| Age | Commit message (Collapse) | Author |
|---|
|
__dev_open() calls the ndo_set_rx_mode callback anyway, so we don't
have to do it here too.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently done:
- if mac_version in (01, 02, 03, 04)
RTL_W8(tp, ChipCmd, CmdTxEnb | CmdRxEnb);
- if mac_version in (01, 02, 03, 04)
rtl_set_rx_tx_config_registers(tp);
- if mac_version not in (01, 02, 03, 04)
RTL_W8(tp, ChipCmd, CmdTxEnb | CmdRxEnb);
rtl_set_rx_tx_config_registers(tp);
So we do exactly the same independent of chip version and can simplify
the code.
In addition remove the call to rtl_init_rxcfg(), it's called in
rtl_init_one() already and the set bits are never touched later.
rtl_init_8168/8101 don't include this call either.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Both quirk masks are the same, so we can merge them. The quirk mask
includes most bits so it's actually easier to define a mask with
the bits to keep.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tp->cp_cmd is supposed to reflect the current value of the CplusCmd
register. Several (quite old) changes however directly change this
register w/o updating tp->cp_cmd. Also we have places in the code
reading this register where we could use the cached value.
In addition:
- Properly initialize tp->cmd with the register value.
- In rtl_hw_start_8169 remove one setting of PCIMulRW because it's
set unconditionally anyway a few lines later.
- In rtl_hw_start_8168 properly mask out the INTT bits before
setting INTT_1. So far we rely on both bits being zero.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use a proper constant for INTT bit mask.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
__rtl8169_set_features is used in rtl8169_set_features only, so we
can inline it. In addition:
- Remove check (features ^ dev->features), __netdev_update_features
check's already that requested features differ from current ones.
- Don't mask out unsupported flags, there's no benefit in it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RxChkSum and RxVlan aren't touched outside __rtl8169_set_features
(except in probe), so they are always in sync with dev->features.
And the RxConfig flags are set in rtl_set_rx_mode() which is
called via dev_set_rx_mode() from __dev_open().
Therefore we can safely remove this call.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
"tx-late-collision"
Trivial fix to spelling mistake in tx_fw_stat_gstrings text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
"mac_tx_multi_collision"
Trivial fix to spelling mistake in oct_stats_strings text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Trivial fix to spelling mistake in DP_INFO message text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Intiyaz Basha says:
====================
liquidio: enhanced ethtool --set-channels feature
For the ethtool --set-channels feature, the liquidio driver currently
accepts max combined value as the queue count configured during driver
load time, where max combined count is the total count of input and output
queues. This limitation is applicable only when SR-IOV is enabled, that
is, when VFs are created for PF. If SR-IOV is not enabled, the driver can
configure max supported (64) queues.
This series of patches are for enhancing driver to accept
max supported queues for ethtool --set-channels.
Changes in V2:
Only patch #6 was changed to fix these Sparse warnings reported by kbuild
test robot:
lio_ethtool.c:848:5: warning: symbol 'lio_23xx_reconfigure_queue_count'
was not declared. Should it be static?
lio_ethtool.c:877:22: warning: incorrect type in assignment (different
base types)
lio_ethtool.c:878:22: warning: incorrect type in assignment (different
base types)
lio_ethtool.c:879:22: warning: incorrect type in assignment (different
base types)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Enhancing driver to accept max supported queues for ethtool --set-channels
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Moved common function setup_glists to lio_core.c
and reamed it to lio_setup_glists
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Moving common definition octnic_gather to octeon_network.h
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Moved common function delete_glists to lio_core.c
and renamed it to lio_delete_glists
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Moved common function list_delete_head to octeon_network.h
and renamed it to lio_list_delete_head
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Moved common function if_cfg_callback to lio_core.c
and renamed it to lio_if_cfg_callback.
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Quentin Monnet says:
====================
Here is a follow-up set for eBPF helper documentation, with two patches
to fix formatting issues:
- One to fix an error I introduced with the initial set for the doc.
- One for the newly added bpf_get_stack(), that is currently not parsed
correctly with the Python script (function signature is fine, but
description and return value appear as empty).
