| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- handle encoded read ioctl returning EAGAIN so it does not mistakenly
free the work structure
- escape subvolume path in mount option list so it cannot be wrongly
parsed when the path contains ","
- remove folio size assertions when writing super block to device with
enabled large folios
* tag 'for-6.15-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: remove folio order ASSERT()s in super block writeback path
btrfs: correctly escape subvol in btrfs_show_options()
btrfs: ioctl: don't free iov when btrfs_encoded_read() returns -EAGAIN
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
- Stable fix adding zero initialization of slab->obj_ext to prevent
crashes with allocation profiling (Suren Baghdasaryan)
* tag 'slab-for-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: ensure slab->obj_exts is clear in a newly allocated slab page
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge amd-pstate content for 6.15 (4/15/25) from Mario Limonciello:
"Add a fix for X3D processors where depending upon what BIOS was
set initially rankings might be set improperly.
Add a fix for changing min/max limits while on the performance
governor."
* tag 'amd-pstate-v6.15-2025-04-15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Enable ITMT support after initializing core rankings
cpufreq/amd-pstate: Fix min_limit perf and freq updation for performance governor
|
|
Since cpufreq_driver_resolve_freq() can run in parallel with
cpufreq_set_policy() and there is no synchronization between them,
the former may access policy->min and policy->max while the latter
is updating them and it may see intermediate values of them due
to the way the update is carried out. Also the compiler is free
to apply any optimizations it wants both to the stores in
cpufreq_set_policy() and to the loads in cpufreq_driver_resolve_freq()
which may result in additional inconsistencies.
To address this, use WRITE_ONCE() when updating policy->min and
policy->max in cpufreq_set_policy() and use READ_ONCE() for reading
them in cpufreq_driver_resolve_freq(). Moreover, rearrange the update
in cpufreq_set_policy() to avoid storing intermediate values in
policy->min and policy->max with the help of the observation that
their new values are expected to be properly ordered upfront.
Also modify cpufreq_driver_resolve_freq() to take the possible reverse
ordering of policy->min and policy->max, which may happen depending on
the ordering of operations when this function and cpufreq_set_policy()
run concurrently, into account by always honoring the max when it
turns out to be less than the min (in case it comes from thermal
throttling or similar).
Fixes: 151717690694 ("cpufreq: Make policy min/max hard requirements")
Cc: 5.16+ <stable@vger.kernel.org> # 5.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/5907080.DvuYhMxLoT@rjwysocki.net
|
|
Notice that ignore_dl_rate_limit() need not piggy back on the
limits_changed handling to achieve its goal (which is to enforce a
frequency update before its due time).
Namely, if sugov_should_update_freq() is updated to check
sg_policy->need_freq_update and return 'true' if it is set when
sg_policy->limits_changed is not set, ignore_dl_rate_limit() may
set the former directly instead of setting the latter, so it can
avoid hitting the memory barrier in sugov_should_update_freq().
Update the code accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/10666429.nUPlyArG6x@rjwysocki.net
|
|
The handling of the limits_changed flag in struct sugov_policy needs to
be explicitly synchronized to ensure that cpufreq policy limits updates
will not be missed in some cases.
Without that synchronization it is theoretically possible that
the limits_changed update in sugov_should_update_freq() will be
reordered with respect to the reads of the policy limits in
cpufreq_driver_resolve_freq() and in that case, if the limits_changed
update in sugov_limits() clobbers the one in sugov_should_update_freq(),
the new policy limits may not take effect for a long time.
Likewise, the limits_changed update in sugov_limits() may theoretically
get reordered with respect to the updates of the policy limits in
cpufreq_set_policy() and if sugov_should_update_freq() runs between
them, the policy limits change may be missed.
To ensure that the above situations will not take place, add memory
barriers preventing the reordering in question from taking place and
add READ_ONCE() and WRITE_ONCE() annotations around all of the
limits_changed flag updates to prevent the compiler from messing up
with that code.
