summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-12-23tools: bpftool: maps: close json array on error paths of showJakub Kicinski
We can't return from the middle of do_show(), because json_array will not be closed. Break out of the loop. Note that the error handling after the loop depends on errno, so no need to set err. Fixes: 831a0aafe5c3 ("tools: bpftool: add JSON output for `bpftool map *` commands") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-22selftests/bpf: fix Makefile for passing LLC to the command lineQuentin Monnet
Makefile has a LLC variable that is initialised to "llc", but can theoretically be overridden from the command line ("make LLC=llc-6.0"). However, this fails because for LLVM probe check, "llc" is called directly. Use the $(LLC) variable instead to fix this. Fixes: 22c8852624fc ("bpf: improve selftests and add tests for meta pointer") Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-21Merge branch 'net-zerocopy-fixes'David S. Miller
Saeed Mahameed says: =================== Mellanox, mlx5 fixes 2017-12-19 The follwoing series includes some fixes for mlx5 core and etherent driver. Please pull and let me know if there is any problem. This series doesn't introduce any conflict with the ongoing mlx5 for-next submission. For -stable: kernels >= v4.7.y ("net/mlx5e: Fix possible deadlock of VXLAN lock") ("net/mlx5e: Add refcount to VXLAN structure") ("net/mlx5e: Prevent possible races in VXLAN control flow") ("net/mlx5e: Fix features check of IPv6 traffic") kernels >= v4.9.y ("net/mlx5: Fix error flow in CREATE_QP command") ("net/mlx5: Fix rate limit packet pacing naming and struct") kernels >= v4.13.y ("net/mlx5: FPGA, return -EINVAL if size is zero") kernels >= v4.14.y ("Revert "mlx5: move affinity hints assignments to generic code") All above patches apply and compile with no issues on corresponding -stable. =================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21skbuff: skb_copy_ubufs must release uarg even without user fragsWillem de Bruijn
skb_copy_ubufs creates a private copy of frags[] to release its hold on user frags, then calls uarg->callback to notify the owner. Call uarg->callback even when no frags exist. This edge case can happen when zerocopy_sg_from_iter finds enough room in skb_headlen to copy all the data. Fixes: 3ece782693c4 ("sock: skb_copy_ubufs support for compound pages") Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21skbuff: orphan frags before zerocopy cloneWillem de Bruijn
Call skb_zerocopy_clone after skb_orphan_frags, to avoid duplicate calls to skb_uarg(skb)->callback for the same data. skb_zerocopy_clone associates skb_shinfo(skb)->uarg from frag_skb with each segment. This is only safe for uargs that do refcounting, which is those that pass skb_orphan_frags without dropping their shared frags. For others, skb_orphan_frags drops the user frags and sets the uarg to NULL, after which sock_zerocopy_clone has no effect. Qemu hangs were reported due to duplicate vhost_net_zerocopy_callback calls for the same data causing the vhost_net_ubuf_ref_>refcount to drop below zero. Link: http://lkml.kernel.org/r/<CAF=yD-LWyCD4Y0aJ9O0e_CHLR+3JOeKicRRTEVCPxgw4XOcqGQ@mail.gmail.com> Fixes: 1f8b977ab32d ("sock: enable MSG_ZEROCOPY") Reported-by: Andreas Hartmann <andihartmann@01019freenet.de> Reported-by: David Hill <dhill@redhat.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21net: reevalulate autoflowlabel setting after sysctl settingShaohua Li
sysctl.ip6.auto_flowlabels is default 1. In our hosts, we set it to 2. If sockopt doesn't set autoflowlabel, outcome packets from the hosts are supposed to not include flowlabel. This is true for normal packet, but not for reset packet. The reason is ipv6_pinfo.autoflowlabel is set in sock creation. Later if we change sysctl.ip6.auto_flowlabels, the ipv6_pinfo.autoflowlabel isn't changed, so the sock will keep the old behavior in terms of auto flowlabel. Reset packet is suffering from this problem, because reset packet is sent from a special control socket, which is created at boot time. Since sysctl.ipv6.auto_flowlabels is 1 by default, the control socket will always have its ipv6_pinfo.autoflowlabel set, even