There is no change to text contents in this set.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Bring fixes for eBPF helper documentation formatting to bpf.h under
tools/ as well.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Fix formatting (indent) for bpf_get_stack() helper documentation, so
that the doc is rendered correctly with the Python script.
Fixes: c195651e565a ("bpf: add bpf_get_stack helper")
Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Some edits brought to the last iteration of BPF helper functions
documentation introduced an error with RST formatting. As a result, most
of one paragraph is rendered in bold text when only the name of a helper
should be. Fix it, and fix formatting of another function name in the
same paragraph.
Fixes: c6b5fb8690fa ("bpf: add documentation for eBPF helpers (42-50)")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
tracepoints to bpf core were added as a way to provide introspection
to bpf programs and maps, but after some time it became clear that
this approach is inadequate, so prog_id, map_id and corresponding
get_next_id, get_fd_by_id, get_info_by_fd, prog_query APIs were
introduced and fully adopted by bpftool and other applications.
The tracepoints in bpf core started to rot and causing syzbot warnings:
WARNING: CPU: 0 PID: 3008 at kernel/trace/trace_event_perf.c:274
Kernel panic - not syncing: panic_on_warn set ...
perf_trace_bpf_map_keyval+0x260/0xbd0 include/trace/events/bpf.h:228
trace_bpf_map_update_elem include/trace/events/bpf.h:274 [inline]
map_update_elem kernel/bpf/syscall.c:597 [inline]
SYSC_bpf kernel/bpf/syscall.c:1478 [inline]
Hence this patch deletes tracepoints in bpf core.
Reported-by: Eric Biggers <ebiggers3@gmail.com>
Reported-by: syzbot <bot+a9dbb3c3e64b62536a4bc5ee7bbd4ca627566188@syzkaller.appspotmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Commit d5a00528b58c ("syscalls/core, syscalls/x86: Rename
struct pt_regs-based sys_*() to __x64_sys_*()") renamed a lot
of syscall function sys_*() to __x64_sys_*().
This caused several kprobe based samples/bpf tests failing.
This patch fixed the problem in bpf_load.c.
For x86_64 architecture, function name __x64_sys_*() will be
first used for kprobe event creation. If the creation is successful,
it will be used. Otherwise, function name sys_*() will be used
for kprobe event creation.
Fixes: d5a00528b58c ("syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We have about 53 netdev_features_t bits defined and counting, add a
build time check to catch when an u64 type will not be enough and we
will have to convert that to a bitmap. This is done in
register_netdevice() for convenience.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Trivial fix to spelling mistake in netdev_warn warning message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alexander Duyck says:
====================
Clean up users of skb_tx_hash and __skb_tx_hash
I am in the process of doing some work to try and enable macvlan Tx queue
selection without using ndo_select_queue. As a part of that I will likely
need to make changes to skb_tx_hash. As such this is a clean up or refactor
of the two spots where he function has been used. In both cases it didn't
really seem like the function was being used correctly so I have updated
both code paths to not make use of the function.
My current development environment doesn't have an mlx4 or OPA vnic
available so the changes to those have been build tested only.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I am dropping the export of __skb_tx_hash as after my patches nobody is
using it outside of the net/core/dev.c file. In addition I am renaming and
repurposing it to just be a static declaration of skb_tx_hash since that
was the only user for it at this point. By doing this the compiler can
inline it into __netdev_pick_tx as that will improve performance.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The code in the fallback path has supported XDP in conjunction with the Tx
traffic classification for TCs for over a year now. So instead of just
calling skb_tx_hash for every packet we are better off using the fallback
since that will record the Tx queue to the socket and then that can be used
instead of having to recompute the hash every time.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is meant to clean up how the opa_vnic is obtaining entropy from
Tx packets.
The code as it was written was claiming to get 16 bits of hash, but from
what I can tell it was only ever actually getting 14 bits as it was limited
to 0 - (2^15 - 1). It then was folding the result to get a 8 bit value for
entropy.
Instead of throwing away all that input I am cutting out the middle man and
instead having the code call skb_get_hash directly and then folding the 32
bit value into a 8 bit value using a pair of shifts and XOR operations.
