Age | Commit message (Collapse) | Author |
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231117093056.873834-10-u.kleine-koenig@pengutronix.de
|
|
Currently, the helper functions are accessing mac80211 hw data from the
radio (ar) structure repeatedly. So optimize these helper functions by
storing mac80211 hw data locally and accessing it directly.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231120235812.2602198-3-quic_periyasa@quicinc.com
|
|
Currently mac80211 hw data is accessed by convert the hw to radio (ar)
structure and then radio to hw structure which is not necessary in some
places where mac80211 hw data is already present. So in that kind of
places avoid the conversion and directly access the mac80211 hw data.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231120235812.2602198-2-quic_periyasa@quicinc.com
|
|
Add 320 MHz bandwidth as a new bandwidth enum for ATH12k driver. This
is extending existing bandwidth related enums to include 320 MHz. This
is a precursor to supporting 320 MHz in the future.
Sanity test performed to confirm that there was no impact in existing
bandwidths.
Additionally update QuIC copyright to include 2023 in hal_rx.h.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00125-QCAHKSWPL_SILICONZ-1
Signed-off-by: Muna Sinada <quic_msinada@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231116221839.1303170-1-quic_msinada@quicinc.com
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231117093056.873834-9-u.kleine-koenig@pengutronix.de
|
|
We are seeing below error randomly in the case where only
one MSI vector is configured:
kernel: ath11k_pci 0000:03:00.0: wmi command 16387 timeout
The reason is, currently, in ath11k_pcic_ext_irq_enable(),
ATH11K_FLAG_EXT_IRQ_ENABLED is set before NAPI is enabled.
This results in a race condition: after
ATH11K_FLAG_EXT_IRQ_ENABLED is set but before NAPI enabled,
CE interrupt breaks in. Since IRQ is shared by CE and data
path, ath11k_pcic_ext_interrupt_handler() is also called
where we call disable_irq_nosync() to disable IRQ. Then
napi_schedule() is called but it does nothing because NAPI
is not enabled at that time, meaning
ath11k_pcic_ext_grp_napi_poll() will never run, so we have
no chance to call enable_irq() to enable IRQ back. Finally
we get above error.
Fix it by setting ATH11K_FLAG_EXT_IRQ_ENABLED after all
NAPI and IRQ work are done. With the fix, we are sure that
by the time ATH11K_FLAG_EXT_IRQ_ENABLED is set, NAPI is
enabled.
Note that the fix above also introduce some side effects:
if ath11k_pcic_ext_interrupt_handler() breaks in after NAPI
enabled but before ATH11K_FLAG_EXT_IRQ_ENABLED set, nothing
will be done by the handler this time, the work will be
postponed till the next time the IRQ fires.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231117003919.26218-1-quic_bqiang@quicinc.com
|
|
The misspelled pauload member of struct ath11k_htc_record is unused,
so remove it.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231127-flexarray-htc_record-v1-3-6be1f36126fd@quicinc.com
|
|
Transform the zero-length arrays in ath10k_htc_record into proper
flexible arrays via the DECLARE_FLEX_ARRAY() macro. This helps with
ongoing efforts to globally enable -Warray-bounds.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231127-flexarray-htc_record-v1-2-6be1f36126fd@quicinc.com
|
|
The misspelled pauload member of struct ath10k_htc_record is unused,
so remove it.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231127-flexarray-htc_record-v1-1-6be1f36126fd@quicinc.com
|
|
Update the copyright for all ath10k files modified on behalf of
Qualcomm Innovation Center, Inc. in 2021 through 2023.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231128-ath12kcopyrights-v1-3-be0b7408cbac@quicinc.com
|
|
Update the copyright for all ath11k files modified on behalf of
Qualcomm Innovation Center, Inc. in 2021 through 2023.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231128-ath12kcopyrights-v1-2-be0b7408cbac@quicinc.com
|
|
Update the copyright for all ath12k files modified on behalf of
Qualcomm Innovation Center, Inc. in 2023.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231128-ath12kcopyrights-v1-1-be0b7408cbac@quicinc.com
|
|
ath9k_htc_txstatus()
Fix an array-index-out-of-bounds read in ath9k_htc_txstatus(). The bug
occurs when txs->cnt, data from a URB provided by a USB device, is
bigger than the size of the array txs->txstatus, which is
HTC_MAX_TX_STATUS. WARN_ON() already checks it, but there is no bug
handling code after the check. Make the function return if that is the
case.
