summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-11-16Merge tag 'imx-fixes-rc' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Arnd Bergmann
fixes From Sascha Hauer <s.hauer@pengutronix.de>: ARM i.MX fixes for 3.7-rc * tag 'imx-fixes-rc' of git://git.pengutronix.de/git/imx/linux-2.6: ARM: imx: ehci: fix host power mask bit ARM i.MX: fix error-valued pointer dereference in clk_register_gate2() Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 patches from Martin Schwidefsky: "Some more bug fixes and a config change. The signal bug is nasty, if the clock_gettime vdso function is interrupted by a signal while in access-register-mode we end up with an endless signal loop until the signal stack is full. The config change is for aligned struct pages, gives us 8% improvement with hackbench." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/3215: fix tty close handling s390/mm: have 16 byte aligned struct pages s390/gup: fix access_ok() usage in __get_user_pages_fast() s390/gup: add missing TASK_SIZE check to get_user_pages_fast() s390/topology: fix core id vs physical package id mix-up s390/signal: set correct address space control
2012-11-16Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "All pretty normal: one TTM oops fix, one radeon, a few intel and a vmwgfx fix." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/ttm: remove unneeded preempt_disable/enable ttm: Clear the ttm page allocated from high memory zone correctly vmwgfx: return an -EFAULT if copy_to_user() fails drm/radeon: fix logic error in atombios_encoders.c drm/i915: do not ignore eDP bpc settings from vbt drm/i915/sdvo: clean up connectors on intel_sdvo_init() failures drm/i915/crt: fix DPMS standby and suspend mode handling
2012-11-16Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linuxLinus Torvalds
Pull another clk layer fix from Michael Turquette: "GCC 4.7 users get compilation errors from unnecessary use of inline in clk-provider.h. This pull request fixes the regression by removing inline usage from those function declarations." * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux: clk: remove inline usage from clk-provider.h
2012-11-16staging: Add SystemBase Multi-2/PCI driverSteven Rostedt
I ported the driver supplied by SystemBase to mainline. As the driver had MODULE_LICENSE("GPL") it is declared as a GPL module and thus I have the right to distribute it upstream. Note, I did the bare minimum to get it working. It still needs a lot of loving. Cc: hjchoi <hjchoi@sysbas.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16ARM: imx: ehci: fix host power mask bitChristoph Fritz
This patch sets HPM (Host power mask bit) to bit 16 according to i.MX Reference Manual. Falsely it was set to bit 8, but this controls pull-up Impedance. Reported-by: Michael Burkey <mdburkey@gmail.com> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Acked-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-16ARM i.MX: fix error-valued pointer dereference in clk_register_gate2()Wei Yongjun
The error-valued pointer clk is used for the arg of kfree, it should be kfree(gate) if clk_register() return ERR_PTR(). dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-16ARM: dts: enable dma support for auart0 in mx28Huang Shijie
enable the dma support for auart0 in mx28. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16serial: mxs-auart: add the DMA support for mx28Huang Shijie
Only we meet the following conditions, we can enable the DMA support for auart: (1) We enable the DMA support in the dts file, such as arch/arm/boot/dts/imx28.dtsi. (2) We enable the hardware flow control. (3) We use the mx28, not the mx23. Due to hardware bug(see errata: 2836), we can not add the DMA support to mx23. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16serial: mxs-auart: distinguish the different SOCsHuang Shijie
The current mxs-auart driver is used for both mx23 and mx28. But in mx23, the DMA has a bug(see errata:2836). We can not add the DMA support in mx23, but we can add DMA support to auart in mx28. So in order to add the DMA support for the auart in mx28, we should distinguish the distinguish SOCs. This patch adds a new platform_device_id table and a inline function is_imx28_auart() to distinguish the mx23 and mx28. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16tty/8250_early: Turn serial_in/serial_out into weak symbols.Noam Camus
Allows overriding default methods serial_in/serial_out. In such platform specific replacement it is possible to use other regshift, biased register offset, any other manipulation that is not covered with common default methods. Overriding default methods may be useful for platforms which got serial peripheral with registers represented in big endian. In this situation and assuming that 32 bit operations / alignment is required then it may be useful to swab words before/after accessing the serial registers. Signed-off-by: Noam Camus <noamc@ezchip.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16ARM: at91/usbh: fix overcurrent gpio setupJohan Hovold
