summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-02-06ethtool: add ethtool_rx_flow_spec to flow_rule structure translatorPablo Neira Ayuso
This patch adds a function to translate the ethtool_rx_flow_spec structure to the flow_rule representation. This allows us to reuse code from the driver side given that both flower and ethtool_rx_flow interfaces use the same representation. This patch also includes support for the flow type flags FLOW_EXT, FLOW_MAC_EXT and FLOW_RSS. The ethtool_rx_flow_spec_input wrapper structure is used to convey the rss_context field, that is away from the ethtool_rx_flow_spec structure, and the ethtool_rx_flow_spec structure. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06flow_offload: add wake-up-on-lan and queue to flow_actionPablo Neira Ayuso
These actions need to be added to support the ethtool_rx_flow interface. The queue action includes a field to specify the RSS context, that is set via FLOW_RSS flow type flag and the rss_context field in struct ethtool_rxnfc, plus the corresponding queue index. FLOW_RSS implies that rss_context is non-zero, therefore, queue.ctx == 0 means that FLOW_RSS was not set. Also add a field to store the vf index which is stored in the ethtool_rxnfc ring_cookie field. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06cls_flower: don't expose TC actions to drivers anymorePablo Neira Ayuso
Now that drivers have been converted to use the flow action infrastructure, remove this field from the tc_cls_flower_offload structure. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06drivers: net: use flow action infrastructurePablo Neira Ayuso
This patch updates drivers to use the new flow action infrastructure. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06flow_offload: add statistics retrieval infrastructure and use itPablo Neira Ayuso
This patch provides the flow_stats structure that acts as container for tc_cls_flower_offload, then we can use to restore the statistics on the existing TC actions. Hence, tcf_exts_stats_update() is not used from drivers anymore. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06cls_api: add translator to flow_action representationPablo Neira Ayuso
This patch implements a new function to translate from native TC action to the new flow_action representation. Moreover, this patch also updates cls_flower to use this new function. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06flow_offload: add flow action infrastructurePablo Neira Ayuso
This new infrastructure defines the nic actions that you can perform from existing network drivers. This infrastructure allows us to avoid a direct dependency with the native software TC action representation. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06net/mlx5e: support for two independent packet edit actionsPablo Neira Ayuso
This patch adds pedit_headers_action structure to store the result of parsing tc pedit actions. Then, it calls alloc_tc_pedit_action() to populate the mlx5e hardware intermediate representation once all actions have been parsed. This patch comes in preparation for the new flow_action infrastructure, where each packet mangling comes in an separated action, ie. not packed as in tc pedit. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06flow_offload: add flow_rule and flow_match structures and use themPablo Neira Ayuso
This patch wraps the dissector key and mask - that flower uses to represent the matching side - around the flow_match structure. To avoid a follow up patch that would edit the same LoCs in the drivers, this patch also wraps this new flow match structure around the flow rule object. This new structure will also contain the flow actions in follow up patches. This introduces two new interfaces: bool flow_rule_match_key(rule, dissector_id) that returns true if a given matching key is set on, and: flow_rule_match_XYZ(rule, &match); To fetch the matching side XYZ into the match container structure, to retrieve the key and the mask with one single call. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06Merge branch 'net-phy-add-and-use-further-MMD-accessors'David S. Miller
Heiner Kallweit says: ==================== net: phy: add and use further MMD accessors Add MMD accessors for modifying MMD registers and clearing / setting bits in MMD registers. Use these accessors in PHY drivers and phylib. v2: - fix SoB in patch 2 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06net: phy: make use of new MMD accessorsHeiner Kallweit
Make use of the new MMD accessors. v2: - fix SoB Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06net: phy: provide full set of accessor functions to MMD registersNikita Yushchenko
