summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-12-31ARM: dts: at91: acme/g25: use TCB0 as timersAlexandre Belloni
Use tcb0 for timers as selected in at91_dt_defconfig. Cc: Sergio Tanzilli <tanzilli@acmesystems.it> Cc: Douglas Gilbert <dgilbert@interlog.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9x5cm: use TCB0 as timersAlexandre Belloni
Use tcb0 for timers as selected in at91_dt_defconfig. [tested on at91sam9x25ek and at91sam9x35ek] Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9x5: TC blocks are also simple-mfd and syscon devicesAlexandre Belloni
Add simple-mfd and syscon to the TC blocks to allow to register one of the channels as clocksource properly at boot time and free up the remaining channels for other use. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9n12ek: use TCB0 as timersAlexandre Belloni
Use tcb0 for timers as selected in at91_dt_defconfig. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9n12: TC blocks are also simple-mfd and syscon devicesAlexandre Belloni
Add simple-mfd and syscon to the TC blocks to allow to register one of the channels as clocksource properly at boot time and free up the remaining channels for other use. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9rlek: use TCB0 as timersAlexandre Belloni
Use tcb0 for timers as selected in at91_dt_defconfig. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9rl: TC blocks are also simple-mfd and syscon devicesAlexandre Belloni
Add simple-mfd and syscon to the TC blocks to allow to register one of the channels as clocksource properly at boot time and free up the remaining channels for other use. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: pm9g45: use TCB0 as timersAlexandre Belloni
Use tcb0 for timers as selected in at91_dt_defconfig. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9m10g45ek: use TCB0 as timersAlexandre Belloni
Use tcb0 for timers as selected in at91_dt_defconfig. Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9g45: TC blocks are also simple-mfd and syscon devicesAlexandre Belloni
Add simple-mfd and syscon to the TC blocks to allow to register one of the channels as clocksource properly at boot time and free up the remaining channels for other use. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: calao: use TCB0 as timersAlexandre Belloni
Use tcb0 for timers as selected in at91_dt_defconfig. [tested on usb_a9g20 and usb_a9263] Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9263ek: use TCB0 as timersAlexandre Belloni
Use tcb0 for timers as selected in at91_dt_defconfig. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9263: TC blocks are also simple-mfd and syscon devicesAlexandre Belloni
Add simple-mfd and syscon to the TC blocks to allow to register one of the channels as clocksource properly at boot time and free up the remaining channels for other use. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9261ek: use TCB0 as timersAlexandre Belloni
Use tcb0 for timers as selected in at91_dt_defconfig. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9261: TC blocks are also simple-mfd and syscon devicesAlexandre Belloni
Add simple-mfd and syscon to the TC blocks to allow to register one of the channels as clocksource properly at boot time and free up the remaining channels for other use. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: ge863-pro3: use TCB0 as timersAlexandre Belloni
Use tcb0 for timers as selected in at91_dt_defconfig. Cc: Fabio Porcedda <fabio.porcedda@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9g20ek: use TCB0 as timersAlexandre Belloni
Use tcb0 for timers as selected in at91_dt_defconfig. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: kizbox: use TCB0 as timersAlexandre Belloni
Use tcb0 for timers as selected in at91_dt_defconfig. Cc: Antoine Aubert <a.aubert@overkiz.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: animeo_ip: use TCB0 as timersAlexandre Belloni
Use tcb0 for timers as selected in at91_dt_defconfig. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: foxg20: use TCB0 as timersAlexandre Belloni
Use tcb0 for timers as selected in at91_dt_defconfig. Cc: Sergio Tanzilli <tanzilli@acmesystems.it> Cc: Douglas Gilbert <dgilbert@interlog.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: ethernut5: use TCB0 as timersAlexandre Belloni