Use gpio_is_valid also for overcurrent pins (which are currently negative in many board files). Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-11-16ARM: at91/AT91SAM9G45: fix crypto peripherals irq issue due to sparse irq ↵Nicolas Royer
support Spare irq support introduced by commit 8fe82a5 (ARM: at91: sparse irq support) involves to add the NR_IRQS_LEGACY offset to irq number. Signed-off-by: Nicolas Royer <nicolas@eukrea.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Eric Bénard <eric@eukrea.com> Tested-by: Eric Bénard <eric@eukrea.com> Cc: stable@vger.kernel.org # 3.6
2012-11-16batman-adv: process broadcast packets in BLA earlierAntonio Quartulli
The logic in the BLA mechanism may decide to drop broadcast packets because the node may still be in the setup phase. For this reason, further broadcast processing like the early client detection mechanism must be done only after the BLA check. This patches moves the invocation to BLA before any other broadcast processing. This was introduced 30cfd02b60e1cb16f5effb0a01f826c5bb7e4c59 ("batman-adv: detect not yet announced clients") Reported-by: Glen Page <glen.page@thet.net> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-11-16batman-adv: don't add TEMP clients belonging to other backbone nodesAntonio Quartulli
The "early client detection" mechanism must not add clients belonging to other backbone nodes. Such clients must be reached by directly using the LAN instead of the mesh. This was introduced by 30cfd02b60e1cb16f5effb0a01f826c5bb7e4c59 ("batman-adv: detect not yet announced clients") Reported-by: Glen Page <glen.page@thet.net> Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-11-16batman-adv: correctly pass the client flag on tt_responseAntonio Quartulli
When a TT response with the full table is sent, the client flags should be sent as well. This patch fix the flags assignment when populating the tt_response to send back This was introduced by 30cfd02b60e1cb16f5effb0a01f826c5bb7e4c59 ("batman-adv: detect not yet announced clients") Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-11-16batman-adv: fix tt_global_entries flags updateAntonio Quartulli
Flags carried by a change_entry have to be always copied into the client entry as they may contain important attributes (e.g. TT_CLIENT_WIFI). For instance, a client added by means of the "early detection mechanism" has no flag set at the beginning, so they must be updated once the proper ADD event is received. This was introduced by 30cfd02b60e1cb16f5effb0a01f826c5bb7e4c59 ("batman-adv: detect not yet announced clients") Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-11-16tilegx: request_irq with a non-null device nameSimon Marchi
This patch simply makes the tilegx net driver call request_irq with a non-null name. It makes the output in /proc/interrupts more obvious, but also helps tools that don't expect to find null there. Signed-off-by: Simon Marchi <simon.marchi@polymtl.ca> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-15serial: sh-sci: fix possible race cases on SCSCR register accessesShinya Kuribayashi
In the previous commit, console write function (serial_console_write) is changed to disable SCI interrupts while printing console strings. This introduces possible race cases in the serial startup / shutdown functions on SMP systems. This patch fixes the sh-sci in the same way as commit 9ec1882df2 (tty: serial: imx: console write routing is unsafe on SMP, from Xinyu Chen <xinyu.chen@freescale.com>, 2012-08-27) did. There could be several consumers of the console, * the kernel printk * the init process using /dev/kmsg to call printk to show log * shell, which opens /dev/console and writes with sys_write() The shell goes into the normal UART open() and write() system calls, while the other two go into the console operations. The open() call invokes serial startup function (sci_startup), which will write to the SCSCR register (to enable or disable SCI interrupts) without any locking. This will conflict with the console serial function. Add spinlock protections in sci_startup() and sci_shutdown() properly. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15serial: sh-sci: add locking to console write function to avoid SMP lockupShinya Kuribayashi
Symptom: When entering the suspend with Android logcat running, printk() call gets stuck and never returns. The issue can be observed at printk()s on nonboot CPUs when going to offline with their interrupts disabled, and never seen at boot CPU (core0 in our case). Details: serial_console_write() lacks of appropriate spinlock handling. In SMP systems, as long as sci_transmit_chars() is being processed at one CPU core, serial_console_write() can stuck at the other CPU core(s), when it tries to access to the same serial port _without_ a proper locking. serial_console_write() waits for the transmit FIFO getting empty, while sci_transmit_chars() writes data to the FIFO. In general, peripheral interrupts are routed to boot CPU (core0) by Linux ARM standard affinity settings. SCI(F) interrupts are handled by core0, so sci_transmit_chars() is processed on core0 as well. When logcat is running, it writes enormous log data to the kernel at every moment, forever. So core0 can repeatedly continue to process sci_transmit_chars() in its interrupt handler, which eventually makes the other CPU core(s) stuck at serial_console_write(). Looking at serial/8250.c, this is a known console write lockup issue with SMP kernels. Fix the sh-sci driver in the same way 8250.c does. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15serial: sh-sci: fix common SCIFB regmap definitionTakashi Yoshii