Fixes: 600f5badb78c ("cpufreq: schedutil: Don't skip freq update when limits change")
Cc: 5.3+ <stable@vger.kernel.org> # 5.3+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/3376719.44csPzL39Z@rjwysocki.net
|
|
Commit 8e461a1cb43d ("cpufreq: schedutil: Fix superfluous updates caused
by need_freq_update") modified sugov_should_update_freq() to set the
need_freq_update flag only for drivers with CPUFREQ_NEED_UPDATE_LIMITS
set, but that flag generally needs to be set when the policy limits
change because the driver callback may need to be invoked for the new
limits to take effect.
However, if the return value of cpufreq_driver_resolve_freq() after
applying the new limits is still equal to the previously selected
frequency, the driver callback needs to be invoked only in the case
when CPUFREQ_NEED_UPDATE_LIMITS is set (which means that the driver
specifically wants its callback to be invoked every time the policy
limits change).
Update the code accordingly to avoid missing policy limits changes for
drivers without CPUFREQ_NEED_UPDATE_LIMITS.
Fixes: 8e461a1cb43d ("cpufreq: schedutil: Fix superfluous updates caused by need_freq_update")
Closes: https://lore.kernel.org/lkml/Z_Tlc6Qs-tYpxWYb@linaro.org/
Reported-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/3010358.e9J7NaK4W3@rjwysocki.net
|
|
The QDMA packet scheduler suffers from a performance issue.
Fix this by picking up changes from MediaTek's SDK which change to use
Token Bucket instead of Leaky Bucket and fix the SPEED_1000 configuration.
Fixes: 160d3a9b1929 ("net: ethernet: mtk_eth_soc: introduce MTK_NETSYS_V2 support")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/18040f60f9e2f5855036b75b28c4332a2d2ebdd8.1744764277.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
100Mbps
Without this patch, the maximum weight of the queue limit will be
incorrect when linked at 100Mbps due to an apparent typo.
Fixes: f63959c7eec31 ("net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/74111ba0bdb13743313999ed467ce564e8189006.1744764277.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the current method, the MDC divider was reset to the default setting
of 2.5MHz after the NETSYS SER. Therefore, we need to reapply the MDC
divider configuration function in mtk_hw_init() after reset.
Fixes: c0a440031d431 ("net: ethernet: mtk_eth_soc: set MDIO bus clock frequency")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/8ab7381447e6cdcb317d5b5a6ddd90a1734efcb0.1744764277.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sending exact nr_segs, avoids bio split check and processing in
block layer, which takes around 5%[1] of overall CPU utilization.
In our setup, we see overall improvement of IOPS from 7.15M to 7.65M [2]
and 5% less CPU utilization.
[1]
3.52% io_uring [kernel.kallsyms] [k] bio_split_rw_at
1.42% io_uring [kernel.kallsyms] [k] bio_split_rw
0.62% io_uring [kernel.kallsyms] [k] bio_submit_split
[2]
sudo taskset -c 0,1 ./t/io_uring -b512 -d128 -c32 -s32 -p1 -F1 -B1 -n2
-r4 /dev/nvme0n1 /dev/nvme1n1
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
[Pavel: fixed for kbuf, rebased and reworked on top of cleanups]
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7a1a49a8d053bd617c244291d63dbfbc07afde36.1744882081.git.asml.silence@gmail.com
[axboe: fold in fix factoring in buf reg offset]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fix for net
The following batch contains one Netfilter fix for net:
1) conntrack offload bit is erroneously unset in a race scenario,
from Florian Westphal.
netfilter pull request 25-04-17
* tag 'nf-25-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: conntrack: fix erronous removal of offload bit
====================
Link: https://patch.msgid.link/20250417102847.16640-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
io_import_fixed is a mess. Even though we know the final len of the
iterator, we still assign offset + len and do some magic after to
correct for that.
