summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-09-04arm64: dts: rockchip: rk3588s fix sdio pins to pull upAlex Zhao
The sdio requires the cmd and data pins to pull up by soc. Signed-off-by: Alex Zhao <zzc@rock-chips.com> [adapted to pinctrl filename change] Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20240829204517.398669-2-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-09-04arm64: dts: rockchip: Add RGA2 support to rk3588Jianfeng Liu
RK3588 also features a RGA2 block. Add the necessary device tree node. Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com> Tested-by: Tim Surber <me@timsurber.de> Link: https://lore.kernel.org/r/20240831182424.758816-2-liujianfeng1994@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-09-04arm64: dts: rockchip: Add missing tshut props to tsadc on quartz64-bDiederik de Haas
Add the missing TSADC properties `rockchip,hw-tshut-mode` and `rockchip,hw-tshut-polarity` to the Pine64 Quartz64 Model B. This fixes the following warnings: rockchip-thermal fe710000.tsadc: Missing tshut mode property, using default (gpio) rockchip-thermal fe710000.tsadc: Missing tshut-polarity property, using default (low) Signed-off-by: Diederik de Haas <didi.debian@cknow.org> Link: https://lore.kernel.org/r/20240831112949.60091-1-didi.debian@cknow.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-09-04arm64: dts: rockchip: Add Hardkernel ODROID-M2Jonas Karlman
The Hardkernel ODROID-M2 is a single-board computer based on Rockchip RK3588S2 SoC. It features e.g. 8/16 GB LPDDR5 RAM, 64 GB eMMC, SD-card, GbE LAN, HDMI 2.0, M.2 NVMe and USB 2.0/3.0/Type-C. Add initial support for eMMC, SD-card, Ethernet, PCIe and USB. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20240901112020.3224704-3-jonas@kwiboo.se Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-09-04dt-bindings: arm: rockchip: Add Hardkernel ODROID-M2Jonas Karlman
The Hardkernel ODROID-M2 is a single-board computer based on Rockchip RK3588S2 SoC. It features e.g. 8/16 GB LPDDR5 RAM, 64 GB eMMC, SD-card, GbE LAN, HDMI 2.0, M.2 NVMe and USB 2.0/3.0/Type-C. Add devicetree binding documentation for the Hardkernel ODROID-M2 board. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240901112020.3224704-2-jonas@kwiboo.se Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-09-04arm64: dts: rockchip: drop hp-pin-name property from audio card on nanopc-t6Heiko Stuebner
The audio-card contains a hp-pin-name property that is not part of the binding, and its contents also are just a "Headphones" string. So that property also does not fullfill any specific use, therefore just drop it. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20240830203819.1972536-4-heiko@sntech.de
2024-09-04arm64: dts: allwinner: a64: Add GPU thermal trips to the SoC dtsiDragan Simic
Add thermal trips for the two GPU thermal sensors found in the Allwinner A64. There's only one GPU OPP defined since the commit 1428f0c19f9c ("arm64: dts: allwinner: a64: Run GPU at 432 MHz"), so defining only the critical thermal trips makes sense for the A64's two GPU thermal zones. Having these critical thermal trips defined ensures that no hot spots develop inside the SoC die that exceed the maximum junction temperature. That might have been possible before, although quite unlikely, because the CPU and GPU portions of the SoC are packed closely inside the SoC, so the overheating GPU would inevitably result in the heat soaking into the CPU portion of the SoC, causing the CPU thermal sensor to return high readings and trigger the CPU critical thermal trips. However, it's better not to rely on the heat soak and have the critical GPU thermal trips properly defined instead. Signed-off-by: Dragan Simic <dsimic@manjaro.org> Tested-by: Norayr Chilingarian <norayr@arnet.am> Link: https://lore.kernel.org/r/0a6110a7b27a050bd58ab3663087eecd8e873ac0.1724126053.git.dsimic@manjaro.org Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2024-09-04arm64: dts: allwinner: h700: Add charger for Anbernic RG35XXChris Morgan
Add the necessary nodes for the AXP717 to allow for monitoring the USB and battery charger. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20240821215456.962564-16-macroalpha82@gmail.com Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2024-09-04arm64: dts: imx: rename gpio hog as <gpio name>-hogFrank Li