About FIFO count, there are two variants of SCIFs which show a) TX count in upper, RX count in lower byte of FDR register b) TX count in TFDR register, RX count in RFDR register Common SCIFB regmap in current source code is defined as "a". At least 7372 and 73a0 HW manual say their SICFB are "b". This patch alters the definition to "b", considering the current one has come from a mistake. The reason is as follows. The flag SCIFB sh-sci driver means it has 256 byte FIFO. The count is from 0(empty) to 256(full), that makes 9-bit. Because FDR is 16-bit register, it can not hold two 9-bits. That's why, SCIFB can not be "a". Signed-off-by: Takashi Yoshii <takashi.yoshii.zj@renesas.com> Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15serial: sh-sci: mask SCTFDR/RFDR according to fifosizeTakashi Yoshii
Current mask 0xff to SCTFDR/RFDR damages SCIFB, because the registers on SCIFB have 9-bit data (0 to 256). This patch changes the mask according to port->fifosize. Though I'm not sure if the mask is really needed (I don't know if there are variants which have non-zero upper bits), it is safer. Signed-off-by: Takashi Yoshii <takashi.yoshii.zj@renesas.com> Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15serial: sh-sci: support lower baud rateTakashi Yoshii
Support prescaler 1/16 and 1/64, in addition to current 1 and 1/4. Supporting below 2400bps was dropped long time ago in mainline. Since then, setting lower rate has been resulting in erroneous register value, without indicating any errors through API. This patch adds more prescaler to support lower rates again. This still doesn't check range, but we won't hit the case because even 50bps at 48MHz clock is now supported. Signed-off-by: Takashi Yoshii <takashi.yoshii.zj@renesas.com> Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15serial: sh-sci: fix condition test to set SCBRRTakashi Yoshii
SCBRR == 0 is valid value (divide by 1). Signed-off-by: Takashi Yoshii <takashi.yoshii.zj@renesas.com> Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15serial: sh-sci: console runtime PM support (revisit)Teppei Kamijou
The commit 1ba7622094 (serial: sh-sci: console Runtime PM support, from Magnus Damm <damm@opensource.se>, 2011-08-03), tried to support console runtime PM, but unfortunately it didn't work for us for some reason. We did not investigated further at that time, instead would like to propose a different approach. In Linux tty/serial world, to get console PM work properly, a serial client driver does not have to maintain .runtime_suspend()/..resume() calls itself, but can leave console power power management handling to the serial core driver. This patch moves the sh-sci driver in that direction. Notes: * There is room to optimize console runtime PM more aggressively by maintaining additional local runtime PM calls, but as a first step having .pm() operation would suffice. * We still have a couple of direct calls to sci_port_enable/..disable left in the driver. We have to live with them, because they're out of serial core's help. Signed-off-by: Teppei Kamijou <teppei.kamijou.yb@renesas.com> Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15Partially revert "serial: sh-sci: console Runtime PM support"Shinya Kuribayashi
This partially reverts commit 1ba7622094 (serial: sh-sci: console Runtime PM support, from Magnus Damm <damm@opensource.se>, 2011-08-03). The generic 'serial_core' can take care of console PM maintenance, so all (or at least the first thing) we have to do to get console PM work properly, is to implement uart_ops ->pm() operation in the sh-sci serial client driver. This patch partially reverts the commit above, but leaving sci_reset() change in place, because sci_reset() is already part of another commit (73c3d53f38 serial: sh-sci: Avoid FIFO clear for MCE toggle.). A revised version of console PM support follows next. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15Revert "sh-sci / PM: Use power.irq_safe"Shinya Kuribayashi
This reverts commit 5a50a01bf0 (sh-sci / PM: Use power.irq_safe, from Rafael J. Wysocki <rjw@sisk.pl>, 2011-08-24). In order to get console PM work properly, we should implement uart_ops ->pm() operation, rather than sprinkle band-ading runtime PM calls in the driver. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15Revert "sh-sci / PM: Avoid deadlocking runtime PM"Shinya Kuribayashi