Do offset calculation first and finalise it with iov_iter_bvec at the
end.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2d5107fed24f8b23245ef2ede9a5a7f7c426df61.1744882081.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Kernel registered buffers are special because segments are not uniform
in size, and we have a bunch of optimisations based on that uniformity
for normal buffers. Handle kbuf separately, it'll be cleaner this way.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4e9e5990b0ab5aee723c0be5cd9b5bcf810375f9.1744882081.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Don't optimise for requests with offset=0. Large registered buffers are
the preference and hence the user is likely to pass an offset, and the
adjustments are not expensive and will be made even cheaper in following
patches.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1c2beb20470ee3c886a363d4d8340d3790db19f3.1744882081.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
From PMU's perspective, Panther Lake is similar to the previous
generation Lunar Lake. Both are hybrid platforms, with e-core and
p-core.
The key differences are the ARCH PEBS feature and several new events.
The ARCH PEBS is supported in the following patches.
The new events will be supported later in perf tool.
Share the code path with the Lunar Lake. Only update the name.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20250415114428.341182-2-dapeng1.mi@linux.intel.com
|
|
Currently when a user samples user space GPRs (--user-regs option) with
PEBS, the user space GPRs actually always come from software PMI
instead of from PEBS hardware. This leads to the sampled GPRs to
possibly be inaccurate for single PEBS record case because of the
skid between counter overflow and GPRs sampling on PMI.
For the large PEBS case, it is even worse. If user sets the
exclude_kernel attribute, large PEBS would be used to sample user space
GPRs, but since PEBS GPRs group is not really enabled, it leads to all
samples in the large PEBS record to share the same piece of user space
GPRs, like this reproducer shows:
$ perf record -e branches:pu --user-regs=ip,ax -c 100000 ./foo
$ perf report -D | grep "AX"
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
So enable GPRs group for user space GPRs sampling and prioritize reading
GPRs from PEBS. If the PEBS sampled GPRs is not user space GPRs (single
PEBS record case), perf_sample_regs_user() modifies them to user space
GPRs.
[ mingo: Clarified the changelog. ]
Fixes: c22497f5838c ("perf/x86/intel: Support adaptive PEBS v4")
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250415104135.318169-2-dapeng1.mi@linux.intel.com
|
|
The below code would always unconditionally clear other status bits like
perf metrics overflow bit once PEBS buffer overflows:
status &= intel_ctrl | GLOBAL_STATUS_TRACE_TOPAPMI;
This is incorrect. Perf metrics overflow bit should be cleared only when
fixed counter 3 in PEBS counter group. Otherwise perf metrics overflow
could be missed to handle.
Closes: https://lore.kernel.org/all/20250225110012.GK31462@noisy.programming.kicks-ass.net/
Fixes: 7b2c05a15d29 ("perf/x86/intel: Generic support for hardware TopDown metrics")
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250415104135.318169-1-dapeng1.mi@linux.intel.com
|
|
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.15
- fix scan failure for non-ANA multipath controllers (Hannes Reinecke)
- fix multipath sysfs links creation for some cases (Hannes Reinecke)
- PCIe endpoint fixes (Damien Le Moal)
- use NULL instead of 0 in the auth code (Damien Le Moal)"
* tag 'nvme-6.15-2025-04-17' of git://git.infradead.org/nvme:
nvmet: pci-epf: cleanup link state management
nvmet: pci-epf: clear CC and CSTS when disabling the controller
nvmet: pci-epf: always fully initialize completion entries
nvmet: auth: use NULL to clear a pointer in nvmet_auth_sq_free()
nvme-multipath: sysfs links may not be created for devices
nvme: fixup scan failure for non-ANA multipath controllers
|
|
Add check for the return value of spi_imx_setupxfer().
spi_imx->rx and spi_imx->tx function pointer can be NULL when
spi_imx_setupxfer() return error, and make NULL pointer dereference.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Call trace:
0x0
spi_imx_pio_transfer+0x50/0xd8
spi_imx_transfer_one+0x18c/0x858
spi_transfer_one_message+0x43c/0x790
__spi_pump_transfer_message+0x238/0x5d4
__spi_sync+0x2b0/0x454
spi_write_then_read+0x11c/0x200
Signed-off-by: Tamura Dai <kirinode0@gmail.com>
Reviewed-by: Carlos Song <carlos.song@nxp.com>
Link: https://patch.msgid.link/20250417011700.14436-1-kirinode0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- l2cap: Process valid commands in too long frame
- vhci: Avoid needless snprintf() calls
* tag 'for-net-2025-04-16' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: vhci: Avoid needless snprintf() calls
Bluetooth: l2cap: Process valid commands in too long frame
====================
Link: https://patch.msgid.link/20250416210126.2034212-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The scale of IIO bandwidth in free running counters is inherited from
the ICX. The counter increments for every 32 bytes rather than 4 bytes.
