summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-10-10Merge tag 'spi-v3.12-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "This is all driver updates, mostly fixes for error handling paths except for the s3c64xx and hspi fixes for trying to use runtime PM before it is enabled and the pxa2xx fix for interactions between power management and interrupt handling" * tag 'spi-v3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: atmel: Fix incorrect error path spi/hspi: fixup Runtime PM enable timing spi/s3c64xx: Ensure runtime PM is enabled prior to registration spi/clps711x: drop clk_put for devm_clk_get in spi_clps711x_probe() spi: fix return value check in dspi_probe() spi: mpc512x: fix error return code in mpc512x_psc_spi_do_probe() spi: clps711x: Don't call kfree() after spi_master_put/spi_unregister_master spi/pxa2xx: check status register as well to determine if the device is off
2013-10-10random: allow architectures to optionally define random_get_entropy()Theodore Ts'o
Allow architectures which have a disabled get_cycles() function to provide a random_get_entropy() function which provides a fine-grained, rapidly changing counter that can be used by the /dev/random driver. For example, an architecture might have a rapidly changing register used to control random TLB cache eviction, or DRAM refresh that doesn't meet the requirements of get_cycles(), but which is good enough for the needs of the random driver. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
2013-10-10Merge tag 'for-linus-20131008' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD fixes from Brian Norris: - fix a small memory leak in some new ONFI code - account for additional odd variations of Micron SPI flash Acked by David Woodhouse. * tag 'for-linus-20131008' of git://git.infradead.org/linux-mtd: mtd: m25p80: Fix 4 byte addressing mode for Micron devices. mtd: nand: fix memory leak in ONFI extended parameter page
2013-10-10IB/mlx5: Ensure proper synchronization accessing memoryEli Cohen
Call mlx5_ib_populate_pas() before mapping the DMA buffer to ensure the hardware reads the values written by the CPU. Found by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Fix alignment of reg umr gather buffersEli Cohen
The hardware requires that gather buffers for UMR work requests be aligned to 2K. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Fix eq names to display nicely in /proc/interruptsSagi Grimberg
It's helpful for a driver to put the pci slot name in its interrupt names, so /proc/interrupts will show the pci slot of the device. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10mlx5: Fix error code translation from firmware to driverEli Cohen
Limits exceeded should be translated to ENOMEM. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Fix opt param mask according to firmware specEli Cohen
Failed to configure opt mask to configure rre from init to rtr. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10mlx5: Fix opt param mask for sq err to rts transitionEli Cohen
Add missing entry in the table for UC transport. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Disable atomic operationsEli Cohen
Currently Atomic operations don't work properly. Disable them for the time being. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10mlx5: Fix layout of struct mlx5_init_segEli Cohen
The layout of struct health_buffer was not according to firmware specification. Fix it to comply. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10mlx5: Keep polling to reclaim pages while any returnedEli Cohen
Change mlx5_reclaim_startup_pages() to keep polling while any pages are returned. If none are returned, keep polling for five more seconds before exiting with an error message. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Avoid async events on invalid port numberEli Cohen
On a single ported Connect-IB, its possible for the firmware to issue events on the non-existing 2nd port. Make sure to ignore events generated for such ports. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Decrease memory consumption of mr cachesEli Cohen
Change the logic so we do not allocate memory nor map the device before actually posting to the REG_UMR QP. In addition, unmap and free the memory after we get completion. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10mlx5: Remove checksum on command interface commandsEli Cohen
Checksum calculations consume CPU resources and can be significant to the rate of resource creation/destruction. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Fix memory leak in mlx5_ib_create_srqMoshe Lazer
The patch fixes the rollback in case of failure in creating SRQ. Signed-off-by: Moshe Lazer <moshel@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Flush cache workqueue before destroying itMoshe Lazer