This reverts commit 048be431e4 (sh-sci / PM: Avoid deadlocking runtime PM, from Rafael J. Wysocki <rjw@sisk.pl>, 2012-03-09). In order to get console PM work properly, we should implement uart_ops ->pm() operation, rather than sprinkle band-ading runtime PM calls in the driver. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15TTY: call tty_port_destroy in the rest of driversJiri Slaby
After commit "TTY: move tty buffers to tty_port", the tty buffers are not freed in some drivers. This is because tty_port_destructor is not called whenever a tty_port is freed. This was an assumption I counted with but was unfortunately untrue. So fix the drivers to fulfil this assumption. To be sure, the TTY buffers (and later some stuff) are gone along with the tty_port, we have to call tty_port_destroy at tear-down places. This is mostly where the structure containing a tty_port is freed. This patch does exactly that -- put tty_port_destroy at those places. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15TTY: isicom, fix tty buffers memory leakJiri Slaby
After commit "TTY: move tty buffers to tty_port", the tty buffers are not freed in some drivers. This is because tty_port_destructor is not called whenever a tty_port is freed. This was an assumption I counted with but was unfortunately untrue. So fix the drivers to fulfil this assumption. This one is special as we need more work to be done. Previously, the tty_port was initialized at module load time, but to be able to destroy the port and init it again, we now do the initialization in probe and destroy in remove. I.e. at more appropriate places for that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15TTY: introduce tty_port_destroyJiri Slaby
After commit "TTY: move tty buffers to tty_port", the tty buffers are not freed in some drivers. This is because tty_port_destructor is not called whenever a tty_port is freed. This was an assumption I counted with but was unfortunately untrue. Those using refcounting are safe now, but for those which do not we introduce a function to be called right before the tty_port is freed by the drivers. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15TTY: n_gsm, use kref from tty_portJiri Slaby
After commit "TTY: move tty buffers to tty_port", the tty buffers are not freed in some drivers. This is because tty_port_destructor is not called whenever a tty_port is freed. This was an assumption I counted with but was unfortunately untrue. So fix the drivers to fulfil this assumption. Here it is enough to switch to refcounting in tty_port. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15MMC: sdio, use kref from tty_portJiri Slaby
After commit "TTY: move tty buffers to tty_port", the tty buffers are not freed in some drivers. This is because tty_port_destructor is not called whenever a tty_port is freed. This was an assumption I counted with but was unfortunately untrue. So fix the drivers to fulfil this assumption. Here it is enough to switch to refcounting in tty_port. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15MMC: sdio_uart, remove unused member from sdio_uart_portJiri Slaby
tty from struct sdio_uart_port is unused. Proper refcounted tty in tty_port->tty is used instead. So remove the member from that structure. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15ISDN: capi, use kref from tty_portJiri Slaby
After commit "TTY: move tty buffers to tty_port", the tty buffers are not freed in some drivers. This is because tty_port_destructor is not called whenever a tty_port is freed. This was an assumption I counted with but was unfortunately untrue. So fix the drivers to fulfil this assumption. Here it is enough to switch to refcounting in tty_port. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15TTY: pty, fix tty buffers leakJiri Slaby
After commit "TTY: move tty buffers to tty_port", the tty buffers are not freed in some drivers. This is because tty_port_destructor is not called whenever a tty_port is freed. This was an assumption I counted with but was unfortunately untrue. So fix the drivers to fulfil this assumption. PTY is one of those, here we just need to use tty_port_put instead of kfree. (Assuming tty_port_destructor does not need port->ops to be set which we change here too.) Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15TTY: isicom, stop using port->ttyJiri Slaby
Do not access unsafe port->tty pointer when we have a safe tty already. Use the safe one. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15tty/serial/ar933x_uart: fix baud rate calculationGabor Juhos
