summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-11-12mlxsw: spectrum_router: Introduce fib_entry priv for low-level opsJiri Pirko
Prepare for the low-level ops that need to store some data alongside the fib_entry and introduce a per-fib_entry priv for ll ops. The priv is reference counted as in the follow-up patch it is going to be saved in pack() function and used later on in commit() even in case the related fib_entry gets freed in the middle. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12mlxsw: spectrum_router: Have FIB entry op context allocated for the instanceJiri Pirko
Get the max size needed for FIB entry op context and allocate it once for the instance. Use it repeatedly from the scheduled work. By this, allow to extend the context to hold more data than it is wise to do when it was on the stack. Make sure to signalize that the context needs to be initialized in case families of subsequent FIB entries differ. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12mlxsw: spectrum_router: Prepare work context for possible bulkingJiri Pirko
For XMDR register it is possible to carry multiple FIB entry operations in a single write. However the FW does not restrict mixing the types of operations, make the code easier and indicate the bulking is ok only in case the bulk contains FIB operations of the same family and event. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12mlxsw: spectrum: Push RALUE packing and writing into low-level router opsJiri Pirko
With follow-up introduction of XM implementation, XMDR register is going to be optionally used instead of RALUE register. Push the RALUE packing helpers and write call into low-level router ops. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12mlxsw: spectrum_router: Use RALUE pack helper from abort functionJiri Pirko
Unify the RALUE register payload packing and use the __mlxsw_sp_fib_entry_ralue_pack() helper from __mlxsw_sp_router_set_abort_trap(). Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12mlxsw: reg: Allow to pass NULL pointer to mlxsw_reg_ralue_pack4/6()Jiri Pirko
In preparation for the change that is going to be done in the next patch, allow to pass NULL pointer to mlxsw_reg_ralue_pack4() and mlxsw_reg_ralue_pack6() helpers. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12mlxsw: spectrum_router: Pass destination IP as a pointer to ↵Jiri Pirko
mlxsw_reg_ralue_pack4() Instead of passing destination IP as a u32 value, pass it as pointer to u32. Avoid using local variable for the pointer store. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12mlxsw: spectrum: Export RALUE pack helper and use it from IPIPJiri Pirko
As the RALUE packing is going to be put into op, make the user from IPIP code use the same helper as the router code does. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12mlxsw: spectrum_router: Push out RALUE pack into separate helperJiri Pirko
As the RALUE packing is going to be pushed into an op, in preparation for that push the code into a separate function in the meantime. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12mlxsw: spectrum: Propagate context from work handler containing RALUE payloadJiri Pirko
Currently, RALUE payload is defined locally in the function that is calling the register write. With introduction of alternative register to RALUE, XMDR, it has to be possible to put multiple FIB entry operations into single register write. So in order to prepare for that, have per-work entry operation context and propagate it all the way down to the functions writing RALUE. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12mlxsw: spectrum_router: Introduce FIB event queue instead of separate worksJiri Pirko
Currently, every FIB event is queued-up as a separate work to be processed. However, that allows to process only one FIB entry per work callback. In preparation of future XMDR register bulking of multiple FIB entries, convert to FIB event queue. Implement this by a list_head, adding new events to the end of the list in the FIB notify callback. That allows to process multiple events from the list inside the work callback. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12mlxsw: spectrum_router: Use RALUE-independent op argJiri Pirko
Since the write/delete of FIB entry is going to be implemented by XMDR register for XM implementation, introduce RALUE-independent enum for op so the enum could be used in both RALUE and XMDR. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12mlxsw: spectrum_router: Pass non-register proto enum to ↵Jiri Pirko
