520195749.371748-1-matthew.s.atwood@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 49c6dc74b5968885f421f9f1b45eb4890b955870)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The mtcfg register is a 32-bit register and should therefore be
accessed using xe_mmio_read32().
Other 3 changes per codestyle suggestion:
"
xe_mmio.c:83: CHECK: Alignment should match open parenthesis
xe_mmio.c:131: CHECK: Comparison to NULL could be written "!xe->mmio.regs"
xe_mmio.c:315: CHECK: line length of 103 exceeds 100 columns
"
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://lore.kernel.org/r/20250513153010.3464767-1-shuicheng.lin@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit d2662cf8f44a68deb6c76ad9f1d9f29dbf7ba601)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Check if all domains are awake specially for
LNCF regs
Fixes: 298661cd9cea ("drm/xe: Fix MOCS debugfs LNCF readout")
Improvements-suggested-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250506142300.1865783-1-tejas.upadhyay@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
(cherry picked from commit a383cf218ef8bb35d4c03958bd956573b65cf778)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Pull bcachefs fixes from Kent Overstreet:
"Small stuff, main ones users will be interested in:
- Couple more casefolding fixes; we can now detect and repair
casefolded dirents in non-casefolded dir and vice versa
- Fix for massive write inflation with mmapped io, which hit certain
databases"
* tag 'bcachefs-2025-05-22' of git://evilpiepirate.org/bcachefs:
bcachefs: Check for casefolded dirents in non casefolded dirs
bcachefs: Fix bch2_dirent_create_snapshot() for casefolding
bcachefs: Fix casefold opt via xattr interface
bcachefs: mkwrite() now only dirties one page
bcachefs: fix extent_has_stripe_ptr()
bcachefs: Fix bch2_btree_path_traverse_cached() when paths realloced
|
|
Get rid of useless `goto`s. No logic changes.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250522084953.412096-1-hsiangkao@linux.alibaba.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
"Core:
- Fix error checking in genpd_dev_pm_attach_by_id()
Providers:
- renesas: Remove obsolete nullify checks for rcar domains"
* tag 'pmdomain-v6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: core: Fix error checking in genpd_dev_pm_attach_by_id()
pmdomain: renesas: rcar: Remove obsolete nullify checks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- sdhci_am654: Fix MMC init failures on am62x boards
- sdhci-of-dwcmshc: Add PD workaround on RK3576 to avoid hang
* tag 'mmc-v6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci_am654: Add SDHCI_QUIRK2_SUPPRESS_V1P8_ENA quirk to am62 compatible
mmc: sdhci-of-dwcmshc: add PD workaround on RK3576
|
|
Pull block fixes from Jens Axboe:
- Fix for a regression with setting up loop on a file system
without ->write_iter()
- Fix for an nvme sysfs regression
* tag 'block-6.15-20250522' of git://git.kernel.dk/linux:
nvme: avoid creating multipath sysfs group under namespace path devices
loop: don't require ->write_iter for writable files in loop_configure
|
|
Pull io_uring fixes from Jens Axboe:
- Kill a duplicate function definition, which can cause linking issues
in certain .config configurations. Introduced in this cycle.
- Fix for a potential overflow CQE reordering issue if a re-schedule is
done during posting. Heading to stable.
- Fix for an issue with recv bundles, where certain conditions can lead
to gaps in the buffers, where a contiguous buffer range was expected.
Heading to stable.
* tag 'io_uring-6.15-20250522' of git://git.kernel.dk/linux:
io_uring/net: only retry recv bundle for a full transfer
io_uring: fix overflow resched cqe reordering
io_uring/cmd: axe duplicate io_uring_cmd_import_fixed_vec() declaration
|
|
Pull smb client fixes from Steve French:
- Two fixes for use after free in readdir code paths
* tag '6.15-rc8-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: Reset all search buffer pointers when releasing buffer
smb: client: Fix use-after-free in cifs_fill_dirent
|
|
We need to delay checksumming the journal write; we don't know the
blocksize until after we allocate the write.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Separate tracepoint message generation and other slowpath code into
non-inline functions, and use bch2_trans_log_str() instead of using a
printbuf for our journal message.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The data update path doesn't need a printbuf for its log message - this
will help reduce stack usage.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Reduce stack usage - bkey_buf has a 96 byte buffer on the stack, but the
btree_trans bump allocator works just fine here.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"This is somewhat larger than what I hoped for, with a few PRs from
subsystems and follow-ups for the recent netdev locking changes,
anyhow there are no known pending regressions.
Including fixes from bluetooth, ipsec and CAN.
Current release - regressions:
- eth: team: grab team lock during team_change_rx_flags
- eth: bnxt_en: fix netdev locking in ULP IRQ functions
Current release - new code bugs:
- xfrm: ipcomp: fix truesize computation on receive
- eth: airoha: fix page recycling in airoha_qdma_rx_process()
Previous releases - regressions:
- sched: hfsc: fix qlen accounting bug when using peek in
hfsc_enqueue()
- mr: consolidate the ipmr_can_free_table() checks.
- bridge: netfilter: fix forwarding of fragmented packets
- xsk: bring back busy polling support in XDP_COPY
- can:
- add missing rcu read protection for procfs content
- kvaser_pciefd: force IRQ edge in case of nested IRQ
Previous releases - always broken:
- xfrm: espintcp: remove encap socket caching to avoid reference leak
- bluetooth: use skb_pull to avoid unsafe access in QCA dump handling
- eth: idpf:
- fix null-ptr-deref in idpf_features_check
- fix idpf_vport_splitq_napi_poll()
- eth: hibmcge: fix wrong ndo.open() after reset fail issue"
* tag 'net-6.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (40 commits)
octeontx2-af: Fix APR entry mapping based on APR_LMT_CFG
octeontx2-af: Set LMT_ENA bit for APR table entries
net/tipc: fix slab-use-after-free Read in tipc_aead_encrypt_done
octeontx2-pf: Avoid adding dcbnl_ops for LBK and SDP vf
selftests/tc-testing: Add an HFSC qlen accounting test
sch_hfsc: Fix qlen accounting bug when using peek in hfsc_enqueue()
idpf: fix idpf_vport_splitq_napi_poll()
net: hibmcge: fix wrong ndo.open() after reset fail issue.
net: hibmcge: fix incorrect statistics update issue
xsk: Bring back busy polling support in XDP_COPY
can: slcan: allow reception of short error messages
net: lan743x: Restore SGMII CTRL register on resume
bnxt_en: Fix netdev locking in ULP IRQ functions
MAINTAINERS: Drop myself to reviewer for ravb driver
net: dwmac-sun8i: Use parsed internal PHY address instead of 1
net: ethernet: ti: am65-cpsw: Lower random mac address error print to info
can: kvaser_pciefd: Continue parsing DMA buf after dropped RX
can: kvaser_pciefd: Fix echo_skb race
can: kvaser_pciefd: Force IRQ edge in case of nested IRQ
idpf: fix null-ptr-deref in idpf_features_check
...
|