Execution wise this new approach should provide more entropy and be faster
since we are bypassing the reciprocal multiplication to reduce the 32b
value to 16b and instead just using a shift/XOR combination.
In addition we can drop the unneeded adapter value from the call to get the
entropy since the netdev itself isn't even needed.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Raghuram Chary J says:
====================
lan78xx updates along with Fixed phy Support
These series of patches handle few modifications in driver
and adds support for fixed phy.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Modify the error messages when phy registration fails.
Signed-off-by: Raghuram Chary J <raghuramchary.jallipalli@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove driver version info from the lan78xx driver.
Signed-off-by: Raghuram Chary J <raghuramchary.jallipalli@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adding Fixed PHY support to the lan78xx driver.
Signed-off-by: Raghuram Chary J <raghuramchary.jallipalli@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Eric Dumazet says:
====================
tcp: mmap: rework zerocopy receive
syzbot reported a lockdep issue caused by tcp mmap() support.
I implemented Andy Lutomirski nice suggestions to resolve the
issue and increase scalability as well.
First patch is adding a new getsockopt() operation and changes mmap()
behavior.
Second patch changes tcp_mmap reference program.
v4: tcp mmap() support depends on CONFIG_MMU, as kbuild bot told us.
v3: change TCP_ZEROCOPY_RECEIVE to be a getsockopt() option
instead of setsockopt(), feedback from Ka-Cheon Poon
v2: Added a missing page align of zc->length in tcp_zerocopy_receive()
Properly clear zc->recv_skip_hint in case user request was completed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After prior kernel change, mmap() on TCP socket only reserves VMA.
We have to use getsockopt(fd, IPPROTO_TCP, TCP_ZEROCOPY_RECEIVE, ...)
to perform the transfert of pages from skbs in TCP receive queue into such VMA.
struct tcp_zerocopy_receive {
__u64 address; /* in: address of mapping */
__u32 length; /* in/out: number of bytes to map/mapped */
__u32 recv_skip_hint; /* out: amount of bytes to skip */
};
After a successful getsockopt(...TCP_ZEROCOPY_RECEIVE...), @length contains
number of bytes that were mapped, and @recv_skip_hint contains number of bytes
that should be read using conventional read()/recv()/recvmsg() system calls,
to skip a sequence of bytes that can not be mapped, because not properly page
aligned.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When adding tcp mmap() implementation, I forgot that socket lock
had to be taken before current->mm->mmap_sem. syzbot eventually caught
the bug.
Since we can not lock the socket in tcp mmap() handler we have to
split the operation in two phases.
1) mmap() on a tcp socket simply reserves VMA space, and nothing else.
This operation does not involve any TCP locking.
2) getsockopt(fd, IPPROTO_TCP, TCP_ZEROCOPY_RECEIVE, ...) implements
the transfert of pages from skbs to one VMA.
This operation only uses down_read(¤t->mm->mmap_sem) after
holding TCP lock, thus solving the lockdep issue.
This new implementation was suggested by Andy Lutomirski with great details.
Benefits are :
- Better scalability, in case multiple threads reuse VMAS
(without mmap()/munmap() calls) since mmap_sem wont be write locked.
- Better error recovery.
The previous mmap() model had to provide the expected size of the
mapping. If for some reason one part could not be mapped (partial MSS),
the whole operation had to be aborted.
With the tcp_zerocopy_receive struct, kernel can report how
many bytes were successfuly mapped, and how many bytes should
be read to skip the problematic sequence.
- No more memory allocation to hold an array of page pointers.
16 MB mappings needed 32 KB for this array, potentially using vmalloc() :/
- skbs are freed while mmap_sem has been released
Following patch makes the change in tcp_mmap tool to demonstrate
one possible use of mmap() and setsockopt(... TCP_ZEROCOPY_RECEIVE ...)
Note that memcg might require additional changes.