This adds full set of locked and unlocked accessor functions to read and write PHY MMD registers and/or bitfields. Set of functions exactly matches what is already available for PHY legacy registers. Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06Merge tag 'wireless-drivers-next-for-davem-2019-02-06' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.1 First set of patches for 5.1. Lots of new features in various drivers but nothing really special standing out. Major changes: brcmfmac * DMI nvram filename quirk for PoV TAB-P1006W-232 tablet rsi * support for hardware scan offload iwlwifi * support for Target Wakeup Time (TWT) -- a feature that allows the AP to specify when individual stations can access the medium * support for mac80211 AMSDU handling * some new PCI IDs * relicense the pcie submodule to dual GPL/BSD * reworked the TOF/CSI (channel estimation matrix) implementation * Some product name updates in the human-readable strings mt76 * energy detect regulatory compliance fixes * preparation for MT7603 support * channel switch announcement support mwifiex * support for sd8977 chipset qtnfmac * support for 4addr mode * convert to SPDX license identifiers ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06bpf: test_maps: fix possible out of bound access warningBreno Leitao
When compiling test_maps selftest with GCC-8, it warns that an array might be indexed with a negative value, which could cause a negative out of bound access, depending on parameters of the function. This is the GCC-8 warning: gcc -Wall -O2 -I../../../include/uapi -I../../../lib -I../../../lib/bpf -I../../../../include/generated -DHAVE_GENHDR -I../../../include test_maps.c /home/breno/Devel/linux/tools/testing/selftests/bpf/libbpf.a -lcap -lelf -lrt -lpthread -o /home/breno/Devel/linux/tools/testing/selftests/bpf/test_maps In file included from test_maps.c:16: test_maps.c: In function ‘run_all_tests’: test_maps.c:1079:10: warning: array subscript -1 is below array bounds of ‘pid_t[<Ube20> + 1]’ [-Warray-bounds] assert(waitpid(pid[i], &status, 0) == pid[i]); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ test_maps.c:1059:6: warning: array subscript -1 is below array bounds of ‘pid_t[<Ube20> + 1]’ [-Warray-bounds] pid[i] = fork(); ~~~^~~ This patch simply guarantees that the task(s) variables are unsigned, thus, they could never be a negative number (which they are not in current code anyway), hence avoiding an out of bound access warning. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-06tools: bpftool: doc, fix incorrect textPrashant Bhole
Documentation about cgroup, feature, prog uses wrong header 'MAP COMMANDS' while listing commands. This patch corrects the header in respective doc files. Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Yonghong Song <yhs@fb.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-06Merge branch 'bpf-xdp-hw-plus-generic'Daniel Borkmann
Jakub Kicinski says: ==================== Offloaded and native/driver XDP programs can already coexist. Allow offload and generic hook to coexist as well, there seem to be no reason why not to do so. ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-06selftests/bpf: test reading the offloaded programJakub Kicinski
Test adding the offloaded program after the other program is already installed. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-06selftests/bpf: add test for mixing generic and offload XDPJakub Kicinski
Add simple sanity check for enabling generic and offload XDP, simply reuse the native and offload checks. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-06selftests/bpf: print traceback when test failsJakub Kicinski
Figuring out which exact check in test_offload.py takes more time than it should. Print the traceback (to the screen and the logs). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-06net: xdp: allow generic and driver XDP on one interfaceJakub Kicinski
Since commit a25717d2b604 ("xdp: support simultaneous driver and hw XDP attachment") users can load an XDP program for offload and in native driver mode simultaneously. Allow a similar mix of offload and SKB mode/generic XDP. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-06selftests/bpf: fix the expected messagesJakub Kicinski
Recent changes added extack to program replacement path, expect extack instead of generic messages. Fixes: 01dde20ce04b ("xdp: Provide extack messages when prog attachment failed") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-05tools/bpf: silence a libbpf unnecessary warningYonghong Song