Rename admin_led_lower to admin-led-lower-hog. Rename gpio rs485_en as rs485-en-hog. Rename gpio uart4_rs485_en to uart4-rs485-en-hog. Fix below warning: arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dtb: gpio@76: 'admin_led_lower' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtb: gpio@30230000: 'rs485_en' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtb: gpio@30220000: 'uart4_rs485_en' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+' Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: imx8mp-var-som-symphony: Add Variscite Symphony board and ↵Tarang Raval
VAR-SOM-MX8MP SoM Adds the DTSI file for the Variscite VAR-SOM-MX8MP System on Module which is delivered with the Variscite Symphony Evaluation Kit. Initial support includes: - Serial console - eMMC - SD card Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: imx8mm-var-som: drop unused top-level compatibleKrzysztof Kozlowski
The Variscite VAR-SOM-MX8MM System-on-Module cannot be used alone without motherboard, so drop the top-level compatible field to avoid any false impression that such usage is possible. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: ls1088ardb: add new RTC PCF2131 supportJoy Zou
Add RTC PCF2131 node for new ls1088ardb board.. Signed-off-by: Joy Zou <joy.zou@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: colibri-imx8x: Cleanup commentsJoão Paulo Gonçalves
Remove unnecessary comments. The Colibri-iMX8X doesn't support FlexCAN, and the GPU is already enabled in the SOC dtsi. Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: colibri-imx8x: Add 50mhz clock for ethPhilippe Schenker
Change enet0_lpcg to get the clock value needed in Colibri-iMX8X for 100mbps ethernet. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: colibri-imx8x: Add adma_pwmJoão Paulo Gonçalves
Add adma_pwm node for Colibri-iMX8X carrier boards. Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: colibri-imx8x: Add vpu supportJoão Paulo Gonçalves
Enable VPU on Colibri-iMX8X. Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: colibri-imx8x: Add USB3803 HUBFrancesco Dolcini
Add USB3803 HUB, this is required for Bluetooth and USB functionalities. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: colibri-imx8x: Add PMIC thermal zoneFrancesco Dolcini
Add PMIC thermal zones. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: colibri-imx8x: Add sound cardJoão Paulo Gonçalves
Add audio support for Colibri-iMX8X sound card. Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: colibri-imx8x: Add fxl6408 gpio expanderFrancesco Dolcini
Add fxl6408 gpio expander, this is required for Wi-Fi, Bluetooth and USB functionalities. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: colibri-imx8x: Add analog inputsJoão Paulo Gonçalves
Add adc nodes for analog inputs support for all Colibri-iMX8X carrier boards. Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: colibri-imx8x: Add usb supportEmanuele Ghidoli
Add USB HOST and OTG support to Colibri-iMX8X carrier boards. Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: imx8qm-mek: add usb 3.0 and related type C nodesFrank Li
Enable usb3.0 and related usb type C nodes. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: imx8qm-mek: add i2c in mipi[0,1] subsystemFrank Li
Add i2c node in mipi[0,1] subystem for imx8qm-mek. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: imx8qm-mek: add pwm and i2c in lvds subsystemFrank Li
Add pwm[0,1] and i2c[0,1] in lvds subsystem. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: imx8qm-mek: add cm4 remote-proc and related memory regionFrank Li
Add two cm4 remote-proc and related memory regions. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: imx8qm: add mipi subsystemFrank Li
Include common imx8-ss-mipi0.dtsi and imx8-ss-mipi1.dtsi. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: imx8: add basic mipi subsystemFrank Li
Add basic mipi subsystem for imx8qm and imx8qxp. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: imx8qm: add lvds subsystemFrank Li
Add irqsteer, pwm and i2c in lvds subsystem. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: imx8: add basic lvds0 and lvds1 subsystemFrank Li
Add basic lvds0 and lvds1 subsystem for imx8qm an imx8qxp. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: imx95: Add NETCMIX block control supportWei Fang
Add NETCMIX block control support. Signed-off-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: freescale: rename gw7905 to gw75xxTim Harvey