after user set sysctl.ipv6.auto_flowlabels to 1, so reset packset will always have flowlabel. Normal sock created before sysctl setting suffers from the same issue. We can't even turn off autoflowlabel unless we kill all socks in the hosts. To fix this, if IPV6_AUTOFLOWLABEL sockopt is used, we use the autoflowlabel setting from user, otherwise we always call ip6_default_np_autolabel() which has the new settings of sysctl. Note, this changes behavior a little bit. Before commit 42240901f7c4 (ipv6: Implement different admin modes for automatic flow labels), the autoflowlabel behavior of a sock isn't sticky, eg, if sysctl changes, existing connection will change autoflowlabel behavior. After that commit, autoflowlabel behavior is sticky in the whole life of the sock. With this patch, the behavior isn't sticky again. Cc: Martin KaFai Lau <kafai@fb.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Tom Herbert <tom@quantonium.net> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21openvswitch: Fix pop_vlan action for double tagged framesEric Garver
skb_vlan_pop() expects skb->protocol to be a valid TPID for double tagged frames. So set skb->protocol to the TPID and let skb_vlan_pop() shift the true ethertype into position for us. Fixes: 5108bbaddc37 ("openvswitch: add processing of L3 packets") Signed-off-by: Eric Garver <e@erig.me> Reviewed-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21ipv6: Honor specified parameters in fibmatch lookupIdo Schimmel
Currently, parameters such as oif and source address are not taken into account during fibmatch lookup. Example (IPv4 for reference) before patch: $ ip -4 route show 192.0.2.0/24 dev dummy0 proto kernel scope link src 192.0.2.1 198.51.100.0/24 dev dummy1 proto kernel scope link src 198.51.100.1 $ ip -6 route show 2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium 2001:db8:2::/64 dev dummy1 proto kernel metric 256 pref medium fe80::/64 dev dummy0 proto kernel metric 256 pref medium fe80::/64 dev dummy1 proto kernel metric 256 pref medium $ ip -4 route get fibmatch 192.0.2.2 oif dummy0 192.0.2.0/24 dev dummy0 proto kernel scope link src 192.0.2.1 $ ip -4 route get fibmatch 192.0.2.2 oif dummy1 RTNETLINK answers: No route to host $ ip -6 route get fibmatch 2001:db8:1::2 oif dummy0 2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium $ ip -6 route get fibmatch 2001:db8:1::2 oif dummy1 2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium After: $ ip -6 route get fibmatch 2001:db8:1::2 oif dummy0 2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium $ ip -6 route get fibmatch 2001:db8:1::2 oif dummy1 RTNETLINK answers: Network is unreachable The problem stems from the fact that the necessary route lookup flags are not set based on these parameters. Instead of duplicating the same logic for fibmatch, we can simply resolve the original route from its copy and dump it instead. Fixes: 18c3a61c4264 ("net: ipv6: RTM_GETROUTE: return matched fib result when requested") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2017-12-21 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix multiple security issues in the BPF verifier mostly related to the value and min/max bounds tracking rework in 4.14. Issues range from incorrect bounds calculation in some BPF_RSH cases, to improper sign extension and reg size handling on 32 bit ALU ops, missing strict alignment checks on stack pointers, and several others that got fixed, from Jann, Alexei and Edward. 2) Fix various build failures in BPF selftests on sparc64. More specifically, librt needed to be added to the libs to link against and few format string fixups for sizeof, from David. 3) Fix one last remaining issue from BPF selftest build that was still occuring on s390x from the asm/bpf_perf_event.h include which could not find the asm/ptrace.h copy, from Hendrik. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21bpf: do not allow root to mangle valid pointersAlexei Starovoitov