Found by a modified version of syzkaller.
UBSAN: array-index-out-of-bounds in htc_drv_txrx.c
index 13 is out of range for type '__wmi_event_txstatus [12]'
Call Trace:
ath9k_htc_txstatus
ath9k_wmi_event_tasklet
tasklet_action_common
__do_softirq
irq_exit_rxu
sysvec_apic_timer_interrupt
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231113065756.1491991-1-linuxlovemin@yonsei.ac.kr
|
|
No need cast (void *) to (struct owl_ctx *), (struct ath_hw *),
(struct cmd_buf *) or other types.
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230919045226.524544-1-yunchuan@nfschina.com
|
|
Currently data path Rxdma ring structure store the IDR buffer and lock.
These IDR handling is needed only for SW cookie conversion and not
needed for HW cookie conversion. REO Rxdma ring use the HW cookie
conversion and monitor Rxdma ring use the SW cookie conversion.
Since idr not needed for REO Rxdma ring, remove the IDR data entity
from the data path Rxdma ring structure. Introduce the new data path ring
structure for monitor rxmda rings since it need IDR data entity.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00125-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231111043934.20485-5-quic_periyasa@quicinc.com
|
|
Currently Rxdma replenish require HW conversion argument which is
unnecessary argument since ath12k driver configures the Rxdma only
in HW conversion. To optimize the rx data path per packet, avoid
the explicit unnecessary argument and condition check in the rx
replenish.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00125-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231111043934.20485-4-quic_periyasa@quicinc.com
|
|
Currently all Rxdma replenish callers pass the same return
buffer manager id argument, so make it implicitly. To
optimize the rx data path per packet, avoid the explicit
unnecessary argument in Rxdma replenish function.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00125-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231111043934.20485-3-quic_periyasa@quicinc.com
|
|
Currently all Rxdma replenish callers pass zero for the mac id
argument, so make it as zero implicitly. To optimize the rx
data path per packet, avoid the explicit unnecessary argument
in Rxdma replenish function.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00125-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231111043934.20485-2-quic_periyasa@quicinc.com
|
|
When the core rfkill config throws error, it should free the
allocated resources. Currently it is not freeing the core pdev
create resources. Avoid this issue by calling the core pdev
destroy in the error handler of core rfkill config.
Found this issue in the code review and it is compile tested only.
Fixes: 004ccbc0dd49 ("wifi: ath12k: add support for hardware rfkill for WCN7850")
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231111040107.18708-1-quic_periyasa@quicinc.com
|
|
Let ath12k select this option automatically which makes building
more intuitive if the user enables this driver (rather than the
driver not building unless CRYPTO_MICHAEL_MIC is explicitly enabled).
Further investigation shows that ath11k and ath12k are the only who use
'depends on' with CRYPTO_MICHAEL_MIC:
./drivers/net/wireless/intel/ipw2x00/Kconfig: select CRYPTO_MICHAEL_MIC
./drivers/net/wireless/intersil/hostap/Kconfig: select CRYPTO_MICHAEL_MIC
./drivers/net/wireless/intersil/orinoco/Kconfig: select CRYPTO_MICHAEL_MIC
./drivers/net/wireless/ath/ath11k/Kconfig: depends on CRYPTO_MICHAEL_MIC
./drivers/net/wireless/ath/ath12k/Kconfig: depends on CRYPTO_MICHAEL_MIC
./drivers/staging/rtl8192e/Kconfig: select CRYPTO_MICHAEL_MIC
./drivers/staging/ks7010/Kconfig: select CRYPTO_MICHAEL_MIC
Signed-off-by: James Prestwood <prestwoj@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231113153544.282461-2-prestwoj@gmail.com
|
|
Let ath11k select this option automatically which makes building
more intuitive if the user enables this driver (rather than the
driver not building unless CRYPTO_MICHAEL_MIC is explicitly enabled).