The GW7905 was renamed to GW7500 before production release. While we typically do not change compatibles, the GW7905 was never released before its product name was changed to a GW7500. The use the the 'xx' wildcard is to denote the fact that this device-tree can support range of board models from GW7500 to GW7599 as has been done historically with the Gateworks baseboards to support various build customizatoins based on the same PCB. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: imx93-11x11-evk: Add PWM backlight for "LVDS" connectorLiu Ying
J702 on i.MX93 11x11 EVK base board is a 40-pin connector labelled "LVDS". This connector supports PWM backlight with default 12V power supply and ADP5585 PWM controller. Add support for the backlight. Signed-off-by: Liu Ying <victor.liu@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: imx8mp-phyboard-pollux-rdk: Add support for PCIeBenjamin Hahn
Add support for the Mini PCIe slot. Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de> Reviewed-by: Yannic Moog <y.moog@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: imx8mp-evk: Add native HDMI outputLiu Ying
J17 on i.MX8mp EVK base board is a HDMI type A connector. It connects with i.MX8mp HDMI PHY. Add support for it. Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: imx8m: update spdif sound card node propertiesElinor Montmasson
The merge of imx-spdif driver into fsl-asoc-card brought new DT properties that can be used with the "fsl,imx-audio-spdif" compatible: * The "spdif-controller" property from imx-spdif is named "audio-cpu" in fsl-asoc-card. * fsl-asoc-card uses codecs explicitly declared in DT with "audio-codec". With an S/PDIF, codec drivers spdif_transmitter and spdif_receiver should be used. Driver imx-spdif used instead the dummy codec and a pair of boolean properties, "spdif-in" and "spdif-out". While backward compatibility is kept to support properties "spdif-controller", "spdif-in" and "spdif-out", using new properties has several benefits: * "audio-cpu" and "audio-codec" are more generic names reflecting that the fsl-asoc-card driver supports multiple hardware. They are properties already used by devices using the fsl-asoc-card driver. They are also similar to properties of simple-card: "cpu" and "codec". * "spdif-in" and "spdif-out" imply the use of the dummy codec in the driver. However, there are already two codec drivers for the S/PDIF, spdif_transmitter and spdif_receiver. It is better to declare S/PDIF Tx and Rx devices in a DT, and then reference them with "audio-codec" than using the dummy codec. For those reasons, this commit updates in-tree DTs to use the new properties: * Rename "spdif-controller" property to "audio-cpu". * Declare S/PDIF transmitter and/or receiver devices, and use them with the "audio-codec" property instead of "spdif-out" and/or "spdif-in". These modifications were tested only on an imx8mn-evk board. Note that out-of-tree and old DTs are still supported. Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: imx8mp-beacon: Enable DW HDMI BridgeAdam Ford
There is a second HDMI connector on the baseboard which is routed to the DW HDMI bridge through the PVI to the LCDIF3 and requires the HDMI PHY to be enabled too. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: imx8mm-beacon-kit: add DVDD-supply and DOVDD-supplyFrank Li
According to binding doc, DVDD-supply and DOVDD-supply is required properties. Add these to fix below warning: arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dtb: camera@10: 'DVDD-supply' is a required proper Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: s32v234: remove fallback compatible string arm,cortex-a9-gicFrank Li
Remove fallback comaptible string arm,cortex-a9-gic to fix below warning: /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/s32v234-evb.dtb: interrupt-controller@7d001000: compatible: 'oneOf' conditional failed, one must be fixed: ['arm,cortex-a15-gic', 'arm,cortex-a9-gic'] is too long /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/s32v234-evb.dtb: interrupt-controller@7d001000: compatible: 'oneOf' conditional failed, one must be fixed: ['arm,cortex-a15-gic', 'arm,cortex-a9-gic'] is too long 'nvidia,tegra210-agic' was expected 'arm,cortex-a15-gic' is not one of ['nvidia,tegra186-agic', 'nvidia,tegra194-agic', 'nvidia,tegra234-agic'] 'arm,gic-400' was expected Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: fsl-ls1088a-ten64: change to low case hex valueFrank Li
