| Age | Commit message (Collapse) | Author |
|---|
|
If we a find that an extent is shared but its end offset is not sector
size aligned, then we don't clone it and issue write operations instead.
This is because the reflink (remap_file_range) operation does not allow
to clone unaligned ranges, except if the end offset of the range matches
the i_size of the source and destination files (and the start offset is
sector size aligned).
While this is not incorrect because send can only guarantee that a file
has the same data in the source and destination snapshots, it's not
optimal and generates confusion and surprising behaviour for users.
For example, running this test:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV
mount $DEV $MNT
# Use a file size not aligned to any possible sector size.
file_size=$((1 * 1024 * 1024 + 5)) # 1MB + 5 bytes
dd if=/dev/random of=$MNT/foo bs=$file_size count=1
cp --reflink=always $MNT/foo $MNT/bar
btrfs subvolume snapshot -r $MNT/ $MNT/snap
rm -f /tmp/send-test
btrfs send -f /tmp/send-test $MNT/snap
umount $MNT
mkfs.btrfs -f $DEV
mount $DEV $MNT
btrfs receive -vv -f /tmp/send-test $MNT
xfs_io -r -c "fiemap -v" $MNT/snap/bar
umount $MNT
Gives the following result:
(...)
mkfile o258-7-0
rename o258-7-0 -> bar
write bar - offset=0 length=49152
write bar - offset=49152 length=49152
write bar - offset=98304 length=49152
write bar - offset=147456 length=49152
write bar - offset=196608 length=49152
write bar - offset=245760 length=49152
write bar - offset=294912 length=49152
write bar - offset=344064 length=49152
write bar - offset=393216 length=49152
write bar - offset=442368 length=49152
write bar - offset=491520 length=49152
write bar - offset=540672 length=49152
write bar - offset=589824 length=49152
write bar - offset=638976 length=49152
write bar - offset=688128 length=49152
write bar - offset=737280 length=49152
write bar - offset=786432 length=49152
write bar - offset=835584 length=49152
write bar - offset=884736 length=49152
write bar - offset=933888 length=49152
write bar - offset=983040 length=49152
write bar - offset=1032192 length=16389
chown bar - uid=0, gid=0
chmod bar - mode=0644
utimes bar
utimes
BTRFS_IOC_SET_RECEIVED_SUBVOL uuid=06d640da-9ca1-604c-b87c-3375175a8eb3, stransid=7
/mnt/sdi/snap/bar:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..2055]: 26624..28679 2056 0x1
There's no clone operation to clone extents from the file foo into file
bar and fiemap confirms there's no shared flag (0x2000).
So update send_write_or_clone() so that it proceeds with cloning if the
source and destination ranges end at the i_size of the respective files.
After this changes the result of the test is:
(...)
mkfile o258-7-0
rename o258-7-0 -> bar
clone bar - source=foo source offset=0 offset=0 length=1048581
chown bar - uid=0, gid=0
chmod bar - mode=0644
utimes bar
utimes
BTRFS_IOC_SET_RECEIVED_SUBVOL uuid=582420f3-ea7d-564e-bbe5-ce440d622190, stransid=7
/mnt/sdi/snap/bar:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..2055]: 26624..28679 2056 0x2001
A test case for fstests will also follow up soon.
Link: https://github.com/kdave/btrfs-progs/issues/572#issuecomment-2282841416
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently the extent map shrinker can be run by any task when attempting
to allocate memory and there's enough memory pressure to trigger it.
To avoid too much latency we stop iterating over extent maps and removing
them once the task needs to reschedule. This logic was introduced in commit
b3ebb9b7e92a ("btrfs: stop extent map shrinker if reschedule is needed").
While that solved high latency problems for some use cases, it's still
not enough because with a too high number of tasks entering the extent map
shrinker code, either due to memory allocations or because they are a
kswapd task, we end up having a very high level of contention on some
spin locks, namely:
1) The fs_info->fs_roots_radix_lock spin lock, which we need to find
roots to iterate over their inodes;
2) The spin lock of the xarray used to track open inodes for a root
(struct btrfs_root::inodes) - on 6.10 kernels and below, it used to
be a red black tree and the spin lock was root->inode_lock;
3) The fs_info->delayed_iput_lock spin lock since the shrinker adds
delayed iputs (calls btrfs_add_delayed_iput()).
Instead of allowing the extent map shrinker to be run by any task, make
it run only by kswapd tasks. This still solves the problem of running
into OOM situations due to an unbounded extent map creation, which is
simple to trigger by direct IO writes, as described in the changelog
of commit 956a17d9d050 ("btrfs: add a shrinker for extent maps"), and
by a similar case when doing buffered IO on files with a very large
number of holes (keeping the file open and creating many holes, whose
extent maps are only released when the file is closed).
Reported-by: kzd <kzd@56709.net>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219121
Reported-by: Octavia Togami <octavia.togami@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAHPNGSSt-a4ZZWrtJdVyYnJFscFjP9S7rMcvEMaNSpR556DdLA@mail.gmail.com/
Fixes: 956a17d9d050 ("btrfs: add a shrinker for extent maps")
CC: stable@vger.kernel.org # 6.10+
Tested-by: kzd <kzd@56709.net>
Tested-by: Octavia Togami <octavia.togami@gmail.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[REPORT]
There is a bug report that kernel is rejecting a mismatching inode mode
and its dir item:
[ 1881.553937] BTRFS critical (device dm-0): inode mode mismatch with
dir: inode mode=040700 btrfs type=2 dir type=0
[CAUSE]
It looks like the inode mode is correct, while the dir item type
0 is BTRFS_FT_UNKNOWN, which should not be generated by btrfs at all.
This may be caused by a memory bit flip.
[ENHANCEMENT]
Although tree-checker is not able to do any cross-leaf verification, for
this particular case we can at least reject any dir type with
BTRFS_FT_UNKNOWN.
So here we enhance the dir type check from [0, BTRFS_FT_MAX), to
(0, BTRFS_FT_MAX).
Although the existing corruption can not be fixed just by such enhanced
checking, it should prevent the same 0x2->0x0 bitflip for dir type to
reach disk in the future.