__mlxsw_sp_router_set_abort_trap() Don't pass RALXX register enum and rather pass enum mlxsw_sp_l3proto to __mlxsw_sp_router_set_abort_trap(). This is in preparation to fib entry pack implementation by XMDR register. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12net: kcov: don't select SKB_EXTENSIONS when there is no NETRandy Dunlap
Fix kconfig warning when CONFIG_NET is not set/enabled: WARNING: unmet direct dependencies detected for SKB_EXTENSIONS Depends on [n]: NET [=n] Selected by [y]: - KCOV [=y] && ARCH_HAS_KCOV [=y] && (CC_HAS_SANCOV_TRACE_PC [=y] || GCC_PLUGINS [=n]) Fixes: 6370cc3bbd8a ("net: add kcov handle to skb extensions") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Aleksandr Nogikh <nogikh@google.com> Cc: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20201110175746.11437-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12Merge branch ↵Jakub Kicinski
'net-switch-further-drivers-to-core-functionality-for-handling-per-cpu-byte-packet-counters' Heiner Kallweit says: ==================== net: switch further drivers to core functionality for handling per-cpu byte/packet counters Switch further drivers to core functionality for handling per-cpu byte/packet counters. All changes are compile-tested only. ==================== Link: https://lore.kernel.org/r/5fbe3a1f-6625-eadc-b1c9-f76f78debb94@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12net: usb: switch to dev_get_tstats64 and remove usbnet_get_stats64 aliasHeiner Kallweit
Replace usbnet_get_stats64() with new identical core function dev_get_tstats64() in all users and remove usbnet_get_stats64(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12usbnet: switch to core handling of rx/tx byte/packet countersHeiner Kallweit
Use netdev->tstats instead of a member of usbnet for storing a pointer to the per-cpu counters. This allows us to use core functionality for statistics handling. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12qtnfmac: switch to core handling of rx/tx byte/packet countersHeiner Kallweit
Use netdev->tstats instead of a member of qtnf_vif for storing a pointer to the per-cpu counters. This allows us to use core functionality for statistics handling. The driver sets netdev->needs_free_netdev, therefore freeing the per-cpu counters at the right point in time is a little bit tricky. Best option seems to be to use the ndo_init/ndo_uninit callbacks. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12qmi_wwan: switch to core handling of rx/tx byte/packet countersHeiner Kallweit
Use netdev->tstats instead of a member of qmimux_priv for storing a pointer to the per-cpu counters. This allows us to use core functionality for statistics handling. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12IB/hfi1: switch to core handling of rx/tx byte/packet countersHeiner Kallweit
Use netdev->tstats instead of a member of hfi1_ipoib_dev_priv for storing a pointer to the per-cpu counters. This allows us to use core functionality for statistics handling. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12net: ipconfig: Avoid spurious blank lines in boot logThierry Reding
When dumping the name and NTP servers advertised by DHCP, a blank line is emitted if either of the lists is empty. This can lead to confusing issues such as the blank line getting flagged as warning. This happens because the blank line is the result of pr_cont("\n") and that may see its level corrupted by some other driver concurrently writing to the console. Fix this by making sure that the terminating newline is only emitted if at least one entry in the lists was printed before. Reported-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20201110073757.1284594-1-thierry.reding@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12Merge branch 'smsc-w-1-warning-fixes'Jakub Kicinski
Andrew Lunn says: ==================== smsc W=1 warning fixes Fixup various W=1 warnings, and then add COMPILE_TEST support, which explains why these where missed on the previous pass. v2: Use while (0) Rework buffer alignment to make it clearer v3: Access the length from the hardware and Use __always_unused to tell the compiler we want to discard the value. ==================== Link: https://lore.kernel.org/r/20201110030248.1480413-1-andrew@lunn.ch Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12drivers: net: smsc: Add COMPILE_TEST supportAndrew Lunn
Improve the build testing of these SMSC drivers by enabling them when COMPILE_TEST is selected. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12drivers: net: smc911x: Fix cast from pointer to integer of different sizeAndrew Lunn
drivers/net/ethernet/smsc/smc911x.c: In function ‘smc911x_hardware_send_pkt’: drivers/net/ethernet/smsc/smc911x.c:471:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 471 | cmdA = (((u32)skb->data & 0x3) << 16) | When built on 64bit targets, the skb->data pointer cannot be cast to a u32 in a meaningful way. Use uintptr_t instead. Suggested-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12drivers: net: smc911x: Fix passing wrong number of parameters to DBG() macroAndrew Lunn