Further investigation shows that ath11k and ath12k are the only who use
'depends on' with CRYPTO_MICHAEL_MIC:
./drivers/net/wireless/intel/ipw2x00/Kconfig: select CRYPTO_MICHAEL_MIC
./drivers/net/wireless/intersil/hostap/Kconfig: select CRYPTO_MICHAEL_MIC
./drivers/net/wireless/intersil/orinoco/Kconfig: select CRYPTO_MICHAEL_MIC
./drivers/net/wireless/ath/ath11k/Kconfig: depends on CRYPTO_MICHAEL_MIC
./drivers/net/wireless/ath/ath12k/Kconfig: depends on CRYPTO_MICHAEL_MIC
./drivers/staging/rtl8192e/Kconfig: select CRYPTO_MICHAEL_MIC
./drivers/staging/ks7010/Kconfig: select CRYPTO_MICHAEL_MIC
Signed-off-by: James Prestwood <prestwoj@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231113153544.282461-1-prestwoj@gmail.com
|
|
Currently wmi.h has two separate set of definitions for peer
flags. One set of flags is defined in enum wmi_tlv_peer_flags, and,
except for the last three, are named WMI_TLV_PEER_*. The other set of
flags are defined as macros, and are named WMI_PEER_*. The last three
macros have the same name as the last three wmi_tlv_peer_flags
enumerators.
The code only uses the WMI_PEER_* names; the WMI_TLV_PEER_* names are
unused. So as a first step in consolidation, remove all the
WMI_TLV_PEER_* names.
But since having an enum to define all the flags is actually a good
thing since that provides a handle by which to refer to the entire set
of flags, recast the WMI_PEER_* macros into enumerators.
Compile tested only.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231106-ath-peer-flags-v1-4-781e83b7e8e8@quicinc.com
|
|
Currently wmi.h has two separate set of definitions for peer
flags. One set of flags is defined in enum wmi_tlv_peer_flags, and,
except for the last three, are named WMI_TLV_PEER_*. The other set of
flags are defined as macros, and are named WMI_PEER_*. The last three
macros have the same name as the last three wmi_tlv_peer_flags
enumerators.
The code only uses the WMI_PEER_* names; the WMI_TLV_PEER_* names are
unused. So as a first step in consolidation, remove all the
WMI_TLV_PEER_* names.
But since having an enum to define all the flags is actually a good
thing since that provides a handle by which to refer to the entire set
of flags, recast the WMI_PEER_* macros into enumerators.
Compile tested only.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231106-ath-peer-flags-v1-3-781e83b7e8e8@quicinc.com
|
|
Currently both struct ath12k_wmi_pdev and struct ath12k_wmi_base
define:
const struct wmi_peer_flags_map *peer_flags;
But that member is not used, and in fact, struct wmi_peer_flags_map
is not defined within ath12k; these are obsolete remnants inherited
from ath11k. So remove them.
Compile tested only.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231106-ath-peer-flags-v1-2-781e83b7e8e8@quicinc.com
|
|
Currently both struct ath11k_pdev_wmi and struct ath11k_wmi_base
define:
const struct wmi_peer_flags_map *peer_flags;
But that member is not used, and in fact, struct wmi_peer_flags_map
is not defined within ath11k; these are obsolete remnants inherited
from ath10k. So remove them.
Compile tested only.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231106-ath-peer-flags-v1-1-781e83b7e8e8@quicinc.com
|
|
Currently struct ath12k defines the following member:
struct ieee80211_ops *ops;
This is being flagged by checkpatch.pl:
WARNING: struct ieee80211_ops should normally be const
The original plan was to add the const qualifier. However, it turns
out this is actually unused, so remove it.