Reported-by: Kota <nospam@kota.moe>
Link: https://lore.kernel.org/linux-btrfs/CACsxjPYnQF9ZF-0OhH16dAx50=BXXOcP74MxBc3BG+xae4vTTw@mail.gmail.com/
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In the patch 78c52d9eb6b7 ("btrfs: check for refs on snapshot delete
resume") I added some code to handle file systems that had been
corrupted by a bug that incorrectly skipped updating the drop progress
key while dropping a snapshot. This code would check to see if we had
already deleted our reference for a child block, and skip the deletion
if we had already.
Unfortunately there is a bug, as the check would only check the on-disk
references. I made an incorrect assumption that blocks in an already
deleted snapshot that was having the deletion resume on mount wouldn't
be modified.
If we have 2 pending deleted snapshots that share blocks, we can easily
modify the rules for a block. Take the following example
subvolume a exists, and subvolume b is a snapshot of subvolume a. They
share references to block 1. Block 1 will have 2 full references, one
for subvolume a and one for subvolume b, and it belongs to subvolume a
(btrfs_header_owner(block 1) == subvolume a).
When deleting subvolume a, we will drop our full reference for block 1,
and because we are the owner we will drop our full reference for all of
block 1's children, convert block 1 to FULL BACKREF, and add a shared
reference to all of block 1's children.
Then we will start the snapshot deletion of subvolume b. We look up the
extent info for block 1, which checks delayed refs and tells us that
FULL BACKREF is set, so sets parent to the bytenr of block 1. However
because this is a resumed snapshot deletion, we call into
check_ref_exists(). Because check_ref_exists() only looks at the disk,
it doesn't find the shared backref for the child of block 1, and thus
returns 0 and we skip deleting the reference for the child of block 1
and continue. This orphans the child of block 1.
The fix is to lookup the delayed refs, similar to what we do in
btrfs_lookup_extent_info(). However we only care about whether the
reference exists or not. If we fail to find our reference on disk, go
look up the bytenr in the delayed refs, and if it exists look for an
existing ref in the delayed ref head. If that exists then we know we
can delete the reference safely and carry on. If it doesn't exist we
know we have to skip over this block.
This bug has existed since I introduced this fix, however requires
having multiple deleted snapshots pending when we unmount. We noticed
this in production because our shutdown path stops the container on the
system, which deletes a bunch of subvolumes, and then reboots the box.
This gives us plenty of opportunities to hit this issue. Looking at the
history we've seen this occasionally in production, but we had a big
spike recently thanks to faster machines getting jobs with multiple
subvolumes in the job.
Chris Mason wrote a reproducer which does the following
mount /dev/nvme4n1 /btrfs
btrfs subvol create /btrfs/s1
simoop -E -f 4k -n 200000 -z /btrfs/s1
while(true) ; do
btrfs subvol snap /btrfs/s1 /btrfs/s2
simoop -f 4k -n 200000 -r 10 -z /btrfs/s2
btrfs subvol snap /btrfs/s2 /btrfs/s3
btrfs balance start -dusage=80 /btrfs
btrfs subvol del /btrfs/s2 /btrfs/s3
umount /btrfs
btrfsck /dev/nvme4n1 || exit 1
mount /dev/nvme4n1 /btrfs
done
On the second loop this would fail consistently, with my patch it has
been running for hours and hasn't failed.
I also used dm-log-writes to capture the state of the failure so I could
debug the problem. Using the existing failure case to test my patch
validated that it fixes the problem.
Fixes: 78c52d9eb6b7 ("btrfs: check for refs on snapshot delete resume")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
doorbell rings
After napi_complete_done() is called when NAPI is polling in the current
process context, another NAPI may be scheduled and start running in
softirq on another CPU and may ring the doorbell before the current CPU
does. When combined with unnecessary rings when there is no need to arm
the CQ, it triggers error paths in the hardware.
This patch fixes this by calling napi_complete_done() after doorbell
rings. It limits the number of unnecessary rings when there is
no need to arm. MANA hardware specifies that there must be one doorbell
ring every 8 CQ wraparounds. This driver guarantees one doorbell ring as
soon as the number of consumed CQEs exceeds 4 CQ wraparounds. In practical
workloads, the 4 CQ wraparounds proves to be big enough that it rarely
exceeds this limit before all the napi weight is consumed.
To implement this, add a per-CQ counter cq->work_done_since_doorbell,
and make sure the CQ is armed as soon as passing 4 wraparounds of the CQ.
Cc: stable@vger.kernel.org
Fixes: e1b5683ff62e ("net: mana: Move NAPI from EQ to CQ")
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1723219138-29887-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The copy_from_user() function returns the number of bytes which it
was not able to copy. Return -EFAULT instead.
Fixes: dee5a47cc7a4 ("KVM: SEV: Add KVM_SEV_SNP_LAUNCH_UPDATE command")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <20240612115040.2423290-4-dan.carpenter@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
Fix invalid gisa designation value when gisa is not in use.
Panic if (un)share fails to maintain security.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.11, round #1
- Use kvfree() for the kvmalloc'd nested MMUs array
- Set of fixes to address warnings in W=1 builds
- Make KVM depend on assembler support for ARMv8.4
- Fix for vgic-debug interface for VMs without LPIs
- Actually check ID_AA64MMFR3_EL1.S1PIE in get-reg-list selftest
- Minor code / comment cleanups for configuring PAuth traps
- Take kvm->arch.config_lock to prevent destruction / initialization
race for a vCPU's CPUIF which may lead to a UAF
|
|
If snp_lookup_rmpentry() fails then "assigned" is printed in the error
message but it was never initialized. Initialize it to false.
Fixes: dee5a47cc7a4 ("KVM: SEV: Add KVM_SEV_SNP_LAUNCH_UPDATE command")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <20240612115040.2423290-3-dan.carpenter@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Simpler and avoids manual pointer addition.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20240809044957.4534-1-rosenp@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
ath.git patch for v6.11
We have a single patch for the next 6.11-rc which introduces a
workaround to ath12k which addresses a WCN7850 hardware issue that
prevents proper operation with unaligned transmit buffers.
|
|
The code to lookup the scatter gather table entry assumed that it was
possible to use sg_virt() in order to lookup the DMA address in a mapped
scatter gather table. However, this assumption is incorrect as the DMA
mapping code may merge multiple entries into one. In that case, the DMA
address space may have e.g. two consecutive pages which is correctly
represented by the scatter gather list entry, however the virtual
addresses for these two pages may differ and the relationship cannot be
resolved anymore.