The IIO bandwidth out free running counters don't increment with a
consistent size. The increment depends on the requested size. It's
impossible to find a fixed increment. Remove it from the event_descs.
Fixes: 0378c93a92e2 ("perf/x86/intel/uncore: Support IIO free-running counters on Sapphire Rapids server")
Reported-by: Tang Jun <dukang.tj@alibaba-inc.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250416142426.3933977-3-kan.liang@linux.intel.com
|
|
There was a mistake in the ICX uncore spec too. The counter increments
for every 32 bytes rather than 4 bytes.
The same as SNR, there are 1 ioclk and 8 IIO bandwidth in free running
counters. Reuse the snr_uncore_iio_freerunning_events().
Fixes: 2b3b76b5ec67 ("perf/x86/intel/uncore: Add Ice Lake server uncore support")
Reported-by: Tang Jun <dukang.tj@alibaba-inc.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250416142426.3933977-2-kan.liang@linux.intel.com
|
|
There was a mistake in the SNR uncore spec. The counter increments for
every 32 bytes of data sent from the IO agent to the SOC, not 4 bytes
which was documented in the spec.
The event list has been updated:
"EventName": "UNC_IIO_BANDWIDTH_IN.PART0_FREERUN",
"BriefDescription": "Free running counter that increments for every 32
bytes of data sent from the IO agent to the SOC",
Update the scale of the IIO bandwidth in free running counters as well.
Fixes: 210cc5f9db7a ("perf/x86/intel/uncore: Add uncore support for Snow Ridge server")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250416142426.3933977-1-kan.liang@linux.intel.com
|
|
Meghana Malladi says:
====================
Bug fixes from XDP and perout series
This patch series consists of bug fixes from the XDP series:
1. Fixes a kernel warning that occurs when bringing down the
network interface.
2. Resolves a potential NULL pointer dereference in the
emac_xmit_xdp_frame() function.
3. Resolves a potential NULL pointer dereference in the
icss_iep_perout_enable() function
v3: https://lore.kernel.org/all/20250328102403.2626974-1-m-malladi@ti.com/
====================
Link: https://patch.msgid.link/20250415090543.717991-1-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ICSS IEP driver tracks perout and pps enable state with flags.
Currently when disabling pps and perout signals during icss_iep_exit(),
results in NULL pointer dereference for perout.
To fix the null pointer dereference issue, the icss_iep_perout_enable_hw
function can be modified to directly clear the IEP CMP registers when
disabling PPS or PEROUT, without referencing the ptp_perout_request
structure, as its contents are irrelevant in this case.
Fixes: 9b115361248d ("net: ti: icssg-prueth: Fix clearing of IEP_CMP_CFG registers during iep_init")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/7b1c7c36-363a-4085-b26c-4f210bee1df6@stanley.mountain/
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250415090543.717991-4-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
emac_xmit_xdp_frame()
There is an error check inside emac_xmit_xdp_frame() function which
is called when the driver wants to transmit XDP frame, to check if
the allocated tx descriptor is NULL, if true to exit and return
ICSSG_XDP_CONSUMED implying failure in transmission.
In this case trying to free a descriptor which is NULL will result
in kernel crash due to NULL pointer dereference. Fix this error handling
and increase netdev tx_dropped stats in the caller of this function
if the function returns ICSSG_XDP_CONSUMED.