Use tcb0 for timers as selected in at91_dt_defconfig. Cc: Martin Reimann <martin.reimann@egnite.de> Cc: Tim Schendekehl <tim.schendekehl@egnite.de> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: sam9_l9260: use TCB0 as timersAlexandre Belloni
Use tcb0 for timers as selected in at91_dt_defconfig. Cc: Raashid Muhammed <raashidmuhammed@zilogic.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9260ek: use TCB0 as timersAlexandre Belloni
Use tcb0 for timers as selected in at91_dt_defconfig. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9260: TC blocks are also simple-mfd and syscon devicesAlexandre Belloni
Add simple-mfd and syscon to the TC blocks to allow to register one of the channels as clocksource properly at boot time and free up the remaining channels for other use. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: mpa1600: use TCB0 as timersAlexandre Belloni
Use tcb0 for timers as selected in at91_dt_defconfig. Cc: Joachim Eastwood <manabian@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91rm9200ek: use TCB0 for timersAlexandre Belloni
Use tcb0 for timers like selected in at91_dt_defconfig. Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91rm9200: TC blocks are also simple-mfd and syscon devicesAlexandre Belloni
Add simple-mfd and syscon to the TC blocks to allow to register one of the channels as clocksource properly at boot time and free up the remaining channels for other use. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: at91: Document new TCB bindingsAlexandre Belloni
The current binding for the TCB is not flexible enough for some use cases and prevents proper utilization of all the channels. Acked-by: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: Remove leading 0x and 0s from bindings notationMathieu Malaterre
Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" and Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C For simplicity, two sed expressions were used to solve each warnings separately. To make the regex expression more robust a few other issues were resolved, namely setting unit-address to lower case, and adding a whitespace before the the opening curly brace: https://elinux.org/Device_Tree_Linux#Linux_conventions This will solve as a side effect warning: Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>" This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation") Reported-by: David Daney <ddaney@caviumnetworks.com> Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: introduce the sama5d2 ptc ek boardLudovic Desroches
Add the official SAMA5D2 Peripheral Touch Controller Evaluation Kit board. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-29arm64: dts: uniphier: enable more serial ports for PXs3 ref boardMasahiro Yamada
The serial pins of PXs3 SoC are not multiplexed with any other functions. Enable serial2 and serial3 on the PXs3 reference board because I see the connectors on the board. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-28arm64: dts: uniphier: add has-transaction-translator property to usb node ↵Kunihiko Hayashi
for LD11 When a full/low speed device is connected to USB 2.0 port on UniPhier SoC that has ehci controller, the kernel shows the following messages. | usb usb1-port1: Cannot enable. Maybe the USB cable is bad? | usb usb1-port1: Cannot enable. Maybe the USB cable is bad? | usb usb1-port1: Cannot enable. Maybe the USB cable is bad? | usb usb1-port1: unable to enumerate USB device To fix the issue, the driver needs to enable Transaction Translator on ehci root hub. This adds 'has-transaction-translator' property to each node. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-27ARM: dts: uniphier: add has-transaction-translator property to usb node for ↵Kunihiko Hayashi
LD4, sLD8 and Pro4 When a full/low speed device is connected to USB 2.0 port on UniPhier SoC that has ehci controller, the kernel shows the following messages. | usb usb1-port1: Cannot enable. Maybe the USB cable is bad? | usb usb1-port1: Cannot enable. Maybe the USB cable is bad? | usb usb1-port1: Cannot enable. Maybe the USB cable is bad? | usb usb1-port1: unable to enumerate USB device To fix the issue, the driver needs to enable Transaction Translator on ehci root hub. This adds 'has-transaction-translator' property to each node. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-23Revert "ARM: dts: dra7: Add properties to enable PCIe x2 lane mode"Tony Lindgren