Avoid this problem entirely by working with the offset into the mapped
area instead of using virtual addresses. With that we only use the DMA
length and DMA address from the scatter gather list entries. The
underlying DMA/IOMMU code is therefore free to merge two entries into
one even if the virtual addresses space for the area is not continuous.
Fixes: 90db50755228 ("wifi: iwlwifi: use already mapped data when TXing an AMSDU")
Reported-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Closes: https://lore.kernel.org/r/ZrNRoEbdkxkKFMBi@debian.local
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240812110640.460514-1-benjamin@sipsolutions.net
|
|
When disabling wifi mt7921_ipv6_addr_change() is called as a notifier.
At this point mvif->phy is already NULL so we cannot use it here.
Signed-off-by: Bert Karwatzki <spasswolf@web.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240812104542.80760-1-spasswolf@web.de
|
|
Breno Leitao says:
====================
net: netconsole: Fix netconsole unsafe locking
Problem:
=======
The current locking mechanism in netconsole is unsafe and suboptimal due
to the following issues:
1) Lock Release and Reacquisition Mid-Loop:
In netconsole_netdev_event(), the target_list_lock is released and
reacquired within a loop, potentially causing collisions and cleaning up
targets that are being enabled.
int netconsole_netdev_event()
{
...
spin_lock_irqsave(&target_list_lock, flags);
list_for_each_entry(nt, &target_list, list) {
spin_unlock_irqrestore(&target_list_lock, flags);
__netpoll_cleanup(&nt->np);
spin_lock_irqsave(&target_list_lock, flags);
}
spin_lock_irqsave(&target_list_lock, flags);
...
}
2) Non-Atomic Cleanup Operations:
In enabled_store(), the cleanup of structures is not atomic, risking
cleanup of structures that are in the process of being enabled.
size_t enabled_store()
{
...
spin_lock_irqsave(&target_list_lock, flags);
nt->enabled = false;
spin_unlock_irqrestore(&target_list_lock, flags);
netpoll_cleanup(&nt->np);
...
}
These issues stem from the following limitations in netconsole's locking
design:
1) write_{ext_}msg() functions:
a) Cannot sleep
b) Must iterate through targets and send messages to all enabled entries.
c) List iteration is protected by target_list_lock spinlock.
2) Network event handling in netconsole_netdev_event():
a) Needs to sleep
b) Requires iteration over the target list (holding
target_list_lock spinlock).
c) Some events necessitate netpoll struct cleanup, which *needs*
to sleep.
The target_list_lock needs to be used by non-sleepable functions while
also protecting operations that may sleep, leading to the current unsafe
design.
Solution:
========
1) Dual Locking Mechanism:
- Retain current target_list_lock for non-sleepable use cases.
- Introduce target_cleanup_list_lock (mutex) for sleepable
operations.
2) Deferred Cleanup:
- Implement atomic, deferred cleanup of structures using the new
mutex (target_cleanup_list_lock).
- Avoid the `goto` in the middle of the list_for_each_entry
3) Separate Cleanup List:
- Create target_cleanup_list for deferred cleanup, protected by
target_cleanup_list_lock.
- This allows cleanup() to sleep without affecting message
transmission.
- When iterating over targets, move devices needing cleanup to
target_cleanup_list.
- Handle cleanup under the target_cleanup_list_lock mutex.
4) Make a clear locking hierarchy
- The target_cleanup_list_lock takes precedence over target_list_lock.
- Major Workflow Locking Sequences:
a) Network Event Affecting Netpoll (netconsole_netdev_event):
rtnl -> target_cleanup_list_lock -> target_list_lock
b) Message Writing (write_msg()):
console_lock -> target_list_lock
c) Configfs Target Enable/Disable (enabled_store()):
dynamic_netconsole_mutex -> target_cleanup_list_lock -> target_list_lock
This hierarchy ensures consistent lock acquisition order across
different operations, preventing deadlocks and maintaining proper
synchronization. The target_cleanup_list_lock's higher priority allows
for safe deferred cleanup operations without interfering with regular
message transmission protected by target_list_lock. Each workflow
follows a specific locking sequence, ensuring that operations like
network event handling, message writing, and target management are
properly synchronized and do not conflict with each other.
Changelog:
v3:
* Move netconsole_process_cleanups() function to inside
CONFIG_NETCONSOLE_DYNAMIC block, avoiding Werror=unused-function
(Jakub)
v2:
* The selftest has been removed from the patchset because veth is now
IFF_DISABLE_NETPOLL. A new test will be sent separately.
* https://lore.kernel.org/all/20240807091657.4191542-1-leitao@debian.org/
v1:
* https://lore.kernel.org/all/20240801161213.2707132-1-leitao@debian.org/
====================
Link: https://patch.msgid.link/20240808122518.498166-1-leitao@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
traversal
Current issue:
- The `target_list_lock` spinlock is held while iterating over
target_list() entries.
- Mid-loop, the lock is released to call __netpoll_cleanup(), then
reacquired.
- This practice compromises the protection provided by
`target_list_lock`.
Reason for current design:
1. __netpoll_cleanup() may sleep, incompatible with holding a spinlock.
2. target_list_lock must be a spinlock because write_msg() cannot sleep.
(See commit b5427c27173e ("[NET] netconsole: Support multiple logging
targets"))
Defer the cleanup of the netpoll structure to outside the
target_list_lock() protected area. Create another list
(target_cleanup_list) to hold the entries that need to be cleaned up,
and clean them using a mutex (target_cleanup_list_lock).
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The return flow in netconsole's dynamic functions is currently
inconsistent. This patch aims to streamline and standardize the process
by ensuring that the mutex is unlocked before returning the ret value.
Additionally, this update includes a minor functional change where
certain strnlen() operations are performed with the
dynamic_netconsole_mutex locked. This adjustment is not anticipated to
cause any issues, however, it is crucial to document this change for
clarity.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Update variable names from err to ret in cases where the variable may
return non-error values.
This change facilitates a forthcoming patch that relies on ret being
used consistently to handle return values, regardless of whether they
indicate an error or not.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
netconsole incorrectly mixes int and ssize_t types by using int for
return variables in functions that should return ssize_t.
This is fixed by updating the return variables to the appropriate
ssize_t type, ensuring consistency across the function definitions.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Extract the core part of netpoll_cleanup(), so, it could be called from
a caller that has the rtnl lock already.