Fixes: 62aa3246f462 ("net: ti: icssg-prueth: Add XDP support")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/70d8dd76-0c76-42fc-8611-9884937c82f5@stanley.mountain/
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250415090543.717991-3-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
During network interface initialization, the NIC driver needs to register
its Rx queue with the XDP, to ensure the incoming XDP buffer carries a
pointer reference to this info and is stored inside xdp_rxq_info.
While this struct isn't tied to XDP prog, if there are any changes in
Rx queue, the NIC driver needs to stop the Rx queue by unregistering
with XDP before purging and reallocating memory. Drop page_pool destroy
during Rx channel reset as this is already handled by XDP during
xdp_rxq_info_unreg (Rx queue unregister), failing to do will cause the
following warning:
warning logs: https://gist.github.com/MeghanaMalladiTI/eb627e5dc8de24e42d7d46572c13e576
Fixes: 46eeb90f03e0 ("net: ti: icssg-prueth: Use page_pool API for RX buffer allocation")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250415090543.717991-2-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The blamed commit exposes a possible issue with flow_offload_teardown():
We might remove the offload bit of a conntrack entry that has been
offloaded again.
1. conntrack entry c1 is offloaded via flow f1 (f1->ct == c1).
2. f1 times out and is pushed back to slowpath, c1 offload bit is
removed. Due to bug, f1 is not unlinked from rhashtable right away.
3. a new packet arrives for the flow and re-offload is triggered, i.e.
f2->ct == c1. This is because lookup in flowtable skip entries with
teardown bit set.
4. Next flowtable gc cycle finds f1 again
5. flow_offload_teardown() is called again for f1 and c1 offload bit is
removed again, even though we have f2 referencing the same entry.
This is harmless, but clearly not correct.
Fix the bug that exposes this: set 'teardown = true' to have the gc
callback unlink the flowtable entry from the table right away instead of
the unintentional defer to the next round.
Also prevent flow_offload_teardown() from fixing up the ct state more than
once: We could also be called from the data path or a notifier, not only
from the flowtable gc callback.
NF_FLOW_TEARDOWN can never be unset, so we can use it as synchronization
point: if we observe did not see a 0 -> 1 transition, then another CPU
is already doing the ct state fixups for us.
Fixes: 03428ca5cee9 ("netfilter: conntrack: rework offload nf_conn timeout extension logic")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Currently bdex_statx is only called from the very high-level
vfs_statx_path function, and thus bypassing it for in-kernel calls
to vfs_getattr or vfs_getattr_nosec.
This breaks querying the block ѕize of the underlying device in the
loop driver and also is a pitfall for any other new kernel caller.
Move the call into the lowest level helper to ensure all callers get
the right results.
Fixes: 2d985f8c6b91 ("vfs: support STATX_DIOALIGN on block devices")
Fixes: f4774e92aab8 ("loop: take the file system minimum dio alignment into account")
Reported-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/20250417064042.712140-1-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
GCC 15's new -Wunterminated-string-initialization notices that the
character lookup tables "fscache_cache_states" and "fscache_cookie_states"
(which are not used as a C-String) need to be marked as "nonstring":
fs/netfs/fscache_cache.c:375:67: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (6 chars into 5 available) [-Wunterminated-string-initialization]
375 | static const char fscache_cache_states[NR__FSCACHE_CACHE_STATE] = "-PAEW";
| ^~~~~~~
fs/netfs/fscache_cookie.c:32:69: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (11 chars into 10 available) [-Wunterminated-string-initialization]
32 | static const char fscache_cookie_states[FSCACHE_COOKIE_STATE__NR] = "-LCAIFUWRD";
| ^~~~~~~~~~~~
Annotate the arrays.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/20250416221654.work.028-kees@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Fix an off-by-one error when setting the vblanking start in
<VBLKSTR>. Commit d6460bd52c27 ("drm/mgag200: Add dedicated
variables for blanking fields") switched the value from
crtc_vdisplay to crtc_vblank_start, which DRM helpers copy
from the former. The commit missed to subtract one though.
