summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-09-28brcmfmac: use brcmf_cfg80211_priv to interface with wl_cfg80211 codeArend van Spriel
The low-level driver part interfaces with wl_cfg80211 part using brcmf_cfg80211_dev structure as handle. As brcmf_cfg80211_priv is defined in interface it is more efficient to use that as handle in function calls. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28brcmfmac: get rid of extern keyword in wl_cfg80211.hArend van Spriel
The function declarations in wl_cfg80211.h used the extern keyword but it is redundant as that is implicit so they were removed. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28brcmfmac: notify common driver about usb tx completion.Hante Meuleman
brcmf_usb_tx_complete now calls brcmf_txcomplete to correct eapol counter. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28brcmfmac: use define instead of hardcoded values.Hante Meuleman
brcmf_parse_tlvs was using hardcoded values. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28brcmfmac: use different fw api for encryption,auth. configHante Meuleman
This patch changes the commands being used to configure encryption and authentication. These new methods are needed for when p2p and hostap support are added. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28brcmfmac: use wait_event_timeout for fw control packets over usb.Hante Meuleman
firmware control packets over usb are async acked. This is awaited for by using interruptible wait. This can be interrupted by signal which results in undesirable behavior. Instead wait_event_timeout is used. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28b43legacy: Fix crash on unload when firmware not availableLarry Finger
When b43legacy is loaded without the firmware being available, a following unload generates a kernel NULL pointer dereference BUG as follows: [ 214.330789] BUG: unable to handle kernel NULL pointer dereference at 0000004c [ 214.330997] IP: [<c104c395>] drain_workqueue+0x15/0x170 [ 214.331179] *pde = 00000000 [ 214.331311] Oops: 0000 [#1] SMP [ 214.331471] Modules linked in: b43legacy(-) ssb pcmcia mac80211 cfg80211 af_packet mperf arc4 ppdev sr_mod cdrom sg shpchp yenta_socket pcmcia_rsrc pci_hotplug pcmcia_core battery parport_pc parport floppy container ac button edd autofs4 ohci_hcd ehci_hcd usbcore usb_common thermal processor scsi_dh_rdac scsi_dh_hp_sw scsi_dh_emc scsi_dh_alua scsi_dh fan thermal_sys hwmon ata_generic pata_ali libata [last unloaded: cfg80211] [ 214.333421] Pid: 3639, comm: modprobe Not tainted 3.6.0-rc6-wl+ #163 Source Technology VIC 9921/ALI Based Notebook [ 214.333580] EIP: 0060:[<c104c395>] EFLAGS: 00010246 CPU: 0 [ 214.333687] EIP is at drain_workqueue+0x15/0x170 [ 214.333788] EAX: c162ac40 EBX: cdfb8360 ECX: 0000002a EDX: 00002a2a [ 214.333890] ESI: 00000000 EDI: 00000000 EBP: cd767e7c ESP: cd767e5c [ 214.333957] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 214.333957] CR0: 8005003b CR2: 0000004c CR3: 0c96a000 CR4: 00000090 [ 214.333957] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 214.333957] DR6: ffff0ff0 DR7: 00000400 [ 214.333957] Process modprobe (pid: 3639, ti=cd766000 task=cf802e90 task.ti=cd766000) [ 214.333957] Stack: [ 214.333957] 00000292 cd767e74 c12c5e09 00000296 00000296 cdfb8360 cdfb9220 00000000 [ 214.333957] cd767e90 c104c4fd cdfb8360 cdfb9220 cd682800 cd767ea4 d0c10184 cd682800 [ 214.333957] cd767ea4 cba31064 cd767eb8 d0867908 cba31064 d087e09c cd96f034 cd767ec4 [ 214.333957] Call Trace: [ 214.333957] [<c12c5e09>] ? skb_dequeue+0x49/0x60 [ 214.333957] [<c104c4fd>] destroy_workqueue+0xd/0x150 [ 214.333957] [<d0c10184>] ieee80211_unregister_hw+0xc4/0x100 [mac80211] [ 214.333957] [<d0867908>] b43legacy_remove+0x78/0x80 [b43legacy] [ 214.333957] [<d083654d>] ssb_device_remove+0x1d/0x30 [ssb] [ 214.333957] [<c126f15a>] __device_release_driver+0x5a/0xb0 [ 214.333957] [<c126fb07>] driver_detach+0x87/0x90 [ 214.333957] [<c126ef4c>] bus_remove_driver+0x6c/0xe0 [ 214.333957] [<c1270120>] driver_unregister+0x40/0x70 [ 214.333957] [<d083686b>] ssb_driver_unregister+0xb/0x10 [ssb] [ 214.333957] [<d087c488>] b43legacy_exit+0xd/0xf [b43legacy] [ 214.333957] [<c1089dde>] sys_delete_module+0x14e/0x2b0 [ 214.333957] [<c110a4a7>] ? vfs_write+0xf7/0x150 [ 214.333957] [<c1240050>] ? tty_write_lock+0x50/0x50 [ 214.333957] [<c110a6f8>] ? sys_write+0x38/0x70 [ 214.333957] [<c1397c55>] syscall_call+0x7/0xb [ 214.333957] Code: bc 27 00 00 00 00 a1 74 61 56 c1 55 89 e5 e8 a3 fc ff ff 5d c3 90 55 89 e5 57 56 89 c6 53 b8 40 ac 62 c1 83 ec 14 e8 bb b7 34 00 <8b> 46 4c 8d 50 01 85 c0 89 56 4c 75 03 83 0e 40 80 05 40 ac 62 [ 214.333957] EIP: [<c104c395>] drain_workqueue+0x15/0x170 SS:ESP 0068:cd767e5c [ 214.333957] CR2: 000000000000004c [ 214.341110] ---[ end trace c7e90ec026d875a6 ]---Index: wireless-testing/drivers/net/wireless/b43legacy/main.c The problem is fixed by making certain that the ucode pointer is not NULL before deregistering the driver in mac80211. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [v 3.3.0+] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28ath9k: Enable MCI for AR9565Bala Shanmugam
Signed-off-by: Bala Shanmugam <bkamatch@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28brcmfmac: use kcalloc() to prevent integer overflowDan Carpenter
The multiplication here looks like it could overflow. I've changed it to use kcalloc() to prevent that. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28ath9k: Fix chainmask selection for AR9462Sujith Manoharan
Force chain 1 to be used for CCK rates since the target power table stored in EEPROM is too high to transmit with both chains. This is needed to avoid regulatory violation. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: add inactivity deauth support for apKevin Gan
The firmware has support for this feature, so we offload it to firmware. In start_ap, driver passes the inactivity timeout value to firmware via TLVs and firmware will report STA_DEAUTH event to driver when inactivity timer is fired. Signed-off-by: Kevin Gan <ganhy@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: set txpd when send a mgmt frame for AP and GO modeStone Piao
Set packet type and packet offset in txpd when send a mgmt frame in AP and GO mode. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Kevin Gan <ganhy@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: parse P2P IEs from beacon_dataStone Piao
Parse P2P IEs and set them to FW with related masks. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: add support for P2P GO in interface type changeStone Piao
When cfg80211 calls to change interface type for P2P GO, send P2P mode config commands to firmware and set bss role and bss mode accordingly. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: add support for P2P client in interface type changeStone Piao
When cfg80211 calls to change interface type for P2P client, send P2P mode config commands to firmware. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: add P2P interfaceStone Piao
Due to firmware design, driver needs to add a default P2P interface to implement find phase and action frame handshake. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: send firmware initialization commands synchronouslyStone Piao
The driver will send some commands to firmware during the initialization. Currently these commands are sent asynchronously, which means that we firstly insert all of them to a pre-allocated command queue, and then start to process them one by one. The command queue will soon be exhausted if we keep adding new initialization commands. This issue can be resolved by sending initialization commands synchronously because each command is consumed and the buffer is recycled before queuing next command. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: append each IE into a seperate IE bufferStone Piao