Netconsole uses this in a weird way right now:
__netpoll_cleanup(&nt->np);
spin_lock_irqsave(&target_list_lock, flags);
netdev_put(nt->np.dev, &nt->np.dev_tracker);
nt->np.dev = NULL;
nt->enabled = false;
This will be replaced by do_netpoll_cleanup() as the locking situation
is overhauled.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Yanteng Si says:
====================
stmmac: Add Loongson platform support
v17:
* As Serge's comments:
Add return 0 for _dt_config().
Get back the conditional MSI-clear method execution.
v16:
* As Serge's comments:
Move the of_node_put(plat->mdio_node) call to the DT-config/clear methods.
Drop 'else if'.
* Modify the commit message of 7/14. (LS2K CPU -> LS2K SOC)
V15:
* Drop return that will not be executed.
* Move pdev from patch 12 to patch 13 to pass W=1 builds.
RFC v15:
* As Serge's comments:
Extend the commit message.(patch 7 and patch 11)
Add fixes tag for patch 8.
Add loongson_dwmac_dt_clear() patch.
Modify loongson_dwmac_msi_config().
...
* Pick Huacai's Acked-by tag.
* Pick Serge's Reviewed-by tag.
* I have already contacted the author(ZhangQing) of the module,
so I copied her valid email: diasyzhang@tencent.com.
Note:
I replied to the comments on v14 last Sunday, but all of Loongson's
email servers failed to deliver. The network administrator told me
today that he has fixed the problem and re-delivered all the failed
emails, but I did not see them on the mailing list. I hope they will
not suddenly appear in everyone's mailbox one day. I apologize for
this. (The email content mainly agrees with Serge's suggestion.)
v14:
Because Loongson GMAC can be also found with the 8-channels AV feature
enabled, we'll need to reconsider the patches logic and thus the
commit logs too. As Serge's comments and Russell's comments:
[PATCH net-next v14 01/15] net: stmmac: Move the atds flag to the stmmac_dma_cfg structure
[PATCH net-next v14 02/15] net: stmmac: Add multi-channel support
[PATCH net-next v14 03/15] net: stmmac: Export dwmac1000_dma_ops
[PATCH net-next v14 04/15] net: stmmac: dwmac-loongson: Drop duplicated hash-based filter size init
[PATCH net-next v14 05/15] net: stmmac: dwmac-loongson: Drop pci_enable/disable_msi calls
[PATCH net-next v14 06/15] net: stmmac: dwmac-loongson: Use PCI_DEVICE_DATA() macro for device identification
[PATCH net-next v14 07/15] net: stmmac: dwmac-loongson: Detach GMAC-specific platform data init
+-> Init the plat_stmmacenet_data::{tx_queues_to_use,rx_queues_to_use}
in the loongson_gmac_data() method.
[PATCH net-next v14 08/15] net: stmmac: dwmac-loongson: Init ref and PTP clocks rate
[PATCH net-next v14 09/15] net: stmmac: dwmac-loongson: Add phy_interface for Loongson GMAC
[PATCH net-next v14 10/15] net: stmmac: dwmac-loongson: Introduce PCI device info data
+-> Make sure the setup() method is called after the pci_enable_device()
invocation.
[PATCH net-next v14 11/15] net: stmmac: dwmac-loongson: Add DT-less GMAC PCI-device support
+-> Introduce the loongson_dwmac_dt_config() method here instead of
doing that in a separate patch.
+-> Add loongson_dwmac_acpi_config() which would just get the IRQ from
the pdev->irq field and make sure it is valid.
[PATCH net-next v14 12/15] net: stmmac: Fixed failure to set network speed to 1000.
+-> Drop the patch as Russell's comments, At the same time, he provided another
better repair suggestion, and I decided to send it separately after the
patch set was merged. See:
<https://lore.kernel.org/netdev/ZoW1fNqV3PxEobFx@shell.armlinux.org.uk/>
[PATCH net-next v14 13/15] net: stmmac: dwmac-loongson: Add Loongson Multi-channels GMAC support
+-> This is former "net: stmmac: dwmac-loongson: Add Loongson GNET
support" patch, but which adds the support of the Loongson GMAC with the
8-channels AV-feature available.
+-> loongson_dwmac_intx_config() shall be dropped due to the
loongson_dwmac_acpi_config() method added in the PATCH 11/15.
+-> Make sure loongson_data::loongson_id is initialized before the
stmmac_pci_info::setup() is called.
+-> Move the rx_queues_to_use/tx_queues_to_use and coe_unsupported
fields initialization to the loongson_gmac_data() method.
+-> As before, call the loongson_dwmac_msi_config() method if the multi-channels
Loongson MAC has been detected.
+-> Move everything GNET-specific to the next patch.
[PATCH net-next v14 14/15] net: stmmac: dwmac-loongson: Add Loongson GNET support
+-> Everything Loonsgson GNET-specific is supposed to be added in the
framework of this patch:
+ PCI_DEVICE_ID_LOONGSON_GNET macro
+ loongson_gnet_fix_speed() method
+ loongson_gnet_data() method
+ loongson_gnet_pci_info data
+ The GNET-specific part of the loongson_dwmac_setup() method.
+ ...
[PATCH net-next v14 15/15] net: stmmac: dwmac-loongson: Add loongson module author
Other's:
Pick Serge's Reviewed-by tag.
v13:
* Sorry, we have clarified some things in the past 10 days. I did not
give you a clear reply to the following questions in v12, so I need
to reply again:
1. The current LS2K2000 also have a GMAC(and two GNET) that supports 8
channels, so we have to reconsider the initialization of
tx/rx_queues_to_use into probe();
2. In v12, we disagreed on the loongson_dwmac_msi_config method, but I changed
it based on Serge's comments(If I understand correctly):
if (dev_of_node(&pdev->dev)) {
ret = loongson_dwmac_dt_config(pdev, plat, &res);
}
if (ld->loongson_id == DWMAC_CORE_LS2K2000) {
ret = loongson_dwmac_msi_config(pdev, plat, &res);
} else {
ret = loongson_dwmac_intx_config(pdev, plat, &res);
}
3. Our priv->dma_cap.pcs is false, so let's use PHY_INTERFACE_MODE_NA;
4. Our GMAC does not support Delay, so let's use PHY_INTERFACE_MODE_RGMII_ID,
the current dts is wrong, a fix patch will be sent to the LoongArch list
later.