No functional changes, compile tested only.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231106-ath12k-remove-ieee80211_ops-v1-2-d72cef1a855b@quicinc.com
|
|
Currently struct ath11k defines the following member:
struct ieee80211_ops *ops;
This is being flagged by checkpatch.pl:
WARNING: struct ieee80211_ops should normally be const
The original plan was to add the const qualifier. However, it turns
out this is actually unused, so remove it.
No functional changes, compile tested only.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231106-ath12k-remove-ieee80211_ops-v1-1-d72cef1a855b@quicinc.com
|
|
struct ath10k_htc_frame is unused, and since it illogically contains
two consecutive flexible arrays, it could never be used, so remove it.
No functional changes, compile tested only.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231103-ath10k_htc_frame-v1-1-ff00b38a9630@quicinc.com
|
|
Since 'ieee80211_txq_get_depth()' allows NULL for 2nd and
3rd arguments, simplify '__ath10k_htt_tx_txq_recalc()' by
dropping unused 'frame_cnt'. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231102115459.69791-1-dmantipov@yandex.ru
|
|
./drivers/net/wireless/ath/ath11k/fw.c:136:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7073
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231030060225.28987-1-yang.lee@linux.alibaba.com
|
|
If we already have gotten the rproc_handle (meaning the "qcom,rproc"
property is defined in the devicetree), it's a valid state that the
remoteproc module hasn't probed yet so we should defer probing instead
of just failing to probe.
This resolves a race condition when the ath11k driver probes and fails
before the wpss remoteproc driver has probed, like the following:
[ 6.232360] ath11k 17a10040.wifi: failed to get rproc
[ 6.232366] ath11k 17a10040.wifi: failed to get rproc: -22
[ 6.232478] ath11k: probe of 17a10040.wifi failed with error -22
...
[ 6.252415] remoteproc remoteproc2: 8a00000.remoteproc is available
[ 6.252776] remoteproc remoteproc2: powering up 8a00000.remoteproc
[ 6.252781] remoteproc remoteproc2: Booting fw image qcom/qcm6490/fairphone5/wpss.mdt, size 7188
So, defer the probe if we hit that so we can retry later once the wpss
remoteproc is available.
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-01264-QCAMSLSWPLZ-1.37886.3
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231027-ath11k-rproc-defer-v1-1-f6b6a812cd18@fairphone.com
|
|
strncpy() is deprecated [1] and we should prefer less ambiguous
interfaces.
In this case, arvif->u.ap.ssid has its length maintained by
arvif->u.ap.ssid_len which indicates it may not need to be
NUL-terminated. Make this explicit with __nonstring and use a plain old
memcpy.
This is also consistent with future copies into arvif->u.ap.ssid:
if (changed & BSS_CHANGED_SSID &&
vif->type == NL80211_IFTYPE_AP) {
arvif->u.ap.ssid_len = vif->cfg.ssid_len;
if (vif->cfg.ssid_len)
memcpy(arvif->u.ap.ssid, vif->cfg.ssid,
vif->cfg.ssid_len);
arvif->u.ap.hidden_ssid = info->hidden_ssid;
}
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231024-strncpy-drivers-net-wireless-ath-ath10k-mac-c-v2-1-4c1f4cd4b4df@google.com
|
|
Since 'user_stats' is a fixed-size array of 'struct htt_ppdu_user_stats'
in 'struct htt_ppdu_stats', any of its member can't be NULL and so
relevant check may be dropped.
Signed-off-by: Ma Ke <make_ruc2021@163.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231013074711.2202850-1-make_ruc2021@163.com
|
|
No need cast (void *) to (struct net_device *).
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231020093432.214001-1-yunchuan@nfschina.com
|
|
ath.git patches for v6.7.