Reported-by: Wakko Warner <wakko@animx.eu.org>
Closes: https://lore.kernel.org/dri-devel/CAMwc25rKPKooaSp85zDq2eh-9q4UPZD=RqSDBRp1fAagDnmRmA@mail.gmail.com/
Reported-by: Сергей <afmerlord@gmail.com>
Closes: https://lore.kernel.org/all/5b193b75-40b1-4342-a16a-ae9fc62f245a@gmail.com/
Closes: https://bbs.archlinux.org/viewtopic.php?id=303819
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: d6460bd52c27 ("drm/mgag200: Add dedicated variables for blanking fields")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.12+
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Wakko Warner <wakko@animx.eu.org>
Link: https://lore.kernel.org/r/20250416083847.51764-1-tzimmermann@suse.de
|
|
Avoid an edge case where epoll_wait arms a timer and calls schedule()
even if the timer will expire immediately.
For example: if the user has specified an epoll busy poll usecs which is
equal or larger than the epoll_wait/epoll_pwait2 timeout, it is
unnecessary to call schedule_hrtimeout_range; the busy poll usecs have
consumed the entire timeout duration so it is unnecessary to induce
scheduling latency by calling schedule() (via schedule_hrtimeout_range).
This can be measured using a simple bpftrace script:
tracepoint:sched:sched_switch
/ args->prev_pid == $1 /
{
print(kstack());
print(ustack());
}
Before this patch is applied:
Testing an epoll_wait app with busy poll usecs set to 1000, and
epoll_wait timeout set to 1ms using the script above shows:
__traceiter_sched_switch+69
__schedule+1495
schedule+32
schedule_hrtimeout_range+159
do_epoll_wait+1424
__x64_sys_epoll_wait+97
do_syscall_64+95
entry_SYSCALL_64_after_hwframe+118
epoll_wait+82
Which is unexpected; the busy poll usecs should have consumed the
entire timeout and there should be no reason to arm a timer.
After this patch is applied: the same test scenario does not generate a
call to schedule() in the above edge case. If the busy poll usecs are
reduced (for example usecs: 100, epoll_wait timeout 1ms) the timer is
armed as expected.
Fixes: bf3b9f6372c4 ("epoll: Add busy poll support to epoll with socket fds.")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Link: https://lore.kernel.org/20250416185826.26375-1-jdamato@fastly.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Test struct drm_gem_object.import_attach to detect imported objects.
During object clenanup, the dma_buf field might be NULL. Testing it in
an object's free callback then incorrectly does a cleanup as for native
objects. Happens for calls to drm_mode_destroy_dumb_ioctl() that
clears the dma_buf field in drm_gem_object_exported_dma_buf_free().
v3:
- only test for import_attach (Boris)
v2:
- use import_attach.dmabuf instead of dma_buf (Christian)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: b57aa47d39e9 ("drm/gem: Test for imported GEM buffers with helper")
Reported-by: Andy Yan <andyshrk@163.com>
Closes: https://lore.kernel.org/dri-devel/38d09d34.4354.196379aa560.Coremail.andyshrk@163.com/
Tested-by: Andy Yan <andyshrk@163.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Anusha Srivatsa <asrivats@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250416065820.26076-1-tzimmermann@suse.de
|
|
Document the lifetime, nolifetime and max_open_zones mount options
added for zoned rt file systems.
Also add documentation describing the max_open_zones sysfs attribute
exposed in /sys/fs/xfs/<dev>/zoned/
Fixes: 4e4d52075577 ("xfs: add the zoned space allocator")
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux into block-6.15
Pull MD fixes from Yu:
"- fix raid10 missing discard IO accounting (Yu Kuai)
- fix bitmap stats for bitmap file (Zheng Qixing)
- fix oops while reading all member disks failed during check/repair
(Meir Elisha)"
* tag 'md-6.15-20250416' of https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux:
md/raid1: Add check for missing source disk in process_checks()
md/md-bitmap: fix stats collection for external bitmaps
md/raid10: fix missing discard IO accounting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"31 hotfixes.
9 are cc:stable and the remainder address post-6.15 issues or aren't
considered necessary for -stable kernels.