Now that the compiler always sees the parameters passed to the DBG() macro, it gives an error message about wrong parameters. The comment says it all: /* ndev is not valid yet, so avoid passing it in. */ DBG(SMC_DEBUG_FUNC, "--> %s\n", __func__); You cannot not just pass a parameter! The DBG does not seem to have any real value, to just remove it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12drivers: net: smc911x: Fix set but unused status because of DBG macroAndrew Lunn
drivers/net/ethernet/smsc/smc911x.c: In function ‘smc911x_timeout’: drivers/net/ethernet/smsc/smc911x.c:1251:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] 1251 | int status, mask; The status is read in order to print it via the DBG macro. However, due to the way DBG is disabled, the compiler never sees it being used. Change the DBG macro to actually make use of the passed parameters, and the leave the optimiser to remove the unwanted code inside the while (0). Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12drivers: net: smc911x: Work around set but unused statusAndrew Lunn
drivers/net/ethernet/smsc/smc911x.c: In function ‘smc911x_phy_interrupt’: drivers/net/ethernet/smsc/smc911x.c:976:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] 976 | int status; A comment indicates the status needs to be read from the PHY, otherwise bad things happen. But due to the macro magic, it is hard to perform the read without assigning it to a variable. So add _always_unused attribute to status to tell the compiler we don't expect to use the value. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12drivers: net: smc91x: Fix missing kerneldoc reported by W=1Andrew Lunn
drivers/net/ethernet/smsc/smc91x.c:2199: warning: Function parameter or member 'dev' not described in 'try_toggle_control_gpio' drivers/net/ethernet/smsc/smc91x.c:2199: warning: Function parameter or member 'desc' not described in 'try_toggle_control_gpio' drivers/net/ethernet/smsc/smc91x.c:2199: warning: Function parameter or member 'name' not described in 'try_toggle_control_gpio' drivers/net/ethernet/smsc/smc91x.c:2199: warning: Function parameter or member 'index' not described in 'try_toggle_control_gpio' drivers/net/ethernet/smsc/smc91x.c:2199: warning: Function parameter or member 'value' not described in 'try_toggle_control_gpio' drivers/net/ethernet/smsc/smc91x.c:2199: warning: Function parameter or member 'nsdelay' not described in 'try_toggle_control_gpio' Document these parameters. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12drivers: net: smc91x: Fix set but unused W=1 warningAndrew Lunn
drivers/net/ethernet/smsc/smc91x.c:706:51: warning: variable ‘pkt_len’ set but not used [-Wunused-but-set-variable] 706 | unsigned int saved_packet, packet_no, tx_status, pkt_len; The read of the packet length in the descriptor probably needs to be kept in order to keep the hardware happy. So tell the compiler we don't expect to use the value by using the __always_unused attribute. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12net: udp: remove redundant initialization in udp_gro_completeMenglong Dong
The initialization for 'err' with '-ENOSYS' is redundant and can be removed, as it is updated soon and not used. Changes since v1: - Move the err declaration below struct sock *sk Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn> Link: https://lore.kernel.org/r/5faa01d5.1c69fb81.8451c.cb5b@mx.google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12Merge branch 'xilinx_emaclite-w-1-fixes'Jakub Kicinski
Andrew Lunn says: ==================== xilinx_emaclite W=1 fixes kerneldoc, pointer issues, and add COMPILE_TEST support to easy finding future issues via build testing. v2: - Use uintptr_t instead of long - Added Acked-by's. ==================== Link: https://lore.kernel.org/r/20201110024024.1479741-1-andrew@lunn.ch Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12drivers: net: xilinx_emaclite: Add COMPILE_TEST supportAndrew Lunn
To improve build testing of this driver, add COMPILE_TEST support. Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12drivers: net: xilinx_emaclite: Fix -Wpointer-to-int-cast warnings with W=1Andrew Lunn
drivers/net/ethernet//xilinx/xilinx_emaclite.c:341:35: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 341 | addr = (void __iomem __force *)((u32 __force)addr ^ Use uintptr_t instead of u32 to avoid problems on 64 bit systems. Also, cast the address to an unsigned long for printing. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12drivers: net: xilinx_emaclite: Add missing parameter kerneldocAndrew Lunn
The txqueue parameter to the watchdog callback is unused in this driver. But it still needs to be documented. Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12nfp: Fix passing zero to 'PTR_ERR'YueHaibing