This reverts commit 4ece93c020e3ee19767b1c111be39fe7e32f8bf2. The device tree binding for these is still being discussed. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-22arm: dts: owl-s500: Add SparkyAndreas Färber
Add a Device Tree for the Allo.com Sparky SBC. Acked-by: Sudeep Kumar <sudeepkumar@cem-solutions.net> [AF: Adjusted SPDX-License-Identifier style] Signed-off-by: Andreas Färber <afaerber@suse.de>
2017-12-22arm64: dts: actions: Add S700 and CubieBoard7Andreas Färber
Add Device Trees for S700 SoC and Cubietech CubieBoard7. Signed-off-by: Andreas Färber <afaerber@suse.de>
2017-12-22arm64: dts: hisilicon: Add hi3660 cpu capacity-dmips-mhz informationValentin Schneider
The following dt entries are added: cpus [0-3] (Cortex A53): - capacity-dmips-mhz = <592>; cpus [4-7] (Cortex A73): - capacity-dmips-mhz = <1024>; Those values were obtained by running dhrystone 2.1 on a HiKey960 with the following procedure: - Offline all CPUs but CPU0 (A53) - Set CPU0 frequency to maximum - Run Dhrystone 2.1 for 20 seconds - Offline all CPUs but CPU4 (A73) - set CPU4 frequency to maximum - Run Dhrystone 2.1 for 20 seconds The results are as follows: A53: 129633887 loops A73: 287034147 loops By scaling those values so that the A73s use 1024, we end up with 462 for the A53s. However, they have different maximum frequencies: 1.844GHz for A53s and 2.362GHz for A73s. Thus, we can scale the A53 value to truly represent dmips per MHz, and we end up with 592. The impact of this change can be verified on HiKey960: $ cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_cur_freq 1844000 1844000 1844000 1844000 2362000 2362000 2362000 2362000 $ cat /sys/devices/system/cpu/cpu*/cpu_capacity 462 462 462 462 1024 1024 1024 1024 Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-12-22arm64: dts: hi3660: improve pmu descriptionXu YiPing
cortex-a73 pmu driver is supported now. hi3660 is 4*a73 + 4*a53, so it should use "cortex-a73-pmu" and "cortex-a53-pmu" instead of "armpmu-v3", then we can use the a73 and a53 events in perf tool directly. Signed-off-by: Xu YiPing <xuyiping@hisilicon.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-12-22ARM: dts: Add TVE/TVC and ILI9322 panel to DIR-685Linus Walleij
This adds the TVE200/TVC TV-encoder and the Ilitek ILI9322 panel to the DIR-685 device tree. This brings graphics to this funky router and it is possible to even run a console on its tiny screen. Incidentally this requires us to disable the access to the parallel (NOR) flash, as the communication pins to the panel are shared with the flash memory. To access the flash, a separate kernel with the panel disabled and the flash enabled should be booted. The pin control selecting whether to use the lines cannot be altered at runtime due to hardware constraints. Cc: David Lechner <david@lechnology.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-22ARM: dts: Add PCI to WBD111 and WBD222Linus Walleij
These two boards have mini-PCI card slots, so enable PCI on both of them. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-22ARM: dts: Flags D-Link DIR-685 I2C bus gpiosLinus Walleij
These GPIOs are used in open drain mode, so make sure to flag them as such. Use the new separate scl/sda line GPIO bindings. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-22ARM: dts: r8a7745: Add missing clock for secondary CA7 CPU coreBiju Das
Add the missing clock to CA7 CPU1 node. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-21Merge tag 'v4.16-rockchip-dts64-1' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Pull "Rockchip dts64 changes for 4.16" from Heiko Stübner: General RK3399 gets Mipi nodes, fixes for usb3 support and better support for the type-c phys. The Kevin Chromebooks based on rk3399 now can use their internal edp displays. RK3328 gets its efuse node and Mali450 gpu node, which actually produces already some nice results with the WIP Lima driver. * tag 'v4.16-rockchip-dts64-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Add efuse device node for RK3328 SoC arm64: dts: rockchip: add rk3328 mali gpu node dt-bindings: gpu: mali-utgard: add rockchip,rk3328-mali compatible arm64: dts: rockchip: add extcon nodes and enable tcphy rk3399-gru arm64: dts: rockchip: add usb3-phy otg-port support for rk3399 arm64: dts: rockchip: add reset property for dwc3 controllers on rk3399 arm64: dts: rockchip: add the aclk_usb3 clocks for USB3 on rk3399 arm64: dts: rockchip: add pd_usb3 power-domain node for rk3399 arm64: dts: rockchip: Enable edp disaplay on kevin arm64: dts: rockchip: update mipi cells for RK3399 arm64: dts: rockchip: add mipi_dsi1 support for rk3399 arm64: dts: rockchip: add rk3399 DSI0 reset