Fixes: 93ab6cc69162 ("tcp: implement mmap() for zero copy receive")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Suggested-by: Andy Lutomirski <luto@kernel.org>
Cc: linux-mm@kvack.org
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we set a bond slave's master to bridge via ioctl, we only check
the IFF_BRIDGE_PORT flag. Although we will find the slave's real master
at netdev_master_upper_dev_link() later, it already does some settings
and allocates some resources. It would be better to return as early
as possible.
v1 -> v2:
use netdev_master_upper_dev_get() instead of netdev_has_any_upper_dev()
to check if we have a master, because not all upper devs are masters,
e.g. vlan device.
Reported-by: syzbot+de73361ee4971b6e6f75@syzkaller.appspotmail.com
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Vivien Didelot says:
====================
net: dsa: mv88e6xxx: remove Global 2 setup
Parts of the mv88e6xxx driver still write arbitrary registers of
different banks at setup time, which is misleading especially when
supporting multiple device models.
This patchset moves two features setup into the top lovel
mv88e6xxx_setup function and kills the old Global 2 register bank setup
function. It brings no functional changes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The remaining values written to the Switch Management Register in the
mv88e6xxx_g2_setup function are specific to 88E6352 and older, and are
the default values anyway.
Thus remove completely this function. The mv88e6xxx driver no more
contains setup code to access arbitrary Global 2 registers.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the Device Mapping setup out of the specific Global 2 code,
into the top level device setup function.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the trunking setup out of Global 2 specific setup into the top
level mv88e6xxx_setup function.
Note that the 88E6390 family calls this LAG instead of Trunk and
supports 32 possible ID routing vectors, with LAG ID bit 4 being placed
in Global 2 register 0x1D...
We don't need Trunk (or LAG) IDs for the moment, thus keep it simple.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"Another set of x86 related updates:
- Fix the long broken x32 version of the IPC user space headers which
was noticed by Arnd Bergman in course of his ongoing y2038 work.
GLIBC seems to have non broken private copies of these headers so
this went unnoticed.
- Two microcode fixlets which address some more fallout from the
recent modifications in that area:
- Unconditionally save the microcode patch, which was only saved
when CPU_HOTPLUG was enabled causing failures in the late
loading mechanism
- Make the later loader synchronization finally work under all
circumstances. It was exiting early and causing timeout failures
due to a missing synchronization point.
- Do not use mwait_play_dead() on AMD systems to prevent excessive
power consumption as the CPU cannot go into deep power states from
there.
- Address an annoying sparse warning due to lost type qualifiers of
the vmemmap and vmalloc base address constants.
- Prevent reserving crash kernel region on Xen PV as this leads to
the wrong perception that crash kernels actually work there which
is not the case. Xen PV has its own crash mechanism handled by the
hypervisor.
- Add missing TLB cpuid values to the table to make the printout on
certain machines correct.
- Enumerate the new CLDEMOTE instruction
- Fix an incorrect SPDX identifier
- Remove stale macros"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ipc: Fix x32 version of shmid64_ds and msqid64_ds
x86/setup: Do not reserve a crash kernel region if booted on Xen PV
x86/cpu/intel: Add missing TLB cpuid values
x86/smpboot: Don't use mwait_play_dead() on AMD systems
x86/mm: Make vmemmap and vmalloc base address constants unsigned long
x86/vector: Remove the unused macro FPU_IRQ
x86/vector: Remove the macro VECTOR_OFFSET_START
x86/cpufeatures: Enumerate cldemote instruction
x86/microcode: Do not exit early from __reload_late()
x86/microcode/intel: Save microcode patch unconditionally
x86/jailhouse: Fix incorrect SPDX identifier
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 pti fixes from Thomas Gleixner:
"A set of updates for the x86/pti related code:
- Preserve r8-r11 in int $0x80. r8-r11 need to be preserved, but the
int$80 entry code removed that quite some time ago. Make it correct
again.
- A set of fixes for the Global Bit work which went into 4.17 and
caused a bunch of interesting regressions:
- Triggering a BUG in the page attribute code due to a missing
check for early boot stage
- Warnings in the page attribute code about holes in the kernel
text mapping which are caused by the freeing of the init code.
Handle such holes gracefully.
- Reduce the amount of kernel memory which is set global to the
actual text and do not incidentally overlap with data.