Others:
* Re-split a part of the patch (it seems we do this with every version);
* Copied Serge's comments into the commit message of patch;
* Fixed the stmmac_dma_operation_mode() method;
* Changed some code comments.
v12:
* The biggest change is the re-splitting of patches.
* Add a "gmac_version" in loongson_data, then we only
read it once in the _probe().
* Drop Serge's patch.
* Rebase to the latest code state.
* Fixed the gnet commit message.
v11:
* Break loongson_phylink_get_caps(), fix bad logic.
* Remove a unnecessary ";".
* Remove some unnecessary "{}".
* add a blank.
* Move the code of fix _force_1000 to patch 6/6.
The main changes occur in these two functions:
loongson_dwmac_probe();
loongson_dwmac_setup();
v10:
As Andrew's comment:
* Add a #define for the 0x37.
* Add a #define for Port Select.
others:
* Pick Serge's patch, This patch resulted from the process
of reviewing our patch set.
* Based on Serge's patch, modify our loongson_phylink_get_caps().
* Drop patch 3/6, we need mac_interface.
* Adjusted the code layout of gnet patch.
* Corrected several errata in commit message.
* Move DISABLE_FORCE flag to loongson_gnet_data().
v9:
We have not provided a detailed list of equipment for a long time,
and I apologize for this. During this period, I have collected some
information and now present it to you, hoping to alleviate the pressure
of review.
1. IP core
We now have two types of IP cores, one is 0x37, similar to dwmac1000;
The other is 0x10. Compared to 0x37, we split several DMA registers
from one to two, and it is not worth adding a new entry for this.
According to Serge's comment, we made these devices work by overwriting
priv->synopsys_id = 0x37 and mac->dma = <LS_dma_ops>.
1.1. Some more detailed information
The number of DMA channels for 0x37 is 1; The number of DMA channels
for 0x10 is 8. Except for channel 0, otherchannels do not support
sending hardware checksums. Supported AV features are Qav, Qat, and Qas,
and the rest are consistent with 3.73.
2. DEVICE
We have two types of devices,
one is GMAC, which only has a MAC chip inside and needs an external PHY
chip;
the other is GNET, which integrates both MAC and PHY chips inside.
2.1. Some more detailed information
GMAC device: LS7A1000, LS2K1000, these devices do not support any pause
mode.
gnet device: LS7A2000, LS2K2000, the chip connection between the mac and
phy of these devices is not normal and requires two rounds of
negotiation; LS7A2000 does not support half-duplex and
multi-channel;
to enable multi-channel on LS2K2000, you need to turn off
hardware checksum.
**Note**: Only the LS2K2000's IP core is 0x10, while the IP cores of other
devices are 0x37.
3. TABLE
device type pci_id ip_core
ls7a1000 gmac 7a03 0x35/0x37
ls2k1000 gmac 7a03 0x35/0x37
ls7a2000 gnet 7a13 0x37
ls2k2000 gnet 7a13 0x10
-----------------------------------------------
Changes:
* passed the CI
<https://github.com/linux-netdev/nipa/blob/main/tests/patch/checkpatch
/checkpatch.sh>
* reverse xmas tree order.
* Silence build warning.
* Re-split the patch.
* Add more detailed commit message.
* Add more code comment.
* Reduce modification of generic code.
* using the GNET-specific prefix.
* define a new macro for the GNET MAC.
* Use an easier way to overwrite mac.
* Removed some useless printk.
v8:
* The biggest change is according to Serge's comment in the previous
edition:
Seeing the patch in the current state would overcomplicate the generic
code and the only functions you need to update are
dwmac_dma_interrupt()
dwmac1000_dma_init_channel()
you can have these methods re-defined with all the Loongson GNET
specifics in the low-level platform driver (dwmac-loongson.c). After
that you can just override the mac_device_info.dma pointer with a
fixed stmmac_dma_ops descriptor. Here is what should be done for that:
1. Keep the Patch 4/9 with my comments fixed. First it will be partly
useful for your GNET device. Second in general it's a correct
implementation of the normal DW GMAC v3.x multi-channels feature and
will be useful for the DW GMACs with that feature enabled.
2. Create the Loongson GNET-specific
stmmac_dma_ops.dma_interrupt()
stmmac_dma_ops.init_chan()
methods in the dwmac-loongson.c driver. Don't forget to move all the
Loongson-specific macros from dwmac_dma.h to dwmac-loongson.c.
3. Create a Loongson GNET-specific platform setup method with the next
semantics:
+ allocate stmmac_dma_ops instance and initialize it with
dwmac1000_dma_ops.
+ override the stmmac_dma_ops.{dma_interrupt, init_chan} with
the pointers to the methods defined in 2.
+ allocate mac_device_info instance and initialize the
mac_device_info.dma field with a pointer to the new
stmmac_dma_ops instance.
+ call dwmac1000_setup() or initialize mac_device_info in a way
it's done in dwmac1000_setup() (the later might be better so you
wouldn't need to export the dwmac1000_setup() function).
+ override stmmac_priv.synopsys_id with a correct value.
4. Initialize plat_stmmacenet_data.setup() with the pointer to the
method created in 3.
* Others:
Re-split the patch.
Passed checkpatch.pl test.
v7:
* Refer to andrew's suggestion:
- Add DMA_INTR_ENA_NIE_RX and DMA_INTR_ENA_NIE_TX #define's, etc.
* Others:
- Using --subject-prefix="PATCH net-next vN" to indicate that the
patches are for the networking tree.
- Rebase to the latest networking tree:
<git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git>
v6:
* Refer to Serge's suggestion:
- Add new platform feature flag:
include/linux/stmmac.h:
+#define STMMAC_FLAG_HAS_LGMAC BIT(13)
- Add the IRQs macros specific to the Loongson Multi-channels GMAC:
drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h:
+#define DMA_INTR_ENA_NIE_LOONGSON 0x00060000 /* ...*/
#define DMA_INTR_ENA_NIE 0x00010000 /* Normal Summary */
...
- Drop all of redundant changes that don't require the
prototypes being converted to accepting the stmmac_priv
pointer.
* Refer to andrew's suggestion:
- Drop white space changes.
- break patch up into lots of smaller parts.