2017-12-21Merge tag 'v4.16-rockchip-dts32-1' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Pull "Rockchip dts32 changes for 4.16" from Heiko Stübner: Just the reset property for the rk3066a-rayeager emac phy * tag 'v4.16-rockchip-dts32-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: add reset property for rk3066a-rayeager emac phy
2017-12-21ARM: dts: msm8974-FP2: Add uSD slot nodesLuca Weiss
Add and enable the sdhci2 slot and the pinctrl configuration. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-12-21Merge tag 'v4.15-next-dts64' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/dt Pull "arm64: Updates of aarch64 DTS for v4.15-next" from Matthias Brugger - mt8173 add cpufreq related nodes supply nodes frequency/voltage operation table - mt2712 add cpufreq related nodes fixed regulator supply nodes frequency/voltage operation table - mt2712 add clock contoller nodes - mt2712 add scpsys node * tag 'v4.15-next-dts64' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm64: dts: Add power controller device node of MT2712 arm64: dts: mediatek: add mt2712 cpufreq related device nodes arm64: dts: mt2712: Add clock controller device nodes arm64: dts: mediatek: add mt8173 cpufreq related device nodes dt-bindings: soc: add MT2712 power dt-bindings
2017-12-21Merge tag 'v4.15-next-dts32' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/dt Pull "arm: Updates of armv7 DTS for v4.15-next" from Matthias Brugger: - add reset cells mt2701 and mt7623 ethsys - update mmc nodes for mt7623 - mt7623 change mmc card detection pin to active low - mt7623 set unit address to lower case * tag 'v4.15-next-dts32' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: dt-bindings: ARM: Mediatek: Fix ethsys documentation arm: mt7: dts: Remove leading 0x and 0s from bindings notation arm: dts: mt7623: fix card detection issue on bananapi-r2 arm: dts: mt7623: update mmc related nodes with the appropriate fallback arm: dts: mt2701: Add reset-cells arm: dts: mt7623: Update ethsys binding
2017-12-21Merge tag 'tegra-for-4.16-arm64-dt' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Pull "arm64: tegra: Changes for v4.16-rc1" from Thierry Reding: This set of patches enables a bunch of new features on Jetson TX2 that were finally unblocked by the GPIO driver getting merged for v4.15. * tag 'tegra-for-4.16-arm64-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Use sor1_out clock arm64: tegra: Fix SD write-protect polarity on Jetson TX2 arm64: tegra: Add CPU and PSCI nodes for NVIDIA Tegra210 platforms arm64: tegra: Enable HDMI on Jetson TX2 arm64: tegra: Mark I2C4 as DDC on P3310 arm64: tegra: Add display nodes on Tegra186 arm64: tegra: Add SMMU node for Tegra186 arm64: tegra: Enable memory controller on P3310 arm64: tegra: Add memory controller on Tegra186 arm64: tegra: Add FUSE block on Tegra186 arm64: tegra: Add MISC registers on Tegra186
2017-12-21Merge tag 'tegra-for-4.16-arm-dt' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Pull "ARM: tegra: Device tree changes for v4.16-rc1" from Thierry Reding: These changes enable the video decoder engine found on Tegra20 SoCs. * tag 'tegra-for-4.16-arm-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Add video decoder on Tegra20 ARM: tegra: Add device tree node to describe IRAM on Tegra20
2017-12-21Merge tag 'tegra-for-4.16-dt-bindings' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Pull "dt-bindings: Updates for v4.16-rc1" from Thierry Reding: This contains a set of patches that extend existing bindings with support for Tegra186. * tag 'tegra-for-4.16-dt-bindings' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: memory: Add Tegra186 support dt-bindings: misc: Add Tegra186 MISC registers bindings
generated by cgit (git 2.34.1) at 2025-07-16 03:03:46 +0000