Do not allow root to convert valid pointers into unknown scalars. In particular disallow: ptr &= reg ptr <<= reg ptr += ptr and explicitly allow: ptr -= ptr since pkt_end - pkt == length 1. This minimizes amount of address leaks root can do. In the future may need to further tighten the leaks with kptr_restrict. 2. If program has such pointer math it's likely a user mistake and when verifier complains about it right away instead of many instructions later on invalid memory access it's easier for users to fix their progs. 3. when register holding a pointer cannot change to scalar it allows JITs to optimize better. Like 32-bit archs could use single register for pointers instead of a pair required to hold 64-bit scalars. 4. reduces architecture dependent behavior. Since code: r1 = r10; r1 &= 0xff; if (r1 ...) will behave differently arm64 vs x64 and offloaded vs native. A significant chunk of ptr mangling was allowed by commit f1174f77b50c ("bpf/verifier: rework value tracking") yet some of it was allowed even earlier. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-21Merge branch 'bpf-verifier-sec-fixes'Daniel Borkmann
Alexei Starovoitov says: ==================== This patch set addresses a set of security vulnerabilities in bpf verifier logic discovered by Jann Horn. All of the patches are candidates for 4.14 stable. ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-21selftests/bpf: add tests for recent bugfixesJann Horn
These tests should cover the following cases: - MOV with both zero-extended and sign-extended immediates - implicit truncation of register contents via ALU32/MOV32 - implicit 32-bit truncation of ALU32 output - oversized register source operand for ALU32 shift - right-shift of a number that could be positive or negative - map access where adding the operation size to the offset causes signed 32-bit overflow - direct stack access at a ~4GiB offset Also remove the F_LOAD_WITH_STRICT_ALIGNMENT flag from a bunch of tests that should fail independent of what flags userspace passes. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-21bpf: fix integer overflowsAlexei Starovoitov
There were various issues related to the limited size of integers used in the verifier: - `off + size` overflow in __check_map_access() - `off + reg->off` overflow in check_mem_access() - `off + reg->var_off.value` overflow or 32-bit truncation of `reg->var_off.value` in check_mem_access() - 32-bit truncation in check_stack_boundary() Make sure that any integer math cannot overflow by not allowing pointer math with large values. Also reduce the scope of "scalar op scalar" tracking. Fixes: f1174f77b50c ("bpf/verifier: rework value tracking") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-21bpf: don't prune branches when a scalar is replaced with a pointerJann Horn
This could be made safe by passing through a reference to env and checking for env->allow_ptr_leaks, but it would only work one way and is probably not worth the hassle - not doing it will not directly lead to program rejection. Fixes: f1174f77b50c ("bpf/verifier: rework value tracking") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-21bpf: force strict alignment checks for stack pointersJann Horn
Force strict alignment checks for stack pointers because the tracking of stack spills relies on it; unaligned stack accesses can lead to corruption of spilled registers, which is exploitable. Fixes: f1174f77b50c ("bpf/verifier: rework value tracking") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-21bpf: fix missing error return in check_stack_boundary()Jann Horn
Prevent indirect stack accesses at non-constant addresses, which would permit reading and corrupting spilled pointers. Fixes: f1174f77b50c ("bpf/verifier: rework value tracking") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-21bpf: fix 32-bit ALU op verificationJann Horn
32-bit ALU ops operate on 32-bit values and have 32-bit outputs. Adjust the verifier accordingly. Fixes: f1174f77b50c ("bpf/verifier: rework value tracking") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-21bpf: fix incorrect tracking of register size truncationJann Horn