The UART of the AR933x SoC implements a fractional divisor for generating the desired baud rate. The current code uses a fixed value for the fractional part of the divisor, and this leads to improperly calculated baud rates: baud scale step real baud diff 300 5207* 8192 17756 17456 5818.66% 600 2603* 8192 35511 34911 5818.50% 1200 1301* 8192 71023 69823 5818.58% 2400 650* 8192 11241 8841 368.37% 4800 324* 8192 22645 17845 371.77% 9600 161 8192 9645 45 0.46% 14400 107 8192 14468 68 0.47% 19200 80 8192 19290 90 0.46% 28800 53 8192 28935 135 0.46% 38400 39 8192 39063 663 1.72% 57600 26 8192 57870 270 0.46% 115200 12 8192 120192 4992 4.33% 230400 5 8192 260417 30017 13.02% 460800 2 8192 520833 60033 13.02% 921600 0 8192 1562500 640900 69.93% After the patch, the integer and fractional parts of the divisor will be calculated dynamically. This ensures that the UART will use correct baud rates: baud scale step real baud diff 300 6 11 300 0 0.00% 600 54 173 600 0 0.00% 1200 30 195 1200 0 0.00% 2400 30 390 2400 0 0.00% 4800 48 1233 4800 0 0.00% 9600 78 3976 9600 0 0.00% 14400 98 7474 14400 0 0.00% 19200 55 5637 19200 0 0.00% 28800 130 19780 28800 0 0.00% 38400 36 7449 38400 0 0.00% 57600 78 23857 57600 0 0.00% 115200 43 26575 115200 0 0.00% 230400 23 28991 230400 0 0.00% 460800 11 28991 460800 0 0.00% 921600 5 28991 921599 -1 0.00% Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15mm, oom: ensure sysrq+f always passes valid zonelistDavid Rientjes
With hotpluggable and memoryless nodes, it's possible that node 0 will not be online, so use the first online node's zonelist rather than hardcoding node 0 to pass a zonelist with all zones to the oom killer. Signed-off-by: David Rientjes <rientjes@google.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15serial: Unneeded ARCH dependencies are removedAlexander Shiyan
This patch performs a small cleanup tty/Serial/Kconfig file by removing unneeded ARCH dependencies. This dependencies already included in board/type symbols. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15serial: mfd: Add nmi_touch_watchdog() into the console write functionFeng Tang
This is following what 8250 driver is doing in console write function, to avoid the hardware lockup case. v2: incldudes the <linux/nmi.h> Signed-off-by: Feng Tang <feng.tang@intel.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15serial: bfin-uart: avoid dead lock in rx irq handler in smp kernelSteven Miao
Disabing dma irq and lock bottom half in smp kernel doesn't ensure exclusive uart access. Call spin_lock_irqsave() instead. Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15serial: cast before shifting on port ioAlan Cox
Without this we will shift data into oblivion and give wrong results on some configurations Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15serial: xilinx_uartps: kill CONFIG_OF conditionalJosh Cartwright
The Zynq platform requires the use of CONFIG_OF. Remove the #ifdef conditionals in the uartps driver. Make dependency explicit in Kconfig. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Tested-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15ipwireless: don't oops if we run out of spaceAlan Cox
Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=49851 Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15moxa: dcd handling of CLOCAL is backwardsAlan Cox
We should do hangup on dcd loss if CLOCAL is false not true. Signed-off-by: Alan Cox <alan@linux.intel.com> Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=49911 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15serial: ifx6x60: ifx_spi_write don't need to do mrdy_assert when fifo is not ↵Jun Chen
empty This patch check whether the fifo lenth is empty before writing new data to fifo.If condition is true,ifx_spi_write need to trigger one mrdy_assert. If condition is false,the mrdy_assert will be trigger by the next ifx_spi_io. Cc: Bi Chao <chao.bi@intel.com> Signed-off-by: Chen Jun <jun.d.chen@intel.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15serial:ifx6x60:SPI header is decoded incorrectlychao bi
This patch is to correct the bit mapping of "MORE" and "CTS" in SPI frame header. Per SPI protocol, SPI header is encoded with length of 4 byte, which is defined as below: bit 0 ~ 11: current data size; bit 12: "MORE" bit; bit 13: reserve bit 14 ~ 15: reserve bit 16 ~ 27: next data size bit 28: RI bit 29: DCD bit 30: CTS/RTS bit 31: DSR/DTR According to above SPI header structure, the bit mapping of "MORE" and "CTS" is incorrect in function ifx_spi_decode_spi_header(); Cc: Chen Jun <jun.d.chen@intel.com> Signed-off-by: channing <chao.bi@intel.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel writes: Just a few small things to fix regressions, somehow all patches from Jani: - Fix dpms confusion about which platforms support intermediate modes on vga. - Revert the "ignore vbt for eDP bpc" patch, it breaks machines. This will annoy mbp retina owners again, but windows machines seem to _really_ depend upon this. We can try to quirk the mbp retinas again in 3.8 and backport the patch. - Fix connector leaks when the sdvo setup failed, resulted in an OOPS later on when trying to probe that connector (with it's encoder kfree'd already). * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: do not ignore eDP bpc settings from vbt drm/i915/sdvo: clean up connectors on intel_sdvo_init() failures drm/i915/crt: fix DPMS standby and suspend mode handling
2012-11-16Merge branch 'drm-fixes-3.7' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Just a single radeon fix from Alex. * 'drm-fixes-3.7' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix logic error in atombios_encoders.c
generated by cgit (git 2.34.1) at 2025-07-15 13:14:19 +0000