22 patches are for MM, 9 are otherwise"
* tag 'mm-hotfixes-stable-2025-04-16-19-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
MAINTAINERS: update HUGETLB reviewers
mm: fix apply_to_existing_page_range()
selftests/mm: fix compiler -Wmaybe-uninitialized warning
alloc_tag: handle incomplete bulk allocations in vm_module_tags_populate
mailmap: add entry for Jean-Michel Hautbois
mm: (un)track_pfn_copy() fix + doc improvements
mm: fix filemap_get_folios_contig returning batches of identical folios
mm/hugetlb: add a line break at the end of the format string
selftests: mincore: fix tmpfs mincore test failure
mm/hugetlb: fix set_max_huge_pages() when there are surplus pages
mm/cma: report base address of single range correctly
mm: page_alloc: speed up fallbacks in rmqueue_bulk()
kunit: slub: add module description
mm/kasan: add module decription
ucs2_string: add module description
zlib: add module description
fpga: tests: add module descriptions
samples/livepatch: add module descriptions
ASN.1: add module description
mm/vma: add give_up_on_oom option on modify/merge, use in uffd release
...
|
|
Add one simple fault inject target, and verify if an application using ublk
device sees an I/O error quickly after the ublk server dies.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250416035444.99569-9-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now ublk_abort_queue() is moved to ublk char device release handler,
meantime our request queue is "quiesced" because either ->canceling was
set from uring_cmd cancel function or all IOs are inflight and can't be
completed by ublk server, things becomes easy much:
- all uring_cmd are done, so we needn't to mark io as UBLK_IO_FLAG_ABORTED
for handling completion from uring_cmd
- ublk char device is closed, no one can hold IO request reference any more,
so we can simply complete this request or requeue it for ublk_nosrv_should_reissue_outstanding.
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250416035444.99569-8-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove __ublk_quiesce_dev() and open code for updating device state as
QUIESCED.
We needn't to drain inflight requests in __ublk_quiesce_dev() any more,
because all inflight requests are aborted in ublk char device release
handler.
Also we needn't to set ->canceling in __ublk_quiesce_dev() any more
because it is done unconditionally now in ublk_ch_release().
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250416035444.99569-7-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There are currently two ways in which ublk server exit is detected by
ublk_drv:
1. uring_cmd cancellation. If there are any outstanding uring_cmds which
have not been completed to the ublk server when it exits, io_uring
calls the uring_cmd callback with a special cancellation flag as the
issuing task is exiting.
2. I/O timeout. This is needed in addition to the above to handle the
"saturated queue" case, when all I/Os for a given queue are in the
ublk server, and therefore there are no outstanding uring_cmds to
cancel when the ublk server exits.
There are a couple of issues with this approach:
- It is complex and inelegant to have two methods to detect the same
condition
- The second method detects ublk server exit only after a long delay
(~30s, the default timeout assigned by the block layer). This delays
the nosrv behavior from kicking in and potential subsequent recovery
of the device.
The second issue is brought to light with the new test_generic_06 which
will be added in following patch. It fails before this fix:
selftests: ublk: test_generic_06.sh
dev id is 0
dd: error writing '/dev/ublkb0': Input/output error
1+0 records in
0+0 records out
0 bytes copied, 30.0611 s, 0.0 kB/s
DEAD
dd took 31 seconds to exit (>= 5s tolerance)!
generic_06 : [FAIL]
Fix this by instead detecting and handling ublk server exit in the
character file release callback. This has several advantages:
- This one place can handle both saturated and unsaturated queues. Thus,
it replaces both preexisting methods of detecting ublk server exit.
- It runs quickly on ublk server exit - there is no 30s delay.
- It starts the process of removing task references in ublk_drv. This is
needed if we want to relax restrictions in the driver like letting
only one thread serve each queue
There is also the disadvantage that the character file release callback
can also be triggered by intentional close of the file, which is a
significant behavior change. Preexisting ublk servers (libublksrv) are
dependent on the ability to open/close the file multiple times. To
address this, only transition to a nosrv state if the file is released
while the ublk device is live. This allows for programs to open/close
the file multiple times during setup. It is still a behavior change if a
ublk server decides to close/reopen the file while the device is LIVE
(i.e. while it is responsible for serving I/O), but that would be highly
unusual. This behavior is in line with what is done by FUSE, which is
very similar to ublk in that a userspace daemon is providing services
traditionally provided by the kernel.