Properly handle register truncation to a smaller size. The old code first mirrors the clearing of the high 32 bits in the bitwise tristate representation, which is correct. But then, it computes the new arithmetic bounds as the intersection between the old arithmetic bounds and the bounds resulting from the bitwise tristate representation. Therefore, when coerce_reg_to_32() is called on a number with bounds [0xffff'fff8, 0x1'0000'0007], the verifier computes [0xffff'fff8, 0xffff'ffff] as bounds of the truncated number. This is incorrect: The truncated number could also be in the range [0, 7], and no meaningful arithmetic bounds can be computed in that case apart from the obvious [0, 0xffff'ffff]. Starting with v4.14, this is exploitable by unprivileged users as long as the unprivileged_bpf_disabled sysctl isn't set. Debian assigned CVE-2017-16996 for this issue. v2: - flip the mask during arithmetic bounds calculation (Ben Hutchings) v3: - add CVE number (Ben Hutchings) Fixes: b03c9f9fdc37 ("bpf/verifier: track signed and unsigned min/max values") Signed-off-by: Jann Horn <jannh@google.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-21bpf: fix incorrect sign extension in check_alu_op()Jann Horn
Distinguish between BPF_ALU64|BPF_MOV|BPF_K (load 32-bit immediate, sign-extended to 64-bit) and BPF_ALU|BPF_MOV|BPF_K (load 32-bit immediate, zero-padded to 64-bit); only perform sign extension in the first case. Starting with v4.14, this is exploitable by unprivileged users as long as the unprivileged_bpf_disabled sysctl isn't set. Debian assigned CVE-2017-16995 for this issue. v3: - add CVE number (Ben Hutchings) Fixes: 484611357c19 ("bpf: allow access into map value arrays") Signed-off-by: Jann Horn <jannh@google.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-21bpf/verifier: fix bounds calculation on BPF_RSHEdward Cree
Incorrect signed bounds were being computed. If the old upper signed bound was positive and the old lower signed bound was negative, this could cause the new upper signed bound to be too low, leading to security issues. Fixes: b03c9f9fdc37 ("bpf/verifier: track signed and unsigned min/max values") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Acked-by: Alexei Starovoitov <ast@kernel.org> [jannh@google.com: changed description to reflect bug impact] Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-20ipv4: Fix use-after-free when flushing FIB tablesIdo Schimmel
Since commit 0ddcf43d5d4a ("ipv4: FIB Local/MAIN table collapse") the local table uses the same trie allocated for the main table when custom rules are not in use. When a net namespace is dismantled, the main table is flushed and freed (via an RCU callback) before the local table. In case the callback is invoked before the local table is iterated, a use-after-free can occur. Fix this by iterating over the FIB tables in reverse order, so that the main table is always freed after the local table. v3: Reworded comment according to Alex's suggestion. v2: Add a comment to make the fix more explicit per Dave's and Alex's feedback. Fixes: 0ddcf43d5d4a ("ipv4: FIB Local/MAIN table collapse") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20s390/qeth: fix error handling in checksum cmd callbackJulian Wiedmann
Make sure to check both return code fields before processing the response. Otherwise we risk operating on invalid data. Fixes: c9475369bd2b ("s390/qeth: rework RX/TX checksum offload") Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20tipc: remove joining group member from congested listJon Maloy
When we receive a JOIN message from a peer member, the message may contain an advertised window value ADV_IDLE that permits removing the member in question from the tipc_group::congested list. However, since the removal has been made conditional on that the advertised window is *not* ADV_IDLE, we miss this case. This has the effect that a sender sometimes may enter a state of permanent, false, broadcast congestion. We fix this by unconditinally removing the member from the congested list before calling tipc_member_update(), which might potentially sort it into the list again. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20selftests: net: Adding config fragment CONFIG_NUMA=yNaresh Kamboju
