summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-09-11Merge tag 'arm-soc/for-6.12/devicetree-arm64' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into soc/dt This pull request contains Broadcom ARM64 SoCs Device Tree changes for 6.12, please pull the following: - Andrea adds a minimal Device Tree for the Raspberry Pi 5 (2712) - Stefan adjusts the bcm2837/bcm2712 bcm2836-l1-intc node name to conform to the binding changes * tag 'arm-soc/for-6.12/devicetree-arm64' of https://github.com/Broadcom/stblinux: ARM: dts: bcm2837/bcm2712: adjust local intc node names arm64: dts: broadcom: Add minimal support for Raspberry Pi 5 Link: https://lore.kernel.org/r/20240906180643.2275460-2-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11Merge tag 'v6.11-next-dts64' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt mt63xx: - add ADC node to the different PMICs mt7981: - Add SPI controller nodes. mt8183: - use referenced label for DSI endpoint. - disable soc_data efuse node, which does not has any cell definde (kukui). - fix the regulator tree (kukui). - fix potential deadlock by removing not needed clock in the MFG async power domain. - add DPI node. mt8186: - fix opp-supported-hw mask for GPU. - add lvts thermal sensor node. - add thermal zones. - fix reserved memory region of ADSP firmware (corsola). - add power domain to DPI node. - add SVS node. - fix internal display by disabling the external display temporarily (corsola). mt8188: - add thermal sensor for the AP. - add thermal zones. mt8195: - fix pull resistance for hdmi pins (cherry). - remove keyboard backlight node (cherry), this is detected through ChromeOS EC communication. - fix warning in mdp3 driver by providing a phandel to the SCP. - fix probe error of the USB controller by disabeling USB3 on the controller (cherry). - assign per default both phys to the USB controller (cherry). - fix binding validation by re-ordering the dp_intf clocks. mt8365: - add AFE audio controller. - add AFE and audio codec support (evk). mt8395: - fix probe error of the USB controller by disabeling USB3 on the controller (radax-nio-12l). - assign per default both phys to the USB controller (genio, kontron, radax). * tag 'v6.11-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (25 commits) arm64: dts: mediatek: add audio support for mt8365-evk arm64: dts: mediatek: add afe support for mt8365 SoC arm64: dts: mediatek: mt8186-corsola: Disable DPI display interface arm64: dts: mediatek: mt8186: Add svs node arm64: dts: mediatek: mt8186: Add power domain for DPI arm64: dts: mediatek: mt8195: Correct clock order for dp_intf* arm64: dts: mt8183: add dpi node to mt8183 arm64: dts: mediatek: mt8186-corsola: Update ADSP reserved memory region arm64: dts: mediatek: mt8183: Remove clock from mfg_async power domain arm64: dts: mt8183-kukui: clean up regulator tree arm64: dts: mediatek: mt7981: add SPI controllers arm64: dts: mediatek: mt8183-kukui: Disable unused efuse at 8000000 arm64: dts: mediatek: mt8188: add default thermal zones arm64: dts: mediatek: mt8188: add lvts definitions arm64: dts: mediatek: mt8186: add default thermal zones arm64: dts: mediatek: mt8186: add lvts definitions arm64: dts: mediatek: mt8195: Assign USB 3.0 PHY to xhci1 by default arm64: dts: mediatek: mt8395-nio-12l: Mark USB 3.0 on xhci1 as disabled arm64: dts: mediatek: mt8195-cherry: Mark USB 3.0 on xhci1 as disabled arm64: dts: mediatek: mt8195: Add SCP phandle to MDP3 DMA controller ... Link: https://lore.kernel.org/r/059656ad-5365-4097-86a1-f4ba43edf5da@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11Merge tag 'aspeed-6.12-devicetree' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt ASPEED device tree updates for 6.12 - New machines * IBM P11 AST2600 BMC machines, named Blueridge and Fuji * Meta's Catalina AST2600 BMC - Updates to harma, minerva, mtmitchell, mtjade, system1, SPC621D8HM3 - Various changes to the dtsi to keep the YAML checker happy * tag 'aspeed-6.12-devicetree' of https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: (52 commits) ARM: dts: aspeed: catalina: Update io expander line names ARM: dts: aspeed: catalina: Add pdb cpld io expander ARM: dts: aspeed: harma: Remove pca9546 ARM: dts: aspeed: harma: Fix spi-gpio dtb_check warnings ARM: dts: aspeed: harma: Enable mctp controller ARM: dts: aspeed: harma: Add temperature device ARM: dts: aspeed: harma: Add fru device ARM: dts: aspeed: harma: Remove multi-host property ARM: dts: aspeed: harma: Add power monitor xdp710 ARM: dts: aspeed: harma: Add ina238 ARM: dts: aspeed: harma: Add sgpio name ARM: dts: aspeed: harma: Add VR devices ARM: dts: aspeed: harma: Revise hsc chip ARM: dts: aspeed-g6: Drop cells properties from ethernet nodes ARM: dts: aspeed-g6: Use generic 'ethernet' for ftgmac100 nodes ARM: dts: aspeed: Clean up AST2500 pinctrl properties ARM: dts: aspeed: Remove undocumented XDMA nodes ARM: dts: aspeed: Specify required properties for sram node ARM: dts: aspeed: Specify correct generic compatible for CVIC ARM: dts: aspeed: Fix coprocessor interrupt controller node name ... Link: https://lore.kernel.org/r/CACPK8XeGDUrbJ-OaxqQBR=aVVYyrKGnvT1ZKXO0vPHpsjQ_i9g@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11Merge tag 'v6.12-rockchip-dts32-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt More pwm, i2s and i2c nodes for the RV1126 soc. * tag 'v6.12-rockchip-dts32-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Add pwm node for RV1126 ARM: dts: rockchip: Add i2s0 node for RV1126 ARM: dts: rockchip: Add i2c3 node for RV1126 Link: https://lore.kernel.org/r/1862312.dTVjPilprF@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11Merge tag 'v6.12-rockchip-dts64-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt New boards the Odroid-M2 and GameForce Ace, CAN on rk3568, RGA2 on rk3588 and some non-critical dts cleanups. * tag 'v6.12-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: add CAN0 and CAN1 interfaces to mecsbc board arm64: dts: rockchip: add CAN-FD controller nodes to rk3568 arm64: dts: rockchip: remove duplicate nodes from dts for ROCK 4SE arm64: dts: rockchip: Add GameForce Ace dt-bindings: arm: rockchip: Add GameForce Ace arm64: dts: rockchip: rk3588s fix sdio pins to pull up arm64: dts: rockchip: Add RGA2 support to rk3588 arm64: dts: rockchip: Add missing tshut props to tsadc on quartz64-b arm64: dts: rockchip: Add Hardkernel ODROID-M2 dt-bindings: arm: rockchip: Add Hardkernel ODROID-M2 arm64: dts: rockchip: drop hp-pin-name property from audio card on nanopc-t6 Link: https://lore.kernel.org/r/11663608.jrtcCam0TZ@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11Merge tag 'arm-soc/for-6.12/devicetree' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into soc/dt This pull request contains Broadcom SoCs Device Tree changes for 6.12, please pull the following: - Krzysztof documents the AVS monitor binding present on 2711 (Raspberry Pi 4) - Rafal updates the Broadcom Northstar DTS files to use the recent NVMEM binding - Artur factors the nodes between the BCM21664 and BCM23550 SoCs since they are nearly identical - Stefan converts the bcm2835-system-timer and bcm2836-l1-intc to a YAML binding syntax * tag 'arm-soc/for-6.12/devicetree' of https://github.com/Broadcom/stblinux: dt-bindings: interrupt-controller: convert bcm2836-l1-intc to yaml dt-bindings: timer: convert bcm2835-system-timer bindings to YAML ARM: dts: bcm-mobile: Split out nodes used by both BCM21664 and BCM23550 ARM: dts: broadcom: bcm21664: Move chosen node into Garnet DTS ARM: dts: broadcom: convert NVMEM content to layout syntax dt-bindings: soc: bcm: document brcm,bcm2711-avs-monitor Link: https://lore.kernel.org/r/20240906180643.2275460-1-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11Merge tag 'dt-cleanup-6.12' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt Minor improvements in ARM DTS for v6.12 1. Realview: correct unit addresses (e.g. drop when not valid). 2. Nuvoton: correct node name to match bindings. * tag 'dt-cleanup-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt: ARM: dts: nuvoton: wpcm450: align LED and GPIO keys node name with bindings arm: dts: realview: Add/drop missing/spurious unit-addreses Link: https://lore.kernel.org/r/20240906140513.71307-2-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11Merge tag 'dt64-cleanup-6.12' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt Minor improvements in ARM64 DTS for v6.12 1. APM: correct node name to match bindings. 2. Spreadtrum: correct node names to match bindings, order properties to match DTS coding style and put SPDX identifier at top of the file as expected usually. * tag 'dt64-cleanup-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt: arm64: dts: sprd: move/add SPDX license to top of the file arm64: dts: sprd: reorder clock-names after clocks arm64: dts: sprd: rename SDHCI and fuel gauge nodes to match bindings arm64: dts: apm: storm: Rename menetphy@3 to ethernet-phy@3 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-09arm64: dts: mediatek: add audio support for mt8365-evkAlexandre Mergnat
Add the sound node which is linked to the MT8365 SoC AFE and the MT6357 audio codec. Update the file header. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Link: https://lore.kernel.org/r/20240226-audio-i350-v8-5-e80a57d026ce@baylibre.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2024-09-09arm64: dts: mediatek: add afe support for mt8365 SoCAlexandre Mergnat
Add audio front end support of MT8365 SoC. Update the file header. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Link: https://lore.kernel.org/r/20240226-audio-i350-v8-4-e80a57d026ce@baylibre.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2024-09-09arm64: dts: mediatek: mt8186-corsola: Disable DPI display interfaceChen-Yu Tsai
The DPI display interface feeds the external display pipeline. However the pipeline representation is currently incomplete. Efforts are still under way to come up with a way to represent the "creative" repurposing of the DP bridge chip's internal output mux, which is meant to support USB type-C orientation changes, to output to one of two type-C ports. Until that is finalized, the external display can't be fully described, and thus won't work. Even worse, the half complete graph potentially confuses the OS, breaking the internal display as well. Disable the external display interface across the whole Corsola family until the DP / USB Type-C muxing graph binding is ready. Reported-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Closes: https://lore.kernel.org/linux-mediatek/38a703a9-6efb-456a-a248-1dd3687e526d@gmail.com/ Fixes: 8855d01fb81f ("arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool") Cc: <stable@vger.kernel.org> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20240821042836.2631815-1-wenst@chromium.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2024-09-09arm64: dts: mediatek: mt8186: Add svs nodeRohit Agarwal