Major changes:
ath12k
* QCN9274: mesh support
ath11k
* firmware-2.bin support
|
|
This reverts commit e149353e6562f3e3246f75dfc4cca6a0cc5b4efc. The commit caused
QCA6390 hw2.0 firmware WLAN.HST.1.0.1-05266-QCAHSTSWPLZ_V2_TO_X86-1 to crash
during disconnect:
[71990.787525] ath11k_pci 0000:72:00.0: firmware crashed: MHI_CB_EE_RDDM
Closes: https://lore.kernel.org/all/87edhu3550.fsf@kernel.org/
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20231023164120.651151-1-kvalo@kernel.org
|
|
Currently, the logic to return an ath12k_sta pointer, given a
ieee80211_sta pointer, uses typecasting throughout the driver. In
general, conversion functions are preferable to typecasting since
using a conversion function allows the compiler to validate the types
of both the input and output parameters.
ath12k already defines a conversion function ath12k_vif_to_arvif() for
a similar conversion. So introduce ath12k_sta_to_arsta() for this use
case, and convert all of the existing typecasting to use this
function.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231019-upstream-ath12k_sta_to_arsta-v1-1-06f06f693338@quicinc.com
|
|
The ath12k active pdevs are protected by RCU but the htt mlo-offset
event handling code calling ath12k_mac_get_ar_by_pdev_id() was not
marked as a read-side critical section.
Mark the code in question as an RCU read-side critical section to avoid
any potential use-after-free issues.
Compile tested only.
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Cc: stable@vger.kernel.org # v6.2
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231019113650.9060-3-johan+linaro@kernel.org
|
|
The ath12k active pdevs are protected by RCU but the DFS-radar and
temperature event handling code calling ath12k_mac_get_ar_by_pdev_id()
was not marked as a read-side critical section.
Mark the code in question as RCU read-side critical sections to avoid
any potential use-after-free issues.
Note that the temperature event handler looks like a place holder
currently but would still trigger an RCU lockdep splat.
Compile tested only.
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Cc: stable@vger.kernel.org # v6.2
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231019113650.9060-2-johan+linaro@kernel.org
|
|
The ath11k active pdevs are protected by RCU but the gtk offload status
event handling code calling ath11k_mac_get_arvif_by_vdev_id() was not
marked as a read-side critical section.
Mark the code in question as an RCU read-side critical section to avoid
any potential use-after-free issues.
Compile tested only.
Fixes: a16d9b50cfba ("ath11k: support GTK rekey offload")
Cc: stable@vger.kernel.org # 5.18
Cc: Carl Huang <quic_cjhuang@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231019155342.31631-1-johan+linaro@kernel.org
|
|
The ath11k active pdevs are protected by RCU but the htt pktlog handling
code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a
read-side critical section.
Mark the code in question as an RCU read-side critical section to avoid
any potential use-after-free issues.
Compile tested only.
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Cc: stable@vger.kernel.org # 5.6
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231019112521.2071-1-johan+linaro@kernel.org
|
|
The ath11k active pdevs are protected by RCU but the DFS radar event
handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a
read-side critical section.
Mark the code in question as an RCU read-side critical section to avoid
any potential use-after-free issues.
Compile tested only.
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Cc: stable@vger.kernel.org # 5.6
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231019153115.26401-3-johan+linaro@kernel.org
|
|
The ath11k active pdevs are protected by RCU but the temperature event
handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a
read-side critical section as reported by RCU lockdep:
=============================
WARNING: suspicious RCU usage
6.6.0-rc6 #7 Not tainted
-----------------------------
drivers/net/wireless/ath/ath11k/mac.c:638 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
no locks held by swapper/0/0.
...
Call trace:
...
lockdep_rcu_suspicious+0x16c/0x22c
ath11k_mac_get_ar_by_pdev_id+0x194/0x1b0 [ath11k]
ath11k_wmi_tlv_op_rx+0xa84/0x2c1c [ath11k]
ath11k_htc_rx_completion_handler+0x388/0x510 [ath11k]
Mark the code in question as an RCU read-side critical section to avoid
any potential use-after-free issues.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Fixes: a41d10348b01 ("ath11k: add thermal sensor device support")
Cc: stable@vger.kernel.org # 5.7
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231019153115.26401-2-johan+linaro@kernel.org
|
|
In PCI and HAL interface layer module, the identifier sc is used
to represent an instance of ath12k_base structure. However,
within ath12k, the convention is to use "ab" to represent an SoC
"base" struct. So change the all instances of sc to ab.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00125-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231018153008.29820-3-quic_periyasa@quicinc.com
|
|
In WMI layer module, the identifier wmi_sc is used to represent
an instance of ath12k_wmi_base structure. However, within ath12k,
the convention is to use "ab" to represent an SoC "base" struct.