- Disable the global bit when RANDSTRUCT is enabled as it
partially defeats the hardening.
- Make the page protection setup correct for vma->page_prot
population again. The adjustment of the protections fell through
the crack during the Global bit rework and triggers warnings on
machines which do not support certain features, e.g. NX"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/64/compat: Preserve r8-r11 in int $0x80
x86/pti: Filter at vma->vm_page_prot population
x86/pti: Disallow global kernel text with RANDSTRUCT
x86/pti: Reduce amount of kernel text allowed to be Global
x86/pti: Fix boot warning from Global-bit setting
x86/pti: Fix boot problems from Global-bit setting
|
|
Currently, the bpf_current_task_under_cgroup helper has a check where if
the BPF program is running in_interrupt(), it will return -EINVAL. This
prevents the helper to be used in many useful scenarios, particularly
BPF programs attached to Perf Events.
This commit removes the check. Tested a few NMI (Perf Event) and some
softirq context, the helper returns the correct result.
Signed-off-by: Teng Qin <qinteng@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Two fixes from the timer departement:
- Fix a long standing issue in the NOHZ tick code which causes RB
tree corruption, delayed timers and other malfunctions. The cause
for this is code which modifies the expiry time of an enqueued
hrtimer.
- Revert the CLOCK_MONOTONIC/CLOCK_BOOTTIME unification due to
regression reports. Seems userspace _is_ relying on the documented
behaviour despite our hope that it wont"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert: Unify CLOCK_MONOTONIC and CLOCK_BOOTTIME
tick/sched: Do not mess with an enqueued hrtimer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"The perf update contains the following bits:
x86:
- Prevent setting freeze_on_smi on PerfMon V1 CPUs to avoid #GP
perf stat:
- Keep the '/' event modifier separator in fallback, for example when
fallbacking from 'cpu/cpu-cycles/' to user level only, where it
should become 'cpu/cpu-cycles/u' and not 'cpu/cpu-cycles/:u' (Jiri
Olsa)
- Fix PMU events parsing rule, improving error reporting for invalid
events (Jiri Olsa)
- Disable write_backward and other event attributes for !group events
in a group, fixing, for instance this group: '{cycles,msr/aperf/}:S'
that has leader sampling (:S) and where just the 'cycles', the
leader event, should have the write_backward attribute set, in this
case it all fails because the PMU where 'msr/aperf/' lives doesn't
accepts write_backward style sampling (Jiri Olsa)
- Only fall back group read for leader (Kan Liang)
- Fix core PMU alias list for x86 platform (Kan Liang)
- Print out hint for mixed PMU group error (Kan Liang)
- Fix duplicate PMU name for interval print (Kan Liang)
Core:
- Set main kernel end address properly when reading kernel and module
maps (Namhyung Kim)
perf mem:
- Fix incorrect entries and add missing man options (Sangwon Hong)
s/390:
- Remove s390 specific strcmp_cpuid_cmp function (Thomas Richter)
- Adapt 'perf test' case record+probe_libc_inet_pton.sh for s390
- Fix s390 undefined record__auxtrace_init() return value in 'perf
record' (Thomas Richter)"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Don't enable freeze-on-smi for PerfMon V1
perf stat: Fix duplicate PMU name for interval print
perf evsel: Only fall back group read for leader
perf stat: Print out hint for mixed PMU group error
perf pmu: Fix core PMU alias list for X86 platform
perf record: Fix s390 undefined record__auxtrace_init() return value
perf mem: Document incorrect and missing options
perf evsel: Disable write_backward for leader sampling group events
perf pmu: Fix pmu events parsing rule
perf stat: Keep the / modifier separator in fallback
perf test: Adapt test case record+probe_libc_inet_pton.sh for s390
perf list: Remove s390 specific strcmp_cpuid_cmp function
perf machine: Set main kernel end address properly
|
|
Andrey Ignatov says:
====================
BPF helpers documentation in UAPI refers to kernel ctx structures when it
has to refer to user visible ones. Fix it.
====================
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The patch syncs bpf.h to tools/.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