When scan is triggered from cfg80211, the request contains some IEs and we should parse all the IEs and append each IE into a seperate IE buffer. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: process remain on channel expired eventStone Piao
Process remain on channel expired event, and notify cfg80211. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: implement remain_on_channel and cancel_remain_on_channelStone Piao
Add a new command to implement remain_on_channel and cancel_remain_on_channel. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: report received management frames to cfg80211Stone Piao
Process the management frames received from firmware and report them to cfg80211. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Kevin Gan <ganhy@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: implement cfg80211 mgmt_frame_register handlerStone Piao
Add a new command to implement mgmt_frame_register. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: advertise mgmt_stype to cfg80211Stone Piao
Advertise supported management frame types to cfg80211. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: implement cfg80211 mgmt_tx handlerStone Piao
Implement mgmt_tx in cfg80211 ops through data path. Advertise probe resp offload and skip to send probe resp in AP or GO mode. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: fix coding style issueStone Piao
Remove unnecessary blank lines and extra tab. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28ath9k: Add a debugfs file to adjust antenna diversitySujith Manoharan
Location: /<debugfs>/ieee80211/phy#/ath9k/diversity Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28ath9k: Handle errors properly in MCI initializationSujith Manoharan
The MCI initialization path has various points of failures, handle these to ensure that we bail out correctly in such cases. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28ath9k: Fix rx filtering issue for older chipsThomas Wagner
We need to have the promiscuous mode enabled for older chipsets so that the olderchips hardware does not filters out some valid/necessary frames that need to be sent to mac80211. Fix this by enabling promiscus mode for all the chipsets whose macversion <= AR9160 chipsets. This should fix https://bugzilla.kernel.org/show_bug.cgi?id=45591 shafi: made the fix generic by having the frame filtering disabled for chipsets older than AR9280. Cc: Javier Cardona <javier@cozybit.com> Signed-off-by: Thomas Wagner <Thomas.Wagner@hs-rm.de> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28bcma: change delays to follow timers-howto guideRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28Merge branch 'for-linville' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx
2012-09-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David S Miller: 1) Netfilter xt_limit module can use uninitialized rules, from Jan Engelhardt. 2) Wei Yongjun has found several more spots where error pointers were treated as NULL/non-NULL and vice versa. 3) bnx2x was converted to pci_io{,un}map() but one remaining plain iounmap() got missed. From Neil Horman. 4) Due to a fence-post type error in initialization of inetpeer entries (which is where we store the ICMP rate limiting information), we can erroneously drop ICMPs if the inetpeer was created right around when jiffies wraps. Fix from Nicolas Dichtel. 5) smsc75xx resume fix from Steve Glendinnig. 6) LAN87xx smsc chips need an explicit hardware init, from Marek Vasut. 7) qlcnic uses msleep() with locks held, fix from Narendra K. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: netdev: octeon: fix return value check in octeon_mgmt_init_phy() inetpeer: fix token initialization qlcnic: Fix scheduling while atomic bug bnx2: Clean up remaining iounmap net: phy: smsc: Implement PHY config_init for LAN87xx smsc75xx: fix resume after device reset netdev: pasemi: fix return value check in pasemi_mac_phy_init() team: fix return value check l2tp: fix return value check netfilter: xt_limit: have r->cost != 0 case work