Commit 96408c43447a ("tools/bpf: implement libbpf btf__get_map_kv_tids() API function") refactored function bpf_map_find_btf_info() and moved bulk of implementation into btf.c as btf__get_map_kv_tids(). This change introduced a bug such that test_btf will print out the following warning although the test passed: BTF libbpf test[2] (test_btf_nokv.o): libbpf: map:btf_map container_name:____btf_map_btf_map cannot be found in BTF. Missing BPF_ANNOTATE_KV_PAIR? Previously, the error message is guarded with pr_debug(). Commit 96408c43447a changed it to pr_warning() and hence caused the warning. Restoring to pr_debug() for the message fixed the issue. Fixes: 96408c43447a ("tools/bpf: implement libbpf btf__get_map_kv_tids() API function") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-02-05Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2019-02-05 This series contains updates to igc, e1000e, ixgbe, fm10k and driver documentation. Kai-Heng Feng fixes an e1000e issue where the Wake-On-LAN settings where being set incorrectly during a system suspend. Sasha addresses community feedback on the igc driver and provides a number of code cleanups to remove either unreachable or unused code. In addition, added basic ethtool support for the igc driver. Mike Rapoport fixes the formatting of the kernel driver documentation so that the title is properly formatted and does not get lumped with the document sections in the HTML kernel documents generated. Jiri Kosina updates a hard coded RAR entries value with the existing define IXGBE_82599_RAR_ENTRIES. Jake fixes up whitespace in the fm10k driver. Konstantin Khlebnikov fixes an issue where in some cases, the e1000e driver will continually reset during a system boot because the watchdog task sees items in the transmit buffer but the carrier is off (trying to establish link) causing the device reset to flush the buffer. To resolve, just move this check/flush into the watchdog section for when the carrier is off. Todd bumps the igb driver version to reflect the recent driver changes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-05tools/bpf: add const qualifier to btf__get_map_kv_tids() map_name parameterYonghong Song
Commit 96408c43447a ("tools/bpf: implement libbpf btf__get_map_kv_tids() API function") added the API function btf__get_map_kv_tids(): btf__get_map_kv_tids(const struct btf *btf, char *map_name, ...) The parameter map_name has type "char *". This is okay inside libbpf library since the map_name is from bpf_map->name which also has type "char *". This will be problematic if the caller for map_name already has attribute "const", e.g., from C++ string.c_str(). It will result in either a warning or an error. /home/yhs/work/bcc/src/cc/btf.cc:166:51: error: invalid conversion from ‘const char*’ to ‘char*’ [-fpermissive] return btf__get_map_kv_tids(btf_, map_name.c_str() This patch added "const" attributes to map_name parameter. Fixes: 96408c43447a ("tools/bpf: implement libbpf btf__get_map_kv_tids() API function") Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-02-05tools/bpf: fix a selftest test_btf failureYonghong Song
Commit 9c651127445c ("selftests/btf: add initial BTF dedup tests") added dedup tests in test_btf.c. It broke the raw test: BTF raw test[71] (func proto (Bad arg name_off)): btf_raw_create:2905:FAIL Error getting string #65535, strs_cnt:1 The test itself encodes invalid func_proto parameter name offset 0xffffFFFF as a negative test for the kernel. The above commit changed the meaning of that offset and resulted in a user space error. #define NAME_NTH(N) (0xffff0000 | N) #define IS_NAME_NTH(X) ((X & 0xffff0000) == 0xffff0000) #define GET_NAME_NTH_IDX(X) (X & 0x0000ffff) Currently, the kernel permits maximum name offset 0xffff. Set the test name off as 0x0fffFFFF to trigger the kernel verification failure. Cc: Andrii Nakryiko <andriin@fb.com> Fixes: 9c651127445c ("selftests/btf: add initial BTF dedup tests") Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-02-05igc: Add ethtool supportSasha Neftin
This patch adds basic ethtool support to the device to allow for configuration. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-05igb: Bump version numberTodd Fujinaka
With recent changes, need to bump the driver version to reflect the changes. Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-05igc: Remove the 'igc_get_phy_id_base' methodSasha Neftin
Remove the redundant 'igc_get_phy_id_base' method and use the 'igc_get_phy_id' method directly instead. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-05igc: Remove the 'igc_read_mac_addr_base' methodSasha Neftin