nfp_cpp_from_nfp6000_pcie() returns ERR_PTR() and never returns NULL. The NULL test should be removed, also return correct err. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Link: https://lore.kernel.org/r/20201112145852.6580-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12Merge branch 'selftests-pmtu-sh-improve-the-test-result-processing'Jakub Kicinski
Po-Hsu Lin says: ==================== selftests: pmtu.sh: improve the test result processing The pmtu.sh test script treats all non-zero return code as a failure, thus it will be marked as FAILED when some sub-test got skipped. This patchset will: 1. Use the kselftest framework skip code $ksft_skip to replace the hardcoded SKIP return code. 2. Improve the result processing, the test will be marked as PASSED if nothing goes wrong and not all the tests were skipped. ==================== Link: https://lore.kernel.org/r/20201110020049.6705-1-po-hsu.lin@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12selftests: pmtu.sh: improve the test result processingPo-Hsu Lin
This test will treat all non-zero return codes as failures, it will make the pmtu.sh test script being marked as FAILED when some sub-test got skipped. Improve the result processing by * Only mark the whole test script as SKIP when all of the sub-tests were skipped * If the sub-tests were either passed or skipped, the overall result will be PASS * If any of them has failed with return code 1 or anything bad happened (e.g. return code 127 for command not found), the overall result will be FAIL Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12selftests: pmtu.sh: use $ksft_skip for skipped return codePo-Hsu Lin
This test uses return code 2 as a hard-coded skipped state, let's use the kselftest framework skip code variable $ksft_skip instead to make it more readable and easier to maintain. Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12mptcp: fix static checker warnings in mptcp_pm_add_timerGeliang Tang
Fix the following Smatch complaint: net/mptcp/pm_netlink.c:213 mptcp_pm_add_timer() warn: variable dereferenced before check 'msk' (see line 208) net/mptcp/pm_netlink.c 207 struct mptcp_sock *msk = entry->sock; 208 struct sock *sk = (struct sock *)msk; 209 struct net *net = sock_net(sk); ^^ "msk" dereferenced here. 210 211 pr_debug("msk=%p", msk); 212 213 if (!msk) ^^^^ Too late. 214 return; 215 Fixes: 93f323b9cccc ("mptcp: add a new sysctl add_addr_timeout") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Link: https://lore.kernel.org/r/078a2ef5bdc4e3b2c25ef852461692001f426495.1604976945.git.geliangtang@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11net: dsa: mv88e6xxx: Add helper to get a chip's max_vidTobias Waldekranz
Most of the other chip info constants have helpers to get at them; add one for max_vid to keep things consistent. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201110185720.18228-1-tobias@waldekranz.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11ipv4: Set nexthop flags in a more consistent wayIdo Schimmel
Be more consistent about the way in which the nexthop flags are set and set them in one go. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20201110102553.1924232-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11drivers: net: sky2: Fix -Wstringop-truncation with W=1Andrew Lunn
In function ‘strncpy’, inlined from ‘sky2_name’ at drivers/net/ethernet/marvell/sky2.c:4903:3, inlined from ‘sky2_probe’ at drivers/net/ethernet/marvell/sky2.c:5049:2: ./include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ specified bound 16 equals destination size [-Wstringop-truncation] None of the device names are 16 characters long, so it was never an issue. But replace the strncpy with an snprintf() to prevent the theoretical overflow. Suggested-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Link: https://lore.kernel.org/r/20201110023222.1479398-1-andrew@lunn.ch Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11MAINTAINERS: Add entry for Hirschmann Hellcreek Switch DriverKurt Kanzenbach
Add myself to cover the Hirschmann Hellcreek TSN Ethernet Switch Driver. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20201110071829.7467-1-kurt@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11Merge branch 'net-evaluate-net-ipvX-conf-all-sysctls'Jakub Kicinski
Vincent Bernat says: ==================== net: evaluate net.ipvX.conf.all.* sysctls Some per-interface sysctls are ignoring the "all" variant. This patchset fixes some of them when such a sysctl is handled as a boolean. This includes: - net.ipvX.conf.all.disable_policy - net.ipvX.conf.all.disable_policy.disable_xfrm - net.ipv4.conf.all.proxy_arp_pvlan - net.ipvX.conf.all.ignore_routes_with_linkdown Two sysctls are still ignoring the "all" variant as it wouldn't make much sense for them: - net.ipv4.conf.all.tag - net.ipv4.conf.all.medium_id Ideally, the "all" variant should be removed, but there is no simple alternative to DEVINET_SYSCTL_* macros that would allow one to not expose and "all" entry. ==================== Link: https://lore.kernel.org/r/20201107193515.1469030-1-vincent@bernat.ch Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11net: evaluate net.ipvX.conf.all.disable_policy and disable_xfrmVincent Bernat