Destroying the workqueue without flushing it first can lead to a case in which the kernel tries to push a delayed work to the workqueue which does not exist anymore. Signed-off-by: Moshe Lazer <moshel@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Fix send work queue size calculationEli Cohen
1. Make sure wqe_cnt does not exceed the limit published by firmware. 2. There is no requirement that the number of outstanding work requests will be a power of two. Remove the ilog2 in the calculation of sq.max_post to fix that. 3. Add case for IB_QPT_XRC_TGT in sq_overhead and return 0 as XRC target QPs do not have a send queue. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10KVM: nVMX: Fully support nested VMX preemption timerArthur Chunqi Li
This patch contains the following two changes: 1. Fix the bug in nested preemption timer support. If vmexit L2->L0 with some reasons not emulated by L1, preemption timer value should be save in such exits. 2. Add support of "Save VMX-preemption timer value" VM-Exit controls to nVMX. With this patch, nested VMX preemption timer features are fully supported. Signed-off-by: Arthur Chunqi Li <yzt356@gmail.com> Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-10drm/radeon: re-enable sw ACR support on pre-DCE4Alex Deucher
HW ACR support may have issues on some older chips, so use SW ACR for now until we've tested further. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> CC: Rafał Miłecki <zajec5@gmail.com>
2013-10-10xen: Fix possible user space selector corruptionFrediano Ziglio
Due to the way kernel is initialized under Xen is possible that the ring1 selector used by the kernel for the boot cpu end up to be copied to userspace leading to segmentation fault in the userspace. Xen code in the kernel initialize no-boot cpus with correct selectors (ds and es set to __USER_DS) but the boot one keep the ring1 (passed by Xen). On task context switch (switch_to) we assume that ds, es and cs already point to __USER_DS and __KERNEL_CSso these selector are not changed. If processor is an Intel that support sysenter instruction sysenter/sysexit is used so ds and es are not restored switching back from kernel to userspace. In the case the selectors point to a ring1 instead of __USER_DS the userspace code will crash on first memory access attempt (to be precise Xen on the emulated iret used to do sysexit will detect and set ds and es to zero which lead to GPF anyway). Now if an userspace process call kernel using sysenter and get rescheduled (for me it happen on a specific init calling wait4) could happen that the ring1 selector is set to ds and es. This is quite hard to detect cause after a while these selectors are fixed (__USER_DS seems sticky). Bisecting the code commit 7076aada1040de4ed79a5977dbabdb5e5ea5e249 appears to be the first one that have this issue. Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
2013-10-10tpm: xen-tpmfront: fix missing declaration of xen_domainRob Herring
xen-tpmfront fails to build on arm64 with the following error: drivers/char/tpm/xen-tpmfront.c: In function ‘xen_tpmfront_init’: drivers/char/tpm/xen-tpmfront.c:422:2: error: implicit declaration of function ‘xen_domain’ [-Werror=implicit-function-declaration] Add include of xen/xen.h to fix this. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Ashley Lai <adlai@linux.vnet.ibm.com> Acked-by: Ashley Lai <adlai@linux.vnet.ibm.com> Cc: Leonidas Da Silva Barbosa <leosilva@linux.vnet.ibm.com> Cc: Rajiv Andrade <mail@srajiv.net> Cc: Marcel Selhorst <tpmdd@selhorst.net> Cc: Sirrix AG <tpmdd@sirrix.com> Cc: tpmdd-devel@lists.sourceforge.net
2013-10-10kvm: ppc: booke: check range page invalidation progress on page setupBharat Bhushan
When the MM code is invalidating a range of pages, it calls the KVM kvm_mmu_notifier_invalidate_range_start() notifier function, which calls kvm_unmap_hva_range(), which arranges to flush all the TLBs for guest pages. However, the Linux PTEs for the range being flushed are still valid at that point. We are not supposed to establish any new references to pages in the range until the ...range_end() notifier gets called. The PPC-specific KVM code doesn't get any explicit notification of that; instead, we are supposed to use mmu_notifier_retry() to test whether we are or have been inside a range flush notifier pair while we have been referencing a page. This patch calls the mmu_notifier_retry() while mapping the guest page to ensure we are not referencing a page when in range invalidation. This call is inside a region locked with kvm->mmu_lock, which is the same lock that is called by the KVM MMU notifier functions, thus ensuring that no new notification can proceed while we are in the locked region. Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> Acked-by: Alexander Graf <agraf@suse.de> [Backported to 3.12 - Paolo] Reviewed-by: Bharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-10KVM: PPC: Book3S HV: Fix typo in saving DSCRPaul Mackerras