Remove the redundant 'igc_read_mac_addr_base' method and use the 'igc_read_mac_addr' method directly instead. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-05e1000e: fix cyclic resets at link up with active txKonstantin Khlebnikov
I'm seeing series of e1000e resets (sometimes endless) at system boot if something generates tx traffic at this time. In my case this is netconsole who sends message "e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames" from e1000e itself. As result e1000_watchdog_task sees used tx buffer while carrier is off and start this reset cycle again. [ 17.794359] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.794714] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 22.936455] e1000e 0000:02:00.0 eth1: changing MTU from 1500 to 9000 [ 23.033336] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 26.102364] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 27.174495] 8021q: 802.1Q VLAN Support v1.8 [ 27.174513] 8021q: adding VLAN 0 to HW filter on device eth1 [ 30.671724] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation [ 30.898564] netpoll: netconsole: local port 6666 [ 30.898566] netpoll: netconsole: local IPv6 address 2a02:6b8:0:80b:beae:c5ff:fe28:23f8 [ 30.898567] netpoll: netconsole: interface 'eth1' [ 30.898568] netpoll: netconsole: remote port 6666 [ 30.898568] netpoll: netconsole: remote IPv6 address 2a02:6b8:b000:605c:e61d:2dff:fe03:3790 [ 30.898569] netpoll: netconsole: remote ethernet address b0:a8:6e:f4:ff:c0 [ 30.917747] console [netcon0] enabled [ 30.917749] netconsole: network logging started [ 31.453353] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.185730] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.321840] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.465822] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.597423] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.745417] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.877356] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 35.005441] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 35.157376] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 35.289362] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 35.417441] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 37.790342] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None This patch flushes tx buffers only once when carrier is off rather than at each watchdog iteration. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-05igc: Remove unneeded codeSasha Neftin
Remove the 'igc_get_link_up_info_base method' from igc_base.c file. Use the 'igc_get_speed_and_duplex_copper' method directly and reduce the code redundancy. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-05igc: Remove unused codeSasha Neftin
Remove unused igc_adv_data_desc definition from igc_base.h file. Descriptors definition will be added per demand. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-05e1000e: fix a missing check for return valueJeff Kirsher
The change is based on the issue found by Kangjie Lu <kjlu@umn.edu> where we not checking the return value of a register read/write which could result in a NULL pointer dereference if the read/write fails. Since we are only trying to disable the far-end loopback, if the read and write of register fails, we do not want to bail out of the function. We just want to log that it failed to disable and continue on. CC: Sasha Neftin <sasha.neftin@intel.com> CC: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-05fm10k: TRIVIAL cleanup of extra spacing in function commentJacob Keller
The function comment for fm10k_iov_msg_msix_pf has an extra space in a sentence, which is unnecessary. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-05ixgbe: remove magic constant in ixgbe_reset_hw_82599()Jiri Kosina
ixgbe_reset_hw_82599() resets the value of hw->mac.num_rar_entries to pre-defined value of 128. Let's get rid of that hardcoded literal, and use IXGBE_82599_RAR_ENTRIES instead, the same way the normal initialization path does. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-05igc: Fix code redundancySasha Neftin
Remove redundant igc_check_for_link_base code and replace it with an igc_check_for_copper_link method. Fix duplication of IGC_ADVTXD_PAYLEN_SHIFT mask declaration. Remove obsolete IGC_SCVPC register definition. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-05docs/networking: fix formatting of Intel drivers documentationMike Rapoport