kernel config fragement CONFIG_NUMA=y is need for reuseport_bpf_numa. Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20Merge tag 'mlx5-fixes-2017-12-19' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: =================== Mellanox, mlx5 fixes 2017-12-19 The follwoing series includes some fixes for mlx5 core and etherent driver. Please pull and let me know if there is any problem. This series doesn't introduce any conflict with the ongoing mlx5 for-next submission. For -stable: kernels >= v4.7.y ("net/mlx5e: Fix possible deadlock of VXLAN lock") ("net/mlx5e: Add refcount to VXLAN structure") ("net/mlx5e: Prevent possible races in VXLAN control flow") ("net/mlx5e: Fix features check of IPv6 traffic") kernels >= v4.9.y ("net/mlx5: Fix error flow in CREATE_QP command") ("net/mlx5: Fix rate limit packet pacing naming and struct") kernels >= v4.13.y ("net/mlx5: FPGA, return -EINVAL if size is zero") kernels >= v4.14.y ("Revert "mlx5: move affinity hints assignments to generic code") All above patches apply and compile with no issues on corresponding -stable. =================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20Merge branch 'cls_bpf-fix-offload-state-tracking-with-block-callbacks'David S. Miller
Jakub Kicinski says: =================== cls_bpf: fix offload state tracking with block callbacks After introduction of block callbacks classifiers can no longer track offload state. cls_bpf used to do that in an attempt to move common code from drivers to the core. Remove that functionality and fix drivers. The user-visible bug this is fixing is that trying to offload a second filter would trigger a spurious DESTROY and in turn disable the already installed one. =================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20nfp: bpf: keep track of the offloaded programJakub Kicinski
After TC offloads were converted to callbacks we have no choice but keep track of the offloaded filter in the driver. The check for nn->dp.bpf_offload_xdp was a stop gap solution to make sure failed TC offload won't disable XDP, it's no longer necessary. nfp_net_bpf_offload() will return -EBUSY on TC vs XDP conflicts. Fixes: 3f7889c4c79b ("net: sched: cls_bpf: call block callbacks for offload") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20cls_bpf: fix offload assumptions after callback conversionJakub Kicinski
cls_bpf used to take care of tracking what offload state a filter is in, i.e. it would track if offload request succeeded or not. This information would then be used to issue correct requests to the driver, e.g. requests for statistics only on offloaded filters, removing only filters which were offloaded, using add instead of replace if previous filter was not added etc. This tracking of offload state no longer functions with the new callback infrastructure. There could be multiple entities trying to offload the same filter. Throw out all the tracking and corresponding commands and simply pass to the drivers both old and new bpf program. Drivers will have to deal with offload state tracking by themselves. Fixes: 3f7889c4c79b ("net: sched: cls_bpf: call block callbacks for offload") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20net: Fix double free and memory corruption in get_net_ns_by_id()Eric W. Biederman
(I can trivially verify that that idr_remove in cleanup_net happens after the network namespace count has dropped to zero --EWB) Function get_net_ns_by_id() does not check for net::count after it has found a peer in netns_ids idr. It may dereference a peer, after its count has already been finaly decremented. This leads to double free and memory corruption: put_net(peer) rtnl_lock() atomic_dec_and_test(&peer->count) [count=0] ... __put_net(peer) get_net_ns_by_id(net, id) spin_lock(&cleanup_list_lock) list_add(&net->cleanup_list, &cleanup_list) spin_unlock(&cleanup_list_lock) queue_work() peer = idr_find(&net->netns_ids, id) | get_net(peer) [count=1] | ... | (use after final put) v ... cleanup_net() ... spin_lock(&cleanup_list_lock) ... list_replace_init(&cleanup_list, ..) ... spin_unlock(&cleanup_list_lock) ... ... ... ... put_net(peer) ... atomic_dec_and_test(&peer->count) [count=0] ... spin_lock(&cleanup_list_lock) ... list_add(&net->cleanup_list, &cleanup_list) ... spin_unlock(&cleanup_list_lock) ... queue_work() ... rtnl_unlock() rtnl_lock() ... for_each_net(tmp) { ... id = __peernet2id(tmp, peer) ... spin_lock_irq(&tmp->nsid_lock) ... idr_remove(&tmp->netns_ids, id) ... ... ... net_drop_ns() ... net_free(peer) ... } ... | v cleanup_net() ... (Second free of peer) Also, put_net() on the right cpu may reorder with left's cpu list_replace_init(&cleanup_list, ..), and then cleanup_list will be corrupted. Since cleanup_net() is executed in worker thread, while put_net(peer) can happen everywhere, there should be enough time for concurrent get_net_ns_by_id() to pick the peer up, and the race does not seem to be unlikely. The patch fixes the problem in standard way. (Also, there is possible problem in peernet2id_alloc(), which requires check for net::count under nsid_lock and maybe_get_net(peer), but in current stable kernel it's used under rtnl_lock() and it has to be safe. Openswitch begun to use peernet2id_alloc(), and possibly it should be fixed too. While this is not in stable kernel yet, so I'll send a separate message to netdev@ later). Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Fixes: 0c7aecd4bde4 "netns: add rtnl cmd to add and get peer netns ids" Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20Merge branch 'mvneta-fixes'David S. Miller
Gregory CLEMENT says: ==================== Few mvneta fixes here it is a small series of fixes found on the mvneta driver. They had been already used in the vendor kernel and are now ported to mainline. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20net: mvneta: eliminate wrong call to handle rx descriptor errorYelena Krivosheev
There are few reasons in mvneta_rx_swbm() function when received packet is dropped. mvneta_rx_error() should be called only if error bit [16] is set in rx descriptor. [gregory.clement@free-electrons.com: add fixes tag] Cc: stable@vger.kernel.org Fixes: dc35a10f68d3 ("net: mvneta: bm: add support for hardware buffer management") Signed-off-by: Yelena Krivosheev <yelena@marvell.com> Tested-by: Dmitri Epshtein <dima@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20net: mvneta: use proper rxq_number in loop on rx queuesYelena Krivosheev
When adding the RX queue association with each CPU, a typo was made in the mvneta_cleanup_rxqs() function. This patch fixes it. [gregory.clement@free-electrons.com: add commit log and fixes tag] Cc: stable@vger.kernel.org Fixes: 2dcf75e2793c ("net: mvneta: Associate RX queues with each CPU") Signed-off-by: Yelena Krivosheev <yelena@marvell.com> Tested-by: Dmitri Epshtein <dima@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20net: mvneta: clear interface link status on port disableYelena Krivosheev
When port connect to PHY in polling mode (with poll interval 1 sec), port and phy link status must be synchronize in order don't loss link change event. [gregory.clement@free-electrons.com: add fixes tag] Cc: <stable@vger.kernel.org> Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: Yelena Krivosheev <yelena@marvell.com> Tested-by: Dmitri Epshtein <dima@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20bpf: Fix tools and testing build.David Miller
I'm getting various build failures on sparc64. The key is usually that the userland tools get built 32-bit. 1) clock_gettime() is in librt, so that must be added to the link libraries. 2) "sizeof(x)" must be printed with "%Z" printf prefix. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-19net/mlx5: Stay in polling mode when command EQ destroy failsMoshe Shemesh
During unload, on mlx5_stop_eqs we move command interface from events mode to polling mode, but if command interface EQ destroy fail we move back to events mode. That's wrong since even if we fail to destroy command interface EQ, we do release its irq, so no interrupts will be received. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19net/mlx5: Cleanup IRQs in case of unload failureMoshe Shemesh
When mlx5_stop_eqs fails to destroy any of the eqs it returns with an error. In such failure flow the function will return without releasing all EQs irqs and then pci_free_irq_vectors will fail. Fix by only warn on destroy EQ failure and continue to release other EQs and their irqs. It fixes the following kernel trace: kernel: kernel BUG at drivers/pci/msi.c:352! ... ... kernel: Call Trace: kernel: pci_disable_msix+0xd3/0x100 kernel: pci_free_irq_vectors+0xe/0x20 kernel: mlx5_load_one.isra.17+0x9f5/0xec0 [mlx5_core] Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19net/mlx5: Fix steering memory leakMaor Gottlieb