With this change in, the new test (and all other selftests, and all
ublksrv tests) pass:
selftests: ublk: test_generic_06.sh
dev id is 0
dd: error writing '/dev/ublkb0': Input/output error
1+0 records in
0+0 records out
0 bytes copied, 0.0376731 s, 0.0 kB/s
DEAD
generic_04 : [PASS]
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250416035444.99569-6-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk_ch_release() is called after ublk char device is closed, when all
uring_cmd are done, so it is perfect fine to move ublk device reset to
ublk_ch_release() from ublk_ctrl_start_recovery().
This way can avoid to grab the exiting daemon task_struct too long.
However, reset of the following ublk IO flags has to be moved until ublk
io_uring queues are ready:
- ubq->canceling
For requeuing IO in case of ublk_nosrv_dev_should_queue_io() before device
is recovered
- ubq->fail_io
For failing IO in case of UBLK_F_USER_RECOVERY_FAIL_IO before device is
recovered
- ublk_io->flags
For preventing using io->cmd
With this way, recovery is simplified a lot.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250416035444.99569-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now ublk deals with ublk_nosrv_dev_should_queue_io() by keeping request
queue as quiesced. This way is fragile because queue quiesce crosses syscalls
or process contexts.
Switch to rely on ubq->canceling for dealing with
ublk_nosrv_dev_should_queue_io(), because it has been used for this purpose
during io_uring context exiting, and it can be reused before recovering too.
In ublk_queue_rq(), the request will be added to requeue list without
kicking off requeue in case of ubq->canceling, and finally requests added in
requeue list will be dispatched from either ublk_stop_dev() or
ublk_ctrl_end_recovery().
Meantime we have to move reset of ubq->canceling from ublk_ctrl_start_recovery()
to ublk_ctrl_end_recovery(), when IO handling can be recovered completely.
Then blk_mq_quiesce_queue() and blk_mq_unquiesce_queue() are always used
in same context.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Link: https://lore.kernel.org/r/20250416035444.99569-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add ublk_force_abort_dev() for handling ublk_nosrv_dev_should_queue_io()
in ublk_stop_dev(). Then queue quiesce and unquiesce can be paired in
single function.
Meantime not change device state to QUIESCED any more, since the disk is
going to be removed soon.
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250416035444.99569-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Most uring_cmds issued against ublk character devices are serialized
because each command affects only one queue, and there is an early check
which only allows a single task (the queue's ubq_daemon) to issue
uring_cmds against that queue. However, this mechanism does not work for
FETCH_REQs, since they are expected before ubq_daemon is set. Since
FETCH_REQs are only used at initialization and not in the fast path,
serialize them using the per-ublk-device mutex. This fixes a number of
data races that were previously possible if a badly behaved ublk server
decided to issue multiple FETCH_REQs against the same qid/tag
concurrently.
Reported-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250416035444.99569-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
test may exit early because of missing program or not having required
feature before calling _prep_test(), then $UBLK_TMP isn't cleaned.
Fix it by moving creating $UBLK_TMP into _prep_test(), any resources
created since _prep_test() will be cleaned by _cleanup_test().
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250412023035.2649275-14-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add test_stress_05.sh for covering removing device with recovery
enabled.
io-hang has been observed with the following patch:
https://lore.kernel.org/linux-block/20250403-ublk_timeout-v3-1-aa09f76c7451@purestorage.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250412023035.2649275-13-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add user recovery feature.
Meantime add user recovery test: generic_04 and generic_05(zero copy)
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250412023035.2649275-12-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Support target specific command line for making related command line code
handling more readable & clean.
Also helps for adding new features.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250412023035.2649275-11-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Increase max nr_queues to 32, and queue depth to 1024.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250412023035.2649275-10-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