Some small patches have been put into another series as a preparation
see <https://lore.kernel.org/loongarch/cover.1702289232.git.siyanteng@loongson.cn/T/#t>
*note* : This series of patches relies on the three small patches above.
* others
- Drop irq_flags changes.
- Changed patch order.
v4 -> v5:
* Remove an ugly and useless patch (fix channel number).
* Remove the non-standard dma64 driver code, and also remove
the HWIF entries, since the associated custom callbacks no
longer exist.
* Refer to Serge's suggestion: Update the dwmac1000_dma.c to
support the multi-DMA-channels controller setup.
See:
v4: <https://lore.kernel.org/loongarch/cover.1692696115.git.chenfeiyang@loongson.cn/>
v3: <https://lore.kernel.org/loongarch/cover.1691047285.git.chenfeiyang@loongson.cn/>
v2: <https://lore.kernel.org/loongarch/cover.1690439335.git.chenfeiyang@loongson.cn/>
v1: <https://lore.kernel.org/loongarch/cover.1689215889.git.chenfeiyang@loongson.cn/>
====================
Link: https://patch.msgid.link/cover.1723014611.git.siyanteng@loongson.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add Yanteng Si as MODULE_AUTHOR of Loongson DWMAC PCI driver.
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The new generation Loongson LS2K2000 SoC and LS7A2000 chipset are
equipped with the network controllers called Loongson GNET. It's the
single and multi DMA-channels Loongson GMAC but with a PHY attached.
Here is the summary of the DW GMAC features the controller has:
DW GMAC IP-core: v3.73a
Speeds: 10/100/1000Mbps
Duplex: Full (both versions), Half (LS2K2000 GNET only)
DMA-descriptors type: enhanced
L3/L4 filters availability: Y
VLAN hash table filter: Y
PHY-interface: GMII (PHY is integrated into the chips)
Remote Wake-up support: Y
Mac Management Counters (MMC): Y
Number of additional MAC addresses: 5
MAC Hash-based filter: Y
Hash Table Size: 256
AV feature: Y (LS2K2000 GNET only)
DMA channels: 8 (LS2K2000 GNET), 1 (LS7A2000 GNET)
Let's update the Loongson DWMAC driver to supporting the new Loongson
GNET controller. The change is mainly trivial: the driver shall be
bound to the PCIe device with DID 0x7a13, and the device-specific
setup() method shall be called for it. The only peculiarity concerns
the integrated PHY speed change procedure. The PHY has a weird problem
with switching from the low speeds to 1000Mbps mode. The speedup
procedure requires the PHY-link re-negotiation. So the suggested
change provide the device-specific fix_mac_speed() method to overcome
the problem.
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The Loongson DWMAC driver currently supports the Loongson GMAC
devices (based on the DW GMAC v3.50a/v3.73a IP-core) installed to the
LS2K1000 SoC and LS7A1000 chipset. But recently a new generation
LS2K2000 SoC was released with the new version of the Loongson GMAC
synthesized in. The new controller is based on the DW GMAC v3.73a
IP-core with the AV-feature enabled, which implies the multi
DMA-channels support. The multi DMA-channels feature has the next
vendor-specific peculiarities:
1. Split up Tx and Rx DMA IRQ status/mask bits:
Name Tx Rx
DMA_INTR_ENA_NIE = 0x00040000 | 0x00020000;
DMA_INTR_ENA_AIE = 0x00010000 | 0x00008000;
DMA_STATUS_NIS = 0x00040000 | 0x00020000;
DMA_STATUS_AIS = 0x00010000 | 0x00008000;
DMA_STATUS_FBI = 0x00002000 | 0x00001000;
2. Custom Synopsys ID hardwired into the GMAC_VERSION.SNPSVER register
field. It's 0x10 while it should have been 0x37 in accordance with
the actual DW GMAC IP-core version.
3. There are eight DMA-channels available meanwhile the Synopsys DW
GMAC IP-core supports up to three DMA-channels.
4. It's possible to have each DMA-channel IRQ independently delivered.
The MSI IRQs must be utilized for that.
Thus in order to have the multi-channels Loongson GMAC controllers
supported let's modify the Loongson DWMAC driver in accordance with
all the peculiarities described above:
1. Create the multi-channels Loongson GMAC-specific
stmmac_dma_ops::dma_interrupt()
stmmac_dma_ops::init_chan()
callbacks due to the non-standard DMA IRQ CSR flags layout.
2. Create the Loongson DWMAC-specific platform setup() method
which gets to initialize the DMA-ops with the dwmac1000_dma_ops
instance and overrides the callbacks described in 1. The method also
overrides the custom Synopsys ID with the real one in order to have
the rest of the HW-specific callbacks correctly detected by the driver
core.
3. Make sure the platform setup() method enables the flow control and
duplex modes supported by the controller.
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The Loongson GMAC driver currently supports the network controllers
installed on the LS2K1000 SoC and LS7A1000 chipset, for which the GMAC
devices are required to be defined in the platform device tree source.
But Loongson machines may have UEFI (implies ACPI) or PMON/UBOOT
(implies FDT) as the system bootloaders. In order to have both system
configurations support let's extend the driver functionality with the
case of having the Loongson GMAC probed on the PCI bus with no device
tree node defined for it. That requires to make the device DT-node
optional, to rely on the IRQ line detected by the PCI core and to
have the MDIO bus ID calculated using the PCIe Domain+BDF numbers.
In order to have the device probe() and remove() methods less
complicated let's move the DT- and ACPI-specific code to the
respective sub-functions.
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The Loongson GNET device support is about to be added in one of the
next commits. As another preparation for that introduce the PCI device
info data with a setup() callback performing the device-specific
platform data initializations. Currently it is utilized for the
already supported Loongson GMAC device only.
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
PHY-interface of the Loongson GMAC device is RGMII with no internal
delays added to the data lines signal. So to comply with that let's
pre-initialize the platform-data field with the respective enum
constant.
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Reference and PTP clocks rate of the Loongson GMAC devices is 125MHz.
(So is in the GNET devices which support is about to be added.) Set
the respective plat_stmmacenet_data field up in accordance with that
so to have the coalesce command and timestamping work correctly.
Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Loongson delivers two types of the network devices: Loongson GMAC and
Loongson GNET in the framework of four SOC/Chipsets revisions:
Chip Network PCI Dev ID Synopys Version DMA-channel
LS2K1000 SOC GMAC 0x7a03 v3.50a/v3.73a 1
LS7A1000 Chipset GMAC 0x7a03 v3.50a/v3.73a 1
LS2K2000 SOC GMAC 0x7a03 v3.73a 8
LS2K2000 SOC GNET 0x7a13 v3.73a 8
LS7A2000 Chipset GNET 0x7a13 v3.73a 1
The driver currently supports the chips with the Loongson GMAC network
device synthesized with a single DMA-channel available. As a
preparation before adding the Loongson GNET support detach the
Loongson GMAC-specific platform data initializations to the
loongson_gmac_data() method and preserve the common settings in the
loongson_default_data().
While at it drop the return value statement from the
loongson_default_data() method as redundant.
Note there is no intermediate vendor-specific PCS in between the MAC
and PHY on Loongson GMAC and GNET. So the plat->mac_interface field
can be freely initialized with the PHY_INTERFACE_MODE_NA value.
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
identification
For the readability sake convert the hard-coded Loongson GMAC PCI ID to
the respective macro and use the PCI_DEVICE_DATA() macro-function to
create the pci_device_id array entry. The later change will be
specifically useful in order to assign the device-specific data for the
currently supported device and for about to be added Loongson GNET
controller.
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The Loongson GMAC driver currently doesn't utilize the MSI IRQs, but
retrieves the IRQs specified in the device DT-node. Let's drop the
direct pci_enable_msi()/pci_disable_msi() calls then as redundant
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The plat_stmmacenet_data::multicast_filter_bins field is twice
initialized in the loongson_default_data() method. Drop the redundant
initialization, but for the readability sake keep the filters init
statements defined in the same place of the method.
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Export the DW GMAC DMA-ops descriptor so one could be available in
the low-level platform drivers. It will be utilized to override some
callbacks in order to handle the LS2K2000 GNET device specifics. The
GNET controller support is being added in one of the following up
commits.
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
DW GMAC v3.73 can be equipped with the Audio Video (AV) feature which
enables transmission of time-sensitive traffic over bridged local area
networks (DWC Ethernet QoS Product). In that case there can be up to two
additional DMA-channels available with no Tx COE support (unless there is
vendor-specific IP-core alterations). Each channel is implemented as a
separate Control and Status register (CSR) for managing the transmit and
receive functions, descriptor handling, and interrupt handling.
Add the multi-channels DW GMAC controllers support just by making sure the
already implemented DMA-configs are performed on the per-channel basis.
Note the only currently known instance of the multi-channel DW GMAC
IP-core is the LS2K2000 GNET controller, which has been released with the
vendor-specific feature extension of having eight DMA-channels. The device
support will be added in one of the following up commits.
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ATDS (Alternate Descriptor Size) is a part of the DMA Bus Mode configs
(together with PBL, ALL, EME, etc) of the DW GMAC controllers. Seeing
it's not changed at runtime but is activated as long as the IP-core
has it supported (at least due to the Type 2 Full Checksum Offload
Engine feature), move the respective parameter from the
stmmac_dma_ops::init() callback argument to the stmmac_dma_cfg
structure, which already have the rest of the DMA-related configs
defined.
Besides the being added in the next commit DW GMAC multi-channels
support will require to add the stmmac_dma_ops::init_chan() callback
and have the ATDS flag set/cleared for each channel in there. Having
the atds-flag in the stmmac_dma_cfg structure will make the parameter
accessible from stmmac_dma_ops::init_chan() callback too.
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 9748dbc9f265 ("net/smc: Avoid -Wflex-array-member-not-at-end
warnings") introduced tagged `struct smc_clc_v2_extension_fixed` and
`struct smc_clc_smcd_v2_extension_fixed`. We want to ensure that when
new members need to be added to the flexible structures, they are
always included within these tagged structs.
So, we use `static_assert()` to ensure that the memory layout for
both the flexible structure and the tagged struct is the same after
any changes.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jan Karcher <jaka@linux.ibm.com>
Link: https://patch.msgid.link/ZrVBuiqFHAORpFxE@cute
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit d88cabfd9abc ("nfp: Avoid -Wflex-array-member-not-at-end
warnings") introduced tagged `struct nfp_dump_tl_hdr`. We want
to ensure that when new members need to be added to the flexible
structure, they are always included within this tagged struct.
So, we use `static_assert()` to ensure that the memory layout for
both the flexible structure and the tagged struct is the same after
any changes.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/ZrVB43Hen0H5WQFP@cute
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In macb_suspend(), idev->ifa_list is fetched with rcu_access_pointer()
and later the pointer is dereferenced as ifa->ifa_local.
So, idev->ifa_list must be fetched with rcu_dereference().
Fixes: 0cb8de39a776 ("net: macb: Add ARP support to WOL")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240808040021.6971-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A selftest is added such that without the previous patch,
a crash can happen. With the previous patch, the test can
run successfully. The new test is written in a way which
mimics original crash case:
main_prog
static_prog_1
static_prog_2
where static_prog_1 has different paths to static_prog_2
and some path has stack allocated and some other path
does not. A stacksafe() checking in static_prog_2()
triggered the crash.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240812214852.214037-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Daniel Hodges reported a kernel verifier crash when playing with sched-ext.
Further investigation shows that the crash is due to invalid memory access
in stacksafe(). More specifically, it is the following code:
if (exact != NOT_EXACT &&
old->stack[spi].slot_type[i % BPF_REG_SIZE] !=
cur->stack[spi].slot_type[i % BPF_REG_SIZE])
return false;
The 'i' iterates old->allocated_stack.
If cur->allocated_stack < old->allocated_stack the out-of-bound
access will happen.
To fix the issue add 'i >= cur->allocated_stack' check such that if
the condition is true, stacksafe() should fail. Otherwise,
cur->stack[spi].slot_type[i % BPF_REG_SIZE] memory access is legal.
Fixes: 2793a8b015f7 ("bpf: exact states comparison for iterator convergence checks")
Cc: Eduard Zingerman <eddyz87@gmail.com>
Reported-by: Daniel Hodges <hodgesd@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240812214847.213612-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Remove unnecessary flex-array member `pad[]` and refactor the related
code a bit.