Add clock/irq/efuse setting in svs nodes for mt8186 SoC. Signed-off-by: Rohit Agarwal <rohiagar@chromium.org> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20240830084544.2898512-4-rohiagar@chromium.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2024-09-09arm64: dts: mediatek: mt8186: Add power domain for DPIRohit Agarwal
Add power domain phandle to the DPI controller in mediatek mt8186 SoC. Signed-off-by: Rohit Agarwal <rohiagar@chromium.org> Link: https://lore.kernel.org/r/20240830084544.2898512-3-rohiagar@chromium.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2024-09-09arm64: dts: mediatek: mt8195: Correct clock order for dp_intf*Chen-Yu Tsai
The clocks for dp_intf* device nodes are given in the wrong order, causing the binding validation to fail. Fixes: 6c2503b5856a ("arm64: dts: mt8195: Add dp-intf nodes") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20240802070951.1086616-1-wenst@chromium.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2024-09-09arm64: dts: mt8183: add dpi node to mt8183Pi-Hsun Shih
Add dpi node to mt8183. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Signed-off-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Pin-yen Lin <treapking@chromium.org> Link: https://lore.kernel.org/r/20240819120735.1508789-1-treapking@chromium.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2024-09-05arm64: dts: rockchip: add CAN0 and CAN1 interfaces to mecsbc boardDavid Jander
This patch adds support for the CAN0 and CAN1 interfaces to the board. Signed-off-by: David Jander <david@protonic.nl> Tested-by: Alibek Omarov <a1ba.omarov@gmail.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20240904-rk3568-canfd-v1-2-73bda5fb4e03@pengutronix.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-09-05arm64: dts: rockchip: add CAN-FD controller nodes to rk3568David Jander
Add nodes to the rk3568 devicetree to support the CAN-FD controllers. Signed-off-by: David Jander <david@protonic.nl> Tested-by: Alibek Omarov <a1ba.omarov@gmail.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20240904-rk3568-canfd-v1-1-73bda5fb4e03@pengutronix.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-09-05Merge tag 'sunxi-dt-for-6.12' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt Allwinner SoC device tree changes for 6.12 ARM64 device tree and binding-only changes - Move PMIC on RG35XX boards from RSB (Allwinner proprietary bus) to I2C - Introduce Anbernic RG35XX-SP board - Enable charger on RG35XX boards - Add thermal trip points for Allwinner A64 GPU * tag 'sunxi-dt-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: a64: Add GPU thermal trips to the SoC dtsi arm64: dts: allwinner: h700: Add charger for Anbernic RG35XX arm64: dts: allwinner: h700: Add Anbernic RG35XX-SP arm64: dts: allwinner: h616: Change RG35XX Series from r_rsb to r_i2c arm64: dts: allwinner: h616: Add r_i2c pinctrl nodes dt-bindings: arm: sunxi: Add Anbernic RG35XXSP Link: https://lore.kernel.org/r/ZtnZRhTwsBeO7Qtb@wens.tw Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05arm64: dts: nuvoton: ma35d1: Add uart pinctrl settingsJacky Huang
Enable all UART nodes presented on som and iot boards, and add pinctrl function settings to these nodes. Signed-off-by: Jacky Huang <ychuang3@nuvoton.com> Link: https://lore.kernel.org/r/20240819035647.306-4-ychuang570808@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05arm64: dts: nuvoton: ma35d1: Add pinctrl and gpio nodesJacky Huang
Added the pinctrl node and its subnodes, the gpioa through gpion nodes, to the MA35D1 device tree. Signed-off-by: Jacky Huang <ychuang3@nuvoton.com> Link: https://lore.kernel.org/r/20240819035647.306-3-ychuang570808@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05arm64: dts: nuvoton: Add syscon to the system-management nodeJacky Huang
According to the binding document, add the "syscon" compatible to the system-management node. Signed-off-by: Jacky Huang <ychuang3@nuvoton.com> Link: https://lore.kernel.org/r/20240819035647.306-2-ychuang570808@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05ARM: dts: Fix undocumented LM75 compatible nodesRob Herring
"lm75" without any vendor is undocumented. It works with the Linux kernel since the I2C subsystem will do matches of the compatible string without a vendor prefix to the i2c_device_id and/or driver name. Mostly replace "lm75" with "national,lm75" as that's the original part vendor and the compatible which matches what "lm75" matched with. In a couple of cases the node name or compatible gives a clue to the actual part and vendor and a more specific compatible can be used. In these cases, it does change the variant the kernel picks. "nct75" is an OnSemi part which is compatible with TI TMP75C based on a comparison of the OnSemi NCT75 datasheet and configuration the Linux driver uses. Adding an OnSemi compatible would be an ABI change. "nxp,lm75" is most likely an NXP part. Alexander Stein says the i.MX53 boards are a NXP LM75A as well. NXP makes a LM75A and LM75B. Both are 11-bit resolution and 100ms sample time. The "national,lm75a" is 9-bit, so "national,lm75b" is the closest match for both NXP variants. While we're here, fix the node names to use the generic name "temperature-sensor". Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com> # am335x-nano.dts Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx53-mba53.dts, imx53-tqma53.dtsi Link: https://lore.kernel.org/r/20240816164717.1585629-1-robh@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05Merge tag 'amlogic-arm64-dt-for-v6.12' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt Amlogic ARM64 DT changes for v6.12: - New Boards: - AW419 (Amlogic C3) - Power Controller node for Amlogic A5 SoC - Always-On Secure node for Amlogig A4/T7/C4 & S4 SoCs - Amlogic A4 & C3 hardware support: - PLL, SPICC, NOND, SDCard, Ethernet, Watchdog - Final fixes for DTBs check: - add clock and clock-names to sound cards - drop saradc gxlx compatible * tag 'amlogic-arm64-dt-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: dts: amlogic: gxlx-s905l-p271: drop saradc gxlx compatible arm64: dts: amlogic: add clock and clock-names to sound cards arm64: dts: amlogic: c3: fix dtbcheck warning arm64: dts: amlogic: add C3 AW419 board arm64: dts: amlogic: add some device nodes for C3 dt-bindings: clock: fix C3 PLL input parameter arm64: dts: amlogic: a4: add ao secure node arm64: dts: amlogic: t7: add ao secure node arm64: dts: amlogic: c3: add ao secure node arm64: dts: amlogic: s4: add ao secure node arm64: dts: amlogic: add watchdog node for A4 SoCs arm64: dts: amlogic: enable some device nodes for S4 arm64: dts: amlogic: a5: add power domain controller node Link: https://lore.kernel.org/r/cc8fb460-5ac0-4b16-8490-8ac9f89f1b7f@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05Merge tag 'amlogic-arm-dt-for-v6.11' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt Amlogic ARM DT changes for v6.11: - simple dt bindings check fix for gpio keys node name * tag 'amlogic-arm-dt-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: ARM: dts: amlogic: meson8b-ec100: align GPIO keys node name with bindings Link: https://lore.kernel.org/r/220683c1-e250-4c55-bbe5-c36e89391c32@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05arm64: dts: toshiba: Fix pl011 and pl022 clocksRob Herring
Arm Primecell blocks have a functional clock and a bus clock. The Toshiba TMPV7708 only defines the bus clock (apb_pclk). Add the "uartclk" and "sspclk" clocks to the PL011 and PL022 nodes, respectively. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20240826183848.1290957-2-robh@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05Merge tag 'qcom-arm64-for-6.12' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm Arm64 DeviceTree updates for v6.12 This introduces support for the following devices: - Lenovo Thinkpad T14s Gen 6 - Microsoft Surface Laptop 7 laptop - Lenovo A6000 - Lenovo A6010 - Samsung Galaxy J3, - Lenovo Vibe K5 (multiple variants) - LG G4 IPQ5332 global clock controller is marked as an interconnect-provider, and the USB interrupt triggers are corrected. Touchscreen description is added to the Samsung Galaxy Core Prime and Max, and touch keys are added to the Samsung Galaxy Grand Prime and Galaxy Tab A. Camera flash is added to BQ Aquaris M5 and X5. The SD-card slot is described for the QCM6490 IDP. For SA8775P CPU and LLCC bwmon is added, audio, compute and general purpose DSP remoteprocs are added, with FastRPC on audio and compute DSP. CPUidle states, capacity and DPC properties are added. On SC8180X definitions for the multiport USB controller is introduced, and enabled on the Lenovo Flex 5G to bring the camera to life. Power key definitions are added as well. The RGB camera sensor on the Lenovo ThinkPad X13s is described. PCIe pinconf properties are cleaned up on this and the CRD. The four USB Type-A ports found on the SA8295P ADP are enabled. The modem subsystem remoteproc is introduced on the SDX75 and enabled on the IDP device. Camera, display and GPU clock controllers are added for the SM4450 platform. On the F(x)tec Pro1X device, display, GPU, WiFi, RGB LED, SD-card, remoteprocs, USB3 SuperSpeed, touchscreen, IO-expander, hall switch, caps lock LED and camera button are introduced. The camera clock controller is added to SM8150, and the GPU-only "amd,imageon" compatible is dropped from the MTP device. Refgen regulator for the DSI nodes of SM8350 is described, and the display subsystem interconnect paths are corrected. The camera control interface controllers are described on both SM8550 and SM8650. The bluetooth node on on SM8550 QRD, SM8650 QRD and SM8650 HDK are transitioned to the power sequence description. WiFi is added to the SM8550 hardware development kit (HDK). On the X1 Elite platform, one more UART, a DisplayPort PHY, the USB multiport controller, a PCIe controller and PHY are added. Orientation switching is wired up for the USB+DP PHYs. RPMh statistics node is added. For the X1 Elite CRD the LID switch and the SDX65 modems are introduced. * tag 'qcom-arm64-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (120 commits) arm64: dts: qcom: x1e80100: Fix PHY for DP2 arm64: dts: qcom: qcm6490-idp: Add SD Card node arm64: dts: qcom: x1e80100: Add orientation-switch to all USB+DP QMP PHYs arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6 dt-bindings: arm: qcom: Add Lenovo ThinkPad T14s Gen 6 Revert "arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash" arm64: dts: qcom: Add support for X1-based Surface Laptop 7 devices arm64: dts: qcom: x1e80100: Add UART2 arm64: dts: qcom: x1e80100-pmics: Add PMC8380C PWM dt-bindings: arm: qcom: Add Surface Laptop 7 devices arm64: dts: qcom: sm8150-mtp: drop incorrect amd,imageon arm64: qcom: sa8775p: Add ADSP and CDSP0 fastrpc nodes arm64: dts: qcom: x1e80100: Add USB Multiport controller arm64: dts: qcom: sa8775p: fix the fastrpc label arm64: dts: qcom: ipq5332: Add icc provider ability to gcc dt-bindings: interconnect: Add Qualcomm IPQ5332 support arm64: dts: qcom: sm8250: move lpass codec macros to use clks directly arm64: dts: qcom: msm8998: Add disabled support for LPASS iommu for Q6 dt-bindings: clock: gcc-msm8998: Add Q6 and LPASS clocks definitions arm64: dts: qcom: msm8976: Add restart node ... Link: https://lore.kernel.org/r/20240904215752.24465-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05Merge tag 'qcom-arm32-for-6.12' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm Arm32 DeviceTree updates for v6.12 MSM8226 gains CPU frequency scaling support and CPU thermal zones wired up. The Nokia Lumia 630 and 830 gains inertial sensors. Samsung Galaxy S5 gains pstore functionality. A range of fixes for DeviceTree validation issues are added. * tag 'qcom-arm32-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: add generic compat string to RPM glink channels ARM: dts: qcom: msm8226-microsoft-common: Add inertial sensors ARM: dts: qcom: msm8226: Convert APCS usages to mbox interface ARM: dts: qcom: msm8226: Hook up CPU cooling ARM: dts: qcom: msm8226: Add CPU frequency scaling support ARM: dts: qcom: {a,i}pq8064: correct clock-names in sata node ARM: dts: qcom: apq8064: drop reg-names on sata-phy node ARM: dts: qcom: msm8974pro-samsung-klte: Add pstore node ARM: dts: qcom: ipq4019: adhere to pinctrl dtschema ARM: dts: qcom: ipq8064: adhere to pinctrl dtschema ARM: dts: qcom: apq8064: adhere to pinctrl dtschema ARM: dts: qcom: asus,nexus7-flo: remove duplicate pinctrl handle in i2c nodes ARM: dts: qcom: apq8064-pins: correct error in drive-strength property ARM: dts: qcom: pma8084: add pon node Link: https://lore.kernel.org/r/20240904193228.15466-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05Merge tag 'stm32-dt-for-v6.12-1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt STM32 DT for v6.12, round 1 Highlights: ----------- - MPU: - STM32MP13: - DH DHSBC board: - Fix Ethernet: MDIO lines in sleep, disable PHY clock out. - Add nvmem cells for ETH MAC address (use OTP to get MAC addr) - Add led usage for RTL8211 PHY. - STMP32MP15: - Protonic boards: - Fix QSPI pins configuration for prtt1x boards. - Add new MECI01 and MECT1S boards support: - MECIO1: I/O and motor control used in blood sample anlysis. - MECT1S: 1000 base-T1 switch for internal machine networks of blood sample analysis machines. - DH PDK2 board: - Use SAI to generate bit and frame clock. * tag 'stm32-dt-for-v6.12-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: Use SAI to generate bit and frame clock on STM32MP15xx DHCOM PDK2 ARM: dts: stm32: Switch bitclock/frame-master to flag on STM32MP15xx DHCOM PDK2 ARM: dts: stm32: Sort properties in audio endpoints on STM32MP15xx DHCOM PDK2 ARM: dts: stm32: Add MECIO1 and MECT1S board variants dt-bindings: arm: stm32: Add compatible strings for Protonic boards ARM: dts: stm32: stm32mp151a-prtt1l: Fix QSPI configuration ARM: dts: stm32: Describe PHY LEDs in DH STM32MP13xx DHCOR DHSBC board DT ARM: dts: stm32: Add missing gpio options for sdmmc2_d47_pins_d ARM: dts: stm32: Add ethernet MAC nvmem cells to DH STM32MP13xx DHCOR DHSBC board ARM: dts: stm32: Disable PHY clock output on DH STM32MP13xx DHCOR DHSBC board ARM: dts: stm32: Keep MDIO bus in AF across suspend DH STM32MP13xx DHCOR DHSBC board Link: https://lore.kernel.org/r/1091e600-f1e7-4d1f-b83d-c67e8073772c@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05Merge tag 'omap-for-v6.12/dt-signed' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/dt ARM: dts: ti: mix am335x cleanups for v6.12 * tag 'omap-for-v6.12/dt-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap: ARM: dts: ti: omap: am335x-wega: Fix audio clock provider ARM: dts: ti: omap: am335x-regor: Fix RS485 settings ARM: dts: omap: am335x-bone: convert NVMEM content to layout syntax ARM: dts: am335x-bone-common: Increase MDIO reset deassert time Link: https://lore.kernel.org/r/7hh6avark1.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05Merge tag 'imx-dt64-6.12' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX arm64 device tree changes for 6.12: - A series from Alexander Stein that improves imx93-tqma9352 board support by adding PMIC, eMMC regulators, pad configurations, etc. - A series from Benjamin Hahn that enables overlay for no Ethernet device, TPM and PCIe support for imx8mp-phycore board - A few changes from Fabio Estevam that fix dt-schema warnings for i.MX8MM and i.MX93 based boards - A series from Francesco Dolcini to add fxl6408 gpio expander, PMIC thermal zone and USB3803 HUB for colibri-imx8x board - A great number of changes from Frank Li that improve i.MX95 based with many device additions, and fix dt-schema warnings on various i.MX8 and layerscape device trees - A series from João Paulo Gonçalves to add HDMI audio, analog input, VPU, and sound card support for Toradex Verdin and Colibri boards - A series from Markus Niebel to improve imx93-tqma9352 board support - Add support for Kontron i.MX93 OSM-S SoM and BL carrier board - A couple of changes from Peng Fan to describe cache configuration for i.MX93 SoC and add device tree for i.MX93-14x14-EVK board - A series from Shengjiu Wang to improve various audio features for imx93-11x11-evk board - A series from Yashwanth Varakala to better describe regulator usage for imx8mp-phyboard-pollux board - Other random changes on various board device trees * tag 'imx-dt64-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (121 commits) arm64: dts: imx: rename gpio hog as <gpio name>-hog arm64: dts: imx8mp-var-som-symphony: Add Variscite Symphony board and VAR-SOM-MX8MP SoM arm64: dts: imx8mm-var-som: drop unused top-level compatible arm64: dts: ls1088ardb: add new RTC PCF2131 support arm64: dts: colibri-imx8x: Cleanup comments arm64: dts: colibri-imx8x: Add 50mhz clock for eth arm64: dts: colibri-imx8x: Add adma_pwm arm64: dts: colibri-imx8x: Add vpu support arm64: dts: colibri-imx8x: Add USB3803 HUB arm64: dts: colibri-imx8x: Add PMIC thermal zone arm64: dts: colibri-imx8x: Add sound card arm64: dts: colibri-imx8x: Add fxl6408 gpio expander arm64: dts: colibri-imx8x: Add analog inputs arm64: dts: colibri-imx8x: Add usb support arm64: dts: imx8qm-mek: add usb 3.0 and related type C nodes arm64: dts: imx8qm-mek: add i2c in mipi[0,1] subsystem arm64: dts: imx8qm-mek: add pwm and i2c in lvds subsystem arm64: dts: imx8qm-mek: add cm4 remote-proc and related memory region arm64: dts: imx8qm: add mipi subsystem arm64: dts: imx8: add basic mipi subsystem ... Link: https://lore.kernel.org/r/20240904143439.211552-5-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05Merge tag 'imx-dt-6.12' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX ARM device tree changes for 6.12: - A series from Fabio Estevam to fix dt-schema warnings on i.MX23, i.MX28 and i.MX27 device trees - A bunch of changes from Krzysztof Kozlowski that corrects TQ Systems DTS patterns in MAINTAINERS file and fix various dt-schema warnings - A couple changes from Liu Ying to improve HDMI support on i.MX53 QSB board - A series from Lukasz Majewski to update imx28-lwe device tree, fixing partition definitions, reducing SPI frequency and cleaning up SAIF - A series from Markus Niebel to improve TQ-Systems device trees, adding iio-hwmon device, using better compatible for LM75 temp sensor, moving I2C3 pinmux to a better place * tag 'imx-dt-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (27 commits) ARM: dts: imx28-lwe: Remove saif[01] definitions ARM: dts: imx28-lwe: Reduce maximal SPI frequency ARM: dts: imx28-lwe: Fix partitions definitions ARM: dts: imx6qdl: align pin config nodes with bindings ARM: dts: imx6sl: align pin config nodes with bindings ARM: dts: imx6ul: align pin config nodes with bindings ARM: dts: imx6ul-tx6ul: drop empty pinctrl placeholder ARM: dts: imx28-tx28: Fix the fsl,saif-master usage ARM: dts: imx6ull-seeed-npi: fix fsl,pins property in tscgrp pinctrl ARM: dts: imx6ul-geam: fix fsl,pins property in tscgrp pinctrl ARM: dts: imx23/8: Rename apbh and apbx nodes ARM: dts: imx6qdl-mba6b: remove doubled entry for I2C1 pinmux ARM: dts: imx6qdl-mba6: improve compatible for LM75 temp sensor ARM: dts: imx6qdl-tqma6: improve compatible for LM75 temp sensor ARM: dts: imx6qdl-tqma6: move i2c3 pinmux to imx6qdl-tqma6b ARM: dts: imx7d-sdb: align pin config nodes with bindings ARM: dts: imx7: align pin config nodes with bindings ARM: dts: imx7d-zii-rmu2: fix Ethernet PHY pinctrl property MAINTAINERS: correct TQ Systems DTS patterns ARM: dts: imx6: update spdif sound card node properties ... Link: https://lore.kernel.org/r/20240904143439.211552-4-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05Merge tag 'imx-bindings-6.12' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX dt-bindings changes for 6.12: - New compatibles for boards: Kontron i.MX93 OSM-S, i.MX93 14x14 EVK, Variscite Symphony and VAR-SOM-MX8MP, etc - One spelling correction on TQ-Systems - One renaming of gw7905 to gw75xx * tag 'imx-bindings-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dt-bindings: arm: fsl: Add Variscite Symphony board and VAR-SOM-MX8MP SoM dt-bindings: arm: fsl: drop usage of VAR-SOM-MX8MM SoM compatible alone dt-bindings: arm: fsl: rename gw7905 to gw75xx dt-bindings: arm: fsl: Add Kontron i.MX93 OSM-S based boards dt-bindings: arm: fsl: correct spelling of TQ-Systems dt-bindings: arm: fsl: add fsl-ls2081a-rdb board dt-bindings: arm: fsl: add i.MX93 14x14 EVK board Link: https://lore.kernel.org/r/20240904143439.211552-3-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05Merge tag 'riscv-sophgo-dt-for-6.12' of https://github.com/sophgo/linux into ↵Arnd Bergmann
soc/dt RISC-V Devicetrees for v6.12 Sopgho: Added DMA controller for CV18XX. Added I2C, MMC, GPIO and onboard MCU (HWMON) for SG2042. Enable SDHCI0 for HuashanPi (using cv1812h). Some minor changes about dt-bindings for Sipeed LicheeRV Nano board (using SG2002, and SG2002 is the new codename of CV181xC). Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * tag 'riscv-sophgo-dt-for-6.12' of https://github.com/sophgo/linux: dt-bindings: riscv: Add Sipeed LicheeRV Nano board compatibles dt-bindings: interrupt-controller: Add SOPHGO SG2002 plic riscv: dts: sophgo: Add mcu device for Milk-V Pioneer riscv: sophgo: dts: add gpio controllers for SG2042 SoC riscv: sophgo: dts: add mmc controllers for SG2042 SoC riscv: dts: sophgo: Add i2c device support for sg2042 riscv: dts: sophgo: Use common "interrupt-parent" for all peripherals for sg2042 riscv: dts: sophgo: Add sdhci0 configuration for Huashan Pi riscv: dts: sophgo: cv18xx: add DMA controller Link: https://lore.kernel.org/r/MA0P287MB28228F4FC59B057DF57D9A11FE9C2@MA0P287MB2822.INDP287.PROD.OUTLOOK.COM Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05Merge tag 'ti-k3-dt-for-v6.12' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt TI K3 device tree updates for v6.12 Generic Fixups/Cleanups: - AM62, AM62A, AM64, AM65, AM62P: ESM node cleanups - J784s4, J721s2, J721e, AM65: FSS (Flash subsystem) fixups for ranges - j721e/j7200/j721s2/am68/am69 SK/SoM, IOT2050: Disable of R5F lockstep - j721e/j7200/j721s2/am68/am69 reserve GP timers for firmware usage. - Misc device tree warning fixups: Serdes simple-mfd fixes for am654-serdes-ctrl; rename of gpio-hog nodes; mux-controller node names SoC Specific features and Fixes: New boards: - AM67A/J722s based BeagleBoard.org Foundation's BeagleY-AI AM62: - Thermal throttling enabled AM62A: - Add E5010 JPEG encoder AM62P: - gpio-reserved ranges - SK: drop cts/rts for wakeup_uart0 firmware console pinmux J722s: (AM62P variant) - IPC/Remote proc for C7x and R5F - gpio-reserved ranges - EVM: Add main_uart5 description and CAN support. AM64x: - adc description fixes for dtbs_check warnings - tqma64xxl and phyboard-electra: Add PRUSS ICSSG capability - CPSW Ethernet is now disabled by default at SoC level and enabled explicitly at board level. - USB property to add fall back to j721e AM65x: - IOT2050: Add overlays for M.2, add Eth phy LED description - idk: Fixes for DMA causing dtbs_check warning, Add MCAN J721e: - SK and beagleboneai64: Fixes for inverted C6x carveouts J721s2: - AM68-SK: Fixes for mmc clkb internal mux, ospi partition for uboot.backup alignment fixup. J784s4: - WDT clock ID fix. - EVM: Use 4 lanes for PCIe0. * tag 'ti-k3-dt-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (57 commits) arm64: dts: ti: k3-j722s-evm: Enable Inter-Processor Communication arm64: dts: ti: k3-j722s-main: Add R5F and C7x remote processor nodes arm64: dts: ti: k3-am68-sk-som: Update Partition info for OSPI Flash arm64: dts: ti: Add k3-am67a-beagley-ai dt-bindings: arm: ti: Add BeagleY-AI arm64: dts: ti: iot2050: Declare Ethernet PHY leds arm64: dts: ti: k3-am65: Add ESM nodes arm64: dts: ti: k3-am64: Add more ESM interrupt sources arm64: dts: ti: k3-am62a: Add ESM nodes arm64: dts: ti: k3-am62: Add comments to ESM nodes arm64: dts: ti: k3-am62p: Fix ESM interrupt sources arm64: dts: ti: k3-am62p: Remove 'reserved' status for ESM arm64: dts: ti: k3-j721s2-evm-gesi-exp-board: Rename gpio-hog node name arm64: dts: ti: k3-am642-evm-nand: Rename pinctrl node and gpio-hog names arm64: dts: ti: k3-am654-idk: Fix dtbs_check warning in ICSSG dmas arm64: dts: ti: k3-j784s4: Include entire FSS region in ranges arm64: dts: ti: k3-j721s2: Include entire FSS region in ranges arm64: dts: ti: k3-j721e: Include entire FSS region in ranges arm64: dts: ti: k3-am65: Include entire FSS region in ranges arm64: dts: ti: k3-am64: add USB fallback compatible to J721E ... Link: https://lore.kernel.org/r/20240903155701.q7soxtplbkfofwxt@entering Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05Merge tag 'renesas-dts-for-v6.12-tag2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DTS updates for v6.12 (take two) - Add support for Ethernet TSN and PCIe on the R-Car V4H SoC and the White-Hawk (Single) development board, - Add display support for the RZ/G2UL SoC and the RZ/G2UL SMARC EVk board, - Add I2C support for the RZ/G3S SoC and the RZ/G3S SMARC EVK board, - Add support for HDMI audio on the RZ/G2L and RZ/G2LC SMARC EVK boards, - Add initial support for the RZ/V2H(P) (R9A09G057) SoC and the RZ/V2H EVK board, - Miscellaneous fixes and improvements. * tag 'renesas-dts-for-v6.12-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (34 commits) arm64: dts: renesas: r8a779h0: Add family fallback for CSISP IP arm64: dts: renesas: r8a779a0: Add family fallback for CSISP IP arm64: dts: renesas: r8a779g0: Add family fallback for CSISP IP arm64: dts: renesas: r8a779h0: Add family fallback for VIN IP arm64: dts: renesas: r8a779a0: Add family fallback for VIN IP arm64: dts: renesas: r8a779g0: Add family fallback for VIN IP arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable watchdog arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable OSTM, I2C, and SDHI arm64: dts: renesas: r9a09g057: Add WDT0-WDT3 nodes arm64: dts: renesas: r9a09g057: Add SDHI0-SDHI2 nodes arm64: dts: renesas: r9a09g057: Add RIIC0-RIIC8 nodes arm64: dts: renesas: r9a09g057: Add OSTM0-OSTM7 nodes arm64: dts: renesas: Add initial DTS for RZ/V2H EVK board arm64: dts: renesas: Add initial SoC DTSI for RZ/V2H(P) SoC dt-bindings: soc: renesas: Document RZ/V2H EVK board dt-bindings: clock: renesas: Document RZ/V2H(P) SoC CPG arm64: dts: renesas: r9a07g043u11-smarc: Enable DU arm64: dts: renesas: rzg2lc-smarc: Enable HDMI audio arm64: dts: renesas: rzg2l-smarc: Enable HDMI audio arm64: dts: renesas: r9a07g043u: Add DU node ... Link: https://lore.kernel.org/r/cover.1725374275.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05ARM: dts: stm32: Use SAI to generate bit and frame clock on STM32MP15xx ↵Marek Vasut
DHCOM PDK2 By default the SGTL5000 derives bit and frame clock from MCLK, which does not produce particularly accurate results. The SGTL5000 PLL does improve the accuracy, but also increases power consumption. Using the SoC SAI interface as bit and frame clock source results in the best accuracy without the power consumption increase downside. Switch the bit and frame clock direction from SAI to SGTL5000, reduce mclk-fs to match. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-09-05ARM: dts: stm32: Switch bitclock/frame-master to flag on STM32MP15xx DHCOM PDK2Marek Vasut
Switch the bitclock-master and frame-master properties from phandle to flag on STM32MP15xx DHCOM PDK2. There is no real reason to use phandle in this system DT, since the phandle points to the endpoint node which contains the property itself. Simplify the DT. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-09-05ARM: dts: stm32: Sort properties in audio endpoints on STM32MP15xx DHCOM PDK2Marek Vasut
Sort properties alphabetically in audio endpoints of STM32MP15xx DHCOM PDK2 DT. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-09-05ARM: dts: stm32: Add MECIO1 and MECT1S board variantsDavid Jander