Flow steering priority and namespace are software only objects that didn't have the proper destructors and were not freed during steering cleanup. Fix it by adding destructor functions for these objects. Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel") Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19net/mlx5e: Prevent possible races in VXLAN control flowGal Pressman
When calling add/remove VXLAN port, a lock must be held in order to prevent race scenarios when more than one add/remove happens at the same time. Fix by holding our state_lock (mutex) as done by all other parts of the driver. Note that the spinlock protecting the radix-tree is still needed in order to synchronize radix-tree access from softirq context. Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19net/mlx5e: Add refcount to VXLAN structureGal Pressman
A refcount mechanism must be implemented in order to prevent unwanted scenarios such as: - Open an IPv4 VXLAN interface - Open an IPv6 VXLAN interface (different socket) - Remove one of the interfaces With current implementation, the UDP port will be removed from our VXLAN database and turn off the offloads for the other interface, which is still active. The reference count mechanism will only allow UDP port removals once all consumers are gone. Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19net/mlx5e: Fix possible deadlock of VXLAN lockGal Pressman
mlx5e_vxlan_lookup_port is called both from mlx5e_add_vxlan_port (user context) and mlx5e_features_check (softirq), but the lock acquired does not disable bottom half and might result in deadlock. Fix it by simply replacing spin_lock() with spin_lock_bh(). While at it, replace all unnecessary spin_lock_irq() to spin_lock_bh(). lockdep's WARNING: inconsistent lock state [ 654.028136] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 654.028229] swapper/5/0 [HC0[0]:SC1[9]:HE1:SE0] takes: [ 654.028321] (&(&vxlan_db->lock)->rlock){+.?.}, at: [<ffffffffa06e7f0e>] mlx5e_vxlan_lookup_port+0x1e/0x50 [mlx5_core] [ 654.028528] {SOFTIRQ-ON-W} state was registered at: [ 654.028607] _raw_spin_lock+0x3c/0x70 [ 654.028689] mlx5e_vxlan_lookup_port+0x1e/0x50 [mlx5_core] [ 654.028794] mlx5e_vxlan_add_port+0x2e/0x120 [mlx5_core] [ 654.028878] process_one_work+0x1e9/0x640 [ 654.028942] worker_thread+0x4a/0x3f0 [ 654.029002] kthread+0x141/0x180 [ 654.029056] ret_from_fork+0x24/0x30 [ 654.029114] irq event stamp: 579088 [ 654.029174] hardirqs last enabled at (579088): [<ffffffff818f475a>] ip6_finish_output2+0x49a/0x8c0 [ 654.029309] hardirqs last disabled at (579087): [<ffffffff818f470e>] ip6_finish_output2+0x44e/0x8c0 [ 654.029446] softirqs last enabled at (579030): [<ffffffff810b3b3d>] irq_enter+0x6d/0x80 [ 654.029567] softirqs last disabled at (579031): [<ffffffff810b3c05>] irq_exit+0xb5/0xc0 [ 654.029684] other info that might help us debug this: [ 654.029781] Possible unsafe locking scenario: [ 654.029868] CPU0 [ 654.029908] ---- [ 654.029947] lock(&(&vxlan_db->lock)->rlock); [ 654.030045] <Interrupt> [ 654.030090] lock(&(&vxlan_db->lock)->rlock); [ 654.030162] *** DEADLOCK *** Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19net/mlx5: Fix error flow in CREATE_QP commandMoni Shoua
In error flow, when DESTROY_QP command should be executed, the wrong mailbox was set with data, not the one that is written to hardware, Fix that. Fixes: 09a7d9eca1a6 '{net,IB}/mlx5: QP/XRCD commands via mlx5 ifc' Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19net/mlx5: Fix misspelling in the error message and commentEugenia Emantayev
Fix misspelling in word syndrome. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19net/mlx5e: Fix defaulting RX ring size when not neededEugenia Emantayev
Fixes the bug when turning on/off CQE compression mechanism resets the RX rings size to default value when it is not needed. Fixes: 2fc4bfb7250d ("net/mlx5e: Dynamic RQ type infrastructure") Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19net/mlx5e: Fix features check of IPv6 trafficGal Pressman