Fix the following warning:
net/sched/act_ct.c:57:29: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/ZrY0JMVsImbDbx6r@cute
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Petr Machata says:
====================
net: nexthop: Increase weight to u16
In CLOS networks, as link failures occur at various points in the network,
ECMP weights of the involved nodes are adjusted to compensate. With high
fan-out of the involved nodes, and overall high number of nodes,
a (non-)ECMP weight ratio that we would like to configure does not fit into
8 bits. Instead of, say, 255:254, we might like to configure something like
1000:999. For these deployments, the 8-bit weight may not be enough.
To that end, in this patchset increase the next hop weight from u8 to u16.
Patch #1 adds a flag that indicates whether the reserved fields are zeroed.
This is a follow-up to a new fix merged in commit 6d745cd0e972 ("net:
nexthop: Initialize all fields in dumped nexthops"). The theory behind this
patch is that there is a strict ordering between the fields actually being
zeroed, the kernel declaring that they are, and the kernel repurposing the
fields. Thus clients can use the flag to tell if it is safe to interpret
the reserved fields in any way.
Patch #2 contains the substantial code and the commit message covers the
details of the changes.
Patches #3 to #6 add selftests.
====================
Link: https://patch.msgid.link/cover.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests that attempt to create NH groups that use full 16 bits of NH
weight.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/101cdd3f2bfd9511c9bec95f909d20ff56f70ba5.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests that exercise full 16 bits of NH weight.
Like in the previous patch, omit the 255:65535 test when KSFT_MACHINE_SLOW.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/a91d6ead9d1b1b4b7e276ca58a71ef814f42b7dd.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests that exercise full 16 bits of NH weight.
To test the 255:65535, it is necessary to run more packets than for the
other tests. On a debug kernel, the test can take up to a minute, therefore
avoid the test when KSFT_MACHINE_SLOW.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/c0c257c00ad30b07afc3fa5e2afd135925405544.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the context of an offloaded datapath, it may take a while for the ip
link stats to be updated. This causes the test to fail when MZ_DELAY is too
low. Sleep after the packets are sent for the link stats to get up to date.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/8b1971d948273afd7de2da3d6a2ba35200540e55.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In CLOS networks, as link failures occur at various points in the network,
ECMP weights of the involved nodes are adjusted to compensate. With high
fan-out of the involved nodes, and overall high number of nodes,
a (non-)ECMP weight ratio that we would like to configure does not fit into
8 bits. Instead of, say, 255:254, we might like to configure something like
1000:999. For these deployments, the 8-bit weight may not be enough.
To that end, in this patch increase the next hop weight from u8 to u16.
Increasing the width of an integral type can be tricky, because while the
code still compiles, the types may not check out anymore, and numerical
errors come up. To prevent this, the conversion was done in two steps.
First the type was changed from u8 to a single-member structure, which
invalidated all uses of the field. This allowed going through them one by
one and audit for type correctness. Then the structure was replaced with a
vanilla u16 again. This should ensure that no place was missed.
The UAPI for configuring nexthop group members is that an attribute
NHA_GROUP carries an array of struct nexthop_grp entries:
struct nexthop_grp {
__u32 id; /* nexthop id - must exist */
__u8 weight; /* weight of this nexthop */
__u8 resvd1;
__u16 resvd2;
};
The field resvd1 is currently validated and required to be zero. We can
lift this requirement and carry high-order bits of the weight in the
reserved field:
struct nexthop_grp {
__u32 id; /* nexthop id - must exist */
__u8 weight; /* weight of this nexthop */
__u8 weight_high;
__u16 resvd2;
};
Keeping the fields split this way was chosen in case an existing userspace
makes assumptions about the width of the weight field, and to sidestep any
endianness issues.
The weight field is currently encoded as the weight value minus one,
because weight of 0 is invalid. This same trick is impossible for the new
weight_high field, because zero must mean actual zero. With this in place:
- Old userspace is guaranteed to carry weight_high of 0, therefore
configuring 8-bit weights as appropriate. When dumping nexthops with
16-bit weight, it would only show the lower 8 bits. But configuring such
nexthops implies existence of userspace aware of the extension in the
first place.
- New userspace talking to an old kernel will work as long as it only
attempts to configure 8-bit weights, where the high-order bits are zero.
Old kernel will bounce attempts at configuring >8-bit weights.
Renaming reserved fields as they are allocated for some purpose is commonly
done in Linux. Whoever touches a reserved field is doing so at their own
risk. nexthop_grp::resvd1 in particular is currently used by at least
strace, however they carry an own copy of UAPI headers, and the conversion
should be trivial. A helper is provided for decoding the weight out of the
two fields. Forcing a conversion seems preferable to bending backwards and
introducing anonymous unions or whatever.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/483e2fcf4beb0d9135d62e7d27b46fa2685479d4.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are many unpatched kernel versions out there that do not initialize
the reserved fields of struct nexthop_grp. The issue with that is that if
those fields were to be used for some end (i.e. stop being reserved), old
kernels would still keep sending random data through the field, and a new
userspace could not rely on the value.
In this patch, use the existing NHA_OP_FLAGS, which is currently inbound
only, to carry flags back to the userspace. Add a flag to indicate that the
reserved fields in struct nexthop_grp are zeroed before dumping. This is
reliant on the actual fix from commit 6d745cd0e972 ("net: nexthop:
Initialize all fields in dumped nexthops").
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/21037748d4f9d8ff486151f4c09083bcf12d5df8.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
as it doesn't seem to offer anything of value.
There's only 1 trivial user:
int lowpan_ndisc_is_useropt(u8 nd_opt_type) {
return nd_opt_type == ND_OPT_6CO;
}
but there's no harm to always treating that as
a useropt...
Cc: David Ahern <dsahern@kernel.org>
Cc: YOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://patch.msgid.link/20240730003010.156977-1-maze@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jakub Kicinski says:
====================
eth: fbnic: add basic stats
Add basic interface stats to fbnic.
v1: https://lore.kernel.org/20240807022631.1664327-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20240810054322.2766421-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement netdev_stat_ops and export the basic per-queue stats.
This interface expect users to set the values that are used
either to zero or to some other preserved value (they are 0xff by
default). So here we export bytes/packets/drops from tx and rx_stats
plus set some of the values that are exposed by queue stats
to zero.
$ cd tools/testing/selftests/drivers/net && ./stats.py
[...]
Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20240810054322.2766421-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