This fixes a typo in the code that saves the guest DSCR (Data Stream Control Register) into the kvm_vcpu_arch struct on guest exit. The effect of the typo was that the DSCR value was saved in the wrong place, so changes to the DSCR by the guest didn't persist across guest exit and entry, and some host kernel memory got corrupted. Cc: stable@vger.kernel.org [v3.1+] Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-10KVM: nVMX: fix shadow on EPTGleb Natapov
72f857950f6f19 broke shadow on EPT. This patch reverts it and fixes PAE on nEPT (which reverted commit fixed) in other way. Shadow on EPT is now broken because while L1 builds shadow page table for L2 (which is PAE while L2 is in real mode) it never loads L2's GUEST_PDPTR[0-3]. They do not need to be loaded because without nested virtualization HW does this during guest entry if EPT is disabled, but in our case L0 emulates L2's vmentry while EPT is enables, so we cannot rely on vmcs12->guest_pdptr[0-3] to contain up-to-date values and need to re-read PDPTEs from L2 memory. This is what kvm_set_cr3() is doing, but by clearing cache bits during L2 vmentry we drop values that kvm_set_cr3() read from memory. So why the same code does not work for PAE on nEPT? kvm_set_cr3() reads pdptes into vcpu->arch.walk_mmu->pdptrs[]. walk_mmu points to vcpu->arch.nested_mmu while nested guest is running, but ept_load_pdptrs() uses vcpu->arch.mmu which contain incorrect values. Fix that by using walk_mmu in ept_(load|save)_pdptrs. Signed-off-by: Gleb Natapov <gleb@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-10i2c: i2c-mux-pinctrl: use deferred probe when adapter not foundWolfram Sang
If it is not there yet, it might appear later. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-10-10i2c: i2c-arb-gpio-challenge: use deferred probe when adapter not foundWolfram Sang
If it is not there yet, it might appear later. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-10-10i2c: i2c-mux-gpio: use deferred probingIonut Nicu
If the i2c-parent bus driver is not loaded, returning -ENODEV will force people to unload and then reload the module again to get it working. Signed-off-by: Ionut Nicu <ioan.nicu.ext@nsn.com> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-10-10i2c: i2c-mux-gpio: don't ignore of_get_named_gpio errorsIonut Nicu
of_get_named_gpio could return -E_PROBE_DEFER or another error code. This error should be passed further instead of being ignored. Signed-off-by: Ionut Nicu <ioan.nicu.ext@nsn.com> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-10-10i2c: omap: Clear ARDY bit twiceTaras Kondratiuk
Initially commit cb527ede1bf6ff2008a025606f25344b8ed7b4ac "i2c-omap: Double clear of ARDY status in IRQ handler" added a workaround for undocumented errata ProDB0017052. But then commit 1d7afc95946487945cc7f5019b41255b72224b70 "i2c: omap: ack IRQ in parts" refactored code and missed one of ARDY clearings. So current code violates errata. It causes often i2c bus timeouts on my Pandaboard. This patch adds a second clearing in place. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2013-10-10i2c: Not all adapters have a parentJean Delvare
The code in acpi_i2c_register_devices() assumes that all i2c adapters have a parent. This is not necessarily the case, for example the i2c-stub driver instantiate a virtual i2c adapter without a parent. Check for this to avoid a NULL pointer deference. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-10-10i2c: i2c-stu300: replace platform_driver_probe to support deferred probingWolfram Sang
Subsystems like pinctrl and gpio rightfully make use of deferred probing at core level. Now, deferred drivers won't be retried if they don't have a .probe function specified in the driver struct. Fix this driver to have that, so the devices it supports won't get lost in a deferred probe. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-10-10i2c: i2c-mxs: replace platform_driver_probe to support deferred probingWolfram Sang
Subsystems like pinctrl and gpio rightfully make use of deferred probing at core level. Now, deferred drivers won't be retried if they don't have a .probe function specified in the driver struct. Fix this driver to have that, so the devices it supports won't get lost in a deferred probe. Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-10-10i2c: i2c-imx: replace platform_driver_probe to support deferred probingWolfram Sang
Subsystems like pinctrl and gpio rightfully make use of deferred probing at core level. Now, deferred drivers won't be retried if they don't have a .probe function specified in the driver struct. Fix this driver to have that, so the devices it supports won't get lost in a deferred probe. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-10-10i2c: i2c-designware-platdrv: replace platform_driver_probe to support ↵Wolfram Sang