2012-09-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "A couple of fixes; one for automount/lazy umount race, another a classic "we don't protect the refcount transition to zero with the lock that protects looking for object in hash" kind of crap in lockd." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: close the race in nlmsvc_free_block() do_add_mount()/umount -l races
2012-09-28Merge branch 'for-linus-3.6-rc-final' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML fixes from Richard Weinberger. * 'for-linus-3.6-rc-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Preinclude include/linux/kern_levels.h um: Fix IPC on um um: kill thread->forking um: let signal_delivered() do SIGTRAP on singlestepping into handler um: don't leak floating point state and segment registers on execve() um: take cleaning singlestep to start_thread()
2012-09-28Merge tag 'dm-3.6-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm Pull dm fixes from Alasdair G Kergon: "A few fixes for problems discovered during the 3.6 cycle. Of particular note, are fixes to the thin target's discard support, which I hope is finally working correctly; and fixes for multipath ioctls and device limits when there are no paths." * tag 'dm-3.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm verity: fix overflow check dm thin: fix discard support for data devices dm thin: tidy discard support dm: retain table limits when swapping to new table with no devices dm table: clear add_random unless all devices have it set dm: handle requests beyond end of device instead of using BUG_ON dm mpath: only retry ioctl when no paths if queue_if_no_path set dm thin: do not set discard_zeroes_data
2012-09-28thp: avoid VM_BUG_ON page_count(page) false positives in ↵Andrea Arcangeli
__collapse_huge_page_copy Speculative cache pagecache lookups can elevate the refcount from under us, so avoid the false positive. If the refcount is < 2 we'll be notified by a VM_BUG_ON in put_page_testzero as there are two put_page(src_page) in a row before returning from this function. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Petr Holasek <pholasek@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-28Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: net/nfc/netlink.c Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28Merge tag 'nfc-next-3.7-2' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-3.0 So says Samuel Ortiz <sameo@linux.intel.com>: The 2nd NFC pull request for 3.7. - A couple of wrong context sleep fixes. - An LLCP rwlock intizialisation fix. - A missing mutex unlocking for pn533. - LLCP raw sockets support. This is going to be used for NFC sniffing. - A build fix for llc_shdlc. It fixes a build error triggered by code that's living in wireless-next. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28netdev: octeon: fix return value check in octeon_mgmt_init_phy()Wei Yongjun
In case of error, the function of_phy_connect() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27Revert "be2net: fix vfs enumeration"David S. Miller
This reverts commit 51af6d7c1f31e0f3d42c87d53657ec7acb6e3462. Breaks the build with CONFIG_PCI_ATS not enabled. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "The three nouveau fixes quiten unneeded dmesg spam that people are seeing and pondering, The udl fix stops it from trying to driver monitors that are too big, where we get a black screen. And a vmware memory alloc problem." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nvc0/fifo: ignore bits in PFIFO_INTR that aren't set in PFIFO_INTR_EN drm/udl: limit modes to the sku pixel limits. vmwgfx: corruption in vmw_event_fence_action_create() drm/nvc0/ltcg: mask off intr 0x10 drm/nouveau: silence a debug message triggered by newer userspace