The documentation of Intel drivers is missing the heading adornment for document titles. This causes the generated html to have TOC entries from these documents to appear as top level TOC entries: * Linux* Base Driver for Intel(R) Ethernet Network Connection * Contents * Identifying Your Adapter * Command Line Parameters * AutoNeg * Duplex ... Add overline heading adornment to document titles. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-05igc: Remove unreachable code from igc_phy.c fileSasha Neftin
Address community comment. Remove the unreachable code leads to the static checker warning. PHY functionality will be added later per demand. Reported by Dan Carpenter. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-05e1000e: Exclude device from suspend direct complete optimizationKai-Heng Feng
e1000e sets different WoL settings in system suspend callback and runtime suspend callback. The suspend direct complete optimization leaves e1000e in runtime suspended state with wrong WoL setting during system suspend. To fix this, we need to disable suspend direct complete optimization to let e1000e always use suspend callback to set correct WoL during system suspend. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-05net: marvell: mvpp2: fix lack of link interruptsRussell King
Sven Auhagen reports that if he changes a SFP+ module for a SFP module on the Macchiatobin Single Shot, the link does not come back up. For Sven, it is as easy as: - Insert a SFP+ module connected, and use ping6 to verify link is up. - Remove SFP+ module - Insert SFP 1000base-X module use ping6 to verify link is up: Link up event did not trigger and the link is down but that doesn't show the problem for me. Locally, this has been reproduced by: - Boot with no modules. - Insert SFP+ module, confirm link is up. - Replace module with 25000base-X module. Confirm link is up. - Set remote end down, link is reported as dropped at both ends. - Set remote end up, link is reported up at remote end, but not local end due to lack of link interrupt. Fix this by setting up both GMAC and XLG interrupts for port 0, but only unmasking the appropriate interrupt according to the current mode set in the mac_config() method. However, only do the mask/unmask dance when we are really changing the link mode to avoid missing any link interrupts. Tested-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-05net: marvell: mvpp2: use phy_interface_mode_is_8023z() helperRussell King
Use the phy_interface_mode_is_8023z() helper for detecting interface modes that use 802.3z serial encoding. This is equivalent to testing for both 1000base-X and 2500base-X. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-05Merge branch 'nixge-Fixed-link-support'David S. Miller
Moritz Fischer says: ==================== nixge: Fixed-link support This series adds fixed-link support to nixge. The first patch corrects the binding to correctly reflect hardware that does not come with MDIO cores instantiated. The second patch adds fixed link support to the driver. The third patch updates the binding document with the now optional (formerly required) phy-handle property and references the fixed-link docs. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-05dt-bindings: net: Add fixed-link supportMoritz Fischer
Update device-tree binding with fixed-link support. With fixed-link support the formerly required property 'phy-handle' is now optional if 'fixed-link' child is present. Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-05net: nixge: Add support for fixed-link configurationsMoritz Fischer
Add support for fixed-link configurations to nixge driver. Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-05net: nixge: Make mdio child node optionalMoritz Fischer
Make MDIO child optional and only instantiate the MDIO bus if the child is actually present. There are currently no (in-tree) users of this binding; all (out-of-tree) users use overlays that get shipped together with the FPGA images that contain the IP. This will significantly increase maintainabilty of future revisions of this IP. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-05Merge branch 'bpf-riscv-jit'Daniel Borkmann