The assumption that the next header field contains the transport protocol is wrong for IPv6 packets with extension headers. Instead, we should look the inner-most next header field in the buffer. This will fix TSO offload for tunnels over IPv6 with extension headers. Performance testing: 19.25x improvement, cool! Measuring bandwidth of 16 threads TCP traffic over IPv6 GRE tap. CPU: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz NIC: Mellanox Technologies MT28800 Family [ConnectX-5 Ex] TSO: Enabled Before: 4,926.24 Mbps Now : 94,827.91 Mbps Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19net/mlx5e: Fix ETS BW checkHuy Nguyen
Fix bug that allows ets bw sum to be 0% when ets tc type exists. Fixes: 08fb1dacdd76 ('net/mlx5e: Support DCBNL IEEE ETS') Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19net/mlx5: Fix rate limit packet pacing naming and structEran Ben Elisha
In mlx5_ifc, struct size was not complete, and thus driver was sending garbage after the last defined field. Fixed it by adding reserved field to complete the struct size. In addition, rename all set_rate_limit to set_pp_rate_limit to be compliant with the Firmware <-> Driver definition. Fixes: 7486216b3a0b ("{net,IB}/mlx5: mlx5_ifc updates") Fixes: 1466cc5b23d1 ("net/mlx5: Rate limit tables support") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19Revert "mlx5: move affinity hints assignments to generic code"Saeed Mahameed
Before the offending commit, mlx5 core did the IRQ affinity itself, and it seems that the new generic code have some drawbacks and one of them is the lack for user ability to modify irq affinity after the initial affinity values got assigned. The issue is still being discussed and a solution in the new generic code is required, until then we need to revert this patch. This fixes the following issue: echo <new affinity> > /proc/irq/<x>/smp_affinity fails with -EIO This reverts commit a435393acafbf0ecff4deb3e3cb554b34f0d0664. Note: kept mlx5_get_vector_affinity in include/linux/mlx5/driver.h since it is used in mlx5_ib driver. Fixes: a435393acafb ("mlx5: move affinity hints assignments to generic code") Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jes Sorensen <jsorensen@fb.com> Reported-by: Jes Sorensen <jsorensen@fb.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19net/mlx5: FPGA, return -EINVAL if size is zeroKamal Heib
Currently, if a size of zero is passed to mlx5_fpga_mem_{read|write}_i2c() the "err" return value will not be initialized, which triggers gcc warnings: [..]/mlx5/core/fpga/sdk.c:87 mlx5_fpga_mem_read_i2c() error: uninitialized symbol 'err'. [..]/mlx5/core/fpga/sdk.c:115 mlx5_fpga_mem_write_i2c() error: uninitialized symbol 'err'. fix that. Fixes: a9956d35d199 ('net/mlx5: FPGA, Add SBU infrastructure') Signed-off-by: Kamal Heib <kamalh@mellanox.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19ipv4: fib: Fix metrics match when deleting a routePhil Sutter
The recently added fib_metrics_match() causes a regression for routes with both RTAX_FEATURES and RTAX_CC_ALGO if the latter has TCP_CONG_NEEDS_ECN flag set: | # ip link add d0 type dummy | # ip link set d0 up | # ip route add 172.29.29.0/24 dev d0 features ecn congctl dctcp | # ip route del 172.29.29.0/24 dev d0 features ecn congctl dctcp | RTNETLINK answers: No such process During route insertion, fib_convert_metrics() detects that the given CC algo requires ECN and hence sets DST_FEATURE_ECN_CA bit in RTAX_FEATURES. During route deletion though, fib_metrics_match() compares stored RTAX_FEATURES value with that from userspace (which obviously has no knowledge about DST_FEATURE_ECN_CA) and fails. Fixes: 5f9ae3d9e7e4a ("ipv4: do metrics match when looking up and deleting a route") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19net: stmmac: Fix bad RX timestamp extractionFredrik Hallenberg
As noted in dwmac4_wrback_get_rx_timestamp_status the timestamp is found in the context descriptor following the current descriptor. However the current code looks for the context descriptor in the current descriptor, which will always fail. Signed-off-by: Fredrik Hallenberg <megahallon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-15 23:37:50 +0000