2012-09-27Merge tag 'usb-3.6-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg Kroah-Hartman: "Here are two USB bugfixes for your 3.6-rc7 tree. The OHCI fix has been reported a number of times and is a regression from 3.5, and the patch that causes the regression was on the way to the -stable trees before I was reminded (again) that this fix needed to get to your tree soon. The host controller bugfix was reported in older kernels as being pretty easy to trigger, and has been tested by Red Hat and their customers. Both have been in the usb-next branch in the -next tree for a while now, I just cherry-picked them out to get to you in time for the 3.6 release. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: Fix race condition when removing host controllers USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq
2012-09-27ALSA: snd-usb: fix next_packet_size calls for pause caseDaniel Mack
Also fix the calls to next_packet_size() for the pause case. This was missed in 245baf983 ("ALSA: snd-usb: fix calls to next_packet_size"). Signed-off-by: Daniel Mack <zonque@gmail.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Reported-and-tested-by: Christian Tefzer <ctrefzer@gmx.de> Cc: stable@kernel.org [ Taking directly because Takashi is on vacation - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-27Merge tag 'asoc-3.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound Pull ASoC update from Mark Brown: "One small and obvious driver-specific fix. Takashi is on vacation now so he asked me to send directly, it's a pretty bad bug with low regression risk." * tag 'asoc-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound: ASoC: wm2000: Correct register size
2012-09-27net: struct napi_struct fields reorderingEric Dumazet
Remove two holes on 64bit arches, and put dev_list at the end of napi_struct since its not used in fast path. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27net: use bigger pages in __netdev_alloc_fragEric Dumazet
We currently use percpu order-0 pages in __netdev_alloc_frag to deliver fragments used by __netdev_alloc_skb() Depending on NIC driver and arch being 32 or 64 bit, it allows a page to be split in several fragments (between 1 and 8), assuming PAGE_SIZE=4096 Switching to bigger pages (32768 bytes for PAGE_SIZE=4096 case) allows : - Better filling of space (the ending hole overhead is less an issue) - Less calls to page allocator or accesses to page->_count - Could allow struct skb_shared_info futures changes without major performance impact. This patch implements a transparent fallback to smaller pages in case of memory pressure. It also uses a standard "struct page_frag" instead of a custom one. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Cc: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27inetpeer: fix token initializationNicolas Dichtel
When jiffies wraps around (for example, 5 minutes after the boot, see INITIAL_JIFFIES) and peer has just been created, now - peer->rate_last can be < XRLIM_BURST_FACTOR * timeout, so token is not set to the maximum value, thus some icmp packets can be unexpectedly dropped. Fix this case by initializing last_rate to 60 seconds in the past. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27qlcnic: Fix scheduling while atomic bugNarendra K
In the device close path, 'qlcnic_fw_destroy_ctx' and 'qlcnic_poll_rsp' call msleep. But 'qlcnic_fw_destroy_ctx' and 'qlcnic_poll_rsp' are called with 'adapter->tx_clean_lock' spin lock held resulting in scheduling while atomic bug causing the following trace. I observed that the commit 012dc19a45b2b9cc2ebd14aaa401cf782c2abba4 from John Fastabend addresses a similar issue in ixgbevf driver. Adopting the same approach used in the commit, this patch uses mdelay to address the issue. [79884.999115] BUG: scheduling while atomic: ip/30846/0x00000002 [79885.005562] INFO: lockdep is turned off. [79885.009958] Modules linked in: qlcnic fuse nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE bnep bluetooth rfkill ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables iptable_nat nf_nat iptable_mangle ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack iptable_filter ip_tables dcdbas coretemp kvm_intel kvm iTCO_wdt ixgbe iTCO_vendor_support crc32c_intel ghash_clmulni_intel nfsd microcode sb_edac pcspkr edac_core dca bnx2x shpchp auth_rpcgss nfs_acl lpc_ich mfd_core mdio lockd libcrc32c wmi acpi_pad acpi_power_meter sunrpc uinput sd_mod sr_mod cdrom crc_t10dif ahci libahci libata megaraid_sas usb_storage dm_mirror dm_region_hash dm_log dm_mod [last unloaded: qlcnic] [79885.083608] Pid: 30846, comm: ip Tainted: G W O 3.6.0-rc7+ #1 [79885.090805] Call Trace: [79885.093569] [<ffffffff816764d8>] __schedule_bug+0x68/0x76 [79885.099699] [<ffffffff8168358e>] __schedule+0x99e/0xa00 [79885.105634] [<ffffffff81683929>] schedule+0x29/0x70 [79885.111186] [<ffffffff81680def>] schedule_timeout+0x16f/0x350 [79885.117724] [<ffffffff811afb7a>] ? init_object+0x4a/0x90 [79885.123770] [<ffffffff8107c190>] ? __internal_add_timer+0x140/0x140 [79885.130873] [<ffffffff81680fee>] schedule_timeout_uninterruptible+0x1e/0x20 [79885.138773] [<ffffffff8107e830>] msleep+0x20/0x30 [79885.144159] [<ffffffffa04c7fbf>] qlcnic_issue_cmd+0xef/0x290 [qlcnic] [79885.151478] [<ffffffffa04c8265>] qlcnic_fw_cmd_destroy_rx_ctx+0x55/0x90 [qlcnic] [79885.159868] [<ffffffffa04c92fd>] qlcnic_fw_destroy_ctx+0x2d/0xa0 [qlcnic] [79885.167576] [<ffffffffa04bf2ed>] __qlcnic_down+0x11d/0x180 [qlcnic] [79885.174708] [<ffffffffa04bf6f8>] qlcnic_close+0x18/0x20 [qlcnic] [79885.181547] [<ffffffff8153b4c5>] __dev_close_many+0x95/0xe0 [79885.187899] [<ffffffff8153b548>] __dev_close+0x38/0x50 [79885.193761] [<ffffffff81545101>] __dev_change_flags+0xa1/0x180 [79885.200419] [<ffffffff81545298>] dev_change_flags+0x28/0x70 [79885.206779] [<ffffffff815531b8>] do_setlink+0x378/0xa00 [79885.212731] [<ffffffff81354fe1>] ? nla_parse+0x31/0xe0 [79885.218612] [<ffffffff815558ee>] rtnl_newlink+0x37e/0x560 [79885.224768] [<ffffffff812cfa19>] ? selinux_capable+0x39/0x50 [79885.231217] [<ffffffff812cbf98>] ? security_capable+0x18/0x20 [79885.237765] [<ffffffff81555114>] rtnetlink_rcv_msg+0x114/0x2f0 [79885.244412] [<ffffffff81551f87>] ? rtnl_lock+0x17/0x20 [79885.250280] [<ffffffff81551f87>] ? rtnl_lock+0x17/0x20 [79885.256148] [<ffffffff81555000>] ? __rtnl_unlock+0x20/0x20 [79885.262413] [<ffffffff81570fc1>] netlink_rcv_skb+0xa1/0xb0 [79885.268661] [<ffffffff81551fb5>] rtnetlink_rcv+0x25/0x40 [79885.274727] [<ffffffff815708bd>] netlink_unicast+0x19d/0x220 [79885.281146] [<ffffffff81570c45>] netlink_sendmsg+0x305/0x3f0 [79885.287595] [<ffffffff8152b188>] ? sock_update_classid+0x148/0x2e0 [79885.294650] [<ffffffff81525c2c>] sock_sendmsg+0xbc/0xf0 [79885.300600] [<ffffffff8152600c>] __sys_sendmsg+0x3ac/0x3c0 [79885.306853] [<ffffffff8109be23>] ? up_read+0x23/0x40 [79885.312510] [<ffffffff816896cc>] ? do_page_fault+0x2bc/0x570 [79885.318968] [<ffffffff81191854>] ? sys_brk+0x44/0x150 [79885.324715] [<ffffffff811c458c>] ? fget_light+0x24c/0x520 [79885.330875] [<ffffffff815286f9>] sys_sendmsg+0x49/0x90 [79885.336707] [<ffffffff8168e429>] system_call_fastpath+0x16/0x1b Signed-off-by: Narendra K <narendra_k@dell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27tcp: Remove unused parameter from tcp_v4_save_optionsChristoph Paasch
struct sock *sk is not used inside tcp_v4_save_options. Thus it can be removed. Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27bnx2: Clean up remaining iounmapNeil Horman
commit c0357e975afdbbedab5c662d19bef865f02adc17 modified bnx2 to switch from using ioremap/iounmap to pci_iomap/pci_iounmap. They missed a spot in the error path of bnx2_init_one though. This patch just cleans that up. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Michael Chan <mcan@broadcom.com> CC: "David S. Miller" <davem@davemloft.net> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27ipv6: gre: remove ip6gre_header_parse()Eric Dumazet
dev_parse_header() callers provide 8 bytes of storage, so it's not possible to store an IPv6 address. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-15 16:42:48 +0000