The disable_policy and disable_xfrm are a per-interface sysctl to disable IPsec policy or encryption on an interface. However, while a "all" variant is exposed, it was a noop since it was never evaluated. We use the usual "or" logic for this kind of sysctls. Signed-off-by: Vincent Bernat <vincent@bernat.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11net: evaluate net.ipv4.conf.all.proxy_arp_pvlanVincent Bernat
Introduced in 65324144b50b, the "proxy_arp_vlan" sysctl is a per-interface sysctl to tune proxy ARP support for private VLANs. While the "all" variant is exposed, it was a noop and never evaluated. We use the usual "or" logic for this kind of sysctls. Fixes: 65324144b50b ("net: RFC3069, private VLAN proxy arp support") Signed-off-by: Vincent Bernat <vincent@bernat.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11net: evaluate net.ipvX.conf.all.ignore_routes_with_linkdownVincent Bernat
Introduced in 0eeb075fad73, the "ignore_routes_with_linkdown" sysctl ignores a route whose interface is down. It is provided as a per-interface sysctl. However, while a "all" variant is exposed, it was a noop since it was never evaluated. We use the usual "or" logic for this kind of sysctls. Tested with: ip link add type veth # veth0 + veth1 ip link add type veth # veth1 + veth2 ip link set up dev veth0 ip link set up dev veth1 # link-status paired with veth0 ip link set up dev veth2 ip link set up dev veth3 # link-status paired with veth2 # First available path ip -4 addr add 203.0.113.${uts#H}/24 dev veth0 ip -6 addr add 2001:db8:1::${uts#H}/64 dev veth0 # Second available path ip -4 addr add 192.0.2.${uts#H}/24 dev veth2 ip -6 addr add 2001:db8:2::${uts#H}/64 dev veth2 # More specific route through first path ip -4 route add 198.51.100.0/25 via 203.0.113.254 # via veth0 ip -6 route add 2001:db8:3::/56 via 2001:db8:1::ff # via veth0 # Less specific route through second path ip -4 route add 198.51.100.0/24 via 192.0.2.254 # via veth2 ip -6 route add 2001:db8:3::/48 via 2001:db8:2::ff # via veth2 # H1: enable on "all" # H2: enable on "veth0" for v in ipv4 ipv6; do case $uts in H1) sysctl -qw net.${v}.conf.all.ignore_routes_with_linkdown=1 ;; H2) sysctl -qw net.${v}.conf.veth0.ignore_routes_with_linkdown=1 ;; esac done set -xe # When veth0 is up, best route is through veth0 ip -o route get 198.51.100.1 | grep -Fw veth0 ip -o route get 2001:db8:3::1 | grep -Fw veth0 # When veth0 is down, best route should be through veth2 on H1/H2, # but on veth0 on H2 ip link set down dev veth1 # down veth0 ip route show [ $uts != H3 ] || ip -o route get 198.51.100.1 | grep -Fw veth0 [ $uts != H3 ] || ip -o route get 2001:db8:3::1 | grep -Fw veth0 [ $uts = H3 ] || ip -o route get 198.51.100.1 | grep -Fw veth2 [ $uts = H3 ] || ip -o route get 2001:db8:3::1 | grep -Fw veth2 Without this patch, the two last lines would fail on H1 (the one using the "all" sysctl). With the patch, everything succeeds as expected. Also document the sysctl in `ip-sysctl.rst`. Fixes: 0eeb075fad73 ("net: ipv4 sysctl option to ignore routes when nexthop link is down") Signed-off-by: Vincent Bernat <vincent@bernat.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11Merge branch 'net-qrtr-add-distant-node-support'Jakub Kicinski
Loic Poulain says: ==================== net: qrtr: Add distant node support QRTR protocol allows a node to communicate with an other non-immediate node via an intermdediate immediate node acting as a 'bridge': node-0 <=> node-1 <=> node-2 This is currently not supported in this upstream version and this series aim to fix that. This series is V2 because changes 1, 2 and 3 have already been submitted separately on LKML. Changes in v2: - Add reviewed-by tags from Bjorn and Mani - Fixing checkpatch issue reported by Jakub ==================== Link: https://lore.kernel.org/r/1604684010-24090-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11net: qrtr: Release distant nodes along the bridge nodeLoic Poulain
Distant QRTR nodes can be accessed via an other node that acts as a bridge. When the a QRTR endpoint associated to a bridge node is released, all the linked distant nodes should also be released. This patch fixes endpoint release by: - Submitting QRTR BYE message locally on behalf of all the nodes accessible through the endpoint. - Removing all the routable node IDs from radix tree pointing to the released node endpoint. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11net: qrtr: Add GFP flags parameter to qrtr_alloc_ctrl_packetLoic Poulain
This will be requested for allocating control packet in atomic context. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-15 14:11:37 +0000