Introduce device tree support for the MECIO1 and MECT1S board variants. MECIO1 is an I/O and motor control board used in blood sample analysis machines. MECT1S is a 1000Base-T1 switch for internal machine networks of blood sample analysis machines. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-09-05dt-bindings: arm: stm32: Add compatible strings for Protonic boardsOleksij Rempel
Add compatible strings for Protonic MECIO1r0 and MECT1S boards to the STM32MP151-based boards section and Protonic MECIO1r1 board to the STM32MP153-based boards section. MECIO1 is an I/O and motor control board used in blood sample analysis machines. MECT1S is a 1000Base-T1 switch for internal machine networks of blood sample analysis machines. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-09-05ARM: dts: stm32: stm32mp151a-prtt1l: Fix QSPI configurationOleksij Rempel
Rename 'pins1' to 'pins' in the qspi_bk1_pins_a node to correct the subnode name. The incorrect name caused the configuration to be applied to the wrong subnode, resulting in QSPI not working properly. Some additional changes was made: - To avoid this kind of regression, all references to pin configuration nodes are now referenced directly using the format &{label/subnode}. - /delete-property/ bias-disable; was added everywhere where bias-pull-up is used - redundant properties like driver-push-pull are removed Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-09-05ARM: dts: stm32: Describe PHY LEDs in DH STM32MP13xx DHCOR DHSBC board DTMarek Vasut
The RTL8211 PHY on DH STM32MP13xx DHCOR DHSBC carrier board supports HW LED offload, the LEDs can be configured on link at 10/100/1000 line rate and on RXTX activity. There are two PHYs on this board, each only has two out of three LEDs connected to the PHY LED outputs. Describe this hardware configuration in DT. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-09-05ARM: dts: stm32: Add missing gpio options for sdmmc2_d47_pins_dSean Nyekjaer
This enables DDR50 mode for the eMMC on Octavo OSD32MP1-RED board. Fixes: be78ab4f632c ("ARM: dts: stm32: add initial support for stm32mp157-odyssey board") Signed-off-by: Sean Nyekjaer <sean@geanix.com> Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-09-05ARM: dts: stm32: Add ethernet MAC nvmem cells to DH STM32MP13xx DHCOR DHSBC ↵Marek Vasut
board Describe ethernet MAC address nvmem cells in DH STM32MP13xx DHCOR DHSBC board DT. The MAC address can be fused in BSEC OTP fuses and used to set up MAC address for both ethernet MACs on this board. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-09-05ARM: dts: stm32: Disable PHY clock output on DH STM32MP13xx DHCOR DHSBC boardMarek Vasut
The RTL8211F PHY clock output is not used on DH STM32MP13xx DHCOR DHSBC board, disable it to improve EMI characteristics. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-09-05ARM: dts: stm32: Keep MDIO bus in AF across suspend DH STM32MP13xx DHCOR ↵Marek Vasut
DHSBC board The RTL8211F PHY gets confused when the MDIO bus lines get switched to ANALOG during suspend/resume cycle. Keep the MDIO and MDC lines in AF during suspend/resume to avoid confusing the PHY. The PHY can be brought out of the confused state by restarting auto-negotiation too, but that seems like an odd workaround and shouldn't be in the PHY driver. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-09-05arm64: dts: amlogic: gxlx-s905l-p271: drop saradc gxlx compatibleNeil Armstrong
Drop the undocumented amlogic,meson-gxlx-saradc compatible by dropping the compatible override, and fix the following DTBs check: /soc/bus@c1100000/adc@8680: failed to match any schema with compatible: ['amlogic,meson-gxlx-saradc', 'amlogic,meson-saradc'] Fixes: f6386b5afa81 ("arm64: dts: meson: add GXLX/S905L/p271 support") Link: https://lore.kernel.org/r/20240905-topic-amlogic-upstream-gxlx-drop-iio-compat-v2-1-7a690eb95bc2@linaro.org [narmstrong: fix commit message] Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-09-04arm64: dts: rockchip: remove duplicate nodes from dts for ROCK 4SEFUKAUMI Naoki
these nodes just define same properties in rk3399-rock-pi-4.dtsi. remove them from rk3399-rock-4se.dts. sha256sum rk3399-rock-4se.dtb generates same hash value before/after this change. Fixes: 86a0e14a82ea ("arm64: dts: rockchip: Add Radxa ROCK 4SE") Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://lore.kernel.org/r/20240903073544.2161-1-naoki@radxa.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-09-04arm64: dts: rockchip: Add GameForce AceChris Morgan
The GameForce Ace is a portable gaming device based on the Rockchip RK3588s SoC. The device contains the following hardware that is tested/working: - 128GB eMMC - SDMMC card slot - Ampak SDIO WiFi 5/BT - NVME 2242 socket - 8 or 12GB of RAM - Goodix based touchscreen - Stereo speakers, internal microphone, and TRRS headphone jack. - Dual GPIO vibrators (implemented as gpio-pwm because they are quite strong) - Multiple face buttons, dual analog joysticks, and dual analog triggers - PWM fan with tach pin. The device also contains the following hardware that is partially or currently not working: - 1920x1080 DSI display - HDMI port - USB-C port with DP alt-mode - TI bq25703 charger controller Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20240829204517.398669-4-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-09-04dt-bindings: arm: rockchip: Add GameForce AceChris Morgan
Add devicetree binding for the GameForce Ace. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20240829204517.398669-3-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
generated by cgit (git 2.34.1) at 2025-07-16 03:10:38 +0000