deferred probing Subsystems like pinctrl and gpio rightfully make use of deferred probing at core level. Now, deferred drivers won't be retried if they don't have a .probe function specified in the driver struct. Fix this driver to have that, so the devices it supports won't get lost in a deferred probe. Reported-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-10-09drm/radeon/dpm: disable bapm on TN asicsAlex Deucher
Causes hangs on certain boards. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=70053 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-10-09drm/radeon: improve soft reset on CIKAlex Deucher
Disable CG/PG before resetting. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-10-09drm/radeon: improve soft reset on SIAlex Deucher
Disable CG/PG and stop the rlc before resetting. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-10-09drm/radeon/dpm: off by one in si_set_mc_special_registers()Dan Carpenter
These checks should be ">=" instead of ">". j is used as an offset into the table->mc_reg_address[] array and that has SMC_SISLANDS_MC_REGISTER_ARRAY_SIZE (16) elements. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-10-09drm/radeon/dpm/btc: off by one in btc_set_mc_special_registers()Dan Carpenter
It should be ">=" instead of ">" here. The table->mc_reg_address[] array has SMC_EVERGREEN_MC_REGISTER_ARRAY_SIZE (16) elements. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-10-09drm/radeon: forever loop on error in radeon_do_test_moves()Dan Carpenter
The error path does this: for (--i; i >= 0; --i) { which is a forever loop because "i" is unsigned. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-10-09drm/radeon: fix hw contexts for SUMO2 asicswojciech kapuscinski
They have 4 rather than 8. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=63599 Signed-off-by: wojciech kapuscinski <wojtask9@wp.pl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-10-09drm/radeon: fix typo in CP DMA register headersAlex Deucher
Wrong bit offset for SRC endian swapping. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-10-09drm/radeon/dpm: disable multiple UVD statesAlex Deucher
Always use the regular UVD state for now. This fixes a performance regression with UVD playback on certain APUs. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-10-09drm/radeon: use hw generated CTS/N values for audioAlex Deucher
Use the hw generated values rather than calculating them in the driver. There may be some older r6xx asics where this doesn't work correctly. This remains to be seen. See bug: https://bugs.freedesktop.org/show_bug.cgi?id=69675 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-10-09drm/radeon: fix N/CTS clock matching for audioAlex Deucher
The drm code that calculates the 1001 clocks rounds up rather than truncating. This allows the table to match properly on those modes. See bug: https://bugs.freedesktop.org/show_bug.cgi?id=69675 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-10-09drm/radeon: use 64-bit math to calculate CTS values for audio (v2)Alex Deucher
Avoid losing precision. See bug: https://bugs.freedesktop.org/show_bug.cgi?id=69675 v2: fix math as per Anssi's comments. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-10-09drm/edid: catch kmalloc failure in drm_edid_to_speaker_allocationAlex Deucher
Return -ENOMEM if the allocation fails. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2013-10-10Revert "drm/fb-helper: don't sleep for screen unblank when an oops is in ↵Dave Airlie
progress" This reverts commit 928c2f0c006bf7f381f58af2b2786d2a858ae311. This patch double applied, two checks for the price of one. Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-10-09hwmon: (applesmc) Always read until end of dataHenrik Rydberg
The crash reported and investigated in commit 5f4513 turned out to be caused by a change to the read interface on newer (2012) SMCs. Tests by Chris show that simply reading the data valid line is enough for the problem to go away. Additional tests show that the newer SMCs no longer wait for the number of requested bytes, but start sending data right away. Apparently the number of bytes to read is no longer specified as before, but instead found out by reading until end of data. Failure to read until end of data confuses the state machine, which eventually causes the crash. As a remedy, assuming bit0 is the read valid line, make sure there is nothing more to read before leaving the read function. Tested to resolve the original problem, and runtested on MBA3,1, MBP4,1, MBP8,2, MBP10,1, MBP10,2. The patch seems to have no effect on machines before 2012. Tested-by: Chris Murphy <chris@cmurf.com> Cc: stable@vger.kernel.org Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
generated by cgit (git 2.34.1) at 2025-07-16 01:07:26 +0000