So change the all instances of wmi_sc to wmi_ab.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00125-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231018153008.29820-2-quic_periyasa@quicinc.com
|
|
Firmware IE containers can dynamically provide various information
what firmware supports. Also it can embed more than one image so
updating firmware is easy, user just needs to update one file in
/lib/firmware/.
The firmware API 2 or higher will use the IE container format, the
current API 1 will not use the new format but it still is supported
for some time. Firmware API 2 files are named as firmware-2.bin
(which contains both amss.bin and m3.bin images) and API 1 files are
amss.bin and m3.bin.
Currently ath11k PCI driver provides firmware binary (amss.bin) path to
MHI driver, MHI driver reads firmware from filesystem and boots it. Add
provision to read firmware files from ath11k driver and provide the amss.bin
firmware data and size to MHI using a pointer.
Currently enum ath11k_fw_features is empty, the patches adding features will
add the flags.
With AHB devices there's no amss.bin or m3.bin, so no changes in how AHB
firmware files are used. But AHB devices can use future additions to the meta
data, for example in enum ath11k_fw_features.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9
Co-developed-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: Anilkumar Kolli <quic_akolli@quicinc.com>
Co-developed-by: Kalle Valo <quic_kvalo@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230727100430.3603551-4-kvalo@kernel.org
|
|
Simple refactoring to make it easier to add firmware-2.bin support in the
following patch.
Earlier ath11k_qmi_m3_load() supported changing m3.bin contents while ath11k is
running. But that's not going to actually work, m3.bin is supposed to be the
same during the lifetime of ath11k, for example we don't support changing the
firmware capabilities on the fly. Due to this ath11k requests m3.bin firmware
file first and only then checks m3_mem->vaddr, so we are basically requesting
the firmware file even if it's not needed. Reverse the code so that m3_mem
buffer is checked first, and only if it doesn't exist, then m3.bin is requested
from user space.
Checking for m3_mem->size is redundant when m3_mem->vaddr is NULL, we would
not be able to use the buffer in that case. So remove the check for size.
Simplify the exit handling and use 'goto out'.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230727100430.3603551-3-kvalo@kernel.org
|
|
When compiling with clang-18, I've noticed the following:
drivers/net/wireless/realtek/rtw89/fw.c:389:28: warning: cast to smaller
integer type 'enum rtw89_fw_type' from 'const void *' [-Wvoid-pointer-to-enum-cast]
389 | enum rtw89_fw_type type = (enum rtw89_fw_type)data;
| ^~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/realtek/rtw89/fw.c:569:13: warning: cast to smaller
integer type 'enum rtw89_rf_path' from 'const void *' [-Wvoid-pointer-to-enum-cast]
569 | rf_path = (enum rtw89_rf_path)data;
| ^~~~~~~~~~~~~~~~~~~~~~~~
So avoid brutal everything-to-const-void-and-back casts, introduce
'union rtw89_fw_element_arg' to pass parameters to element handler
callbacks, and adjust all of the related bits accordingly. Compile
tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231020040940.33154-1-dmantipov@yandex.ru
|
|
1. Move MT7620 PA/LNA calibration code to dedicated functions.
2. For external PA/LNA devices, restore RF and BBP registers before
R-Calibration.
3. Do Rx DCOC calibration again before RXIQ calibration.
4. Add some missing LNA related registers' initialization.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/TYAP286MB0315979F92DC563019B8F238BCD4A@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM
|
|
1. Move the channel configuration code from rt2800_vco_calibration()
to the rt2800_config_channel().
2. Use MT7620 SoC specific AGC initial LNA value instead of the
RT5592's value.
3. BBP{195,196} pairing write has been replaced with
rt2800_bbp_glrt_write() to reduce redundant code.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/TYAP286MB0315622A4340BFFA530B1B86BCD4A@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM
|