Björn Töpel says: ==================== This v2 series adds an RV64G BPF JIT to the kernel. At the moment the RISC-V Linux port does not support CONFIG_HAVE_KPROBES (Patrick Stählin sent out an RFC last year), which means that CONFIG_BPF_EVENTS is not supported. Thus, no tests involving BPF_PROG_TYPE_TRACEPOINT, BPF_PROG_TYPE_PERF_EVENT, BPF_PROG_TYPE_KPROBE and BPF_PROG_TYPE_RAW_TRACEPOINT passes. The implementation does not support "far branching" (>4KiB). Test results: # modprobe test_bpf test_bpf: Summary: 378 PASSED, 0 FAILED, [366/366 JIT'ed] # echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled # ./test_verifier ... Summary: 761 PASSED, 507 SKIPPED, 2 FAILED Note that "test_verifier" was run with one build with CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y and one without, otherwise many of the the tests that require unaligned access were skipped. CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y: # echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled # ./test_verifier | grep -c 'NOTE.*unknown align' 0 No CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS: # echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled # ./test_verifier | grep -c 'NOTE.*unknown align' 59 The two failing test_verifier tests are: "ld_abs: vlan + abs, test 1" "ld_abs: jump around ld_abs" This is due to that "far branching" involved in those tests. All tests where done on QEMU emulator version 3.1.50 (v3.1.0-688-g8ae951fbc106). I'll test it on real hardware, when I get access to it. I'm routing this patch via bpf-next/netdev mailing list (after a conversation with Palmer at FOSDEM), mainly because the other JITs went that path. Again, thanks for all the comments! Cheers, Björn v1 -> v2: * Added JMP32 support. (Daniel) * Add RISC-V to Documentation/sysctl/net.txt. (Daniel) * Fixed seen_call() asymmetry. (Daniel) * Fixed broken bpf_flush_icache() range. (Daniel) * Added alignment annotations to some selftests. RFCv1 -> v1: * Cleaned up the Kconfig and net/Makefile. (Christoph) * Removed the entry-stub and squashed the build/config changes to be part of the JIT implementation. (Christoph) * Simplified the register tracking code. (Daniel) * Removed unused macros. (Daniel) * Added myself as maintainer and updated documentation. (Daniel) * Removed HAVE_EFFICIENT_UNALIGNED_ACCESS. (Christoph, Palmer) * Added tail-calls and cleaned up the code. ==================== Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-05selftests/bpf: add "any alignment" annotation for some testsBjörn Töpel
RISC-V does, in-general, not have "efficient unaligned access". When testing the RISC-V BPF JIT, some selftests failed in the verification due to misaligned access. Annotate these tests with the F_NEEDS_EFFICIENT_UNALIGNED_ACCESS flag. Signed-off-by: Björn Töpel <bjorn.topel@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-05bpf, doc: add RISC-V JIT to BPF documentationBjörn Töpel
Update Documentation/networking/filter.txt and Documentation/sysctl/net.txt to mention RISC-V. Signed-off-by: Björn Töpel <bjorn.topel@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-05MAINTAINERS: add RISC-V BPF JIT maintainerBjörn Töpel
Add Björn Töpel as RISC-V BPF JIT maintainer. Signed-off-by: Björn Töpel <bjorn.topel@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-05bpf, riscv: add BPF JIT for RV64GBjörn Töpel
This commit adds a BPF JIT for RV64G. The JIT is a two-pass JIT, and has a dynamic prolog/epilogue (similar to the MIPS64 BPF JIT) instead of static ones (e.g. x86_64). At the moment the RISC-V Linux port does not support CONFIG_HAVE_KPROBES, which means that CONFIG_BPF_EVENTS is not supported. Thus, no tests involving BPF_PROG_TYPE_TRACEPOINT, BPF_PROG_TYPE_PERF_EVENT, BPF_PROG_TYPE_KPROBE and BPF_PROG_TYPE_RAW_TRACEPOINT passes. The implementation does not support "far branching" (>4KiB). Test results: # modprobe test_bpf test_bpf: Summary: 378 PASSED, 0 FAILED, [366/366 JIT'ed] # echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled # ./test_verifier ... Summary: 761 PASSED, 507 SKIPPED, 2 FAILED Note that "test_verifier" was run with one build with CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y and one without, otherwise many of the the tests that require unaligned access were skipped. CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y: # echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled # ./test_verifier | grep -c 'NOTE.*unknown align' 0 No CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS: # echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled # ./test_verifier | grep -c 'NOTE.*unknown align' 59 The two failing test_verifier tests are: "ld_abs: vlan + abs, test 1" "ld_abs: jump around ld_abs" This is due to that "far branching" involved in those tests. All tests where done on QEMU (QEMU emulator version 3.1.50 (v3.1.0-688-g8ae951fbc106)). Signed-off-by: Björn Töpel <bjorn.topel@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
generated by cgit (git 2.34.1) at 2025-07-16 09:51:48 +0000