Change to low case for hex value to fix below warning: arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dtb: flash@0: partitions: Unevaluated properties are not allowed ('partition@5C0000' was unexpected) Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: imx8mp-venice: add vddl and vana for sensor@10Frank Li
Add vddl and vana for sensor@10 to fix below warning: arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtb: sensor@10: 'VANA-supply' is a required property Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: fsl-lx2160a-tqmlx2160a: change "vcc" to "vdd" for hub*Frank Li
According to binging doc usb/ti,usb8041.yaml and in drivers/usb/misc/onboard_usb_dev.h ti_tusb8041_data = { .supply_names = { "vdd" },}; It should vdd-supply instead vcc-supply. Fixes: 04b77e0124ef ("arm64: dts: freescale: add fsl-lx2160a-mblx2160a board") Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: imx8mm-venice-gw7902(3): add #address-cells for gsc@20Frank Li
Add #address-cells and #size-cells for gsc@20 node to fix below warning: arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dtb: gsc@20: '#address-cells' is a required property Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: fsl-ls1028: add missed supply for wm8904Frank Li
Add A(CP, DB, DC, MIC)VDD-supply for wm8904 to fix below warning: arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dtb: audio-codec@1a: 'AVDD-supply' is a required property Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: layerscape: rename mdio-mux-emi to mdio-mux@<addr>Frank Li
Rename node name mdio-mux-emi<n>@<addr> to mdio-mux@<addr>. Fix below warning: arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dtb: board-control@2,0: 'mdio-mux-emi1@54' does not match any of the regexes: '^mdio-mux@[a-f0-9,]+$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/board/fsl,fpga-qixis.yaml Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: fsl-ls1012a-frdm: move clock-sc16is7xx under root nodeFrank Li
Move fixed clock "clock-sc16is7x" from dspi to root node to fix below warning: arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dtb: serial@0: Unevaluated properties are not allowed ('clock-sc16is7xx' was unexpected) Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: fsl-ls1043a: move "fsl,ls1043a-qdma" ahead "fsl,ls1021a-qdma"Frank Li
Move fsl,ls1043a-qdma ahead fallback string fsl,ls1021a-qdma. Fix warning: dma-controller@8380000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,ls1021a-qdma', 'fsl,ls1043a-qdma'] is too long Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: imx8-ss-img: remove undocument slot for jpegFrank Li
Remove undocument 'slot' property. It is default 0 at driver. We can remove it safely. Fix below warning: arch/arm64/boot/dts/freescale/imx8dx-colibri-iris.dtb: jpegdec@58400000: 'slot' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: freescale: imx93-tqma9352: set SION for cmd and data pad of USDHCMarkus Niebel
imx93 pad integrate has one issue, refer to ERR052021: ERR052021 uSDHC: Sometimes uSDHC does not work under VDD_SOC low drive mode and nominal mode Description: uSDHC PADs have one integration issue. When CMD/DATA lines direction change from output to input, uSDHC controller begin sampling, the integration issue will make input enable signal from uSDHC propagated to the PAD with a long delay, thus the new input value on the pad comes to uSDHC lately. The uSDHC sampled the old input value and the sampling result is wrong. Workaround: Set uSDHC CMD/DATA PADs iomux register SION bit to 1, then PADs will propagate input to uSDHC with no delay, so correct value is sampled. This issue will wrongly trigger the start bit when sample the USDHC command response, cause the USDHC trigger command CRC/index/endbit error, which will finally impact the tuning pass window, espically will impact the standard tuning logic, and can't find a correct delay cell to get the best timing. This follows changes made for i.MX93 EVK with commit bb89601282fc ("arm64: dts: imx93-11x11-evk: set SION for cmd and data pad of USDHC") Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: freescale: imx93-tqma9352-mba93xxca: add GPIO line namesMarkus Niebel
Provide GPIO line names for userspace usage, e.g. libgpiod. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-20 01:06:56 +0000